From 7ce8c54e2ba89059d28790550a8f74907b54b916 Mon Sep 17 00:00:00 2001 From: Stefan Reinauer Date: Fri, 2 Dec 2005 21:52:30 +0000 Subject: 1201_ht_bus0_dev0_fidvid_core.diff https://openbios.org/roundup/linuxbios/issue41 Lord have mercy upon us. git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2118 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/arch/i386/Config.lb | 22 +- src/arch/i386/include/arch/hlt.h | 2 +- src/arch/i386/include/arch/romcc_io.h | 32 +- src/arch/i386/include/arch/smp/atomic.h | 4 +- src/arch/i386/include/arch/smp/spinlock.h | 6 +- src/arch/i386/lib/c_start.S | 6 +- src/arch/i386/lib/console.c | 57 +--- src/config/Options.lb | 24 ++ src/console/console.c | 5 +- src/console/printk.c | 2 +- src/console/vga_console.c | 6 +- src/cpu/amd/car/clear_1m_ram.c | 3 + src/cpu/amd/car/copy_and_run.c | 33 +- src/cpu/amd/car/disable_cache_as_ram.c | 5 +- src/cpu/amd/dualcore/Config.lb | 6 +- src/cpu/amd/dualcore/dualcore.c | 78 ++++- src/cpu/amd/dualcore/dualcore_id.c | 20 +- src/cpu/amd/model_fxx/apic_timer.c | 3 + src/cpu/amd/model_fxx/fidvid.c | 396 +++++++++++++++++++++++ src/cpu/amd/model_fxx/init_cpus.c | 35 +- src/cpu/x86/16bit/reset16.lds | 3 +- src/cpu/x86/32bit/entry32.lds | 14 - src/cpu/x86/lapic/lapic_cpu_init.c | 20 +- src/devices/device.c | 46 ++- src/devices/hypertransport.c | 94 +++++- src/devices/pci_device.c | 2 +- src/devices/pci_rom.c | 37 ++- src/include/cpu/amd/dualcore.h | 16 +- src/include/cpu/x86/lapic.h | 11 +- src/include/device/hypertransport.h | 2 +- src/include/device/pci_ids.h | 55 +++- src/northbridge/amd/amdk8/amdk8.h | 6 + src/northbridge/amd/amdk8/coherent_ht.c | 2 +- src/northbridge/amd/amdk8/debug.c | 13 + src/northbridge/amd/amdk8/early_ht.c | 35 +- src/northbridge/amd/amdk8/incoherent_ht.c | 360 +++++++++++++++++---- src/northbridge/amd/amdk8/misc_control.c | 3 +- src/northbridge/amd/amdk8/northbridge.c | 81 ++++- src/sdram/generic_sdram.c | 52 ++- src/southbridge/amd/amd8111/amd8111_early_ctrl.c | 41 +++ 40 files changed, 1307 insertions(+), 331 deletions(-) create mode 100644 src/cpu/amd/model_fxx/fidvid.c create mode 100644 src/southbridge/amd/amd8111/amd8111_early_ctrl.c (limited to 'src') diff --git a/src/arch/i386/Config.lb b/src/arch/i386/Config.lb index e9b426cc2d..ebb014f525 100644 --- a/src/arch/i386/Config.lb +++ b/src/arch/i386/Config.lb @@ -31,17 +31,17 @@ end addaction clean "rm -f romimage payload.*" if CONFIG_USE_INIT -makerule init.o - depends "$(INIT-OBJECTS)" - action "$(LD) -melf_i386 -r -o init.pre.o $(INIT-OBJECTS)" - action "$(OBJCOPY) --rename-section .text=.init.text --rename-section .data=.init.data --rename-section .rodata=.init.rodata --rename-section .rodata.str1.1=.init.rodata.str1.1 init.pre.o init.o" -end - -makerule linuxbios - depends "crt0.o init.o linuxbios_ram.rom ldscript.ld" - action "$(CC) -nostdlib -nostartfiles -static -o $@ -T ldscript.ld crt0.o init.o" - action "$(CROSS_COMPILE)nm -n linuxbios | sort > linuxbios.map" -end + makerule init.o + depends "$(INIT-OBJECTS)" + action "$(LD) -melf_i386 -r -o init.pre.o $(INIT-OBJECTS)" + action "$(OBJCOPY) --rename-section .text=.init.text --rename-section .data=.init.data --rename-section .rodata=.init.rodata --rename-section .rodata.str1.1=.init.rodata.str1.1 init.pre.o init.o" + end + + makerule linuxbios + depends "crt0.o init.o linuxbios_ram.rom ldscript.ld" + action "$(CC) -nostdlib -nostartfiles -static -o $@ -T ldscript.ld crt0.o init.o" + action "$(CROSS_COMPILE)nm -n linuxbios | sort > linuxbios.map" + end end diff --git a/src/arch/i386/include/arch/hlt.h b/src/arch/i386/include/arch/hlt.h index 23ff1aa918..3b2acf1eef 100644 --- a/src/arch/i386/include/arch/hlt.h +++ b/src/arch/i386/include/arch/hlt.h @@ -7,7 +7,7 @@ static void hlt(void) __builtin_hlt(); } #else -static inline void hlt(void) +static inline __attribute__((always_inline)) void hlt(void) { asm("hlt"); } diff --git a/src/arch/i386/include/arch/romcc_io.h b/src/arch/i386/include/arch/romcc_io.h index 1d3e603ed0..c0c2250f98 100644 --- a/src/arch/i386/include/arch/romcc_io.h +++ b/src/arch/i386/include/arch/romcc_io.h @@ -117,7 +117,7 @@ static inline int log2f(int value) typedef unsigned device_t; -static inline uint8_t pci_read_config8(device_t dev, unsigned where) +static inline __attribute__((always_inline)) uint8_t pci_read_config8(device_t dev, unsigned where) { unsigned addr; addr = dev | where; @@ -125,7 +125,7 @@ static inline uint8_t pci_read_config8(device_t dev, unsigned where) return inb(0xCFC + (addr & 3)); } -static inline uint16_t pci_read_config16(device_t dev, unsigned where) +static inline __attribute__((always_inline)) uint16_t pci_read_config16(device_t dev, unsigned where) { unsigned addr; addr = dev | where; @@ -133,7 +133,7 @@ static inline uint16_t pci_read_config16(device_t dev, unsigned where) return inw(0xCFC + (addr & 2)); } -static inline uint32_t pci_read_config32(device_t dev, unsigned where) +static inline __attribute__((always_inline)) uint32_t pci_read_config32(device_t dev, unsigned where) { unsigned addr; addr = dev | where; @@ -141,7 +141,7 @@ static inline uint32_t pci_read_config32(device_t dev, unsigned where) return inl(0xCFC); } -static inline void pci_write_config8(device_t dev, unsigned where, uint8_t value) +static inline __attribute__((always_inline)) void pci_write_config8(device_t dev, unsigned where, uint8_t value) { unsigned addr; addr = dev | where; @@ -149,7 +149,7 @@ static inline void pci_write_config8(device_t dev, unsigned where, uint8_t value outb(value, 0xCFC + (addr & 3)); } -static inline void pci_write_config16(device_t dev, unsigned where, uint16_t value) +static inline __attribute__((always_inline)) void pci_write_config16(device_t dev, unsigned where, uint16_t value) { unsigned addr; addr = dev | where; @@ -157,7 +157,7 @@ static inline void pci_write_config16(device_t dev, unsigned where, uint16_t val outw(value, 0xCFC + (addr & 2)); } -static inline void pci_write_config32(device_t dev, unsigned where, uint32_t value) +static inline __attribute__((always_inline)) void pci_write_config32(device_t dev, unsigned where, uint32_t value) { unsigned addr; addr = dev | where; @@ -180,53 +180,53 @@ static device_t pci_locate_device(unsigned pci_id, device_t dev) /* Generic functions for pnp devices */ -static inline void pnp_write_config(device_t dev, uint8_t reg, uint8_t value) +static inline __attribute__((always_inline)) void pnp_write_config(device_t dev, uint8_t reg, uint8_t value) { unsigned port = dev >> 8; outb(reg, port ); outb(value, port +1); } -static inline uint8_t pnp_read_config(device_t dev, uint8_t reg) +static inline __attribute__((always_inline)) uint8_t pnp_read_config(device_t dev, uint8_t reg) { unsigned port = dev >> 8; outb(reg, port); return inb(port +1); } -static inline void pnp_set_logical_device(device_t dev) +static inline __attribute__((always_inline)) void pnp_set_logical_device(device_t dev) { unsigned device = dev & 0xff; pnp_write_config(dev, 0x07, device); } -static inline void pnp_set_enable(device_t dev, int enable) +static inline __attribute__((always_inline)) void pnp_set_enable(device_t dev, int enable) { pnp_write_config(dev, 0x30, enable?0x1:0x0); } -static inline int pnp_read_enable(device_t dev) +static inline __attribute__((always_inline)) int pnp_read_enable(device_t dev) { return !!pnp_read_config(dev, 0x30); } -static inline void pnp_set_iobase(device_t dev, unsigned index, unsigned iobase) +static inline __attribute__((always_inline)) void pnp_set_iobase(device_t dev, unsigned index, unsigned iobase) { pnp_write_config(dev, index + 0, (iobase >> 8) & 0xff); pnp_write_config(dev, index + 1, iobase & 0xff); } -static inline uint16_t pnp_read_iobase(device_t dev, unsigned index) +static inline __attribute__((always_inline)) uint16_t pnp_read_iobase(device_t dev, unsigned index) { - return (uint16_t)((pnp_read_config(dev, index) << 8) | pnp_read_config(dev, index + 1)); + return ((uint16_t)(pnp_read_config(dev, index)) << 8) | pnp_read_config(dev, index + 1); } -static inline void pnp_set_irq(device_t dev, unsigned index, unsigned irq) +static inline __attribute__((always_inline)) void pnp_set_irq(device_t dev, unsigned index, unsigned irq) { pnp_write_config(dev, index, irq); } -static inline void pnp_set_drq(device_t dev, unsigned index, unsigned drq) +static inline __attribute__((always_inline)) void pnp_set_drq(device_t dev, unsigned index, unsigned drq) { pnp_write_config(dev, index, drq & 0xff); } diff --git a/src/arch/i386/include/arch/smp/atomic.h b/src/arch/i386/include/arch/smp/atomic.h index 7b68377c22..7061461d33 100644 --- a/src/arch/i386/include/arch/smp/atomic.h +++ b/src/arch/i386/include/arch/smp/atomic.h @@ -41,7 +41,7 @@ typedef struct { volatile int counter; } atomic_t; * Atomically increments @v by 1. Note that the guaranteed * useful range of an atomic_t is only 24 bits. */ -static __inline__ void atomic_inc(atomic_t *v) +static __inline__ __attribute__((always_inline)) void atomic_inc(atomic_t *v) { __asm__ __volatile__( "lock ; incl %0" @@ -56,7 +56,7 @@ static __inline__ void atomic_inc(atomic_t *v) * Atomically decrements @v by 1. Note that the guaranteed * useful range of an atomic_t is only 24 bits. */ -static __inline__ void atomic_dec(atomic_t *v) +static __inline__ __attribute__((always_inline)) void atomic_dec(atomic_t *v) { __asm__ __volatile__( "lock ; decl %0" diff --git a/src/arch/i386/include/arch/smp/spinlock.h b/src/arch/i386/include/arch/smp/spinlock.h index 65ad8d0673..71015452e8 100644 --- a/src/arch/i386/include/arch/smp/spinlock.h +++ b/src/arch/i386/include/arch/smp/spinlock.h @@ -40,14 +40,14 @@ typedef struct { #define spin_unlock_string \ "movb $1,%0" -static inline void spin_lock(spinlock_t *lock) +static inline __attribute__((always_inline)) void spin_lock(spinlock_t *lock) { __asm__ __volatile__( spin_lock_string :"=m" (lock->lock) : : "memory"); } -static inline void spin_unlock(spinlock_t *lock) +static inline __attribute__((always_inline)) void spin_unlock(spinlock_t *lock) { __asm__ __volatile__( spin_unlock_string @@ -55,7 +55,7 @@ static inline void spin_unlock(spinlock_t *lock) } /* REP NOP (PAUSE) is a good thing to insert into busy-wait loops. */ -static inline void cpu_relax(void) +static inline __attribute__((always_inline)) void cpu_relax(void) { __asm__ __volatile__("rep;nop": : :"memory"); } diff --git a/src/arch/i386/lib/c_start.S b/src/arch/i386/lib/c_start.S index ce13d150d7..04b5a68676 100644 --- a/src/arch/i386/lib/c_start.S +++ b/src/arch/i386/lib/c_start.S @@ -22,18 +22,20 @@ _start: leal _stack, %edi movl $_estack, %ecx subl %edi, %ecx + shrl $2, %ecx /* it is 32 bit align, right? */ xorl %eax, %eax rep - stosb + stosl /** clear bss */ leal _bss, %edi movl $_ebss, %ecx subl %edi, %ecx jz .Lnobss + shrl $2, %ecx /* it is 32 bit align, right? */ xorl %eax, %eax rep - stosb + stosl .Lnobss: /* set new stack */ diff --git a/src/arch/i386/lib/console.c b/src/arch/i386/lib/console.c index fd1b5d759e..a1f5d6f2a4 100644 --- a/src/arch/i386/lib/console.c +++ b/src/arch/i386/lib/console.c @@ -120,58 +120,8 @@ static void print_spew_hex16(unsigned short value){ __console_tx_hex16(BIOS_SPEW static void print_spew_hex32(unsigned int value) { __console_tx_hex32(BIOS_SPEW, value); } static void print_spew(const char *str) { __console_tx_string(BIOS_SPEW, str); } -/* Non inline versions.... */ -#if 0 -static void print_alert_char_(unsigned char value) NOINLINE { print_alert_char(value); } -static void print_alert_hex8_(unsigned char value) NOINLINE { print_alert_hex8(value); } -static void print_alert_hex16_(unsigned short value) NOINLINE { print_alert_hex16(value); } -static void print_alert_hex32_(unsigned int value) NOINLINE { print_alert_hex32(value); } -static void print_alert_(const char *str) NOINLINE { print_alert(str); } - -static void print_crit_char_(unsigned char value) NOINLINE { print_crit_char(value); } -static void print_crit_hex8_(unsigned char value) NOINLINE { print_crit_hex8(value); } -static void print_crit_hex16_(unsigned short value) NOINLINE { print_crit_hex16(value); } -static void print_crit_hex32_(unsigned int value) NOINLINE { print_crit_hex32(value); } -static void print_crit_(const char *str) NOINLINE { print_crit(str); } - -static void print_err_char_(unsigned char value) NOINLINE { print_err_char(value); } -static void print_err_hex8_(unsigned char value) NOINLINE { print_err_hex8(value); } -static void print_err_hex16_(unsigned short value) NOINLINE { print_err_hex16(value); } -static void print_err_hex32_(unsigned int value) NOINLINE { print_err_hex32(value); } -static void print_err_(const char *str) NOINLINE { print_err(str); } - -static void print_warning_char_(unsigned char value) NOINLINE { print_warning_char(value); } -static void print_warning_hex8_(unsigned char value) NOINLINE { print_warning_hex8(value); } -static void print_warning_hex16_(unsigned short value) NOINLINE { print_warning_hex16(value); } -static void print_warning_hex32_(unsigned int value) NOINLINE { print_warning_hex32(value); } -static void print_warning_(const char *str) NOINLINE { print_warning(str); } - -static void print_notice_char_(unsigned char value) NOINLINE { print_notice_char(value); } -static void print_notice_hex8_(unsigned char value) NOINLINE { print_notice_hex8(value); } -static void print_notice_hex16_(unsigned short value) NOINLINE { print_notice_hex16(value); } -static void print_notice_hex32_(unsigned int value) NOINLINE { print_notice_hex32(value); } -static void print_notice_(const char *str) NOINLINE { print_notice(str); } - -static void print_info_char_(unsigned char value) NOINLINE { print_info_char(value); } -static void print_info_hex8_(unsigned char value) NOINLINE { print_info_hex8(value); } -static void print_info_hex16_(unsigned short value) NOINLINE { print_info_hex16(value); } -static void print_info_hex32_(unsigned int value) NOINLINE { print_info_hex32(value); } -static void print_info_(const char *str) NOINLINE { print_info(str); } - -static void print_debug_char_(unsigned char value) NOINLINE { print_debug_char(value); } -static void print_debug_hex8_(unsigned char value) NOINLINE { print_debug_hex8(value); } -static void print_debug_hex16_(unsigned short value) NOINLINE { print_debug_hex16(value); } -static void print_debug_hex32_(unsigned int value) NOINLINE { print_debug_hex32(value); } -static void print_debug_(const char *str) NOINLINE { print_debug(str); } - -static void print_spew_char_(unsigned char value) NOINLINE { print_spew_char(value); } -static void print_spew_hex8_(unsigned char value) NOINLINE { print_spew_hex8(value); } -static void print_spew_hex16_(unsigned short value) NOINLINE { print_spew_hex16(value); } -static void print_spew_hex32_(unsigned int value) NOINLINE { print_spew_hex32(value); } -static void print_spew_(const char *str) NOINLINE { print_spew(str); } -#endif - -#else +#else +/* CONFIG_USE_INIT == 1 */ extern int do_printk(int msg_level, const char *fmt, ...); @@ -273,12 +223,13 @@ extern int do_printk(int msg_level, const char *fmt, ...); #define print_spew_hex32(HEX) printk_spew ("%08x", (HEX)) -#endif /* CONFIG_USE_INIT == 0 */ +#endif /* CONFIG_USE_INIT */ #ifndef LINUXBIOS_EXTRA_VERSION #define LINUXBIOS_EXTRA_VERSION "" #endif + static void console_init(void) { static const char console_test[] = diff --git a/src/config/Options.lb b/src/config/Options.lb index 0717d38863..857dce8c69 100644 --- a/src/config/Options.lb +++ b/src/config/Options.lb @@ -815,6 +815,30 @@ define CK804_DEVN_BASE comment "CK804 device count from 0 or 1" end +define HT_CHAIN_UNITID_BASE + default 1 + export always + comment "this will be first hypertransport device's unitid base, if sb ht chain only has one ht device, it could be 0" +end + +define HT_CHAIN_END_UNITID_BASE + default 0x20 + export always + comment "this will be unit id of the end of hypertransport chain (usually the real SB) if it is small than HT_CHAIN_UNITID_BASE, it could be 0" +end + +define SB_HT_CHAIN_UNITID_OFFSET_ONLY + default 1 + export always + comment "this will decided if only offset SB hypertransport chain" +end + +define K8_SB_HT_CHAIN_ON_BUS0 + default 0 + export always + comment "this will make SB hypertransport chain sit on bus 0" +end + define K8_HW_MEM_HOLE_SIZEK default 0 export always diff --git a/src/console/console.c b/src/console/console.c index 7f97b5c95f..86ec26d312 100644 --- a/src/console/console.c +++ b/src/console/console.c @@ -16,7 +16,7 @@ void console_init(void) struct console_driver *driver; if(get_option(&console_loglevel, "debug_level")) console_loglevel=DEFAULT_CONSOLE_LOGLEVEL; - + for(driver = console_drivers; driver < econsole_drivers; driver++) { if (!driver->init) continue; @@ -57,9 +57,10 @@ unsigned char console_rx_byte(void) struct console_driver *driver; if (!initialized) return 0; - for(driver = console_drivers; driver < econsole_drivers; driver++) + for(driver = console_drivers; driver < econsole_drivers; driver++) { if (driver->tst_byte) break; + } if (driver == econsole_drivers) return 0; while (!driver->tst_byte()); diff --git a/src/console/printk.c b/src/console/printk.c index da330c932b..01a52afc4c 100644 --- a/src/console/printk.c +++ b/src/console/printk.c @@ -25,7 +25,7 @@ int default_console_loglevel = DEFAULT_CONSOLE_LOGLEVEL; void display(char*); extern int vtxprintf(void (*)(unsigned char), const char *, va_list); -spinlock_t console_lock = SPIN_LOCK_UNLOCKED; +static spinlock_t console_lock = SPIN_LOCK_UNLOCKED; int do_printk(int msg_level, const char *fmt, ...) { diff --git a/src/console/vga_console.c b/src/console/vga_console.c index bdd56f3923..e9756c8996 100644 --- a/src/console/vga_console.c +++ b/src/console/vga_console.c @@ -15,11 +15,7 @@ static char *vidmem; int vga_line, vga_col; -#if CONFIG_CONSOLE_VGA == 1 -extern int vga_inited; // it will be changed in pci_rom.c -#else -int vga_inited = 0; -#endif +int vga_inited = 0; // it will be changed in pci_rom.c static int vga_console_inited = 0; diff --git a/src/cpu/amd/car/clear_1m_ram.c b/src/cpu/amd/car/clear_1m_ram.c index 85ba59cf73..80b215e502 100644 --- a/src/cpu/amd/car/clear_1m_ram.c +++ b/src/cpu/amd/car/clear_1m_ram.c @@ -1,5 +1,7 @@ /* by yhlu 6.2005 */ /* be warned, this file will be used core 0/node 0 only */ +static inline __attribute__((always_inline)) void clear_1m_ram(void) +{ __asm__ volatile ( /* disable cache */ @@ -51,3 +53,4 @@ "invd\n\t" ); +} diff --git a/src/cpu/amd/car/copy_and_run.c b/src/cpu/amd/car/copy_and_run.c index 89a864d4fc..9c6508b8d7 100644 --- a/src/cpu/amd/car/copy_and_run.c +++ b/src/cpu/amd/car/copy_and_run.c @@ -28,10 +28,18 @@ #define GETBIT(bb, src, ilen) GETBIT_LE32(bb, src, ilen) #endif +static inline void print_debug_cp_run(const char *strval, uint32_t val) +{ +#if CONFIG_USE_INIT + printk_debug("%s%08x\r\n", strval, val); +#else + print_debug(strval); print_debug_hex32(val); print_debug("\r\n"); +#endif +} + static void copy_and_run(unsigned cpu_reset) { uint8_t *src, *dst; - unsigned long dst_len; unsigned long ilen = 0, olen = 0, last_m_off = 1; uint32_t bb = 0; unsigned bc = 0; @@ -44,9 +52,9 @@ static void copy_and_run(unsigned cpu_reset) "leal _iseg, %1\n\t" "leal _eiseg, %2\n\t" "subl %1, %2\n\t" - : "=a" (src), "=b" (dst), "=c" (dst_len) + : "=a" (src), "=b" (dst), "=c" (olen) ); - memcpy(src, dst, dst_len); + memcpy(src, dst, olen); #else __asm__ volatile ( @@ -55,13 +63,10 @@ static void copy_and_run(unsigned cpu_reset) : "=a" (src) , "=b" (dst) ); -#if CONFIG_USE_INIT - printk_debug("src=%08x\r\n",src); - printk_debug("dst=%08x\r\n",dst); -#else - print_debug("src="); print_debug_hex32(src); print_debug("\r\n"); - print_debug("dst="); print_debug_hex32(dst); print_debug("\r\n"); -#endif + print_debug_cp_run("src=",(uint32_t)src); + print_debug_cp_run("dst=",(uint32_t)dst); + +// dump_mem(src, src+0x100); for(;;) { unsigned int m_off, m_len; @@ -105,11 +110,9 @@ static void copy_and_run(unsigned cpu_reset) } #endif // dump_mem(dst, dst+0x100); -#if CONFIG_USE_INIT - printk_debug("linxbios_ram.bin length = %08x\r\n", olen); -#else - print_debug("linxbios_ram.bin length = "); print_debug_hex32(olen); print_debug("\r\n"); -#endif + + print_debug_cp_run("linxbios_ram.bin length = ", olen); + print_debug("Jumping to LinuxBIOS.\r\n"); if(cpu_reset == 1 ) { diff --git a/src/cpu/amd/car/disable_cache_as_ram.c b/src/cpu/amd/car/disable_cache_as_ram.c index a699cae99b..06a558f413 100644 --- a/src/cpu/amd/car/disable_cache_as_ram.c +++ b/src/cpu/amd/car/disable_cache_as_ram.c @@ -1,11 +1,12 @@ /* by yhlu 6.2005 */ /* be warned, this file will be used other cores and core 0 / node 0 */ +static inline __attribute__((always_inline)) void disable_cache_as_ram(void) +{ __asm__ volatile ( /* FIXME : backup stack in CACHE_AS_RAM into mmx and sse and after we get STACK up, we restore that. It is only needed if we want to go back */ - /* We don't need cache as ram for now on */ /* disable cache */ "movl %cr0, %eax\n\t" @@ -42,5 +43,5 @@ "movl %cr0, %eax\n\t" "andl $0x9fffffff,%eax\n\t" "movl %eax, %cr0\n\t" - ); +} diff --git a/src/cpu/amd/dualcore/Config.lb b/src/cpu/amd/dualcore/Config.lb index dd8dd09963..acc5d2e2f8 100644 --- a/src/cpu/amd/dualcore/Config.lb +++ b/src/cpu/amd/dualcore/Config.lb @@ -1,5 +1 @@ -uses CONFIG_LOGICAL_CPUS - -if CONFIG_LOGICAL_CPUS - object amd_sibling.o -end +object amd_sibling.o diff --git a/src/cpu/amd/dualcore/dualcore.c b/src/cpu/amd/dualcore/dualcore.c index 3923891678..e2158424e6 100644 --- a/src/cpu/amd/dualcore/dualcore.c +++ b/src/cpu/amd/dualcore/dualcore.c @@ -1,31 +1,72 @@ /* 2004.12 yhlu add dual core support */ + +#ifndef SET_NB_CFG_54 + #define SET_NB_CFG_54 1 +#endif + #include "cpu/amd/dualcore/dualcore_id.c" static inline unsigned get_core_num_in_bsp(unsigned nodeid) { - return ((pci_read_config32(PCI_DEV(0, 0x18+nodeid, 3), 0xe8)>>12) & 3); + uint32_t dword; + dword = pci_read_config32(PCI_DEV(0, 0x18+nodeid, 3), 0xe8); + dword >>= 12; + dword &= 3; + return dword; } -static inline uint8_t set_apicid_cpuid_lo(void) +#if SET_NB_CFG_54 == 1 +static inline uint8_t set_apicid_cpuid_lo(void) { if(is_cpu_pre_e0()) return 0; // pre_e0 can not be set - - if(read_option(CMOS_VSTART_dual_core, CMOS_VLEN_dual_core, 0) != 0) { // disable dual_core - return 0; - } - - // set the NB_CFG[54]=1; why the OS will be happy with that ??? + // set the NB_CFG[54]=1; why the OS will be happy with that ??? msr_t msr; msr = rdmsr(NB_CFG_MSR); msr.hi |= (1<<(54-32)); // InitApicIdCpuIdLo wrmsr(NB_CFG_MSR, msr); return 1; +} +#else + +static inline void set_apicid_cpuid_lo(void) { } + +#endif +static inline void real_start_other_core(unsigned nodeid) +{ + uint32_t dword; + // set PCI_DEV(0, 0x18+nodeid, 3), 0x44 bit 27 to redirect all MC4 accesses and error logging to core0 + dword = pci_read_config32(PCI_DEV(0, 0x18+nodeid, 3), 0x44); + dword |= 1<<27; // NbMcaToMstCpuEn bit + pci_write_config32(PCI_DEV(0, 0x18+nodeid, 3), 0x44, dword); + // set PCI_DEV(0, 0x18+nodeid, 0), 0x68 bit 5 to start core1 + dword = pci_read_config32(PCI_DEV(0, 0x18+nodeid, 0), 0x68); + dword |= 1<<5; + pci_write_config32(PCI_DEV(0, 0x18+nodeid, 0), 0x68, dword); } +//it is running on core0 of node0 +static inline void start_other_cores(void) +{ + unsigned nodes; + unsigned nodeid; + + if(read_option(CMOS_VSTART_dual_core, CMOS_VLEN_dual_core, 0) != 0) { // disable dual_core + return; + } + + nodes = get_nodes(); + + for(nodeid=0; nodeid 0) { + real_start_other_core(nodeid); + } + } + +} #if USE_DCACHE_RAM == 0 static void do_k8_init_and_stop_secondaries(void) { @@ -62,7 +103,26 @@ static void do_k8_init_and_stop_secondaries(void) pci_write_config32(dev_f0, 0x68, val); /* Set the lapicid */ - lapic_write(LAPIC_ID,(0x10 + id.coreid*0x10 + id.nodeid) << 24); + #if (ENABLE_APIC_EXT_ID == 1) + unsigned initial_apicid = get_initial_apicid(); + #if LIFT_BSP_APIC_ID == 0 + if( initial_apicid != 0 ) // other than bsp + #endif + { + /* use initial apic id to lift it */ + uint32_t dword = lapic_read(LAPIC_ID); + dword &= ~(0xff<<24); + dword |= (((initial_apicid + APIC_ID_OFFSET) & 0xff)<<24); + + lapic_write(LAPIC_ID, dword); + } + + #if LIFT_BSP_APIC_ID == 1 + bsp_apicid += APIC_ID_OFFSET; + #endif + + #endif + /* Remember the cpuid */ if (id.coreid == 0) { diff --git a/src/cpu/amd/dualcore/dualcore_id.c b/src/cpu/amd/dualcore/dualcore_id.c index a1a898a4fa..389969795b 100644 --- a/src/cpu/amd/dualcore/dualcore_id.c +++ b/src/cpu/amd/dualcore/dualcore_id.c @@ -1,26 +1,27 @@ /* 2004.12 yhlu add dual core support */ #include +#include +#ifdef __ROMCC__ #include +#endif -static inline unsigned int read_nb_cfg_54(void) +//called by bus_cpu_scan too +unsigned int read_nb_cfg_54(void) { msr_t msr; msr = rdmsr(NB_CFG_MSR); return ( ( msr.hi >> (54-32)) & 1); } -struct node_core_id { - unsigned nodeid:8; - unsigned coreid:8; -}; - -static inline unsigned get_initial_apicid(void) +static inline unsigned get_initial_apicid(void) { return ((cpuid_ebx(1) >> 24) & 0xf); } -static inline struct node_core_id get_node_core_id(unsigned nb_cfg_54) { +//called by amd_siblings too +struct node_core_id get_node_core_id(unsigned nb_cfg_54) +{ struct node_core_id id; // get the apicid via cpuid(1) ebx[27:24] if( nb_cfg_54) { @@ -45,6 +46,7 @@ static inline unsigned get_core_num(void) } static inline struct node_core_id get_node_core_id_x(void) { - return get_node_core_id( read_nb_cfg_54() ); + + return get_node_core_id( read_nb_cfg_54() ); // for pre_e0() nb_cfg_54 always be 0 } diff --git a/src/cpu/amd/model_fxx/apic_timer.c b/src/cpu/amd/model_fxx/apic_timer.c index 5a81f912c5..8eeb32fee9 100644 --- a/src/cpu/amd/model_fxx/apic_timer.c +++ b/src/cpu/amd/model_fxx/apic_timer.c @@ -7,10 +7,13 @@ void init_timer(void) { /* Set the apic timer to no interrupts and periodic mode */ lapic_write(LAPIC_LVTT, (1 << 17)|(1<< 16)|(0 << 12)|(0 << 0)); + /* Set the divider to 1, no divider */ lapic_write(LAPIC_TDCR, LAPIC_TDR_DIV_1); + /* Set the initial counter to 0xffffffff */ lapic_write(LAPIC_TMICT, 0xffffffff); + } void udelay(unsigned usecs) diff --git a/src/cpu/amd/model_fxx/fidvid.c b/src/cpu/amd/model_fxx/fidvid.c new file mode 100644 index 0000000000..8d1b84c24f --- /dev/null +++ b/src/cpu/amd/model_fxx/fidvid.c @@ -0,0 +1,396 @@ +#if K8_SET_FIDVID == 1 + +#define K8_SET_FIDVID_DEBUG 0 + +#define K8_SET_FIDVID_STORE_AP_APICID_AT_FIRST 1 + +static inline void print_debug_fv(const char *str, unsigned val) +{ +#if K8_SET_FIDVID_DEBUG == 1 + #if CONFIG_USE_INIT==1 + printk_debug("%s%x\r\n", str, val); + #else + print_debug(str); print_debug_hex32(val); print_debug("\r\n"); + #endif +#endif +} + +static inline void print_debug_fv_8(const char *str, unsigned val) +{ +#if K8_SET_FIDVID_DEBUG == 1 + #if CONFIG_USE_INIT==1 + printk_debug("%s%02x\r\n", str, val); + #else + print_debug(str); print_debug_hex8(val); print_debug("\r\n"); + #endif +#endif +} + +static inline void print_debug_fv_64(const char *str, unsigned val, unsigned val2) +{ +#if K8_SET_FIDVID_DEBUG == 1 + #if CONFIG_USE_INIT==1 + printk_debug("%s%x%x\r\n", str, val, val2); + #else + print_debug(str); print_debug_hex32(val); print_debug_hex32(val2); print_debug("\r\n"); + #endif +#endif +} + + +static void enable_fid_change(void) +{ + uint32_t dword; + unsigned nodes; + int i; + + nodes = ((pci_read_config32(PCI_DEV(0, 0x18, 0), 0x60)>>4) & 7) + 1; + + for(i=0; i> 8) & 0x3f; + vid = (fidvid >> 16) & 0x3f; + + msr = rdmsr(0xc0010042); + + vid_cur = msr.hi & 0x3f; + fid_cur = msr.lo & 0x3f; + + if((vid_cur==vid) && (fid_cur==fid)) return fidvid; + + vid_max = (msr.hi>>(48-32)) & 0x3f; + fid_max = (msr.lo>>16) & 0x3f; + + //set vid to max + msr.hi = 1; + msr.lo = (vid_max<<8) | (fid_cur); + msr.lo |= (1<<16); // init changes + wrmsr(0xc0010041, msr); + + for(loop=0;loop<100000;loop++){ + msr = rdmsr(0xc0010042); + if(!(msr.lo & (1<<31))) break; + } + vid_cur = msr.hi & 0x3f; + + steps = 8; //?? + while((fid_cur!=fid) && (steps-->0)) { + uint32_t fid_temp; + if((fid_cur > (8-4)*2) && (fid> (8-4)*2)) { + if(fid_curfid_max) break; + + fid_cur = fid_temp; + + //set target fid + msr.hi = (100000/5); + msr.lo = (vid_cur<<8) | fid_cur; + msr.lo |= (1<<16); // init changes + wrmsr(0xc0010041, msr); + + +#if K8_SET_FIDVID_DEBUG == 1 + if(showmessage) { + print_debug_fv_8("\tapicid in set_fidvid = ", apicid); + print_debug_fv_64("ctrl msr fid, vid ", msr.hi, msr.lo); + } +#endif + + for(loop=0;loop<100000;loop++){ + msr = rdmsr(0xc0010042); + if(!(msr.lo & (1<<31))) break; + } + fid_cur = msr.lo & 0x3f; + +#if K8_SET_FIDVID_DEBUG == 1 + if(showmessage) { + print_debug_fv_64("status msr fid, vid ", msr.hi, msr.lo); + } +#endif + } + + //set vid to final + msr.hi = 1; + msr.lo = (vid<<8) | (fid_cur); + msr.lo |= (1<<16); // init changes + wrmsr(0xc0010041, msr); + + for(loop=0;loop<100000;loop++){ + msr = rdmsr(0xc0010042); + if(!(msr.lo & (1<<31))) break; + } + vid_cur = msr.hi & 0x3f; + + fidvid = (vid_cur<< 16) | (fid_cur<<8); + + if(showmessage) { + if((fid!=fid_cur) || (vid!=vid_cur)) { + print_err("set fidvid failed\r\n"); + } + } + + return fidvid; + +} + +static void init_fidvid_ap(unsigned bsp_apicid, unsigned apicid) +{ + + uint32_t send; + uint32_t readback; + msr_t msr; + uint32_t vid_cur; + uint32_t fid_cur; + int loop; + + msr = rdmsr(0xc0010042); + send = ((msr.lo>>16) & 0x3f) << 8; //max fid + send |= ((msr.hi>>(48-32)) & 0x3f) << 16; //max vid + send |= (apicid<<24); // ap apicid + + vid_cur = msr.hi & 0x3f; + fid_cur = msr.lo & 0x3f; + + // set to current + msr.hi = 1; + msr.lo = (vid_cur<<8) | (fid_cur); + wrmsr(0xc0010041, msr); + + wait_cpu_state(bsp_apicid, 1); + //send signal to BSP about this AP max fid and vid + lapic_write(LAPIC_MSG_REG, send | 1); //AP at state 1 that sent our fid and vid + +// wait_cpu_state(bsp_apicid, 2);// don't need we can use apicid directly + loop = 100000; + while(--loop>0) { + //remote read BSP signal that include vid and fid that need to set + if(lapic_remote_read(bsp_apicid, LAPIC_MSG_REG, &readback)!=0) continue; + if(((readback>>24) & 0xff) == apicid) break; // it is this cpu turn + } + + if(loop>0) { + readback = set_fidvid(apicid, readback & 0xffff00, 1); // this AP + //send signal to BSP that this AP fid/vid is set // allow to change state2 is together with apicid + send = (apicid<<24) | (readback & 0x00ffff00); // AP at state that We set the requested fid/vid + } + + lapic_write(LAPIC_MSG_REG, send | 2); + + wait_cpu_state(bsp_apicid, 3); +} + +static unsigned calc_common_fidvid(unsigned fidvid, unsigned fidvidx) +{ + /* FIXME: need to check the change path to verify if it is reachable when common fid is small than 1.6G */ + if((fidvid & 0xff00)<=(fidvidx & 0xff00)) { + return fidvid; + } + else { + return fidvidx; + } +} + +struct fidvid_st { + unsigned common_fidvid; +}; + +static void init_fidvid_bsp_stage1(unsigned ap_apicid, void *gp ) +{ + unsigned readback; + + struct fidvid_st *fvp = gp; + int loop; + + print_debug_fv("state 1: ap_apicid=", ap_apicid); + + loop = 100000; + while(--loop > 0) { + if(lapic_remote_read(ap_apicid, LAPIC_MSG_REG, &readback)!=0) continue; + if((readback & 0xff) == 1) break; //target ap is in stage 1 + } + + print_debug_fv("\treadback=", readback); + + fvp->common_fidvid = calc_common_fidvid(fvp->common_fidvid, readback & 0xffff00); + + print_debug_fv("\tcommon_fidvid=", fvp->common_fidvid); + +} +static void init_fidvid_bsp_stage2(unsigned ap_apicid, void *gp) +{ + unsigned readback; + + struct fidvid_st *fvp = gp; + int loop; + + print_debug_fv("state 2: ap_apicid=", ap_apicid); + + lapic_write(LAPIC_MSG_REG, fvp->common_fidvid | (ap_apicid<<24) | 2); // all set to state2 + + loop = 100000; + while(--loop > 0) { + if(lapic_remote_read(ap_apicid, LAPIC_MSG_REG, &readback)!=0) continue; + if((readback & 0xff) == 2) break; // target ap is stage 2, and it'd FID has beed set + } + + print_debug_fv("\treadback=", readback); +} + +#if K8_SET_FIDVID_STORE_AP_APICID_AT_FIRST == 1 +struct ap_apicid_st { + unsigned num; + unsigned apicid[16]; // 8 way dual core need 16 + /* FIXME: 32 node quad core, may need 128 */ +}; + +static void store_ap_apicid(unsigned ap_apicid, void *gp) +{ + struct ap_apicid_st *p = gp; + + p->apicid[p->num++] = ap_apicid; + +} +#endif + +static void init_fidvid_bsp(unsigned bsp_apicid) +{ + uint32_t vid_max; + uint32_t fid_max; + + struct fidvid_st fv; + +#if K8_SET_FIDVID_STORE_AP_APICID_AT_FIRST == 1 + struct ap_apicid_st ap_apicidx; + unsigned i; +#endif + + + msr_t msr; + msr = rdmsr(0xc0010042); + fid_max = ((msr.lo>>16) & 0x3f); //max fid + vid_max = ((msr.hi>>(48-32)) & 0x3f); //max vid + fv.common_fidvid = (fid_max<<8)|(vid_max<<16); + + + // for all APs (We know the APIC ID of all APs even the APIC ID is lifted) + // remote read from AP about max fid/vid + + //let all ap trains to state 1 + lapic_write(LAPIC_MSG_REG, (bsp_apicid<<24) | 1); + + // calculate the common max fid/vid that could be used for all APs and BSP +#if K8_SET_FIDVID_STORE_AP_APICID_AT_FIRST == 1 + ap_apicidx.num = 0; + + for_each_ap(bsp_apicid, K8_SET_FIDVID_CORE0_ONLY, store_ap_apicid, &ap_apicidx); + + for(i=0;isblnk = get_sblnk(); + sysinfo->sbbusn = node_link_to_bus(0, sysinfo->sblnk); + #endif print_apicid_nodeid_coreid(apicid, id, "\r\n\r\n\r\nINIT detect from "); print_debug("\r\nIssuing SOFT_RESET...\r\n"); + #if RAMINIT_SYSINFO == 1 + soft_reset(sysinfo); + #else soft_reset(); + #endif } @@ -219,6 +245,13 @@ static unsigned init_cpus(unsigned cpu_init_detectedx) lapic_write(LAPIC_MSG_REG, (apicid<<24) | 0x33); // mark the cpu is started if(apicid != bsp_apicid) { + #if K8_SET_FIDVID == 1 + #if (CONFIG_LOGICAL_CPUS == 1) && (K8_SET_FIDVID_CORE0_ONLY == 1) + if(id.coreid == 0 ) // only need set fid for core0 + #endif + init_fidvid_ap(bsp_apicid, apicid); + #endif + // We need to stop the CACHE as RAM for this CPU, really? wait_cpu_state(bsp_apicid, 0x44); lapic_write(LAPIC_MSG_REG, (apicid<<24) | 0x44); // bsp can not check it before stop_this_cpu diff --git a/src/cpu/x86/16bit/reset16.lds b/src/cpu/x86/16bit/reset16.lds index f32597c00c..0ba54c9487 100644 --- a/src/cpu/x86/16bit/reset16.lds +++ b/src/cpu/x86/16bit/reset16.lds @@ -5,7 +5,8 @@ SECTIONS { /* Trigger an error if I have an unuseable start address */ - _ROMTOP = (_start >= 0xffff0000) ? 0xfffffff0 : 0xfffffff8; + _bogus = ASSERT(_start >= 0xffff0000, "_start to low please decrease ROM_IMAGE_SIZE"); + _ROMTOP = 0xfffffff0; . = _ROMTOP; .reset . : { *(.reset) diff --git a/src/cpu/x86/32bit/entry32.lds b/src/cpu/x86/32bit/entry32.lds index 37a75ba6ae..e69de29bb2 100644 --- a/src/cpu/x86/32bit/entry32.lds +++ b/src/cpu/x86/32bit/entry32.lds @@ -1,14 +0,0 @@ -/* - _cache_ram_seg_base = DEFINED(CACHE_RAM_BASE)? CACHE_RAM_BASE - _rodata : 0; - _cache_ram_seg_base_low = (_cache_ram_seg_base) & 0xffff; - _cache_ram_seg_base_middle = (_cache_ram_seg_base >> 16) & 0xff; - _cache_ram_seg_base_high = (_cache_ram_seg_base >> 24) & 0xff; - - _rom_code_seg_base = _ltext - _text; - _rom_code_seg_base_low = (_rom_code_seg_base) & 0xffff; - _rom_code_seg_base_middle = (_rom_code_seg_base >> 16) & 0xff; - _rom_code_seg_base_high = (_rom_code_seg_base >> 24) & 0xff; -*/ - - - diff --git a/src/cpu/x86/lapic/lapic_cpu_init.c b/src/cpu/x86/lapic/lapic_cpu_init.c index 7f348790e5..4e7e696c47 100644 --- a/src/cpu/x86/lapic/lapic_cpu_init.c +++ b/src/cpu/x86/lapic/lapic_cpu_init.c @@ -227,24 +227,19 @@ int start_cpu(device_t cpu) } /* C entry point of secondary cpus */ - -// secondary_cpu_lock is used to serialize initialization of secondary CPUs -// This can be used to avoid interleaved debugging messages. - -static spinlock_t secondary_cpu_lock = SPIN_LOCK_UNLOCKED; - void secondary_cpu_init(void) { atomic_inc(&active_cpus); - #if SERIAL_CPU_INIT == 1 - spin_lock(&secondary_cpu_lock); + #if CONFIG_MAX_CPUS>2 + spin_lock(&start_cpu_lock); + #endif #endif - cpu_initialize(); - #if SERIAL_CPU_INIT == 1 - spin_unlock(&secondary_cpu_lock); + #if CONFIG_MAX_CPUS>2 + spin_unlock(&start_cpu_lock); + #endif #endif atomic_dec(&active_cpus); @@ -260,12 +255,15 @@ static void initialize_other_cpus(struct bus *cpu_bus) if (cpu->path.type != DEVICE_PATH_APIC) { continue; } + if (!cpu->enabled) { continue; } + if (cpu->initialized) { continue; } + if (!start_cpu(cpu)) { /* Record the error in cpu? */ printk_err("CPU %u would not start!\n", diff --git a/src/devices/device.c b/src/devices/device.c index 303a669d9f..4ca469b191 100644 --- a/src/devices/device.c +++ b/src/devices/device.c @@ -369,7 +369,6 @@ void compute_allocate_resource( } #if CONFIG_CONSOLE_VGA == 1 - device_t vga_pri = 0; static void allocate_vga_resource(void) { @@ -377,31 +376,52 @@ static void allocate_vga_resource(void) #warning "This function knows to much about PCI stuff, it should be just a ietrator/visitor." /* FIXME handle the VGA pallette snooping */ - struct device *dev, *vga, *vga_onboard; + struct device *dev, *vga, *vga_onboard, *vga_first, *vga_last; struct bus *bus; bus = 0; vga = 0; vga_onboard = 0; + vga_first = 0; + vga_last = 0; for(dev = all_devices; dev; dev = dev->next) { if (!dev->enabled) continue; if (((dev->class >> 16) == PCI_BASE_CLASS_DISPLAY) && ((dev->class >> 8) != PCI_CLASS_DISPLAY_OTHER)) { - if (!vga) { - if (dev->on_mainboard) { - vga_onboard = dev; - } else { - vga = dev; - } - } + if (!vga_first) { + if (dev->on_mainboard) { + vga_onboard = dev; + } else { + vga_first = dev; + } + } else { + if (dev->on_mainboard) { + vga_onboard = dev; + } else { + vga_last = dev; + } + } + /* It isn't safe to enable other VGA cards */ dev->command &= ~(PCI_COMMAND_MEMORY | PCI_COMMAND_IO); } } - if (!vga) { - vga = vga_onboard; - } + vga = vga_last; + + if(!vga) { + vga = vga_first; + } + +#if 1 + if (vga_onboard) // will use on board vga as pri +#else + if (!vga) // will use last add on adapter as pri +#endif + { + vga = vga_onboard; + } + if (vga) { /* vga is first add on card or the only onboard vga */ @@ -419,6 +439,7 @@ static void allocate_vga_resource(void) bus = (bus == bus->dev->bus)? 0 : bus->dev->bus; } } + #endif @@ -499,7 +520,6 @@ void enable_resources(struct device *dev) */ int reset_bus(struct bus *bus) { - device_t dev; if (bus && bus->dev && bus->dev->ops && bus->dev->ops->reset_bus) { bus->dev->ops->reset_bus(bus); diff --git a/src/devices/hypertransport.c b/src/devices/hypertransport.c index a30c8f6a8d..fd347083df 100644 --- a/src/devices/hypertransport.c +++ b/src/devices/hypertransport.c @@ -1,3 +1,9 @@ +/* + 2005.11 yhlu add let the real sb to use small uintid + +*/ + + #include #include #include @@ -11,7 +17,7 @@ #define OPT_HT_LINK 0 #if OPT_HT_LINK == 1 -#include "../northbridge/amd/amdk8/cpu_rev.c" +#include #endif static device_t ht_scan_get_devs(device_t *old_devices) @@ -71,12 +77,13 @@ static unsigned ht_read_freq_cap(device_t dev, unsigned pos) } /* AMD K8 Unsupported 1Ghz? */ if ((dev->vendor == PCI_VENDOR_ID_AMD) && (dev->device == 0x1100)) { -#if K8_HT_FREQ_1G_SUPPORT == 1 - if (is_cpu_pre_e0()) -#endif - { +#if K8_HT_FREQ_1G_SUPPORT == 1 + if (is_cpu_pre_e0()) { // only e0 later suupport 1GHz HT freq_cap &= ~(1 << HT_FREQ_1000Mhz); - } + } +#else + freq_cap &= ~(1 << HT_FREQ_1000Mhz); +#endif } return freq_cap; @@ -248,7 +255,7 @@ static unsigned ht_lookup_slave_capability(struct device *dev) return pos; } -static void ht_collapse_early_enumeration(struct bus *bus) +static void ht_collapse_early_enumeration(struct bus *bus, unsigned offset_unitid) { unsigned int devfn; struct ht_link prev; @@ -275,6 +282,26 @@ static void ht_collapse_early_enumeration(struct bus *bus) } } while((ctrl & (1 << 5)) == 0); + //actually, only for one HT device HT chain, and unitid is 0 +#if HT_CHAIN_UNITID_BASE == 0 + if(offset_unitid) { + return; + } +#endif + + /* Check if is already collapsed */ + if((!offset_unitid)|| (offset_unitid && (!((HT_CHAIN_END_UNITID_BASE == 0) && (HT_CHAIN_END_UNITID_BASE children; @@ -405,6 +442,7 @@ unsigned int hypertransport_scan_chain(struct bus *bus, func->path.u.pci.devfn += (next_unitid << 3); static_count = (func->path.u.pci.devfn >> 3) - (dev->path.u.pci.devfn >> 3) + 1; + last_func = func; } /* Compute the number of unitids consumed */ @@ -416,6 +454,14 @@ unsigned int hypertransport_scan_chain(struct bus *bus, } /* Update the Unitid of the next device */ +#if HT_CHAIN_END_UNITID_BASE < HT_CHAIN_UNITID_BASE + if(offset_unitid) { + real_last_unitid = next_unitid; + real_last_pos = pos; + real_last_dev = dev; + ht_dev_num++; + } +#endif next_unitid += count; /* Setup the hypetransport link */ @@ -442,6 +488,26 @@ unsigned int hypertransport_scan_chain(struct bus *bus, printk_debug("HyperT reset not needed\n"); } #endif + +#if HT_CHAIN_END_UNITID_BASE < HT_CHAIN_UNITID_BASE + if(offset_unitid && (ht_dev_num>0)) { + uint16_t flags; + int i; + device_t last_func = 0; + flags = pci_read_config16(real_last_dev, real_last_pos + PCI_CAP_FLAGS); + flags &= ~0x1f; + flags |= HT_CHAIN_END_UNITID_BASE & 0x1f; + pci_write_config16(real_last_dev, real_last_pos + PCI_CAP_FLAGS, flags); + + for(func = real_last_dev; func; func = func->sibling) { + func->path.u.pci.devfn -= ((real_last_unitid - HT_CHAIN_END_UNITID_BASE) << 3); + last_func = func; + } + + next_unitid = real_last_unitid; + } +#endif + if (next_unitid > 0x1f) { next_unitid = 0x1f; } @@ -454,13 +520,15 @@ unsigned int hypertransport_scan_chain(struct bus *bus, for(left = old_devices; left; left = left->sibling) { printk_debug("%s\n", dev_path(left)); } - die("Left over static devices. Check your Config.lb\n"); + printk_err("HT: Left over static devices. Check your Config.lb\n"); + if(last_func && !last_func->sibling) // put back the left over static device, and let pci_scan_bus disable it + last_func->sibling = old_devices; } - + /* Now that nothing is overlapping it is safe to scan the * children. */ - max = pci_scan_bus(bus, 0x00, (next_unitid << 3)|7, max); + max = pci_scan_bus(bus, 0x00, (next_unitid << 3)|7, max); return max; } diff --git a/src/devices/pci_device.c b/src/devices/pci_device.c index f3f53f0688..a002d1cc35 100644 --- a/src/devices/pci_device.c +++ b/src/devices/pci_device.c @@ -1043,7 +1043,7 @@ unsigned int pci_scan_bus(struct bus *bus, for(left = old_devices; left; left = left->sibling) { printk_debug("%s\n", dev_path(left)); } - die("Left over static devices. Check your Config.lb\n"); + die("PCI: Left over static devices. Check your Config.lb\n"); } /* For all children that implement scan_bus (i.e. bridges) diff --git a/src/devices/pci_rom.c b/src/devices/pci_rom.c index 64a85bb700..fbc6130bc3 100644 --- a/src/devices/pci_rom.c +++ b/src/devices/pci_rom.c @@ -22,14 +22,15 @@ struct rom_header * pci_rom_probe(struct device *dev) } printk_debug("rom address for %s = %x\n", dev_path(dev), rom_address); + + if(!dev->on_mainboard) { + /* enable expansion ROM address decoding */ + pci_write_config32(dev, PCI_ROM_ADDRESS, + rom_address|PCI_ROM_ADDRESS_ENABLE); + } - /* enable expansion ROM address decoding */ - pci_write_config32(dev, PCI_ROM_ADDRESS, - rom_address|PCI_ROM_ADDRESS_ENABLE); - - rom_header = (struct rom_header *) rom_address; - printk_spew("PCI Expansion ROM, signature 0x%04x, \n\t" - "INIT size 0x%04x, data ptr 0x%04x\n", + rom_header = (struct rom_header *)rom_address; + printk_spew("PCI Expansion ROM, signature 0x%04x, INIT size 0x%04x, data ptr 0x%04x\n", le32_to_cpu(rom_header->signature), rom_header->size * 512, le32_to_cpu(rom_header->data)); if (le32_to_cpu(rom_header->signature) != PCI_ROM_HDR) { @@ -38,7 +39,7 @@ struct rom_header * pci_rom_probe(struct device *dev) return NULL; } - rom_data = (struct pci_data *) ((unsigned char *) rom_header + le32_to_cpu(rom_header->data)); + rom_data = (unsigned char *) rom_header + le32_to_cpu(rom_header->data); printk_spew("PCI ROM Image, Vendor %04x, Device %04x,\n", rom_data->vendor, rom_data->device); if (dev->vendor != rom_data->vendor || dev->device != rom_data->device) { @@ -51,7 +52,7 @@ struct rom_header * pci_rom_probe(struct device *dev) rom_data->class_hi, rom_data->class_lo, rom_data->type); if (dev->class != ((rom_data->class_hi << 8) | rom_data->class_lo)) { - printk_err("Class Code mismatch ROM %08x, dev %08x\n", + printk_debug("Class Code mismatch ROM %08x, dev %08x\n", (rom_data->class_hi << 8) | rom_data->class_lo, dev->class); //return NULL; } @@ -59,12 +60,14 @@ struct rom_header * pci_rom_probe(struct device *dev) return rom_header; } -static void *pci_ram_image_start = PCI_RAM_IMAGE_START; +static void *pci_ram_image_start = (void *)PCI_RAM_IMAGE_START; #if CONFIG_CONSOLE_VGA == 1 -int vga_inited = 0; // used by vga_console.c +extern int vga_inited; // defined in vga_console.c +#if CONFIG_CONSOLE_VGA_MULTI == 0 extern device_t vga_pri; // the primary vga device, defined in device.c #endif +#endif struct rom_header *pci_rom_load(struct device *dev, struct rom_header *rom_header) { @@ -76,8 +79,8 @@ struct rom_header *pci_rom_load(struct device *dev, struct rom_header *rom_heade rom_address = pci_read_config32(dev, PCI_ROM_ADDRESS); do { - rom_header = (struct rom_header *) ((unsigned char *) rom_header + image_size); // get next image - rom_data = (struct pci_data *) ((unsigned char *) rom_header + le32_to_cpu(rom_header->data)); + rom_header = (unsigned char *) rom_header + image_size; // get next image + rom_data = (unsigned char *) rom_header + le32_to_cpu(rom_header->data); image_size = le32_to_cpu(rom_data->ilen) * 512; } while ((rom_data->type!=0) && (rom_data->indicator!=0)); // make sure we got x86 version @@ -87,7 +90,9 @@ struct rom_header *pci_rom_load(struct device *dev, struct rom_header *rom_heade if (PCI_CLASS_DISPLAY_VGA == rom_data->class_hi) { #if CONFIG_CONSOLE_VGA == 1 + #if CONFIG_CONSOLE_VGA_MULTI == 0 if (dev != vga_pri) return NULL; // only one VGA supported + #endif printk_debug("copying VGA ROM Image from %x to %x, %x bytes\n", rom_header, PCI_VGA_RAM_IMAGE_START, rom_size); memcpy(PCI_VGA_RAM_IMAGE_START, rom_header, rom_size); @@ -95,11 +100,11 @@ struct rom_header *pci_rom_load(struct device *dev, struct rom_header *rom_heade return (struct rom_header *) (PCI_VGA_RAM_IMAGE_START); #endif } else { - printk_spew("%s, copying non-VGA ROM Image from %x to %x, %x bytes\n", - __func__, rom_header, pci_ram_image_start, rom_size); + printk_debug("copying non-VGA ROM Image from %x to %x, %x bytes\n", + rom_header, pci_ram_image_start, rom_size); memcpy(pci_ram_image_start, rom_header, rom_size); pci_ram_image_start += rom_size; - return (struct rom_header *) pci_ram_image_start; + return (struct rom_header *) (pci_ram_image_start-rom_size); } /* disable expansion ROM address decoding */ pci_write_config32(dev, PCI_ROM_ADDRESS, rom_address & ~PCI_ROM_ADDRESS_ENABLE); diff --git a/src/include/cpu/amd/dualcore.h b/src/include/cpu/amd/dualcore.h index a38565b01f..fb53c92909 100644 --- a/src/include/cpu/amd/dualcore.h +++ b/src/include/cpu/amd/dualcore.h @@ -1,14 +1,24 @@ #ifndef CPU_AMD_DUALCORE_H #define CPU_AMD_DUALCORE_H -struct device; +#if defined(__GNUC__) +unsigned int read_nb_cfg_54(void); +#endif struct node_core_id { unsigned nodeid; unsigned coreid; }; -void amd_sibling_init(struct device *cpu, struct node_core_id id); -struct node_core_id get_node_core_id(void); +#if defined(__GNUC__) +// it can be used to get unitid and coreid it running only +struct node_core_id get_node_core_id(unsigned int nb_cfg_54); +#endif + +#ifndef __ROMCC__ +struct device; +unsigned get_apicid_base(unsigned ioapic_num); +void amd_sibling_init(struct device *cpu); +#endif #endif /* CPU_AMD_DUALCORE_H */ diff --git a/src/include/cpu/x86/lapic.h b/src/include/cpu/x86/lapic.h index 12ca518f66..5d696dce18 100644 --- a/src/include/cpu/x86/lapic.h +++ b/src/include/cpu/x86/lapic.h @@ -10,17 +10,17 @@ # define NEED_LAPIC 1 #endif -static inline unsigned long lapic_read(unsigned long reg) +static inline __attribute__((always_inline)) unsigned long lapic_read(unsigned long reg) { return *((volatile unsigned long *)(LAPIC_DEFAULT_BASE+reg)); } -static inline void lapic_write(unsigned long reg, unsigned long v) +static inline __attribute__((always_inline)) void lapic_write(unsigned long reg, unsigned long v) { *((volatile unsigned long *)(LAPIC_DEFAULT_BASE+reg)) = v; } -static inline void lapic_wait_icr_idle(void) +static inline __attribute__((always_inline)) void lapic_wait_icr_idle(void) { do { } while ( lapic_read( LAPIC_ICR ) & LAPIC_ICR_BUSY ); } @@ -46,13 +46,14 @@ static inline void disable_lapic(void) wrmsr(LAPIC_BASE_MSR, msr); } -static inline unsigned long lapicid(void) +static inline __attribute__((always_inline)) unsigned long lapicid(void) { return lapic_read(LAPIC_ID) >> 24; } -static inline void stop_this_cpu(void) +static inline __attribute__((always_inline)) void stop_this_cpu(void) { + unsigned apicid; apicid = lapicid(); diff --git a/src/include/device/hypertransport.h b/src/include/device/hypertransport.h index f04d0eca30..8eba981745 100644 --- a/src/include/device/hypertransport.h +++ b/src/include/device/hypertransport.h @@ -4,7 +4,7 @@ #include unsigned int hypertransport_scan_chain(struct bus *bus, - unsigned min_devfn, unsigned max_devfn, unsigned int max); + unsigned min_devfn, unsigned max_devfn, unsigned int max, unsigned offset_unitid); unsigned int ht_scan_bridge(struct device *dev, unsigned int max); extern struct device_operations default_ht_ops_bus; diff --git a/src/include/device/pci_ids.h b/src/include/device/pci_ids.h index 373b73c2ee..d219b96fe1 100644 --- a/src/include/device/pci_ids.h +++ b/src/include/device/pci_ids.h @@ -438,6 +438,9 @@ #define PCI_DEVICE_ID_AMD_8131_PCIX 0x7450 #define PCI_DEVICE_ID_AMD_8131_IOAPIC 0x7451 +#define PCI_DEVICE_ID_AMD_8132_PCIX 0x7458 +#define PCI_DEVICE_ID_AMD_8132_IOAPIC 0x7459 + #define PCI_VENDOR_ID_TRIDENT 0x1023 #define PCI_DEVICE_ID_TRIDENT_4DWAVE_DX 0x2000 #define PCI_DEVICE_ID_TRIDENT_4DWAVE_NX 0x2001 @@ -910,6 +913,20 @@ #define PCI_DEVICE_ID_CERN_HIPPI_DST 0x0021 #define PCI_DEVICE_ID_CERN_HIPPI_SRC 0x0022 +#define PCI_DEVICE_ID_NVIDIA_CK8S_HT 0x00e1 +#define PCI_DEVICE_ID_NVIDIA_CK8S_LPC 0x00e0 +#define PCI_DEVICE_ID_NVIDIA_CK8S_SM 0x00e4 +#define PCI_DEVICE_ID_NVIDIA_CK8S_USB 0x00e7 +#define PCI_DEVICE_ID_NVIDIA_CK8S_USB2 0x00e8 +#define PCI_DEVICE_ID_NVIDIA_CK8S_NIC 0x00e6 +#define PCI_DEVICE_ID_NVIDIA_CK8S_ACI 0x00ea +#define PCI_DEVICE_ID_NVIDIA_CK8S_MCI 0x00e9 +#define PCI_DEVICE_ID_NVIDIA_CK8S_IDE 0x00e5 +#define PCI_DEVICE_ID_NVIDIA_CK8S_SATA0 0x00ee +#define PCI_DEVICE_ID_NVIDIA_CK8S_SATA1 0x00e3 +#define PCI_DEVICE_ID_NVIDIA_CK8S_PCI 0x00ed +#define PCI_DEVICE_ID_NVIDIA_CK8S_PCI_AGP 0x00e2 + #define PCI_VENDOR_ID_NVIDIA 0x10de #define PCI_DEVICE_ID_NVIDIA_TNT 0x0020 #define PCI_DEVICE_ID_NVIDIA_TNT2 0x0028 @@ -1060,8 +1077,8 @@ #define PCI_DEVICE_ID_VIA_8233C_0 0x3109 #define PCI_DEVICE_ID_VIA_8361 0x3112 #define PCI_DEVICE_ID_VIA_8233A 0x3147 -#define PCI_DEVICE_ID_VIA_CLE266_VGA 0x3122 -#define PCI_DEVICE_ID_VIA_8623 0x3123 +#define PCI_DEVICE_ID_VIA_CLE266_VGA 0x3122 +#define PCI_DEVICE_ID_VIA_8623 0x3123 #define PCI_DEVICE_ID_VIA_86C100A 0x6100 #define PCI_DEVICE_ID_VIA_8231 0x8231 #define PCI_DEVICE_ID_VIA_8231_4 0x8235 @@ -1207,6 +1224,21 @@ #define PCI_DEVICE_ID_SERVERWORKS_GCLE2 0x0227 #define PCI_DEVICE_ID_SERVERWORKS_CSB5ISA 0x0230 +#define PCI_DEVICE_ID_SERVERWORKS_BCM5780_PXB 0x0130 +#define PCI_DEVICE_ID_SERVERWORKS_BCM5780_PCIE 0x0132 +#define PCI_DEVICE_ID_BROADCOM_BCM5780_NIC 0x1668 +#define PCI_DEVICE_ID_BROADCOM_BCM5780_NIC1 0x1669 + +#define PCI_DEVICE_ID_SERVERWORKS_BCM5785_HT_PXB 0x0036 +#define PCI_DEVICE_ID_SERVERWORKS_BCM5785_PXBX 0x0104 +#define PCI_DEVICE_ID_SERVERWORKS_BCM5785_SATA 0x024a +#define PCI_DEVICE_ID_SERVERWORKS_BCM5785_SB_PCI_MAIN 0x0205 +#define PCI_DEVICE_ID_SERVERWORKS_BCM5785_IDE 0x0214 +#define PCI_DEVICE_ID_SERVERWORKS_BCM5785_LPC 0x0234 +#define PCI_DEVICE_ID_SERVERWORKS_BCM5785_WDT 0x0238 +#define PCI_DEVICE_ID_SERVERWORKS_BCM5785_XIOAPIC 0x0235 +#define PCI_DEVICE_ID_SERVERWORKS_BCM5785_USB 0x0223 + #define PCI_VENDOR_ID_SBE 0x1176 #define PCI_DEVICE_ID_SBE_WANXL100 0x0301 #define PCI_DEVICE_ID_SBE_WANXL200 0x0302 @@ -1763,7 +1795,6 @@ #define PCI_DEVICE_ID_INTEL_82801CA_1F3 0x2483 #define PCI_DEVICE_ID_INTEL_82801CA_1D1 0x2484 #define PCI_DEVICE_ID_INTEL_82801CA_1F5 0x2485 -#define PCI_DEVICE_ID_INTEL_82801CA_1F6 0x2486 #define PCI_DEVICE_ID_INTEL_82801CA_1D2 0x2487 #define PCI_DEVICE_ID_INTEL_82870_1E0 0x1461 #define PCI_DEVICE_ID_INTEL_82870_1F0 0x1460 @@ -1793,17 +1824,15 @@ #define PCI_DEVICE_ID_INTEL_82801E_11 0x245b #define PCI_DEVICE_ID_INTEL_82801E_13 0x245d #define PCI_DEVICE_ID_INTEL_82801E_14 0x245e -#define PCI_DEVICE_ID_INTEL_82801CA_LAN 0x2449 -#define PCI_DEVICE_ID_INTEL_82801CA_PCI 0x244e // Same as 82801ER -#define PCI_DEVICE_ID_INTEL_82801CA_LPC 0x2480 -#define PCI_DEVICE_ID_INTEL_82801CA_USB 0x2482 -#define PCI_DEVICE_ID_INTEL_82801CA_SMB 0x2483 -#define PCI_DEVICE_ID_INTEL_82801CA_USB2 0x2484 -#define PCI_DEVICE_ID_INTEL_82801CA_AC97_AUDIO 0x2485 -#define PCI_DEVICE_ID_INTEL_82801CA_AC97_MODEM 0x2486 -#define PCI_DEVICE_ID_INTEL_82801CA_USB3 0x2487 +#define PCI_DEVICE_ID_INTEL_82801CA_0 0x2480 +#define PCI_DEVICE_ID_INTEL_82801CA_2 0x2482 +#define PCI_DEVICE_ID_INTEL_82801CA_3 0x2483 +#define PCI_DEVICE_ID_INTEL_82801CA_4 0x2484 +#define PCI_DEVICE_ID_INTEL_82801CA_5 0x2485 +#define PCI_DEVICE_ID_INTEL_82801CA_6 0x2486 +#define PCI_DEVICE_ID_INTEL_82801CA_7 0x2487 #define PCI_DEVICE_ID_INTEL_82801CA_10 0x248a -#define PCI_DEVICE_ID_INTEL_82801CA_IDE 0x248b +#define PCI_DEVICE_ID_INTEL_82801CA_11 0x248b #define PCI_DEVICE_ID_INTEL_82801CA_12 0x248c #define PCI_DEVICE_ID_INTEL_82801DB_0 0x24c0 #define PCI_DEVICE_ID_INTEL_82801DB_2 0x24c2 diff --git a/src/northbridge/amd/amdk8/amdk8.h b/src/northbridge/amd/amdk8/amdk8.h index 89c03fc16b..7e064af974 100644 --- a/src/northbridge/amd/amdk8/amdk8.h +++ b/src/northbridge/amd/amdk8/amdk8.h @@ -1,3 +1,7 @@ +#ifndef AMDK8_H + +#define AMDK8_H + /* Definitions of various K8 registers */ /* Function 0 */ #define HT_TRANSACTION_CONTROL 0x68 @@ -226,3 +230,5 @@ #define InitComplete (1 << 1) #define NonCoherent (1 << 2) #define ConnectionPending (1 << 4) + +#endif diff --git a/src/northbridge/amd/amdk8/coherent_ht.c b/src/northbridge/amd/amdk8/coherent_ht.c index 36d2dcded5..7d43f3c97d 100644 --- a/src/northbridge/amd/amdk8/coherent_ht.c +++ b/src/northbridge/amd/amdk8/coherent_ht.c @@ -1812,9 +1812,9 @@ static int setup_coherent_ht_domain(void) #if CONFIG_MAX_PHYSICAL_CPUS > 1 result = setup_smp(); -#endif result.nodes = verify_mp_capabilities(result.nodes); clear_dead_routes(result.nodes); +#endif if (result.nodes == 1) { setup_uniprocessor(); } diff --git a/src/northbridge/amd/amdk8/debug.c b/src/northbridge/amd/amdk8/debug.c index d0841e878e..ca45cbe519 100644 --- a/src/northbridge/amd/amdk8/debug.c +++ b/src/northbridge/amd/amdk8/debug.c @@ -2,6 +2,18 @@ * generic K8 debug code, used by mainboard specific auto.c * */ + +static inline void print_debug_addr(const char *str, void *val) +{ +#if CACHE_AS_RAM_ADDRESS_DEBUG == 1 + #if CONFIG_USE_INIT==1 + printk_debug("------Address debug: %s%x------\r\n", str, val); + #else + print_debug ("------Address debug: "); print_debug(str); print_debug_hex32(val); print_debug("------\r\n"); + #endif +#endif +} + #if 1 static void print_debug_pci_dev(unsigned dev) { @@ -34,6 +46,7 @@ static void print_pci_devices(void) #if CONFIG_USE_INIT printk_debug(" %04x:%04x\r\n", (id & 0xffff), (id>>16)); #else + print_debug(" "); print_debug_hex32(id); print_debug("\r\n"); #endif diff --git a/src/northbridge/amd/amdk8/early_ht.c b/src/northbridge/amd/amdk8/early_ht.c index 2711657455..5134494943 100644 --- a/src/northbridge/amd/amdk8/early_ht.c +++ b/src/northbridge/amd/amdk8/early_ht.c @@ -1,14 +1,26 @@ -static int enumerate_ht_chain(void) +/* + 2005.11 yhlu add let the real sb to use small unitid +*/ +// only for sb ht chain +static void enumerate_ht_chain(void) { +#if HT_CHAIN_UNITID_BASE != 0 +/* HT_CHAIN_UNITID_BASE could be 0 (only one ht device in the ht chain), if so, don't need to go through the chain */ + /* Assumption the HT chain that is bus 0 has the HT I/O Hub on it. * On most boards this just happens. If a cpu has multiple * non Coherent links the appropriate bus registers for the * links needs to be programed to point at bus 0. */ unsigned next_unitid, last_unitid; - int reset_needed = 0; +#if HT_CHAIN_END_UNITID_BASE < HT_CHAIN_UNITID_BASE + //let't record the device of last ht device, So we can set the Unitid to HT_CHAIN_END_UNITID_BASE + unsigned real_last_unitid; + uint8_t real_last_pos; + int ht_dev_num = 0; // except host_bridge +#endif - next_unitid = 1; + next_unitid = HT_CHAIN_UNITID_BASE; do { uint32_t id; uint8_t hdr_type, pos; @@ -58,6 +70,11 @@ static int enumerate_ht_chain(void) flags &= ~0x1f; flags |= next_unitid & 0x1f; count = (flags >> 5) & 0x1f; +#if HT_CHAIN_END_UNITID_BASE < HT_CHAIN_UNITID_BASE + real_last_unitid = next_unitid; + real_last_pos = pos; + ht_dev_num++ ; +#endif next_unitid += count; /* Test for end of chain */ @@ -78,7 +95,17 @@ static int enumerate_ht_chain(void) pos = pci_read_config8(PCI_DEV(0, 0, 0), pos + PCI_CAP_LIST_NEXT); } } while((last_unitid != next_unitid) && (next_unitid <= 0x1f)); +#if HT_CHAIN_END_UNITID_BASE < HT_CHAIN_UNITID_BASE + if(ht_dev_num>0) { + uint16_t flags; + flags = pci_read_config16(PCI_DEV(0,real_last_unitid,0), real_last_pos + PCI_CAP_FLAGS); + flags &= ~0x1f; + flags |= HT_CHAIN_END_UNITID_BASE & 0x1f; + pci_write_config16(PCI_DEV(0, real_last_unitid, 0), real_last_pos + PCI_CAP_FLAGS, flags); + } +#endif + +#endif - return reset_needed; } diff --git a/src/northbridge/amd/amdk8/incoherent_ht.c b/src/northbridge/amd/amdk8/incoherent_ht.c index bdb2676e39..02a0c2dccd 100644 --- a/src/northbridge/amd/amdk8/incoherent_ht.c +++ b/src/northbridge/amd/amdk8/incoherent_ht.c @@ -1,17 +1,12 @@ /* This should be done by Eric 2004.12 yhlu add multi ht chain dynamically support - + 2005.11 yhlu add let real sb to use small unitid */ #include #include #include - -/* We can reduce the size of code generated by romcc by - * changing all of the fixed size types that live in registers - * into simple unsigned variables. (ie s/uint8_t/unsigned/g) - */ #ifndef K8_HT_FREQ_1G_SUPPORT #define K8_HT_FREQ_1G_SUPPORT 0 #endif @@ -20,15 +15,22 @@ #define K8_SCAN_PCI_BUS 0 #endif +#ifndef K8_ALLOCATE_IO_RANGE + #define K8_ALLOCATE_IO_RANGE 0 +#endif + +// Do we need allocate MMIO? Current We direct last 64M to sblink only, We can not lose access to last 4M range to ROM +#ifndef K8_ALLOCATE_MMIO_RANGE + #define K8_ALLOCATE_MMIO_RANGE 0 +#endif + static inline void print_linkn_in (const char *strval, uint8_t byteval) { -#if 1 #if CONFIG_USE_INIT printk_debug("%s%02x\r\n", strval, byteval); #else print_debug(strval); print_debug_hex8(byteval); print_debug("\r\n"); #endif -#endif } static uint8_t ht_lookup_capability(device_t dev, uint16_t val) @@ -74,18 +76,27 @@ static uint8_t ht_lookup_host_capability(device_t dev) return ht_lookup_capability(dev, 1); // Host/Secondary Interface Block Format } -static void ht_collapse_previous_enumeration(uint8_t bus) +static void ht_collapse_previous_enumeration(uint8_t bus, unsigned offset_unitid) { device_t dev; uint32_t id; + //actually, only for one HT device HT chain, and unitid is 0 +#if HT_CHAIN_UNITID_BASE == 0 + if(offset_unitid) { + return; + } +#endif + /* Check if is already collapsed */ - dev = PCI_DEV(bus, 0, 0); - id = pci_read_config32(dev, PCI_VENDOR_ID); - if ( ! ( (id == 0xffffffff) || (id == 0x00000000) || - (id == 0x0000ffff) || (id == 0xffff0000) ) ) { - return; - } + if((!offset_unitid) || (offset_unitid && (!((HT_CHAIN_END_UNITID_BASE == 0) && (HT_CHAIN_END_UNITID_BASE > 5) & 0x1f; +#if HT_CHAIN_END_UNITID_BASE < HT_CHAIN_UNITID_BASE + if(offset_unitid) { + real_last_unitid = next_unitid; + real_last_pos = pos; + ht_dev_num++; + } +#endif + next_unitid += count; /* Find which side of the ht link we are on, @@ -449,9 +518,22 @@ static int ht_setup_chainx(device_t udev, uint8_t upos, uint8_t bus) */ flags = pci_read_config16(dev, pos + PCI_CAP_FLAGS); offs = ((flags>>10) & 1) ? PCI_HT_SLAVE1_OFFS : PCI_HT_SLAVE0_OFFS; - - /* Setup the Hypertransport link */ - reset_needed |= ht_optimize_link(udev, upos, uoffs, dev, pos, offs); + + #if RAMINIT_SYSINFO == 1 + /* store the link pair here and we will Setup the Hypertransport link later, after we get final FID/VID */ + { + struct link_pair_st *link_pair = &sysinfo->link_pair[sysinfo->link_pair_num]; + link_pair->udev = udev; + link_pair->upos = upos; + link_pair->uoffs = uoffs; + link_pair->dev = dev; + link_pair->pos = pos; + link_pair->offs = offs; + sysinfo->link_pair_num++; + } + #else + reset_needed |= ht_optimize_link(udev, upos, uoffs, dev, pos, offs); + #endif #if CK804_DEVN_BASE==0 if(id == 0x005e10de) { @@ -466,11 +548,52 @@ static int ht_setup_chainx(device_t udev, uint8_t upos, uint8_t bus) } while((last_unitid != next_unitid) && (next_unitid <= 0x1f)); +end_of_chain: ; + +#if HT_CHAIN_END_UNITID_BASE < HT_CHAIN_UNITID_BASE + if(offset_unitid && (ht_dev_num>0) ) { + uint16_t flags; + int i; + flags = pci_read_config16(PCI_DEV(bus,real_last_unitid,0), real_last_pos + PCI_CAP_FLAGS); + flags &= ~0x1f; + flags |= HT_CHAIN_END_UNITID_BASE & 0x1f; + pci_write_config16(PCI_DEV(bus, real_last_unitid, 0), real_last_pos + PCI_CAP_FLAGS, flags); + + #if RAMINIT_SYSINFO == 1 + // Here need to change the dev in the array + for(i=0;ilink_pair_num;i++) + { + struct link_pair_st *link_pair = &sysinfo->link_pair[i]; + if(link_pair->udev == PCI_DEV(bus, real_last_unitid, 0)) { + link_pair->udev = PCI_DEV(bus, HT_CHAIN_END_UNITID_BASE, 0); + continue; + } + if(link_pair->dev == PCI_DEV(bus, real_last_unitid, 0)) { + link_pair->dev = PCI_DEV(bus, HT_CHAIN_END_UNITID_BASE, 0); + } + } + #endif + + } +#endif + +#if RAMINIT_SYSINFO == 0 return reset_needed; +#endif + } +#if RAMINIT_SYSINFO == 1 +static void ht_setup_chain(device_t udev, unsigned upos, struct sys_info *sysinfo) +#else static int ht_setup_chain(device_t udev, unsigned upos) +#endif { + unsigned offset_unitid = 0; +#if HT_CHAIN_UNITID_BASE != 1 + offset_unitid = 1; +#endif + /* Assumption the HT chain that is bus 0 has the HT I/O Hub on it. * On most boards this just happens. If a cpu has multiple * non Coherent links the appropriate bus registers for the @@ -478,9 +601,17 @@ static int ht_setup_chain(device_t udev, unsigned upos) */ /* Make certain the HT bus is not enumerated */ - ht_collapse_previous_enumeration(0); + ht_collapse_previous_enumeration(0, 0); - return ht_setup_chainx(udev, upos, 0); +#if HT_CHAIN_UNITID_BASE != 1 + offset_unitid = 1; +#endif + +#if RAMINIT_SYSINFO == 1 + ht_setup_chainx(udev, upos, 0, offset_unitid, sysinfo); +#else + return ht_setup_chainx(udev, upos, 0, offset_unitid); +#endif } static int optimize_link_read_pointer(uint8_t node, uint8_t linkn, uint8_t linkt, uint8_t val) { @@ -506,7 +637,7 @@ static int optimize_link_read_pointer(uint8_t node, uint8_t linkn, uint8_t linkt return 0; } -static int optimize_link_in_coherent(uint8_t ht_c_num) +static int optimize_link_read_pointers_chain(uint8_t ht_c_num) { int reset_needed; uint8_t i; @@ -541,20 +672,28 @@ static int optimize_link_in_coherent(uint8_t ht_c_num) return reset_needed; } +#if RAMINIT_SYSINFO == 1 +static void ht_setup_chains(uint8_t ht_c_num, struct sys_info *sysinfo) +#else static int ht_setup_chains(uint8_t ht_c_num) +#endif { /* Assumption the HT chain that is bus 0 has the HT I/O Hub on it. * On most boards this just happens. If a cpu has multiple * non Coherent links the appropriate bus registers for the * links needs to be programed to point at bus 0. */ - int reset_needed; uint8_t upos; device_t udev; uint8_t i; - reset_needed = 0; +#if RAMINIT_SYSINFO == 0 + int reset_needed = 0; +#else + sysinfo->link_pair_num = 0; +#endif + // first one is SB Chain for (i = 0; i < ht_c_num; i++) { uint32_t reg; uint8_t devpos; @@ -564,6 +703,7 @@ static int ht_setup_chains(uint8_t ht_c_num) #if (USE_DCACHE_RAM == 1) && (K8_SCAN_PCI_BUS == 1) unsigned bus; #endif + unsigned offset_unitid = 0; reg = pci_read_config32(PCI_DEV(0,0x18,1), 0xe0 + i * 4); @@ -576,32 +716,57 @@ static int ht_setup_chains(uint8_t ht_c_num) dword &= ~(0xffff<<8); dword |= (reg & 0xffff0000)>>8; pci_write_config32( PCI_DEV(0, devpos,0), regpos , dword); - + + + #if HT_CHAIN_UNITID_BASE != 1 + #if SB_HT_CHAIN_UNITID_OFFSET_ONLY == 1 + if(i==0) // to check if it is sb ht chain + #endif + offset_unitid = 1; + #endif + /* Make certain the HT bus is not enumerated */ - ht_collapse_previous_enumeration(busn); + ht_collapse_previous_enumeration(busn, offset_unitid); upos = ((reg & 0xf00)>>8) * 0x20 + 0x80; udev = PCI_DEV(0, devpos, 0); - - reset_needed |= ht_setup_chainx(udev,upos,busn); + +#if RAMINIT_SYSINFO == 1 + ht_setup_chainx(udev,upos,busn, offset_unitid, sysinfo); // all not +#else + reset_needed |= ht_setup_chainx(udev,upos,busn, offset_unitid); //all not +#endif #if (USE_DCACHE_RAM == 1) && (K8_SCAN_PCI_BUS == 1) /* You can use use this in romcc, because there is function call in romcc, recursive will kill you */ bus = busn; // we need 32 bit - reset_needed |= (scan_pci_bus(bus)>>16); // take out reset_needed that stored in upword +#if RAMINIT_SYSINFO == 1 + scan_pci_bus(bus, sysinfo); +#else + reset_needed |= (scan_pci_bus(bus)>>16); // take out reset_needed that stored in upword +#endif #endif } - reset_needed |= optimize_link_in_coherent(ht_c_num); - +#if RAMINIT_SYSINFO == 0 + reset_needed |= optimize_link_read_pointers_chain(ht_c_num); + return reset_needed; +#endif + } -#ifndef K8_ALLOCATE_IO_RANGE - #define K8_ALLOCATE_IO_RANGE 0 -#endif +static inline unsigned get_nodes(void) +{ + return ((pci_read_config32(PCI_DEV(0, 0x18, 0), 0x60)>>4) & 7) + 1; +} + +#if RAMINIT_SYSINFO == 1 +static void ht_setup_chains_x(struct sys_info *sysinfo) +#else static int ht_setup_chains_x(void) +#endif { uint8_t nodeid; uint32_t reg; @@ -612,11 +777,18 @@ static int ht_setup_chains_x(void) #if K8_ALLOCATE_IO_RANGE == 1 unsigned next_io_base; #endif - + + nodes = get_nodes(); + /* read PCI_DEV(0,0x18,0) 0x64 bit [8:9] to find out SbLink m */ reg = pci_read_config32(PCI_DEV(0, 0x18, 0), 0x64); /* update PCI_DEV(0, 0x18, 1) 0xe0 to 0x05000m03, and next_busn=0x3f+1 */ print_linkn_in("SBLink=", ((reg>>8) & 3) ); +#if RAMINIT_SYSINFO == 1 + sysinfo->sblnk = (reg>>8) & 3; + sysinfo->sbbusn = 0; + sysinfo->nodes = nodes; +#endif tempreg = 3 | ( 0<<4) | (((reg>>8) & 3)<<8) | (0<<16)| (0x3f<<24); pci_write_config32(PCI_DEV(0, 0x18, 1), 0xe0, tempreg); @@ -639,8 +811,6 @@ static int ht_setup_chains_x(void) pci_write_config32(PCI_DEV(0, 0x18, 1), 0xc0 + ht_c_num * 8, 0); } - nodes = ((pci_read_config32(PCI_DEV(0, 0x18, 0), 0x60)>>4) & 7) + 1; - for(nodeid=0; nodeidht_c_num = i; + ht_setup_chains(i, sysinfo); +#else + return ht_setup_chains(i); +#endif } + +#if RAMINIT_SYSINFO == 1 +static int optimize_link_incoherent_ht(struct sys_info *sysinfo) +{ + // We need to use recorded link pair info to optimize the link + int i; + int reset_needed = 0; + + unsigned link_pair_num = sysinfo->link_pair_num; + + for(i=0; i< link_pair_num; i++) { + struct link_pair_st *link_pair= &sysinfo->link_pair[i]; + reset_needed |= ht_optimize_link(link_pair->udev, link_pair->upos, link_pair->uoffs, link_pair->dev, link_pair->pos, link_pair->offs); + } + + reset_needed |= optimize_link_read_pointers(sysinfo->ht_c_num); + + return reset_needed; + +} +#endif + + +static unsigned get_sblnk(void) +{ + uint32_t reg; + /* read PCI_DEV(0,0x18,0) 0x64 bit [8:9] to find out SbLink m */ + reg = pci_read_config32(PCI_DEV(0, 0x18, 0), 0x64); + return ((reg>>8) & 3) ; +} + +/* Look up a which bus a given node/link combination is on. + * return 0 when we can't find the answer. + */ +static unsigned node_link_to_bus(unsigned node, unsigned link) +{ + unsigned reg; + + for(reg = 0xE0; reg < 0xF0; reg += 0x04) { + unsigned config_map; + config_map = pci_read_config32(PCI_DEV(0, 0x18, 1), reg); + if ((config_map & 3) != 3) { + continue; + } + if ((((config_map >> 4) & 7) == node) && + (((config_map >> 8) & 3) == link)) + { + return (config_map >> 16) & 0xff; + } + } + return 0; +} + diff --git a/src/northbridge/amd/amdk8/misc_control.c b/src/northbridge/amd/amdk8/misc_control.c index 4cd3d0d42d..c7176c3b0d 100644 --- a/src/northbridge/amd/amdk8/misc_control.c +++ b/src/northbridge/amd/amdk8/misc_control.c @@ -17,7 +17,8 @@ #include #include #include -#include "./cpu_rev.c" +#include + #include "amdk8.h" /** diff --git a/src/northbridge/amd/amdk8/northbridge.c b/src/northbridge/amd/amdk8/northbridge.c index 9febac2f06..d2db902beb 100644 --- a/src/northbridge/amd/amdk8/northbridge.c +++ b/src/northbridge/amd/amdk8/northbridge.c @@ -2,6 +2,7 @@ 2004.12 yhlu add dual core support 2005.01 yhlu add support move apic before pci_domain in MB Config.lb 2005.02 yhlu add e0 memory hole support + 2005.11 yhlu add put sb ht chain on bus 0 */ #include @@ -96,16 +97,15 @@ static unsigned int amdk8_nodeid(device_t dev) return (dev->path.u.pci.devfn >> 3) - 0x18; } -static unsigned int amdk8_scan_chains(device_t dev, unsigned int max) +static unsigned int amdk8_scan_chain(device_t dev, unsigned nodeid, unsigned link, unsigned sblink, unsigned int max, unsigned offset_unitid) { - unsigned nodeid; - unsigned link; - nodeid = amdk8_nodeid(dev); #if 0 printk_debug("%s amdk8_scan_chains max: %d starting...\n", dev_path(dev), max); #endif - for(link = 0; link < dev->links; link++) { +// I want to put sb chain in bus 0 can I? + + uint32_t link_type; uint32_t busses, config_busses; unsigned free_reg, config_reg; @@ -114,13 +114,13 @@ static unsigned int amdk8_scan_chains(device_t dev, unsigned int max) link_type = pci_read_config32(dev, dev->link[link].cap + 0x18); } while(link_type & ConnectionPending); if (!(link_type & LinkConnected)) { - continue; + return max; } do { link_type = pci_read_config32(dev, dev->link[link].cap + 0x18); } while(!(link_type & InitComplete)); if (!(link_type & NonCoherent)) { - continue; + return max; } /* See if there is an available configuration space mapping * register in function 1. @@ -146,14 +146,21 @@ static unsigned int amdk8_scan_chains(device_t dev, unsigned int max) * register skip this bus */ if (config_reg > 0xec) { - continue; + return max; } /* Set up the primary, secondary and subordinate bus numbers. * We have no idea how many busses are behind this bridge yet, * so we set the subordinate bus number to 0xff for the moment. */ - dev->link[link].secondary = ++max; +#if K8_SB_HT_CHAIN_ON_BUS0 == 1 + if((nodeid == 0) && (sblink==link)) { // actually max is 0 here + dev->link[link].secondary = max; + } + else +#endif + dev->link[link].secondary = ++max; + dev->link[link].subordinate = 0xff; /* Read the existing primary/secondary/subordinate bus @@ -188,7 +195,7 @@ static unsigned int amdk8_scan_chains(device_t dev, unsigned int max) /* Now we can scan all of the subordinate busses i.e. the * chain on the hypertranport link */ - max = hypertransport_scan_chain(&dev->link[link], 0, 0xbf, max); + max = hypertransport_scan_chain(&dev->link[link], 0, 0xbf, max, offset_unitid); #if 0 printk_debug("%s Hyper transport scan link: %d new max: %d\n", @@ -211,14 +218,57 @@ static unsigned int amdk8_scan_chains(device_t dev, unsigned int max) printk_debug("%s Hypertransport scan link: %d done\n", dev_path(dev), link); #endif - } + + return max; +} + +static unsigned int amdk8_scan_chains(device_t dev, unsigned int max) +{ + unsigned nodeid; + unsigned link; + unsigned sblink = 0; + unsigned offset_unitid = 0; + nodeid = amdk8_nodeid(dev); + + #if 0 - printk_debug("%s amdk8_scan_chains max: %d done\n", - dev_path(dev), max); + printk_debug("%s amdk8_scan_chains max: %d starting...\n", + dev_path(dev), max); #endif - return max; +// I want to put sb chain in bus 0 + + if(nodeid==0) { + sblink = (pci_read_config32(dev, 0x64)>>8) & 3; +#if K8_SB_HT_CHAIN_ON_BUS0 == 1 + #if HT_CHAIN_UNITID_BASE != 1 + offset_unitid = 1; + #endif + max = amdk8_scan_chain(dev, nodeid, sblink, sblink, max, offset_unitid ); // do sb ht chain at first, in case s2885 put sb chain (8131/8111) on link2, but put 8151 on link0 +#endif + } + + for(link = 0; link < dev->links; link++) { +#if K8_SB_HT_CHAIN_ON_BUS0 == 1 + if( (nodeid == 0) && (sblink == link) ) continue; //already done +#endif + offset_unitid = 0; + #if HT_CHAIN_UNITID_BASE != 1 + #if SB_HT_CHAIN_UNITID_OFFSET_ONLY == 1 + if((nodeid == 0) && (sblink == link)) + #endif + offset_unitid = 1; + #endif + + max = amdk8_scan_chain(dev, nodeid, link, sblink, max, offset_unitid); + } +#if 0 + printk_debug("%s amdk8_scan_chains max: %d done\n", + dev_path(dev), max); +#endif + return max; } + static int reg_useable(unsigned reg, device_t goal_dev, unsigned goal_nodeid, unsigned goal_link) { @@ -508,7 +558,6 @@ static void amdk8_create_vga_resource(device_t dev, unsigned nodeid) /* release the temp resource */ resource->flags = 0; - } static void amdk8_set_resources(device_t dev) @@ -1041,7 +1090,7 @@ static unsigned int pci_domain_scan_bus(device_t dev, unsigned int max) for(reg = 0xe0; reg <= 0xec; reg += 4) { f1_write_config32(reg, 0); } - max = pci_scan_bus(&dev->link[0], PCI_DEVFN(0x18, 0), 0xff, max); + max = pci_scan_bus(&dev->link[0], PCI_DEVFN(0x18, 0), 0xff, max); /* Tune the hypertransport transaction for best performance. * Including enabling relaxed ordering if it is safe. diff --git a/src/sdram/generic_sdram.c b/src/sdram/generic_sdram.c index da14166958..7591fae972 100644 --- a/src/sdram/generic_sdram.c +++ b/src/sdram/generic_sdram.c @@ -1,3 +1,17 @@ + +#ifndef RAMINIT_SYSINFO + #define RAMINIT_SYSINFO 0 +#endif + +static inline void print_debug_sdram_8(const char *strval, uint32_t val) +{ +#if CONFIG_USE_INIT + printk_debug("%s%02x\r\n", strval, val); +#else + print_debug(strval); print_debug_hex8(val); print_debug("\r\n"); +#endif +} + void sdram_no_memory(void) { print_err("No memory!!\r\n"); @@ -7,31 +21,34 @@ void sdram_no_memory(void) } /* Setup SDRAM */ +#if RAMINIT_SYSINFO == 1 +void sdram_initialize(int controllers, const struct mem_controller *ctrl, void *sysinfo) +#else void sdram_initialize(int controllers, const struct mem_controller *ctrl) +#endif { int i; /* Set the registers we can set once to reasonable values */ for(i = 0; i < controllers; i++) { -#if CONFIG_USE_INIT - printk_debug("Ram1.%02x\r\n",i); -#else - print_debug("Ram1."); - print_debug_hex8(i); - print_debug("\r\n"); -#endif + print_debug_sdram_8("Ram1.",i); + + #if RAMINIT_SYSINFO == 1 + sdram_set_registers(ctrl + i , sysinfo); + #else sdram_set_registers(ctrl + i); + #endif } /* Now setup those things we can auto detect */ for(i = 0; i < controllers; i++) { -#if CONFIG_USE_INIT - printk_debug("Ram2.%02x\r\n",i); -#else - print_debug("Ram2."); - print_debug_hex8(i); - print_debug("\r\n"); -#endif - sdram_set_spd_registers(ctrl + i); + print_debug_sdram_8("Ram2.",i); + + #if RAMINIT_SYSINFO == 1 + sdram_set_spd_registers(ctrl + i , sysinfo); + #else + sdram_set_spd_registers(ctrl + i); + #endif + } /* Now that everything is setup enable the SDRAM. @@ -39,7 +56,12 @@ void sdram_initialize(int controllers, const struct mem_controller *ctrl) * we need to it by hand. */ print_debug("Ram3\r\n"); + + #if RAMINIT_SYSINFO == 1 + sdram_enable(controllers, ctrl, sysinfo); + #else sdram_enable(controllers, ctrl); + #endif print_debug("Ram4\r\n"); } diff --git a/src/southbridge/amd/amd8111/amd8111_early_ctrl.c b/src/southbridge/amd/amd8111/amd8111_early_ctrl.c new file mode 100644 index 0000000000..8a648e8d37 --- /dev/null +++ b/src/southbridge/amd/amd8111/amd8111_early_ctrl.c @@ -0,0 +1,41 @@ +/* by yhlu 2005.10 */ +static void hard_reset(struct sys_info *sysinfo) +{ + device_t dev; + + /* Find the device */ + dev = PCI_DEV(sysinfo->sbbusn, sysinfo->sbdn+1, 3); + + set_bios_reset(); + + /* enable cf9 */ + pci_write_config8(dev, 0x41, 0xf1); + /* reset */ + outb(0x0e, 0x0cf9); +} + +static void enable_fid_change_on_sb(struct sys_info *sysinfo) +{ + device_t dev; + /* Find the device */ + dev = PCI_DEV(sysinfo->sbbusn, sysinfo->sbdn+1, 3); + + pci_write_config8(dev, 0x74, 4); + + /* set VFSMAF ( VID/FID System Management Action Field) to 2 */ + pci_write_config32(dev, 0x70, 2<<12); + +} + +static void soft_reset(struct sys_info *sysinfo) +{ + device_t dev; + + /* Find the device */ + dev = PCI_DEV(sysinfo->sbbusn, sysinfo->sbdn+1, 0); + + set_bios_reset(); + pci_write_config8(dev, 0x47, 1); +} + + -- cgit v1.2.3