From 1a7a7e610e0fbc54fcc802bedbb31673dffff449 Mon Sep 17 00:00:00 2001 From: Sven Schnelle Date: Sun, 17 Jun 2012 14:23:35 +0200 Subject: i5000: enforce hard reset Not doing a hard reset leaves the BOFL0 register cleared, which prevents the BSP selection from working. To make sure we start with known values, use the SPAD0 register for soft reset detection. If there's a value other than 0, do a hard reset. Change-Id: I390e3208084cfd32d73cce439ddf2bc9d4436a62 Signed-off-by: Sven Schnelle Reviewed-on: http://review.coreboot.org/1103 Tested-by: build bot (Jenkins) --- src/northbridge/intel/i5000/halt_second_bsp.S | 31 ++++++++++++++++++++++++++- 1 file changed, 30 insertions(+), 1 deletion(-) (limited to 'src') diff --git a/src/northbridge/intel/i5000/halt_second_bsp.S b/src/northbridge/intel/i5000/halt_second_bsp.S index a1a1b156db..2dc533ac53 100644 --- a/src/northbridge/intel/i5000/halt_second_bsp.S +++ b/src/northbridge/intel/i5000/halt_second_bsp.S @@ -2,6 +2,26 @@ movl %eax, %ebp + /* check if SPAD0 is cleared. If yes, it means this was a hard reset */ + movl $0x800080d0, %eax + movw $0xcf8, %dx + outl %eax, %dx + + addw $4, %dx + inl %dx, %eax + cmp $0, %eax + je no_reset + + /* perform hard reset */ + movw $0xcf9, %dx + movw $0x06, %ax + outw %ax, %dx + +loop0: hlt + jmp loop + +no_reset: + /* Read the semaphore register of i5000 (BOFL0). If it returns zero, it means there was already another read by another CPU */ @@ -25,5 +45,14 @@ loop: hlt jmp loop -1: /* Restore BIST */ +1: /* set magic value for soft reset detection */ + movl $0x800080d0, %eax + movw $0xcf8, %dx + outl %eax, %dx + + addw $4, %dx + movl $0x12345678, %eax + outl %eax, %dx + + /* Restore BIST */ mov %ebp, %eax -- cgit v1.2.3