From 53485d2eabc4312f5e48429e8f9a5e51b4c961e4 Mon Sep 17 00:00:00 2001 From: Arthur Heymans Date: Sun, 30 Apr 2017 08:29:54 +0200 Subject: nb/intel/gm45/gma.c: Decode EDID before NGI path This allows to use EDID data outside of NGI path without needing to fetch it twice. Change-Id: I6a540b1d036a9f38b44fd004309601630861f6e7 Signed-off-by: Arthur Heymans Reviewed-on: https://review.coreboot.org/19503 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber --- src/northbridge/intel/gm45/gma.c | 150 +++++++++++++++++++-------------------- 1 file changed, 74 insertions(+), 76 deletions(-) (limited to 'src') diff --git a/src/northbridge/intel/gm45/gma.c b/src/northbridge/intel/gm45/gma.c index cbb845171e..6ba43a26c0 100644 --- a/src/northbridge/intel/gm45/gma.c +++ b/src/northbridge/intel/gm45/gma.c @@ -50,12 +50,10 @@ void gtt_write(u32 reg, u32 data) } static void gma_init_lvds(const struct northbridge_intel_gm45_config *info, - u8 *mmio, u32 physbase, u16 piobase, u32 lfb) + u8 *mmio, u32 physbase, u16 piobase, u32 lfb, + struct edid *edid) { - int i; - u8 edid_data[128]; - struct edid edid; struct edid_mode *mode; u32 hactive, vactive, right_border, bottom_border; int hpolarity, vpolarity; @@ -93,17 +91,13 @@ static void gma_init_lvds(const struct northbridge_intel_gm45_config *info, for (i = 0; i <= 0x18; i++) vga_cr_write(i, cr[i]); - intel_gmbus_read_edid(mmio + GMBUS0, 3, 0x50, edid_data, - sizeof(edid_data)); - decode_edid(edid_data, - sizeof(edid_data), &edid); - mode = &edid.mode; - /* Disable screen memory to prevent garbage from appearing. */ vga_sr_write(1, vga_sr_read(1) | 0x20); - hactive = edid.x_resolution; - vactive = edid.y_resolution; + mode = &edid->mode; + + hactive = edid->x_resolution; + vactive = edid->y_resolution; right_border = mode->hborder; bottom_border = mode->vborder; hpolarity = (mode->phsync == '-'); @@ -131,11 +125,11 @@ static void gma_init_lvds(const struct northbridge_intel_gm45_config *info, vga_gr_write(0x10, 0x1); vga_gr_write(0x11, 0); - edid.bytes_per_line = (edid.bytes_per_line + 63) & ~63; + edid->bytes_per_line = (edid->bytes_per_line + 63) & ~63; write32(mmio + DSPCNTR(0), DISPPLANE_BGRX888); write32(mmio + DSPADDR(0), 0); - write32(mmio + DSPSTRIDE(0), edid.bytes_per_line); + write32(mmio + DSPSTRIDE(0), edid->bytes_per_line); write32(mmio + DSPSURF(0), 0); for (i = 0; i < 0x100; i++) write32(mmio + LGC_PALETTE(0) + 4 * i, i * 0x010101); @@ -315,18 +309,17 @@ static void gma_init_lvds(const struct northbridge_intel_gm45_config *info, if (IS_ENABLED(CONFIG_FRAMEBUFFER_KEEP_VESA_MODE)) { memset((void *) lfb, 0, - edid.x_resolution * edid.y_resolution * 4); - set_vbe_mode_info_valid(&edid, lfb); + edid->x_resolution * edid->y_resolution * 4); + set_vbe_mode_info_valid(edid, lfb); } } static void gma_init_vga(const struct northbridge_intel_gm45_config *info, - u8 *mmio, u32 physbase, u16 piobase, u32 lfb) + u8 *mmio, u32 physbase, u16 piobase, u32 lfb, + struct edid *edid) { int i; - u8 edid_data[128]; - struct edid edid; struct edid_mode *mode; u32 hactive, vactive, right_border, bottom_border; int hpolarity, vpolarity; @@ -378,19 +371,13 @@ static void gma_init_vga(const struct northbridge_intel_gm45_config *info, udelay(1); - intel_gmbus_read_edid(mmio + GMBUS0, 2, 0x50, edid_data, - sizeof(edid_data)); - intel_gmbus_stop(mmio + GMBUS0); - decode_edid(edid_data, - sizeof(edid_data), &edid); - mode = &edid.mode; - - /* Disable screen memory to prevent garbage from appearing. */ vga_sr_write(1, vga_sr_read(1) | 0x20); - hactive = edid.x_resolution; - vactive = edid.y_resolution; + mode = &edid->mode; + + hactive = edid->x_resolution; + vactive = edid->y_resolution; right_border = mode->hborder; bottom_border = mode->vborder; hpolarity = (mode->phsync == '-'); @@ -419,12 +406,12 @@ static void gma_init_vga(const struct northbridge_intel_gm45_config *info, vga_gr_write(0x10, 0x1); vga_gr_write(0x11, 0); - edid.bytes_per_line = (edid.bytes_per_line + 63) & ~63; + edid->bytes_per_line = (edid->bytes_per_line + 63) & ~63; write32(mmio + DSPCNTR(0), DISPLAY_PLANE_ENABLE | DISPPLANE_BGRX888); write32(mmio + DSPADDR(0), 0); - write32(mmio + DSPSTRIDE(0), edid.bytes_per_line); + write32(mmio + DSPSTRIDE(0), edid->bytes_per_line); write32(mmio + DSPSURF(0), 0); for (i = 0; i < 0x100; i++) write32(mmio + LGC_PALETTE(0) + 4 * i, i * 0x010101); @@ -584,30 +571,55 @@ static void gma_init_vga(const struct northbridge_intel_gm45_config *info, if (IS_ENABLED(CONFIG_FRAMEBUFFER_KEEP_VESA_MODE)) { memset((void *) lfb, 0, - edid.x_resolution * edid.y_resolution * 4); - set_vbe_mode_info_valid(&edid, lfb); + edid->x_resolution * edid->y_resolution * 4); + set_vbe_mode_info_valid(edid, lfb); } } -/* compare the header of the vga edid header */ -/* if vga is not connected it should not have a correct header */ -static u8 vga_connected(u8 *mmio) +static void gma_ngi(struct device *const dev, struct edid *edid_lvds) { - u8 vga_edid[128]; - u8 header[8] = {0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00}; - intel_gmbus_read_edid(mmio + GMBUS0, 2, 0x50, vga_edid, - sizeof(vga_edid)); + u8 edid_data_vga[128]; + struct edid edid_vga; + int vga_edid_status; + u8 *mmio; + struct northbridge_intel_gm45_config *conf = dev->chip_info; + + mmio = res2mmio(gtt_res, 0, 0); + printk(BIOS_DEBUG, "VGA EDID\n"); + intel_gmbus_read_edid(mmio + GMBUS0, 2, 0x50, edid_data_vga, + sizeof(edid_data_vga)); intel_gmbus_stop(mmio + GMBUS0); - for (int i = 0; i < 8; i++) { - if (vga_edid[i] != header[i]) { - printk(BIOS_DEBUG, "VGA not connected. Using LVDS display\n"); - return 0; - } + vga_edid_status = decode_edid(edid_data_vga, + sizeof(edid_data_vga), &edid_vga); + + u32 physbase; + struct resource *lfb_res; + struct resource *pio_res; + + lfb_res = find_resource(dev, PCI_BASE_ADDRESS_2); + pio_res = find_resource(dev, PCI_BASE_ADDRESS_4); + + physbase = pci_read_config32(dev, 0x5c) & ~0xf; + + if (!(physbase && pio_res && pio_res->base && lfb_res && lfb_res->base)) + return; + + printk(BIOS_SPEW, "Initializing display without OPROM. MMIO 0x%llx\n", + gtt_res->base); + if (vga_edid_status != EDID_ABSENT) { + printk(BIOS_DEBUG, "Initialising display on VGA output\n"); + gma_init_vga(conf, mmio, physbase, pio_res->base, lfb_res->base, + &edid_vga); + } else { + printk(BIOS_DEBUG, "Initialising display on LVDS output\n"); + gma_init_lvds(conf, mmio, physbase, pio_res->base, + lfb_res->base, edid_lvds); } - printk(BIOS_SPEW, "VGA display connected\n"); - return 1; + + /* Linux relies on VBT for panel info. */ + generate_fake_intel_oprom(&conf->gfx, dev, "$VBT CANTIGA"); } static u32 get_cdclk(struct device *const dev) @@ -687,51 +699,37 @@ static void gma_pm_init_post_vbios(struct device *const dev) static void gma_func0_init(struct device *dev) { u32 reg32; + u8 *mmio; + u8 edid_data_lvds[128]; + struct edid edid_lvds; /* IGD needs to be Bus Master */ reg32 = pci_read_config32(dev, PCI_COMMAND); reg32 |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY | PCI_COMMAND_IO; pci_write_config32(dev, PCI_COMMAND, reg32); - /* Init graphics power management */ gtt_res = find_resource(dev, PCI_BASE_ADDRESS_0); - - struct northbridge_intel_gm45_config *conf = dev->chip_info; + if (gtt_res == NULL) + return; + mmio = res2mmio(gtt_res, 0, 0); if (!IS_ENABLED(CONFIG_MAINBOARD_DO_NATIVE_VGA_INIT)) { /* PCI Init, will run VBIOS */ + printk(BIOS_DEBUG, "Initialising IGD using VBIOS\n"); pci_dev_init(dev); } + printk(BIOS_DEBUG, "LVDS EDID\n"); + intel_gmbus_read_edid(mmio + GMBUS0, 3, 0x50, edid_data_lvds, + sizeof(edid_data_lvds)); + intel_gmbus_stop(mmio + GMBUS0); + decode_edid(edid_data_lvds, sizeof(edid_data_lvds), &edid_lvds); + /* Post VBIOS init */ gma_pm_init_post_vbios(dev); - if (IS_ENABLED(CONFIG_MAINBOARD_DO_NATIVE_VGA_INIT)) { - u32 physbase; - struct resource *lfb_res; - struct resource *pio_res; - - lfb_res = find_resource(dev, PCI_BASE_ADDRESS_2); - pio_res = find_resource(dev, PCI_BASE_ADDRESS_4); - - physbase = pci_read_config32(dev, 0x5c) & ~0xf; - - if (gtt_res && gtt_res->base && physbase && pio_res - && pio_res->base && lfb_res && lfb_res->base) { - printk(BIOS_SPEW, - "Initializing VGA without OPROM. MMIO 0x%llx\n", - gtt_res->base); - if (vga_connected(res2mmio(gtt_res, 0, 0))) - gma_init_vga(conf, res2mmio(gtt_res, 0, 0), - physbase, pio_res->base, lfb_res->base); - else - gma_init_lvds(conf, res2mmio(gtt_res, 0, 0), - physbase, pio_res->base, lfb_res->base); - } - - /* Linux relies on VBT for panel info. */ - generate_fake_intel_oprom(&conf->gfx, dev, "$VBT CANTIGA"); - } + if (IS_ENABLED(CONFIG_MAINBOARD_DO_NATIVE_VGA_INIT)) + gma_ngi(dev, &edid_lvds); } static void gma_set_subsystem(device_t dev, unsigned vendor, unsigned device) -- cgit v1.2.3