From 087c4f2894a7481953127d181d49f99ebaf8af78 Mon Sep 17 00:00:00 2001 From: Matt DeVillier Date: Wed, 2 Dec 2020 15:35:34 -0600 Subject: mb/purism/librem_cnl: Use FMAP-based SPD cache Use a FMAP region to cache SPD data, providing improvements in boot time and detection of change in DIMM population (which FSP will sometimes fail to detect / fail to invalidate the MRC cache). Adapted from implementation used in google/hatch. Test: build/boot Librem Mini v2, verify SPD cache used, changes in DIMM population properly detected. Change-Id: I15cb9aa8b00d39d098a0f901aee026bac1161a80 Signed-off-by: Matt DeVillier Reviewed-on: https://review.coreboot.org/c/coreboot/+/48549 Reviewed-by: Angel Pons Tested-by: build bot (Jenkins) --- src/mainboard/purism/librem_cnl/Kconfig | 1 + src/mainboard/purism/librem_cnl/romstage.c | 137 ++++++++++++++++++++--------- 2 files changed, 95 insertions(+), 43 deletions(-) (limited to 'src') diff --git a/src/mainboard/purism/librem_cnl/Kconfig b/src/mainboard/purism/librem_cnl/Kconfig index 1d31ec659f..d0282ad31e 100644 --- a/src/mainboard/purism/librem_cnl/Kconfig +++ b/src/mainboard/purism/librem_cnl/Kconfig @@ -8,6 +8,7 @@ config BOARD_PURISM_BASEBOARD_LIBREM_CNL select INTEL_GMA_HAVE_VBT select NO_UART_ON_SUPERIO select SOC_INTEL_COMMON_BLOCK_HDA_VERB + select SPD_CACHE_IN_FMAP select SPD_READ_BY_WORD select USE_LEGACY_8254_TIMER diff --git a/src/mainboard/purism/librem_cnl/romstage.c b/src/mainboard/purism/librem_cnl/romstage.c index b7c57ee379..fd3154f431 100644 --- a/src/mainboard/purism/librem_cnl/romstage.c +++ b/src/mainboard/purism/librem_cnl/romstage.c @@ -1,55 +1,106 @@ /* SPDX-License-Identifier: GPL-2.0-only */ +#include #include #include +#include +#include #include "variant.h" -static const struct cnl_mb_cfg memcfg = { - - /* Parameters required to access SPD for CH0D0/CH0D1/CH1D0/CH1D1. */ - .spd[0] = { - .read_type = READ_SMBUS, - .spd_spec = {.spd_smbus_address = 0xa0}, - }, - .spd[1] = {.read_type = NOT_EXISTING}, - .spd[2] = { - .read_type = READ_SMBUS, - .spd_spec = {.spd_smbus_address = 0xa4}, - }, - .spd[3] = {.read_type = NOT_EXISTING}, - - /* - * Rcomp resistor values. These values represent the resistance in - * ohms of the three rcomp resistors attached to the DDR_COMP_0, - * DDR_COMP_1, and DDR_COMP_2 pins on the DRAM. - */ - .rcomp_resistor = { 121, 81, 100 }, - - /* Rcomp target values */ - .rcomp_targets = { 100, 40, 20, 20, 26 }, - - /* - * Indicates whether memory is interleaved. - * Set to 1 for an interleaved design, - * set to 0 for non-interleaved design. - */ - .dq_pins_interleaved = 1, - - /* - * VREF_CA configuration. - * Set to 0 VREF_CA goes to both CH_A and CH_B, - * set to 1 VREF_CA goes to CH_A and VREF_DQ_A goes to CH_B, - * set to 2 VREF_CA goes to CH_A and VREF_DQ_B goes to CH_B. - */ - .vref_ca_config = 2, - - /* Early Command Training */ - .ect = 0, -}; - void mainboard_memory_init_params(FSPM_UPD *memupd) { FSP_M_CONFIG *mem_cfg = &memupd->FspmConfig; + + struct cnl_mb_cfg memcfg = { + + /* + * Rcomp resistor values. These values represent the resistance in + * ohms of the three rcomp resistors attached to the DDR_COMP_0, + * DDR_COMP_1, and DDR_COMP_2 pins on the DRAM. + */ + .rcomp_resistor = { 121, 81, 100 }, + + /* Rcomp target values */ + .rcomp_targets = { 100, 40, 20, 20, 26 }, + + /* + * Indicates whether memory is interleaved. + * Set to 1 for an interleaved design, + * set to 0 for non-interleaved design. + */ + .dq_pins_interleaved = 1, + + /* + * VREF_CA configuration. + * Set to 0 VREF_CA goes to both CH_A and CH_B, + * set to 1 VREF_CA goes to CH_A and VREF_DQ_A goes to CH_B, + * set to 2 VREF_CA goes to CH_A and VREF_DQ_B goes to CH_B. + */ + .vref_ca_config = 2, + + /* Early Command Training */ + .ect = 0, + }; + + + /* Read spd block to get memory config */ + struct spd_block blk = { + .addr_map = { 0x50, 0x52, }, + }; + + uint8_t *spd_cache; + size_t spd_cache_sz; + bool need_update_cache = false; + bool dimm_changed = true; + + /* load spd cache from RW_SPD_CACHE */ + if (load_spd_cache(&spd_cache, &spd_cache_sz) == CB_SUCCESS) { + if (!spd_cache_is_valid(spd_cache, spd_cache_sz)) { + printk(BIOS_WARNING, "Invalid SPD cache\n"); + } else { + dimm_changed = check_if_dimm_changed(spd_cache, &blk); + if (dimm_changed && memupd->FspmArchUpd.NvsBufferPtr != NULL) { + /* Set mrc_cache as invalid */ + printk(BIOS_INFO, "Set mrc_cache as invalid\n"); + memupd->FspmArchUpd.NvsBufferPtr = NULL; + } + } + need_update_cache = true; + } + + if (!dimm_changed) { + spd_fill_from_cache(spd_cache, &blk); + } else { + /* Access memory info through SMBUS. */ + get_spd_smbus(&blk); + + if (need_update_cache && update_spd_cache(&blk) == CB_ERR) + printk(BIOS_WARNING, "update SPD cache failed\n"); + } + + if (blk.spd_array[0] == NULL) { + memcfg.spd[0].read_type = NOT_EXISTING; + } else { + memcfg.spd[0].read_type = READ_SPD_MEMPTR; + memcfg.spd[0].spd_spec.spd_data_ptr_info.spd_data_len = blk.len; + memcfg.spd[0].spd_spec.spd_data_ptr_info.spd_data_ptr = + (uintptr_t)blk.spd_array[0]; + } + + memcfg.spd[1].read_type = NOT_EXISTING; + + if (blk.spd_array[1] == NULL) { + memcfg.spd[2].read_type = NOT_EXISTING; + } else { + memcfg.spd[2].read_type = READ_SPD_MEMPTR; + memcfg.spd[2].spd_spec.spd_data_ptr_info.spd_data_len = blk.len; + memcfg.spd[2].spd_spec.spd_data_ptr_info.spd_data_ptr = + (uintptr_t)blk.spd_array[1]; + } + + memcfg.spd[3].read_type = NOT_EXISTING; + dump_spd_info(&blk); + cannonlake_memcfg_init(mem_cfg, &memcfg); variant_memory_init_params(mem_cfg); } -- cgit v1.2.3