From 64ed1f1f86826fa8f2e165b8ae27b9658546972a Mon Sep 17 00:00:00 2001 From: Philip Chen Date: Mon, 18 Oct 2021 18:28:14 -0700 Subject: google/trogdor: Support Parade ps8640 Support Parade ps8640 as the second source edp bridge for some trogdor board variants/revisions. BUG=b:194741013 BRANCH=trogdor TEST=verified firmware screen works on lazor rev9 Change-Id: Iae5ccd8d9d33d60e4c37011ecffdd7a05af59ab2 Signed-off-by: Philip Chen Reviewed-on: https://review.coreboot.org/c/coreboot/+/58437 Tested-by: build bot (Jenkins) Reviewed-by: Julius Werner --- src/mainboard/google/trogdor/Kconfig | 1 + src/mainboard/google/trogdor/board.h | 8 +++- src/mainboard/google/trogdor/mainboard.c | 64 +++++++++++++++++++++++++++----- 3 files changed, 63 insertions(+), 10 deletions(-) (limited to 'src') diff --git a/src/mainboard/google/trogdor/Kconfig b/src/mainboard/google/trogdor/Kconfig index be45bb0aeb..e70bc69e96 100644 --- a/src/mainboard/google/trogdor/Kconfig +++ b/src/mainboard/google/trogdor/Kconfig @@ -37,6 +37,7 @@ config BOARD_SPECIFIC_OPTIONS select RTC if !BOARD_GOOGLE_BUBS select MISSING_BOARD_RESET if BOARD_GOOGLE_BUBS select DRIVERS_TI_SN65DSI86BRIDGE + select DRIVER_PARADE_PS8640 select SOC_QUALCOMM_SC7180 select SPI_FLASH select SPI_FLASH_MACRONIX diff --git a/src/mainboard/google/trogdor/board.h b/src/mainboard/google/trogdor/board.h index 19024eb305..208cafc4da 100644 --- a/src/mainboard/google/trogdor/board.h +++ b/src/mainboard/google/trogdor/board.h @@ -25,6 +25,9 @@ #define GPIO_VDD_RESET_1V8 GPIO(87) #define GPIO_EDP_BRIDGE_ENABLE dead_code_t(gpio_t) #define GPIO_EN_PP3300_DX_EDP dead_code_t(gpio_t) +#define GPIO_PS8640_EDP_BRIDGE_PD_L dead_code_t(gpio_t) +#define GPIO_PS8640_EDP_BRIDGE_RST_L dead_code_t(gpio_t) +#define GPIO_PS8640_EDP_BRIDGE_3V3_ENABLE dead_code_t(gpio_t) #else #define GPIO_MIPI_1V8_ENABLE dead_code_t(gpio_t) #define GPIO_AVDD_LCD_ENABLE dead_code_t(gpio_t) @@ -36,6 +39,10 @@ (CONFIG(BOARD_GOOGLE_COACHZ) && board_id() == 0 ? GPIO(52) : \ (CONFIG(BOARD_GOOGLE_LAZOR) || CONFIG(BOARD_GOOGLE_POMPOM) ? GPIO(30) : \ GPIO(67))))) +/*PS8640 specific GPIOs */ +#define GPIO_PS8640_EDP_BRIDGE_PD_L GPIO_EDP_BRIDGE_ENABLE +#define GPIO_PS8640_EDP_BRIDGE_RST_L GPIO(11) +#define GPIO_PS8640_EDP_BRIDGE_3V3_ENABLE GPIO(32) #endif /* Fingerprint-specific GPIOs. Only for fingerprint-enabled devices (e.g. CoachZ). */ @@ -49,7 +56,6 @@ #define GPIO_EN_FP_RAILS dead_code_t(gpio_t) #endif - void setup_chromeos_gpios(void); #endif /* _COREBOOT_SRC_MAINBOARD_GOOGLE_TROGDOR_BOARD_H_ */ diff --git a/src/mainboard/google/trogdor/mainboard.c b/src/mainboard/google/trogdor/mainboard.c index 2d9dac3ce6..55a341fecb 100644 --- a/src/mainboard/google/trogdor/mainboard.c +++ b/src/mainboard/google/trogdor/mainboard.c @@ -9,6 +9,7 @@ #include #include #include +#include #include #include #include @@ -24,7 +25,8 @@ #include #define BRIDGE_BUS QUPV3_0_SE2 -#define BRIDGE_CHIP 0x2d +#define BRIDGE_SN65DSI86_CHIP 0x2d +#define BRIDGE_PS8640_CHIP 0x08 static struct usb_board_data usb0_board_data = { .pll_bias_control_2 = 0x22, @@ -71,7 +73,20 @@ static void load_qup_fw(void) qupv3_se_fw_load_and_init(QUPV3_1_SE5, SE_PROTOCOL_I2C, MIXED); /* Codec I2C */ } -static void power_on_bridge(void) +static bool is_ps8640_bridge(void) +{ + /* + * Because the board_id pins for the early Homestar builds were + * misstuffed, after we enable tri-state board_id pins, a -rev1 + * board reports itself as -rev19, and a -rev2 board reports itself + * as -rev23. We need to account for those quirks here. + */ + return (CONFIG(BOARD_GOOGLE_HOMESTAR) && board_id() >= 4 && + board_id() != 19 && board_id() != 23) || + (CONFIG(BOARD_GOOGLE_LAZOR) && board_id() >= 9); +} + +static void power_on_sn65dsi86_bridge(void) { printk(BIOS_INFO, "%s: Bridge gpio init\n", __func__); @@ -82,6 +97,26 @@ static void power_on_bridge(void) gpio_output(GPIO_EN_PP3300_DX_EDP, 1); } +static void power_on_ps8640_bridge(void) +{ + printk(BIOS_INFO, "%s: Bridge gpio init\n", __func__); + + /* PP3300 EDP panel power supply */ + gpio_output(GPIO_EN_PP3300_DX_EDP, 1); + + gpio_output(GPIO_PS8640_EDP_BRIDGE_3V3_ENABLE, 1); + gpio_output(GPIO_PS8640_EDP_BRIDGE_PD_L, 1); + gpio_output(GPIO_PS8640_EDP_BRIDGE_RST_L, 0); + + /* + * According to ps8640 app note v0.6, wait for 2ms ("t1") after + * VDD33 goes high and then deassert RST. + */ + mdelay(2); + + gpio_output(GPIO_PS8640_EDP_BRIDGE_RST_L, 1); +} + static void configure_mipi_panel(void) { int panel_id = sku_id() >> 8; @@ -154,14 +189,19 @@ static enum cb_err display_init(struct panel_serializable_data *panel) if (mdss_dsi_config(&panel->edid, lanes, dsi_bpp)) return CB_ERR; + if (CONFIG(TROGDOR_HAS_MIPI_PANEL)) { if (mdss_dsi_panel_initialize(panel->init)) return CB_ERR; - } else { - sn65dsi86_bridge_configure(BRIDGE_BUS, BRIDGE_CHIP, &panel->edid, - lanes, dsi_bpp); + } else if (!is_ps8640_bridge()) { + /* + * Parade ps8640 is auto-configured based on a pre-programmed + * SPI-ROM. Only TI sn65dsi86 needs to be configured here. + */ + sn65dsi86_bridge_configure(BRIDGE_BUS, BRIDGE_SN65DSI86_CHIP, + &panel->edid, lanes, dsi_bpp); if (CONFIG(TROGDOR_HAS_BRIDGE_BACKLIGHT)) - sn65dsi86_backlight_enable(BRIDGE_BUS, BRIDGE_CHIP); + sn65dsi86_backlight_enable(BRIDGE_BUS, BRIDGE_SN65DSI86_CHIP); } mdp_dsi_video_config(&panel->edid); @@ -190,12 +230,18 @@ static void display_startup(void) panel = get_mipi_panel(&orientation); if (!panel) return; + } else if (is_ps8640_bridge()) { + power_on_ps8640_bridge(); + ps8640_init(BRIDGE_BUS, BRIDGE_PS8640_CHIP); + if (ps8640_get_edid(BRIDGE_BUS, BRIDGE_PS8640_CHIP, &panel->edid) < 0) + return; } else { enum dp_pll_clk_src ref_clk = SN65_SEL_19MHZ; - power_on_bridge(); + power_on_sn65dsi86_bridge(); mdelay(250); /* Delay for the panel to be up */ - sn65dsi86_bridge_init(BRIDGE_BUS, BRIDGE_CHIP, ref_clk); - if (sn65dsi86_bridge_read_edid(BRIDGE_BUS, BRIDGE_CHIP, &panel->edid) < 0) + sn65dsi86_bridge_init(BRIDGE_BUS, BRIDGE_SN65DSI86_CHIP, ref_clk); + if (sn65dsi86_bridge_read_edid(BRIDGE_BUS, BRIDGE_SN65DSI86_CHIP, + &panel->edid) < 0) return; } -- cgit v1.2.3