From 65627dd6bd415aa7194a600eb998fe07026d2004 Mon Sep 17 00:00:00 2001 From: Aaron Durbin Date: Wed, 13 Aug 2014 13:27:14 -0500 Subject: ryu: convert hardware initialization to funit API Use the new funit API to do all the dirty work. BUG=chrome-os-partner:29981 BRANCH=None TEST=Built and ran through depthcharge and into recovery just like before. Change-Id: I8625a06dd847bd3dcfc3ce5a50a31d6aff0b860f Signed-off-by: Patrick Georgi Original-Commit-Id: ebc04a174269ae072eda804e172fd24362f417d2 Original-Change-Id: Ief2d81c5569c33a90fc9458d741edef1dcbd8239 Original-Signed-off-by: Aaron Durbin Original-Reviewed-on: https://chromium-review.googlesource.com/212152 Original-Reviewed-by: Furquan Shaikh Reviewed-on: http://review.coreboot.org/8930 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer --- src/mainboard/google/rush_ryu/bootblock.c | 48 ++++++++++++++++--------------- src/mainboard/google/rush_ryu/mainboard.c | 16 ++++------- src/mainboard/google/rush_ryu/romstage.c | 34 +++++++++++----------- 3 files changed, 47 insertions(+), 51 deletions(-) (limited to 'src') diff --git a/src/mainboard/google/rush_ryu/bootblock.c b/src/mainboard/google/rush_ryu/bootblock.c index e5975d2dbc..ffcffd3634 100644 --- a/src/mainboard/google/rush_ryu/bootblock.c +++ b/src/mainboard/google/rush_ryu/bootblock.c @@ -23,6 +23,7 @@ #include #include #include +#include #include #include #include @@ -30,8 +31,6 @@ #include "pmic.h" -static struct clk_rst_ctlr *clk_rst = (void *)TEGRA_CLK_RST_BASE; - static const struct pad_config uart_console_pads[] = { /* UARTA: tx and rx. */ PAD_CFG_SFIO(KB_ROW9, PINMUX_PULL_NONE, UA3), @@ -45,6 +44,26 @@ static const struct pad_config uart_console_pads[] = { PAD_CFG_UNUSED(UART2_CTS_N), }; +static const struct pad_config pmic_pads[] = { + PAD_CFG_SFIO(PWR_I2C_SCL, PINMUX_INPUT_ENABLE, I2CPMU), + PAD_CFG_SFIO(PWR_I2C_SDA, PINMUX_INPUT_ENABLE, I2CPMU), +}; + +static const struct pad_config spiflash_pads[] = { + /* mosi, miso, clk, cs0 */ + PAD_CFG_SFIO(GPIO_PG6, PINMUX_INPUT_ENABLE | PINMUX_PULL_UP, SPI4), + PAD_CFG_SFIO(GPIO_PG7, PINMUX_INPUT_ENABLE | PINMUX_PULL_UP, SPI4), + PAD_CFG_SFIO(GPIO_PG5, PINMUX_INPUT_ENABLE, SPI4), + PAD_CFG_SFIO(GPIO_PI3, PINMUX_INPUT_ENABLE, SPI4), +}; + +static const struct funit_cfg funits[] = { + /* PMIC on I2C5 (PWR_I2C* pads) at 400kHz. */ + FUNIT_CFG(I2C5, PLLP, 400, pmic_pads, ARRAY_SIZE(pmic_pads)), + /* SPI flash at 33MHz on SPI4 controller. */ + FUNIT_CFG(SBC4, PLLP, 33333, spiflash_pads, ARRAY_SIZE(spiflash_pads)), +}; + void bootblock_mainboard_early_init(void) { soc_configure_pads(uart_console_pads, ARRAY_SIZE(uart_console_pads)); @@ -52,41 +71,24 @@ void bootblock_mainboard_early_init(void) static void set_clock_sources(void) { + struct clk_rst_ctlr *clk_rst = (void *)TEGRA_CLK_RST_BASE; + /* UARTA gets PLLP, deactivate CLK_UART_DIV_OVERRIDE */ writel(PLLP << CLK_SOURCE_SHIFT, &clk_rst->clk_src_uarta); - - clock_configure_source(mselect, PLLP, 102000); - - /* The PMIC is on I2C5 and can run at 400 KHz. */ - clock_configure_i2c_scl_freq(i2c5, PLLP, 400); - - /* TODO: We should be able to set this to 50MHz, but that did not seem - * reliable. */ - clock_configure_source(sbc4, PLLP, 33333); } static const struct pad_config padcfgs[] = { /* Board build id bits 1:0 */ PAD_CFG_GPIO_INPUT(KB_COL4, PINMUX_PULL_NONE), PAD_CFG_GPIO_INPUT(KB_COL3, PINMUX_PULL_NONE), - /* PMIC i2C bus */ - PAD_CFG_SFIO(PWR_I2C_SCL, PINMUX_INPUT_ENABLE, I2CPMU), - PAD_CFG_SFIO(PWR_I2C_SDA, PINMUX_INPUT_ENABLE, I2CPMU), - /* SPI fLash: mosi, miso, clk, cs0 */ - PAD_CFG_SFIO(GPIO_PG6, PINMUX_INPUT_ENABLE | PINMUX_PULL_UP, SPI4), - PAD_CFG_SFIO(GPIO_PG7, PINMUX_INPUT_ENABLE | PINMUX_PULL_UP, SPI4), - PAD_CFG_SFIO(GPIO_PG5, PINMUX_INPUT_ENABLE, SPI4), - PAD_CFG_SFIO(GPIO_PI3, PINMUX_INPUT_ENABLE, SPI4), }; void bootblock_mainboard_init(void) { set_clock_sources(); - /* Enable PMIC I2C controller. */ - clock_enable_clear_reset(0, CLK_H_I2C5, 0, 0, 0, 0); - - /* Set up the pads required to load romstage. */ + /* Set up controllers and pads to load romstage. */ + soc_configure_funits(funits, ARRAY_SIZE(funits)); soc_configure_pads(padcfgs, ARRAY_SIZE(padcfgs)); i2c_init(4); diff --git a/src/mainboard/google/rush_ryu/mainboard.c b/src/mainboard/google/rush_ryu/mainboard.c index 1e80b5b9b2..426c30c5e6 100644 --- a/src/mainboard/google/rush_ryu/mainboard.c +++ b/src/mainboard/google/rush_ryu/mainboard.c @@ -24,11 +24,10 @@ #include #include +#include #include #include -static struct clk_rst_ctlr *clk_rst = (void *)TEGRA_CLK_RST_BASE; - static const struct pad_config mmcpads[] = { /* MMC4 (eMMC) */ PAD_CFG_SFIO(SDMMC4_CLK, PINMUX_INPUT_ENABLE|PINMUX_PULL_DOWN, SDMMC4), @@ -43,17 +42,14 @@ static const struct pad_config mmcpads[] = { PAD_CFG_SFIO(SDMMC4_DAT7, PINMUX_INPUT_ENABLE|PINMUX_PULL_UP, SDMMC4), }; -static void init_mmc(void) -{ - clock_enable_clear_reset(CLK_L_SDMMC4, 0, 0, 0, 0, 0); - clock_configure_source(sdmmc4, PLLP, 48000); - - soc_configure_pads(mmcpads, ARRAY_SIZE(mmcpads)); -} +static const struct funit_cfg funits[] = { + /* MMC on SDMMC4 controller at 48MHz. */ + FUNIT_CFG(SDMMC4, PLLP, 48000, mmcpads, ARRAY_SIZE(mmcpads)), +}; static void mainboard_init(device_t dev) { - init_mmc(); + soc_configure_funits(funits, ARRAY_SIZE(funits)); } static void mainboard_enable(device_t dev) diff --git a/src/mainboard/google/rush_ryu/romstage.c b/src/mainboard/google/rush_ryu/romstage.c index 307c1f7008..f6de3d5b7d 100644 --- a/src/mainboard/google/rush_ryu/romstage.c +++ b/src/mainboard/google/rush_ryu/romstage.c @@ -19,41 +19,39 @@ #include #include +#include #include #include #include -static struct clk_rst_ctlr *clk_rst = (void *)TEGRA_CLK_RST_BASE; - static const struct pad_config padcfgs[] = { /* AP_SYS_RESET_L */ PAD_CFG_GPIO_OUT1(GPIO_PI5, PINMUX_PULL_UP), - /* TPM on I2C3 */ + /* WP_L */ + PAD_CFG_GPIO_INPUT(KB_ROW1, PINMUX_PULL_NONE), +}; + +static const struct pad_config tpm_pads[] = { PAD_CFG_SFIO(CAM_I2C_SCL, PINMUX_INPUT_ENABLE, I2C3), PAD_CFG_SFIO(CAM_I2C_SDA, PINMUX_INPUT_ENABLE, I2C3), - /* EC on I2C2 - pulled to 3.3V */ +}; + +static const struct pad_config ec_i2c_pads[] = { PAD_CFG_SFIO(GEN2_I2C_SCL, PINMUX_OPEN_DRAIN|PINMUX_INPUT_ENABLE, I2C2), PAD_CFG_SFIO(GEN2_I2C_SDA, PINMUX_OPEN_DRAIN|PINMUX_INPUT_ENABLE, I2C2), - /* WP_L */ - PAD_CFG_GPIO_INPUT(KB_ROW1, PINMUX_PULL_NONE), }; -static void configure_clocks(void) -{ - /* TPM on I2C3 */ - clock_enable_clear_reset(0, 0, CLK_U_I2C3, 0, 0, 0); - clock_configure_i2c_scl_freq(i2c3, PLLP, 400); - - /* EC on I2C2 */ - clock_enable_clear_reset(0, CLK_H_I2C2, 0, 0, 0, 0); - clock_configure_i2c_scl_freq(i2c2, PLLP, 100); -} +static const struct funit_cfg funits[] = { + /* TPM on I2C3 @ 400kHz */ + FUNIT_CFG(I2C3, PLLP, 400, tpm_pads, ARRAY_SIZE(tpm_pads)), + /* EC on I2C2 - pulled to 3.3V @ 100kHz */ + FUNIT_CFG(I2C2, PLLP, 100, ec_i2c_pads, ARRAY_SIZE(ec_i2c_pads)), +}; void romstage_mainboard_init(void) { - configure_clocks(); - /* Bring up controller interfaces for ramstage loading. */ + soc_configure_funits(funits, ARRAY_SIZE(funits)); soc_configure_pads(padcfgs, ARRAY_SIZE(padcfgs)); /* TPM */ -- cgit v1.2.3