From 081b66951f04bb67ad2d04750212a45fc0c24e90 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ky=C3=B6sti=20M=C3=A4lkki?= Date: Wed, 30 Aug 2017 12:01:08 +0300 Subject: mainboard/lippert: Refactor SEMA watchdog message MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit It's too critical to ignore when sending the message on SMBus fails, so allow for a fair amount of retries. Failure here causes watchdog to do hard reset later. Move it out of mainboard.c as we need to call this early in romstage while we are debugging. Change-Id: I1006b079269d6dd44de630db7a5694124af2f974 Signed-off-by: Kyösti Mälkki Reviewed-on: https://review.coreboot.org/21316 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin --- src/mainboard/lippert/frontrunner-af/Makefile.inc | 4 + src/mainboard/lippert/frontrunner-af/mainboard.c | 33 ++------- src/mainboard/lippert/frontrunner-af/sema.c | 89 +++++++++++++++++++++++ src/mainboard/lippert/frontrunner-af/sema.h | 23 ++++++ src/mainboard/lippert/toucan-af/Makefile.inc | 4 + src/mainboard/lippert/toucan-af/mainboard.c | 34 ++------- 6 files changed, 132 insertions(+), 55 deletions(-) create mode 100644 src/mainboard/lippert/frontrunner-af/sema.c create mode 100644 src/mainboard/lippert/frontrunner-af/sema.h (limited to 'src') diff --git a/src/mainboard/lippert/frontrunner-af/Makefile.inc b/src/mainboard/lippert/frontrunner-af/Makefile.inc index ba56286636..3ea57cd1e3 100644 --- a/src/mainboard/lippert/frontrunner-af/Makefile.inc +++ b/src/mainboard/lippert/frontrunner-af/Makefile.inc @@ -27,3 +27,7 @@ romstage-y += OemCustomize.c ramstage-y += buildOpts.c ramstage-y += BiosCallOuts.c ramstage-y += OemCustomize.c + +# Minimal SEMA watchdog support +romstage-y += sema.c +ramstage-y += sema.c diff --git a/src/mainboard/lippert/frontrunner-af/mainboard.c b/src/mainboard/lippert/frontrunner-af/mainboard.c index a846528f5b..1212764cae 100644 --- a/src/mainboard/lippert/frontrunner-af/mainboard.c +++ b/src/mainboard/lippert/frontrunner-af/mainboard.c @@ -27,6 +27,7 @@ #include "SBPLATFORM.h" #include "OEM.h" /* SMBUS0_BASE_ADDRESS */ #include +#include "sema.h" /* Init SIO GPIOs. */ #define SIO_RUNTIME_BASE 0x0E00 @@ -59,28 +60,6 @@ static const u16 sio_init_table[] = { // hi = offset, lo = value 0x5780, // GP65: USB power 4/5 = open drain output }; -/* Write data block to slave on SMBUS0. */ -#define SMB0_STATUS ((SMBUS0_BASE_ADDRESS) + 0) -#define SMB0_CONTROL ((SMBUS0_BASE_ADDRESS) + 2) -#define SMB0_HOSTCMD ((SMBUS0_BASE_ADDRESS) + 3) -#define SMB0_ADDRESS ((SMBUS0_BASE_ADDRESS) + 4) -#define SMB0_DATA0 ((SMBUS0_BASE_ADDRESS) + 5) -#define SMB0_BLOCKDATA ((SMBUS0_BASE_ADDRESS) + 7) -static int smb_write_blk(u8 slave, u8 command, u8 length, const u8 *data) -{ - __outbyte(SMB0_STATUS, 0x1E); // clear error status - __outbyte(SMB0_ADDRESS, slave & ~1); // slave addr + direction = out - __outbyte(SMB0_HOSTCMD, command); // or destination offset - __outbyte(SMB0_DATA0, length); // sent before data - __inbyte(SMB0_CONTROL); // reset block data array - while (length--) - __outbyte(SMB0_BLOCKDATA, *(data++)); - __outbyte(SMB0_CONTROL, 0x54); // execute block write, no IRQ - - while (__inbyte(SMB0_STATUS) == 0x01); // busy, no errors - return __inbyte(SMB0_STATUS) ^ 0x02; // 0x02 = completed, no errors -} - static void init(struct device *dev) { volatile u8 *spi_base; // base addr of Hudson's SPI host controller @@ -126,11 +105,11 @@ static void init(struct device *dev) /* Notify the SMC we're alive and kicking, or after a while it will * effect a power cycle and switch to the alternate BIOS chip. - * Should be done as late as possible. */ - printk(BIOS_INFO, "Sending BIOS alive message\n"); - const u8 i_am_alive[] = { 0x03 }; - if ((i = smb_write_blk(0x50, 0x25, sizeof(i_am_alive), i_am_alive))) - printk(BIOS_ERR, "smb_write_blk failed: %d\n", i); + * Should be done as late as possible. + * Failure here does not matter if watchdog was already disabled, + * by configuration or previous boot, so ignore return value. + */ + sema_send_alive(); printk(BIOS_DEBUG, CONFIG_MAINBOARD_PART_NUMBER " EXIT %s\n", __func__); } diff --git a/src/mainboard/lippert/frontrunner-af/sema.c b/src/mainboard/lippert/frontrunner-af/sema.c new file mode 100644 index 0000000000..3a4994de1d --- /dev/null +++ b/src/mainboard/lippert/frontrunner-af/sema.c @@ -0,0 +1,89 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include "OEM.h" /* SMBUS0_BASE_ADDRESS */ + +#include "Porting.h" +#include "AGESA.h" +#include +#include "sema.h" + +/* Write data block to slave on SMBUS0. */ +#define SMB0_STATUS ((SMBUS0_BASE_ADDRESS) + 0) +#define SMB0_CONTROL ((SMBUS0_BASE_ADDRESS) + 2) +#define SMB0_HOSTCMD ((SMBUS0_BASE_ADDRESS) + 3) +#define SMB0_ADDRESS ((SMBUS0_BASE_ADDRESS) + 4) +#define SMB0_DATA0 ((SMBUS0_BASE_ADDRESS) + 5) +#define SMB0_BLOCKDATA ((SMBUS0_BASE_ADDRESS) + 7) + +static int smb_write_blk(u8 slave, u8 command, u8 length, const u8 *data) +{ + __outbyte(SMB0_STATUS, 0x1E); // clear error status + __outbyte(SMB0_ADDRESS, slave & ~1); // slave addr + direction = out + __outbyte(SMB0_HOSTCMD, command); // or destination offset + __outbyte(SMB0_DATA0, length); // sent before data + __inbyte(SMB0_CONTROL); // reset block data array + while (length--) + __outbyte(SMB0_BLOCKDATA, *(data++)); + __outbyte(SMB0_CONTROL, 0x54); // execute block write, no IRQ + + while (__inbyte(SMB0_STATUS) == 0x01); // busy, no errors + return __inbyte(SMB0_STATUS) ^ 0x02; // 0x02 = completed, no errors +} + +#define RETRY_COUNT 100 + +/* Use of mdelay() here would fail in romstage. */ +static void early_mdelay(int msecs) +{ + while (msecs--) { + int i; + for (i = 0; i < 1000; i++) + inb(0x80); + } +} + +int sema_send_alive(void) +{ + const u8 i_am_alive[] = { 0x03 }; + int i, j = 0; + char one_spd_byte; + + /* Fake read just to setup SMBUS controller. */ + if (ENV_ROMSTAGE) + smbus_readSpd(0xa0, &one_spd_byte, 1); + + /* Notify the SMC we're alive and kicking, or after a while it will + * effect a power cycle and switch to the alternate BIOS chip. + * Should be done as late as possible. */ + + printk(BIOS_CRIT, "Sending BIOS alive message... "); + + do { + i = smb_write_blk(0x50, 0x25, sizeof(i_am_alive), i_am_alive); + early_mdelay(25); + } while ((++j < RETRY_COUNT) && i); + + if (j == RETRY_COUNT) { + printk(BIOS_INFO, "failed\n"); + return -1; + } + printk(BIOS_CRIT, "took %d tries\n", j); + + return 0; +} diff --git a/src/mainboard/lippert/frontrunner-af/sema.h b/src/mainboard/lippert/frontrunner-af/sema.h new file mode 100644 index 0000000000..ea8ee31e4e --- /dev/null +++ b/src/mainboard/lippert/frontrunner-af/sema.h @@ -0,0 +1,23 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __LIPPERT_SEMA_H__ +#define __LIPPERT_SEMA_H__ + +/* Signal SEMA watchdog a successful boot. + * Returns < 0 is SMBus message failed after + * several retries. + */ +int sema_send_alive(void); + +#endif diff --git a/src/mainboard/lippert/toucan-af/Makefile.inc b/src/mainboard/lippert/toucan-af/Makefile.inc index ba56286636..1080c64ded 100644 --- a/src/mainboard/lippert/toucan-af/Makefile.inc +++ b/src/mainboard/lippert/toucan-af/Makefile.inc @@ -27,3 +27,7 @@ romstage-y += OemCustomize.c ramstage-y += buildOpts.c ramstage-y += BiosCallOuts.c ramstage-y += OemCustomize.c + +# Minimal SEMA watchdog support +romstage-y += ../frontrunner-af/sema.c +ramstage-y += ../frontrunner-af/sema.c diff --git a/src/mainboard/lippert/toucan-af/mainboard.c b/src/mainboard/lippert/toucan-af/mainboard.c index 7647ebee4f..fa5eb41874 100644 --- a/src/mainboard/lippert/toucan-af/mainboard.c +++ b/src/mainboard/lippert/toucan-af/mainboard.c @@ -27,33 +27,11 @@ #include "SBPLATFORM.h" #include "OEM.h" /* SMBUS0_BASE_ADDRESS */ #include - -/* Write data block to slave on SMBUS0. */ -#define SMB0_STATUS ((SMBUS0_BASE_ADDRESS) + 0) -#define SMB0_CONTROL ((SMBUS0_BASE_ADDRESS) + 2) -#define SMB0_HOSTCMD ((SMBUS0_BASE_ADDRESS) + 3) -#define SMB0_ADDRESS ((SMBUS0_BASE_ADDRESS) + 4) -#define SMB0_DATA0 ((SMBUS0_BASE_ADDRESS) + 5) -#define SMB0_BLOCKDATA ((SMBUS0_BASE_ADDRESS) + 7) -static int smb_write_blk(u8 slave, u8 command, u8 length, const u8 *data) -{ - __outbyte(SMB0_STATUS, 0x1E); // clear error status - __outbyte(SMB0_ADDRESS, slave & ~1); // slave addr + direction = out - __outbyte(SMB0_HOSTCMD, command); // or destination offset - __outbyte(SMB0_DATA0, length); // sent before data - __inbyte(SMB0_CONTROL); // reset block data array - while (length--) - __outbyte(SMB0_BLOCKDATA, *(data++)); - __outbyte(SMB0_CONTROL, 0x54); // execute block write, no IRQ - - while (__inbyte(SMB0_STATUS) == 0x01); // busy, no errors - return __inbyte(SMB0_STATUS) ^ 0x02; // 0x02 = completed, no errors -} +#include "mainboard/lippert/frontrunner-af/sema.h" static void init(struct device *dev) { volatile u8 *spi_base; // base addr of Hudson's SPI host controller - int i; printk(BIOS_DEBUG, CONFIG_MAINBOARD_PART_NUMBER " ENTER %s\n", __func__); /* Init Hudson GPIOs. */ @@ -93,11 +71,11 @@ static void init(struct device *dev) /* Notify the SMC we're alive and kicking, or after a while it will * effect a power cycle and switch to the alternate BIOS chip. - * Should be done as late as possible. */ - printk(BIOS_INFO, "Sending BIOS alive message\n"); - const u8 i_am_alive[] = { 0x03 }; //bit2 = SEL_DP0: 0 = DDI2, 1 = LVDS - if ((i = smb_write_blk(0x50, 0x25, sizeof(i_am_alive), i_am_alive))) - printk(BIOS_ERR, "smb_write_blk failed: %d\n", i); + * Should be done as late as possible. + * Failure here does not matter if watchdog was already disabled, + * by configuration or previous boot, so ignore return value. + */ + sema_send_alive(); printk(BIOS_DEBUG, CONFIG_MAINBOARD_PART_NUMBER " EXIT %s\n", __func__); } -- cgit v1.2.3