From 3879ef49ea4dd2186614295f4aeb9e43c252b553 Mon Sep 17 00:00:00 2001 From: Duncan Laurie Date: Fri, 2 Mar 2018 14:39:47 -0800 Subject: mb/google/fizz: Skip FSP init for UART 0 The GPIO pins for UART 0 on Fizz are routed to the add-in card slot and should not be used as a UART device. coreboot is setting the pins to GPIO Mode but FSP is re-configuring them for Native Mode and the behavior is unexpected when the kernel tries to initialize the UART device. The UART 0 device is PCI function 0 so it needs to be enabled for other functions to be visible to the OS so it can't just be disabled. Instead, set the device to PchSerialIoSkipInit so that FSP will not change the pin state. BUG=b:73006317 TEST=Tested with add-in card on fizz hardware to ensure the pin state does not change when FSP runs or the kernel boots. Change-Id: Id97c1e482ef0d5642fcf9018d802e1d0e073263d Signed-off-by: Duncan Laurie Reviewed-on: https://review.coreboot.org/24973 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin --- src/mainboard/google/fizz/devicetree.cb | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'src') diff --git a/src/mainboard/google/fizz/devicetree.cb b/src/mainboard/google/fizz/devicetree.cb index 5eeb03c648..e7654cfa98 100644 --- a/src/mainboard/google/fizz/devicetree.cb +++ b/src/mainboard/google/fizz/devicetree.cb @@ -304,7 +304,7 @@ chip soc/intel/skylake [PchSerialIoIndexI2C5] = PchSerialIoPci, [PchSerialIoIndexSpi0] = PchSerialIoPci, [PchSerialIoIndexSpi1] = PchSerialIoDisabled, - [PchSerialIoIndexUart0] = PchSerialIoPci, + [PchSerialIoIndexUart0] = PchSerialIoSkipInit, [PchSerialIoIndexUart1] = PchSerialIoDisabled, [PchSerialIoIndexUart2] = PchSerialIoSkipInit, }" -- cgit v1.2.3