From 4f2754c7201ef09b1619cc8c2ae9399616374214 Mon Sep 17 00:00:00 2001 From: Werner Zeh Date: Mon, 12 Sep 2016 07:48:51 +0200 Subject: fsp_broadwell_de: Add Kconfig switch for SERIRQ operation mode The serial IRQ (SERIRQ) used by the LPC interface can operate either in continuous or in quiet mode. Add a Kconfig switch to select the desired mode. This switch can now be used on mainboard level to enable the needed mode per mainboard. Change-Id: Ibe246b88164a622f9c71ebe7bab752a083a49a62 Signed-off-by: Werner Zeh Reviewed-on: https://review.coreboot.org/16575 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth --- src/soc/intel/fsp_broadwell_de/Kconfig | 7 +++++++ src/soc/intel/fsp_broadwell_de/include/soc/lpc.h | 4 ++++ src/soc/intel/fsp_broadwell_de/southcluster.c | 9 ++++++++- 3 files changed, 19 insertions(+), 1 deletion(-) (limited to 'src') diff --git a/src/soc/intel/fsp_broadwell_de/Kconfig b/src/soc/intel/fsp_broadwell_de/Kconfig index fc0c76394c..99a2bfd6c2 100644 --- a/src/soc/intel/fsp_broadwell_de/Kconfig +++ b/src/soc/intel/fsp_broadwell_de/Kconfig @@ -81,6 +81,13 @@ config CPU_MICROCODE_HEADER_FILES string default "../intel/cpu/broadwell_de/microcode/M1050663_07000001.h ../intel/cpu/broadwell_de/microcode/M1050662_0000000A.h ../intel/cpu/broadwell_de/microcode/MFF50661_F1000008.h" +config SERIRQ_CONTINUOUS_MODE + bool + default n + help + If you set this option to y, the serial IRQ machine will be + operated in continuous mode. + ## Broadwell-DE Specific FSP Kconfig source src/soc/intel/fsp_broadwell_de/fsp/Kconfig diff --git a/src/soc/intel/fsp_broadwell_de/include/soc/lpc.h b/src/soc/intel/fsp_broadwell_de/include/soc/lpc.h index 60cdc89f51..8cf8889c3f 100644 --- a/src/soc/intel/fsp_broadwell_de/include/soc/lpc.h +++ b/src/soc/intel/fsp_broadwell_de/include/soc/lpc.h @@ -22,6 +22,10 @@ /* LPC Interface Bridge PCI Configuration Registers */ #define REVID 0x08 #define PIRQ_RCR1 0x60 +#define SIRQ_CNTL 0x64 +#define SIRQ_EN 0x80 +#define SIRQ_MODE_QUIET 0x00 +#define SIRQ_MODE_CONT 0x40 #define PIRQ_RCR2 0x68 #define LPC_IO_DEC 0x80 #define LPC_EN 0x82 diff --git a/src/soc/intel/fsp_broadwell_de/southcluster.c b/src/soc/intel/fsp_broadwell_de/southcluster.c index 7ed889662e..e8c8706a5c 100644 --- a/src/soc/intel/fsp_broadwell_de/southcluster.c +++ b/src/soc/intel/fsp_broadwell_de/southcluster.c @@ -215,7 +215,14 @@ static void sc_init(struct device *dev) PCI_COMMAND_MASTER | PCI_COMMAND_SPECIAL); /* Program Serial IRQ register. */ - pci_write_config8(dev, 0x64, 0xd0); + pci_write_config8(dev, SIRQ_CNTL, SIRQ_EN | SIRQ_MODE_CONT); + if (!IS_ENABLED(CONFIG_SERIRQ_CONTINUOUS_MODE)) { + /* If SERIRQ have to operate in quiet mode, it should have been + run in continuous mode for at least one frame first. Use I/O + access to achieve the delay of at least one LPC cycle. */ + outb(inb(0x80), 0x80); + pci_write_config8(dev, SIRQ_CNTL, SIRQ_EN | SIRQ_MODE_QUIET); + } sc_pirq_init(dev); write_pci_config_irqs(); -- cgit v1.2.3