From 228aae589cca0f0025da476150da247c247a711a Mon Sep 17 00:00:00 2001 From: david Date: Fri, 4 Dec 2015 14:04:15 +0800 Subject: google/lars: Disable kepler device Disable kepler device, it is removed and was not used on proto anyway. BUG=none BRANCH=none TEST=build and boot on lars proto Change-Id: I137b82b8dca23f5b40adcc6a056e77a4ff54d4d5 Signed-off-by: Patrick Georgi Original-Commit-Id: 44d63453a9b31331d13d05f8f86d4218af0f0aa1 Original-Change-Id: Ib0892bf93b1d0cda1c0143d2b16cd58aeda83131 Original-Signed-off-by: David Wu Original-Reviewed-on: https://chromium-review.googlesource.com/315950 Original-Commit-Ready: David Wu Original-Tested-by: David Wu Original-Reviewed-by: Aaron Durbin Original-Reviewed-by: Subrata Banik Reviewed-on: https://review.coreboot.org/12950 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth --- src/mainboard/google/lars/devicetree.cb | 9 +++------ src/mainboard/google/lars/gpio.h | 4 ++-- 2 files changed, 5 insertions(+), 8 deletions(-) (limited to 'src') diff --git a/src/mainboard/google/lars/devicetree.cb b/src/mainboard/google/lars/devicetree.cb index d74392165f..677ee0bcc8 100644 --- a/src/mainboard/google/lars/devicetree.cb +++ b/src/mainboard/google/lars/devicetree.cb @@ -43,15 +43,12 @@ chip soc/intel/skylake register "SkipExtGfxScan" = "1" register "Device4Enable" = "1" - # Enable Root port 1 and 5. + # Enable Root port 1. register "PcieRpEnable[0]" = "1" - register "PcieRpEnable[4]" = "1" # Enable CLKREQ# register "PcieRpClkReqSupport[0]" = "1" - register "PcieRpClkReqSupport[4]" = "1" - # RP 1 uses SRCCLKREQ1# while RP 5 uses SRCCLKREQ2# + # RP 1 uses SRCCLKREQ1# register "PcieRpClkReqNumber[0]" = "1" - register "PcieRpClkReqNumber[4]" = "2" register "usb2_ports[0]" = "USB2_PORT_TYPE_C" # Type-C Port 1 register "usb2_ports[1]" = "USB2_PORT_FLEX" # Camera @@ -106,7 +103,7 @@ chip soc/intel/skylake device pci 1c.1 off end # PCI Express Port 2 device pci 1c.2 off end # PCI Express Port 3 device pci 1c.3 off end # PCI Express Port 4 - device pci 1c.4 on end # PCI Express Port 5 + device pci 1c.4 off end # PCI Express Port 5 device pci 1c.5 off end # PCI Express Port 6 device pci 1c.6 off end # PCI Express Port 7 device pci 1c.7 off end # PCI Express Port 8 diff --git a/src/mainboard/google/lars/gpio.h b/src/mainboard/google/lars/gpio.h index bc11729f74..3aebebc0aa 100755 --- a/src/mainboard/google/lars/gpio.h +++ b/src/mainboard/google/lars/gpio.h @@ -115,7 +115,7 @@ static const struct pad_config gpio_table[] = { /* UART0_RXD */ /* GPP_C8 */ /* UART0_TXD */ /* GPP_C9 */ /* NFC_RST* */ PAD_CFG_GPO(GPP_C10, 0, DEEP), -/* EN_PP3300_KEPLER */ PAD_CFG_TERM_GPO(GPP_C11, 1, 20K_PD, DEEP), +/* EN_PP3300_KEPLER */ PAD_CFG_TERM_GPO(GPP_C11, 0, 20K_PD, DEEP), /* PCH_MEM_CFG0 */ PAD_CFG_GPI(GPP_C12, NONE, DEEP), /* PCH_MEM_CFG1 */ PAD_CFG_GPI(GPP_C13, NONE, DEEP), /* PCH_MEM_CFG2 */ PAD_CFG_GPI(GPP_C14, NONE, DEEP), @@ -225,7 +225,7 @@ static const struct pad_config gpio_table[] = { /* Early pad configuration in romstage. */ static const struct pad_config early_gpio_table[] = { /* SRCCLKREQ2# */ PAD_CFG_NF(GPP_B7, NONE, DEEP, NF1), /* KEPLER */ -/* UART0_CTS# */ PAD_CFG_GPO(GPP_C11, 1, DEEP), /* EN_PP3300_KEPLER */ +/* UART0_CTS# */ PAD_CFG_GPO(GPP_C11, 0, DEEP), /* EN_PP3300_KEPLER */ }; #endif -- cgit v1.2.3