From 04bfbf50950df6ef78aa354698b226928a4024bc Mon Sep 17 00:00:00 2001 From: Gabe Black Date: Wed, 22 Jan 2014 20:50:27 -0800 Subject: pit: Rename pit to peach_pit. The name pit goes by in many places in chromeos is peach_pit, where peach is the base name and pit is the name of this particular variant. To make it easier to work with within chromeos and to make the board names a little less ambiguous, this change renames the pit board to peach_pit, and from Pit to Peach Pit. Change-Id: I51c89ba3785cf4cb9769a989b1cac71bcd1b0a05 Signed-off-by: Gabe Black Reviewed-on: https://chromium-review.googlesource.com/183552 Reviewed-by: David Hendricks Commit-Queue: Gabe Black Tested-by: Gabe Black (cherry picked from commit cbbe1e9f04e34436a1bbae28628e0b5630d41054) Signed-off-by: Isaac Christensen Reviewed-on: http://review.coreboot.org/6928 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich Reviewed-by: Paul Menzel --- src/mainboard/google/Kconfig | 6 +- src/mainboard/google/peach_pit/Kconfig | 53 +++ src/mainboard/google/peach_pit/Makefile.inc | 28 ++ src/mainboard/google/peach_pit/chromeos.c | 101 ++++++ src/mainboard/google/peach_pit/devicetree.cb | 33 ++ src/mainboard/google/peach_pit/mainboard.c | 498 +++++++++++++++++++++++++++ src/mainboard/google/peach_pit/memory.c | 116 +++++++ src/mainboard/google/peach_pit/romstage.c | 279 +++++++++++++++ src/mainboard/google/peach_pit/wakeup.c | 28 ++ src/mainboard/google/pit/Kconfig | 53 --- src/mainboard/google/pit/Makefile.inc | 28 -- src/mainboard/google/pit/chromeos.c | 101 ------ src/mainboard/google/pit/devicetree.cb | 33 -- src/mainboard/google/pit/mainboard.c | 498 --------------------------- src/mainboard/google/pit/memory.c | 116 ------- src/mainboard/google/pit/romstage.c | 279 --------------- src/mainboard/google/pit/wakeup.c | 28 -- 17 files changed, 1139 insertions(+), 1139 deletions(-) create mode 100644 src/mainboard/google/peach_pit/Kconfig create mode 100644 src/mainboard/google/peach_pit/Makefile.inc create mode 100644 src/mainboard/google/peach_pit/chromeos.c create mode 100644 src/mainboard/google/peach_pit/devicetree.cb create mode 100644 src/mainboard/google/peach_pit/mainboard.c create mode 100644 src/mainboard/google/peach_pit/memory.c create mode 100644 src/mainboard/google/peach_pit/romstage.c create mode 100644 src/mainboard/google/peach_pit/wakeup.c delete mode 100644 src/mainboard/google/pit/Kconfig delete mode 100644 src/mainboard/google/pit/Makefile.inc delete mode 100644 src/mainboard/google/pit/chromeos.c delete mode 100644 src/mainboard/google/pit/devicetree.cb delete mode 100644 src/mainboard/google/pit/mainboard.c delete mode 100644 src/mainboard/google/pit/memory.c delete mode 100644 src/mainboard/google/pit/romstage.c delete mode 100644 src/mainboard/google/pit/wakeup.c (limited to 'src') diff --git a/src/mainboard/google/Kconfig b/src/mainboard/google/Kconfig index 38588c77a1..415b04f071 100644 --- a/src/mainboard/google/Kconfig +++ b/src/mainboard/google/Kconfig @@ -37,10 +37,10 @@ config BOARD_GOOGLE_PANTHER bool "Panther" config BOARD_GOOGLE_PARROT bool "Parrot" +config BOARD_GOOGLE_PEACH_PIT + bool "Peach Pit" config BOARD_GOOGLE_PEPPY bool "Peppy" -config BOARD_GOOGLE_PIT - bool "Pit" config BOARD_GOOGLE_RAMBI bool "Rambi" config BOARD_GOOGLE_SAMUS @@ -62,8 +62,8 @@ source "src/mainboard/google/nyan/Kconfig" source "src/mainboard/google/nyan_big/Kconfig" source "src/mainboard/google/panther/Kconfig" source "src/mainboard/google/parrot/Kconfig" +source "src/mainboard/google/peach_pit/Kconfig" source "src/mainboard/google/peppy/Kconfig" -source "src/mainboard/google/pit/Kconfig" source "src/mainboard/google/rambi/Kconfig" source "src/mainboard/google/samus/Kconfig" source "src/mainboard/google/slippy/Kconfig" diff --git a/src/mainboard/google/peach_pit/Kconfig b/src/mainboard/google/peach_pit/Kconfig new file mode 100644 index 0000000000..66ab6a7bb5 --- /dev/null +++ b/src/mainboard/google/peach_pit/Kconfig @@ -0,0 +1,53 @@ +## +## This file is part of the coreboot project. +## +## Copyright 2013 Google Inc. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +if BOARD_GOOGLE_PEACH_PIT + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_SAMSUNG_EXYNOS5420 + select EC_GOOGLE_CHROMEEC + select EC_GOOGLE_CHROMEEC_SPI + select BOARD_ROMSIZE_KB_4096 + select MAINBOARD_HAS_CHROMEOS + select MAINBOARD_HAS_NATIVE_VGA_INIT + select MAINBOARD_DO_NATIVE_VGA_INIT + select DRIVER_PARADE_PS8625 + +config MAINBOARD_DIR + string + default google/peach_pit + +config MAINBOARD_PART_NUMBER + string + default "Peach Pit" + +config DRAM_SIZE_MB + int + default 2048 + +config EC_GOOGLE_CHROMEEC_SPI_BUS + hex + default 2 + +config UART_FOR_CONSOLE + int + default 3 + +endif # BOARD_GOOGLE_PEACH_PIT diff --git a/src/mainboard/google/peach_pit/Makefile.inc b/src/mainboard/google/peach_pit/Makefile.inc new file mode 100644 index 0000000000..df9b797367 --- /dev/null +++ b/src/mainboard/google/peach_pit/Makefile.inc @@ -0,0 +1,28 @@ +## +## This file is part of the coreboot project. +## +## Copyright 2012 Google Inc. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +bootblock-y += wakeup.c + +romstage-y += memory.c +romstage-y += romstage.c +romstage-y += wakeup.c +romstage-y += chromeos.c + +ramstage-y += mainboard.c +ramstage-y += chromeos.c diff --git a/src/mainboard/google/peach_pit/chromeos.c b/src/mainboard/google/peach_pit/chromeos.c new file mode 100644 index 0000000000..7b0807c71a --- /dev/null +++ b/src/mainboard/google/peach_pit/chromeos.c @@ -0,0 +1,101 @@ +/* + * This file is part of the coreboot project. + * + * Copyright 2013 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +void fill_lb_gpios(struct lb_gpios *gpios) +{ + int count = 0; + + /* Write Protect: active low */ + gpios->gpios[count].port = EXYNOS5_GPX3; + gpios->gpios[count].polarity = ACTIVE_LOW; + gpios->gpios[count].value = gpio_get_value(GPIO_X30); // WP_GPIO + strncpy((char *)gpios->gpios[count].name, "write protect", + GPIO_MAX_NAME_LENGTH); + count++; + + /* Recovery: active low */ + gpios->gpios[count].port = -1; + gpios->gpios[count].polarity = ACTIVE_HIGH; + gpios->gpios[count].value = get_recovery_mode_switch(); + strncpy((char *)gpios->gpios[count].name, "recovery", + GPIO_MAX_NAME_LENGTH); + count++; + + /* Lid: active high */ + gpios->gpios[count].port = EXYNOS5_GPX3; + gpios->gpios[count].polarity = ACTIVE_HIGH; + gpios->gpios[count].value = gpio_get_value(GPIO_X34); // LID_GPIO + strncpy((char *)gpios->gpios[count].name, "lid", GPIO_MAX_NAME_LENGTH); + count++; + + /* Power: virtual GPIO active low */ + gpios->gpios[count].port = EXYNOS5_GPX1; + gpios->gpios[count].polarity = ACTIVE_LOW; + gpios->gpios[count].value = + gpio_get_value(GPIO_X12); // POWER_GPIO + strncpy((char *)gpios->gpios[count].name, "power", + GPIO_MAX_NAME_LENGTH); + count++; + + /* Developer: virtual GPIO active high */ + gpios->gpios[count].port = -1; + gpios->gpios[count].polarity = ACTIVE_HIGH; + gpios->gpios[count].value = get_developer_mode_switch(); + strncpy((char *)gpios->gpios[count].name, "developer", + GPIO_MAX_NAME_LENGTH); + count++; + + gpios->size = sizeof(*gpios) + (count * sizeof(struct lb_gpio)); + gpios->count = count; + + printk(BIOS_ERR, "Added %d GPIOS size %d\n", count, gpios->size); +} + +int get_developer_mode_switch(void) +{ + return 0; +} + +int get_recovery_mode_switch(void) +{ + uint32_t ec_events; + + /* The GPIO is active low. */ + if (!gpio_get_value(GPIO_X07)) // RECMODE_GPIO + return 1; + + ec_events = google_chromeec_get_events_b(); + return !!(ec_events & + EC_HOST_EVENT_MASK(EC_HOST_EVENT_KEYBOARD_RECOVERY)); +} + +int get_write_protect_state(void) +{ + return !gpio_get_value(GPIO_X30); +} diff --git a/src/mainboard/google/peach_pit/devicetree.cb b/src/mainboard/google/peach_pit/devicetree.cb new file mode 100644 index 0000000000..568daf86ef --- /dev/null +++ b/src/mainboard/google/peach_pit/devicetree.cb @@ -0,0 +1,33 @@ +## +## This file is part of the coreboot project. +## +## Copyright 2012 Google Inc. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +chip soc/samsung/exynos5420 + device cpu_cluster 0 on end + register "xres" = "1366" + register "yres" = "768" + register "framebuffer_bits_per_pixel" = "16" + # complex magic timing! + register "clkval_f" = "2" + register "upper_margin" = "14" + register "lower_margin" = "3" + register "vsync" = "5" + register "left_margin" = "80" + register "right_margin" = "48" + register "hsync" = "32" +end diff --git a/src/mainboard/google/peach_pit/mainboard.c b/src/mainboard/google/peach_pit/mainboard.c new file mode 100644 index 0000000000..1fb441d1ca --- /dev/null +++ b/src/mainboard/google/peach_pit/mainboard.c @@ -0,0 +1,498 @@ +/* + * This file is part of the coreboot project. + * + * Copyright 2013 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* convenient shorthand (in MB) */ +#define DRAM_START (CONFIG_SYS_SDRAM_BASE >> 20) +#define DRAM_SIZE CONFIG_DRAM_SIZE_MB + +/* Arbitrary range of DMA memory for depthcharge's drivers */ +#define DMA_START (0x77300000) +#define DMA_SIZE (0x00100000) + +static struct edid edid = { + .ha = 1366, + .va = 768, + .framebuffer_bits_per_pixel = 16, + .x_resolution = 1366, + .y_resolution = 768, + .bytes_per_line = 2 * 1366 +}; + +/* from the fdt */ +static struct vidinfo vidinfo = { + .vl_freq = 60, + .vl_col = 1366, + .vl_row = 768, + .vl_width = 1366, + .vl_height = 768, + .vl_clkp = 1, + .vl_dp = 1, + .vl_bpix = 4, + .vl_hspw = 32, + .vl_hbpd = 40, + .vl_hfpd = 40, + .vl_vspw = 6, + .vl_vbpd = 10, + .vl_vfpd = 12, + .vl_cmd_allow_len = 0xf, + .win_id = 3, + .dp_enabled = 1, + .dual_lcd_enabled = 0, + .interface_mode = FIMD_RGB_INTERFACE, +}; + +static unsigned char panel_edid[] = { + 0x00,0xff,0xff,0xff,0xff,0xff,0xff,0x00, + 0x06,0xaf,0x5c,0x31,0x00,0x00,0x00,0x00, + 0x00,0x16,0x01,0x03,0x80,0x1a,0x0e,0x78, + 0x0a,0x99,0x85,0x95,0x55,0x56,0x92,0x28, + 0x22,0x50,0x54,0x00,0x00,0x00,0x01,0x01, + 0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01, + 0x01,0x01,0x01,0x01,0x01,0x01,0xa3,0x1b, + 0x56,0x7e,0x50,0x00,0x16,0x30,0x30,0x20, + 0x36,0x00,0x00,0x90,0x10,0x00,0x00,0x18, + 0x6d,0x12,0x56,0x7e,0x50,0x00,0x16,0x30, + 0x30,0x20,0x36,0x00,0x00,0x90,0x10,0x00, + 0x00,0x18,0x00,0x00,0x00,0xfe,0x00,0x41, + 0x55,0x4f,0x0a,0x20,0x20,0x20,0x20,0x20, + 0x20,0x20,0x20,0x20,0x00,0x00,0x00,0xfe, + 0x00,0x42,0x31,0x31,0x36,0x58,0x57,0x30, + 0x33,0x20,0x56,0x31,0x20,0x0a,0x00,0x3d, + 0x00,0xc0,0x00,0x00,0x27,0xfd,0x00,0x20, + 0x02,0x59,0x07,0x00,0x64,0x3e,0x07,0x02, + 0x00,0x00,0xcd,0x12,0x59,0xff,0x10,0x03, + 0x00,0x00,0x00,0x00,0x64,0x00,0x00,0x00, + 0x00,0x00,0x00,0x00,0x18,0x00,0x00,0x00, + 0x00,0x00,0x00,0x00,0x05,0x00,0x00,0x00, + 0x9c,0x3f,0x07,0x02,0x31,0xf9,0x00,0x20, + 0x59,0xff,0x10,0x03,0x00,0x00,0x00,0x00, + 0xbc,0x3e,0x07,0x02,0xc0,0x9b,0x01,0x20, + 0x00,0x00,0x00,0x00,0xdb,0xf8,0x00,0x20, + 0x98,0x3e,0x07,0x02,0x8b,0xaf,0x00,0x20, + 0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0xe5,0xcd,0x16,0x00,0xe9,0xcd,0x16,0x00, + 0xe8,0x03,0x00,0x00,0x6c,0x55,0x01,0x20, + 0x2c,0x01,0x00,0x00,0x85,0xbb,0x00,0x20, + 0xe8,0x03,0x00,0x00,0xe9,0xcd,0x16,0x00, +}; + +static const struct parade_write parade_writes[] = { + { 0x02, 0xa1, 0x01 }, /* HPD low */ + /* + * SW setting + * [1:0] SW output 1.2V voltage is lower to 96% + */ + { 0x04, 0x14, 0x01 }, + /* + * RCO SS setting + * [5:4] = b01 0.5%, b10 1%, b11 1.5% + */ + { 0x04, 0xe3, 0x20 }, + { 0x04, 0xe2, 0x80 }, /* [7] RCO SS enable */ + /* + * RPHY Setting + * [3:2] CDR tune wait cycle before + * measure for fine tune b00: 1us, + * 01: 0.5us, 10:2us, 11:4us. + */ + { 0x04, 0x8a, 0x0c }, + { 0x04, 0x89, 0x08 }, /* [3] RFD always on */ + /* + * CTN lock in/out: + * 20000ppm/80000ppm. Lock out 2 + * times. + */ + { 0x04, 0x71, 0x2d }, + /* + * 2.7G CDR settings + * NOF=40LSB for HBR CDR setting + */ + { 0x04, 0x7d, 0x07 }, + { 0x04, 0x7b, 0x00 }, /* [1:0] Fmin=+4bands */ + { 0x04, 0x7a, 0xfd }, /* [7:5] DCO_FTRNG=+-40% */ + /* + * 1.62G CDR settings + * [5:2]NOF=64LSB [1:0]DCO scale is 2/5 + */ + { 0x04, 0xc0, 0x12 }, + { 0x04, 0xc1, 0x92 }, /* Gitune=-37% */ + { 0x04, 0xc2, 0x1c }, /* Fbstep=100% */ + { 0x04, 0x32, 0x80 }, /* [7] LOS signal disable */ + /* + * RPIO Setting + * [7:4] LVDS driver bias current : + * 75% (250mV swing) + */ + { 0x04, 0x00, 0xb0 }, + /* + * [7:6] Right-bar GPIO output strength is 8mA + */ + { 0x04, 0x15, 0x40 }, + /* EQ Training State Machine Setting */ + { 0x04, 0x54, 0x10 }, /* RCO calibration start */ + /* [4:0] MAX_LANE_COUNT set to one lane */ + { 0x01, 0x02, 0x81 }, + /* [4:0] LANE_COUNT_SET set to one lane */ + { 0x01, 0x21, 0x81 }, + { 0x00, 0x52, 0x20 }, + { 0x00, 0xf1, 0x03 }, /* HPD CP toggle enable */ + { 0x00, 0x62, 0x41 }, + /* Counter number, add 1ms counter delay */ + { 0x00, 0xf6, 0x01 }, + /* + * [6]PWM function control by + * DPCD0040f[7], default is PWM + * block always works. + */ + { 0x00, 0x77, 0x06 }, + /* + * 04h Adjust VTotal tolerance to + * fix the 30Hz no display issue + */ + { 0x00, 0x4c, 0x04 }, + /* DPCD00400='h00, Parade OUI = 'h001cf8 */ + { 0x01, 0xc0, 0x00 }, + { 0x01, 0xc1, 0x1c }, /* DPCD00401='h1c */ + { 0x01, 0xc2, 0xf8 }, /* DPCD00402='hf8 */ + /* + * DPCD403~408 = ASCII code + * D2SLV5='h4432534c5635 + */ + { 0x01, 0xc3, 0x44 }, + { 0x01, 0xc4, 0x32 }, /* DPCD404 */ + { 0x01, 0xc5, 0x53 }, /* DPCD405 */ + { 0x01, 0xc6, 0x4c }, /* DPCD406 */ + { 0x01, 0xc7, 0x56 }, /* DPCD407 */ + { 0x01, 0xc8, 0x35 }, /* DPCD408 */ + /* + * DPCD40A, Initial Code major revision + * '01' + */ + { 0x01, 0xca, 0x01 }, + /* DPCD40B, Initial Code minor revision '05' */ + { 0x01, 0xcb, 0x05 }, + /* DPCD720, Select external PWM */ + { 0x01, 0xa5, 0x80 }, + /* + * Set LVDS output as 6bit-VESA mapping, + * single LVDS channel + */ + { 0x01, 0xcc, 0x13 }, + /* Enable SSC set by register */ + { 0x02, 0xb1, 0x20 }, + /* + * Set SSC enabled and +/-1% central + * spreading + */ + { 0x04, 0x10, 0x16 }, + /* MPU Clock source: LC => RCO */ + { 0x04, 0x59, 0x60 }, + { 0x04, 0x54, 0x14 }, /* LC -> RCO */ + { 0x02, 0xa1, 0x91 } /* HPD high */ +}; + +/* TODO: transplanted DP stuff, clean up once we have something that works */ +static enum exynos5_gpio_pin dp_pd_l = GPIO_X35; /* active low */ +static enum exynos5_gpio_pin dp_rst_l = GPIO_Y77; /* active low */ +static enum exynos5_gpio_pin dp_hpd = GPIO_X26; /* active high */ +static enum exynos5_gpio_pin bl_pwm = GPIO_B20; /* active high */ +static enum exynos5_gpio_pin bl_en = GPIO_X22; /* active high */ + +static void parade_dp_bridge_setup(void) +{ + int i; + + gpio_set_value(dp_pd_l, 1); + gpio_cfg_pin(dp_pd_l, GPIO_OUTPUT); + gpio_set_pull(dp_pd_l, GPIO_PULL_NONE); + + gpio_set_value(dp_rst_l, 0); + gpio_cfg_pin(dp_rst_l, GPIO_OUTPUT); + gpio_set_pull(dp_rst_l, GPIO_PULL_NONE); + udelay(10); + gpio_set_value(dp_rst_l, 1); + + + gpio_set_pull(dp_hpd, GPIO_PULL_NONE); + gpio_cfg_pin(dp_hpd, GPIO_INPUT); + + /* De-assert PD (and possibly RST) to power up the bridge. */ + gpio_set_value(dp_pd_l, 1); + gpio_set_value(dp_rst_l, 1); + + /* Hang around for the bridge to come up. */ + mdelay(40); + + /* Configure the bridge chip. */ + exynos_pinmux_i2c7(); + i2c_init(7, 100000, 0x00); + + parade_ps8625_bridge_setup(7, 0x48, parade_writes, + ARRAY_SIZE(parade_writes)); + /* Spin until the display is ready. + * It's quite important to try really hard to get the display up, + * so be generous. It will typically be ready in only 5 ms. and + * we're out of here. + * If it's not ready after a second, then we're in big trouble. + */ + for(i = 0; i < 1000; i++){ + if (gpio_get_value(dp_hpd)) + break; + mdelay(1); + } +} + +/* + * This delay is T3 in the LCD timing spec (defined as >200ms). We set + * this down to 60ms since that's the approximate maximum amount of time + * it'll take a bridge to start outputting LVDS data. The delay of + * >200ms is just a conservative value to avoid turning on the backlight + * when there's random LCD data on the screen. Shaving 140ms off the + * boot is an acceptable trade-off. + */ +#define LCD_T3_DELAY_MS 60 + +#define LCD_T5_DELAY_MS 10 +#define LCD_T6_DELAY_MS 10 + +static void backlight_pwm(void) +{ + /*Configure backlight PWM as a simple output high (100% brightness) */ + gpio_direction_output(bl_pwm, 1); + udelay(LCD_T6_DELAY_MS * 1000); +} + +static void backlight_en(void) +{ + /* Configure GPIO for LCD_BL_EN */ + gpio_direction_output(bl_en, 1); +} + +static enum exynos5_gpio_pin usb_drd0_vbus = GPIO_H00; +static enum exynos5_gpio_pin usb_drd1_vbus = GPIO_H01; +/* static enum exynos5_gpio_pin hsic_reset_l = GPIO_X24; */ + +static void prepare_usb(void) +{ + /* Kick these resets off early so they get at least 100ms to settle */ + reset_usb_drd0_dwc3(); + reset_usb_drd1_dwc3(); +} + +static void setup_usb(void) +{ + /* HSIC and USB HOST port not needed in firmware on this board */ + setup_usb_drd0_phy(); + setup_usb_drd1_phy(); + + setup_usb_drd0_dwc3(); + setup_usb_drd1_dwc3(); + + gpio_direction_output(usb_drd0_vbus, 1); + gpio_direction_output(usb_drd1_vbus, 1); +} + +static struct edp_video_info dp_video_info = { + .master_mode = 0, + .h_sync_polarity = 0, + .v_sync_polarity = 0, + .interlaced = 0, + .color_space = COLOR_RGB, + .dynamic_range = VESA, + .ycbcr_coeff = COLOR_YCBCR601, + .color_depth = COLOR_8, +}; + +/* FIXME: move some place more appropriate */ +#define MAX_DP_TRIES 5 + +static void setup_storage(void) +{ + /* MMC0: Fixed, 8 bit mode, connected with GPIO. */ + if (clock_set_dwmci(PERIPH_ID_SDMMC0)) + printk(BIOS_CRIT, "%s: Failed to set MMC0 clock.\n", __func__); + exynos_pinmux_sdmmc0(); + + /* MMC2: Removable, 4 bit mode, no GPIO. */ + /* (Must be after romstage to avoid breaking SDMMC boot.) */ + clock_set_dwmci(PERIPH_ID_SDMMC2); + exynos_pinmux_sdmmc2(); +} + +static void gpio_init(void) +{ + /* Set up the I2C busses. */ + exynos_pinmux_i2c2(); + exynos_pinmux_i2c4(); + exynos_pinmux_i2c7(); + exynos_pinmux_i2c8(); + exynos_pinmux_i2c9(); + exynos_pinmux_i2c10(); +} + +enum { + FET_CTRL_WAIT = 3 << 2, + FET_CTRL_ADENFET = 1 << 1, + FET_CTRL_ENFET = 1 << 0 +}; + +static void tps65090_thru_ec_fet_set(int index) +{ + uint8_t value = FET_CTRL_ADENFET | FET_CTRL_WAIT | FET_CTRL_ENFET; + + if (google_chromeec_i2c_xfer(0x48, 0xe + index, 1, &value, 1, 0)) { + printk(BIOS_ERR, + "Error sending i2c pass through command to EC.\n"); + return; + } +} + +static void lcd_vdd(void) +{ + /* Enable FET6, lcd panel */ + tps65090_thru_ec_fet_set(6); +} + +static void backlight_vdd(void) +{ + /* Enable FET1, backlight */ + tps65090_thru_ec_fet_set(1); +} + +static void sdmmc_vdd(void) +{ + /* Enable FET4, P3.3V_SDCARD */ + tps65090_thru_ec_fet_set(4); +} + +/* this happens after cpu_init where exynos resources are set */ +static void mainboard_init(device_t dev) +{ + /* we'll stick with the crummy u-boot struct for now.*/ + /* doing this as an auto since the struct has to be writeable */ + struct edp_device_info device_info; + + void *fb_addr = (void *)(get_fb_base_kb() * KiB); + + prepare_usb(); + gpio_init(); + setup_storage(); + tmu_init(&exynos5420_tmu_info); + + /* Clock Gating all the unused IP's to save power */ + clock_gate(); + + sdmmc_vdd(); + + set_vbe_mode_info_valid(&edid, (uintptr_t)fb_addr); + + /* + * The reset value for FIMD SYSMMU register MMU_CTRL:0x14640000 + * should be 0 according to the datasheet, but has experimentally + * been found to come up as 3. This means FIMD SYSMMU is on by + * default on Exynos5420. For now we are disabling FIMD SYSMMU. + */ + writel(0x0, (void *)0x14640000); + writel(0x0, (void *)0x14680000); + + lcd_vdd(); + + /* Start the fimd running before you do the phy and lcd setup. + * why do fimd before training etc? + * because we need a data stream from + * the fimd or the clock recovery step fails. + */ + vidinfo.screen_base = fb_addr; + exynos_fimd_lcd_init(&vidinfo); + + parade_dp_bridge_setup(); + + /* this might get more dynamic in future ... */ + memset(&device_info, 0, sizeof(device_info)); + device_info.disp_info.name = (char *)"Peach Pit display"; + device_info.disp_info.h_total = 1366; + device_info.disp_info.v_total = 768; + device_info.video_info = dp_video_info; + device_info.raw_edid = panel_edid; + exynos_init_dp(&device_info); + + backlight_vdd(); + backlight_pwm(); + backlight_en(); + + setup_usb(); +} + +static void mainboard_enable(device_t dev) +{ + dev->ops->init = &mainboard_init; + + /* set up caching for the DRAM */ + mmu_config_range(DRAM_START, DRAM_SIZE, DCACHE_WRITEBACK); + mmu_config_range(DMA_START >> 20, DMA_SIZE >> 20, DCACHE_OFF); + tlb_invalidate_all(); + + const unsigned epll_hz = 192000000; + const unsigned sample_rate = 48000; + const unsigned lr_frame_size = 256; + clock_epll_set_rate(epll_hz); + clock_select_i2s_clk_source(); + clock_set_i2s_clk_prescaler(epll_hz, sample_rate * lr_frame_size); + + power_enable_xclkout(); +} + +struct chip_operations mainboard_ops = { + .name = "Samsung/Google ARM Chromebook", + .enable_dev = mainboard_enable, +}; + +void lb_board(struct lb_header *header) +{ + struct lb_range *dma; + + dma = (struct lb_range *)lb_new_record(header); + dma->tag = LB_TAB_DMA; + dma->size = sizeof(*dma); + dma->range_start = (intptr_t)DMA_START; + dma->range_size = DMA_SIZE; +} diff --git a/src/mainboard/google/peach_pit/memory.c b/src/mainboard/google/peach_pit/memory.c new file mode 100644 index 0000000000..8a9f454886 --- /dev/null +++ b/src/mainboard/google/peach_pit/memory.c @@ -0,0 +1,116 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Samsung Electronics + * Copyright 2013 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include + +#include +#include +#include +#include + +const struct mem_timings mem_timings = { + .mem_manuf = MEM_MANUF_SAMSUNG, + .mem_type = DDR_MODE_DDR3, + .frequency_mhz = 800, + .direct_cmd_msr = { + 0x00020018, 0x00030000, 0x00010046, 0x00000d70, + 0x00000c70 + }, + .timing_ref = 0x000000bb, + .timing_row = 0x6836650f, + .timing_data = 0x3630580b, + .timing_power = 0x41000a26, + .phy0_dqs = 0x08080808, + .phy1_dqs = 0x08080808, + .phy0_dq = 0x08080808, + .phy1_dq = 0x08080808, + .phy0_tFS = 0x8, + .phy1_tFS = 0x8, + .phy0_pulld_dqs = 0xf, + .phy1_pulld_dqs = 0xf, + + .lpddr3_ctrl_phy_reset = 0x1, + .ctrl_start_point = 0x10, + .ctrl_inc = 0x10, + .ctrl_start = 0x1, + .ctrl_dll_on = 0x1, + .ctrl_ref = 0x8, + + .ctrl_force = 0x1a, + .ctrl_rdlat = 0x0b, + .ctrl_bstlen = 0x08, + + .fp_resync = 0x8, + .iv_size = 0x7, + .dfi_init_start = 1, + .aref_en = 1, + + .rd_fetch = 0x3, + + .zq_mode_dds = 0x7, + .zq_mode_term = 0x1, + .zq_mode_noterm = 1, + + /* + * Dynamic Clock: Always Running + * Memory Burst length: 8 + * Number of chips: 1 + * Memory Bus width: 32 bit + * Memory Type: DDR3 + * Additional Latancy for PLL: 0 Cycle + */ + .memcontrol = DMC_MEMCONTROL_CLK_STOP_DISABLE | + DMC_MEMCONTROL_DPWRDN_DISABLE | + DMC_MEMCONTROL_DPWRDN_ACTIVE_PRECHARGE | + DMC_MEMCONTROL_DSREF_DISABLE | + DMC_MEMCONTROL_ADD_LAT_PALL_CYCLE(0) | + DMC_MEMCONTROL_MEM_TYPE_DDR3 | + DMC_MEMCONTROL_MEM_WIDTH_32BIT | + DMC_MEMCONTROL_NUM_CHIP_1 | + DMC_MEMCONTROL_BL_8 | + DMC_MEMCONTROL_PZQ_DISABLE | + DMC_MEMCONTROL_MRR_BYTE_7_0, + /* + * For channel interleaving, the chip_base needs to be set to + * half the bus address. So for a base address of 0x2000_0000, + * the chip_base value is 0x20 without interleaving and 0x10 + * with channel interleaving. See note in section 17.14. + */ + .membaseconfig0 = (0x10 << 16) | DMC_CHIP_MASK_1GB, + .memconfig = DMC_MEMCONFIG_CHIP_MAP_SPLIT | + DMC_MEMCONFIGx_CHIP_COL_10 | + DMC_MEMCONFIGx_CHIP_ROW_15 | + DMC_MEMCONFIGx_CHIP_BANK_8, + .prechconfig_tp_cnt = 0xff, + .dpwrdn_cyc = 0xff, + .dsref_cyc = 0xffff, + .concontrol = DMC_CONCONTROL_DFI_INIT_START_DISABLE | + DMC_CONCONTROL_TIMEOUT_LEVEL0 | + DMC_CONCONTROL_RD_FETCH_DISABLE | + DMC_CONCONTROL_AREF_EN_DISABLE | + DMC_CONCONTROL_IO_PD_CON_DISABLE, + .dmc_channels = 1, + .chips_per_channel = 1, + .chips_to_configure = 1, + .send_zq_init = 1, + .gate_leveling_enable = 1, +}; diff --git a/src/mainboard/google/peach_pit/romstage.c b/src/mainboard/google/peach_pit/romstage.c new file mode 100644 index 0000000000..16dc997e75 --- /dev/null +++ b/src/mainboard/google/peach_pit/romstage.c @@ -0,0 +1,279 @@ +/* + * This file is part of the coreboot project. + * + * Copyright 2013 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include + +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#define PMIC_I2C_BUS 4 + +struct pmic_write +{ + int or_orig; // Whether to or in the original value. + uint8_t reg; // Register to write. + uint8_t val; // Value to write. +}; + +/* + * Use read-modify-write for MAX77802 control registers and clobber the + * output voltage setting (BUCK?DVS?) registers. + */ +struct pmic_write pmic_writes[] = +{ + { 1, MAX77802_REG_PMIC_32KHZ, MAX77802_32KHCP_EN }, + { 0, MAX77802_REG_PMIC_BUCK1DVS1, MAX77802_BUCK1DVS1_1V }, + { 1, MAX77802_REG_PMIC_BUCK1CTRL, MAX77802_BUCK_TYPE1_ON | + MAX77802_BUCK_TYPE1_IGNORE_PWRREQ }, + { 0, MAX77802_REG_PMIC_BUCK2DVS1, MAX77802_BUCK2DVS1_1_2625V }, + { 1, MAX77802_REG_PMIC_BUCK2CTRL1, MAX77802_BUCK_TYPE2_ON | + MAX77802_BUCK_TYPE2_IGNORE_PWRREQ }, + { 0, MAX77802_REG_PMIC_BUCK3DVS1, MAX77802_BUCK3DVS1_1V }, + { 1, MAX77802_REG_PMIC_BUCK3CTRL1, MAX77802_BUCK_TYPE2_ON | + MAX77802_BUCK_TYPE2_IGNORE_PWRREQ }, + { 0, MAX77802_REG_PMIC_BUCK4DVS1, MAX77802_BUCK4DVS1_1V }, + { 1, MAX77802_REG_PMIC_BUCK4CTRL1, MAX77802_BUCK_TYPE2_ON | + MAX77802_BUCK_TYPE2_IGNORE_PWRREQ }, + { 0, MAX77802_REG_PMIC_BUCK6DVS1, MAX77802_BUCK6DVS1_1V }, + { 1, MAX77802_REG_PMIC_BUCK6CTRL, MAX77802_BUCK_TYPE1_ON | + MAX77802_BUCK_TYPE1_IGNORE_PWRREQ }, + /* Disable Boost(bypass) OUTPUT */ + { 0, MAX77802_REG_PMIC_BOOSTCTRL, MAX77802_BOOSTCTRL_OFF}, +}; + +static int setup_power(int is_resume) +{ + int error = 0; + int i; + + power_init(); + + if (is_resume) { + return 0; + } + + /* Initialize I2C bus to configure PMIC. */ + exynos_pinmux_i2c4(); + i2c_init(PMIC_I2C_BUS, 1000000, 0x00); /* 1MHz */ + + for (i = 0; i < ARRAY_SIZE(pmic_writes); i++) { + uint8_t data = 0; + uint8_t reg = pmic_writes[i].reg; + + if (pmic_writes[i].or_orig) + error |= i2c_read(4, MAX77802_I2C_ADDR, + reg, sizeof(reg), + &data, sizeof(data)); + data |= pmic_writes[i].val; + error |= i2c_write(4, MAX77802_I2C_ADDR, + reg, sizeof(reg), + &data, sizeof(data)); + } + + return error; +} + +static void setup_ec(void) +{ + /* SPI2 (EC) is slower and needs to work in half-duplex mode with + * single byte bus width. */ + clock_set_rate(PERIPH_ID_SPI2, 5000000); + exynos_pinmux_spi2(); +} + +static void setup_gpio(void) +{ + gpio_direction_input(GPIO_X30); // WP_GPIO + gpio_set_pull(GPIO_X30, GPIO_PULL_NONE); + + gpio_direction_input(GPIO_X07); // RECMODE_GPIO + gpio_set_pull(GPIO_X07, GPIO_PULL_NONE); + + gpio_direction_input(GPIO_X34); // LID_GPIO + gpio_set_pull(GPIO_X34, GPIO_PULL_NONE); + + gpio_direction_input(GPIO_X12); // POWER_GPIO + gpio_set_pull(GPIO_X12, GPIO_PULL_NONE); +} + +static void setup_memory(struct mem_timings *mem, int is_resume) +{ + printk(BIOS_SPEW, "manufacturer: 0x%x type: 0x%x, div: 0x%x, mhz: %d\n", + mem->mem_manuf, + mem->mem_type, + mem->mpll_mdiv, + mem->frequency_mhz); + + if (ddr3_mem_ctrl_init(mem, DMC_INTERLEAVE_SIZE, !is_resume)) { + die("Failed to initialize memory controller.\n"); + } +} + +#define PRIMITIVE_MEM_TEST 0 +#if PRIMITIVE_MEM_TEST +static unsigned long primitive_mem_test(void) +{ + unsigned long *l = (void *)0x40000000; + int bad = 0; + unsigned long i; + for(i = 0; i < 256*1048576; i++){ + if (! (i%1048576)) + printk(BIOS_SPEW, "%lu ...", i); + l[i] = 0xffffffff - i; + } + + for(i = 0; i < 256*1048576; i++){ + if (! (i%1048576)) + printk(BIOS_SPEW, "%lu ...", i); + if (l[i] != (0xffffffff - i)){ + printk(BIOS_SPEW, "%p: want %08lx got %08lx\n", l, l[i], 0xffffffff - i); + bad++; + } + } + + printk(BIOS_SPEW, "%d errors\n", bad); + + return bad; +} +#else +#define primitive_mem_test() +#endif + +#define SIMPLE_SPI_TEST 0 +#if SIMPLE_SPI_TEST +/* here is a simple SPI debug test, known to fid trouble */ +static void simple_spi_test(void) +{ + struct cbfs_media default_media, *media; + int i, amt = 4 * MiB, errors = 0; + //u32 *data = (void *)0x40000000; + u32 data[1024]; + u32 in; + + amt = sizeof(data); + media = &default_media; + if (init_default_cbfs_media(media) != 0) { + printk(BIOS_SPEW, "Failed to initialize default media.\n"); + return; + } + + + media->open(media); + if (media->read(media, data, (size_t) 0, amt) < amt){ + printk(BIOS_SPEW, "simple_spi_test fails\n"); + return; + } + + + for(i = 0; i < amt; i += 4){ + if (media->read(media, &in, (size_t) i, 4) < 1){ + printk(BIOS_SPEW, "simple_spi_test fails at %d\n", i); + return; + } + if (data[i/4] != in){ + errors++; + printk(BIOS_SPEW, "BAD at %d(%p):\nRAM %08lx\nSPI %08lx\n", + i, &data[i/4], (unsigned long)data[i/4], (unsigned long)in); + /* reread it to see which is wrong. */ + if (media->read(media, &in, (size_t) i, 4) < 1){ + printk(BIOS_SPEW, "simple_spi_test fails at %d\n", i); + return; + } + printk(BIOS_SPEW, "RTRY at %d(%p):\nRAM %08lx\nSPI %08lx\n", + i, &data[i/4], (unsigned long)data[i/4], (unsigned long)in); + } + + } + printk(BIOS_SPEW, "%d errors\n", errors); +} +#else +#define simple_spi_test() +#endif + +void main(void) +{ + + extern struct mem_timings mem_timings; + void *entry; + int is_resume = (get_wakeup_state() != IS_NOT_WAKEUP); + int power_init_failed; + + exynos5420_config_smp(); + power_init_failed = setup_power(is_resume); + + /* Clock must be initialized before console_init, otherwise you may need + * to re-initialize serial console drivers again. */ + system_clock_init(); + + exynos_pinmux_uart3(); + console_init(); + exception_init(); + + if (power_init_failed) + die("Failed to intialize power.\n"); + + /* re-initialize PMIC I2C channel after (re-)setting system clocks */ + i2c_init(PMIC_I2C_BUS, 1000000, 0x00); /* 1MHz */ + + setup_memory(&mem_timings, is_resume); + + primitive_mem_test(); + + trustzone_init(); + + if (is_resume) { + wakeup(); + } + + setup_gpio(); + setup_ec(); + + simple_spi_test(); + /* Set SPI (primary CBFS media) clock to 50MHz. */ + /* if this is uncommented SPI will not work correctly. */ + clock_set_rate(PERIPH_ID_SPI1, 50000000); + exynos_pinmux_spi1(); + simple_spi_test(); + + cbmem_initialize_empty(); + + entry = cbfs_load_stage(CBFS_DEFAULT_MEDIA, "fallback/ramstage"); + simple_spi_test(); + stage_exit(entry); +} diff --git a/src/mainboard/google/peach_pit/wakeup.c b/src/mainboard/google/peach_pit/wakeup.c new file mode 100644 index 0000000000..130282cb64 --- /dev/null +++ b/src/mainboard/google/peach_pit/wakeup.c @@ -0,0 +1,28 @@ +/* + * This file is part of the coreboot project. + * + * Copyright 2013 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include + +int wakeup_need_reset(void) +{ + /* The "wake up" event is not reliable (known as "bad wakeup") and needs + * reset if the TPM reset mask GPIO value is high. */ + return gpio_get_value(GPIO_X06); +} diff --git a/src/mainboard/google/pit/Kconfig b/src/mainboard/google/pit/Kconfig deleted file mode 100644 index 5196c2ce12..0000000000 --- a/src/mainboard/google/pit/Kconfig +++ /dev/null @@ -1,53 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright 2013 Google Inc. -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -if BOARD_GOOGLE_PIT - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_SAMSUNG_EXYNOS5420 - select EC_GOOGLE_CHROMEEC - select EC_GOOGLE_CHROMEEC_SPI - select BOARD_ROMSIZE_KB_4096 - select MAINBOARD_HAS_CHROMEOS - select MAINBOARD_HAS_NATIVE_VGA_INIT - select MAINBOARD_DO_NATIVE_VGA_INIT - select DRIVER_PARADE_PS8625 - -config MAINBOARD_DIR - string - default google/pit - -config MAINBOARD_PART_NUMBER - string - default "Pit" - -config DRAM_SIZE_MB - int - default 2048 - -config EC_GOOGLE_CHROMEEC_SPI_BUS - hex - default 2 - -config UART_FOR_CONSOLE - int - default 3 - -endif # BOARD_GOOGLE_PIT diff --git a/src/mainboard/google/pit/Makefile.inc b/src/mainboard/google/pit/Makefile.inc deleted file mode 100644 index df9b797367..0000000000 --- a/src/mainboard/google/pit/Makefile.inc +++ /dev/null @@ -1,28 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright 2012 Google Inc. -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -bootblock-y += wakeup.c - -romstage-y += memory.c -romstage-y += romstage.c -romstage-y += wakeup.c -romstage-y += chromeos.c - -ramstage-y += mainboard.c -ramstage-y += chromeos.c diff --git a/src/mainboard/google/pit/chromeos.c b/src/mainboard/google/pit/chromeos.c deleted file mode 100644 index 7b0807c71a..0000000000 --- a/src/mainboard/google/pit/chromeos.c +++ /dev/null @@ -1,101 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright 2013 Google Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -void fill_lb_gpios(struct lb_gpios *gpios) -{ - int count = 0; - - /* Write Protect: active low */ - gpios->gpios[count].port = EXYNOS5_GPX3; - gpios->gpios[count].polarity = ACTIVE_LOW; - gpios->gpios[count].value = gpio_get_value(GPIO_X30); // WP_GPIO - strncpy((char *)gpios->gpios[count].name, "write protect", - GPIO_MAX_NAME_LENGTH); - count++; - - /* Recovery: active low */ - gpios->gpios[count].port = -1; - gpios->gpios[count].polarity = ACTIVE_HIGH; - gpios->gpios[count].value = get_recovery_mode_switch(); - strncpy((char *)gpios->gpios[count].name, "recovery", - GPIO_MAX_NAME_LENGTH); - count++; - - /* Lid: active high */ - gpios->gpios[count].port = EXYNOS5_GPX3; - gpios->gpios[count].polarity = ACTIVE_HIGH; - gpios->gpios[count].value = gpio_get_value(GPIO_X34); // LID_GPIO - strncpy((char *)gpios->gpios[count].name, "lid", GPIO_MAX_NAME_LENGTH); - count++; - - /* Power: virtual GPIO active low */ - gpios->gpios[count].port = EXYNOS5_GPX1; - gpios->gpios[count].polarity = ACTIVE_LOW; - gpios->gpios[count].value = - gpio_get_value(GPIO_X12); // POWER_GPIO - strncpy((char *)gpios->gpios[count].name, "power", - GPIO_MAX_NAME_LENGTH); - count++; - - /* Developer: virtual GPIO active high */ - gpios->gpios[count].port = -1; - gpios->gpios[count].polarity = ACTIVE_HIGH; - gpios->gpios[count].value = get_developer_mode_switch(); - strncpy((char *)gpios->gpios[count].name, "developer", - GPIO_MAX_NAME_LENGTH); - count++; - - gpios->size = sizeof(*gpios) + (count * sizeof(struct lb_gpio)); - gpios->count = count; - - printk(BIOS_ERR, "Added %d GPIOS size %d\n", count, gpios->size); -} - -int get_developer_mode_switch(void) -{ - return 0; -} - -int get_recovery_mode_switch(void) -{ - uint32_t ec_events; - - /* The GPIO is active low. */ - if (!gpio_get_value(GPIO_X07)) // RECMODE_GPIO - return 1; - - ec_events = google_chromeec_get_events_b(); - return !!(ec_events & - EC_HOST_EVENT_MASK(EC_HOST_EVENT_KEYBOARD_RECOVERY)); -} - -int get_write_protect_state(void) -{ - return !gpio_get_value(GPIO_X30); -} diff --git a/src/mainboard/google/pit/devicetree.cb b/src/mainboard/google/pit/devicetree.cb deleted file mode 100644 index 568daf86ef..0000000000 --- a/src/mainboard/google/pit/devicetree.cb +++ /dev/null @@ -1,33 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright 2012 Google Inc. -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -chip soc/samsung/exynos5420 - device cpu_cluster 0 on end - register "xres" = "1366" - register "yres" = "768" - register "framebuffer_bits_per_pixel" = "16" - # complex magic timing! - register "clkval_f" = "2" - register "upper_margin" = "14" - register "lower_margin" = "3" - register "vsync" = "5" - register "left_margin" = "80" - register "right_margin" = "48" - register "hsync" = "32" -end diff --git a/src/mainboard/google/pit/mainboard.c b/src/mainboard/google/pit/mainboard.c deleted file mode 100644 index c07db7b85f..0000000000 --- a/src/mainboard/google/pit/mainboard.c +++ /dev/null @@ -1,498 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright 2013 Google Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/* convenient shorthand (in MB) */ -#define DRAM_START (CONFIG_SYS_SDRAM_BASE >> 20) -#define DRAM_SIZE CONFIG_DRAM_SIZE_MB - -/* Arbitrary range of DMA memory for depthcharge's drivers */ -#define DMA_START (0x77300000) -#define DMA_SIZE (0x00100000) - -static struct edid edid = { - .ha = 1366, - .va = 768, - .framebuffer_bits_per_pixel = 16, - .x_resolution = 1366, - .y_resolution = 768, - .bytes_per_line = 2 * 1366 -}; - -/* from the fdt */ -static struct vidinfo vidinfo = { - .vl_freq = 60, - .vl_col = 1366, - .vl_row = 768, - .vl_width = 1366, - .vl_height = 768, - .vl_clkp = 1, - .vl_dp = 1, - .vl_bpix = 4, - .vl_hspw = 32, - .vl_hbpd = 40, - .vl_hfpd = 40, - .vl_vspw = 6, - .vl_vbpd = 10, - .vl_vfpd = 12, - .vl_cmd_allow_len = 0xf, - .win_id = 3, - .dp_enabled = 1, - .dual_lcd_enabled = 0, - .interface_mode = FIMD_RGB_INTERFACE, -}; - -static unsigned char panel_edid[] = { - 0x00,0xff,0xff,0xff,0xff,0xff,0xff,0x00, - 0x06,0xaf,0x5c,0x31,0x00,0x00,0x00,0x00, - 0x00,0x16,0x01,0x03,0x80,0x1a,0x0e,0x78, - 0x0a,0x99,0x85,0x95,0x55,0x56,0x92,0x28, - 0x22,0x50,0x54,0x00,0x00,0x00,0x01,0x01, - 0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01, - 0x01,0x01,0x01,0x01,0x01,0x01,0xa3,0x1b, - 0x56,0x7e,0x50,0x00,0x16,0x30,0x30,0x20, - 0x36,0x00,0x00,0x90,0x10,0x00,0x00,0x18, - 0x6d,0x12,0x56,0x7e,0x50,0x00,0x16,0x30, - 0x30,0x20,0x36,0x00,0x00,0x90,0x10,0x00, - 0x00,0x18,0x00,0x00,0x00,0xfe,0x00,0x41, - 0x55,0x4f,0x0a,0x20,0x20,0x20,0x20,0x20, - 0x20,0x20,0x20,0x20,0x00,0x00,0x00,0xfe, - 0x00,0x42,0x31,0x31,0x36,0x58,0x57,0x30, - 0x33,0x20,0x56,0x31,0x20,0x0a,0x00,0x3d, - 0x00,0xc0,0x00,0x00,0x27,0xfd,0x00,0x20, - 0x02,0x59,0x07,0x00,0x64,0x3e,0x07,0x02, - 0x00,0x00,0xcd,0x12,0x59,0xff,0x10,0x03, - 0x00,0x00,0x00,0x00,0x64,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x18,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x05,0x00,0x00,0x00, - 0x9c,0x3f,0x07,0x02,0x31,0xf9,0x00,0x20, - 0x59,0xff,0x10,0x03,0x00,0x00,0x00,0x00, - 0xbc,0x3e,0x07,0x02,0xc0,0x9b,0x01,0x20, - 0x00,0x00,0x00,0x00,0xdb,0xf8,0x00,0x20, - 0x98,0x3e,0x07,0x02,0x8b,0xaf,0x00,0x20, - 0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0xe5,0xcd,0x16,0x00,0xe9,0xcd,0x16,0x00, - 0xe8,0x03,0x00,0x00,0x6c,0x55,0x01,0x20, - 0x2c,0x01,0x00,0x00,0x85,0xbb,0x00,0x20, - 0xe8,0x03,0x00,0x00,0xe9,0xcd,0x16,0x00, -}; - -static const struct parade_write parade_writes[] = { - { 0x02, 0xa1, 0x01 }, /* HPD low */ - /* - * SW setting - * [1:0] SW output 1.2V voltage is lower to 96% - */ - { 0x04, 0x14, 0x01 }, - /* - * RCO SS setting - * [5:4] = b01 0.5%, b10 1%, b11 1.5% - */ - { 0x04, 0xe3, 0x20 }, - { 0x04, 0xe2, 0x80 }, /* [7] RCO SS enable */ - /* - * RPHY Setting - * [3:2] CDR tune wait cycle before - * measure for fine tune b00: 1us, - * 01: 0.5us, 10:2us, 11:4us. - */ - { 0x04, 0x8a, 0x0c }, - { 0x04, 0x89, 0x08 }, /* [3] RFD always on */ - /* - * CTN lock in/out: - * 20000ppm/80000ppm. Lock out 2 - * times. - */ - { 0x04, 0x71, 0x2d }, - /* - * 2.7G CDR settings - * NOF=40LSB for HBR CDR setting - */ - { 0x04, 0x7d, 0x07 }, - { 0x04, 0x7b, 0x00 }, /* [1:0] Fmin=+4bands */ - { 0x04, 0x7a, 0xfd }, /* [7:5] DCO_FTRNG=+-40% */ - /* - * 1.62G CDR settings - * [5:2]NOF=64LSB [1:0]DCO scale is 2/5 - */ - { 0x04, 0xc0, 0x12 }, - { 0x04, 0xc1, 0x92 }, /* Gitune=-37% */ - { 0x04, 0xc2, 0x1c }, /* Fbstep=100% */ - { 0x04, 0x32, 0x80 }, /* [7] LOS signal disable */ - /* - * RPIO Setting - * [7:4] LVDS driver bias current : - * 75% (250mV swing) - */ - { 0x04, 0x00, 0xb0 }, - /* - * [7:6] Right-bar GPIO output strength is 8mA - */ - { 0x04, 0x15, 0x40 }, - /* EQ Training State Machine Setting */ - { 0x04, 0x54, 0x10 }, /* RCO calibration start */ - /* [4:0] MAX_LANE_COUNT set to one lane */ - { 0x01, 0x02, 0x81 }, - /* [4:0] LANE_COUNT_SET set to one lane */ - { 0x01, 0x21, 0x81 }, - { 0x00, 0x52, 0x20 }, - { 0x00, 0xf1, 0x03 }, /* HPD CP toggle enable */ - { 0x00, 0x62, 0x41 }, - /* Counter number, add 1ms counter delay */ - { 0x00, 0xf6, 0x01 }, - /* - * [6]PWM function control by - * DPCD0040f[7], default is PWM - * block always works. - */ - { 0x00, 0x77, 0x06 }, - /* - * 04h Adjust VTotal tolerance to - * fix the 30Hz no display issue - */ - { 0x00, 0x4c, 0x04 }, - /* DPCD00400='h00, Parade OUI = 'h001cf8 */ - { 0x01, 0xc0, 0x00 }, - { 0x01, 0xc1, 0x1c }, /* DPCD00401='h1c */ - { 0x01, 0xc2, 0xf8 }, /* DPCD00402='hf8 */ - /* - * DPCD403~408 = ASCII code - * D2SLV5='h4432534c5635 - */ - { 0x01, 0xc3, 0x44 }, - { 0x01, 0xc4, 0x32 }, /* DPCD404 */ - { 0x01, 0xc5, 0x53 }, /* DPCD405 */ - { 0x01, 0xc6, 0x4c }, /* DPCD406 */ - { 0x01, 0xc7, 0x56 }, /* DPCD407 */ - { 0x01, 0xc8, 0x35 }, /* DPCD408 */ - /* - * DPCD40A, Initial Code major revision - * '01' - */ - { 0x01, 0xca, 0x01 }, - /* DPCD40B, Initial Code minor revision '05' */ - { 0x01, 0xcb, 0x05 }, - /* DPCD720, Select external PWM */ - { 0x01, 0xa5, 0x80 }, - /* - * Set LVDS output as 6bit-VESA mapping, - * single LVDS channel - */ - { 0x01, 0xcc, 0x13 }, - /* Enable SSC set by register */ - { 0x02, 0xb1, 0x20 }, - /* - * Set SSC enabled and +/-1% central - * spreading - */ - { 0x04, 0x10, 0x16 }, - /* MPU Clock source: LC => RCO */ - { 0x04, 0x59, 0x60 }, - { 0x04, 0x54, 0x14 }, /* LC -> RCO */ - { 0x02, 0xa1, 0x91 } /* HPD high */ -}; - -/* TODO: transplanted DP stuff, clean up once we have something that works */ -static enum exynos5_gpio_pin dp_pd_l = GPIO_X35; /* active low */ -static enum exynos5_gpio_pin dp_rst_l = GPIO_Y77; /* active low */ -static enum exynos5_gpio_pin dp_hpd = GPIO_X26; /* active high */ -static enum exynos5_gpio_pin bl_pwm = GPIO_B20; /* active high */ -static enum exynos5_gpio_pin bl_en = GPIO_X22; /* active high */ - -static void parade_dp_bridge_setup(void) -{ - int i; - - gpio_set_value(dp_pd_l, 1); - gpio_cfg_pin(dp_pd_l, GPIO_OUTPUT); - gpio_set_pull(dp_pd_l, GPIO_PULL_NONE); - - gpio_set_value(dp_rst_l, 0); - gpio_cfg_pin(dp_rst_l, GPIO_OUTPUT); - gpio_set_pull(dp_rst_l, GPIO_PULL_NONE); - udelay(10); - gpio_set_value(dp_rst_l, 1); - - - gpio_set_pull(dp_hpd, GPIO_PULL_NONE); - gpio_cfg_pin(dp_hpd, GPIO_INPUT); - - /* De-assert PD (and possibly RST) to power up the bridge. */ - gpio_set_value(dp_pd_l, 1); - gpio_set_value(dp_rst_l, 1); - - /* Hang around for the bridge to come up. */ - mdelay(40); - - /* Configure the bridge chip. */ - exynos_pinmux_i2c7(); - i2c_init(7, 100000, 0x00); - - parade_ps8625_bridge_setup(7, 0x48, parade_writes, - ARRAY_SIZE(parade_writes)); - /* Spin until the display is ready. - * It's quite important to try really hard to get the display up, - * so be generous. It will typically be ready in only 5 ms. and - * we're out of here. - * If it's not ready after a second, then we're in big trouble. - */ - for(i = 0; i < 1000; i++){ - if (gpio_get_value(dp_hpd)) - break; - mdelay(1); - } -} - -/* - * This delay is T3 in the LCD timing spec (defined as >200ms). We set - * this down to 60ms since that's the approximate maximum amount of time - * it'll take a bridge to start outputting LVDS data. The delay of - * >200ms is just a conservative value to avoid turning on the backlight - * when there's random LCD data on the screen. Shaving 140ms off the - * boot is an acceptable trade-off. - */ -#define LCD_T3_DELAY_MS 60 - -#define LCD_T5_DELAY_MS 10 -#define LCD_T6_DELAY_MS 10 - -static void backlight_pwm(void) -{ - /*Configure backlight PWM as a simple output high (100% brightness) */ - gpio_direction_output(bl_pwm, 1); - udelay(LCD_T6_DELAY_MS * 1000); -} - -static void backlight_en(void) -{ - /* Configure GPIO for LCD_BL_EN */ - gpio_direction_output(bl_en, 1); -} - -static enum exynos5_gpio_pin usb_drd0_vbus = GPIO_H00; -static enum exynos5_gpio_pin usb_drd1_vbus = GPIO_H01; -/* static enum exynos5_gpio_pin hsic_reset_l = GPIO_X24; */ - -static void prepare_usb(void) -{ - /* Kick these resets off early so they get at least 100ms to settle */ - reset_usb_drd0_dwc3(); - reset_usb_drd1_dwc3(); -} - -static void setup_usb(void) -{ - /* HSIC and USB HOST port not needed in firmware on this board */ - setup_usb_drd0_phy(); - setup_usb_drd1_phy(); - - setup_usb_drd0_dwc3(); - setup_usb_drd1_dwc3(); - - gpio_direction_output(usb_drd0_vbus, 1); - gpio_direction_output(usb_drd1_vbus, 1); -} - -static struct edp_video_info dp_video_info = { - .master_mode = 0, - .h_sync_polarity = 0, - .v_sync_polarity = 0, - .interlaced = 0, - .color_space = COLOR_RGB, - .dynamic_range = VESA, - .ycbcr_coeff = COLOR_YCBCR601, - .color_depth = COLOR_8, -}; - -/* FIXME: move some place more appropriate */ -#define MAX_DP_TRIES 5 - -static void setup_storage(void) -{ - /* MMC0: Fixed, 8 bit mode, connected with GPIO. */ - if (clock_set_dwmci(PERIPH_ID_SDMMC0)) - printk(BIOS_CRIT, "%s: Failed to set MMC0 clock.\n", __func__); - exynos_pinmux_sdmmc0(); - - /* MMC2: Removable, 4 bit mode, no GPIO. */ - /* (Must be after romstage to avoid breaking SDMMC boot.) */ - clock_set_dwmci(PERIPH_ID_SDMMC2); - exynos_pinmux_sdmmc2(); -} - -static void gpio_init(void) -{ - /* Set up the I2C busses. */ - exynos_pinmux_i2c2(); - exynos_pinmux_i2c4(); - exynos_pinmux_i2c7(); - exynos_pinmux_i2c8(); - exynos_pinmux_i2c9(); - exynos_pinmux_i2c10(); -} - -enum { - FET_CTRL_WAIT = 3 << 2, - FET_CTRL_ADENFET = 1 << 1, - FET_CTRL_ENFET = 1 << 0 -}; - -static void tps65090_thru_ec_fet_set(int index) -{ - uint8_t value = FET_CTRL_ADENFET | FET_CTRL_WAIT | FET_CTRL_ENFET; - - if (google_chromeec_i2c_xfer(0x48, 0xe + index, 1, &value, 1, 0)) { - printk(BIOS_ERR, - "Error sending i2c pass through command to EC.\n"); - return; - } -} - -static void lcd_vdd(void) -{ - /* Enable FET6, lcd panel */ - tps65090_thru_ec_fet_set(6); -} - -static void backlight_vdd(void) -{ - /* Enable FET1, backlight */ - tps65090_thru_ec_fet_set(1); -} - -static void sdmmc_vdd(void) -{ - /* Enable FET4, P3.3V_SDCARD */ - tps65090_thru_ec_fet_set(4); -} - -/* this happens after cpu_init where exynos resources are set */ -static void mainboard_init(device_t dev) -{ - /* we'll stick with the crummy u-boot struct for now.*/ - /* doing this as an auto since the struct has to be writeable */ - struct edp_device_info device_info; - - void *fb_addr = (void *)(get_fb_base_kb() * KiB); - - prepare_usb(); - gpio_init(); - setup_storage(); - tmu_init(&exynos5420_tmu_info); - - /* Clock Gating all the unused IP's to save power */ - clock_gate(); - - sdmmc_vdd(); - - set_vbe_mode_info_valid(&edid, (uintptr_t)fb_addr); - - /* - * The reset value for FIMD SYSMMU register MMU_CTRL:0x14640000 - * should be 0 according to the datasheet, but has experimentally - * been found to come up as 3. This means FIMD SYSMMU is on by - * default on Exynos5420. For now we are disabling FIMD SYSMMU. - */ - writel(0x0, (void *)0x14640000); - writel(0x0, (void *)0x14680000); - - lcd_vdd(); - - /* Start the fimd running before you do the phy and lcd setup. - * why do fimd before training etc? - * because we need a data stream from - * the fimd or the clock recovery step fails. - */ - vidinfo.screen_base = fb_addr; - exynos_fimd_lcd_init(&vidinfo); - - parade_dp_bridge_setup(); - - /* this might get more dynamic in future ... */ - memset(&device_info, 0, sizeof(device_info)); - device_info.disp_info.name = (char *)"Pit display"; - device_info.disp_info.h_total = 1366; - device_info.disp_info.v_total = 768; - device_info.video_info = dp_video_info; - device_info.raw_edid = panel_edid; - exynos_init_dp(&device_info); - - backlight_vdd(); - backlight_pwm(); - backlight_en(); - - setup_usb(); -} - -static void mainboard_enable(device_t dev) -{ - dev->ops->init = &mainboard_init; - - /* set up caching for the DRAM */ - mmu_config_range(DRAM_START, DRAM_SIZE, DCACHE_WRITEBACK); - mmu_config_range(DMA_START >> 20, DMA_SIZE >> 20, DCACHE_OFF); - tlb_invalidate_all(); - - const unsigned epll_hz = 192000000; - const unsigned sample_rate = 48000; - const unsigned lr_frame_size = 256; - clock_epll_set_rate(epll_hz); - clock_select_i2s_clk_source(); - clock_set_i2s_clk_prescaler(epll_hz, sample_rate * lr_frame_size); - - power_enable_xclkout(); -} - -struct chip_operations mainboard_ops = { - .name = "Samsung/Google ARM Chromebook", - .enable_dev = mainboard_enable, -}; - -void lb_board(struct lb_header *header) -{ - struct lb_range *dma; - - dma = (struct lb_range *)lb_new_record(header); - dma->tag = LB_TAB_DMA; - dma->size = sizeof(*dma); - dma->range_start = (intptr_t)DMA_START; - dma->range_size = DMA_SIZE; -} diff --git a/src/mainboard/google/pit/memory.c b/src/mainboard/google/pit/memory.c deleted file mode 100644 index 8a9f454886..0000000000 --- a/src/mainboard/google/pit/memory.c +++ /dev/null @@ -1,116 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Samsung Electronics - * Copyright 2013 Google Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include -#include -#include - -#include -#include -#include -#include - -const struct mem_timings mem_timings = { - .mem_manuf = MEM_MANUF_SAMSUNG, - .mem_type = DDR_MODE_DDR3, - .frequency_mhz = 800, - .direct_cmd_msr = { - 0x00020018, 0x00030000, 0x00010046, 0x00000d70, - 0x00000c70 - }, - .timing_ref = 0x000000bb, - .timing_row = 0x6836650f, - .timing_data = 0x3630580b, - .timing_power = 0x41000a26, - .phy0_dqs = 0x08080808, - .phy1_dqs = 0x08080808, - .phy0_dq = 0x08080808, - .phy1_dq = 0x08080808, - .phy0_tFS = 0x8, - .phy1_tFS = 0x8, - .phy0_pulld_dqs = 0xf, - .phy1_pulld_dqs = 0xf, - - .lpddr3_ctrl_phy_reset = 0x1, - .ctrl_start_point = 0x10, - .ctrl_inc = 0x10, - .ctrl_start = 0x1, - .ctrl_dll_on = 0x1, - .ctrl_ref = 0x8, - - .ctrl_force = 0x1a, - .ctrl_rdlat = 0x0b, - .ctrl_bstlen = 0x08, - - .fp_resync = 0x8, - .iv_size = 0x7, - .dfi_init_start = 1, - .aref_en = 1, - - .rd_fetch = 0x3, - - .zq_mode_dds = 0x7, - .zq_mode_term = 0x1, - .zq_mode_noterm = 1, - - /* - * Dynamic Clock: Always Running - * Memory Burst length: 8 - * Number of chips: 1 - * Memory Bus width: 32 bit - * Memory Type: DDR3 - * Additional Latancy for PLL: 0 Cycle - */ - .memcontrol = DMC_MEMCONTROL_CLK_STOP_DISABLE | - DMC_MEMCONTROL_DPWRDN_DISABLE | - DMC_MEMCONTROL_DPWRDN_ACTIVE_PRECHARGE | - DMC_MEMCONTROL_DSREF_DISABLE | - DMC_MEMCONTROL_ADD_LAT_PALL_CYCLE(0) | - DMC_MEMCONTROL_MEM_TYPE_DDR3 | - DMC_MEMCONTROL_MEM_WIDTH_32BIT | - DMC_MEMCONTROL_NUM_CHIP_1 | - DMC_MEMCONTROL_BL_8 | - DMC_MEMCONTROL_PZQ_DISABLE | - DMC_MEMCONTROL_MRR_BYTE_7_0, - /* - * For channel interleaving, the chip_base needs to be set to - * half the bus address. So for a base address of 0x2000_0000, - * the chip_base value is 0x20 without interleaving and 0x10 - * with channel interleaving. See note in section 17.14. - */ - .membaseconfig0 = (0x10 << 16) | DMC_CHIP_MASK_1GB, - .memconfig = DMC_MEMCONFIG_CHIP_MAP_SPLIT | - DMC_MEMCONFIGx_CHIP_COL_10 | - DMC_MEMCONFIGx_CHIP_ROW_15 | - DMC_MEMCONFIGx_CHIP_BANK_8, - .prechconfig_tp_cnt = 0xff, - .dpwrdn_cyc = 0xff, - .dsref_cyc = 0xffff, - .concontrol = DMC_CONCONTROL_DFI_INIT_START_DISABLE | - DMC_CONCONTROL_TIMEOUT_LEVEL0 | - DMC_CONCONTROL_RD_FETCH_DISABLE | - DMC_CONCONTROL_AREF_EN_DISABLE | - DMC_CONCONTROL_IO_PD_CON_DISABLE, - .dmc_channels = 1, - .chips_per_channel = 1, - .chips_to_configure = 1, - .send_zq_init = 1, - .gate_leveling_enable = 1, -}; diff --git a/src/mainboard/google/pit/romstage.c b/src/mainboard/google/pit/romstage.c deleted file mode 100644 index 16dc997e75..0000000000 --- a/src/mainboard/google/pit/romstage.c +++ /dev/null @@ -1,279 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright 2013 Google Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include -#include - -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#define PMIC_I2C_BUS 4 - -struct pmic_write -{ - int or_orig; // Whether to or in the original value. - uint8_t reg; // Register to write. - uint8_t val; // Value to write. -}; - -/* - * Use read-modify-write for MAX77802 control registers and clobber the - * output voltage setting (BUCK?DVS?) registers. - */ -struct pmic_write pmic_writes[] = -{ - { 1, MAX77802_REG_PMIC_32KHZ, MAX77802_32KHCP_EN }, - { 0, MAX77802_REG_PMIC_BUCK1DVS1, MAX77802_BUCK1DVS1_1V }, - { 1, MAX77802_REG_PMIC_BUCK1CTRL, MAX77802_BUCK_TYPE1_ON | - MAX77802_BUCK_TYPE1_IGNORE_PWRREQ }, - { 0, MAX77802_REG_PMIC_BUCK2DVS1, MAX77802_BUCK2DVS1_1_2625V }, - { 1, MAX77802_REG_PMIC_BUCK2CTRL1, MAX77802_BUCK_TYPE2_ON | - MAX77802_BUCK_TYPE2_IGNORE_PWRREQ }, - { 0, MAX77802_REG_PMIC_BUCK3DVS1, MAX77802_BUCK3DVS1_1V }, - { 1, MAX77802_REG_PMIC_BUCK3CTRL1, MAX77802_BUCK_TYPE2_ON | - MAX77802_BUCK_TYPE2_IGNORE_PWRREQ }, - { 0, MAX77802_REG_PMIC_BUCK4DVS1, MAX77802_BUCK4DVS1_1V }, - { 1, MAX77802_REG_PMIC_BUCK4CTRL1, MAX77802_BUCK_TYPE2_ON | - MAX77802_BUCK_TYPE2_IGNORE_PWRREQ }, - { 0, MAX77802_REG_PMIC_BUCK6DVS1, MAX77802_BUCK6DVS1_1V }, - { 1, MAX77802_REG_PMIC_BUCK6CTRL, MAX77802_BUCK_TYPE1_ON | - MAX77802_BUCK_TYPE1_IGNORE_PWRREQ }, - /* Disable Boost(bypass) OUTPUT */ - { 0, MAX77802_REG_PMIC_BOOSTCTRL, MAX77802_BOOSTCTRL_OFF}, -}; - -static int setup_power(int is_resume) -{ - int error = 0; - int i; - - power_init(); - - if (is_resume) { - return 0; - } - - /* Initialize I2C bus to configure PMIC. */ - exynos_pinmux_i2c4(); - i2c_init(PMIC_I2C_BUS, 1000000, 0x00); /* 1MHz */ - - for (i = 0; i < ARRAY_SIZE(pmic_writes); i++) { - uint8_t data = 0; - uint8_t reg = pmic_writes[i].reg; - - if (pmic_writes[i].or_orig) - error |= i2c_read(4, MAX77802_I2C_ADDR, - reg, sizeof(reg), - &data, sizeof(data)); - data |= pmic_writes[i].val; - error |= i2c_write(4, MAX77802_I2C_ADDR, - reg, sizeof(reg), - &data, sizeof(data)); - } - - return error; -} - -static void setup_ec(void) -{ - /* SPI2 (EC) is slower and needs to work in half-duplex mode with - * single byte bus width. */ - clock_set_rate(PERIPH_ID_SPI2, 5000000); - exynos_pinmux_spi2(); -} - -static void setup_gpio(void) -{ - gpio_direction_input(GPIO_X30); // WP_GPIO - gpio_set_pull(GPIO_X30, GPIO_PULL_NONE); - - gpio_direction_input(GPIO_X07); // RECMODE_GPIO - gpio_set_pull(GPIO_X07, GPIO_PULL_NONE); - - gpio_direction_input(GPIO_X34); // LID_GPIO - gpio_set_pull(GPIO_X34, GPIO_PULL_NONE); - - gpio_direction_input(GPIO_X12); // POWER_GPIO - gpio_set_pull(GPIO_X12, GPIO_PULL_NONE); -} - -static void setup_memory(struct mem_timings *mem, int is_resume) -{ - printk(BIOS_SPEW, "manufacturer: 0x%x type: 0x%x, div: 0x%x, mhz: %d\n", - mem->mem_manuf, - mem->mem_type, - mem->mpll_mdiv, - mem->frequency_mhz); - - if (ddr3_mem_ctrl_init(mem, DMC_INTERLEAVE_SIZE, !is_resume)) { - die("Failed to initialize memory controller.\n"); - } -} - -#define PRIMITIVE_MEM_TEST 0 -#if PRIMITIVE_MEM_TEST -static unsigned long primitive_mem_test(void) -{ - unsigned long *l = (void *)0x40000000; - int bad = 0; - unsigned long i; - for(i = 0; i < 256*1048576; i++){ - if (! (i%1048576)) - printk(BIOS_SPEW, "%lu ...", i); - l[i] = 0xffffffff - i; - } - - for(i = 0; i < 256*1048576; i++){ - if (! (i%1048576)) - printk(BIOS_SPEW, "%lu ...", i); - if (l[i] != (0xffffffff - i)){ - printk(BIOS_SPEW, "%p: want %08lx got %08lx\n", l, l[i], 0xffffffff - i); - bad++; - } - } - - printk(BIOS_SPEW, "%d errors\n", bad); - - return bad; -} -#else -#define primitive_mem_test() -#endif - -#define SIMPLE_SPI_TEST 0 -#if SIMPLE_SPI_TEST -/* here is a simple SPI debug test, known to fid trouble */ -static void simple_spi_test(void) -{ - struct cbfs_media default_media, *media; - int i, amt = 4 * MiB, errors = 0; - //u32 *data = (void *)0x40000000; - u32 data[1024]; - u32 in; - - amt = sizeof(data); - media = &default_media; - if (init_default_cbfs_media(media) != 0) { - printk(BIOS_SPEW, "Failed to initialize default media.\n"); - return; - } - - - media->open(media); - if (media->read(media, data, (size_t) 0, amt) < amt){ - printk(BIOS_SPEW, "simple_spi_test fails\n"); - return; - } - - - for(i = 0; i < amt; i += 4){ - if (media->read(media, &in, (size_t) i, 4) < 1){ - printk(BIOS_SPEW, "simple_spi_test fails at %d\n", i); - return; - } - if (data[i/4] != in){ - errors++; - printk(BIOS_SPEW, "BAD at %d(%p):\nRAM %08lx\nSPI %08lx\n", - i, &data[i/4], (unsigned long)data[i/4], (unsigned long)in); - /* reread it to see which is wrong. */ - if (media->read(media, &in, (size_t) i, 4) < 1){ - printk(BIOS_SPEW, "simple_spi_test fails at %d\n", i); - return; - } - printk(BIOS_SPEW, "RTRY at %d(%p):\nRAM %08lx\nSPI %08lx\n", - i, &data[i/4], (unsigned long)data[i/4], (unsigned long)in); - } - - } - printk(BIOS_SPEW, "%d errors\n", errors); -} -#else -#define simple_spi_test() -#endif - -void main(void) -{ - - extern struct mem_timings mem_timings; - void *entry; - int is_resume = (get_wakeup_state() != IS_NOT_WAKEUP); - int power_init_failed; - - exynos5420_config_smp(); - power_init_failed = setup_power(is_resume); - - /* Clock must be initialized before console_init, otherwise you may need - * to re-initialize serial console drivers again. */ - system_clock_init(); - - exynos_pinmux_uart3(); - console_init(); - exception_init(); - - if (power_init_failed) - die("Failed to intialize power.\n"); - - /* re-initialize PMIC I2C channel after (re-)setting system clocks */ - i2c_init(PMIC_I2C_BUS, 1000000, 0x00); /* 1MHz */ - - setup_memory(&mem_timings, is_resume); - - primitive_mem_test(); - - trustzone_init(); - - if (is_resume) { - wakeup(); - } - - setup_gpio(); - setup_ec(); - - simple_spi_test(); - /* Set SPI (primary CBFS media) clock to 50MHz. */ - /* if this is uncommented SPI will not work correctly. */ - clock_set_rate(PERIPH_ID_SPI1, 50000000); - exynos_pinmux_spi1(); - simple_spi_test(); - - cbmem_initialize_empty(); - - entry = cbfs_load_stage(CBFS_DEFAULT_MEDIA, "fallback/ramstage"); - simple_spi_test(); - stage_exit(entry); -} diff --git a/src/mainboard/google/pit/wakeup.c b/src/mainboard/google/pit/wakeup.c deleted file mode 100644 index 130282cb64..0000000000 --- a/src/mainboard/google/pit/wakeup.c +++ /dev/null @@ -1,28 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright 2013 Google Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include -#include - -int wakeup_need_reset(void) -{ - /* The "wake up" event is not reliable (known as "bad wakeup") and needs - * reset if the TPM reset mask GPIO value is high. */ - return gpio_get_value(GPIO_X06); -} -- cgit v1.2.3