From 3063d5dfdee3ccf674b863ca6d22a229210c04a7 Mon Sep 17 00:00:00 2001 From: Jens Rottmann Date: Tue, 31 Aug 2010 19:02:45 +0000 Subject: Make ALIX.2D3 support 2D2 as well. Signed-off-by: Jens Rottmann Acked-by: Myles Watson git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5759 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/mainboard/pcengines/Kconfig | 6 +- src/mainboard/pcengines/alix2d/Kconfig | 31 ++++ src/mainboard/pcengines/alix2d/chip.h | 22 +++ src/mainboard/pcengines/alix2d/cmos.layout | 74 +++++++++ src/mainboard/pcengines/alix2d/devicetree.cb | 46 ++++++ src/mainboard/pcengines/alix2d/irq_tables.c | 117 ++++++++++++++ src/mainboard/pcengines/alix2d/mainboard.c | 39 +++++ src/mainboard/pcengines/alix2d/romstage.c | 219 ++++++++++++++++++++++++++ src/mainboard/pcengines/alix2d3/Kconfig | 31 ---- src/mainboard/pcengines/alix2d3/chip.h | 22 --- src/mainboard/pcengines/alix2d3/cmos.layout | 74 --------- src/mainboard/pcengines/alix2d3/devicetree.cb | 46 ------ src/mainboard/pcengines/alix2d3/irq_tables.c | 114 -------------- src/mainboard/pcengines/alix2d3/mainboard.c | 39 ----- src/mainboard/pcengines/alix2d3/romstage.c | 219 -------------------------- 15 files changed, 551 insertions(+), 548 deletions(-) create mode 100644 src/mainboard/pcengines/alix2d/Kconfig create mode 100644 src/mainboard/pcengines/alix2d/chip.h create mode 100644 src/mainboard/pcengines/alix2d/cmos.layout create mode 100644 src/mainboard/pcengines/alix2d/devicetree.cb create mode 100644 src/mainboard/pcengines/alix2d/irq_tables.c create mode 100644 src/mainboard/pcengines/alix2d/mainboard.c create mode 100644 src/mainboard/pcengines/alix2d/romstage.c delete mode 100644 src/mainboard/pcengines/alix2d3/Kconfig delete mode 100644 src/mainboard/pcengines/alix2d3/chip.h delete mode 100644 src/mainboard/pcengines/alix2d3/cmos.layout delete mode 100644 src/mainboard/pcengines/alix2d3/devicetree.cb delete mode 100644 src/mainboard/pcengines/alix2d3/irq_tables.c delete mode 100644 src/mainboard/pcengines/alix2d3/mainboard.c delete mode 100644 src/mainboard/pcengines/alix2d3/romstage.c (limited to 'src') diff --git a/src/mainboard/pcengines/Kconfig b/src/mainboard/pcengines/Kconfig index bdcd869905..d5d700845c 100644 --- a/src/mainboard/pcengines/Kconfig +++ b/src/mainboard/pcengines/Kconfig @@ -5,13 +5,13 @@ choice config BOARD_PCENGINES_ALIX1C bool "ALIX.1C" -config BOARD_PCENGINES_ALIX2D3 - bool "ALIX.2D3" +config BOARD_PCENGINES_ALIX2D + bool "ALIX.2D2 or 2D3" endchoice source "src/mainboard/pcengines/alix1c/Kconfig" -source "src/mainboard/pcengines/alix2d3/Kconfig" +source "src/mainboard/pcengines/alix2d/Kconfig" config MAINBOARD_VENDOR string diff --git a/src/mainboard/pcengines/alix2d/Kconfig b/src/mainboard/pcengines/alix2d/Kconfig new file mode 100644 index 0000000000..f0997fda5e --- /dev/null +++ b/src/mainboard/pcengines/alix2d/Kconfig @@ -0,0 +1,31 @@ +if BOARD_PCENGINES_ALIX2D + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select ARCH_X86 + select CPU_AMD_LX + select NORTHBRIDGE_AMD_LX + select SOUTHBRIDGE_AMD_CS5536 + select HAVE_PIRQ_TABLE + select PIRQ_ROUTE + select UDELAY_TSC + select CACHE_AS_RAM + select BOARD_ROMSIZE_KB_512 + +config MAINBOARD_DIR + string + default pcengines/alix2d + +config MAINBOARD_PART_NUMBER + string + default "ALIX.2D" + +config IRQ_SLOT_COUNT + int + default 7 + +config RAMBASE + hex + default 0x4000 + +endif # BOARD_PCENGINES_ALIX2D diff --git a/src/mainboard/pcengines/alix2d/chip.h b/src/mainboard/pcengines/alix2d/chip.h new file mode 100644 index 0000000000..fb321d557e --- /dev/null +++ b/src/mainboard/pcengines/alix2d/chip.h @@ -0,0 +1,22 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +extern struct chip_operations mainboard_ops; + +struct mainboard_config {}; diff --git a/src/mainboard/pcengines/alix2d/cmos.layout b/src/mainboard/pcengines/alix2d/cmos.layout new file mode 100644 index 0000000000..c1354a2866 --- /dev/null +++ b/src/mainboard/pcengines/alix2d/cmos.layout @@ -0,0 +1,74 @@ +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +1008 16 h 0 check_sum + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM + +checksums + +checksum 392 1007 1008 + + diff --git a/src/mainboard/pcengines/alix2d/devicetree.cb b/src/mainboard/pcengines/alix2d/devicetree.cb new file mode 100644 index 0000000000..edcbc06623 --- /dev/null +++ b/src/mainboard/pcengines/alix2d/devicetree.cb @@ -0,0 +1,46 @@ +chip northbridge/amd/lx + device pci_domain 0 on + device pci 1.0 on end + device pci 1.1 on end + chip southbridge/amd/cs5536 + # IRQ 12 and 1 unmasked, Keyboard and Mouse IRQs. OK + # SIRQ Mode = Active(Quiet) mode. Save power.... + # Invert mask = IRQ 12 and 1 are active high. Keyboard and Mouse IRQs. OK + # How to get these? Boot linux and do this: + # rdmsr 0x51400025 + register "lpc_serirq_enable" = "0x00001002" + # rdmsr 0x5140004e -- polairy is high 16 bits of low 32 bits + register "lpc_serirq_polarity" = "0x0000EFFD" + # mode is high 10 bits (determined from code) + register "lpc_serirq_mode" = "1" + # Don't yet know how to find this. + register "enable_gpio_int_route" = "0x0D0C0700" + register "enable_ide_nand_flash" = "0" # 0:ide mode, 1:flash + register "enable_USBP4_device" = "0" #0: host, 1:device + register "enable_USBP4_overcurrent" = "0" #0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381) + register "com1_enable" = "1" + register "com1_address" = "0x3F8" + register "com1_irq" = "4" + register "com2_enable" = "1" # Wired on Alix.2D13 only + register "com2_address" = "0x2F8" + register "com2_irq" = "3" + register "unwanted_vpci[0]" = "0x80000900" # Disable VGA controller (not wired) + register "unwanted_vpci[1]" = "0x80007B00" # Disable AC97 controller (not wired) + register "unwanted_vpci[2]" = "0" # End of list has a zero + device pci f.0 on end # ISA Bridge + device pci f.1 on end # Flash controller + device pci f.2 on end # IDE controller + device pci f.4 on end # OHCI + device pci f.5 on end # EHCI + end + end + + # APIC cluster is late CPU init. + device lapic_cluster 0 on + chip cpu/amd/model_lx + device lapic 0 on end + end + end + +end + diff --git a/src/mainboard/pcengines/alix2d/irq_tables.c b/src/mainboard/pcengines/alix2d/irq_tables.c new file mode 100644 index 0000000000..7b6b94ab52 --- /dev/null +++ b/src/mainboard/pcengines/alix2d/irq_tables.c @@ -0,0 +1,117 @@ +/* +* This file is part of the coreboot project. +* +* Copyright (C) 2007 Advanced Micro Devices, Inc. +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +#include +#include +#include +#include "../../../southbridge/amd/cs5536/cs5536.h" + +/* Platform IRQs */ +#define PIRQA 11 +#define PIRQB 10 +#define PIRQC 11 +#define PIRQD 9 + +/* Map */ +#define M_PIRQA (1 << PIRQA) /* Bitmap of supported IRQs */ +#define M_PIRQB (1 << PIRQB) /* Bitmap of supported IRQs */ +#define M_PIRQC (1 << PIRQC) /* Bitmap of supported IRQs */ +#define M_PIRQD (1 << PIRQD) /* Bitmap of supported IRQs */ + +/* Link */ +#define L_PIRQA 1 /* Means Slot INTx# Connects To Chipset INTA# */ +#define L_PIRQB 2 /* Means Slot INTx# Connects To Chipset INTB# */ +#define L_PIRQC 3 /* Means Slot INTx# Connects To Chipset INTC# */ +#define L_PIRQD 4 /* Means Slot INTx# Connects To Chipset INTD# */ + +/* + * ALIX.2D3 interrupt wiring. + * + * Devices are: + * 00:01.0 Host bridge [0600]: Advanced Micro Devices [AMD] CS5536 [Geode companion] Host Bridge [1022:2080] (rev 33) + * 00:01.2 Entertainment encryption device [1010]: Advanced Micro Devices [AMD] Geode LX AES Security Block [1022:2082] + * 00:09.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6105M [Rhine-III] [1106:3053] (rev 96) + * 00:0a.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6105M [Rhine-III] [1106:3053] (rev 96) + * 00:0b.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6105M [Rhine-III] [1106:3053] (rev 96) + * 00:0f.0 ISA bridge [0601]: Advanced Micro Devices [AMD] CS5536 [Geode companion] ISA [1022:2090] (rev 03) + * 00:0f.2 IDE interface [0101]: Advanced Micro Devices [AMD] CS5536 [Geode companion] IDE [1022:209a] (rev 01) + * 00:0f.4 USB Controller [0c03]: Advanced Micro Devices [AMD] CS5536 [Geode companion] OHC [1022:2094] (rev 02) + * 00:0f.5 USB Controller [0c03]: Advanced Micro Devices [AMD] CS5536 [Geode companion] EHC [1022:2095] (rev 02) + + * The only devices that interrupt are: + * + * What Device IRQ PIN PIN WIRED TO + * ------------------------------------------------- + * AES 00:01.2 0a 01 A A + * eth0 00:09.0 0b 01 A B + * eth1 00:0a.0 0b 01 A C + * eth2 00:0b.0 0b 01 A D + * mpci 00:0c.0 0a 01 A A + * mpci 00:0c.0 0b 02 B B + * usb 00:0f.4 0b 04 D D + * usb 00:0f.5 0b 04 D D + * + * The only swizzled interrupts are the ethernet controllers, where INTA is wired to + * interrupt controller lines B, C and D. + */ + +const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, + PIRQ_VERSION, + 32 + 16 * CONFIG_IRQ_SLOT_COUNT,/* Max. number of devices on the bus */ + 0x00, /* Where the interrupt router lies (bus) */ + (0x0F << 3) | 0x0, /* Where the interrupt router lies (dev) */ + 0x00, /* IRQs devoted exclusively to PCI usage */ + 0x100B, /* Vendor */ + 0x002B, /* Device */ + 0, /* Crap (miniport) */ + {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, /* u8 rfu[11] */ + 0x00, /* Checksum */ + { + /* If you change the number of entries, change CONFIG_IRQ_SLOT_COUNT above! */ + + /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ + + /* CPU */ + {0x00, (0x01 << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, + + /* On-board ethernet (Left) */ + {0x00, (0x09 << 3) | 0x0, {{L_PIRQB, M_PIRQB}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, + + /* On-board ethernet (Middle, ALIX.2D3 only) */ + {0x00, (0x0A << 3) | 0x0, {{L_PIRQC, M_PIRQC}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, + + /* On-board ethernet (Right) */ + {0x00, (0x0B << 3) | 0x0, {{L_PIRQD, M_PIRQD}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, + + /* Mini PCI (slot 1) */ + {0x00, (0x0C << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, + + /* Mini PCI (slot 2, ALIX.2D2 only) */ + {0x00, (0x0E << 3) | 0x0, {{L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, + + /* Chipset slots -- f.3 wires to B, and f.4 and f.5 wires to D. */ + {0x00, (0x0F << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}}, 0x0, 0x0}, + } +}; + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + return copy_pirq_routing_table(addr); +} diff --git a/src/mainboard/pcengines/alix2d/mainboard.c b/src/mainboard/pcengines/alix2d/mainboard.c new file mode 100644 index 0000000000..b227d6611c --- /dev/null +++ b/src/mainboard/pcengines/alix2d/mainboard.c @@ -0,0 +1,39 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include "chip.h" + +static void init(struct device *dev) +{ + printk(BIOS_DEBUG, "ALIX.2D ENTER %s\n", __func__); + printk(BIOS_DEBUG, "ALIX.2D EXIT %s\n", __func__); +} + +static void enable_dev(struct device *dev) +{ + dev->ops->init = init; +} + +struct chip_operations mainboard_ops = { + CHIP_NAME("PC Engines ALIX.2D Mainboard") + .enable_dev = enable_dev, +}; + diff --git a/src/mainboard/pcengines/alix2d/romstage.c b/src/mainboard/pcengines/alix2d/romstage.c new file mode 100644 index 0000000000..1c00f8781e --- /dev/null +++ b/src/mainboard/pcengines/alix2d/romstage.c @@ -0,0 +1,219 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "lib/ramtest.c" +#include "cpu/x86/bist.h" +#include "cpu/x86/msr.h" +#include +#include +#include "southbridge/amd/cs5536/cs5536.h" + +#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) + +/* The ALIX.2D has no SMBus; the setup is hard-wired. */ +static void cs5536_enable_smbus(void) +{ +} + +#include "southbridge/amd/cs5536/cs5536_early_setup.c" + +/* The part is a Hynix hy5du121622ctp-d43. + * + * HY 5D U 12 16 2 2 C T P D43 + * Hynix + * DDR SDRAM (5D) + * VDD 2.5 VDDQ 2.5 (U) + * 512M 8K REFRESH (12) + * x16 (16) + * 4banks (2) + * SSTL_2 (2) + * 4th GEN die (C) + * Normal Power Consumption ( ) + * TSOP (T) + * Single Die () + * Lead Free (P) + * DDR400 3-3-3 (D43) + */ +/* SPD array */ +static const u8 spdbytes[] = { + [SPD_ACCEPTABLE_CAS_LATENCIES] = 0x10, + [SPD_BANK_DENSITY] = 0x40, + [SPD_DEVICE_ATTRIBUTES_GENERAL] = 0xff, + [SPD_MEMORY_TYPE] = 7, + [SPD_MIN_CYCLE_TIME_AT_CAS_MAX] = 10, /* A guess for the tRAC value */ + [SPD_MODULE_ATTRIBUTES] = 0xff, /* FIXME later when we figure out. */ + [SPD_NUM_BANKS_PER_SDRAM] = 4, + [SPD_PRIMARY_SDRAM_WIDTH] = 8, + [SPD_NUM_DIMM_BANKS] = 1, /* ALIX1.C is 1 bank. */ + [SPD_NUM_COLUMNS] = 0xa, + [SPD_NUM_ROWS] = 3, + [SPD_REFRESH] = 0x3a, + [SPD_SDRAM_CYCLE_TIME_2ND] = 60, + [SPD_SDRAM_CYCLE_TIME_3RD] = 75, + [SPD_tRAS] = 40, + [SPD_tRCD] = 15, + [SPD_tRFC] = 70, + [SPD_tRP] = 15, + [SPD_tRRD] = 10, +}; + +static u8 spd_read_byte(u8 device, u8 address) +{ + print_debug("spd_read_byte dev "); + print_debug_hex8(device); + + if (device != (0x50 << 1)) { + print_debug(" returns 0xff\n"); + return 0xff; + } + + print_debug(" addr "); + print_debug_hex8(address); + print_debug(" returns "); + print_debug_hex8(spdbytes[address]); + print_debug("\n"); + + return spdbytes[address]; +} + +#define ManualConf 0 /* Do automatic strapped PLL config */ +#define PLLMSRhi 0x00001490 /* Manual settings for the PLL */ +#define PLLMSRlo 0x02000030 + +#define DIMM0 0xa0 +#define DIMM1 0xa2 + +#include "northbridge/amd/lx/raminit.h" +#include "northbridge/amd/lx/pll_reset.c" +#include "northbridge/amd/lx/raminit.c" +#include "lib/generic_sdram.c" +#include "cpu/amd/model_lx/cpureginit.c" +#include "cpu/amd/model_lx/syspreinit.c" +#include "cpu/amd/model_lx/msrinit.c" + +/** Early mainboard specific GPIO setup. */ +static void mb_gpio_init(void) +{ + /* + * Disable power button, since it is hardwired to ground on this board, + * and the power would be cut off atfer a 4-second delay otherwise. + */ + outl(0x00020000, PMS_IO_BASE + 0x40); + + /* + * Enable LEDs GPIO outputs to light up the leds + * This is how the original tinyBIOS sets them after boot. + * Info: GPIO_IO_BASE, 0x6100, is only valid before PCI init, so it + * may be used here, but not after PCI Init. + * Note: Prior to a certain release, Linux used a hardwired 0x6100 in the + * leds-alix2.c driver. Coreboot dynamically assigns this space, + * so the driver does not work anymore. + * Good workaround: use the newer driver + * Ugly workaround: $ wrmsr 0x5140000C 0xf00100006100 + * This resets the GPIO I/O space to 0x6100. + * This may break other things, though. + */ + outl(1 << 6, GPIO_IO_BASE + GPIOL_OUTPUT_ENABLE); + outl(1 << 9, GPIO_IO_BASE + GPIOH_OUTPUT_ENABLE); + outl(1 << 11, GPIO_IO_BASE + GPIOH_OUTPUT_ENABLE); + + /* outl(1 << 6, GPIO_IO_BASE + GPIOL_OUTPUT_VALUE); */ /* Led 1 enabled */ + outl(1 << 9, GPIO_IO_BASE + GPIOH_OUTPUT_VALUE); /* Led 2 disabled */ + outl(1 << 11, GPIO_IO_BASE + GPIOH_OUTPUT_VALUE); /* Led 3 disabled */ + + +} + +void main(unsigned long bist) +{ + static const struct mem_controller memctrl[] = { + {.channel0 = {0x50}}, + }; + + post_code(0x01); + + SystemPreInit(); + msr_init(); + + cs5536_early_setup(); + + /* NOTE: Must do this AFTER cs5536_early_setup()! + * It is counting on some early MSR setup for the CS5536. + */ + cs5536_setup_onchipuart(1); + mb_gpio_init(); + uart_init(); + console_init(); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + pll_reset(ManualConf); + + cpuRegInit(0, DIMM0, DIMM1, DRAM_TERMINATED); + + sdram_initialize(1, memctrl); + + /* Check memory */ + /* Enable this only if you are having questions. */ + /* ram_check(0, 640 * 1024); */ + + /* Switch from Cache as RAM to real RAM. + * + * There are two ways we could think about this. + * + * 1. If we are using the romstage.inc ROMCC way, the stack is + * going to be re-setup in the code following this code. Just + * wbinvd the stack to clear the cache tags. We don't care + * where the stack used to be. + * + * 2. This file is built as a normal .c -> .o and linked in + * etc. The stack might be used to return etc. That means we + * care about what is in the stack. If we are smart we set + * the CAR stack to the same location as the rest of + * coreboot. If that is the case we can just do a wbinvd. + * The stack will be written into real RAM that is now setup + * and we continue like nothing happened. If the stack is + * located somewhere other than where LB would like it, you + * need to write some code to do a copy from cache to RAM + * + * We use method 1 on Norwich and on this board too. + */ + post_code(0x02); + print_err("POST 02\n"); + __asm__("wbinvd\n"); + print_err("Past wbinvd\n"); + + /* We are finding the return does not work on this board. Explicitly + * call the label that is after the call to us. This is gross, but + * sometimes at this level it is the only way out. + */ + void done_cache_as_ram_main(void); + done_cache_as_ram_main(); +} + diff --git a/src/mainboard/pcengines/alix2d3/Kconfig b/src/mainboard/pcengines/alix2d3/Kconfig deleted file mode 100644 index 9d57b9dff7..0000000000 --- a/src/mainboard/pcengines/alix2d3/Kconfig +++ /dev/null @@ -1,31 +0,0 @@ -if BOARD_PCENGINES_ALIX2D3 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select ARCH_X86 - select CPU_AMD_LX - select NORTHBRIDGE_AMD_LX - select SOUTHBRIDGE_AMD_CS5536 - select HAVE_PIRQ_TABLE - select PIRQ_ROUTE - select UDELAY_TSC - select CACHE_AS_RAM - select BOARD_ROMSIZE_KB_512 - -config MAINBOARD_DIR - string - default pcengines/alix2d3 - -config MAINBOARD_PART_NUMBER - string - default "ALIX.2D3" - -config IRQ_SLOT_COUNT - int - default 6 - -config RAMBASE - hex - default 0x4000 - -endif # BOARD_PCENGINES_ALIX2D3 diff --git a/src/mainboard/pcengines/alix2d3/chip.h b/src/mainboard/pcengines/alix2d3/chip.h deleted file mode 100644 index fb321d557e..0000000000 --- a/src/mainboard/pcengines/alix2d3/chip.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -extern struct chip_operations mainboard_ops; - -struct mainboard_config {}; diff --git a/src/mainboard/pcengines/alix2d3/cmos.layout b/src/mainboard/pcengines/alix2d3/cmos.layout deleted file mode 100644 index c1354a2866..0000000000 --- a/src/mainboard/pcengines/alix2d3/cmos.layout +++ /dev/null @@ -1,74 +0,0 @@ -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -#96 288 r 0 temporary_filler -0 384 r 0 reserved_memory -384 1 e 4 boot_option -385 1 e 4 last_boot -386 1 e 1 ECC_memory -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -416 4 e 7 boot_first -420 4 e 7 boot_second -424 4 e 7 boot_third -428 4 h 0 boot_index -432 8 h 0 boot_countdown -1008 16 h 0 check_sum - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Network -7 1 HDD -7 2 Floppy -7 8 Fallback_Network -7 9 Fallback_HDD -7 10 Fallback_Floppy -#7 3 ROM - -checksums - -checksum 392 1007 1008 - - diff --git a/src/mainboard/pcengines/alix2d3/devicetree.cb b/src/mainboard/pcengines/alix2d3/devicetree.cb deleted file mode 100644 index edcbc06623..0000000000 --- a/src/mainboard/pcengines/alix2d3/devicetree.cb +++ /dev/null @@ -1,46 +0,0 @@ -chip northbridge/amd/lx - device pci_domain 0 on - device pci 1.0 on end - device pci 1.1 on end - chip southbridge/amd/cs5536 - # IRQ 12 and 1 unmasked, Keyboard and Mouse IRQs. OK - # SIRQ Mode = Active(Quiet) mode. Save power.... - # Invert mask = IRQ 12 and 1 are active high. Keyboard and Mouse IRQs. OK - # How to get these? Boot linux and do this: - # rdmsr 0x51400025 - register "lpc_serirq_enable" = "0x00001002" - # rdmsr 0x5140004e -- polairy is high 16 bits of low 32 bits - register "lpc_serirq_polarity" = "0x0000EFFD" - # mode is high 10 bits (determined from code) - register "lpc_serirq_mode" = "1" - # Don't yet know how to find this. - register "enable_gpio_int_route" = "0x0D0C0700" - register "enable_ide_nand_flash" = "0" # 0:ide mode, 1:flash - register "enable_USBP4_device" = "0" #0: host, 1:device - register "enable_USBP4_overcurrent" = "0" #0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381) - register "com1_enable" = "1" - register "com1_address" = "0x3F8" - register "com1_irq" = "4" - register "com2_enable" = "1" # Wired on Alix.2D13 only - register "com2_address" = "0x2F8" - register "com2_irq" = "3" - register "unwanted_vpci[0]" = "0x80000900" # Disable VGA controller (not wired) - register "unwanted_vpci[1]" = "0x80007B00" # Disable AC97 controller (not wired) - register "unwanted_vpci[2]" = "0" # End of list has a zero - device pci f.0 on end # ISA Bridge - device pci f.1 on end # Flash controller - device pci f.2 on end # IDE controller - device pci f.4 on end # OHCI - device pci f.5 on end # EHCI - end - end - - # APIC cluster is late CPU init. - device lapic_cluster 0 on - chip cpu/amd/model_lx - device lapic 0 on end - end - end - -end - diff --git a/src/mainboard/pcengines/alix2d3/irq_tables.c b/src/mainboard/pcengines/alix2d3/irq_tables.c deleted file mode 100644 index 0dffcb6586..0000000000 --- a/src/mainboard/pcengines/alix2d3/irq_tables.c +++ /dev/null @@ -1,114 +0,0 @@ -/* -* This file is part of the coreboot project. -* -* Copyright (C) 2007 Advanced Micro Devices, Inc. -* -* This program is free software; you can redistribute it and/or modify -* it under the terms of the GNU General Public License version 2 as -* published by the Free Software Foundation. -* -* This program is distributed in the hope that it will be useful, -* but WITHOUT ANY WARRANTY; without even the implied warranty of -* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -* GNU General Public License for more details. -* -* You should have received a copy of the GNU General Public License -* along with this program; if not, write to the Free Software -* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -*/ - -#include -#include -#include -#include "../../../southbridge/amd/cs5536/cs5536.h" - -/* Platform IRQs */ -#define PIRQA 11 -#define PIRQB 10 -#define PIRQC 11 -#define PIRQD 9 - -/* Map */ -#define M_PIRQA (1 << PIRQA) /* Bitmap of supported IRQs */ -#define M_PIRQB (1 << PIRQB) /* Bitmap of supported IRQs */ -#define M_PIRQC (1 << PIRQC) /* Bitmap of supported IRQs */ -#define M_PIRQD (1 << PIRQD) /* Bitmap of supported IRQs */ - -/* Link */ -#define L_PIRQA 1 /* Means Slot INTx# Connects To Chipset INTA# */ -#define L_PIRQB 2 /* Means Slot INTx# Connects To Chipset INTB# */ -#define L_PIRQC 3 /* Means Slot INTx# Connects To Chipset INTC# */ -#define L_PIRQD 4 /* Means Slot INTx# Connects To Chipset INTD# */ - -/* - * ALIX.2D3 interrupt wiring. - * - * Devices are: - * 00:01.0 Host bridge [0600]: Advanced Micro Devices [AMD] CS5536 [Geode companion] Host Bridge [1022:2080] (rev 33) - * 00:01.2 Entertainment encryption device [1010]: Advanced Micro Devices [AMD] Geode LX AES Security Block [1022:2082] - * 00:09.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6105M [Rhine-III] [1106:3053] (rev 96) - * 00:0a.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6105M [Rhine-III] [1106:3053] (rev 96) - * 00:0b.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6105M [Rhine-III] [1106:3053] (rev 96) - * 00:0f.0 ISA bridge [0601]: Advanced Micro Devices [AMD] CS5536 [Geode companion] ISA [1022:2090] (rev 03) - * 00:0f.2 IDE interface [0101]: Advanced Micro Devices [AMD] CS5536 [Geode companion] IDE [1022:209a] (rev 01) - * 00:0f.4 USB Controller [0c03]: Advanced Micro Devices [AMD] CS5536 [Geode companion] OHC [1022:2094] (rev 02) - * 00:0f.5 USB Controller [0c03]: Advanced Micro Devices [AMD] CS5536 [Geode companion] EHC [1022:2095] (rev 02) - - * The only devices that interrupt are: - * - * What Device IRQ PIN PIN WIRED TO - * ------------------------------------------------- - * AES 00:01.2 0a 01 A A - * eth0 00:09.0 0b 01 A B - * eth1 00:0a.0 0b 01 A C - * eth2 00:0b.0 0b 01 A D - * mpci 00:0c.0 0a 01 A A - * mpci 00:0c.0 0b 02 B B - * usb 00:0f.4 0b 04 D D - * usb 00:0f.5 0b 04 D D - * - * The only swizzled interrupts are the ethernet controllers, where INTA is wired to - * interrupt controller lines B, C and D. - */ - -const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, - PIRQ_VERSION, - 32 + 16 * CONFIG_IRQ_SLOT_COUNT,/* Max. number of devices on the bus */ - 0x00, /* Where the interrupt router lies (bus) */ - (0x0F << 3) | 0x0, /* Where the interrupt router lies (dev) */ - 0x00, /* IRQs devoted exclusively to PCI usage */ - 0x100B, /* Vendor */ - 0x002B, /* Device */ - 0, /* Crap (miniport) */ - {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, /* u8 rfu[11] */ - 0x00, /* Checksum */ - { - /* If you change the number of entries, change CONFIG_IRQ_SLOT_COUNT above! */ - - /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - - /* CPU */ - {0x00, (0x01 << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, - - /* On-board ethernet (Left) */ - {0x00, (0x09 << 3) | 0x0, {{L_PIRQB, M_PIRQB}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, - - /* On-board ethernet (Middle) */ - {0x00, (0x0A << 3) | 0x0, {{L_PIRQC, M_PIRQC}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, - - /* On-board ethernet (Right) */ - {0x00, (0x0B << 3) | 0x0, {{L_PIRQD, M_PIRQD}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, - - /* Mini PCI (slot 1) */ - {0x00, (0x0C << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, - - /* Chipset slots -- f.3 wires to B, and f.4 and f.5 wires to D. */ - {0x00, (0x0F << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}}, 0x0, 0x0}, - } -}; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr); -} diff --git a/src/mainboard/pcengines/alix2d3/mainboard.c b/src/mainboard/pcengines/alix2d3/mainboard.c deleted file mode 100644 index 416e3b1264..0000000000 --- a/src/mainboard/pcengines/alix2d3/mainboard.c +++ /dev/null @@ -1,39 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include -#include -#include "chip.h" - -static void init(struct device *dev) -{ - printk(BIOS_DEBUG, "ALIX.2D3 ENTER %s\n", __func__); - printk(BIOS_DEBUG, "ALIX.2D3 EXIT %s\n", __func__); -} - -static void enable_dev(struct device *dev) -{ - dev->ops->init = init; -} - -struct chip_operations mainboard_ops = { - CHIP_NAME("PC Engines ALIX.2D3 Mainboard") - .enable_dev = enable_dev, -}; - diff --git a/src/mainboard/pcengines/alix2d3/romstage.c b/src/mainboard/pcengines/alix2d3/romstage.c deleted file mode 100644 index 3c2480abd2..0000000000 --- a/src/mainboard/pcengines/alix2d3/romstage.c +++ /dev/null @@ -1,219 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "lib/ramtest.c" -#include "cpu/x86/bist.h" -#include "cpu/x86/msr.h" -#include -#include -#include "southbridge/amd/cs5536/cs5536.h" - -#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) - -/* The ALIX.2D3 has no SMBus; the setup is hard-wired. */ -static void cs5536_enable_smbus(void) -{ -} - -#include "southbridge/amd/cs5536/cs5536_early_setup.c" - -/* The part is a Hynix hy5du121622ctp-d43. - * - * HY 5D U 12 16 2 2 C T P D43 - * Hynix - * DDR SDRAM (5D) - * VDD 2.5 VDDQ 2.5 (U) - * 512M 8K REFRESH (12) - * x16 (16) - * 4banks (2) - * SSTL_2 (2) - * 4th GEN die (C) - * Normal Power Consumption ( ) - * TSOP (T) - * Single Die () - * Lead Free (P) - * DDR400 3-3-3 (D43) - */ -/* SPD array */ -static const u8 spdbytes[] = { - [SPD_ACCEPTABLE_CAS_LATENCIES] = 0x10, - [SPD_BANK_DENSITY] = 0x40, - [SPD_DEVICE_ATTRIBUTES_GENERAL] = 0xff, - [SPD_MEMORY_TYPE] = 7, - [SPD_MIN_CYCLE_TIME_AT_CAS_MAX] = 10, /* A guess for the tRAC value */ - [SPD_MODULE_ATTRIBUTES] = 0xff, /* FIXME later when we figure out. */ - [SPD_NUM_BANKS_PER_SDRAM] = 4, - [SPD_PRIMARY_SDRAM_WIDTH] = 8, - [SPD_NUM_DIMM_BANKS] = 1, /* ALIX1.C is 1 bank. */ - [SPD_NUM_COLUMNS] = 0xa, - [SPD_NUM_ROWS] = 3, - [SPD_REFRESH] = 0x3a, - [SPD_SDRAM_CYCLE_TIME_2ND] = 60, - [SPD_SDRAM_CYCLE_TIME_3RD] = 75, - [SPD_tRAS] = 40, - [SPD_tRCD] = 15, - [SPD_tRFC] = 70, - [SPD_tRP] = 15, - [SPD_tRRD] = 10, -}; - -static u8 spd_read_byte(u8 device, u8 address) -{ - print_debug("spd_read_byte dev "); - print_debug_hex8(device); - - if (device != (0x50 << 1)) { - print_debug(" returns 0xff\n"); - return 0xff; - } - - print_debug(" addr "); - print_debug_hex8(address); - print_debug(" returns "); - print_debug_hex8(spdbytes[address]); - print_debug("\n"); - - return spdbytes[address]; -} - -#define ManualConf 0 /* Do automatic strapped PLL config */ -#define PLLMSRhi 0x00001490 /* Manual settings for the PLL */ -#define PLLMSRlo 0x02000030 - -#define DIMM0 0xa0 -#define DIMM1 0xa2 - -#include "northbridge/amd/lx/raminit.h" -#include "northbridge/amd/lx/pll_reset.c" -#include "northbridge/amd/lx/raminit.c" -#include "lib/generic_sdram.c" -#include "cpu/amd/model_lx/cpureginit.c" -#include "cpu/amd/model_lx/syspreinit.c" -#include "cpu/amd/model_lx/msrinit.c" - -/** Early mainboard specific GPIO setup. */ -static void mb_gpio_init(void) -{ - /* - * Disable power button, since it is hardwired to ground on this board, - * and the power would be cut off atfer a 4-second delay otherwise. - */ - outl(0x00020000, PMS_IO_BASE + 0x40); - - /* - * Enable LEDs GPIO outputs to light up the leds - * This is how the original tinyBIOS sets them after boot. - * Info: GPIO_IO_BASE, 0x6100, is only valid before PCI init, so it - * may be used here, but not after PCI Init. - * Note: Prior to a certain release, Linux used a hardwired 0x6100 in the - * leds-alix2.c driver. Coreboot dynamically assigns this space, - * so the driver does not work anymore. - * Good workaround: use the newer driver - * Ugly workaround: $ wrmsr 0x5140000C 0xf00100006100 - * This resets the GPIO I/O space to 0x6100. - * This may break other things, though. - */ - outl(1 << 6, GPIO_IO_BASE + GPIOL_OUTPUT_ENABLE); - outl(1 << 9, GPIO_IO_BASE + GPIOH_OUTPUT_ENABLE); - outl(1 << 11, GPIO_IO_BASE + GPIOH_OUTPUT_ENABLE); - - /* outl(1 << 6, GPIO_IO_BASE + GPIOL_OUTPUT_VALUE); */ /* Led 1 enabled */ - outl(1 << 9, GPIO_IO_BASE + GPIOH_OUTPUT_VALUE); /* Led 2 disabled */ - outl(1 << 11, GPIO_IO_BASE + GPIOH_OUTPUT_VALUE); /* Led 3 disabled */ - - -} - -void main(unsigned long bist) -{ - static const struct mem_controller memctrl[] = { - {.channel0 = {0x50}}, - }; - - post_code(0x01); - - SystemPreInit(); - msr_init(); - - cs5536_early_setup(); - - /* NOTE: Must do this AFTER cs5536_early_setup()! - * It is counting on some early MSR setup for the CS5536. - */ - cs5536_setup_onchipuart(1); - mb_gpio_init(); - uart_init(); - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - pll_reset(ManualConf); - - cpuRegInit(0, DIMM0, DIMM1, DRAM_TERMINATED); - - sdram_initialize(1, memctrl); - - /* Check memory */ - /* Enable this only if you are having questions. */ - /* ram_check(0, 640 * 1024); */ - - /* Switch from Cache as RAM to real RAM. - * - * There are two ways we could think about this. - * - * 1. If we are using the romstage.inc ROMCC way, the stack is - * going to be re-setup in the code following this code. Just - * wbinvd the stack to clear the cache tags. We don't care - * where the stack used to be. - * - * 2. This file is built as a normal .c -> .o and linked in - * etc. The stack might be used to return etc. That means we - * care about what is in the stack. If we are smart we set - * the CAR stack to the same location as the rest of - * coreboot. If that is the case we can just do a wbinvd. - * The stack will be written into real RAM that is now setup - * and we continue like nothing happened. If the stack is - * located somewhere other than where LB would like it, you - * need to write some code to do a copy from cache to RAM - * - * We use method 1 on Norwich and on this board too. - */ - post_code(0x02); - print_err("POST 02\n"); - __asm__("wbinvd\n"); - print_err("Past wbinvd\n"); - - /* We are finding the return does not work on this board. Explicitly - * call the label that is after the call to us. This is gross, but - * sometimes at this level it is the only way out. - */ - void done_cache_as_ram_main(void); - done_cache_as_ram_main(); -} - -- cgit v1.2.3