From 0a7c49efa02b770f9f4f723633f82784be7ae6b8 Mon Sep 17 00:00:00 2001 From: Duncan Laurie Date: Thu, 20 Jun 2013 12:40:55 -0700 Subject: HDA: Enable Mini-HDA and fix up PCH-HDA init The SystemAgent contains a mini-hd audio controller at PCI 0:3.0 which uses the same verb table init sequence as the southbridge. In order to avoid two copies of the verb table loading code I separated out the HDA verb table functions into a file that can be re-used and then added a minihd driver to the haswell northbridge. The minihd verb table is the same across devices so it can live within the minihd driver rather than needing to be specified in each separate mainboard. I also fixed up the driver for lynxpoint HDA by following the reference code. Without HDMI cable plugged in driver does not find any codec, and it does not seem to re-probe when HDMI is connected. We may be missing kernel patches for this. hda-intel 0000:00:03.0: no codecs found! With a basic kernel patch to add 0x0a0c device ID to HDA driver and with HDMI cable connected it is much happier: snd_hda_intel 0000:00:03.0: irq 60 for MSI/MSI-X input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9 snd_hda_intel 0000:00:1b.0: irq 61 for MSI/MSI-X input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10 input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11 Change-Id: Ifa587984be4fc2801704a0368b9cdf8379c2450e Signed-off-by: Duncan Laurie Reviewed-on: https://gerrit.chromium.org/gerrit/59336 Reviewed-by: Aaron Durbin Reviewed-on: http://review.coreboot.org/4318 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich --- .../google/falco/acpi/haswell_pci_irqs.asl | 4 + src/mainboard/google/falco/devicetree.cb | 1 + .../google/peppy/acpi/haswell_pci_irqs.asl | 4 + src/mainboard/google/peppy/devicetree.cb | 1 + .../google/slippy/acpi/haswell_pci_irqs.asl | 4 + src/mainboard/google/slippy/devicetree.cb | 1 + src/northbridge/intel/haswell/Makefile.inc | 1 + src/northbridge/intel/haswell/early_init.c | 5 +- src/northbridge/intel/haswell/haswell.h | 14 +- src/northbridge/intel/haswell/minihd.c | 140 +++++++++ src/southbridge/intel/lynxpoint/Makefile.inc | 1 + src/southbridge/intel/lynxpoint/azalia.c | 325 +++++---------------- src/southbridge/intel/lynxpoint/hda_verb.c | 254 ++++++++++++++++ src/southbridge/intel/lynxpoint/hda_verb.h | 37 +++ 14 files changed, 532 insertions(+), 260 deletions(-) create mode 100644 src/northbridge/intel/haswell/minihd.c create mode 100644 src/southbridge/intel/lynxpoint/hda_verb.c create mode 100644 src/southbridge/intel/lynxpoint/hda_verb.h (limited to 'src') diff --git a/src/mainboard/google/falco/acpi/haswell_pci_irqs.asl b/src/mainboard/google/falco/acpi/haswell_pci_irqs.asl index 82a2eba29e..aa4a862074 100644 --- a/src/mainboard/google/falco/acpi/haswell_pci_irqs.asl +++ b/src/mainboard/google/falco/acpi/haswell_pci_irqs.asl @@ -26,6 +26,8 @@ Method(_PRT) Return (Package() { // Onboard graphics (IGD) 0:2.0 Package() { 0x0002ffff, 0, 0, 16 }, + // Mini-HD Audio 0:3.0 + Package() { 0x0003ffff, 0, 0, 16 }, // High Definition Audio 0:1b.0 Package() { 0x001bffff, 0, 0, 22 }, // PCIe Root Ports 0:1c.x @@ -54,6 +56,8 @@ Method(_PRT) Return (Package() { // Onboard graphics (IGD) 0:2.0 Package() { 0x0002ffff, 0, \_SB.PCI0.LPCB.LNKA, 0 }, + // Mini-HD Audio 0:3.0 + Package() { 0x0003ffff, 0, \_SB.PCI0.LPCB.LNKA, 0 }, // High Definition Audio 0:1b.0 Package() { 0x001bffff, 0, \_SB.PCI0.LPCB.LNKG, 0 }, // PCIe Root Ports 0:1c.x diff --git a/src/mainboard/google/falco/devicetree.cb b/src/mainboard/google/falco/devicetree.cb index 21858e74fa..cdd5a2ed05 100644 --- a/src/mainboard/google/falco/devicetree.cb +++ b/src/mainboard/google/falco/devicetree.cb @@ -42,6 +42,7 @@ chip northbridge/intel/haswell device domain 0 on device pci 00.0 on end # host bridge device pci 02.0 on end # vga controller + device pci 03.0 on end # mini-hd audio chip southbridge/intel/lynxpoint register "pirqa_routing" = "0x8b" diff --git a/src/mainboard/google/peppy/acpi/haswell_pci_irqs.asl b/src/mainboard/google/peppy/acpi/haswell_pci_irqs.asl index 82a2eba29e..aa4a862074 100644 --- a/src/mainboard/google/peppy/acpi/haswell_pci_irqs.asl +++ b/src/mainboard/google/peppy/acpi/haswell_pci_irqs.asl @@ -26,6 +26,8 @@ Method(_PRT) Return (Package() { // Onboard graphics (IGD) 0:2.0 Package() { 0x0002ffff, 0, 0, 16 }, + // Mini-HD Audio 0:3.0 + Package() { 0x0003ffff, 0, 0, 16 }, // High Definition Audio 0:1b.0 Package() { 0x001bffff, 0, 0, 22 }, // PCIe Root Ports 0:1c.x @@ -54,6 +56,8 @@ Method(_PRT) Return (Package() { // Onboard graphics (IGD) 0:2.0 Package() { 0x0002ffff, 0, \_SB.PCI0.LPCB.LNKA, 0 }, + // Mini-HD Audio 0:3.0 + Package() { 0x0003ffff, 0, \_SB.PCI0.LPCB.LNKA, 0 }, // High Definition Audio 0:1b.0 Package() { 0x001bffff, 0, \_SB.PCI0.LPCB.LNKG, 0 }, // PCIe Root Ports 0:1c.x diff --git a/src/mainboard/google/peppy/devicetree.cb b/src/mainboard/google/peppy/devicetree.cb index b9bc47fb17..909a3474c2 100644 --- a/src/mainboard/google/peppy/devicetree.cb +++ b/src/mainboard/google/peppy/devicetree.cb @@ -42,6 +42,7 @@ chip northbridge/intel/haswell device domain 0 on device pci 00.0 on end # host bridge device pci 02.0 on end # vga controller + device pci 03.0 on end # mini-hd audio chip southbridge/intel/lynxpoint register "pirqa_routing" = "0x8b" diff --git a/src/mainboard/google/slippy/acpi/haswell_pci_irqs.asl b/src/mainboard/google/slippy/acpi/haswell_pci_irqs.asl index 82a2eba29e..aa4a862074 100644 --- a/src/mainboard/google/slippy/acpi/haswell_pci_irqs.asl +++ b/src/mainboard/google/slippy/acpi/haswell_pci_irqs.asl @@ -26,6 +26,8 @@ Method(_PRT) Return (Package() { // Onboard graphics (IGD) 0:2.0 Package() { 0x0002ffff, 0, 0, 16 }, + // Mini-HD Audio 0:3.0 + Package() { 0x0003ffff, 0, 0, 16 }, // High Definition Audio 0:1b.0 Package() { 0x001bffff, 0, 0, 22 }, // PCIe Root Ports 0:1c.x @@ -54,6 +56,8 @@ Method(_PRT) Return (Package() { // Onboard graphics (IGD) 0:2.0 Package() { 0x0002ffff, 0, \_SB.PCI0.LPCB.LNKA, 0 }, + // Mini-HD Audio 0:3.0 + Package() { 0x0003ffff, 0, \_SB.PCI0.LPCB.LNKA, 0 }, // High Definition Audio 0:1b.0 Package() { 0x001bffff, 0, \_SB.PCI0.LPCB.LNKG, 0 }, // PCIe Root Ports 0:1c.x diff --git a/src/mainboard/google/slippy/devicetree.cb b/src/mainboard/google/slippy/devicetree.cb index b9bc47fb17..909a3474c2 100644 --- a/src/mainboard/google/slippy/devicetree.cb +++ b/src/mainboard/google/slippy/devicetree.cb @@ -42,6 +42,7 @@ chip northbridge/intel/haswell device domain 0 on device pci 00.0 on end # host bridge device pci 02.0 on end # vga controller + device pci 03.0 on end # mini-hd audio chip southbridge/intel/lynxpoint register "pirqa_routing" = "0x8b" diff --git a/src/northbridge/intel/haswell/Makefile.inc b/src/northbridge/intel/haswell/Makefile.inc index b2ac85ec6d..04b0d2fc7f 100644 --- a/src/northbridge/intel/haswell/Makefile.inc +++ b/src/northbridge/intel/haswell/Makefile.inc @@ -22,6 +22,7 @@ ramstage-y += gma.c ramstage-$(CONFIG_GENERATE_ACPI_TABLES) += acpi.c ramstage-y += mrccache.c +ramstage-y += minihd.c romstage-y += raminit.c romstage-y += mrccache.c diff --git a/src/northbridge/intel/haswell/early_init.c b/src/northbridge/intel/haswell/early_init.c index 5b364189e9..7f9f1876b1 100644 --- a/src/northbridge/intel/haswell/early_init.c +++ b/src/northbridge/intel/haswell/early_init.c @@ -103,8 +103,9 @@ void haswell_early_initialization(int chipset_type) /* Setup all BARs required for early PCIe and raminit */ haswell_setup_bars(); - /* Device Enable */ - pci_write_config32(PCI_DEV(0, 0, 0), DEVEN, DEVEN_HOST | DEVEN_IGD); + /* Device Enable: IGD and Mini-HD Audio */ + pci_write_config32(PCI_DEV(0, 0, 0), DEVEN, + DEVEN_D0EN | DEVEN_D2EN | DEVEN_D3EN); haswell_setup_graphics(); } diff --git a/src/northbridge/intel/haswell/haswell.h b/src/northbridge/intel/haswell/haswell.h index c9e10ed4f5..bcd22d1be6 100644 --- a/src/northbridge/intel/haswell/haswell.h +++ b/src/northbridge/intel/haswell/haswell.h @@ -50,12 +50,14 @@ #define GGC 0x50 /* GMCH Graphics Control */ #define DEVEN 0x54 /* Device Enable */ -#define DEVEN_PEG60 (1 << 13) -#define DEVEN_IGD (1 << 4) -#define DEVEN_PEG10 (1 << 3) -#define DEVEN_PEG11 (1 << 2) -#define DEVEN_PEG12 (1 << 1) -#define DEVEN_HOST (1 << 0) +#define DEVEN_D7EN (1 << 14) +#define DEVEN_D4EN (1 << 7) +#define DEVEN_D3EN (1 << 5) +#define DEVEN_D2EN (1 << 4) +#define DEVEN_D1F0EN (1 << 3) +#define DEVEN_D1F1EN (1 << 2) +#define DEVEN_D1F2EN (1 << 1) +#define DEVEN_D0EN (1 << 0) #define PAM0 0x80 #define PAM1 0x81 diff --git a/src/northbridge/intel/haswell/minihd.c b/src/northbridge/intel/haswell/minihd.c new file mode 100644 index 0000000000..cef61263be --- /dev/null +++ b/src/northbridge/intel/haswell/minihd.c @@ -0,0 +1,140 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Advanced Micro Devices, Inc. + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static const u32 minihd_verb_table[] = { + /* coreboot specific header */ + 0x80862807, // Codec Vendor / Device ID: Intel Haswell Mini-HD + 0x00000000, // Subsystem ID + 0x00000004, // Number of jacks + + /* Enable 3rd Pin and Converter Widget */ + 0x00878101, + + /* Pin Widget 5 - PORT B */ + 0x00571C10, + 0x00571D00, + 0x00571E56, + 0x00571F18, + + /* Pin Widget 6 - PORT C */ + 0x00671C20, + 0x00671D00, + 0x00671E56, + 0x00671F18, + + /* Pin Widget 7 - PORT D */ + 0x00771C30, + 0x00771D00, + 0x00771E56, + 0x00771F18, + + /* Disable 3rd Pin and Converter Widget */ + 0x00878100, + + /* Dummy entries to fill out the table */ + 0x00878100, + 0x00878100, +}; + +static void minihd_init(struct device *dev) +{ + struct resource *res; + u32 base, reg32; + int codec_mask, i; + + /* Find base address */ + res = find_resource(dev, PCI_BASE_ADDRESS_0); + if (!res) + return; + + base = (u32)res->base; + printk(BIOS_DEBUG, "Mini-HD: base = %08x\n", (u32)base); + + /* Set Bus Master */ + reg32 = pci_read_config32(dev, PCI_COMMAND); + pci_write_config32(dev, PCI_COMMAND, reg32 | PCI_COMMAND_MASTER); + + /* Mini-HD configuration */ + reg32 = read32(base + 0x100c); + reg32 &= 0xfffc0000; + reg32 |= 0x4; + write32(base + 0x100c, reg32); + + reg32 = read32(base + 0x1010); + reg32 &= 0xfffc0000; + reg32 |= 0x4b; + write32(base + 0x1010, reg32); + + /* Init the codec and write the verb table */ + codec_mask = hda_codec_detect(base); + + if (codec_mask) { + for (i = 3; i >= 0; i--) { + if (codec_mask & (1 << i)) + hda_codec_init(base, i, + sizeof(minihd_verb_table), + minihd_verb_table); + } + } +} + +static void minihd_set_subsystem(device_t dev, unsigned vendor, unsigned device) +{ + if (!vendor || !device) { + pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID, + pci_read_config32(dev, PCI_VENDOR_ID)); + } else { + pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID, + ((device & 0xffff) << 16) | (vendor & 0xffff)); + } +} + +static struct pci_operations minihd_pci_ops = { + .set_subsystem = minihd_set_subsystem, +}; + +static struct device_operations minihd_ops = { + .read_resources = pci_dev_read_resources, + .set_resources = pci_dev_set_resources, + .enable_resources = pci_dev_enable_resources, + .init = minihd_init, + .scan_bus = 0, + .ops_pci = &minihd_pci_ops, +}; + +static const unsigned short pci_device_ids[] = { 0x0a0c, 0 }; + +static const struct pci_driver haswell_minihd __pci_driver = { + .ops = &minihd_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .devices = pci_device_ids, +}; + diff --git a/src/southbridge/intel/lynxpoint/Makefile.inc b/src/southbridge/intel/lynxpoint/Makefile.inc index 90419d65f6..92e1c0092e 100644 --- a/src/southbridge/intel/lynxpoint/Makefile.inc +++ b/src/southbridge/intel/lynxpoint/Makefile.inc @@ -33,6 +33,7 @@ ramstage-y += usb_ehci.c ramstage-y += usb_xhci.c ramstage-y += me_9.x.c ramstage-y += smbus.c +ramstage-y += hda_verb.c ramstage-$(CONFIG_INTEL_LYNXPOINT_LP) += serialio.c ramstage-y += rcba.c diff --git a/src/southbridge/intel/lynxpoint/azalia.c b/src/southbridge/intel/lynxpoint/azalia.c index ee12042863..b63672ded3 100644 --- a/src/southbridge/intel/lynxpoint/azalia.c +++ b/src/southbridge/intel/lynxpoint/azalia.c @@ -27,240 +27,47 @@ #include #include #include "pch.h" - -#define HDA_ICII_REG 0x68 -#define HDA_ICII_BUSY (1 << 0) -#define HDA_ICII_VALID (1 << 1) - -typedef struct southbridge_intel_bd82x6x_config config_t; - -static int set_bits(u32 port, u32 mask, u32 val) -{ - u32 reg32; - int count; - - /* Write (val & mask) to port */ - val &= mask; - reg32 = read32(port); - reg32 &= ~mask; - reg32 |= val; - write32(port, reg32); - - /* Wait for readback of register to - * match what was just written to it - */ - count = 50; - do { - /* Wait 1ms based on BKDG wait time */ - mdelay(1); - reg32 = read32(port); - reg32 &= mask; - } while ((reg32 != val) && --count); - - /* Timeout occurred */ - if (!count) - return -1; - return 0; -} - -static int codec_detect(u32 base) -{ - u8 reg8; - - /* Set Bit 0 to 1 to exit reset state (BAR + 0x8)[0] */ - if (set_bits(base + 0x08, 1, 1) == -1) - goto no_codec; - - /* Write back the value once reset bit is set. */ - write16(base + 0x0, read16(base + 0x0)); - - /* Read in Codec location (BAR + 0xe)[2..0]*/ - reg8 = read8(base + 0xe); - reg8 &= 0x0f; - if (!reg8) - goto no_codec; - - return reg8; - -no_codec: - /* Codec Not found */ - /* Put HDA back in reset (BAR + 0x8) [0] */ - set_bits(base + 0x08, 1, 0); - printk(BIOS_DEBUG, "Azalia: No codec!\n"); - return 0; -} +#include "hda_verb.h" const u32 * cim_verb_data = NULL; u32 cim_verb_data_size = 0; const u32 * pc_beep_verbs = NULL; u32 pc_beep_verbs_size = 0; -static u32 find_verb(struct device *dev, u32 viddid, const u32 ** verb) -{ - int idx=0; - - while (idx < (cim_verb_data_size / sizeof(u32))) { - u32 verb_size = 4 * cim_verb_data[idx+2]; // in u32 - if (cim_verb_data[idx] != viddid) { - idx += verb_size + 3; // skip verb + header - continue; - } - *verb = &cim_verb_data[idx+3]; - return verb_size; - } - - /* Not all codecs need to load another verb */ - return 0; -} - -/** - * Wait 50usec for the codec to indicate it is ready - * no response would imply that the codec is non-operative - */ - -static int wait_for_ready(u32 base) -{ - /* Use a 50 usec timeout - the Linux kernel uses the - * same duration */ - - int timeout = 50; - - while(timeout--) { - u32 reg32 = read32(base + HDA_ICII_REG); - if (!(reg32 & HDA_ICII_BUSY)) - return 0; - udelay(1); - } - - return -1; -} - -/** - * Wait 50usec for the codec to indicate that it accepted - * the previous command. No response would imply that the code - * is non-operative - */ - -static int wait_for_valid(u32 base) -{ - u32 reg32; - - /* Send the verb to the codec */ - reg32 = read32(base + HDA_ICII_REG); - reg32 |= HDA_ICII_BUSY | HDA_ICII_VALID; - write32(base + HDA_ICII_REG, reg32); - - /* Use a 50 usec timeout - the Linux kernel uses the - * same duration */ - - int timeout = 50; - while(timeout--) { - reg32 = read32(base + HDA_ICII_REG); - if ((reg32 & (HDA_ICII_VALID | HDA_ICII_BUSY)) == - HDA_ICII_VALID) - return 0; - udelay(1); - } - - return -1; -} - -static void codec_init(struct device *dev, u32 base, int addr) +static void codecs_init(u32 base, u32 codec_mask) { - u32 reg32; - const u32 *verb; - u32 verb_size; int i; - printk(BIOS_DEBUG, "Azalia: Initializing codec #%d\n", addr); - - /* 1 */ - if (wait_for_ready(base) == -1) { - printk(BIOS_DEBUG, " codec not ready.\n"); - return; - } - - reg32 = (addr << 28) | 0x000f0000; - write32(base + 0x60, reg32); - - if (wait_for_valid(base) == -1) { - printk(BIOS_DEBUG, " codec not valid.\n"); - return; - } - - reg32 = read32(base + 0x64); - - /* 2 */ - printk(BIOS_DEBUG, "Azalia: codec viddid: %08x\n", reg32); - verb_size = find_verb(dev, reg32, &verb); - - if (!verb_size) { - printk(BIOS_DEBUG, "Azalia: No verb!\n"); - return; - } - printk(BIOS_DEBUG, "Azalia: verb_size: %d\n", verb_size); - - /* 3 */ - for (i = 0; i < verb_size; i++) { - if (wait_for_ready(base) == -1) - return; - - write32(base + 0x60, verb[i]); - - if (wait_for_valid(base) == -1) - return; - } - printk(BIOS_DEBUG, "Azalia: verb loaded.\n"); -} - -static void codecs_init(struct device *dev, u32 base, u32 codec_mask) -{ - int i; + /* Can support up to 4 codecs */ for (i = 3; i >= 0; i--) { if (codec_mask & (1 << i)) - codec_init(dev, base, i); + hda_codec_init(base, i, + cim_verb_data_size, + cim_verb_data); } - for (i = 0; i < pc_beep_verbs_size; i++) { - if (wait_for_ready(base) == -1) - return; - - write32(base + 0x60, pc_beep_verbs[i]); - - if (wait_for_valid(base) == -1) - return; - } + if (pc_beep_verbs_size && pc_beep_verbs) + hda_codec_write(base, pc_beep_verbs_size, pc_beep_verbs); } -static void azalia_init(struct device *dev) +static void azalia_pch_init(struct device *dev, u32 base) { - u32 base; - struct resource *res; - u32 codec_mask; u8 reg8; u16 reg16; u32 reg32; - /* Find base address */ - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (!res) - return; - - // NOTE this will break as soon as the Azalia get's a bar above - // 4G. Is there anything we can do about it? - base = (u32)res->base; - printk(BIOS_DEBUG, "Azalia: base = %08x\n", (u32)base); - if (RCBA32(0x2030) & (1 << 31)) { reg32 = pci_read_config32(dev, 0x120); reg32 &= 0xf8ffff01; - reg32 |= (1 << 24); // 25 for server + reg32 |= (1 << 25); reg32 |= RCBA32(0x2030) & 0xfe; pci_write_config32(dev, 0x120, reg32); - reg16 = pci_read_config16(dev, 0x78); - reg16 &= ~(1 << 11); - pci_write_config16(dev, 0x78, reg16); + if (!pch_is_lp()) { + reg16 = pci_read_config16(dev, 0x78); + reg16 &= ~(1 << 11); + pci_write_config16(dev, 0x78, reg16); + } } else printk(BIOS_DEBUG, "Azalia: V1CTL disabled.\n"); @@ -272,73 +79,87 @@ static void azalia_init(struct device *dev) if (pci_read_config32(dev, 0x120) & ((1 << 24) | (1 << 25) | (1 << 26))) { reg32 = pci_read_config32(dev, 0x120); - reg32 |= (1 << 31); + if (pch_is_lp()) + reg32 &= ~(1 << 31); + else + reg32 |= (1 << 31); pci_write_config32(dev, 0x120, reg32); } - // Enable HDMI codec: - reg32 = pci_read_config32(dev, 0xc4); - reg32 |= (1 << 1); - pci_write_config32(dev, 0xc4, reg32); - reg8 = pci_read_config8(dev, 0x43); - reg8 |= (1 << 5) | (1 << 6) | (1 << 2) | (1 << 1) | (1 << 0); + if (pch_is_lp()) + reg8 &= ~(1 << 6); + else + reg8 |= (1 << 4); pci_write_config8(dev, 0x43, reg8); - /* Additional programming steps */ - reg32 = pci_read_config32(dev, 0xc4); - reg32 |= (1 << 13) | (1 << 10); - pci_write_config32(dev, 0xc4, reg32); - - reg32 = pci_read_config32(dev, 0xd0); - reg32 &= ~(1 << 31); - pci_write_config32(dev, 0xd0, reg32); + if (!pch_is_lp()) { + reg32 = pci_read_config32(dev, 0xc0); + reg32 |= (1 << 17); + pci_write_config32(dev, 0xc0, reg32); + } /* Additional programming steps */ reg32 = pci_read_config32(dev, 0xc4); - reg32 |= (1 << 13); - pci_write_config32(dev, 0xc4, reg32); - - reg32 = pci_read_config32(dev, 0xc4); - reg32 |= (1 << 10); + if (pch_is_lp()) + reg32 |= (1 << 24); + else + reg32 |= (1 << 14); pci_write_config32(dev, 0xc4, reg32); - reg32 = pci_read_config32(dev, 0xd0); - reg32 &= ~(1 << 31); - pci_write_config32(dev, 0xd0, reg32); - - /* Set Bus Master */ - reg32 = pci_read_config32(dev, PCI_COMMAND); - pci_write_config32(dev, PCI_COMMAND, reg32 | PCI_COMMAND_MASTER); - - pci_write_config8(dev, 0x3c, 0x0a); // unused? - - /* Codec Initialization Programming Sequence */ - reg32 = read32(base + 0x08); - reg32 |= (1 << 0); - write32(base + 0x08, reg32); + if (!pch_is_lp()) { + reg32 = pci_read_config32(dev, 0xd0); + reg32 &= ~(1 << 31); + pci_write_config32(dev, 0xd0, reg32); + } - // reg8 = pci_read_config8(dev, 0x40); // Audio Control - reg8 |= 1; // Select Azalia mode. This needs to be controlled via devicetree.cb + reg8 |= 1; // Select Azalia mode pci_write_config8(dev, 0x40, reg8); reg8 = pci_read_config8(dev, 0x4d); // Docking Status reg8 &= ~(1 << 7); // Docking not supported pci_write_config8(dev, 0x4d, reg8); - codec_mask = codec_detect(base); + if (pch_is_lp()) { + reg16 = read32(base + 0x0012); + reg16 |= (1 << 0); + write32(base + 0x0012, reg16); + + /* disable Auto Voltage Detector */ + reg8 = pci_read_config8(dev, 0x42); + reg8 |= (1 << 2); + pci_write_config8(dev, 0x42, reg8); + } +} + +static void azalia_init(struct device *dev) +{ + u32 base; + struct resource *res; + u32 codec_mask; + u32 reg32; + + /* Find base address */ + res = find_resource(dev, PCI_BASE_ADDRESS_0); + if (!res) + return; + + base = (u32)res->base; + printk(BIOS_DEBUG, "Azalia: base = %08x\n", (u32)base); + + /* Set Bus Master */ + reg32 = pci_read_config32(dev, PCI_COMMAND); + pci_write_config32(dev, PCI_COMMAND, reg32 | PCI_COMMAND_MASTER); + + azalia_pch_init(dev, base); + + codec_mask = hda_codec_detect(base); if (codec_mask) { printk(BIOS_DEBUG, "Azalia: codec_mask = %02x\n", codec_mask); - codecs_init(dev, base, codec_mask); + codecs_init(base, codec_mask); } - - /* Enable dynamic clock gating */ - reg8 = pci_read_config8(dev, 0x43); - reg8 &= ~0x7; - reg8 |= (1 << 2) | (1 << 0); - pci_write_config8(dev, 0x43, reg8); } static void azalia_set_subsystem(device_t dev, unsigned vendor, unsigned device) diff --git a/src/southbridge/intel/lynxpoint/hda_verb.c b/src/southbridge/intel/lynxpoint/hda_verb.c new file mode 100644 index 0000000000..234a1ab439 --- /dev/null +++ b/src/southbridge/intel/lynxpoint/hda_verb.c @@ -0,0 +1,254 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Advanced Micro Devices, Inc. + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2011 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include "pch.h" +#include "hda_verb.h" + +/** + * Set bits in a register and wait for status + */ +static int set_bits(u32 port, u32 mask, u32 val) +{ + u32 reg32; + int count; + + /* Write (val & mask) to port */ + val &= mask; + reg32 = read32(port); + reg32 &= ~mask; + reg32 |= val; + write32(port, reg32); + + /* Wait for readback of register to + * match what was just written to it + */ + count = 50; + do { + /* Wait 1ms based on BKDG wait time */ + mdelay(1); + reg32 = read32(port); + reg32 &= mask; + } while ((reg32 != val) && --count); + + /* Timeout occurred */ + if (!count) + return -1; + return 0; +} + +/** + * Probe for supported codecs + */ +int hda_codec_detect(u32 base) +{ + u8 reg8; + + /* Set Bit 0 to 1 to exit reset state (BAR + 0x8)[0] */ + if (set_bits(base + HDA_GCTL_REG, HDA_GCTL_CRST, HDA_GCTL_CRST) < 0) + goto no_codec; + + /* Write back the value once reset bit is set. */ + write16(base + HDA_GCAP_REG, read16(base + HDA_GCAP_REG)); + + /* Read in Codec location (BAR + 0xe)[2..0]*/ + reg8 = read8(base + HDA_STATESTS_REG); + reg8 &= 0x0f; + if (!reg8) + goto no_codec; + + return reg8; + +no_codec: + /* Codec Not found */ + /* Put HDA back in reset (BAR + 0x8) [0] */ + set_bits(base + HDA_GCTL_REG, HDA_GCTL_CRST, 0); + printk(BIOS_DEBUG, "HDA: No codec!\n"); + return 0; +} + +/** + * Wait 50usec for the codec to indicate it is ready + * no response would imply that the codec is non-operative + */ +static int hda_wait_for_ready(u32 base) +{ + /* Use a 50 usec timeout - the Linux kernel uses the + * same duration */ + + int timeout = 50; + + while(timeout--) { + u32 reg32 = read32(base + HDA_ICII_REG); + if (!(reg32 & HDA_ICII_BUSY)) + return 0; + udelay(1); + } + + return -1; +} + +/** + * Wait 50usec for the codec to indicate that it accepted + * the previous command. No response would imply that the code + * is non-operative + */ +static int hda_wait_for_valid(u32 base) +{ + u32 reg32; + + /* Send the verb to the codec */ + reg32 = read32(base + HDA_ICII_REG); + reg32 |= HDA_ICII_BUSY | HDA_ICII_VALID; + write32(base + HDA_ICII_REG, reg32); + + /* Use a 50 usec timeout - the Linux kernel uses the + * same duration */ + + int timeout = 50; + while(timeout--) { + reg32 = read32(base + HDA_ICII_REG); + if ((reg32 & (HDA_ICII_VALID | HDA_ICII_BUSY)) == + HDA_ICII_VALID) + return 0; + udelay(1); + } + + return -1; +} + +/** + * Find a specific entry within a verb table + * + * @verb_table_bytes: verb table size in bytes + * @verb_table_data: verb table data + * @viddid: vendor/device to search for + * @verb_out: pointer to entry within table + * + * Returns size of the entry within the verb table, + * Returns 0 if the entry is not found + * + * The HDA verb table is composed of dwords. A set of 4 dwords is + * grouped together to form a "jack" descriptor. + * Bits 31:28 - Codec Address + * Bits 27:20 - NID + * Bits 19:8 - Verb ID + * Bits 7:0 - Payload + * + * coreboot groups different codec verb tables into a single table + * and prefixes each with a specific header consisting of 3 + * dword entries: + * 1 - Codec Vendor/Device ID + * 2 - Subsystem ID + * 3 - Number of jacks (groups of 4 dwords) for this codec + */ +static u32 hda_find_verb(u32 verb_table_bytes, + const u32 *verb_table_data, + u32 viddid, const u32 ** verb) +{ + int idx=0; + + while (idx < (verb_table_bytes / sizeof(u32))) { + u32 verb_size = 4 * verb_table_data[idx+2]; // in u32 + if (verb_table_data[idx] != viddid) { + idx += verb_size + 3; // skip verb + header + continue; + } + *verb = &verb_table_data[idx+3]; + return verb_size; + } + + /* Not all codecs need to load another verb */ + return 0; +} + +/** + * Write a supplied verb table + */ +int hda_codec_write(u32 base, u32 size, const u32 *data) +{ + int i; + + for (i = 0; i < size; i++) { + if (hda_wait_for_ready(base) < 0) + return -1; + + write32(base + HDA_IC_REG, data[i]); + + if (hda_wait_for_valid(base) < 0) + return -1; + } + + return 0; +} + +/** + * Initialize codec, then find the verb table and write it + */ +int hda_codec_init(u32 base, int addr, int verb_size, const u32 *verb_data) +{ + const u32 *verb; + u32 reg32, size; + int rc; + + printk(BIOS_DEBUG, "HDA: Initializing codec #%d\n", addr); + + if (!verb_size || !verb_data) { + printk(BIOS_DEBUG, "HDA: No verb list!\n"); + return -1; + } + + /* 1 */ + if (hda_wait_for_ready(base) < 0) { + printk(BIOS_DEBUG, " codec not ready.\n"); + return -1; + } + + reg32 = (addr << 28) | 0x000f0000; + write32(base + HDA_IC_REG, reg32); + + if (hda_wait_for_valid(base) < 0) { + printk(BIOS_DEBUG, " codec not valid.\n"); + return -1; + } + + /* 2 */ + reg32 = read32(base + HDA_IR_REG); + printk(BIOS_DEBUG, "HDA: codec viddid: %08x\n", reg32); + + size = hda_find_verb(verb_size, verb_data, reg32, &verb); + if (!size) { + printk(BIOS_DEBUG, "HDA: No verb table entry found\n"); + return -1; + } + + /* 3 */ + rc = hda_codec_write(base, size, verb); + + if (rc < 0) + printk(BIOS_DEBUG, "HDA: verb not loaded\n"); + else + printk(BIOS_DEBUG, "HDA: verb loaded.\n"); + + return rc; +} diff --git a/src/southbridge/intel/lynxpoint/hda_verb.h b/src/southbridge/intel/lynxpoint/hda_verb.h new file mode 100644 index 0000000000..8b3d27e1c2 --- /dev/null +++ b/src/southbridge/intel/lynxpoint/hda_verb.h @@ -0,0 +1,37 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef LYNXPOINT_HDA_VERB_H +#define LYNXPOINT_HDA_VERB_H + +#define HDA_GCAP_REG 0x00 +#define HDA_GCTL_REG 0x08 +#define HDA_GCTL_CRST (1 << 0) +#define HDA_STATESTS_REG 0x0e +#define HDA_IC_REG 0x60 +#define HDA_IR_REG 0x64 +#define HDA_ICII_REG 0x68 +#define HDA_ICII_BUSY (1 << 0) +#define HDA_ICII_VALID (1 << 1) + +int hda_codec_detect(u32 base); +int hda_codec_write(u32 base, u32 size, const u32 *data); +int hda_codec_init(u32 base, int addr, int verb_size, const u32 *verb_data); + +#endif -- cgit v1.2.3