From 0160d76152ecfbcbed599bb697917b423931b92b Mon Sep 17 00:00:00 2001 From: Aaron Durbin Date: Thu, 13 Dec 2012 16:51:41 -0600 Subject: baskingridge: dev, recovery, and WP switch support This commit adds support for the deveveloper, recovery, and write protect querying. It just uses jumpers on the Basking Ridge board. Noted ability to togggle jumpers results in toggling the respective modes. Change-Id: Iac189a1fa0245654591e2e9075380db422a329a0 Signed-off-by: Aaron Durbin Reviewed-on: http://review.coreboot.org/2676 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones --- src/mainboard/intel/baskingridge/chromeos.c | 45 +++++++++++++++++------------ 1 file changed, 26 insertions(+), 19 deletions(-) (limited to 'src') diff --git a/src/mainboard/intel/baskingridge/chromeos.c b/src/mainboard/intel/baskingridge/chromeos.c index 4ee9d6248d..6a1bc26150 100644 --- a/src/mainboard/intel/baskingridge/chromeos.c +++ b/src/mainboard/intel/baskingridge/chromeos.c @@ -27,6 +27,7 @@ #include #endif #include +#include #ifndef __PRE_RAM__ #include @@ -44,30 +45,30 @@ void fill_lb_gpios(struct lb_gpios *gpios) if (!gpio_base) return; - u32 gp_lvl = inl(gpio_base + 0x0c); - u32 gp_lvl2 = inl(gpio_base + 0x38); - /* u32 gp_lvl3 = inl(gpio_base + 0x48); */ + u32 gp_lvl = inl(gpio_base + GP_LVL); + u32 gp_lvl2 = inl(gpio_base + GP_LVL2); + u32 gp_lvl3 = inl(gpio_base + GP_LVL3); gpios->size = sizeof(*gpios) + (GPIO_COUNT * sizeof(struct lb_gpio)); gpios->count = GPIO_COUNT; - /* Write Protect: GPIO48 */ - gpios->gpios[0].port = 48; + /* Write Protect: GPIO22 */ + gpios->gpios[0].port = 0; gpios->gpios[0].polarity = ACTIVE_LOW; - gpios->gpios[0].value = (gp_lvl2 >> (48-32)) & 1; + gpios->gpios[0].value = (gp_lvl >> 22) & 1; strncpy((char *)gpios->gpios[0].name,"write protect", GPIO_MAX_NAME_LENGTH); - /* Recovery: GPIO22 */ - gpios->gpios[1].port = 22; - gpios->gpios[1].polarity = ACTIVE_LOW; - gpios->gpios[1].value = (gp_lvl >> 22) & 1; + /* Recovery: GPIO69 - SV_DETECT - J8E3 (silkscreen: J8E2) */ + gpios->gpios[1].port = 69; + gpios->gpios[1].polarity = ACTIVE_HIGH; + gpios->gpios[1].value = (gp_lvl3 >> (69-64)) & 1; strncpy((char *)gpios->gpios[1].name,"recovery", GPIO_MAX_NAME_LENGTH); - /* Developer: GPIO57 */ - gpios->gpios[2].port = 57; + /* Developer: GPIO48 - BIOS_RESP - J8E4 (silkscreen: J8E3) */ + gpios->gpios[2].port = 48; gpios->gpios[2].polarity = ACTIVE_LOW; - gpios->gpios[2].value = (gp_lvl2 >> (57-32)) & 1; + gpios->gpios[2].value = (gp_lvl2 >> (48-32)) & 1; strncpy((char *)gpios->gpios[2].name,"developer", GPIO_MAX_NAME_LENGTH); /* Hard code the lid switch GPIO to open. */ @@ -99,10 +100,13 @@ int get_developer_mode_switch(void) dev = dev_find_slot(0, PCI_DEVFN(0x1f,0)); #endif u16 gpio_base = pci_read_config32(dev, GPIOBASE) & 0xfffe; - u32 gp_lvl2 = inl(gpio_base + 0x38); + u32 gp_lvl2 = inl(gpio_base + GP_LVL2); - /* Developer: GPIO17, active high */ - return (gp_lvl2 >> (57-32)) & 1; + /* + * Developer: GPIO48, Connected to J8E4, however the silkscreen says + * J8E3. The jumper is active low. + */ + return !((gp_lvl2 >> (48-32)) & 1); } int get_recovery_mode_switch(void) @@ -114,9 +118,12 @@ int get_recovery_mode_switch(void) dev = dev_find_slot(0, PCI_DEVFN(0x1f,0)); #endif u16 gpio_base = pci_read_config32(dev, GPIOBASE) & 0xfffe; - u32 gp_lvl = inl(gpio_base + 0x0c); + u32 gp_lvl3 = inl(gpio_base + GP_LVL3); - /* Recovery: GPIO22, active low */ - return !((gp_lvl >> 22) & 1); + /* + * Recovery: GPIO69, Connected to J8E3, however the silkscreen says + * J8E2. The jump is active high. + */ + return (gp_lvl3 >> (69-64)) & 1; } -- cgit v1.2.3