From 00b490dd59cd7d688808fd9322c7f30e50a887f4 Mon Sep 17 00:00:00 2001 From: Mathew King Date: Fri, 12 Mar 2021 15:48:32 -0700 Subject: mb/google/guybrush: Add initial fch irq routing BUG=b:181972598 TEST=builds Signed-off-by: Mathew King Change-Id: I1abb070324254e21b03bfe00d6eee3b70120564c Reviewed-on: https://review.coreboot.org/c/coreboot/+/51473 Tested-by: build bot (Jenkins) Reviewed-by: Raul Rangel Reviewed-by: Felix Held --- src/mainboard/google/guybrush/mainboard.c | 83 +++++++++++++++++++++++++++++++ 1 file changed, 83 insertions(+) (limited to 'src') diff --git a/src/mainboard/google/guybrush/mainboard.c b/src/mainboard/google/guybrush/mainboard.c index 90ecdda02e..72ad7a8a0f 100644 --- a/src/mainboard/google/guybrush/mainboard.c +++ b/src/mainboard/google/guybrush/mainboard.c @@ -1,10 +1,89 @@ /* SPDX-License-Identifier: GPL-2.0-or-later */ +#include #include #include +#include #include #include +/* + * These arrays set up the FCH PCI_INTR registers 0xC00/0xC01. + * This table is responsible for physically routing the PIC and + * IOAPIC IRQs to the different PCI devices on the system. It + * is read and written via registers 0xC00/0xC01 as an + * Index/Data pair. These values are chipset and mainboard + * dependent and should be updated accordingly. + */ +static uint8_t fch_pic_routing[0x80]; +static uint8_t fch_apic_routing[0x80]; + +_Static_assert(sizeof(fch_pic_routing) == sizeof(fch_apic_routing), + "PIC and APIC FCH interrupt tables must be the same size"); + +/* + * This controls the device -> IRQ routing. + * + * Hardcoded IRQs: + * 0: timer < soc/amd/common/acpi/lpc.asl + * 1: i8042 - Keyboard + * 2: cascade + * 8: rtc0 <- soc/amd/common/acpi/lpc.asl + * 9: acpi <- soc/amd/common/acpi/lpc.asl + */ +static const struct fch_irq_routing { + uint8_t intr_index; + uint8_t pic_irq_num; + uint8_t apic_irq_num; +} guybrush_fch[] = { + { PIRQ_A, PIRQ_NC, PIRQ_NC }, + { PIRQ_B, PIRQ_NC, PIRQ_NC }, + { PIRQ_C, PIRQ_NC, PIRQ_NC }, + { PIRQ_D, PIRQ_NC, PIRQ_NC }, + { PIRQ_E, PIRQ_NC, PIRQ_NC }, + { PIRQ_F, PIRQ_NC, PIRQ_NC }, + { PIRQ_G, PIRQ_NC, PIRQ_NC }, + { PIRQ_H, PIRQ_NC, PIRQ_NC }, + + { PIRQ_SCI, ACPI_SCI_IRQ, ACPI_SCI_IRQ }, + { PIRQ_SD, PIRQ_NC, PIRQ_NC }, + { PIRQ_SDIO, PIRQ_NC, PIRQ_NC }, + { PIRQ_SATA, PIRQ_NC, PIRQ_NC }, + { PIRQ_EMMC, PIRQ_NC, PIRQ_NC }, + { PIRQ_GPIO, PIRQ_NC, PIRQ_NC }, + { PIRQ_I2C2, PIRQ_NC, PIRQ_NC }, + { PIRQ_I2C3, PIRQ_NC, PIRQ_NC }, + { PIRQ_UART0, 4, 4 }, + { PIRQ_UART1, 3, 3 }, + + /* The MISC registers are not interrupt numbers */ + { PIRQ_MISC, 0xfa, 0x00 }, + { PIRQ_MISC0, 0x91, 0x00 }, + { PIRQ_HPET_L, 0x00, 0x00 }, + { PIRQ_HPET_H, 0x00, 0x00 }, +}; + +static void init_tables(void) +{ + const struct fch_irq_routing *entry; + int i; + + memset(fch_pic_routing, PIRQ_NC, sizeof(fch_pic_routing)); + memset(fch_apic_routing, PIRQ_NC, sizeof(fch_apic_routing)); + + for (i = 0; i < ARRAY_SIZE(guybrush_fch); i++) { + entry = guybrush_fch + i; + fch_pic_routing[entry->intr_index] = entry->pic_irq_num; + fch_apic_routing[entry->intr_index] = entry->apic_irq_num; + } +} + +static void pirq_setup(void) +{ + intr_data_ptr = fch_apic_routing; + picr_data_ptr = fch_pic_routing; +} + static void mainboard_configure_gpios(void) { size_t base_num_gpios, override_num_gpios; @@ -28,6 +107,10 @@ static void mainboard_enable(struct device *dev) printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n"); dev->ops->acpi_inject_dsdt = chromeos_dsdt_generator; + + init_tables(); + /* Initialize the PIRQ data structures for consumption */ + pirq_setup(); } struct chip_operations mainboard_ops = { -- cgit v1.2.3