From 547d48ab01049a634dccb16d1847524d5ba93e33 Mon Sep 17 00:00:00 2001 From: Myles Watson Date: Fri, 6 Nov 2009 17:32:32 +0000 Subject: Remove some white space and comment differences from devicetree.cb and Config.lb files. These boards have non-trivial differences: gigabyte/m57sli kontron/986lcd-m dell/s1850 via/epia-m700 Signed-off-by: Myles Watson Acked-by: Myles Watson git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4924 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/mainboard/amd/dbm690t/Config.lb | 2 +- src/mainboard/amd/pistachio/Config.lb | 2 +- src/mainboard/gigabyte/m57sli/Config.lb | 428 +++++++++++++--------------- src/mainboard/gigabyte/m57sli/devicetree.cb | 57 ++-- src/mainboard/technexion/tim8690/Config.lb | 2 +- 5 files changed, 234 insertions(+), 257 deletions(-) (limited to 'src') diff --git a/src/mainboard/amd/dbm690t/Config.lb b/src/mainboard/amd/dbm690t/Config.lb index a40bf65b7d..8fffd80411 100644 --- a/src/mainboard/amd/dbm690t/Config.lb +++ b/src/mainboard/amd/dbm690t/Config.lb @@ -136,7 +136,7 @@ config chip.h #Define gpp_configuration, A=0, B=1, C=2, D=3, E=4(default) #Define port_enable, (bit map): GFX(2,3), GPP(4,5,6,7) #Define gfx_dev2_dev3, 0: a link will never be established on Dev2 or Dev3, -# 1: the system allows a PCIE link to be established on Dev2 or Dev3. +# 1: the system allows a PCIE link to be established on Dev2 or Dev3. #Define gfx_dual_slot, 0: single slot, 1: dual slot #Define gfx_lane_reversal, 0: disable lane reversal, 1: enable #Define gfx_tmds, 0: didn't support TMDS, 1: support diff --git a/src/mainboard/amd/pistachio/Config.lb b/src/mainboard/amd/pistachio/Config.lb index 146ab50bf9..93925fa9af 100644 --- a/src/mainboard/amd/pistachio/Config.lb +++ b/src/mainboard/amd/pistachio/Config.lb @@ -136,7 +136,7 @@ config chip.h #Define gpp_configuration, A=0, B=1, C=2, D=3, E=4(default) #Define port_enable, (bit map): GFX(2,3), GPP(4,5,6,7) #Define gfx_dev2_dev3, 0: a link will never be established on Dev2 or Dev3, -# 1: the system allows a PCIE link to be established on Dev2 or Dev3. +# 1: the system allows a PCIE link to be established on Dev2 or Dev3. #Define gfx_dual_slot, 0: single slot, 1: dual slot #Define gfx_lane_reversal, 0: disable lane reversal, 1: enable #Define gfx_tmds, 0: didn't support TMDS, 1: support diff --git a/src/mainboard/gigabyte/m57sli/Config.lb b/src/mainboard/gigabyte/m57sli/Config.lb index 50ecab2ab4..cabb1b29f9 100644 --- a/src/mainboard/gigabyte/m57sli/Config.lb +++ b/src/mainboard/gigabyte/m57sli/Config.lb @@ -1,29 +1,29 @@ -## +## ## This file is part of the coreboot project. -## +## ## Copyright (C) 2007 AMD ## Written by Yinghai Lu for AMD. -## +## ## This program is free software; you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by ## the Free Software Foundation; either version 2 of the License, or ## (at your option) any later version. -## +## ## This program is distributed in the hope that it will be useful, ## but WITHOUT ANY WARRANTY; without even the implied warranty of ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ## GNU General Public License for more details. -## +## ## You should have received a copy of the GNU General Public License ## along with this program; if not, write to the Free Software ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## +## ## CONFIG_XIP_ROM_SIZE must be a power of 2. default CONFIG_XIP_ROM_SIZE = 64 * 1024 include /config/failovercalculation.lb -arch i386 end +arch i386 end ## ## Build the objects we have code for in this directory. @@ -36,28 +36,28 @@ object get_bus_conf.o if CONFIG_GENERATE_MP_TABLE object mptable.o end if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end - if CONFIG_USE_INIT + if CONFIG_USE_INIT makerule ./cache_as_ram_auto.o - depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h" - action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@" + depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@" end else makerule ./cache_as_ram_auto.inc - depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h" - action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@" - action "perl -e 's/\.rodata/.rom.data/g' -pi $@" - action "perl -e 's/\.text/.section .rom.text/g' -pi $@" + depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@" + action "perl -e 's/\.rodata/.rom.data/g' -pi $@" + action "perl -e 's/\.text/.section .rom.text/g' -pi $@" end end if CONFIG_USE_FAILOVER_IMAGE else if CONFIG_AP_CODE_IN_CAR - makerule ./apc_auto.o - depends "$(CONFIG_MAINBOARD)/apc_auto.c option_table.h" - action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/apc_auto.c -o $@" - end - ldscript /arch/i386/init/ldscript_apc.lb + makerule ./apc_auto.o + depends "$(CONFIG_MAINBOARD)/apc_auto.c option_table.h" + action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/apc_auto.c -o $@" + end + ldscript /arch/i386/init/ldscript_apc.lb end end @@ -79,32 +79,32 @@ end mainboardinit cpu/x86/32bit/entry32.inc - if CONFIG_USE_INIT - ldscript /cpu/x86/32bit/entry32.lds - end + if CONFIG_USE_INIT + ldscript /cpu/x86/32bit/entry32.lds + end - if CONFIG_USE_INIT - ldscript /cpu/amd/car/cache_as_ram.lds - end + if CONFIG_USE_INIT + ldscript /cpu/amd/car/cache_as_ram.lds + end ## ## Build our reset vector (This is where coreboot is entered) ## if CONFIG_HAVE_FAILOVER_BOOT - if CONFIG_USE_FAILOVER_IMAGE - mainboardinit cpu/x86/16bit/reset16.inc - ldscript /cpu/x86/16bit/reset16.lds + if CONFIG_USE_FAILOVER_IMAGE + mainboardinit cpu/x86/16bit/reset16.inc + ldscript /cpu/x86/16bit/reset16.lds else - mainboardinit cpu/x86/32bit/reset32.inc - ldscript /cpu/x86/32bit/reset32.lds + mainboardinit cpu/x86/32bit/reset32.inc + ldscript /cpu/x86/32bit/reset32.lds end else - if CONFIG_USE_FALLBACK_IMAGE - mainboardinit cpu/x86/16bit/reset16.inc - ldscript /cpu/x86/16bit/reset16.lds + if CONFIG_USE_FALLBACK_IMAGE + mainboardinit cpu/x86/16bit/reset16.inc + ldscript /cpu/x86/16bit/reset16.lds else - mainboardinit cpu/x86/32bit/reset32.inc - ldscript /cpu/x86/32bit/reset32.lds + mainboardinit cpu/x86/32bit/reset32.inc + ldscript /cpu/x86/32bit/reset32.lds end end @@ -118,12 +118,12 @@ ldscript /southbridge/nvidia/mcp55/id.lds ## ROMSTRAP table for MCP55 ## if CONFIG_HAVE_FAILOVER_BOOT - if CONFIG_USE_FAILOVER_IMAGE + if CONFIG_USE_FAILOVER_IMAGE mainboardinit southbridge/nvidia/mcp55/romstrap.inc ldscript /southbridge/nvidia/mcp55/romstrap.lds end else - if CONFIG_USE_FALLBACK_IMAGE + if CONFIG_USE_FALLBACK_IMAGE mainboardinit southbridge/nvidia/mcp55/romstrap.inc ldscript /southbridge/nvidia/mcp55/romstrap.lds end @@ -135,7 +135,7 @@ end mainboardinit cpu/amd/car/cache_as_ram.inc ### -### This is the early phase of coreboot startup +### This is the early phase of coreboot startup ### Things are delicate and we test to see if we should ### failover to another image. ### @@ -176,209 +176,187 @@ if CONFIG_GENERATE_ACPI_TABLES end ## -## Include the secondary Configuration files +## Include the secondary Configuration files ## config chip.h chip northbridge/amd/amdk8/root_complex - device apic_cluster 0 on - chip cpu/amd/socket_AM2 - device apic 0 on end - end - end - device pci_domain 0 on - chip northbridge/amd/amdk8 #mc0 - device pci 18.0 on - # devices on link 0, link 0 == LDT 0 - chip southbridge/nvidia/mcp55 - device pci 0.0 on end # HT - device pci 1.0 on # LPC - chip superio/ite/it8716f - # Floppy and any LDN - device pnp 2e.0 on - # Watchdog from CLKIN, CLKIN = 24 MHz - irq 0x23 = 0x11 + device apic_cluster 0 on + chip cpu/amd/socket_AM2 + device apic 0 on end + end +end +device pci_domain 0 on + chip northbridge/amd/amdk8 #mc0 + device pci 18.0 on # devices on link 0, link 0 == LDT 0 + chip southbridge/nvidia/mcp55 + device pci 0.0 on end # HT + device pci 1.0 on # LPC + chip superio/ite/it8716f + # Floppy and any LDN + device pnp 2e.0 on + # Watchdog from CLKIN, CLKIN = 24 MHz + irq 0x23 = 0x11 # Serial Flash (SPI only) - #0x24 = 0x1a - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.2 off # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.3 on # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.4 on # EC - io 0x60 = 0x290 - io 0x62 = 0x230 - irq 0x70 = 9 - end - device pnp 2e.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - device pnp 2e.6 on # Mouse - irq 0x70 = 12 - end - device pnp 2e.7 on # GPIO, SPI flash - # pin 84 is not GP10 - irq 0x25 = 0x0 - # pin 21 is GP26, pin 26 is GP21, pin 27 is GP20 - irq 0x26 = 0x43 - # pin 13 is GP35 - irq 0x27 = 0x20 - # pin 70 is not GP46 - #irq 0x28 = 0x0 - # pin 6,3,128,127,126 is GP63,64,65,66,67 - irq 0x29 = 0x81 - # Enable FAN_CTL/FAN_TAC set to 5 (pin 21,23), enable FAN_CTL/FAN_TAC set to 4 (pin 20,22), pin 48 is PCIRST5#, pin91 is PCIRSTIN#, VIN7 is internal voltage divider for VCCH5V, pin 95 is ATXPG, VIN3 is internal voltage divider for VCC5V - #irq 0x2c = 0x1f - # Simple I/O base - io 0x62 = 0x800 - # Serial Flash I/O (SPI only) - io 0x64 = 0x820 - # watch dog force timeout (parallel flash only) - #irq 0x71 = 0x1 - # No WDT interrupt - irq 0x72 = 0x0 - # GPIO pin set 1 disable internal pullup - irq 0xb8 = 0x0 - # GPIO pin set 5 enable internal pullup - irq 0xbc = 0x01 - # SIO pin set 1 alternate function - #irq 0xc0 = 0x0 - # SIO pin set 2 mixed function - irq 0xc1 = 0x43 - # SIO pin set 3 mixed function - irq 0xc2 = 0x20 - # SIO pin set 4 alternate function - #irq 0xc3 = 0x0 - # SIO pin set 1 input mode - #irq 0xc8 = 0x0 - # SIO pin set 2 input mode - irq 0xc9 = 0x0 - # SIO pin set 4 input mode - #irq 0xcb = 0x0 - # Generate SMI# on EC IRQ - #irq 0xf0 = 0x10 - # SMI# level trigger - #irq 0xf1 = 0x40 - # HWMON alert beep pin location - irq 0xf6 = 0x28 - end - device pnp 2e.8 off # MIDI - io 0x60 = 0x300 - irq 0x70 = 10 - end - device pnp 2e.9 off # GAME - io 0x60 = 0x220 - end - device pnp 2e.a off end # CIR + #0x24 = 0x1a + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.2 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 end + device pnp 2e.3 on # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.4 on # EC + io 0x60 = 0x290 + io 0x62 = 0x230 + irq 0x70 = 9 + end + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + device pnp 2e.6 on # Mouse + irq 0x70 = 12 + end + device pnp 2e.7 on # GPIO, SPI flash + # pin 84 is not GP10 + irq 0x25 = 0x0 + # pin 21 is GP26, pin 26 is GP21, pin 27 is GP20 + irq 0x26 = 0x43 + # pin 13 is GP35 + irq 0x27 = 0x20 + # pin 70 is not GP46 + #irq 0x28 = 0x0 + # pin 6,3,128,127,126 is GP63,64,65,66,67 + irq 0x29 = 0x81 + # Enable FAN_CTL/FAN_TAC set to 5 (pin 21,23), enable FAN_CTL/FAN_TAC set to 4 (pin 20,22), pin 48 is PCIRST5#, pin91 is PCIRSTIN#, VIN7 is internal voltage divider for VCCH5V, pin 95 is ATXPG, VIN3 is internal voltage divider for VCC5V + #irq 0x2c = 0x1f + # Simple I/O base + io 0x62 = 0x800 + # Serial Flash I/O (SPI only) + io 0x64 = 0x820 + # watch dog force timeout (parallel flash only) + #irq 0x71 = 0x1 + # No WDT interrupt + irq 0x72 = 0x0 + # GPIO pin set 1 disable internal pullup + irq 0xb8 = 0x0 + # GPIO pin set 5 enable internal pullup + irq 0xbc = 0x01 + # SIO pin set 1 alternate function + #irq 0xc0 = 0x0 + # SIO pin set 2 mixed function + irq 0xc1 = 0x43 + # SIO pin set 3 mixed function + irq 0xc2 = 0x20 + # SIO pin set 4 alternate function + #irq 0xc3 = 0x0 + # SIO pin set 1 input mode + #irq 0xc8 = 0x0 + # SIO pin set 2 input mode + irq 0xc9 = 0x0 + # SIO pin set 4 input mode + #irq 0xcb = 0x0 + # Generate SMI# on EC IRQ + #irq 0xf0 = 0x10 + # SMI# level trigger + #irq 0xf1 = 0x40 + # HWMON alert beep pin location + irq 0xf6 = 0x28 + end + device pnp 2e.8 off # MIDI + io 0x60 = 0x300 + irq 0x70 = 10 + end + device pnp 2e.9 off # GAME + io 0x60 = 0x220 + end + device pnp 2e.a off end # CIR + end + end + device pci 1.1 on # SM 0 + chip drivers/generic/generic #dimm 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic #dimm 0-0-1 + device i2c 51 on end end - device pci 1.1 on # SM 0 - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic #dimm 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic #dimm 0-1-1 - device i2c 53 on end - end - chip drivers/generic/generic #dimm 1-0-0 - device i2c 54 on end - end - chip drivers/generic/generic #dimm 1-0-1 - device i2c 55 on end - end - chip drivers/generic/generic #dimm 1-1-0 - device i2c 56 on end - end - chip drivers/generic/generic #dimm 1-1-1 - device i2c 57 on end - end - end # SM + chip drivers/generic/generic #dimm 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic #dimm 0-1-1 + device i2c 53 on end + end + chip drivers/generic/generic #dimm 1-0-0 + device i2c 54 on end + end + chip drivers/generic/generic #dimm 1-0-1 + device i2c 55 on end + end + chip drivers/generic/generic #dimm 1-1-0 + device i2c 56 on end + end + chip drivers/generic/generic #dimm 1-1-1 + device i2c 57 on end + end + end # SM #WTF?!? We already have device pci 1.1 in the section above - device pci 1.1 on # SM 1 -#PCI device smbus address will depend on addon pci device, do we need to scan_smbus_bus? -# chip drivers/generic/generic #PCIXA Slot1 -# device i2c 50 on end -# end -# chip drivers/generic/generic #PCIXB Slot1 -# device i2c 51 on end -# end -# chip drivers/generic/generic #PCIXB Slot2 -# device i2c 52 on end -# end -# chip drivers/generic/generic #PCI Slot1 -# device i2c 53 on end -# end -# chip drivers/generic/generic #Master MCP55 PCI-E -# device i2c 54 on end -# end -# chip drivers/generic/generic #Slave MCP55 PCI-E -# device i2c 55 on end -# end - chip drivers/generic/generic #MAC EEPROM - device i2c 51 on end - end - - end # SM - device pci 2.0 on end # USB 1.1 - device pci 2.1 on end # USB 2 - device pci 4.0 on end # IDE - device pci 5.0 on end # SATA 0 - device pci 5.1 on end # SATA 1 - device pci 5.2 on end # SATA 2 - device pci 6.0 on end # PCI - device pci 6.1 on end # AZA - device pci 8.0 on end # NIC - device pci 9.0 off end # NIC - device pci a.0 on end # PCI E 5 - device pci b.0 on end # PCI E 4 - device pci c.0 on end # PCI E 3 - device pci d.0 on end # PCI E 2 - device pci e.0 on end # PCI E 1 - device pci f.0 on end # PCI E 0 - register "ide0_enable" = "1" - register "sata0_enable" = "1" - register "sata1_enable" = "1" + device pci 1.1 on # SM 1 + chip drivers/generic/generic #MAC EEPROM + device i2c 51 on end + end + end # SM + device pci 2.0 on end # USB 1.1 + device pci 2.1 on end # USB 2 + device pci 4.0 on end # IDE + device pci 5.0 on end # SATA 0 + device pci 5.1 on end # SATA 1 + device pci 5.2 on end # SATA 2 + device pci 6.0 on end # PCI + device pci 6.1 on end # AZA + device pci 8.0 on end # NIC + device pci 9.0 off end # NIC + device pci a.0 on end # PCI E 5 + device pci b.0 on end # PCI E 4 + device pci c.0 on end # PCI E 3 + device pci d.0 on end # PCI E 2 + device pci e.0 on end # PCI E 1 + device pci f.0 on end # PCI E 0 + register "ide0_enable" = "1" + register "sata0_enable" = "1" + register "sata1_enable" = "1" register "mac_eeprom_smbus" = "3" # 1: smbus under 2e.8, 2: SM0 3: SM1 register "mac_eeprom_addr" = "0x51" end - end # device pci 18.0 + end #device pci 18.0 device pci 18.0 on end # Link 1 device pci 18.0 on end device pci 18.1 on end device pci 18.2 on end device pci 18.3 on end end # mc0 - end # PCI domain - -# chip drivers/generic/debug -# device pnp 0.0 off end # chip name -# device pnp 0.1 on end # pci_regs_all -# device pnp 0.2 on end # mem -# device pnp 0.3 off end # cpuid -# device pnp 0.4 on end # smbus_regs_all -# device pnp 0.5 off end # dual core msr -# device pnp 0.6 off end # cache size -# device pnp 0.7 off end # tsc -# device pnp 0.8 off end # io -# device pnp 0.9 off end # io -# end + +# chip drivers/generic/debug +# device pnp 0.0 off end # chip name +# device pnp 0.1 on end # pci_regs_all +# device pnp 0.2 on end # mem +# device pnp 0.3 off end # cpuid +# device pnp 0.4 on end # smbus_regs_all +# device pnp 0.5 off end # dual core msr +# device pnp 0.6 off end # cache size +# device pnp 0.7 off end # tsc +# device pnp 0.8 off end # io +# device pnp 0.9 off end # io +# end end #root_complex diff --git a/src/mainboard/gigabyte/m57sli/devicetree.cb b/src/mainboard/gigabyte/m57sli/devicetree.cb index 0c5dd3b09f..b403ef890a 100644 --- a/src/mainboard/gigabyte/m57sli/devicetree.cb +++ b/src/mainboard/gigabyte/m57sli/devicetree.cb @@ -5,11 +5,11 @@ chip northbridge/amd/amdk8/root_complex end end device pci_domain 0 on - chip northbridge/amd/amdk8 - device pci 18.0 on - chip southbridge/nvidia/mcp55 - device pci 0.0 on end - device pci 1.0 on + chip northbridge/amd/amdk8 #mc0 + device pci 18.0 on # devices on link 0, link 0 == LDT 0 + chip southbridge/nvidia/mcp55 + device pci 0.0 on end # HT + device pci 1.0 on # LPC chip superio/ite/it8716f # Floppy and any LDN device pnp 2e.0 on @@ -52,7 +52,7 @@ device pci_domain 0 on # pin 21 is GP26, pin 26 is GP21, pin 27 is GP20 irq 0x26 = 0x43 # pin 13 is GP35 - irq 0x27 = 0x20 + irq 0x27 = 0x20 # pin 70 is not GP46 #irq 0x28 = 0x0 # pin 6,3,128,127,126 is GP63,64,65,66,67 @@ -66,7 +66,7 @@ device pci_domain 0 on # watch dog force timeout (parallel flash only) #irq 0x71 = 0x1 # No WDT interrupt - irq 0x72 = 0x0 + irq 0x72 = 0x0 # GPIO pin set 1 disable internal pullup irq 0xb8 = 0x0 # GPIO pin set 5 enable internal pullup @@ -99,11 +99,10 @@ device pci_domain 0 on device pnp 2e.9 off # GAME io 0x60 = 0x220 end - device pnp 2e.a off # CIR - end + device pnp 2e.a off end # CIR end end - device pci 1.1 on + device pci 1.1 on # SM 0 chip drivers/generic/generic #dimm 0-0-0 device i2c 50 on end end @@ -129,22 +128,22 @@ device pci_domain 0 on device i2c 57 on end end end # SM - device pci 2.0 on end # USB 1.1 - device pci 2.1 on end # USB 2 - device pci 4.0 on end # IDE - device pci 5.0 on end # SATA 0 - device pci 5.1 on end # SATA 1 - device pci 5.2 on end # SATA 2 - device pci 6.0 on end # PCI - device pci 6.1 on end # AUDIO - device pci 8.0 on end # NIC - device pci 9.0 off end # N/A - device pci a.0 on end # PCI E 5 - device pci b.0 on end # PCI E 4 - device pci c.0 on end # PCI E 3 - device pci d.0 on end # PCI E 2 - device pci e.0 on end # PCI E 1 - device pci f.0 on end # PCI E 0 + device pci 2.0 on end # USB 1.1 + device pci 2.1 on end # USB 2 + device pci 4.0 on end # IDE + device pci 5.0 on end # SATA 0 + device pci 5.1 on end # SATA 1 + device pci 5.2 on end # SATA 2 + device pci 6.0 on end # PCI + device pci 6.1 on end # AUDIO + device pci 8.0 on end # NIC + device pci 9.0 off end # N/A + device pci a.0 on end # PCI E 5 + device pci b.0 on end # PCI E 4 + device pci c.0 on end # PCI E 3 + device pci d.0 on end # PCI E 2 + device pci e.0 on end # PCI E 1 + device pci f.0 on end # PCI E 0 register "ide0_enable" = "1" register "sata0_enable" = "1" register "sata1_enable" = "1" @@ -153,13 +152,14 @@ device pci_domain 0 on end end #device pci 18.0 device pci 18.0 on end # Link 1 + device pci 18.0 on end device pci 18.1 on end device pci 18.2 on end device pci 18.3 on end end # mc0 end # PCI domain -# chip drivers/generic/debug +# chip drivers/generic/debug # device pnp 0.0 off end # chip name # device pnp 0.1 on end # pci_regs_all # device pnp 0.2 on end # mem @@ -170,6 +170,5 @@ device pci_domain 0 on # device pnp 0.7 off end # tsc # device pnp 0.8 off end # io # device pnp 0.9 off end # io -# end - +# end end #root_complex diff --git a/src/mainboard/technexion/tim8690/Config.lb b/src/mainboard/technexion/tim8690/Config.lb index a40bf65b7d..8fffd80411 100644 --- a/src/mainboard/technexion/tim8690/Config.lb +++ b/src/mainboard/technexion/tim8690/Config.lb @@ -136,7 +136,7 @@ config chip.h #Define gpp_configuration, A=0, B=1, C=2, D=3, E=4(default) #Define port_enable, (bit map): GFX(2,3), GPP(4,5,6,7) #Define gfx_dev2_dev3, 0: a link will never be established on Dev2 or Dev3, -# 1: the system allows a PCIE link to be established on Dev2 or Dev3. +# 1: the system allows a PCIE link to be established on Dev2 or Dev3. #Define gfx_dual_slot, 0: single slot, 1: dual slot #Define gfx_lane_reversal, 0: disable lane reversal, 1: enable #Define gfx_tmds, 0: didn't support TMDS, 1: support -- cgit v1.2.3