From 043eb0e35f93b41348eb69061a6aa0355ef544bc Mon Sep 17 00:00:00 2001 From: Stefan Reinauer Date: Fri, 10 May 2013 16:21:58 -0700 Subject: Wield battle axe at ARM port This patch unfortunately incorporates a number of changes, all of which are making future ARM ports easier. - drop cruft that came in with u-boot - move serial console from mainboard Kconfig to Exynos Kconfig - factor out non-board specific wakeup code - move generic bootblock code from mainboard to Exynos - actually call arch_cpu_init() - remove dead code - fix up copyright messages - remove snow_ prefix from a lot of code to reduce the noise when creating a new mainboard based on that code. Change-Id: Ic05326edf5a7e1a691c5ff841a604cb9e351b562 Signed-off-by: Stefan Reinauer Signed-off-by: Gabe Black Reviewed-on: http://review.coreboot.org/3640 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer --- src/arch/armv7/include/common.h | 13 -- src/cpu/samsung/exynos5-common/cpu.h | 23 +--- src/cpu/samsung/exynos5-common/cpu_info.c | 80 ++----------- src/cpu/samsung/exynos5-common/exynos5-common.h | 153 +----------------------- src/cpu/samsung/exynos5250/Kconfig | 38 ++++++ src/cpu/samsung/exynos5250/Makefile.inc | 2 + src/cpu/samsung/exynos5250/bootblock.c | 20 ++++ src/cpu/samsung/exynos5250/cpu.c | 3 + src/cpu/samsung/exynos5250/wakeup.c | 52 ++++++++ src/cpu/samsung/exynos5250/wakeup.h | 37 ++++++ src/mainboard/google/snow/Kconfig | 117 +----------------- src/mainboard/google/snow/Makefile.inc | 3 +- src/mainboard/google/snow/bootblock.c | 49 -------- src/mainboard/google/snow/devicetree.cb | 2 +- src/mainboard/google/snow/exynos5250.h | 33 +++++ src/mainboard/google/snow/mainboard.c | 50 ++++---- src/mainboard/google/snow/mainboard.h | 33 ----- src/mainboard/google/snow/memory.c | 38 +++--- src/mainboard/google/snow/romstage.c | 52 ++++---- src/mainboard/google/snow/wakeup.c | 31 +---- 20 files changed, 272 insertions(+), 557 deletions(-) create mode 100644 src/cpu/samsung/exynos5250/wakeup.c create mode 100644 src/cpu/samsung/exynos5250/wakeup.h delete mode 100644 src/mainboard/google/snow/bootblock.c create mode 100644 src/mainboard/google/snow/exynos5250.h delete mode 100644 src/mainboard/google/snow/mainboard.h (limited to 'src') diff --git a/src/arch/armv7/include/common.h b/src/arch/armv7/include/common.h index c02581338f..9cb9e47de2 100644 --- a/src/arch/armv7/include/common.h +++ b/src/arch/armv7/include/common.h @@ -285,9 +285,6 @@ int checkicache (void); int checkdcache (void); void upmconfig (unsigned int, unsigned int *, unsigned int); unsigned long get_tbclk (void); -#if defined (CONFIG_OF_LIBFDT) && defined (CONFIG_OF_BOARD_SETUP) -void ft_cpu_setup(void *blob, bd_t *bd); -#endif /* $(CPU)/serial.c */ @@ -412,9 +409,6 @@ int strcmp_compar(const void *, const void *); /* lib/time.c */ void udelay (unsigned long); -/* lib/strmhz.c */ -char * strmhz(char *buf, unsigned long hz); - /* Multicore arch functions */ #ifdef CONFIG_MP int cpu_status(int nr); @@ -427,13 +421,6 @@ int cpu_release(int nr, int argc, char * const argv[]); /* Put only stuff here that the assembler can digest */ -#ifdef CONFIG_POST -#define CONFIG_HAS_POST -#ifndef CONFIG_POST_ALT_LIST -#define CONFIG_POST_STD_LIST -#endif -#endif - #define ROUND(a,b) (((a) + (b) - 1) & ~((b) - 1)) #define DIV_ROUND(n,d) (((n) + ((d)/2)) / (d)) #define DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d)) diff --git a/src/cpu/samsung/exynos5-common/cpu.h b/src/cpu/samsung/exynos5-common/cpu.h index 3a1df21cd0..8856ddb71a 100644 --- a/src/cpu/samsung/exynos5-common/cpu.h +++ b/src/cpu/samsung/exynos5-common/cpu.h @@ -61,23 +61,6 @@ #include -/* CPU detection macros */ -extern unsigned int s5p_cpu_id; - -inline void s5p_set_cpu_id(void); - -#define IS_SAMSUNG_TYPE(type, id) \ -static inline int cpu_is_##type(void) \ -{ \ - return s5p_cpu_id == id ? 1 : 0; \ -} - -IS_SAMSUNG_TYPE(s5pc100, 0xc100) -IS_SAMSUNG_TYPE(s5pc110, 0xc110) - -int s5p_get_cpu_rev(void); -//void s5p_set_cpu_id(void); -int s5p_get_cpu_id(void); #define DEVICE_NOT_AVAILABLE 0 @@ -132,9 +115,6 @@ enum boot_mode exynos_get_boot_device(void); */ int board_wakeup_permitted(void); -#define cpu_is_exynos4() (s5p_get_cpu_id() == 0xc210) -#define cpu_is_exynos5() (s5p_get_cpu_id() == 0xc520) - /** * Init subsystems according to the reset status * @@ -142,4 +122,7 @@ int board_wakeup_permitted(void); */ int lowlevel_init_subsystems(void); +int arch_cpu_init(void); + + #endif /* _EXYNOS_COMMON_CPU_H */ diff --git a/src/cpu/samsung/exynos5-common/cpu_info.c b/src/cpu/samsung/exynos5-common/cpu_info.c index 6b75473656..ca9454ef61 100644 --- a/src/cpu/samsung/exynos5-common/cpu_info.c +++ b/src/cpu/samsung/exynos5-common/cpu_info.c @@ -20,13 +20,9 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ + +#include #include -#if 0 -#include -#include -#include -#include -#endif #include #include @@ -39,31 +35,10 @@ /* FIXME(dhendrix): consolidate samsung ID code/#defines to a common location */ #include /* cpu_info_init() prototype */ -/* - * The following CPU infos are initialized in lowlevel_init(). They should be - * put in the .data section. Otherwise, a compile will put them in the .bss - * section since they don't have initial values. The relocation code which - * runs after lowlevel_init() will reset them to zero. - */ -unsigned int s5p_cpu_id __attribute__((section(".data"))); -unsigned int s5p_cpu_rev __attribute__((section(".data"))); - -void cpu_info_init(void) -{ - s5p_set_cpu_id(); -} - -int s5p_get_cpu_id(void) -{ - return s5p_cpu_id; -} - -int s5p_get_cpu_rev(void) -{ - return s5p_cpu_rev; -} +static unsigned int s5p_cpu_id; +static unsigned int s5p_cpu_rev; -void s5p_set_cpu_id(void) +static void s5p_set_cpu_id(void) { s5p_cpu_id = readl((void *)EXYNOS_PRO_ID); s5p_cpu_id = (0xC000 | ((s5p_cpu_id & 0x00FFF000) >> 12)); @@ -80,49 +55,12 @@ void s5p_set_cpu_id(void) } } -#ifdef CONFIG_DISPLAY_CPUINFO -int print_cpuinfo(void) -{ - char buf[32]; - - printf("CPU: S5P%X @ %sMHz\n", - s5p_cpu_id, strmhz(buf, get_arm_clk())); - - return 0; -} -#endif - -#if 0 -void board_show_dram(ulong size) -{ - enum ddr_mode mem_type; - unsigned frequency_mhz; - unsigned arm_freq; - enum mem_manuf mem_manuf; - char buf[32]; - int ret; - - /* Get settings from the fdt */ - ret = clock_get_mem_selection(&mem_type, &frequency_mhz, - &arm_freq, &mem_manuf); - if (ret) - panic("Invalid DRAM information"); - - puts("DRAM: "); - print_size(size, " "); - printf("%s %s @ %sMHz", - clock_get_mem_manuf_name(mem_manuf), - clock_get_mem_type_name(mem_type), - strmhz(buf, frequency_mhz)); - putc('\n'); -} -#endif - -#ifdef CONFIG_ARCH_CPU_INIT int arch_cpu_init(void) { - cpu_info_init(); + s5p_set_cpu_id(); + + printk(BIOS_INFO, "CPU: S5P%X @ %ldMHz\n", + s5p_cpu_id, get_arm_clk() / (1024*1024)); return 0; } -#endif diff --git a/src/cpu/samsung/exynos5-common/exynos5-common.h b/src/cpu/samsung/exynos5-common/exynos5-common.h index b510d68ce0..b2957bfc62 100644 --- a/src/cpu/samsung/exynos5-common/exynos5-common.h +++ b/src/cpu/samsung/exynos5-common/exynos5-common.h @@ -22,175 +22,24 @@ * MA 02111-1307 USA */ -/* TODO(dhendrix): some #defines are commented out here and moved to Kconfig */ - #ifndef __EXYNOS5_CONFIG_H #define __EXYNOS5_CONFIG_H -/* High Level Configuration Options */ -#define CONFIG_SAMSUNG /* in a SAMSUNG core */ -#define CONFIG_S5P /* S5P Family */ -#define CONFIG_EXYNOS5 /* which is in a Exynos5 Family */ -#define BUILD_PART_FS_STUFF 1 /* Disk Partition Support */ - -#define CONFIG_ARCH_CPU_INIT /* Used to check cpu type */ - #include /* get chip and board defs */ -/* Align LCD to 1MB boundary */ -#define CONFIG_LCD_ALIGNMENT MMU_SECTION_SIZE - -#define CONFIG_DISPLAY_CPUINFO -#define CONFIG_DISPLAY_BOARDINFO_LATE -#define CONFIG_SYS_CONSOLE_INFO_QUIET -#define CONFIG_BOARD_LATE_INIT - -#define CONFIG_CMD_SHA256 -//#define CONFIG_EXYNOS_ACE_SHA +/* TODO(dhendrix): some #defines are commented out here and moved to Kconfig */ //#define CONFIG_SYS_SDRAM_BASE 0x40000000 //#define CONFIG_SYS_TEXT_BASE 0x43e00000 -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_CMDLINE_TAG -#define CONFIG_INITRD_TAG -#define CONFIG_CMDLINE_EDITING - /* Power Down Modes */ #define S5P_CHECK_SLEEP 0x00000BAD #define S5P_CHECK_DIDLE 0xBAD00000 #define S5P_CHECK_LPA 0xABAD0000 -/* Offset for inform registers */ -#define INFORM0_OFFSET 0x800 -#define INFORM1_OFFSET 0x804 - -/* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (4 << 20)) - -/* select serial console configuration */ -#define CONFIG_SERIAL_MULTI -//#define CONFIG_BAUDRATE 115200 -#define EXYNOS5_DEFAULT_UART_OFFSET 0x010000 - -#define CONFIG_BOARD_EARLY_INIT_F - -/* PWM */ -#define CONFIG_PWM - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -/* SPL */ -#define CONFIG_SPL -#define CONFIG_SPL_GPIO_SUPPORT -#define CONFIG_SPL_POWER_SUPPORT -#define CONFIG_SPL_I2C_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_LIBCOMMON_SUPPORT - -/* Number of GPIOS to use for board revision detection */ -#define CONFIG_BOARD_REV_GPIO_COUNT 2 - -/* Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -/* memtest works on */ -#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5E00000) -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000) - #define CONFIG_SYS_HZ 1000 -/* valid baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - -/* Stack sizes */ -#define CONFIG_STACKSIZE (256 << 10) /* 256KB */ - -#define CONFIG_SYS_MONITOR_BASE 0x00000000 - -#ifdef CONFIG_SPI_FLASH -/* Enable SPI H/W Controller Driver support */ -#define CONFIG_EXYNOS_SPI - -/* FIXME(dhendrix): We should be concerned with SPI flash parts here... */ -#if 0 -#define CONFIG_CMD_SF -#define CONFIG_CMD_SPI -#define CONFIG_SPI_FLASH_WINBOND -/* Enable Gigadevice SPI flash support for Snow board */ -#define CONFIG_SPI_FLASH_GIGADEVICE -#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 -/* Set speed for SPI flash */ -#define CONFIG_SF_DEFAULT_SPEED 50000000 -#endif -#endif - -/* FLASH and environment organization */ -#define CONFIG_SYS_NO_FLASH -#undef CONFIG_CMD_IMLS - -#define CONFIG_SECURE_BL1_ONLY - -/* Secure FW size configuration */ -#ifdef CONFIG_SECURE_BL1_ONLY -#define CONFIG_SEC_FW_SIZE (8 << 10) /* 8KB */ -#else -#define CONFIG_SEC_FW_SIZE 0 -#endif - -/* Configuration of BL1, BL2, ENV Blocks on mmc */ -#define CONFIG_RES_BLOCK_SIZE (512) -#define CONFIG_BL1_SIZE (16 << 10) /*16 K reserved for BL1*/ -#define CONFIG_BL2_SIZE (512UL << 10UL) /* 512 KB */ -#define CONFIG_ENV_SIZE (16 << 10) /* 16 KB */ - -#define CONFIG_BL1_OFFSET (CONFIG_RES_BLOCK_SIZE + CONFIG_SEC_FW_SIZE) -#define CONFIG_BL2_OFFSET (CONFIG_BL1_OFFSET + CONFIG_BL1_SIZE) - -#define SPI_FLASH_UBOOT_POS (CONFIG_SEC_FW_SIZE + CONFIG_BL1_SIZE) - -#ifdef CONFIG_ENV_IS_IN_SPI_FLASH -#define CONFIG_ENV_SPI_MODE SPI_MODE_0 -#define CONFIG_ENV_OFFSET (CONFIG_SEC_FW_SIZE + CONFIG_BL1_SIZE + \ - CONFIG_BL2_SIZE) -#define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE -#define CONFIG_ENV_SPI_BUS 1 -#else /* CONFIG_ENV_IS_IN_MMC */ -#define CONFIG_ENV_OFFSET (CONFIG_BL2_OFFSET + CONFIG_BL2_SIZE) -#endif - -/* U-boot copy size from boot Media to DRAM.*/ -#define BL2_START_OFFSET (CONFIG_BL2_OFFSET/512) - -/* Set the emmc bus width to 8 */ -#define CONFIG_MSHCI_BUS_WIDTH 8 -#define CONFIG_MSHCI_PERIPH_ID PERIPH_ID_SDMMC0 - -#if BUILD_PART_FS_STUFF -#define CONFIG_DOS_PARTITION -#define CONFIG_EFI_PARTITION -#endif - -/* Enable devicetree support */ -#define CONFIG_OF_LIBFDT - -#define CONFIG_SYS_THUMB_BUILD - /* We spend about 100us getting from reset to SPL */ #define CONFIG_SPL_TIME_US 100000 -/* Stringify a token */ -#ifndef STRINGIFY -#define _STRINGIFY(x) #x -#define STRINGIFY(x) _STRINGIFY(x) -#endif - #endif /* __EXYNOS5_CONFIG_H */ diff --git a/src/cpu/samsung/exynos5250/Kconfig b/src/cpu/samsung/exynos5250/Kconfig index cc67abd6ff..eaf6668da6 100644 --- a/src/cpu/samsung/exynos5250/Kconfig +++ b/src/cpu/samsung/exynos5250/Kconfig @@ -97,3 +97,41 @@ config SYS_TEXT_BASE config COREBOOT_TABLES_SIZE hex default 0x4000000 + +choice CONSOLE_SERIAL_UART_CHOICES + prompt "Serial Console UART" + default CONSOLE_SERIAL_UART3 + depends on CONSOLE_SERIAL_UART + +config CONSOLE_SERIAL_UART0 + bool "UART0" + help + Serial console on UART0 + +config CONSOLE_SERIAL_UART1 + bool "UART1" + help + Serial console on UART1 + +config CONSOLE_SERIAL_UART2 + bool "UART2" + help + Serial console on UART2 + +config CONSOLE_SERIAL_UART3 + bool "UART3" + help + Serial console on UART3 + +endchoice + +config CONSOLE_SERIAL_UART_ADDRESS + hex + depends on CONSOLE_SERIAL_UART + default 0x12c00000 if CONSOLE_SERIAL_UART0 + default 0x12c10000 if CONSOLE_SERIAL_UART1 + default 0x12c20000 if CONSOLE_SERIAL_UART2 + default 0x12c30000 if CONSOLE_SERIAL_UART3 + help + Map the UART names to the respective MMIO address. + diff --git a/src/cpu/samsung/exynos5250/Makefile.inc b/src/cpu/samsung/exynos5250/Makefile.inc index 2cd34284b4..6449714a51 100644 --- a/src/cpu/samsung/exynos5250/Makefile.inc +++ b/src/cpu/samsung/exynos5250/Makefile.inc @@ -10,6 +10,7 @@ bootblock-$(CONFIG_EARLY_CONSOLE) += clock.c bootblock-$(CONFIG_EARLY_CONSOLE) += monotonic_timer.c bootblock-$(CONFIG_EARLY_CONSOLE) += soc.c bootblock-$(CONFIG_EARLY_CONSOLE) += uart.c +bootblock-y += wakeup.c romstage-y += clock.c romstage-y += clock_init.c @@ -21,6 +22,7 @@ romstage-y += mct.c romstage-y += monotonic_timer.c romstage-$(CONFIG_EARLY_CONSOLE) += soc.c romstage-$(CONFIG_EARLY_CONSOLE) += uart.c +romstage-y += wakeup.c #ramstage-y += tzpc_init.c ramstage-y += clock.c diff --git a/src/cpu/samsung/exynos5250/bootblock.c b/src/cpu/samsung/exynos5250/bootblock.c index 949468fbef..e4d0f6c202 100644 --- a/src/cpu/samsung/exynos5250/bootblock.c +++ b/src/cpu/samsung/exynos5250/bootblock.c @@ -17,7 +17,27 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ +#include +#include "clk.h" +#include "wakeup.h" + void bootblock_cpu_init(void); void bootblock_cpu_init(void) { + /* kick off the multi-core timer. + * We want to do this as early as we can. + */ + mct_start(); + + if (get_wakeup_state() == WAKEUP_DIRECT) { + wakeup(); + /* Never returns. */ + } + + /* For most ARM systems, we have to initialize firmware media source + * (ex, SPI, SD/MMC, or eMMC) now; but for Exynos platform, that is + * already handled by iROM so there's no need to setup again. + */ + + console_init(); } diff --git a/src/cpu/samsung/exynos5250/cpu.c b/src/cpu/samsung/exynos5250/cpu.c index 8bf0d49f96..c49dec453d 100644 --- a/src/cpu/samsung/exynos5250/cpu.c +++ b/src/cpu/samsung/exynos5250/cpu.c @@ -8,6 +8,7 @@ #include #include #include +#include #include "chip.h" #include "cpu.h" @@ -97,6 +98,8 @@ static void cpu_init(device_t dev) { exynos_displayport_init(dev); ram_resource(dev, 0, RAM_BASE_KB, RAM_SIZE_KB); + + arch_cpu_init(); } static void cpu_noop(device_t dev) diff --git a/src/cpu/samsung/exynos5250/wakeup.c b/src/cpu/samsung/exynos5250/wakeup.c new file mode 100644 index 0000000000..1e8d892bc8 --- /dev/null +++ b/src/cpu/samsung/exynos5250/wakeup.c @@ -0,0 +1,52 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Google, Inc. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include + +#include "wakeup.h" + +void wakeup(void) +{ + if (wakeup_need_reset()) + power_reset(); + + power_init(); /* Ensure ps_hold_setup() for early wakeup. */ + power_exit_wakeup(); + /* Should never return. */ + die("Failed to wake up.\n"); +} + +int get_wakeup_state(void) +{ + uint32_t status = power_read_reset_status(); + + /* DIDLE/LPA can be resumed without clock reset (ex, bootblock), + * and SLEEP requires resetting clock (should be done in ROM stage). + */ + + if (status == S5P_CHECK_DIDLE || status == S5P_CHECK_LPA) + return WAKEUP_DIRECT; + + if (status == S5P_CHECK_SLEEP) + return WAKEUP_NEED_CLOCK_RESET; + + return IS_NOT_WAKEUP; +} diff --git a/src/cpu/samsung/exynos5250/wakeup.h b/src/cpu/samsung/exynos5250/wakeup.h new file mode 100644 index 0000000000..ed49d687f6 --- /dev/null +++ b/src/cpu/samsung/exynos5250/wakeup.h @@ -0,0 +1,37 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Google, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef WAKEUP_H +#define WAKEUP_H + +enum { + // A normal boot (not suspend/resume) + IS_NOT_WAKEUP, + // A wake up event that can be resumed any time + WAKEUP_DIRECT, + // A wake up event that must be resumed only after + // clock and memory controllers are re-initialized + WAKEUP_NEED_CLOCK_RESET, +}; + +int wakeup_need_reset(void); +int get_wakeup_state(void); +void wakeup(void); + +#endif /* WAKEUP_H */ diff --git a/src/mainboard/google/snow/Kconfig b/src/mainboard/google/snow/Kconfig index 4072b0fb6f..12b11807c3 100644 --- a/src/mainboard/google/snow/Kconfig +++ b/src/mainboard/google/snow/Kconfig @@ -28,7 +28,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy select EC_GOOGLE_CHROMEEC_I2C select BOARD_ROMSIZE_KB_4096 select DRIVER_MAXIM_MAX77686 -# select HAVE_ACPI_TABLES select EXYNOS_DISPLAYPORT select CHROMEOS select DRIVER_TI_TPS65090 @@ -41,132 +40,18 @@ config MAINBOARD_DIR config MAINBOARD_PART_NUMBER string - default "SNOW" - -#config MMCONF_BASE_ADDRESS -# hex -# default 0xf0000000 - -#config IRQ_SLOT_COUNT -# int -# default 18 + default "Snow" config MAX_CPUS int default 2 -config MAINBOARD_VENDOR - string - default "Samsung" - -config BOOTBLOCK_MAINBOARD_INIT - string - default "mainboard/google/snow/bootblock.c" - config DRAM_SIZE_MB int default 2048 -config NR_DRAM_BANKS - int - default 1 - -choice CONSOLE_SERIAL_UART_CHOICES - prompt "Serial Console UART" - default CONSOLE_SERIAL_UART3 - depends on CONSOLE_SERIAL_UART - -config CONSOLE_SERIAL_UART0 - bool "UART0" - help - Serial console on UART0 - -config CONSOLE_SERIAL_UART1 - bool "UART1" - help - Serial console on UART1 - -config CONSOLE_SERIAL_UART2 - bool "UART2" - help - Serial console on UART2 - -config CONSOLE_SERIAL_UART3 - bool "UART3" - help - Serial console on UART3 - -endchoice - -config CONSOLE_SERIAL_UART_ADDRESS - hex - depends on CONSOLE_SERIAL_UART - default 0x12c00000 if CONSOLE_SERIAL_UART0 - default 0x12c10000 if CONSOLE_SERIAL_UART1 - default 0x12c20000 if CONSOLE_SERIAL_UART2 - default 0x12c30000 if CONSOLE_SERIAL_UART3 - help - Map the UART names to the respective MMIO address. - config EC_GOOGLE_CHROMEEC_I2C_BUS hex default 4 -################################################################# -# stuff from smdk5250.h # -# FIXME: can we move some of these to exynos5250's Kconfig? # -################################################################# -config SYS_I2C_SPEED - int - default 100000 - -config SYS_I2C_SLAVE - hex - default 0x0 - -config I2C_MULTI_BUS - bool - default y - -#config HARD_I2C -# bool -# default y -#CMD_I2C -#I2C_EDID -#DRIVER_S3C24X0_I2C - -config VDD_ARM_MV - int - default 1300 #1.3V - -config VDD_INT_UV - int - default 1012500 # 1.0125v - -config VDD_MIF_MV - int - default 1000 # 1.0v - -config VDD_G3D_MV - int - default 1200 # 1.2v - -config VDD_LDO2_MV - int - default 1500 # 1.5v - -config VDD_LDO3_MV - int - default 1800 # 1.8v - -config VDD_LDO5_MV - int - default 1800 # 1.8v - -config VDD_LDO10_MV - int - default 1800 # 1.8v - -######### smdk5250.h ######## - endif # BOARD_GOOGLE_SNOW diff --git a/src/mainboard/google/snow/Makefile.inc b/src/mainboard/google/snow/Makefile.inc index 69bc9ba97b..96496628c9 100644 --- a/src/mainboard/google/snow/Makefile.inc +++ b/src/mainboard/google/snow/Makefile.inc @@ -1,7 +1,7 @@ ## ## This file is part of the coreboot project. ## -## Copyright (C) 2012 The ChromiumOS Authors. All rights reserved. +## Copyright (C) 2012 Google Inc. ## ## This program is free software; you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by @@ -23,6 +23,5 @@ romstage-y += memory.c romstage-y += romstage.c romstage-y += wakeup.c -# ramstage-y += ec.c ramstage-y += mainboard.c ramstage-y += chromeos.c diff --git a/src/mainboard/google/snow/bootblock.c b/src/mainboard/google/snow/bootblock.c deleted file mode 100644 index 56c2650f7a..0000000000 --- a/src/mainboard/google/snow/bootblock.c +++ /dev/null @@ -1,49 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013 The ChromiumOS Authors. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include "mainboard.h" - -void bootblock_mainboard_init(void); -void bootblock_mainboard_init(void) -{ - /* kick off the multi-core timer. - * We want to do this as early as we can. - */ - mct_start(); - - if (snow_get_wakeup_state() == SNOW_WAKEUP_DIRECT) { - snow_wakeup(); - /* Never returns. */ - } - - /* For most ARM systems, we have to initialize firmware media source - * (ex, SPI, SD/MMC, or eMMC) now; but for Exynos platform, that is - * already handled by iROM so there's no need to setup again. - */ - - console_init(); -} diff --git a/src/mainboard/google/snow/devicetree.cb b/src/mainboard/google/snow/devicetree.cb index 41ed45e4dd..deebbf4cd2 100644 --- a/src/mainboard/google/snow/devicetree.cb +++ b/src/mainboard/google/snow/devicetree.cb @@ -1,7 +1,7 @@ ## ## This file is part of the coreboot project. ## -## Copyright (C) 2012 The ChromiumOS Authors. All rights reserved. +## Copyright (C) 2012 Google Inc. ## ## This program is free software; you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by diff --git a/src/mainboard/google/snow/exynos5250.h b/src/mainboard/google/snow/exynos5250.h new file mode 100644 index 0000000000..998d9ee32e --- /dev/null +++ b/src/mainboard/google/snow/exynos5250.h @@ -0,0 +1,33 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Google, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* I2C */ +#define I2C_0_SPEED 100000 +#define I2C_SLAVE 0 + +/* Voltages */ +#define VDD_ARM_MV 1300 // 1.3V +#define VDD_INT_UV 1012500 // 1.0125V +#define VDD_MIF_MV 1000 // 1.0V +#define VDD_G3D_MV 1200 // 1.2V +#define VDD_LDO2_MV 1500 // 1.5V +#define VDD_LDO3_MV 1800 // 1.8V +#define VDD_LDO5_MV 1800 // 1.8V +#define VDD_LDO10_MV 1800 // 1.8V + diff --git a/src/mainboard/google/snow/mainboard.c b/src/mainboard/google/snow/mainboard.c index f4c8e6cf13..197735e7d3 100644 --- a/src/mainboard/google/snow/mainboard.c +++ b/src/mainboard/google/snow/mainboard.c @@ -1,10 +1,11 @@ /* - * Copyright (C) 2012 Google Inc. + * This file is part of the coreboot project. * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. + * Copyright (C) 2013 Google, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of @@ -13,8 +14,7 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ #include @@ -38,13 +38,14 @@ #include #include +#include "exynos5250.h" /* convenient shorthand (in MB) */ #define DRAM_START (CONFIG_SYS_SDRAM_BASE >> 20) #define DRAM_SIZE CONFIG_DRAM_SIZE_MB #define DRAM_END (DRAM_START + DRAM_SIZE) /* plus one... */ -static struct edid snow_edid = { +static struct edid edid = { .ha = 1366, .va = 768, .bpp = 16, @@ -114,14 +115,14 @@ static void exynos_dp_reset(void) #define LCD_T5_DELAY_MS 10 #define LCD_T6_DELAY_MS 10 -static void snow_backlight_pwm(void) +static void backlight_pwm(void) { /*Configure backlight PWM as a simple output high (100% brightness) */ gpio_direction_output(GPIO_B20, 1); udelay(LCD_T6_DELAY_MS * 1000); } -static void snow_backlight_en(void) +static void backlight_en(void) { /* * Configure GPIO for LCD_BL_EN */ gpio_direction_output(GPIO_X30, 1); @@ -132,13 +133,13 @@ static void snow_backlight_en(void) #define FET1_CTRL 0x0f #define FET6_CTRL 0x14 -static void snow_lcd_vdd(void) +static void lcd_vdd(void) { /* Enable FET6, lcd panel */ tps65090_fet_enable(TPS69050_BUS, FET6_CTRL); } -static void snow_backlight_vdd(void) +static void backlight_vdd(void) { /* Enable FET1, backlight */ tps65090_fet_enable(TPS69050_BUS, FET1_CTRL); @@ -146,7 +147,7 @@ static void snow_backlight_vdd(void) } //static struct video_info smdk5250_dp_config = { -static struct video_info snow_dp_video_info = { +static struct video_info dp_video_info = { /* FIXME: fix video_info struct to use const for name */ .name = (char *)"eDP-LVDS NXP PTN3460", @@ -165,7 +166,7 @@ static struct video_info snow_dp_video_info = { /* FIXME: move some place more appropriate */ #define EXYNOS5250_DP1_BASE 0x145b0000 -#define SNOW_MAX_DP_TRIES 5 +#define MAX_DP_TRIES 5 /* * This function disables the USB3.0 PLL to save power @@ -183,12 +184,12 @@ static void mainboard_init(device_t dev) int dp_tries; struct s5p_dp_device dp_device = { .base = (struct exynos5_dp *)EXYNOS5250_DP1_BASE, - .video_info = &snow_dp_video_info, + .video_info = &dp_video_info, }; void *fb_addr; - i2c_init(TPS69050_BUS, CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); - i2c_init(7, CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); + i2c_init(TPS69050_BUS, I2C_0_SPEED, I2C_SLAVE); + i2c_init(7, I2C_0_SPEED, I2C_SLAVE); tmu_init(&exynos5250_tmu_info); @@ -199,15 +200,15 @@ static void mainboard_init(device_t dev) disable_usb30_pll(); fb_addr = cbmem_find(CBMEM_ID_CONSOLE); - set_vbe_mode_info_valid(&snow_edid, (uintptr_t)(fb_addr) + 64*KiB); + set_vbe_mode_info_valid(&edid, (uintptr_t)(fb_addr) + 64*KiB); - snow_lcd_vdd(); + lcd_vdd(); do { udelay(50); } while (!exynos_dp_hotplug()); exynos_dp_bridge_setup(); - for (dp_tries = 1; dp_tries <= SNOW_MAX_DP_TRIES; dp_tries++) { + for (dp_tries = 1; dp_tries <= MAX_DP_TRIES; dp_tries++) { exynos_dp_bridge_init(); if (exynos_dp_hotplug()) { exynos_dp_reset(); @@ -219,14 +220,14 @@ static void mainboard_init(device_t dev) udelay(LCD_T3_DELAY_MS * 1000); - snow_backlight_vdd(); - snow_backlight_pwm(); - snow_backlight_en(); + backlight_vdd(); + backlight_pwm(); + backlight_en(); /* if we're here, we're successful */ break; } - if (dp_tries > SNOW_MAX_DP_TRIES) + if (dp_tries > MAX_DP_TRIES) printk(BIOS_ERR, "%s: Failed to set up displayport\n", __func__); } @@ -235,6 +236,7 @@ static void mainboard_enable(device_t dev) dev->ops->init = &mainboard_init; /* set up coreboot tables */ + /* FIXME: this should happen somewhere else */ high_tables_size = CONFIG_COREBOOT_TABLES_SIZE; high_tables_base = CONFIG_SYS_SDRAM_BASE + ((unsigned)CONFIG_DRAM_SIZE_MB << 20ULL) - diff --git a/src/mainboard/google/snow/mainboard.h b/src/mainboard/google/snow/mainboard.h deleted file mode 100644 index a91bed49da..0000000000 --- a/src/mainboard/google/snow/mainboard.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * Copyright (C) 2013 Google Inc. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef MAINBOARD_H -#define MAINBOARD_H -enum { - SNOW_IS_NOT_WAKEUP, // A normal boot (not suspend/resume). - SNOW_WAKEUP_DIRECT, // A wake up event that can be resumed any time. - SNOW_WAKEUP_NEED_CLOCK_RESET, // A wake up event that must be resumed - // only after clock and memory - // controllers are re-initialized. -}; - -int snow_get_wakeup_state(void); -void snow_wakeup(void); - -#endif /* MAINBOARD_H */ diff --git a/src/mainboard/google/snow/memory.c b/src/mainboard/google/snow/memory.c index 0f72e69ff8..fc5a7bde73 100644 --- a/src/mainboard/google/snow/memory.c +++ b/src/mainboard/google/snow/memory.c @@ -1,9 +1,8 @@ /* - * This file is part of the coreboot project. It is based off code - * from Das U-Boot. + * This file is part of the coreboot project. * * Copyright (C) 2012 Samsung Electronics - * Copyright (C) 2013 The ChromiumOS Authors. + * Copyright (C) 2013 Google Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -30,8 +29,6 @@ #include #include -#include "mainboard.h" - const struct mem_timings mem_timings[] = { { .mem_manuf = MEM_MANUF_ELPIDA, @@ -453,10 +450,10 @@ const struct mem_timings mem_timings[] = { } }; -#define SNOW_BOARD_ID0_GPIO 88 /* GPD0, pin 0 */ -#define SNOW_BOARD_ID1_GPIO 89 /* GPD0, pin 1 */ +#define BOARD_ID0_GPIO 88 /* GPD0, pin 0 */ +#define BOARD_ID1_GPIO 89 /* GPD0, pin 1 */ -enum snow_board_config { +enum board_config { SNOW_CONFIG_UNKNOWN = -1, SNOW_CONFIG_SAMSUNG_EVT, SNOW_CONFIG_ELPIDA_EVT, @@ -471,8 +468,8 @@ enum snow_board_config { struct { enum mvl3 id0, id1; - enum snow_board_config config; -} snow_id_map[] = { + enum board_config config; +} id_map[] = { /* ID0 ID1 config */ { LOGIC_0, LOGIC_0, SNOW_CONFIG_SAMSUNG_MP }, { LOGIC_0, LOGIC_1, SNOW_CONFIG_ELPIDA_MP }, @@ -489,17 +486,17 @@ static int board_get_config(void) { int i; int id0, id1; - enum snow_board_config config = SNOW_CONFIG_UNKNOWN; + enum board_config config = SNOW_CONFIG_UNKNOWN; - id0 = gpio_read_mvl3(SNOW_BOARD_ID0_GPIO); - id1 = gpio_read_mvl3(SNOW_BOARD_ID1_GPIO); + id0 = gpio_read_mvl3(BOARD_ID0_GPIO); + id1 = gpio_read_mvl3(BOARD_ID1_GPIO); if (id0 < 0 || id1 < 0) return -1; printk(BIOS_DEBUG, "%s: id0: %u, id1: %u\n", __func__, id0, id1); - for (i = 0; i < ARRAY_SIZE(snow_id_map); i++) { - if (id0 == snow_id_map[i].id0 && id1 == snow_id_map[i].id1) { - config = snow_id_map[i].config; + for (i = 0; i < ARRAY_SIZE(id_map); i++) { + if (id0 == id_map[i].id0 && id1 == id_map[i].id1) { + config = id_map[i].config; break; } } @@ -507,18 +504,17 @@ static int board_get_config(void) return config; } - struct mem_timings *get_mem_timings(void) { int i; - enum snow_board_config board_config; + enum board_config config; enum ddr_mode mem_type; unsigned int frequency_mhz; enum mem_manuf mem_manuf; const struct mem_timings *mem; - board_config = board_get_config(); - switch (board_config) { + config = board_get_config(); + switch (config) { case SNOW_CONFIG_ELPIDA_EVT: case SNOW_CONFIG_ELPIDA_DVT: case SNOW_CONFIG_ELPIDA_PVT: @@ -536,7 +532,7 @@ struct mem_timings *get_mem_timings(void) frequency_mhz = 800; break; default: - printk(BIOS_CRIT, "Unable to determine board config\n"); + printk(BIOS_CRIT, "Unknown board configuration.\n"); return NULL; } diff --git a/src/mainboard/google/snow/romstage.c b/src/mainboard/google/snow/romstage.c index 508dac6590..3894f5a743 100644 --- a/src/mainboard/google/snow/romstage.c +++ b/src/mainboard/google/snow/romstage.c @@ -34,25 +34,26 @@ #include #include #include +#include #include #include #include #include -#include "mainboard.h" +#include "exynos5250.h" #define PMIC_BUS 0 #define MMC0_GPIO_PIN (58) -static void snow_setup_power(void) +static void setup_power(void) { int error = 0; power_init(); /* Initialize I2C bus to configure PMIC. */ - i2c_init(0, CONFIG_SYS_I2C_SPEED, 0x00); + i2c_init(0, I2C_0_SPEED, 0x00); printk(BIOS_DEBUG, "%s: Setting up PMIC...\n", __func__); /* @@ -67,21 +68,21 @@ static void snow_setup_power(void) */ error = max77686_disable_backup_batt(PMIC_BUS); - error |= max77686_volsetting(PMIC_BUS, PMIC_BUCK2, CONFIG_VDD_ARM_MV, + error |= max77686_volsetting(PMIC_BUS, PMIC_BUCK2, VDD_ARM_MV, REG_ENABLE, MAX77686_MV); - error |= max77686_volsetting(PMIC_BUS, PMIC_BUCK3, CONFIG_VDD_INT_UV, + error |= max77686_volsetting(PMIC_BUS, PMIC_BUCK3, VDD_INT_UV, REG_ENABLE, MAX77686_UV); - error |= max77686_volsetting(PMIC_BUS, PMIC_BUCK1, CONFIG_VDD_MIF_MV, + error |= max77686_volsetting(PMIC_BUS, PMIC_BUCK1, VDD_MIF_MV, REG_ENABLE, MAX77686_MV); - error |= max77686_volsetting(PMIC_BUS, PMIC_BUCK4, CONFIG_VDD_G3D_MV, + error |= max77686_volsetting(PMIC_BUS, PMIC_BUCK4, VDD_G3D_MV, REG_ENABLE, MAX77686_MV); - error |= max77686_volsetting(PMIC_BUS, PMIC_LDO2, CONFIG_VDD_LDO2_MV, + error |= max77686_volsetting(PMIC_BUS, PMIC_LDO2, VDD_LDO2_MV, REG_ENABLE, MAX77686_MV); - error |= max77686_volsetting(PMIC_BUS, PMIC_LDO3, CONFIG_VDD_LDO3_MV, + error |= max77686_volsetting(PMIC_BUS, PMIC_LDO3, VDD_LDO3_MV, REG_ENABLE, MAX77686_MV); - error |= max77686_volsetting(PMIC_BUS, PMIC_LDO5, CONFIG_VDD_LDO5_MV, + error |= max77686_volsetting(PMIC_BUS, PMIC_LDO5, VDD_LDO5_MV, REG_ENABLE, MAX77686_MV); - error |= max77686_volsetting(PMIC_BUS, PMIC_LDO10, CONFIG_VDD_LDO10_MV, + error |= max77686_volsetting(PMIC_BUS, PMIC_LDO10, VDD_LDO10_MV, REG_ENABLE, MAX77686_MV); error |= max77686_enable_32khz_cp(PMIC_BUS); @@ -92,7 +93,7 @@ static void snow_setup_power(void) } } -static void snow_setup_storage(void) +static void setup_storage(void) { /* MMC0: Fixed, 8 bit mode, connected with GPIO. */ if (clock_set_mshci(PERIPH_ID_SDMMC0)) @@ -109,12 +110,12 @@ static void snow_setup_storage(void) exynos_pinmux_config(PERIPH_ID_SDMMC2, 0); } -static void snow_setup_graphics(void) +static void setup_graphics(void) { exynos_pinmux_config(PERIPH_ID_DPHPD, 0); } -static void snow_setup_gpio(void) +static void setup_gpio(void) { struct exynos5_gpio_part1 *gpio_pt1; struct exynos5_gpio_part2 *gpio_pt2; @@ -142,7 +143,7 @@ static void snow_setup_gpio(void) s5p_gpio_set_pull(&gpio_pt2->x1, POWER_GPIO, EXYNOS_GPIO_PULL_NONE); } -static void snow_setup_memory(struct mem_timings *mem, int is_resume) +static void setup_memory(struct mem_timings *mem, int is_resume) { printk(BIOS_SPEW, "man: 0x%x type: 0x%x, div: 0x%x, mhz: 0x%x\n", mem->mem_manuf, @@ -162,7 +163,7 @@ static void snow_setup_memory(struct mem_timings *mem, int is_resume) } } -static struct mem_timings *snow_setup_clock(void) +static struct mem_timings *setup_clock(void) { struct mem_timings *mem = get_mem_timings(); struct arm_clk_ratios *arm_ratios = get_arm_clk_ratios(); @@ -177,31 +178,30 @@ void main(void) { struct mem_timings *mem; void *entry; - int is_resume = (snow_get_wakeup_state() != SNOW_IS_NOT_WAKEUP); + int is_resume = (get_wakeup_state() != IS_NOT_WAKEUP); /* Clock must be initialized before console_init, otherwise you may need * to re-initialize serial console drivers again. */ - mem = snow_setup_clock(); + mem = setup_clock(); if (!is_resume) { console_init(); - snow_setup_power(); + setup_power(); } - snow_setup_memory(mem, is_resume); + setup_memory(mem, is_resume); if (is_resume) { - snow_wakeup(); + wakeup(); } - snow_setup_storage(); - snow_setup_gpio(); - snow_setup_graphics(); + setup_storage(); + setup_gpio(); + setup_graphics(); /* Set SPI (primary CBFS media) clock to 50MHz. */ clock_set_rate(PERIPH_ID_SPI1, 50000000); - entry = cbfs_load_stage(CBFS_DEFAULT_MEDIA, "fallback/coreboot_ram"); - printk(BIOS_INFO, "entry is 0x%p, leaving romstage.\n", entry); + entry = cbfs_load_stage(CBFS_DEFAULT_MEDIA, "fallback/coreboot_ram"); stage_exit(entry); } diff --git a/src/mainboard/google/snow/wakeup.c b/src/mainboard/google/snow/wakeup.c index 8bb1724a2d..7a78721d02 100644 --- a/src/mainboard/google/snow/wakeup.c +++ b/src/mainboard/google/snow/wakeup.c @@ -24,39 +24,12 @@ #include #include -#include "mainboard.h" +#include -static int snow_wakeup_need_reset(void) +int wakeup_need_reset(void) { /* The "wake up" event is not reliable (known as "bad wakeup") and needs * reset if GPIO value is high. */ return gpio_get_value(GPIO_Y10); } -void snow_wakeup(void) -{ - if (snow_wakeup_need_reset()) - power_reset(); - - power_init(); /* Ensure ps_hold_setup() for early wakeup. */ - power_exit_wakeup(); - /* Should never return. */ - die("Failed to wake up.\n"); -} - -int snow_get_wakeup_state() -{ - uint32_t status = power_read_reset_status(); - - /* DIDLE/LPA can be resumed without clock reset (ex, bootblock), - * and SLEEP requires resetting clock (should be done in ROM stage). - */ - - if (status == S5P_CHECK_DIDLE || status == S5P_CHECK_LPA) - return SNOW_WAKEUP_DIRECT; - - if (status == S5P_CHECK_SLEEP) - return SNOW_WAKEUP_NEED_CLOCK_RESET; - - return SNOW_IS_NOT_WAKEUP; -} -- cgit v1.2.3