From 3ac92e972d9c9c2ee113ea60eb1c3c5b0a61175a Mon Sep 17 00:00:00 2001 From: Matt DeVillier Date: Sun, 19 Nov 2023 18:34:11 -0600 Subject: mb/purism/librem_cnl: Set edk2 boot timeout for Librem Mini As with other devices with only an external display, the Librem mini/ mini-v2 need a few extra seconds (vs an internal panel) for display init in order for the edk2 boot splash to be visible before the default boot target is booted. TEST=build/boot Librem Mini v2 w/edk2 payload, verify splash screen shown / user has time to enter setup menu. Change-Id: I9d2d514719a9918ee58cc63969b3adae44ac1632 Signed-off-by: Matt DeVillier Reviewed-on: https://review.coreboot.org/c/coreboot/+/80182 Tested-by: build bot (Jenkins) Reviewed-by: Jonathon Hall --- src/mainboard/purism/librem_cnl/Kconfig | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'src') diff --git a/src/mainboard/purism/librem_cnl/Kconfig b/src/mainboard/purism/librem_cnl/Kconfig index f75f316b95..1628ec6c8b 100644 --- a/src/mainboard/purism/librem_cnl/Kconfig +++ b/src/mainboard/purism/librem_cnl/Kconfig @@ -112,3 +112,7 @@ config ENABLE_EC_UART1 U81 on the bottom of the board near the front edge; the IC is not populated. TX is pin 14, RX is pin 19. The signals are 3.3V (do NOT connect directly to an RS-232 serial port). + +config EDK2_BOOT_TIMEOUT + int + default 4 if BOARD_PURISM_LIBREM_MINI || BOARD_PURISM_LIBREM_MINI_V2 -- cgit v1.2.3