From 2b664dd0a0ba1c8d234642d52bd03fbb2b1f9e50 Mon Sep 17 00:00:00 2001 From: "Ronald G. Minnich" Date: Thu, 25 Sep 2003 17:01:28 +0000 Subject: first cut at 8601 support git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1131 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/northbridge/via/vt8601/Config.lb | 2 + src/northbridge/via/vt8601/chip.h | 5 + src/northbridge/via/vt8601/northbridge.c | 106 ++ src/northbridge/via/vt8601/northbridge.h | 6 + src/northbridge/via/vt8601/raminit.c | 2308 ++++++++++++++++++++++++++++++ src/northbridge/via/vt8601/raminit.h | 4 + 6 files changed, 2431 insertions(+) create mode 100644 src/northbridge/via/vt8601/Config.lb create mode 100644 src/northbridge/via/vt8601/chip.h create mode 100644 src/northbridge/via/vt8601/northbridge.c create mode 100644 src/northbridge/via/vt8601/northbridge.h create mode 100644 src/northbridge/via/vt8601/raminit.c create mode 100644 src/northbridge/via/vt8601/raminit.h (limited to 'src') diff --git a/src/northbridge/via/vt8601/Config.lb b/src/northbridge/via/vt8601/Config.lb new file mode 100644 index 0000000000..4a0c2c8658 --- /dev/null +++ b/src/northbridge/via/vt8601/Config.lb @@ -0,0 +1,2 @@ +config chip.h +object northbridge.o diff --git a/src/northbridge/via/vt8601/chip.h b/src/northbridge/via/vt8601/chip.h new file mode 100644 index 0000000000..b689f0dedd --- /dev/null +++ b/src/northbridge/via/vt8601/chip.h @@ -0,0 +1,5 @@ +struct northbridge_via_vt8601_config +{ +}; + +extern struct chip_control northbridge_via_vt8601_control; diff --git a/src/northbridge/via/vt8601/northbridge.c b/src/northbridge/via/vt8601/northbridge.c new file mode 100644 index 0000000000..33dc4ec758 --- /dev/null +++ b/src/northbridge/via/vt8601/northbridge.c @@ -0,0 +1,106 @@ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "chip.h" +#include "northbridge.h" + +struct mem_range *sizeram(void) +{ + unsigned long mmio_basek; + static struct mem_range mem[10]; + device_t dev; + int i, idx; + +#warning "FIXME handle interleaved nodes" + dev = dev_find_slot(0, PCI_DEVFN(0x18, 1)); + if (!dev) { + printk_err("Cannot find PCI: 0:18.1\n"); + return 0; + } + mmio_basek = (dev_root.resource[1].base >> 10); + /* Round mmio_basek to something the processor can support */ + mmio_basek &= ~((1 << 6) -1); + +#if 1 +#warning "FIXME improve mtrr.c so we don't use up all of the mtrrs with a 64M MMIO hole" + /* Round the mmio hold to 256M */ + mmio_basek &= ~((256*1024) - 1); +#endif + +#if 1 + printk_debug("mmio_base: %dKB\n", mmio_basek); +#endif + + for(idx = i = 0; i < 8; i++) { + uint32_t base, limit; + unsigned basek, limitk, sizek; + base = pci_read_config32(dev, 0x40 + (i<<3)); + limit = pci_read_config32(dev, 0x44 + (i<<3)); + if ((base & ((1<<1)|(1<<0))) != ((1<<1)|(1<<0))) { + continue; + } + basek = (base & 0xffff0000) >> 2; + limitk = ((limit + 0x00010000) & 0xffff0000) >> 2; + sizek = limitk - basek; + if ((idx > 0) && + ((mem[idx -1].basek + mem[idx - 1].sizek) == basek)) { + mem[idx -1].sizek += sizek; + } + else { + mem[idx].basek = basek; + mem[idx].sizek = sizek; + idx++; + } + /* See if I need to split the region to accomodate pci memory space */ + if ((mem[idx - 1].basek <= mmio_basek) && + ((mem[idx - 1].basek + mem[idx - 1].sizek) > mmio_basek)) { + if (mem[idx - 1].basek < mmio_basek) { + unsigned pre_sizek; + pre_sizek = mmio_basek - mem[idx - 1].basek; + mem[idx].basek = mmio_basek; + mem[idx].sizek = mem[idx - 1].sizek - pre_sizek; + mem[idx - 1].sizek = pre_sizek; + idx++; + } + if ((mem[idx - 1].basek + mem[idx - 1].sizek) <= 4*1024*1024) { + idx -= 1; + } + else { + mem[idx - 1].basek = 4*1024*1024; + mem[idx - 1].sizek -= (4*1024*1024 - mmio_basek); + } + } + } +#if 0 + for(i = 0; i < idx; i++) { + printk_debug("mem[%d].basek = %08x mem[%d].sizek = %08x\n", + i, mem[i].basek, i, mem[i].sizek); + } +#endif + while(idx < sizeof(mem)/sizeof(mem[0])) { + mem[idx].basek = 0; + mem[idx].sizek = 0; + idx++; + } + return mem; +} +static void enumerate(struct chip *chip) +{ + extern struct device_operations default_pci_ops_bus; + chip_enumerate(chip); + chip->dev->ops = &default_pci_ops_bus; +} + +struct chip_control northbridge_via_vt8601_control = { + .enumerate = enumerate, + .name = "VIA vt8601 Northbridge", +}; diff --git a/src/northbridge/via/vt8601/northbridge.h b/src/northbridge/via/vt8601/northbridge.h new file mode 100644 index 0000000000..d7f8e605b8 --- /dev/null +++ b/src/northbridge/via/vt8601/northbridge.h @@ -0,0 +1,6 @@ +#ifndef NORTHBRIDGE_VIA_VT8601_H +#define NORTHBRIDGE_VIA_VT8601_H + +extern unsigned int vt8601_scan_root_bus(device_t root, unsigned int max); + +#endif /* NORTHBRIDGE_VIA_VT8601_H */ diff --git a/src/northbridge/via/vt8601/raminit.c b/src/northbridge/via/vt8601/raminit.c new file mode 100644 index 0000000000..802e4318b4 --- /dev/null +++ b/src/northbridge/via/vt8601/raminit.c @@ -0,0 +1,2308 @@ +#include +#include "raminit.h" + +#define ENABLE_IOMMU 1 + +/* Function 2 */ +#define DRAM_CSBASE 0x40 +#define DRAM_CSMASK 0x60 +#define DRAM_BANK_ADDR_MAP 0x80 +#define DRAM_TIMING_LOW 0x88 +#define DTL_TCL_SHIFT 0 +#define DTL_TCL_MASK 0x7 +#define DTL_CL_2 1 +#define DTL_CL_3 2 +#define DTL_CL_2_5 5 +#define DTL_TRC_SHIFT 4 +#define DTL_TRC_MASK 0xf +#define DTL_TRC_BASE 7 +#define DTL_TRC_MIN 7 +#define DTL_TRC_MAX 22 +#define DTL_TRFC_SHIFT 8 +#define DTL_TRFC_MASK 0xf +#define DTL_TRFC_BASE 9 +#define DTL_TRFC_MIN 9 +#define DTL_TRFC_MAX 24 +#define DTL_TRCD_SHIFT 12 +#define DTL_TRCD_MASK 0x7 +#define DTL_TRCD_BASE 0 +#define DTL_TRCD_MIN 2 +#define DTL_TRCD_MAX 6 +#define DTL_TRRD_SHIFT 16 +#define DTL_TRRD_MASK 0x7 +#define DTL_TRRD_BASE 0 +#define DTL_TRRD_MIN 2 +#define DTL_TRRD_MAX 4 +#define DTL_TRAS_SHIFT 20 +#define DTL_TRAS_MASK 0xf +#define DTL_TRAS_BASE 0 +#define DTL_TRAS_MIN 5 +#define DTL_TRAS_MAX 15 +#define DTL_TRP_SHIFT 24 +#define DTL_TRP_MASK 0x7 +#define DTL_TRP_BASE 0 +#define DTL_TRP_MIN 2 +#define DTL_TRP_MAX 6 +#define DTL_TWR_SHIFT 28 +#define DTL_TWR_MASK 0x1 +#define DTL_TWR_BASE 2 +#define DTL_TWR_MIN 2 +#define DTL_TWR_MAX 3 +#define DRAM_TIMING_HIGH 0x8c +#define DTH_TWTR_SHIFT 0 +#define DTH_TWTR_MASK 0x1 +#define DTH_TWTR_BASE 1 +#define DTH_TWTR_MIN 1 +#define DTH_TWTR_MAX 2 +#define DTH_TRWT_SHIFT 4 +#define DTH_TRWT_MASK 0x7 +#define DTH_TRWT_BASE 1 +#define DTH_TRWT_MIN 1 +#define DTH_TRWT_MAX 6 +#define DTH_TREF_SHIFT 8 +#define DTH_TREF_MASK 0x1f +#define DTH_TREF_100MHZ_4K 0x00 +#define DTH_TREF_133MHZ_4K 0x01 +#define DTH_TREF_166MHZ_4K 0x02 +#define DTH_TREF_200MHZ_4K 0x03 +#define DTH_TREF_100MHZ_8K 0x08 +#define DTH_TREF_133MHZ_8K 0x09 +#define DTH_TREF_166MHZ_8K 0x0A +#define DTH_TREF_200MHZ_8K 0x0B +#define DTH_TWCL_SHIFT 20 +#define DTH_TWCL_MASK 0x7 +#define DTH_TWCL_BASE 1 +#define DTH_TWCL_MIN 1 +#define DTH_TWCL_MAX 2 +#define DRAM_CONFIG_LOW 0x90 +#define DCL_DLL_Disable (1<<0) +#define DCL_D_DRV (1<<1) +#define DCL_QFC_EN (1<<2) +#define DCL_DisDqsHys (1<<3) +#define DCL_DramInit (1<<8) +#define DCL_DramEnable (1<<10) +#define DCL_MemClrStatus (1<<11) +#define DCL_ESR (1<<12) +#define DCL_SRS (1<<13) +#define DCL_128BitEn (1<<16) +#define DCL_DimmEccEn (1<<17) +#define DCL_UnBufDimm (1<<18) +#define DCL_32ByteEn (1<<19) +#define DCL_x4DIMM_SHIFT 20 +#define DRAM_CONFIG_HIGH 0x94 +#define DCH_ASYNC_LAT_SHIFT 0 +#define DCH_ASYNC_LAT_MASK 0xf +#define DCH_ASYNC_LAT_BASE 0 +#define DCH_ASYNC_LAT_MIN 0 +#define DCH_ASYNC_LAT_MAX 15 +#define DCH_RDPREAMBLE_SHIFT 8 +#define DCH_RDPREAMBLE_MASK 0xf +#define DCH_RDPREAMBLE_BASE ((2<<1)+0) /* 2.0 ns */ +#define DCH_RDPREAMBLE_MIN ((2<<1)+0) /* 2.0 ns */ +#define DCH_RDPREAMBLE_MAX ((9<<1)+1) /* 9.5 ns */ +#define DCH_IDLE_LIMIT_SHIFT 16 +#define DCH_IDLE_LIMIT_MASK 0x7 +#define DCH_IDLE_LIMIT_0 0 +#define DCH_IDLE_LIMIT_4 1 +#define DCH_IDLE_LIMIT_8 2 +#define DCH_IDLE_LIMIT_16 3 +#define DCH_IDLE_LIMIT_32 4 +#define DCH_IDLE_LIMIT_64 5 +#define DCH_IDLE_LIMIT_128 6 +#define DCH_IDLE_LIMIT_256 7 +#define DCH_DYN_IDLE_CTR_EN (1 << 19) +#define DCH_MEMCLK_SHIFT 20 +#define DCH_MEMCLK_MASK 0x7 +#define DCH_MEMCLK_100MHZ 0 +#define DCH_MEMCLK_133MHZ 2 +#define DCH_MEMCLK_166MHZ 5 +#define DCH_MEMCLK_200MHZ 7 +#define DCH_MEMCLK_VALID (1 << 25) +#define DCH_MEMCLK_EN0 (1 << 26) +#define DCH_MEMCLK_EN1 (1 << 27) +#define DCH_MEMCLK_EN2 (1 << 28) +#define DCH_MEMCLK_EN3 (1 << 29) + +/* Function 3 */ +#define SCRUB_CONTROL 0x58 +#define SCRUB_NONE 0 +#define SCRUB_40ns 1 +#define SCRUB_80ns 2 +#define SCRUB_160ns 3 +#define SCRUB_320ns 4 +#define SCRUB_640ns 5 +#define SCRUB_1_28us 6 +#define SCRUB_2_56us 7 +#define SCRUB_5_12us 8 +#define SCRUB_10_2us 9 +#define SCRUB_20_5us 10 +#define SCRUB_41_0us 11 +#define SCRUB_81_9us 12 +#define SCRUB_163_8us 13 +#define SCRUB_327_7us 14 +#define SCRUB_655_4us 15 +#define SCRUB_1_31ms 16 +#define SCRUB_2_62ms 17 +#define SCRUB_5_24ms 18 +#define SCRUB_10_49ms 19 +#define SCRUB_20_97ms 20 +#define SCRUB_42ms 21 +#define SCRUB_84ms 22 +#define SC_DRAM_SCRUB_RATE_SHFIT 0 +#define SC_DRAM_SCRUB_RATE_MASK 0x1f +#define SC_L2_SCRUB_RATE_SHIFT 8 +#define SC_L2_SCRUB_RATE_MASK 0x1f +#define SC_L1D_SCRUB_RATE_SHIFT 16 +#define SC_L1D_SCRUB_RATE_MASK 0x1f +#define SCRUB_ADDR_LOW 0x5C +#define SCRUB_ADDR_HIGH 0x60 +#define NORTHBRIDGE_CAP 0xE8 +#define NBCAP_128Bit 0x0001 +#define NBCAP_MP 0x0002 +#define NBCAP_BIG_MP 0x0004 +#define NBCAP_ECC 0x0004 +#define NBCAP_CHIPKILL_ECC 0x0010 +#define NBCAP_MEMCLK_SHIFT 5 +#define NBCAP_MEMCLK_MASK 3 +#define NBCAP_MEMCLK_100MHZ 3 +#define NBCAP_MEMCLK_133MHZ 2 +#define NBCAP_MEMCLK_166MHZ 1 +#define NBCAP_MEMCLK_200MHZ 0 +#define NBCAP_MEMCTRL 0x0100 + + +static void setup_resource_map(const unsigned int *register_values, int max) +{ + int i; + print_debug("setting up resource map....\r\n"); + for(i = 0; i < max; i += 3) { + device_t dev; + unsigned where; + unsigned long reg; +#if 0 + print_debug_hex32(register_values[i]); + print_debug(" <-"); + print_debug_hex32(register_values[i+2]); + print_debug("\r\n"); +#endif + dev = register_values[i] & ~0xff; + where = register_values[i] & 0xff; + reg = pci_read_config32(dev, where); + reg &= register_values[i+1]; + reg |= register_values[i+2]; + pci_write_config32(dev, where, reg); +#if 0 + reg = pci_read_config32(register_values[i]); + reg &= register_values[i+1]; + reg |= register_values[i+2] & ~register_values[i+1]; + pci_write_config32(register_values[i], reg); +#endif + } + print_debug("done.\r\n"); +} + +static void setup_default_resource_map(void) +{ + static const unsigned int register_values[] = { + /* Careful set limit registers before base registers which contain the enables */ + /* DRAM Limit i Registers + * F1:0x44 i = 0 + * F1:0x4C i = 1 + * F1:0x54 i = 2 + * F1:0x5C i = 3 + * F1:0x64 i = 4 + * F1:0x6C i = 5 + * F1:0x74 i = 6 + * F1:0x7C i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 3] Reserved + * [10: 8] Interleave select + * specifies the values of A[14:12] to use with interleave enable. + * [15:11] Reserved + * [31:16] DRAM Limit Address i Bits 39-24 + * This field defines the upper address bits of a 40 bit address + * that define the end of the DRAM region. + */ + PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, + PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, + PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, + PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, + PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, + PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, + PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, + /* DRAM Base i Registers + * F1:0x40 i = 0 + * F1:0x48 i = 1 + * F1:0x50 i = 2 + * F1:0x58 i = 3 + * F1:0x60 i = 4 + * F1:0x68 i = 5 + * F1:0x70 i = 6 + * F1:0x78 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 7: 2] Reserved + * [10: 8] Interleave Enable + * 000 = No interleave + * 001 = Interleave on A[12] (2 nodes) + * 010 = reserved + * 011 = Interleave on A[12] and A[14] (4 nodes) + * 100 = reserved + * 101 = reserved + * 110 = reserved + * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) + * [15:11] Reserved + * [13:16] DRAM Base Address i Bits 39-24 + * This field defines the upper address bits of a 40-bit address + * that define the start of the DRAM region. + */ + PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, + + /* Memory-Mapped I/O Limit i Registers + * F1:0x84 i = 0 + * F1:0x8C i = 1 + * F1:0x94 i = 2 + * F1:0x9C i = 3 + * F1:0xA4 i = 4 + * F1:0xAC i = 5 + * F1:0xB4 i = 6 + * F1:0xBC i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = Reserved + * [ 6: 6] Reserved + * [ 7: 7] Non-Posted + * 0 = CPU writes may be posted + * 1 = CPU writes must be non-posted + * [31: 8] Memory-Mapped I/O Limit Address i (39-16) + * This field defines the upp adddress bits of a 40-bit address that + * defines the end of a memory-mapped I/O region n + */ + PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00, + + /* Memory-Mapped I/O Base i Registers + * F1:0x80 i = 0 + * F1:0x88 i = 1 + * F1:0x90 i = 2 + * F1:0x98 i = 3 + * F1:0xA0 i = 4 + * F1:0xA8 i = 5 + * F1:0xB0 i = 6 + * F1:0xB8 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes disabled + * 1 = Writes Enabled + * [ 2: 2] Cpu Disable + * 0 = Cpu can use this I/O range + * 1 = Cpu requests do not use this I/O range + * [ 3: 3] Lock + * 0 = base/limit registers i are read/write + * 1 = base/limit registers i are read-only + * [ 7: 4] Reserved + * [31: 8] Memory-Mapped I/O Base Address i (39-16) + * This field defines the upper address bits of a 40bit address + * that defines the start of memory-mapped I/O region i + */ + PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003, + + /* PCI I/O Limit i Registers + * F1:0xC4 i = 0 + * F1:0xCC i = 1 + * F1:0xD4 i = 2 + * F1:0xDC i = 3 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = reserved + * [11: 6] Reserved + * [24:12] PCI I/O Limit Address i + * This field defines the end of PCI I/O region n + * [31:25] Reserved + */ + PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff000, + PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, + + /* PCI I/O Base i Registers + * F1:0xC0 i = 0 + * F1:0xC8 i = 1 + * F1:0xD0 i = 2 + * F1:0xD8 i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 3: 2] Reserved + * [ 4: 4] VGA Enable + * 0 = VGA matches Disabled + * 1 = matches all address < 64K and where A[9:0] is in the + * range 3B0-3BB or 3C0-3DF independen of the base & limit registers + * [ 5: 5] ISA Enable + * 0 = ISA matches Disabled + * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block + * from matching agains this base/limit pair + * [11: 6] Reserved + * [24:12] PCI I/O Base i + * This field defines the start of PCI I/O region n + * [31:25] Reserved + */ + PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000003, + PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, + + /* Config Base and Limit i Registers + * F1:0xE0 i = 0 + * F1:0xE4 i = 1 + * F1:0xE8 i = 2 + * F1:0xEC i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 2: 2] Device Number Compare Enable + * 0 = The ranges are based on bus number + * 1 = The ranges are ranges of devices on bus 0 + * [ 3: 3] Reserved + * [ 6: 4] Destination Node + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 7] Reserved + * [ 9: 8] Destination Link + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 - Reserved + * [15:10] Reserved + * [23:16] Bus Number Base i + * This field defines the lowest bus number in configuration region i + * [31:24] Bus Number Limit i + * This field defines the highest bus number in configuration regin i + */ + PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0xff000003, + PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, + }; + int max; + max = sizeof(register_values)/sizeof(register_values[0]); + setup_resource_map(register_values, max); +} + +static void sdram_set_registers(const struct mem_controller *ctrl) +{ + static const unsigned int register_values[] = { + + /* Careful set limit registers before base registers which contain the enables */ + /* DRAM Limit i Registers + * F1:0x44 i = 0 + * F1:0x4C i = 1 + * F1:0x54 i = 2 + * F1:0x5C i = 3 + * F1:0x64 i = 4 + * F1:0x6C i = 5 + * F1:0x74 i = 6 + * F1:0x7C i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 3] Reserved + * [10: 8] Interleave select + * specifies the values of A[14:12] to use with interleave enable. + * [15:11] Reserved + * [31:16] DRAM Limit Address i Bits 39-24 + * This field defines the upper address bits of a 40 bit address + * that define the end of the DRAM region. + */ + PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, + PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, + PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, + PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, + PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, + PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, + PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, + /* DRAM Base i Registers + * F1:0x40 i = 0 + * F1:0x48 i = 1 + * F1:0x50 i = 2 + * F1:0x58 i = 3 + * F1:0x60 i = 4 + * F1:0x68 i = 5 + * F1:0x70 i = 6 + * F1:0x78 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 7: 2] Reserved + * [10: 8] Interleave Enable + * 000 = No interleave + * 001 = Interleave on A[12] (2 nodes) + * 010 = reserved + * 011 = Interleave on A[12] and A[14] (4 nodes) + * 100 = reserved + * 101 = reserved + * 110 = reserved + * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) + * [15:11] Reserved + * [13:16] DRAM Base Address i Bits 39-24 + * This field defines the upper address bits of a 40-bit address + * that define the start of the DRAM region. + */ + PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, + + /* DRAM CS Base Address i Registers + * F2:0x40 i = 0 + * F2:0x44 i = 1 + * F2:0x48 i = 2 + * F2:0x4C i = 3 + * F2:0x50 i = 4 + * F2:0x54 i = 5 + * F2:0x58 i = 6 + * F2:0x5C i = 7 + * [ 0: 0] Chip-Select Bank Enable + * 0 = Bank Disabled + * 1 = Bank Enabled + * [ 8: 1] Reserved + * [15: 9] Base Address (19-13) + * An optimization used when all DIMM are the same size... + * [20:16] Reserved + * [31:21] Base Address (35-25) + * This field defines the top 11 addresses bit of a 40-bit + * address that define the memory address space. These + * bits decode 32-MByte blocks of memory. + */ + PCI_ADDR(0, 0x18, 2, 0x40), 0x001f01fe, 0x00000000, + PCI_ADDR(0, 0x18, 2, 0x44), 0x001f01fe, 0x00000000, + PCI_ADDR(0, 0x18, 2, 0x48), 0x001f01fe, 0x00000000, + PCI_ADDR(0, 0x18, 2, 0x4C), 0x001f01fe, 0x00000000, + PCI_ADDR(0, 0x18, 2, 0x50), 0x001f01fe, 0x00000000, + PCI_ADDR(0, 0x18, 2, 0x54), 0x001f01fe, 0x00000000, + PCI_ADDR(0, 0x18, 2, 0x58), 0x001f01fe, 0x00000000, + PCI_ADDR(0, 0x18, 2, 0x5C), 0x001f01fe, 0x00000000, + /* DRAM CS Mask Address i Registers + * F2:0x60 i = 0 + * F2:0x64 i = 1 + * F2:0x68 i = 2 + * F2:0x6C i = 3 + * F2:0x70 i = 4 + * F2:0x74 i = 5 + * F2:0x78 i = 6 + * F2:0x7C i = 7 + * Select bits to exclude from comparison with the DRAM Base address register. + * [ 8: 0] Reserved + * [15: 9] Address Mask (19-13) + * Address to be excluded from the optimized case + * [20:16] Reserved + * [29:21] Address Mask (33-25) + * The bits with an address mask of 1 are excluded from address comparison + * [31:30] Reserved + * + */ + PCI_ADDR(0, 0x18, 2, 0x60), 0xC01f01ff, 0x00000000, + PCI_ADDR(0, 0x18, 2, 0x64), 0xC01f01ff, 0x00000000, + PCI_ADDR(0, 0x18, 2, 0x68), 0xC01f01ff, 0x00000000, + PCI_ADDR(0, 0x18, 2, 0x6C), 0xC01f01ff, 0x00000000, + PCI_ADDR(0, 0x18, 2, 0x70), 0xC01f01ff, 0x00000000, + PCI_ADDR(0, 0x18, 2, 0x74), 0xC01f01ff, 0x00000000, + PCI_ADDR(0, 0x18, 2, 0x78), 0xC01f01ff, 0x00000000, + PCI_ADDR(0, 0x18, 2, 0x7C), 0xC01f01ff, 0x00000000, + /* DRAM Bank Address Mapping Register + * F2:0x80 + * Specify the memory module size + * [ 2: 0] CS1/0 + * [ 6: 4] CS3/2 + * [10: 8] CS5/4 + * [14:12] CS7/6 + * 000 = 32Mbyte (Rows = 12 & Col = 8) + * 001 = 64Mbyte (Rows = 12 & Col = 9) + * 010 = 128Mbyte (Rows = 13 & Col = 9)|(Rows = 12 & Col = 10) + * 011 = 256Mbyte (Rows = 13 & Col = 10)|(Rows = 12 & Col = 11) + * 100 = 512Mbyte (Rows = 13 & Col = 11)|(Rows = 14 & Col = 10) + * 101 = 1Gbyte (Rows = 14 & Col = 11)|(Rows = 13 & Col = 12) + * 110 = 2Gbyte (Rows = 14 & Col = 12) + * 111 = reserved + * [ 3: 3] Reserved + * [ 7: 7] Reserved + * [11:11] Reserved + * [31:15] + */ + PCI_ADDR(0, 0x18, 2, 0x80), 0xffff8888, 0x00000000, + /* DRAM Timing Low Register + * F2:0x88 + * [ 2: 0] Tcl (Cas# Latency, Cas# to read-data-valid) + * 000 = reserved + * 001 = CL 2 + * 010 = CL 3 + * 011 = reserved + * 100 = reserved + * 101 = CL 2.5 + * 110 = reserved + * 111 = reserved + * [ 3: 3] Reserved + * [ 7: 4] Trc (Row Cycle Time, Ras#-active to Ras#-active/bank auto refresh) + * 0000 = 7 bus clocks + * 0001 = 8 bus clocks + * ... + * 1110 = 21 bus clocks + * 1111 = 22 bus clocks + * [11: 8] Trfc (Row refresh Cycle time, Auto-refresh-active to RAS#-active or RAS#auto-refresh) + * 0000 = 9 bus clocks + * 0010 = 10 bus clocks + * .... + * 1110 = 23 bus clocks + * 1111 = 24 bus clocks + * [14:12] Trcd (Ras#-active to Case#-read/write Delay) + * 000 = reserved + * 001 = reserved + * 010 = 2 bus clocks + * 011 = 3 bus clocks + * 100 = 4 bus clocks + * 101 = 5 bus clocks + * 110 = 6 bus clocks + * 111 = reserved + * [15:15] Reserved + * [18:16] Trrd (Ras# to Ras# Delay) + * 000 = reserved + * 001 = reserved + * 010 = 2 bus clocks + * 011 = 3 bus clocks + * 100 = 4 bus clocks + * 101 = reserved + * 110 = reserved + * 111 = reserved + * [19:19] Reserved + * [23:20] Tras (Minmum Ras# Active Time) + * 0000 to 0100 = reserved + * 0101 = 5 bus clocks + * ... + * 1111 = 15 bus clocks + * [26:24] Trp (Row Precharge Time) + * 000 = reserved + * 001 = reserved + * 010 = 2 bus clocks + * 011 = 3 bus clocks + * 100 = 4 bus clocks + * 101 = 5 bus clocks + * 110 = 6 bus clocks + * 111 = reserved + * [27:27] Reserved + * [28:28] Twr (Write Recovery Time) + * 0 = 2 bus clocks + * 1 = 3 bus clocks + * [31:29] Reserved + */ + PCI_ADDR(0, 0x18, 2, 0x88), 0xe8088008, 0x02522001 /* 0x03623125 */ , + /* DRAM Timing High Register + * F2:0x8C + * [ 0: 0] Twtr (Write to Read Delay) + * 0 = 1 bus Clocks + * 1 = 2 bus Clocks + * [ 3: 1] Reserved + * [ 6: 4] Trwt (Read to Write Delay) + * 000 = 1 bus clocks + * 001 = 2 bus clocks + * 010 = 3 bus clocks + * 011 = 4 bus clocks + * 100 = 5 bus clocks + * 101 = 6 bus clocks + * 110 = reserved + * 111 = reserved + * [ 7: 7] Reserved + * [12: 8] Tref (Refresh Rate) + * 00000 = 100Mhz 4K rows + * 00001 = 133Mhz 4K rows + * 00010 = 166Mhz 4K rows + * 00011 = 200Mhz 4K rows + * 01000 = 100Mhz 8K/16K rows + * 01001 = 133Mhz 8K/16K rows + * 01010 = 166Mhz 8K/16K rows + * 01011 = 200Mhz 8K/16K rows + * [19:13] Reserved + * [22:20] Twcl (Write CAS Latency) + * 000 = 1 Mem clock after CAS# (Unbuffered Dimms) + * 001 = 2 Mem clocks after CAS# (Registered Dimms) + * [31:23] Reserved + */ + PCI_ADDR(0, 0x18, 2, 0x8c), 0xff8fe08e, (0 << 20)|(0 << 8)|(0 << 4)|(0 << 0), + /* DRAM Config Low Register + * F2:0x90 + * [ 0: 0] DLL Disable + * 0 = Enabled + * 1 = Disabled + * [ 1: 1] D_DRV + * 0 = Normal Drive + * 1 = Weak Drive + * [ 2: 2] QFC_EN + * 0 = Disabled + * 1 = Enabled + * [ 3: 3] Disable DQS Hystersis (FIXME handle this one carefully) + * 0 = Enable DQS input filter + * 1 = Disable DQS input filtering + * [ 7: 4] Reserved + * [ 8: 8] DRAM_Init + * 0 = Initialization done or not yet started. + * 1 = Initiate DRAM intialization sequence + * [ 9: 9] SO-Dimm Enable + * 0 = Do nothing + * 1 = SO-Dimms present + * [10:10] DramEnable + * 0 = DRAM not enabled + * 1 = DRAM initialized and enabled + * [11:11] Memory Clear Status + * 0 = Memory Clear function has not completed + * 1 = Memory Clear function has completed + * [12:12] Exit Self-Refresh + * 0 = Exit from self-refresh done or not yet started + * 1 = DRAM exiting from self refresh + * [13:13] Self-Refresh Status + * 0 = Normal Operation + * 1 = Self-refresh mode active + * [15:14] Read/Write Queue Bypass Count + * 00 = 2 + * 01 = 4 + * 10 = 8 + * 11 = 16 + * [16:16] 128-bit/64-Bit + * 0 = 64bit Interface to DRAM + * 1 = 128bit Interface to DRAM + * [17:17] DIMM ECC Enable + * 0 = Some DIMMs do not have ECC + * 1 = ALL DIMMS have ECC bits + * [18:18] UnBuffered DIMMs + * 0 = Buffered DIMMS + * 1 = Unbuffered DIMMS + * [19:19] Enable 32-Byte Granularity + * 0 = Optimize for 64byte bursts + * 1 = Optimize for 32byte bursts + * [20:20] DIMM 0 is x4 + * [21:21] DIMM 1 is x4 + * [22:22] DIMM 2 is x4 + * [23:23] DIMM 3 is x4 + * 0 = DIMM is not x4 + * 1 = x4 DIMM present + * [24:24] Disable DRAM Receivers + * 0 = Receivers enabled + * 1 = Receivers disabled + * [27:25] Bypass Max + * 000 = Arbiters chois is always respected + * 001 = Oldest entry in DCQ can be bypassed 1 time + * 010 = Oldest entry in DCQ can be bypassed 2 times + * 011 = Oldest entry in DCQ can be bypassed 3 times + * 100 = Oldest entry in DCQ can be bypassed 4 times + * 101 = Oldest entry in DCQ can be bypassed 5 times + * 110 = Oldest entry in DCQ can be bypassed 6 times + * 111 = Oldest entry in DCQ can be bypassed 7 times + * [31:28] Reserved + */ + PCI_ADDR(0, 0x18, 2, 0x90), 0xf0000000, + (4 << 25)|(0 << 24)| + (0 << 23)|(0 << 22)|(0 << 21)|(0 << 20)| + (1 << 19)|(0 << 18)|(1 << 17)|(0 << 16)| + (2 << 14)|(0 << 13)|(0 << 12)| + (0 << 11)|(0 << 10)|(0 << 9)|(0 << 8)| + (0 << 3) |(0 << 1) |(0 << 0), + /* DRAM Config High Register + * F2:0x94 + * [ 0: 3] Maximum Asynchronous Latency + * 0000 = 0 ns + * ... + * 1111 = 15 ns + * [ 7: 4] Reserved + * [11: 8] Read Preamble + * 0000 = 2.0 ns + * 0001 = 2.5 ns + * 0010 = 3.0 ns + * 0011 = 3.5 ns + * 0100 = 4.0 ns + * 0101 = 4.5 ns + * 0110 = 5.0 ns + * 0111 = 5.5 ns + * 1000 = 6.0 ns + * 1001 = 6.5 ns + * 1010 = 7.0 ns + * 1011 = 7.5 ns + * 1100 = 8.0 ns + * 1101 = 8.5 ns + * 1110 = 9.0 ns + * 1111 = 9.5 ns + * [15:12] Reserved + * [18:16] Idle Cycle Limit + * 000 = 0 cycles + * 001 = 4 cycles + * 010 = 8 cycles + * 011 = 16 cycles + * 100 = 32 cycles + * 101 = 64 cycles + * 110 = 128 cycles + * 111 = 256 cycles + * [19:19] Dynamic Idle Cycle Center Enable + * 0 = Use Idle Cycle Limit + * 1 = Generate a dynamic Idle cycle limit + * [22:20] DRAM MEMCLK Frequency + * 000 = 100Mhz + * 001 = reserved + * 010 = 133Mhz + * 011 = reserved + * 100 = reserved + * 101 = 166Mhz + * 110 = reserved + * 111 = reserved + * [24:23] Reserved + * [25:25] Memory Clock Ratio Valid (FIXME carefully enable memclk) + * 0 = Disable MemClks + * 1 = Enable MemClks + * [26:26] Memory Clock 0 Enable + * 0 = Disabled + * 1 = Enabled + * [27:27] Memory Clock 1 Enable + * 0 = Disabled + * 1 = Enabled + * [28:28] Memory Clock 2 Enable + * 0 = Disabled + * 1 = Enabled + * [29:29] Memory Clock 3 Enable + * 0 = Disabled + * 1 = Enabled + * [31:30] Reserved + */ + PCI_ADDR(0, 0x18, 2, 0x94), 0xc180f0f0, + (0 << 29)|(0 << 28)|(0 << 27)|(0 << 26)|(0 << 25)| + (0 << 20)|(0 << 19)|(DCH_IDLE_LIMIT_16 << 16)|(0 << 8)|(0 << 0), + /* DRAM Delay Line Register + * F2:0x98 + * Adjust the skew of the input DQS strobe relative to DATA + * [15: 0] Reserved + * [23:16] Delay Line Adjust + * Adjusts the DLL derived PDL delay by one or more delay stages + * in either the faster or slower direction. + * [24:24} Adjust Slower + * 0 = Do Nothing + * 1 = Adj is used to increase the PDL delay + * [25:25] Adjust Faster + * 0 = Do Nothing + * 1 = Adj is used to decrease the PDL delay + * [31:26] Reserved + */ + PCI_ADDR(0, 0x18, 2, 0x98), 0xfc00ffff, 0x00000000, + /* DRAM Scrub Control Register + * F3:0x58 + * [ 4: 0] DRAM Scrube Rate + * [ 7: 5] reserved + * [12: 8] L2 Scrub Rate + * [15:13] reserved + * [20:16] Dcache Scrub + * [31:21] reserved + * Scrub Rates + * 00000 = Do not scrub + * 00001 = 40.00 ns + * 00010 = 80.00 ns + * 00011 = 160.00 ns + * 00100 = 320.00 ns + * 00101 = 640.00 ns + * 00110 = 1.28 us + * 00111 = 2.56 us + * 01000 = 5.12 us + * 01001 = 10.20 us + * 01011 = 41.00 us + * 01100 = 81.90 us + * 01101 = 163.80 us + * 01110 = 327.70 us + * 01111 = 655.40 us + * 10000 = 1.31 ms + * 10001 = 2.62 ms + * 10010 = 5.24 ms + * 10011 = 10.49 ms + * 10100 = 20.97 ms + * 10101 = 42.00 ms + * 10110 = 84.00 ms + * All Others = Reserved + */ + PCI_ADDR(0, 0x18, 3, 0x58), 0xffe0e0e0, 0x00000000, + /* DRAM Scrub Address Low Register + * F3:0x5C + * [ 0: 0] DRAM Scrubber Redirect Enable + * 0 = Do nothing + * 1 = Scrubber Corrects errors found in normal operation + * [ 5: 1] Reserved + * [31: 6] DRAM Scrub Address 31-6 + */ + PCI_ADDR(0, 0x18, 3, 0x5C), 0x0000003e, 0x00000000, + /* DRAM Scrub Address High Register + * F3:0x60 + * [ 7: 0] DRAM Scrubb Address 39-32 + * [31: 8] Reserved + */ + PCI_ADDR(0, 0x18, 3, 0x60), 0xffffff00, 0x00000000, + +#if ENABLE_IOMMU != 0 + /* BY LYH add IOMMU 64M APERTURE */ + PCI_ADDR(0, 0x18, 3, 0x94), 0xffff8000, 0x00000f70, + PCI_ADDR(0, 0x18, 3, 0x90), 0xffffff80, 0x00000002, + PCI_ADDR(0, 0x18, 3, 0x98), 0x0000000f, 0x00068300, +#endif + }; + int i; + int max; + print_debug("setting up CPU"); + print_debug_hex8(ctrl->node_id); + print_debug(" northbridge registers\r\n"); + max = sizeof(register_values)/sizeof(register_values[0]); + for(i = 0; i < max; i += 3) { + device_t dev; + unsigned where; + unsigned long reg; +#if 0 + print_debug_hex32(register_values[i]); + print_debug(" <-"); + print_debug_hex32(register_values[i+2]); + print_debug("\r\n"); +#endif + dev = (register_values[i] & ~0xff) - PCI_DEV(0, 0x18, 0) + ctrl->f0; + where = register_values[i] & 0xff; + reg = pci_read_config32(dev, where); + reg &= register_values[i+1]; + reg |= register_values[i+2]; + pci_write_config32(dev, where, reg); +#if 0 + + reg = pci_read_config32(register_values[i]); + reg &= register_values[i+1]; + reg |= register_values[i+2]; + pci_write_config32(register_values[i], reg); +#endif + } + print_debug("done.\r\n"); +} + + +static int is_dual_channel(const struct mem_controller *ctrl) +{ + uint32_t dcl; + dcl = pci_read_config32(ctrl->f2, DRAM_CONFIG_LOW); + return dcl & DCL_128BitEn; +} + +static int is_opteron(const struct mem_controller *ctrl) +{ + /* Test to see if I am an Opteron. + * FIXME Testing dual channel capability is correct for now + * but a beter test is probably required. + */ +#warning "FIXME implement a better test for opterons" + uint32_t nbcap; + nbcap = pci_read_config32(ctrl->f3, NORTHBRIDGE_CAP); + return !!(nbcap & NBCAP_128Bit); +} + +static int is_registered(const struct mem_controller *ctrl) +{ + /* Test to see if we are dealing with registered SDRAM. + * If we are not registered we are unbuffered. + * This function must be called after spd_handle_unbuffered_dimms. + */ + uint32_t dcl; + dcl = pci_read_config32(ctrl->f2, DRAM_CONFIG_LOW); + return !(dcl & DCL_UnBufDimm); +} + +struct dimm_size { + unsigned long side1; + unsigned long side2; +}; + +static struct dimm_size spd_get_dimm_size(unsigned device) +{ + /* Calculate the log base 2 size of a DIMM in bits */ + struct dimm_size sz; + int value, low; + sz.side1 = 0; + sz.side2 = 0; + + /* Note it might be easier to use byte 31 here, it has the DIMM size as + * a multiple of 4MB. The way we do it now we can size both + * sides of an assymetric dimm. + */ + value = spd_read_byte(device, 3); /* rows */ + if (value < 0) goto out; + sz.side1 += value & 0xf; + + value = spd_read_byte(device, 4); /* columns */ + if (value < 0) goto out; + sz.side1 += value & 0xf; + + value = spd_read_byte(device, 17); /* banks */ + if (value < 0) goto out; + sz.side1 += log2(value & 0xff); + + /* Get the module data width and convert it to a power of two */ + value = spd_read_byte(device, 7); /* (high byte) */ + if (value < 0) goto out; + value &= 0xff; + value <<= 8; + + low = spd_read_byte(device, 6); /* (low byte) */ + if (low < 0) goto out; + value = value | (low & 0xff); + sz.side1 += log2(value); + + /* side 2 */ + value = spd_read_byte(device, 5); /* number of physical banks */ + if (value <= 1) goto out; + + /* Start with the symmetrical case */ + sz.side2 = sz.side1; + + value = spd_read_byte(device, 3); /* rows */ + if (value < 0) goto out; + if ((value & 0xf0) == 0) goto out; /* If symmetrical we are done */ + sz.side2 -= (value & 0x0f); /* Subtract out rows on side 1 */ + sz.side2 += ((value >> 4) & 0x0f); /* Add in rows on side 2 */ + + value = spd_read_byte(device, 4); /* columns */ + if (value < 0) goto out; + sz.side2 -= (value & 0x0f); /* Subtract out columns on side 1 */ + sz.side2 += ((value >> 4) & 0x0f); /* Add in columsn on side 2 */ + + out: + return sz; +} + +static void set_dimm_size(const struct mem_controller *ctrl, struct dimm_size sz, unsigned index) +{ + uint32_t base0, base1, map; + uint32_t dch; + +#if 0 + print_debug("set_dimm_size: ("); + print_debug_hex32(sz.side1); + print_debug_char(','); + print_debug_hex32(sz.side2); + print_debug_char(','); + print_debug_hex32(index); + print_debug(")\r\n"); +#endif + if (sz.side1 != sz.side2) { + sz.side2 = 0; + } + map = pci_read_config32(ctrl->f2, DRAM_BANK_ADDR_MAP); + map &= ~(0xf << (index + 4)); + + /* For each base register. + * Place the dimm size in 32 MB quantities in the bits 31 - 21. + * The initialize dimm size is in bits. + * Set the base enable bit0. + */ + + base0 = base1 = 0; + + /* Make certain side1 of the dimm is at least 32MB */ + if (sz.side1 >= (25 +3)) { + map |= (sz.side1 - (25 + 3)) << (index *4); + base0 = (1 << ((sz.side1 - (25 + 3)) + 21)) | 1; + } + /* Make certain side2 of the dimm is at least 32MB */ + if (sz.side2 >= (25 + 3)) { + base1 = (1 << ((sz.side2 - (25 + 3)) + 21)) | 1; + } + + /* Double the size if we are using dual channel memory */ + if (is_dual_channel(ctrl)) { + base0 = (base0 << 1) | (base0 & 1); + base1 = (base1 << 1) | (base1 & 1); + } + + /* Clear the reserved bits */ + base0 &= ~0x001ffffe; + base1 &= ~0x001ffffe; + + /* Set the appropriate DIMM base address register */ + pci_write_config32(ctrl->f2, DRAM_CSBASE + (((index << 1)+0)<<2), base0); + pci_write_config32(ctrl->f2, DRAM_CSBASE + (((index << 1)+1)<<2), base1); + pci_write_config32(ctrl->f2, DRAM_BANK_ADDR_MAP, map); + + /* Enable the memory clocks for this DIMM */ + if (base0) { + dch = pci_read_config32(ctrl->f2, DRAM_CONFIG_HIGH); + dch |= DCH_MEMCLK_EN0 << index; + pci_write_config32(ctrl->f2, DRAM_CONFIG_HIGH, dch); + } +} + +static void spd_set_ram_size(const struct mem_controller *ctrl) +{ + int i; + + for(i = 0; (i < 4) && (ctrl->channel0[i]); i++) { + struct dimm_size sz; + sz = spd_get_dimm_size(ctrl->channel0[i]); + set_dimm_size(ctrl, sz, i); + } +} + +//BY LYH //Fill next base reg with right value +static void fill_last(unsigned long node_id,unsigned long base) +{ + unsigned i; + unsigned base_reg; + base &=0xffff0000; + device_t device; + for(device = PCI_DEV(0, 0x18, 1); device <= PCI_DEV(0, 0x1f, 1); device ++= PCI_DEV(0, 1, 0)) { + for(i=node_id+1;i<=7;i++) { + base_reg=0x40+(i<<3); + pci_write_config32(device,base_reg,base); + } + } +} +//BY LYH END + +static void route_dram_accesses(const struct mem_controller *ctrl, + unsigned long base_k, unsigned long limit_k) +{ + /* Route the addresses to the controller node */ + unsigned node_id; + unsigned limit; + unsigned base; + unsigned index; + unsigned limit_reg, base_reg; + device_t device; + + node_id = ctrl->node_id; + index = (node_id << 3); + limit = (limit_k << 2); + limit &= 0xffff0000; + limit -= 0x00010000; + limit |= ( 0 << 8) | (node_id << 0); + base = (base_k << 2); + base &= 0xffff0000; + base |= (0 << 8) | (1<<1) | (1<<0); + + limit_reg = 0x44 + index; + base_reg = 0x40 + index; + for(device = PCI_DEV(0, 0x18, 1); device <= PCI_DEV(0, 0x1f, 1); device += PCI_DEV(0, 1, 0)) { + pci_write_config32(device, limit_reg, limit); + pci_write_config32(device, base_reg, base); + } +} + +static void set_top_mem(unsigned tom_k) +{ + /* Error if I don't have memory */ + if (!tom_k) { + die("No memory"); + } + +#if 1 + /* Report the amount of memory. */ + print_debug("RAM: 0x"); + print_debug_hex32(tom_k); + print_debug(" KB\r\n"); +#endif + + /* Now set top of memory */ + msr_t msr; + msr.lo = (tom_k & 0x003fffff) << 10; + msr.hi = (tom_k & 0xffc00000) >> 22; + wrmsr(TOP_MEM2, msr); + + /* Leave a 64M hole between TOP_MEM and TOP_MEM2 + * so I can see my rom chip and other I/O devices. + */ + if (tom_k >= 0x003f0000) { + tom_k = 0x3f0000; + } + msr.lo = (tom_k & 0x003fffff) << 10; + msr.hi = (tom_k & 0xffc00000) >> 22; + wrmsr(TOP_MEM, msr); +} + +static void order_dimms(const struct mem_controller *ctrl) +{ + unsigned long tom, tom_k, base_k; + unsigned node_id; + + /* Compute the memory base address address */ + base_k = 0; + /* Remember which registers we have used in the high 8 bits of tom */ + tom = base_k >> 15; + for(;;) { + /* Find the largest remaining canidate */ + unsigned index, canidate; + uint32_t csbase, csmask; + unsigned size; + csbase = 0; + canidate = 0; + for(index = 0; index < 8; index++) { + uint32_t value; + value = pci_read_config32(ctrl->f2, DRAM_CSBASE + (index << 2)); + + /* Is it enabled? */ + if (!(value & 1)) { + continue; + } + + /* Is it greater? */ + if (value <= csbase) { + continue; + } + + /* Has it already been selected */ + if (tom & (1 << (index + 24))) { + continue; + } + /* I have a new canidate */ + csbase = value; + canidate = index; + } + /* See if I have found a new canidate */ + if (csbase == 0) { + break; + } + + /* Remember the dimm size */ + size = csbase >> 21; + + /* Remember I have used this register */ + tom |= (1 << (canidate + 24)); + + /* Recompute the cs base register value */ + csbase = (tom << 21) | 1; + + /* Increment the top of memory */ + tom += size; + + /* Compute the memory mask */ + csmask = ((size -1) << 21); + csmask |= 0xfe00; /* For now don't optimize */ +#warning "Don't forget to optimize the DIMM size" + + /* Write the new base register */ + pci_write_config32(ctrl->f2, DRAM_CSBASE + (canidate << 2), csbase); + /* Write the new mask register */ + pci_write_config32(ctrl->f2, DRAM_CSMASK + (canidate << 2), csmask); + + } + tom_k = (tom & ~0xff000000) << 15; + + /* Compute the memory base address */ + base_k = 0; + for(node_id = 0; node_id < ctrl->node_id; node_id++) { + uint32_t limit, base; + unsigned index; + index = node_id << 3; + base = pci_read_config32(ctrl->f1, 0x40 + index); + /* Only look at the limit if the base is enabled */ + if ((base & 3) == 3) { + limit = pci_read_config32(ctrl->f1, 0x44 + index); + base_k = ((limit + 0x00010000) & 0xffff0000) >> 2; + } + } + tom_k += base_k; +#if 0 + print_debug("tom: "); + print_debug_hex32(tom); + print_debug(" base_k: "); + print_debug_hex32(base_k); + print_debug(" tom_k: "); + print_debug_hex32(tom_k); + print_debug("\r\n"); +#endif + route_dram_accesses(ctrl, base_k, tom_k); +//BY LYH + fill_last(ctrl->node_id, tom_k<<2); +//BY LYH END + set_top_mem(tom_k); +} + +static void disable_dimm(const struct mem_controller *ctrl, unsigned index) +{ + print_debug("disabling dimm"); + print_debug_hex8(index); + print_debug("\r\n"); + pci_write_config32(ctrl->f2, DRAM_CSBASE + (((index << 1)+0)<<2), 0); + pci_write_config32(ctrl->f2, DRAM_CSBASE + (((index << 1)+1)<<2), 0); +} + + +static void spd_handle_unbuffered_dimms(const struct mem_controller *ctrl) +{ + int i; + int registered; + int unbuffered; + uint32_t dcl; + unbuffered = 0; + registered = 0; + for(i = 0; (i < 4) && (ctrl->channel0[i]); i++) { + int value; + value = spd_read_byte(ctrl->channel0[i], 21); + if (value < 0) { + disable_dimm(ctrl, i); + continue; + } + /* Registered dimm ? */ + if (value & (1 << 1)) { + registered = 1; + } + /* Otherwise it must be an unbuffered dimm */ + else { + unbuffered = 1; + } + } + if (unbuffered && registered) { + die("Mixed buffered and registered dimms not supported"); + } + if (unbuffered && is_opteron(ctrl)) { + die("Unbuffered Dimms not supported on Opteron"); + } + + dcl = pci_read_config32(ctrl->f2, DRAM_CONFIG_LOW); + dcl &= ~DCL_UnBufDimm; + if (unbuffered) { + dcl |= DCL_UnBufDimm; + } + pci_write_config32(ctrl->f2, DRAM_CONFIG_LOW, dcl); +#if 0 + if (is_registered(ctrl)) { + print_debug("Registered\r\n"); + } else { + print_debug("Unbuffered\r\n"); + } +#endif +} + +static void spd_enable_2channels(const struct mem_controller *ctrl) +{ + int i; + uint32_t nbcap; + /* SPD addresses to verify are identical */ +#warning "FINISHME review and see if these are the bytes I need" + /* FINISHME review and see if these are the bytes I need */ + static const unsigned addresses[] = { + 2, /* Type should be DDR SDRAM */ + 3, /* *Row addresses */ + 4, /* *Column addresses */ + 5, /* *Physical Banks */ + 6, /* *Module Data Width low */ + 7, /* *Module Data Width high */ + 9, /* *Cycle time at highest CAS Latency CL=X */ + 11, /* *SDRAM Type */ + 13, /* *SDRAM Width */ + 17, /* *Logical Banks */ + 18, /* *Supported CAS Latencies */ + 21, /* *SDRAM Module Attributes */ + 23, /* *Cycle time at CAS Latnecy (CLX - 0.5) */ + 26, /* *Cycle time at CAS Latnecy (CLX - 1.0) */ + 27, /* *tRP Row precharge time */ + 28, /* *Minimum Row Active to Row Active Delay (tRRD) */ + 29, /* *tRCD RAS to CAS */ + 30, /* *tRAS Activate to Precharge */ + 41, /* *Minimum Active to Active/Auto Refresh Time(Trc) */ + 42, /* *Minimum Auto Refresh Command Time(Trfc) */ + }; + nbcap = pci_read_config32(ctrl->f3, NORTHBRIDGE_CAP); + if (!(nbcap & NBCAP_128Bit)) { + return; + } + for(i = 0; (i < 4) && (ctrl->channel0[i]); i++) { + unsigned device0, device1; + int value0, value1; + int j; + device0 = ctrl->channel0[i]; + device1 = ctrl->channel1[i]; + if (!device1) + return; + for(j = 0; j < sizeof(addresses)/sizeof(addresses[0]); j++) { + unsigned addr; + addr = addresses[j]; + value0 = spd_read_byte(device0, addr); + if (value0 < 0) { + break; + } + value1 = spd_read_byte(device1, addr); + if (value1 < 0) { + return; + } + if (value0 != value1) { + return; + } + } + } + print_debug("Enabling dual channel memory\r\n"); + uint32_t dcl; + dcl = pci_read_config32(ctrl->f2, DRAM_CONFIG_LOW); + dcl &= ~DCL_32ByteEn; + dcl |= DCL_128BitEn; + pci_write_config32(ctrl->f2, DRAM_CONFIG_LOW, dcl); +} + +struct mem_param { + uint8_t cycle_time; + uint8_t divisor; /* In 1/2 ns increments */ + uint8_t tRC; + uint8_t tRFC; + uint32_t dch_memclk; + uint16_t dch_tref4k, dch_tref8k; + uint8_t dtl_twr; + char name[9]; +}; + +static const struct mem_param *get_mem_param(unsigned min_cycle_time) +{ + static const struct mem_param speed[] = { + { + .name = "100Mhz\r\n", + .cycle_time = 0xa0, + .divisor = (10 <<1), + .tRC = 0x46, + .tRFC = 0x50, + .dch_memclk = DCH_MEMCLK_100MHZ << DCH_MEMCLK_SHIFT, + .dch_tref4k = DTH_TREF_100MHZ_4K, + .dch_tref8k = DTH_TREF_100MHZ_8K, + .dtl_twr = 2, + }, + { + .name = "133Mhz\r\n", + .cycle_time = 0x75, + .divisor = (7<<1)+1, + .tRC = 0x41, + .tRFC = 0x4B, + .dch_memclk = DCH_MEMCLK_133MHZ << DCH_MEMCLK_SHIFT, + .dch_tref4k = DTH_TREF_133MHZ_4K, + .dch_tref8k = DTH_TREF_133MHZ_8K, + .dtl_twr = 2, + }, + { + .name = "166Mhz\r\n", + .cycle_time = 0x60, + .divisor = (6<<1), + .tRC = 0x3C, + .tRFC = 0x48, + .dch_memclk = DCH_MEMCLK_166MHZ << DCH_MEMCLK_SHIFT, + .dch_tref4k = DTH_TREF_166MHZ_4K, + .dch_tref8k = DTH_TREF_166MHZ_8K, + .dtl_twr = 3, + }, + { + .name = "200Mhz\r\n", + .cycle_time = 0x50, + .divisor = (5<<1), + .tRC = 0x37, + .tRFC = 0x46, + .dch_memclk = DCH_MEMCLK_200MHZ << DCH_MEMCLK_SHIFT, + .dch_tref4k = DTH_TREF_200MHZ_4K, + .dch_tref8k = DTH_TREF_200MHZ_8K, + .dtl_twr = 3, + }, + { + .cycle_time = 0x00, + }, + }; + const struct mem_param *param; + for(param = &speed[0]; param->cycle_time ; param++) { + if (min_cycle_time > (param+1)->cycle_time) { + break; + } + } + if (!param->cycle_time) { + die("min_cycle_time to low"); + } +#if 1 + print_debug(param->name); +#endif + return param; +} + +static const struct mem_param *spd_set_memclk(const struct mem_controller *ctrl) +{ + /* Compute the minimum cycle time for these dimms */ + const struct mem_param *param; + unsigned min_cycle_time, min_latency; + int i; + uint32_t value; + + static const int latency_indicies[] = { 26, 23, 9 }; + static const unsigned char min_cycle_times[] = { + [NBCAP_MEMCLK_200MHZ] = 0x50, /* 5ns */ + [NBCAP_MEMCLK_166MHZ] = 0x60, /* 6ns */ + [NBCAP_MEMCLK_133MHZ] = 0x75, /* 7.5ns */ + [NBCAP_MEMCLK_100MHZ] = 0xa0, /* 10ns */ + }; + + + value = pci_read_config32(ctrl->f3, NORTHBRIDGE_CAP); + min_cycle_time = min_cycle_times[(value >> NBCAP_MEMCLK_SHIFT) & NBCAP_MEMCLK_MASK]; + min_latency = 2; + +#if 0 + print_debug("min_cycle_time: "); + print_debug_hex8(min_cycle_time); + print_debug(" min_latency: "); + print_debug_hex8(min_latency); + print_debug("\r\n"); +#endif + + /* Compute the least latency with the fastest clock supported + * by both the memory controller and the dimms. + */ + for(i = 0; (i < 4) && (ctrl->channel0[i]); i++) { + int new_cycle_time, new_latency; + int index; + int latencies; + int latency; + + /* First find the supported CAS latencies + * Byte 18 for DDR SDRAM is interpreted: + * bit 0 == CAS Latency = 1.0 + * bit 1 == CAS Latency = 1.5 + * bit 2 == CAS Latency = 2.0 + * bit 3 == CAS Latency = 2.5 + * bit 4 == CAS Latency = 3.0 + * bit 5 == CAS Latency = 3.5 + * bit 6 == TBD + * bit 7 == TBD + */ + new_cycle_time = 0xa0; + new_latency = 5; + + latencies = spd_read_byte(ctrl->channel0[i], 18); + if (latencies <= 0) continue; + + /* Compute the lowest cas latency supported */ + latency = log2(latencies) -2; + + /* Loop through and find a fast clock with a low latency */ + for(index = 0; index < 3; index++, latency++) { + int value; + if ((latency < 2) || (latency > 4) || + (!(latencies & (1 << latency)))) { + continue; + } + value = spd_read_byte(ctrl->channel0[i], latency_indicies[index]); + if (value < 0) { + continue; + } + + /* Only increase the latency if we decreas the clock */ + if ((value >= min_cycle_time) && (value < new_cycle_time)) { + new_cycle_time = value; + new_latency = latency; + } + } + if (new_latency > 4){ + continue; + } + /* Does min_latency need to be increased? */ + if (new_cycle_time > min_cycle_time) { + min_cycle_time = new_cycle_time; + } + /* Does min_cycle_time need to be increased? */ + if (new_latency > min_latency) { + min_latency = new_latency; + } +#if 0 + print_debug("i: "); + print_debug_hex8(i); + print_debug(" min_cycle_time: "); + print_debug_hex8(min_cycle_time); + print_debug(" min_latency: "); + print_debug_hex8(min_latency); + print_debug("\r\n"); +#endif + } + /* Make a second pass through the dimms and disable + * any that cannot support the selected memclk and cas latency. + */ + + for(i = 0; (i < 4) && (ctrl->channel0[i]); i++) { + int latencies; + int latency; + int index; + int value; + int dimm; + latencies = spd_read_byte(ctrl->channel0[i], 18); + if (latencies <= 0) { + goto dimm_err; + } + + /* Compute the lowest cas latency supported */ + latency = log2(latencies) -2; + + /* Walk through searching for the selected latency */ + for(index = 0; index < 3; index++, latency++) { + if (!(latencies & (1 << latency))) { + continue; + } + if (latency == min_latency) + break; + } + /* If I can't find the latency or my index is bad error */ + if ((latency != min_latency) || (index >= 3)) { + goto dimm_err; + } + + /* Read the min_cycle_time for this latency */ + value = spd_read_byte(ctrl->channel0[i], latency_indicies[index]); + + /* All is good if the selected clock speed + * is what I need or slower. + */ + if (value <= min_cycle_time) { + continue; + } + /* Otherwise I have an error, disable the dimm */ + dimm_err: + disable_dimm(ctrl, i); + } +#if 0 + print_debug("min_cycle_time: "); + print_debug_hex8(min_cycle_time); + print_debug(" min_latency: "); + print_debug_hex8(min_latency); + print_debug("\r\n"); +#endif + /* Now that I know the minimum cycle time lookup the memory parameters */ + param = get_mem_param(min_cycle_time); + + /* Update DRAM Config High with our selected memory speed */ + value = pci_read_config32(ctrl->f2, DRAM_CONFIG_HIGH); + value &= ~(DCH_MEMCLK_MASK << DCH_MEMCLK_SHIFT); + value |= param->dch_memclk; + pci_write_config32(ctrl->f2, DRAM_CONFIG_HIGH, value); + + static const unsigned latencies[] = { DTL_CL_2, DTL_CL_2_5, DTL_CL_3 }; + /* Update DRAM Timing Low with our selected cas latency */ + value = pci_read_config32(ctrl->f2, DRAM_TIMING_LOW); + value &= ~(DTL_TCL_MASK << DTL_TCL_SHIFT); + value |= latencies[min_latency - 2] << DTL_TCL_SHIFT; + pci_write_config32(ctrl->f2, DRAM_TIMING_LOW, value); + + return param; +} + + +static int update_dimm_Trc(const struct mem_controller *ctrl, const struct mem_param *param, int i) +{ + unsigned clocks, old_clocks; + uint32_t dtl; + int value; + value = spd_read_byte(ctrl->channel0[i], 41); + if (value < 0) return -1; + if ((value == 0) || (value == 0xff)) { + value = param->tRC; + } + clocks = ((value << 1) + param->divisor - 1)/param->divisor; + if (clocks < DTL_TRC_MIN) { + clocks = DTL_TRC_MIN; + } + if (clocks > DTL_TRC_MAX) { + return -1; + } + + dtl = pci_read_config32(ctrl->f2, DRAM_TIMING_LOW); + old_clocks = ((dtl >> DTL_TRC_SHIFT) & DTL_TRC_MASK) + DTL_TRC_BASE; + if (old_clocks > clocks) { + clocks = old_clocks; + } + dtl &= ~(DTL_TRC_MASK << DTL_TRC_SHIFT); + dtl |= ((clocks - DTL_TRC_BASE) << DTL_TRC_SHIFT); + pci_write_config32(ctrl->f2, DRAM_TIMING_LOW, dtl); + return 0; +} + +static int update_dimm_Trfc(const struct mem_controller *ctrl, const struct mem_param *param, int i) +{ + unsigned clocks, old_clocks; + uint32_t dtl; + int value; + value = spd_read_byte(ctrl->channel0[i], 42); + if (value < 0) return -1; + if ((value == 0) || (value == 0xff)) { + value = param->tRFC; + } + clocks = ((value << 1) + param->divisor - 1)/param->divisor; + if (clocks < DTL_TRFC_MIN) { + clocks = DTL_TRFC_MIN; + } + if (clocks > DTL_TRFC_MAX) { + return -1; + } + dtl = pci_read_config32(ctrl->f2, DRAM_TIMING_LOW); + old_clocks = ((dtl >> DTL_TRFC_SHIFT) & DTL_TRFC_MASK) + DTL_TRFC_BASE; + if (old_clocks > clocks) { + clocks = old_clocks; + } + dtl &= ~(DTL_TRFC_MASK << DTL_TRFC_SHIFT); + dtl |= ((clocks - DTL_TRFC_BASE) << DTL_TRFC_SHIFT); + pci_write_config32(ctrl->f2, DRAM_TIMING_LOW, dtl); + return 0; +} + + +static int update_dimm_Trcd(const struct mem_controller *ctrl, const struct mem_param *param, int i) +{ + unsigned clocks, old_clocks; + uint32_t dtl; + int value; + value = spd_read_byte(ctrl->channel0[i], 29); + if (value < 0) return -1; +#if 0 + clocks = (value + (param->divisor << 1) -1)/(param->divisor << 1); +#else + clocks = (value + ((param->divisor & 0xff) << 1) -1)/((param->divisor & 0xff) << 1); +#endif + if (clocks < DTL_TRCD_MIN) { + clocks = DTL_TRCD_MIN; + } + if (clocks > DTL_TRCD_MAX) { + return -1; + } + dtl = pci_read_config32(ctrl->f2, DRAM_TIMING_LOW); + old_clocks = ((dtl >> DTL_TRCD_SHIFT) & DTL_TRCD_MASK) + DTL_TRCD_BASE; + if (old_clocks > clocks) { + clocks = old_clocks; + } + dtl &= ~(DTL_TRCD_MASK << DTL_TRCD_SHIFT); + dtl |= ((clocks - DTL_TRCD_BASE) << DTL_TRCD_SHIFT); + pci_write_config32(ctrl->f2, DRAM_TIMING_LOW, dtl); + return 0; +} + +static int update_dimm_Trrd(const struct mem_controller *ctrl, const struct mem_param *param, int i) +{ + unsigned clocks, old_clocks; + uint32_t dtl; + int value; + value = spd_read_byte(ctrl->channel0[i], 28); + if (value < 0) return -1; + clocks = (value + ((param->divisor & 0xff) << 1) -1)/((param->divisor & 0xff) << 1); + if (clocks < DTL_TRRD_MIN) { + clocks = DTL_TRRD_MIN; + } + if (clocks > DTL_TRRD_MAX) { + return -1; + } + dtl = pci_read_config32(ctrl->f2, DRAM_TIMING_LOW); + old_clocks = ((dtl >> DTL_TRRD_SHIFT) & DTL_TRRD_MASK) + DTL_TRRD_BASE; + if (old_clocks > clocks) { + clocks = old_clocks; + } + dtl &= ~(DTL_TRRD_MASK << DTL_TRRD_SHIFT); + dtl |= ((clocks - DTL_TRRD_BASE) << DTL_TRRD_SHIFT); + pci_write_config32(ctrl->f2, DRAM_TIMING_LOW, dtl); + return 0; +} + +static int update_dimm_Tras(const struct mem_controller *ctrl, const struct mem_param *param, int i) +{ + unsigned clocks, old_clocks; + uint32_t dtl; + int value; + value = spd_read_byte(ctrl->channel0[i], 30); + if (value < 0) return -1; + clocks = ((value << 1) + param->divisor - 1)/param->divisor; + if (clocks < DTL_TRAS_MIN) { + clocks = DTL_TRAS_MIN; + } + if (clocks > DTL_TRAS_MAX) { + return -1; + } + dtl = pci_read_config32(ctrl->f2, DRAM_TIMING_LOW); + old_clocks = ((dtl >> DTL_TRAS_SHIFT) & DTL_TRAS_MASK) + DTL_TRAS_BASE; + if (old_clocks > clocks) { + clocks = old_clocks; + } + dtl &= ~(DTL_TRAS_MASK << DTL_TRAS_SHIFT); + dtl |= ((clocks - DTL_TRAS_BASE) << DTL_TRAS_SHIFT); + pci_write_config32(ctrl->f2, DRAM_TIMING_LOW, dtl); + return 0; +} + +static int update_dimm_Trp(const struct mem_controller *ctrl, const struct mem_param *param, int i) +{ + unsigned clocks, old_clocks; + uint32_t dtl; + int value; + value = spd_read_byte(ctrl->channel0[i], 27); + if (value < 0) return -1; +#if 0 + clocks = (value + (param->divisor << 1) - 1)/(param->divisor << 1); +#else + clocks = (value + ((param->divisor & 0xff) << 1) - 1)/((param->divisor & 0xff) << 1); +#endif +#if 0 + print_debug("Trp: "); + print_debug_hex8(clocks); + print_debug(" spd value: "); + print_debug_hex8(value); + print_debug(" divisor: "); + print_debug_hex8(param->divisor); + print_debug("\r\n"); +#endif + if (clocks < DTL_TRP_MIN) { + clocks = DTL_TRP_MIN; + } + if (clocks > DTL_TRP_MAX) { + return -1; + } + dtl = pci_read_config32(ctrl->f2, DRAM_TIMING_LOW); + old_clocks = ((dtl >> DTL_TRP_SHIFT) & DTL_TRP_MASK) + DTL_TRP_BASE; + if (old_clocks > clocks) { + clocks = old_clocks; + } + dtl &= ~(DTL_TRP_MASK << DTL_TRP_SHIFT); + dtl |= ((clocks - DTL_TRP_BASE) << DTL_TRP_SHIFT); + pci_write_config32(ctrl->f2, DRAM_TIMING_LOW, dtl); + return 0; +} + +static void set_Twr(const struct mem_controller *ctrl, const struct mem_param *param) +{ + uint32_t dtl; + dtl = pci_read_config32(ctrl->f2, DRAM_TIMING_LOW); + dtl &= ~(DTL_TWR_MASK << DTL_TWR_SHIFT); + dtl |= (param->dtl_twr - DTL_TWR_BASE) << DTL_TWR_SHIFT; + pci_write_config32(ctrl->f2, DRAM_TIMING_LOW, dtl); +} + + +static void init_Tref(const struct mem_controller *ctrl, const struct mem_param *param) +{ + uint32_t dth; + dth = pci_read_config32(ctrl->f2, DRAM_TIMING_HIGH); + dth &= ~(DTH_TREF_MASK << DTH_TREF_SHIFT); + dth |= (param->dch_tref4k << DTH_TREF_SHIFT); + pci_write_config32(ctrl->f2, DRAM_TIMING_HIGH, dth); +} + +static int update_dimm_Tref(const struct mem_controller *ctrl, const struct mem_param *param, int i) +{ + uint32_t dth; + int value; + unsigned tref, old_tref; + value = spd_read_byte(ctrl->channel0[i], 3); + if (value < 0) return -1; + value &= 0xf; + + tref = param->dch_tref8k; + if (value == 12) { + tref = param->dch_tref4k; + } + + dth = pci_read_config32(ctrl->f2, DRAM_TIMING_HIGH); + old_tref = (dth >> DTH_TREF_SHIFT) & DTH_TREF_MASK; + if ((value == 12) && (old_tref == param->dch_tref4k)) { + tref = param->dch_tref4k; + } else { + tref = param->dch_tref8k; + } + dth &= ~(DTH_TREF_MASK << DTH_TREF_SHIFT); + dth |= (tref << DTH_TREF_SHIFT); + pci_write_config32(ctrl->f2, DRAM_TIMING_HIGH, dth); + return 0; +} + + +static int update_dimm_x4(const struct mem_controller *ctrl, const struct mem_param *param, int i) +{ + uint32_t dcl; + int value; + int dimm; + value = spd_read_byte(ctrl->channel0[i], 13); + if (value < 0) { + return -1; + } + dimm = i; + dimm += DCL_x4DIMM_SHIFT; + dcl = pci_read_config32(ctrl->f2, DRAM_CONFIG_LOW); + dcl &= ~(1 << dimm); + if (value == 4) { + dcl |= (1 << dimm); + } + pci_write_config32(ctrl->f2, DRAM_CONFIG_LOW, dcl); + return 0; +} + +static int update_dimm_ecc(const struct mem_controller *ctrl, const struct mem_param *param, int i) +{ + uint32_t dcl; + int value; + value = spd_read_byte(ctrl->channel0[i], 11); + if (value < 0) { + return -1; + } + if (value != 2) { + dcl = pci_read_config32(ctrl->f2, DRAM_CONFIG_LOW); + dcl &= ~DCL_DimmEccEn; + pci_write_config32(ctrl->f2, DRAM_CONFIG_LOW, dcl); + } + return 0; +} + +static int count_dimms(const struct mem_controller *ctrl) +{ + int dimms; + unsigned index; + dimms = 0; + for(index = 0; index < 8; index += 2) { + uint32_t csbase; + csbase = pci_read_config32(ctrl->f2, (DRAM_CSBASE + index << 2)); + if (csbase & 1) { + dimms += 1; + } + } + return dimms; +} + +static void set_Twtr(const struct mem_controller *ctrl, const struct mem_param *param) +{ + uint32_t dth; + unsigned clocks; + clocks = 1; /* AMD says hard code this */ + dth = pci_read_config32(ctrl->f2, DRAM_TIMING_HIGH); + dth &= ~(DTH_TWTR_MASK << DTH_TWTR_SHIFT); + dth |= ((clocks - DTH_TWTR_BASE) << DTH_TWTR_SHIFT); + pci_write_config32(ctrl->f2, DRAM_TIMING_HIGH, dth); +} + +static void set_Trwt(const struct mem_controller *ctrl, const struct mem_param *param) +{ + uint32_t dth, dtl; + unsigned divisor; + unsigned latency; + unsigned clocks; + + clocks = 0; + dtl = pci_read_config32(ctrl->f2, DRAM_TIMING_LOW); + latency = (dtl >> DTL_TCL_SHIFT) & DTL_TCL_MASK; + divisor = param->divisor; + + if (is_opteron(ctrl)) { + if (latency == DTL_CL_2) { + if (divisor == ((6 << 0) + 0)) { + /* 166Mhz */ + clocks = 3; + } + else if (divisor > ((6 << 0)+0)) { + /* 100Mhz && 133Mhz */ + clocks = 2; + } + } + else if (latency == DTL_CL_2_5) { + clocks = 3; + } + else if (latency == DTL_CL_3) { + if (divisor == ((6 << 0)+0)) { + /* 166Mhz */ + clocks = 4; + } + else if (divisor > ((6 << 0)+0)) { + /* 100Mhz && 133Mhz */ + clocks = 3; + } + } + } + else /* Athlon64 */ { + if (is_registered(ctrl)) { + if (latency == DTL_CL_2) { + clocks = 2; + } + else if (latency == DTL_CL_2_5) { + clocks = 3; + } + else if (latency == DTL_CL_3) { + clocks = 3; + } + } + else /* Unbuffered */{ + if (latency == DTL_CL_2) { + clocks = 3; + } + else if (latency == DTL_CL_2_5) { + clocks = 4; + } + else if (latency == DTL_CL_3) { + clocks = 4; + } + } + } + if ((clocks < DTH_TRWT_MIN) || (clocks > DTH_TRWT_MAX)) { + die("Unknown Trwt"); + } + + dth = pci_read_config32(ctrl->f2, DRAM_TIMING_HIGH); + dth &= ~(DTH_TRWT_MASK << DTH_TRWT_SHIFT); + dth |= ((clocks - DTH_TRWT_BASE) << DTH_TRWT_SHIFT); + pci_write_config32(ctrl->f2, DRAM_TIMING_HIGH, dth); + return; +} + +static void set_Twcl(const struct mem_controller *ctrl, const struct mem_param *param) +{ + /* Memory Clocks after CAS# */ + uint32_t dth; + unsigned clocks; + if (is_registered(ctrl)) { + clocks = 2; + } else { + clocks = 1; + } + dth = pci_read_config32(ctrl->f2, DRAM_TIMING_HIGH); + dth &= ~(DTH_TWCL_MASK << DTH_TWCL_SHIFT); + dth |= ((clocks - DTH_TWCL_BASE) << DTH_TWCL_SHIFT); + pci_write_config32(ctrl->f2, DRAM_TIMING_HIGH, dth); +} + + +static void set_read_preamble(const struct mem_controller *ctrl, const struct mem_param *param) +{ + uint32_t dch; + unsigned divisor; + unsigned rdpreamble; + divisor = param->divisor; + dch = pci_read_config32(ctrl->f2, DRAM_CONFIG_HIGH); + dch &= ~(DCH_RDPREAMBLE_MASK << DCH_RDPREAMBLE_SHIFT); + rdpreamble = 0; + if (is_registered(ctrl)) { + if (divisor == ((10 << 1)+0)) { + /* 100Mhz, 9ns */ + rdpreamble = ((9 << 1)+ 0); + } + else if (divisor == ((7 << 1)+1)) { + /* 133Mhz, 8ns */ + rdpreamble = ((8 << 1)+0); + } + else if (divisor == ((6 << 1)+0)) { + /* 166Mhz, 7.5ns */ + rdpreamble = ((7 << 1)+1); + } + } + else { + int slots; + int i; + slots = 0; + for(i = 0; i < 4; i++) { + if (ctrl->channel0[i]) { + slots += 1; + } + } + if (divisor == ((10 << 1)+0)) { + /* 100Mhz */ + if (slots <= 2) { + /* 9ns */ + rdpreamble = ((9 << 1)+0); + } else { + /* 14ns */ + rdpreamble = ((14 << 1)+0); + } + } + else if (divisor == ((7 << 1)+1)) { + /* 133Mhz */ + if (slots <= 2) { + /* 7ns */ + rdpreamble = ((7 << 1)+0); + } else { + /* 11 ns */ + rdpreamble = ((11 << 1)+0); + } + } + else if (divisor == ((6 << 1)+0)) { + /* 166Mhz */ + if (slots <= 2) { + /* 6ns */ + rdpreamble = ((7 << 1)+0); + } else { + /* 9ns */ + rdpreamble = ((9 << 1)+0); + } + } + else if (divisor == ((5 << 1)+0)) { + /* 200Mhz */ + if (slots <= 2) { + /* 5ns */ + rdpreamble = ((5 << 1)+0); + } else { + /* 7ns */ + rdpreamble = ((7 << 1)+0); + } + } + } + if ((rdpreamble < DCH_RDPREAMBLE_MIN) || (rdpreamble > DCH_RDPREAMBLE_MAX)) { + die("Unknown rdpreamble"); + } + dch |= (rdpreamble - DCH_RDPREAMBLE_BASE) << DCH_RDPREAMBLE_SHIFT; + pci_write_config32(ctrl->f2, DRAM_CONFIG_HIGH, dch); +} + +static void set_max_async_latency(const struct mem_controller *ctrl, const struct mem_param *param) +{ + uint32_t dch; + int i; + unsigned async_lat; + int dimms; + + dimms = count_dimms(ctrl); + + dch = pci_read_config32(ctrl->f2, DRAM_CONFIG_HIGH); + dch &= ~(DCH_ASYNC_LAT_MASK << DCH_ASYNC_LAT_SHIFT); + async_lat = 0; + if (is_registered(ctrl)) { + if (dimms == 4) { + /* 9ns */ + async_lat = 9; + } + else { + /* 8ns */ + async_lat = 8; + } + } + else { + if (dimms > 3) { + die("Too many unbuffered dimms"); + } + else if (dimms == 3) { + /* 7ns */ + async_lat = 7; + } + else { + /* 6ns */ + async_lat = 6; + } + } + dch |= ((async_lat - DCH_ASYNC_LAT_BASE) << DCH_ASYNC_LAT_SHIFT); + pci_write_config32(ctrl->f2, DRAM_CONFIG_HIGH, dch); +} + +static void set_idle_cycle_limit(const struct mem_controller *ctrl, const struct mem_param *param) +{ + uint32_t dch; + /* AMD says to Hardcode this */ + dch = pci_read_config32(ctrl->f2, DRAM_CONFIG_HIGH); + dch &= ~(DCH_IDLE_LIMIT_MASK << DCH_IDLE_LIMIT_SHIFT); + dch |= DCH_IDLE_LIMIT_16 << DCH_IDLE_LIMIT_SHIFT; + dch |= DCH_DYN_IDLE_CTR_EN; + pci_write_config32(ctrl->f2, DRAM_CONFIG_HIGH, dch); +} + +static void spd_set_dram_timing(const struct mem_controller *ctrl, const struct mem_param *param) +{ + int dimms; + int i; + init_Tref(ctrl, param); + for(i = 0; (i < 4) && ctrl->channel0[i]; i++) { + int rc; + /* DRAM Timing Low Register */ + if (update_dimm_Trc (ctrl, param, i) < 0) goto dimm_err; + if (update_dimm_Trfc(ctrl, param, i) < 0) goto dimm_err; + if (update_dimm_Trcd(ctrl, param, i) < 0) goto dimm_err; + if (update_dimm_Trrd(ctrl, param, i) < 0) goto dimm_err; + if (update_dimm_Tras(ctrl, param, i) < 0) goto dimm_err; + if (update_dimm_Trp (ctrl, param, i) < 0) goto dimm_err; + + /* DRAM Timing High Register */ + if (update_dimm_Tref(ctrl, param, i) < 0) goto dimm_err; + + /* DRAM Config Low */ + if (update_dimm_x4 (ctrl, param, i) < 0) goto dimm_err; + if (update_dimm_ecc(ctrl, param, i) < 0) goto dimm_err; + continue; + dimm_err: + disable_dimm(ctrl, i); + + } + /* DRAM Timing Low Register */ + set_Twr(ctrl, param); + + /* DRAM Timing High Register */ + set_Twtr(ctrl, param); + set_Trwt(ctrl, param); + set_Twcl(ctrl, param); + + /* DRAM Config High */ + set_read_preamble(ctrl, param); + set_max_async_latency(ctrl, param); + set_idle_cycle_limit(ctrl, param); +} + +static void sdram_set_spd_registers(const struct mem_controller *ctrl) +{ + const struct mem_param *param; + spd_enable_2channels(ctrl); + spd_set_ram_size(ctrl); + spd_handle_unbuffered_dimms(ctrl); + param = spd_set_memclk(ctrl); + spd_set_dram_timing(ctrl, param); + order_dimms(ctrl); +} + +#define TIMEOUT_LOOPS 300000 +static void sdram_enable(int controllers, const struct mem_controller *ctrl) +{ + int i; + + /* Before enabling memory start the memory clocks */ + for(i = 0; i < controllers; i++) { + uint32_t dch; + dch = pci_read_config32(ctrl[i].f2, DRAM_CONFIG_HIGH); + dch |= DCH_MEMCLK_VALID; + pci_write_config32(ctrl[i].f2, DRAM_CONFIG_HIGH, dch); + } + + /* And if necessary toggle the the reset on the dimms by hand */ + memreset(controllers, ctrl); + + for(i = 0; i < controllers; i++) { + uint32_t dcl; + /* Toggle DisDqsHys to get it working */ + dcl = pci_read_config32(ctrl[i].f2, DRAM_CONFIG_LOW); +#if 0 + print_debug("dcl: "); + print_debug_hex32(dcl); + print_debug("\r\n"); +#endif +#warning "FIXME set the ECC type to perform" +#warning "FIXME initialize the scrub registers" +#if 1 + if (dcl & DCL_DimmEccEn) { + print_debug("ECC enabled\r\n"); + } +#endif + dcl |= DCL_DisDqsHys; + pci_write_config32(ctrl[i].f2, DRAM_CONFIG_LOW, dcl); + dcl &= ~DCL_DisDqsHys; + dcl &= ~DCL_DLL_Disable; + dcl &= ~DCL_D_DRV; + dcl &= ~DCL_QFC_EN; + dcl |= DCL_DramInit; + pci_write_config32(ctrl[i].f2, DRAM_CONFIG_LOW, dcl); + + } + for(i = 0; i < controllers; i++) { + uint32_t dcl; + print_debug("Initializing memory: "); + int loops = 0; + do { + dcl = pci_read_config32(ctrl[i].f2, DRAM_CONFIG_LOW); + loops += 1; + if ((loops & 1023) == 0) { + print_debug("."); + } + } while(((dcl & DCL_DramInit) != 0) && (loops < TIMEOUT_LOOPS)); + if (loops >= TIMEOUT_LOOPS) { + print_debug(" failed\r\n"); + } else { + print_debug(" done\r\n"); + } +#if 0 + if (dcl & DCL_DimmEccEn) { + print_debug("Clearing memory: "); + loops = 0; + dcl &= ~DCL_MemClrStatus; + pci_write_config32(ctrl[i].f2, DRAM_CONFIG_LOW, dcl); + + do { + dcl = pci_read_config32(ctrl[i].f2, DRAM_CONFIG_LOW); + loops += 1; + if ((loops & 1023) == 0) { + print_debug(" "); + print_debug_hex32(loops); + } + } while(((dcl & DCL_MemClrStatus) == 0) && (loops < TIMEOUT_LOOPS)); + if (loops >= TIMEOUT_LOOPS) { + print_debug("failed\r\n"); + } else { + print_debug("done\r\n"); + } + pci_write_config32(ctrl[i].f3, SCRUB_ADDR_LOW, 0); + pci_write_config32(ctrl[i].f3, SCRUB_ADDR_HIGH, 0); + } +#endif + } +} diff --git a/src/northbridge/via/vt8601/raminit.h b/src/northbridge/via/vt8601/raminit.h new file mode 100644 index 0000000000..4d3cdc16ce --- /dev/null +++ b/src/northbridge/via/vt8601/raminit.h @@ -0,0 +1,4 @@ +#ifndef RAMINIT_H +#define RAMINIT_H + +#endif /* RAMINIT_H */ -- cgit v1.2.3