From a8b80942a08177cb6c318f084e6a9c17668753fc Mon Sep 17 00:00:00 2001 From: Ronak Kanabar Date: Wed, 17 Jun 2020 18:25:33 +0530 Subject: vendorcode/intel/fsp: Add Jasper Lake FSP headers for FSP v2194 The FSP-M/S headers added are generated as per FSP v2194. BUG=b:159193895 BRANCH=None TEST=Build and boot JSLRVP Cq-Depend: TBD Change-Id: I0cd84fdb0089bf8ea3f4440e89fdee7f11119751 Signed-off-by: Ronak Kanabar Reviewed-on: https://review.coreboot.org/c/coreboot/+/42471 Reviewed-by: Karthik Ramasubramanian Tested-by: build bot (Jenkins) --- .../intel/fsp/fsp2_0/jasperlake/FspmUpd.h | 2560 ++++++++++++++++++-- .../intel/fsp/fsp2_0/jasperlake/FspsUpd.h | 2470 +++++++++++++++++-- 2 files changed, 4665 insertions(+), 365 deletions(-) (limited to 'src/vendorcode') diff --git a/src/vendorcode/intel/fsp/fsp2_0/jasperlake/FspmUpd.h b/src/vendorcode/intel/fsp/fsp2_0/jasperlake/FspmUpd.h index 7bcd6c09f0..3af6fade3d 100644 --- a/src/vendorcode/intel/fsp/fsp2_0/jasperlake/FspmUpd.h +++ b/src/vendorcode/intel/fsp/fsp2_0/jasperlake/FspmUpd.h @@ -55,9 +55,10 @@ typedef struct { **/ typedef struct { -/** Offset 0x0040 - Reserved +/** Offset 0x0040 - Platform Reserved Memory Size + The minimum platform memory size required to pass control into DXE **/ - UINT8 Reserved0[8]; + UINT64 PlatformMemorySize; /** Offset 0x0048 - SPD Data Length Length of SPD Data @@ -65,9 +66,15 @@ typedef struct { **/ UINT16 MemorySpdDataLen; -/** Offset 0x004A - Reserved +/** Offset 0x004A - Enable above 4GB MMIO resource support + Enable/disable above 4GB MMIO resource support + $EN_DIS +**/ + UINT8 EnableAbove4GBMmio; + +/** Offset 0x004B - Reserved **/ - UINT8 Reserved1[2]; + UINT8 Reserved0; /** Offset 0x004C - Memory SPD Pointer Channel 0 Dimm 0 Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 @@ -132,9 +139,41 @@ typedef struct { **/ UINT8 CaVrefConfig; -/** Offset 0x0096 - Reserved +/** Offset 0x0096 - Smram Mask + The SMM Regions AB-SEG and/or H-SEG reserved + 0: Neither, 1:AB-SEG, 2:H-SEG, 3: Both +**/ + UINT8 SmramMask; + +/** Offset 0x0097 - MRC Fast Boot + Enables/Disable the MRC fast path thru the MRC + $EN_DIS +**/ + UINT8 MrcFastBoot; + +/** Offset 0x0098 - LPDDR4 Write DQ/DQS Retraining + Enables/Disable LPDDR4 Write DQ/DQS Retraining + $EN_DIS +**/ + UINT8 Lp4DqsOscEn; + +/** Offset 0x0099 - Reserved +**/ + UINT8 Reserved1; + +/** Offset 0x009A - Rank Margin Tool per Task + This option enables the user to execute Rank Margin Tool per major training step + in the MRC. + $EN_DIS +**/ + UINT8 RmtPerTask; + +/** Offset 0x009B - Training Trace + This option enables the trained state tracing feature in MRC. This feature will + print out the key training parameters state across major training steps. + $EN_DIS **/ - UINT8 Reserved2[6]; + UINT8 TrainTrace; /** Offset 0x009C - Tseg Size Size of SMRAM memory reserved. 0x400000 for Release build and 0x1000000 for Debug build @@ -142,9 +181,35 @@ typedef struct { **/ UINT32 TsegSize; -/** Offset 0x00A0 - Reserved +/** Offset 0x00A0 - MMIO Size + Size of MMIO space reserved for devices. 0(Default)=Auto, non-Zero=size in MB +**/ + UINT16 MmioSize; + +/** Offset 0x00A2 - LowSupplyEnData + Enable: Enable Low Supply for LPDDR4 Data, Disable(Default) + $EN_DIS +**/ + UINT8 LowSupplyEnData; + +/** Offset 0x00A3 - LowSupplyEnCcc + Enable: Enable Low Supply for LPDDR4 Clock/Command/Control, Disable(Default) + $EN_DIS +**/ + UINT8 LowSupplyEnCcc; + +/** Offset 0x00A4 - Memory Test on Warm Boot + Run Base Memory Test on Warm Boot + 0:Disable, 1:Enable +**/ + UINT8 MemTestOnWarmBoot; + +/** Offset 0x00A5 - Probeless Trace + Probeless Trace: 0=Disabled, 1=Enable. Enabling Probeless Trace will reserve 128MB. + This also requires IED to be enabled. + $EN_DIS **/ - UINT8 Reserved3[6]; + UINT8 ProbelessTrace; /** Offset 0x00A6 - Enable SMBus Enable/disable SMBus controller. @@ -169,9 +234,18 @@ typedef struct { **/ UINT8 PlatformDebugConsent; -/** Offset 0x00AC - Reserved +/** Offset 0x00AC - DCI Enable + Determine if to enable DCI debug from host + $EN_DIS +**/ + UINT8 DciEn; + +/** Offset 0x00AD - DCI DbC Mode + Disabled: Clear both USB2/3DBCEN; USB2: set USB2DBCEN; USB3: set USB3DBCEN; Both: + Set both USB2/3DBCEN; No Change: Comply with HW value + 0:Disabled, 1:USB2 DbC, 2:USB3 DbC, 3:Both, 4:No Change **/ - UINT8 Reserved4[2]; + UINT8 DciDbcMode; /** Offset 0x00AE - Enable DCI ModPHY Pwoer Gate Enable ModPHY Pwoer Gate when DCI is enabled @@ -179,9 +253,12 @@ typedef struct { **/ UINT8 DciModphyPg; -/** Offset 0x00AF - Reserved +/** Offset 0x00AF - USB3 Type-C UFP2DFP Kernel/Platform Debug Support + This BIOS option enables kernel and platform debug for USB3 interface over a UFP + Type-C receptacle, select 'No Change' will do nothing to UFP2DFP setting. + 0:Disabled, 1:Enabled, 2:No Change **/ - UINT8 Reserved5; + UINT8 DciUsb3TypecUfpDbg; /** Offset 0x00B0 - PCH Trace Hub Mode Select 'Host Debugger' if Trace Hub is used with host debugger tool or 'Target Debugger' @@ -190,9 +267,40 @@ typedef struct { **/ UINT8 PchTraceHubMode; -/** Offset 0x00B1 - Reserved +/** Offset 0x00B1 - PCH Trace Hub Memory Region 0 buffer Size + Specify size of Pch trace memory region 0 buffer, the size can be 0, 1MB, 8MB, 64MB, + 128MB, 256MB, 512MB. Note : Limitation of total buffer size (PCH + CPU) is 512MB. + 0:0, 1:1MB, 2:8MB, 3:64MB, 4:128MB, 5:256MB, 6:512MB **/ - UINT8 Reserved6[47]; + UINT8 PchTraceHubMemReg0Size; + +/** Offset 0x00B2 - PCH Trace Hub Memory Region 1 buffer Size + Specify size of Pch trace memory region 1 buffer, the size can be 0, 1MB, 8MB, 64MB, + 128MB, 256MB, 512MB. Note : Limitation of total buffer size (PCH + CPU) is 512MB. + 0:0, 1:1MB, 2:8MB, 3:64MB, 4:128MB, 5:256MB, 6:512MB +**/ + UINT8 PchTraceHubMemReg1Size; + +/** Offset 0x00B3 - Reserved +**/ + UINT8 Reserved2[7]; + +/** Offset 0x00BA - State of X2APIC_OPT_OUT bit in the DMAR table + 0=Disable/Clear, 1=Enable/Set + $EN_DIS +**/ + UINT8 X2ApicOptOut; + +/** Offset 0x00BB - State of DMA_CONTROL_GUARANTEE bit in the DMAR table + 0=Disable/Clear, 1=Enable/Set + $EN_DIS +**/ + UINT8 DmaControlGuarantee; + +/** Offset 0x00BC - Base addresses for VT-d function MMIO access + Base addresses for VT-d MMIO access per VT-d engine +**/ + UINT32 VtdBaseAddress[9]; /** Offset 0x00E0 - Disable VT-d 0=Enable/FALSE(VT-d enabled), 1=Disable/TRUE (VT-d disabled) @@ -202,7 +310,7 @@ typedef struct { /** Offset 0x00E1 - Reserved **/ - UINT8 Reserved7[3]; + UINT8 Reserved3[3]; /** Offset 0x00E4 - Internal Graphics Pre-allocated Memory Size of memory preallocated for internal graphics. @@ -218,9 +326,11 @@ typedef struct { **/ UINT8 InternalGfx; -/** Offset 0x00E6 - Reserved +/** Offset 0x00E6 - Aperture Size + Select the Aperture Size. + 0:128 MB, 1:256 MB, 2:512 MB **/ - UINT8 Reserved8; + UINT8 ApertureSize; /** Offset 0x00E7 - Board Type MrcBoardType, Options are 0=Mobile/Mobile Halo, 1=Desktop/DT Halo, 5=ULT/ULX/Mobile @@ -229,9 +339,12 @@ typedef struct { **/ UINT8 UserBd; -/** Offset 0x00E8 - Reserved +/** Offset 0x00E8 - DDR Frequency Limit + Maximum Memory Frequency Selections in Mhz. Options are 1067, 1333, 1600, 1867, + 2133, 2400, 2667, 2933 and 0 for Auto. + 1067:1067, 1333:1333, 1600:1600, 1867:1867, 2133:2133, 2400:2400, 2667:2667, 2933:2933, 0:Auto **/ - UINT8 Reserved9[2]; + UINT16 DdrFreqLimit; /** Offset 0x00EA - SA GV System Agent dynamic frequency support and when enabled memory will be training @@ -240,9 +353,25 @@ typedef struct { **/ UINT8 SaGv; -/** Offset 0x00EB - Reserved +/** Offset 0x00EB - DDR Speed Control + DDR Frequency and Gear control for all SAGV points. + 0:Auto, 1:Manual +**/ + UINT8 DdrSpeedControl; + +/** Offset 0x00EC - Low Frequency + SAGV Low Frequency Selections in Mhz. Options are 1067, 1333, 1600, 1867, 2133, + 2400, 2667, 2933 and 0 for Auto. + 1067:1067, 1333:1333, 1600:1600, 1867:1867, 2133:2133, 2400:2400, 2667:2667, 2933:2933, 0:Auto +**/ + UINT16 FreqSaGvLow; + +/** Offset 0x00EE - Mid Frequency + SAGV Mid Frequency Selections in Mhz. Options are 1067, 1333, 1600, 1867, 2133, + 2400, 2667, 2933 and 0 for Auto. + 1067:1067, 1333:1333, 1600:1600, 1867:1867, 2133:2133, 2400:2400, 2667:2667, 2933:2933, 0:Auto **/ - UINT8 Reserved10[5]; + UINT16 FreqSaGvMid; /** Offset 0x00F0 - Rank Margin Tool Enable/disable Rank Margin Tool. @@ -250,9 +379,61 @@ typedef struct { **/ UINT8 RMT; -/** Offset 0x00F1 - Reserved +/** Offset 0x00F1 - Channel A DIMM Control + Channel A DIMM Control Support - Enable or Disable Dimms on Channel A. + 0:Enable both DIMMs, 1:Disable DIMM0, 2:Disable DIMM1, 3:Disable both DIMMs +**/ + UINT8 DisableDimmChannel0; + +/** Offset 0x00F2 - Channel B DIMM Control + Channel B DIMM Control Support - Enable or Disable Dimms on Channel B. + 0:Enable both DIMMs, 1:Disable DIMM0, 2:Disable DIMM1, 3:Disable both DIMMs +**/ + UINT8 DisableDimmChannel1; + +/** Offset 0x00F3 - Scrambler Support + This option enables data scrambling in memory. + $EN_DIS +**/ + UINT8 ScramblerSupport; + +/** Offset 0x00F4 - Ddr4OneDpc + DDR4 1DPC performance feature for 2R DIMMs. Can be enabled on DIMM0 or DIMM1 only, + or on both (default) + 0: Disabled, 1: Enabled on DIMM0 only, 2: Enabled on DIMM1 only, 3: Enabled +**/ + UINT8 Ddr4OneDpc; + +/** Offset 0x00F5 - Reserved +**/ + UINT8 Reserved4[3]; + +/** Offset 0x00F8 - MMA Test Content Pointer + Pointer to MMA Test Content in Memory +**/ + UINT32 MmaTestContentPtr; + +/** Offset 0x00FC - MMA Test Content Size + Size of MMA Test Content in Memory +**/ + UINT32 MmaTestContentSize; + +/** Offset 0x0100 - MMA Test Config Pointer + Pointer to MMA Test Config in Memory +**/ + UINT32 MmaTestConfigPtr; + +/** Offset 0x0104 - MMA Test Config Size + Size of MMA Test Config in Memory +**/ + UINT32 MmaTestConfigSize; + +/** Offset 0x0108 - SPD Profile Selected + Select DIMM timing profile. Options are 0=Default Profile, 1=Custom Profile, 2=XMP + Profile 1, 3=XMP Profile 2 + 0:Default Profile, 1:Custom Profile, 2:XMP Profile 1, 3:XMP Profile 2 **/ - UINT8 Reserved11[24]; + UINT8 SpdProfileSelected; /** Offset 0x0109 - Memory Reference Clock 100MHz, 133MHz. @@ -260,335 +441,2274 @@ typedef struct { **/ UINT8 RefClk; -/** Offset 0x010A - Reserved +/** Offset 0x010A - Memory Voltage + DRAM voltage (Vdd) (supply voltage for input buffers and core logic of the DRAM + chips) in millivolts. 0=Platform Default (no override), 1200=1.2V, 1350=1.35V etc. + 0:Default, 1200:1.20 Volts, 1250:1.25 Volts, 1300:1.30 Volts, 1350:1.35 Volts, 1400:1.40 + Volts, 1450:1.45 Volts, 1500:1.50 Volts, 1550:1.55 Volts, 1600:1.60 Volts, 1650:1.65 Volts **/ - UINT8 Reserved12[26]; + UINT16 VddVoltage; -/** Offset 0x0124 - Enable Intel HD Audio (Azalia) - 0: Disable, 1: Enable (Default) Azalia controller +/** Offset 0x010C - Memory Ratio + Automatic or the frequency will equal ratio times reference clock. Set to Auto to + recalculate memory timings listed below. + 0:Auto, 4:4, 5:5, 6:6, 7:7, 8:8, 9:9, 10:10, 11:11, 12:12, 13:13, 14:14, 15:15 +**/ + UINT8 Ratio; + +/** Offset 0x010D - QCLK Odd Ratio + Adds 133 or 100 MHz to QCLK frequency, depending on RefClk $EN_DIS **/ - UINT8 PchHdaEnable; + UINT8 OddRatioMode; -/** Offset 0x0125 - CPU Trace Hub Mode - Select 'Host Debugger' if Trace Hub is used with host debugger tool or 'Target Debugger' - if Trace Hub is used by target debugger software or 'Disable' trace hub functionality. - 0: Disable, 1:Target Debugger Mode, 2:Host Debugger Mode +/** Offset 0x010E - tCL + CAS Latency, 0: AUTO, max: 31. Only used if FspmUpd->FspmConfig.SpdProfileSelected + == 1 (Custom Profile). **/ - UINT8 CpuTraceHubMode; + UINT8 tCL; -/** Offset 0x0126 - Reserved +/** Offset 0x010F - tCWL + Min CAS Write Latency Delay Time, 0: AUTO, max: 34. Only used if FspmUpd->FspmConfig.SpdProfileSelected + == 1 (Custom Profile). **/ - UINT8 Reserved13[98]; + UINT8 tCWL; -/** Offset 0x0188 - Program GPIOs for LFP on DDI port-A device - 0=Disabled,1(Default)=eDP, 2=MIPI DSI - 0:Disabled, 1:eDP, 2:MIPI DSI +/** Offset 0x0110 - tFAW + Min Four Activate Window Delay Time, 0: AUTO, max: 63. Only used if FspmUpd->FspmConfig.SpdProfileSelected + == 1 (Custom Profile). **/ - UINT8 DdiPortAConfig; + UINT16 tFAW; -/** Offset 0x0189 - Reserved +/** Offset 0x0112 - tRAS + RAS Active Time, 0: AUTO, max: 64. Only used if FspmUpd->FspmConfig.SpdProfileSelected + == 1 (Custom Profile). **/ - UINT8 Reserved14[2]; + UINT16 tRAS; -/** Offset 0x018B - Enable or disable HPD of DDI port B - 0=Disable, 1(Default)=Enable - $EN_DIS +/** Offset 0x0114 - tRCD/tRP + RAS to CAS delay time and Row Precharge delay time, 0: AUTO, max: 63. Only used + if FspmUpd->FspmConfig.SpdProfileSelected == 1 (Custom Profile). **/ - UINT8 DdiPortBHpd; + UINT8 tRCDtRP; -/** Offset 0x018C - Enable or disable HPD of DDI port C - 0(Default)=Disable, 1=Enable - $EN_DIS +/** Offset 0x0115 - SA GV Low Gear + Gear Selection for SAGV Low point + 0:Gear1, 1:Gear2 **/ - UINT8 DdiPortCHpd; + UINT8 SaGvLowGear2; -/** Offset 0x018D - Reserved +/** Offset 0x0116 - tREFI + Refresh Interval, 0: AUTO, max: 65535. Only used if FspmUpd->FspmConfig.SpdProfileSelected + == 1 (Custom Profile). **/ - UINT8 Reserved15[5]; + UINT16 tREFI; -/** Offset 0x0192 - Enable or disable DDC of DDI port B - 0=Disable, 1(Default)=Enable - $EN_DIS +/** Offset 0x0118 - tRFC + Min Refresh Recovery Delay Time, 0: AUTO, max: 1023. Only used if FspmUpd->FspmConfig.SpdProfileSelected + == 1 (Custom Profile). **/ - UINT8 DdiPortBDdc; + UINT16 tRFC; -/** Offset 0x0193 - Enable or disable DDC of DDI port C - 0(Default)=Disable, 1=Enable - $EN_DIS +/** Offset 0x011A - tRRD + Min Row Active to Row Active Delay Time, 0: AUTO, max: 15. Only used if FspmUpd->FspmConfig.SpdProfileSelected + == 1 (Custom Profile). **/ - UINT8 DdiPortCDdc; + UINT8 tRRD; -/** Offset 0x0194 - Reserved +/** Offset 0x011B - tRTP + Min Internal Read to Precharge Command Delay Time, 0: AUTO, max: 15. DDR4 legal + values: 5, 6, 7, 8, 9, 10, 12. Only used if FspmUpd->FspmConfig.SpdProfileSelected + == 1 (Custom Profile). **/ - UINT8 Reserved16[176]; + UINT8 tRTP; -/** Offset 0x0244 - CPU ratio value - CPU ratio value. Valid Range 0 to 63 +/** Offset 0x011C - tWR + Min Write Recovery Time, 0: AUTO, legal values: 5, 6, 7, 8, 10, 12, 14, 16, 18, + 20, 24, 30, 34, 40. Only used if FspmUpd->FspmConfig.SpdProfileSelected == 1 (Custom Profile). + 0:Auto, 5:5, 6:6, 7:7, 8:8, 10:10, 12:12, 14:14, 16:16, 18:18, 20:20, 24:24, 30:30, + 34:34, 40:40 **/ - UINT8 CpuRatio; + UINT8 tWR; -/** Offset 0x0245 - Reserved +/** Offset 0x011D - tWTR + Min Internal Write to Read Command Delay Time, 0: AUTO, max: 28. Only used if FspmUpd->FspmConfig.SpdProfileSelected + == 1 (Custom Profile). **/ - UINT8 Reserved17[4]; + UINT8 tWTR; -/** Offset 0x0249 - Enable or Disable VMX - Enable or Disable VMX; 0: Disable; 1: Enable. - $EN_DIS +/** Offset 0x011E - NMode + System command rate, range 0-2, 0 means auto, 1 = 1N, 2 = 2N **/ - UINT8 VmxEnable; + UINT8 NModeSupport; -/** Offset 0x024A - Reserved +/** Offset 0x011F - DllBwEn[0] + DllBwEn[0], for 1067 (0..7) **/ - UINT8 Reserved18[32]; + UINT8 DllBwEn0; -/** Offset 0x026A - BiosGuard - Enable/Disable. 0: Disable, Enable/Disable BIOS Guard feature, 1: enable - $EN_DIS +/** Offset 0x0120 - DllBwEn[1] + DllBwEn[1], for 1333 (0..7) **/ - UINT8 BiosGuard; + UINT8 DllBwEn1; -/** Offset 0x026B - Reserved +/** Offset 0x0121 - DllBwEn[2] + DllBwEn[2], for 1600 (0..7) **/ - UINT8 Reserved19[5]; + UINT8 DllBwEn2; -/** Offset 0x0270 - PrmrrSize - Enable/Disable. 0: Disable, define default value of PrmrrSize , 1: enable +/** Offset 0x0122 - DllBwEn[3] + DllBwEn[3], for 1867 and up (0..7) **/ - UINT32 PrmrrSize; + UINT8 DllBwEn3; -/** Offset 0x0274 - SinitMemorySize - Enable/Disable. 0: Disable, define default value of SinitMemorySize , 1: enable +/** Offset 0x0123 - ISVT IO Port Address + ISVT IO Port Address. 0=Minimal, 0xFF=Maximum, 0x99=Default **/ - UINT32 SinitMemorySize; + UINT8 IsvtIoPort; -/** Offset 0x0278 - Reserved +/** Offset 0x0124 - Enable Intel HD Audio (Azalia) + 0: Disable, 1: Enable (Default) Azalia controller + $EN_DIS **/ - UINT8 Reserved20[543]; + UINT8 PchHdaEnable; -/** Offset 0x0497 - Usage type for ClkSrc - 0-23: PCH rootport, 0x40-0x43: PEG port, 0x70:LAN, 0x80: unspecified but in use - (free running), 0xFF: not used +/** Offset 0x0125 - CPU Trace Hub Mode + Select 'Host Debugger' if Trace Hub is used with host debugger tool or 'Target Debugger' + if Trace Hub is used by target debugger software or 'Disable' trace hub functionality. + 0: Disable, 1:Target Debugger Mode, 2:Host Debugger Mode **/ - UINT8 PcieClkSrcUsage[16]; + UINT8 CpuTraceHubMode; -/** Offset 0x04A7 - ClkReq-to-ClkSrc mapping - Number of ClkReq signal assigned to ClkSrc +/** Offset 0x0126 - CPU Trace Hub Memory Region 0 + CPU Trace Hub Memory Region 0, The avaliable memory size is : 0MB, 1MB, 8MB, 64MB, + 128MB, 256MB, 512MB. Note : Limitation of total buffer size (CPU + PCH) is 512MB. + 0:0, 1:1MB, 2:8MB, 3:64MB, 4:128MB, 5:256MB, 6:512MB **/ - UINT8 PcieClkSrcClkReq[16]; + UINT8 CpuTraceHubMemReg0Size; -/** Offset 0x04B7 - Reserved +/** Offset 0x0127 - CPU Trace Hub Memory Region 1 + CPU Trace Hub Memory Region 1. The avaliable memory size is : 0MB, 1MB, 8MB, 64MB, + 128MB, 256MB, 512MB. Note : Limitation of total buffer size (CPU + PCH) is 512MB. + 0:0, 1:1MB, 2:8MB, 3:64MB, 4:128MB, 5:256MB, 6:512MB **/ - UINT8 Reserved21[5]; + UINT8 CpuTraceHubMemReg1Size; -/** Offset 0x04BC - Enable PCIE RP Mask - Enable/disable PCIE Root Ports. 0: disable, 1: enable. One bit for each port, bit0 - for port1, bit1 for port2, and so on. +/** Offset 0x0128 - SA GV Mid Gear + Gear Selection for SAGV Mid point + 0:Gear1, 1:Gear2 **/ - UINT32 PcieRpEnableMask; + UINT8 SaGvMidGear2; -/** Offset 0x04C0 - Debug Interfaces - Debug Interfaces. BIT0-RAM, BIT1-UART, BIT3-USB3, BIT4-Serial IO, BIT5-TraceHub, - BIT2 - Not used. +/** Offset 0x0129 - SA GV High Gear + Gear Selection for SAGV High point, or when SAGV is disabled + 0:Gear1, 1:Gear2 **/ - UINT8 PcdDebugInterfaceFlags; + UINT8 SaGvHighGear2; -/** Offset 0x04C1 - Serial Io Uart Debug Controller Number - Select SerialIo Uart Controller for debug. Note: If UART0 is selected as CNVi BT - Core interface, it cannot be used for debug purpose. - 0:SerialIoUart0, 1:SerialIoUart1, 2:SerialIoUart2 +/** Offset 0x012A - HECI Timeouts + 0: Disable, 1: Enable (Default) timeout check for HECI + $EN_DIS **/ - UINT8 SerialIoUartDebugControllerNumber; + UINT8 HeciTimeouts; -/** Offset 0x04C2 - Reserved +/** Offset 0x012B - Reserved **/ - UINT8 Reserved22[22]; + UINT8 Reserved5; -/** Offset 0x04D8 - Early Command Training - Enables/Disable Early Command Training - $EN_DIS +/** Offset 0x012C - HECI1 BAR address + BAR address of HECI1 **/ - UINT8 ECT; + UINT32 Heci1BarAddress; -/** Offset 0x04D9 - Reserved +/** Offset 0x0130 - HECI2 BAR address + BAR address of HECI2 **/ - UINT8 Reserved23[2]; + UINT32 Heci2BarAddress; -/** Offset 0x04DB - Read MPR Training - Enables/Disable Read MPR Training - $EN_DIS +/** Offset 0x0134 - HECI3 BAR address + BAR address of HECI3 **/ - UINT8 RDMPRT; + UINT32 Heci3BarAddress; -/** Offset 0x04DC - Reserved +/** Offset 0x0138 - HG dGPU Power Delay + HG dGPU delay interval after power enabling: 0=Minimal, 1000=Maximum, default is + 300=300 microseconds **/ - UINT8 Reserved24[7]; + UINT16 HgDelayAfterPwrEn; -/** Offset 0x04E3 - Dimm ODT Training - Enables/Disable Dimm ODT Training - $EN_DIS +/** Offset 0x013A - HG dGPU Reset Delay + HG dGPU delay interval for Reset complete: 0=Minimal, 1000=Maximum, default is 100=100 + microseconds **/ - UINT8 DIMMODTT; + UINT16 HgDelayAfterHoldReset; -/** Offset 0x04E4 - DIMM RON Training - Enables/Disable DIMM RON Training - $EN_DIS +/** Offset 0x013C - MMIO size adjustment for AUTO mode + Positive number means increasing MMIO size, Negative value means decreasing MMIO + size: 0 (Default)=no change to AUTO mode MMIO size **/ - UINT8 DIMMRONT; + UINT16 MmioSizeAdjustment; -/** Offset 0x04E5 - Reserved +/** Offset 0x013E - PCIe ASPM programming will happen in relation to the Oprom + Select when PCIe ASPM programming will happen in relation to the Oprom. Before(0x0)(Default): + Do PCIe ASPM programming before Oprom, After(0x1): Do PCIe ASPM programming after + Oprom, requires an SMI handler to save/restore ASPM settings during S3 resume + 0:Before, 1:After **/ - UINT8 Reserved25; + UINT8 InitPcieAspmAfterOprom; -/** Offset 0x04E6 - Write Slew Rate Training - Enables/Disable Write Slew Rate Training - $EN_DIS +/** Offset 0x013F - Selection of the primary display device + 0=iGFX, 1=PEG, 2=PCIe Graphics on PCH, 3(Default)=AUTO, 4=Hybrid Graphics + 0:iGFX, 1:PEG, 2:PCIe Graphics on PCH, 3:AUTO, 4:Hybrid Graphics **/ - UINT8 WRSRT; + UINT8 PrimaryDisplay; -/** Offset 0x04E7 - Read ODT Training - Enables/Disable Read ODT Training - $EN_DIS +/** Offset 0x0140 - Selection of PSMI Region size + 0=32MB, 1=288MB, 2=544MB, 3=800MB, 4=1024MB Default is 0 + 0:32MB, 1:288MB, 2:544MB, 3:800MB, 4:1024MB **/ - UINT8 RDODTT; + UINT8 PsmiRegionSize; -/** Offset 0x04E8 - Read Equalization Training - Enables/Disable Read Equalization Training - $EN_DIS +/** Offset 0x0141 - Reserved **/ - UINT8 RDEQT; + UINT8 Reserved6[3]; -/** Offset 0x04E9 - Read Amplifier Training - Enables/Disable Read Amplifier Training - $EN_DIS +/** Offset 0x0144 - Temporary MMIO address for GMADR + Obsolete field now and it has been extended to 64 bit address, used GmAdr64 **/ - UINT8 RDAPT; + UINT32 GmAdr; -/** Offset 0x04EA - Reserved +/** Offset 0x0148 - Temporary MMIO address for GTTMMADR + The reference code will use this as Temporary MMIO address space to access GTTMMADR + Registers.Platform should provide conflict free Temporary MMIO Range: GttMmAdr + to (GttMmAdr + 2MB MMIO + 6MB Reserved + GttSize). Default is (GmAdr - (2MB MMIO + + 6MB Reserved + GttSize)) to (GmAdr - 0x1) (Where GttSize = 8MB) **/ - UINT8 Reserved26[3]; + UINT32 GttMmAdr; -/** Offset 0x04ED - Read Voltage Centering 2D - Enables/Disable Read Voltage Centering 2D - $EN_DIS +/** Offset 0x014C - Selection of iGFX GTT Memory size + 1=2MB, 2=4MB, 3=8MB, Default is 3 + 1:2MB, 2:4MB, 3:8MB **/ - UINT8 RDVC2D; + UINT16 GttSize; -/** Offset 0x04EE - Reserved +/** Offset 0x014E - Reserved **/ - UINT8 Reserved27[3]; + UINT8 Reserved7[24]; -/** Offset 0x04F1 - Turn Around Timing Training - Enables/Disable Turn Around Timing Training +/** Offset 0x0166 - Enable/Disable MRC TXT dependency + When enabled MRC execution will wait for TXT initialization to be done first. Disabled(0x0)(Default): + MRC will not wait for TXT initialization, Enabled(0x1): MRC will wait for TXT initialization $EN_DIS **/ - UINT8 TAT; + UINT8 TxtImplemented; -/** Offset 0x04F2 - Reserved +/** Offset 0x0167 - Enable/Disable SA OcSupport + Enable: Enable SA OcSupport, Disable(Default): Disable SA OcSupport + $EN_DIS **/ - UINT8 Reserved28[6]; + UINT8 SaOcSupport; -/** Offset 0x04F8 - Receive Enable Centering 1D - Enables/Disable Receive Enable Centering 1D - $EN_DIS +/** Offset 0x0168 - GT slice Voltage Mode + 0(Default): Adaptive, 1: Override + 0: Adaptive, 1: Override **/ - UINT8 RCVENC1D; + UINT8 GtVoltageMode; -/** Offset 0x04F9 - Retrain Margin Check - Enables/Disable Retrain Margin Check - $EN_DIS +/** Offset 0x0169 - Maximum GTs turbo ratio override + 0(Default)=Minimal/Auto, 60=Maximum **/ - UINT8 RMC; + UINT8 GtMaxOcRatio; -/** Offset 0x04FA - Reserved +/** Offset 0x016A - The voltage offset applied to GT slice + 0(Default)=Minimal, 1000=Maximum **/ - UINT8 Reserved29[60]; + UINT16 GtVoltageOffset; -/** Offset 0x0536 - RAPL PL 1 WindowX - Power PL 1 time window X value, (1/1024)*(1+(x/4))*(2^y) (0=Def) +/** Offset 0x016C - The GT slice voltage override which is applied to the entire range of GT frequencies + 0(Default)=Minimal, 2000=Maximum **/ - UINT8 RaplLim1WindX; + UINT16 GtVoltageOverride; -/** Offset 0x0537 - RAPL PL 1 WindowY - Power PL 1 time window Y value, (1/1024)*(1+(x/4))*(2^y) (0=Def) +/** Offset 0x016E - adaptive voltage applied during turbo frequencies + 0(Default)=Minimal, 2000=Maximum **/ - UINT8 RaplLim1WindY; + UINT16 GtExtraTurboVoltage; -/** Offset 0x0538 - Reserved +/** Offset 0x0170 - voltage offset applied to the SA + 0(Default)=Minimal, 1000=Maximum **/ - UINT8 Reserved30[2]; + UINT16 SaVoltageOffset; -/** Offset 0x053A - RAPL PL 1 Power - range[0;2^14-1]= [2047.875;0]in W, (224= Def) +/** Offset 0x0172 - PCIe root port Function number for Hybrid Graphics dGPU + Root port Index number to indicate which PCIe root port has dGPU **/ - UINT16 RaplLim1Pwr; + UINT8 RootPortIndex; -/** Offset 0x053C - Reserved +/** Offset 0x0173 - Realtime Memory Timing + 0(Default): Disabled, 1: Enabled. When enabled, it will allow the system to perform + realtime memory timing changes after MRC_DONE. + 0: Disabled, 1: Enabled **/ - UINT8 Reserved31[68]; + UINT8 RealtimeMemoryTiming; -/** Offset 0x0580 - LpDdrDqDqsReTraining - Enables/Disable LpDdrDqDqsReTraining +/** Offset 0x0174 - Enable/Disable SA IPU + Enable(Default): Enable SA IPU, Disable: Disable SA IPU $EN_DIS **/ - UINT8 LpDdrDqDqsReTraining; + UINT8 SaIpuEnable; -/** Offset 0x0581 - Reserved +/** Offset 0x0175 - IPU IMR Configuration + 0:IPU Camera, 1:IPU Gen Default is 0 + 0:IPU Camera, 1:IPU Gen **/ - UINT8 Reserved32[172]; + UINT8 SaIpuImrConfiguration; -/** Offset 0x062D - Enable HD Audio Link - Enable/disable HD Audio Link. Muxed with SSP0/SSP1/SNDW1. +/** Offset 0x0176 - IMGU CLKOUT Configuration + The configuration of IMGU CLKOUT, 0: Disable;1: Enable. $EN_DIS **/ - UINT8 PchHdaAudioLinkHdaEnable; + UINT8 ImguClkOutEn[6]; -/** Offset 0x062E - Reserved +/** Offset 0x017C - Reserved **/ - UINT8 Reserved33[3]; + UINT8 Reserved8[10]; -/** Offset 0x0631 - Enable HD Audio DMIC_N Link - Enable/disable HD Audio DMIC1 link. Muxed with SNDW3. +/** Offset 0x0186 - Selection of PSMI Support On/Off + 0(Default) = FALSE, 1 = TRUE. When TRUE, it will allow the PSMI Support + $EN_DIS **/ - UINT8 PchHdaAudioLinkDmicEnable[2]; + UINT8 GtPsmiSupport; -/** Offset 0x0633 - Reserved +/** Offset 0x0187 - Reserved **/ - UINT8 Reserved34[17]; + UINT8 Reserved9; -/** Offset 0x0644 - Enable HD Audio DSP - Enable/disable HD Audio DSP feature. +/** Offset 0x0188 - Program GPIOs for LFP on DDI port-A device + 0=Disabled,1(Default)=eDP, 2=MIPI DSI + 0:Disabled, 1:eDP, 2:MIPI DSI +**/ + UINT8 DdiPortAConfig; + +/** Offset 0x0189 - Reserved +**/ + UINT8 Reserved10[2]; + +/** Offset 0x018B - Enable or disable HPD of DDI port B + 0=Disable, 1(Default)=Enable $EN_DIS **/ - UINT8 PchHdaDspEnable; + UINT8 DdiPortBHpd; -/** Offset 0x0645 - Reserved +/** Offset 0x018C - Enable or disable HPD of DDI port C + 0(Default)=Disable, 1=Enable + $EN_DIS **/ - UINT8 Reserved35[11]; + UINT8 DdiPortCHpd; -/** Offset 0x0650 - Enable HD Audio SSP0 Link - Enable/disable HD Audio SSP_N/I2S link. Muxed with HDA. N-number 0-5 +/** Offset 0x018D - Enable or disable HPD of DDI port 1 + 0=Disable, 1(Default)=Enable + $EN_DIS **/ - UINT8 PchHdaAudioLinkSspEnable[6]; + UINT8 DdiPort1Hpd; -/** Offset 0x0656 - Enable HD Audio SoundWire#N Link - Enable/disable HD Audio SNDW#N link. Muxed with HDA. +/** Offset 0x018E - Enable or disable HPD of DDI port 2 + 0(Default)=Disable, 1=Enable + $EN_DIS **/ - UINT8 PchHdaAudioLinkSndwEnable[4]; + UINT8 DdiPort2Hpd; -/** Offset 0x065A - Reserved +/** Offset 0x018F - Enable or disable HPD of DDI port 3 + 0(Default)=Disable, 1=Enable + $EN_DIS **/ - UINT8 Reserved36[7]; + UINT8 DdiPort3Hpd; -/** Offset 0x0661 - Skip MBP HOB - Test, 0: disable, 1: enable, Enable/Disable MOB HOB. +/** Offset 0x0190 - Enable or disable HPD of DDI port 4 + 0(Default)=Disable, 1=Enable $EN_DIS **/ - UINT8 SkipMbpHob; + UINT8 DdiPort4Hpd; + +/** Offset 0x0191 - Reserved +**/ + UINT8 Reserved11; + +/** Offset 0x0192 - Enable or disable DDC of DDI port B + 0=Disable, 1(Default)=Enable + $EN_DIS +**/ + UINT8 DdiPortBDdc; + +/** Offset 0x0193 - Enable or disable DDC of DDI port C + 0(Default)=Disable, 1=Enable + $EN_DIS +**/ + UINT8 DdiPortCDdc; + +/** Offset 0x0194 - Enable DDC setting of DDI Port 1 + 0(Default)=Disable, 1=Enable + $EN_DIS +**/ + UINT8 DdiPort1Ddc; + +/** Offset 0x0195 - Enable DDC setting of DDI Port 2 + 0(Default)=Disable, 1=Enable + $EN_DIS +**/ + UINT8 DdiPort2Ddc; + +/** Offset 0x0196 - Enable DDC setting of DDI Port 3 + 0(Default)=Disable, 1=Enable + $EN_DIS +**/ + UINT8 DdiPort3Ddc; + +/** Offset 0x0197 - Enable DDC setting of DDI Port 4 + 0(Default)=Disable, 1=Enable + $EN_DIS +**/ + UINT8 DdiPort4Ddc; + +/** Offset 0x0198 - Reserved +**/ + UINT8 Reserved12[130]; + +/** Offset 0x021A - DMI Max Link Speed + Auto (Default)(0x0): Maximum possible link speed, Gen1(0x1): Limit Link to Gen1 + Speed, Gen2(0x2): Limit Link to Gen2 Speed, Gen3(0x3):Limit Link to Gen3 Speed + 0:Auto, 1:Gen1, 2:Gen2, 3:Gen3 +**/ + UINT8 DmiMaxLinkSpeed; + +/** Offset 0x021B - DMI Equalization Phase 2 + DMI Equalization Phase 2. (0x0): Disable phase 2, (0x1): Enable phase 2, (0x2)(Default): + AUTO - Use the current default method + 0:Disable phase2, 1:Enable phase2, 2:Auto +**/ + UINT8 DmiGen3EqPh2Enable; + +/** Offset 0x021C - DMI Gen3 Equalization Phase3 + DMI Gen3 Equalization Phase3. Auto(0x0)(Default): Use the current default method, + HwEq(0x1): Use Adaptive Hardware Equalization, SwEq(0x2): Use Adaptive Software + Equalization (Implemented in BIOS Reference Code), Static(0x3): Use the Static + EQs provided in DmiGen3EndPointPreset array for Phase1 AND Phase3 (Instead of just + Phase1), Disabled(0x4): Bypass Equalization Phase 3 + 0:Auto, 1:HwEq, 2:SwEq, 3:StaticEq, 4:BypassPhase3 +**/ + UINT8 DmiGen3EqPh3Method; + +/** Offset 0x021D - Enable/Disable DMI GEN3 Static EQ Phase1 programming + Program DMI Gen3 EQ Phase1 Static Presets. Disabled(0x0): Disable EQ Phase1 Static + Presets Programming, Enabled(0x1)(Default): Enable EQ Phase1 Static Presets Programming + $EN_DIS +**/ + UINT8 DmiGen3ProgramStaticEq; + +/** Offset 0x021E - DeEmphasis control for DMI + DeEmphasis control for DMI. 0=-6dB, 1(Default)=-3.5 dB + 0: -6dB, 1: -3.5dB +**/ + UINT8 DmiDeEmphasis; + +/** Offset 0x021F - DMI Gen3 Root port preset values per lane + Used for programming DMI Gen3 preset values per lane. Range: 0-9, 8 is default for each lane +**/ + UINT8 DmiGen3RootPortPreset[8]; + +/** Offset 0x0227 - DMI Gen3 End port preset values per lane + Used for programming DMI Gen3 preset values per lane. Range: 0-9, 7 is default for each lane +**/ + UINT8 DmiGen3EndPointPreset[8]; + +/** Offset 0x022F - DMI Gen3 End port Hint values per lane + Used for programming DMI Gen3 Hint values per lane. Range: 0-6, 2 is default for each lane +**/ + UINT8 DmiGen3EndPointHint[8]; + +/** Offset 0x0237 - DMI Gen3 RxCTLEp per-Bundle control + Range: 0-15, 0 is default for each bundle, must be specified based upon platform design +**/ + UINT8 DmiGen3RxCtlePeaking[4]; + +/** Offset 0x023B - BIST on Reset + Enable or Disable BIST on Reset; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 BistOnReset; + +/** Offset 0x023C - Skip Stop PBET Timer Enable/Disable + Skip Stop PBET Timer; 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 SkipStopPbet; + +/** Offset 0x023D - Over clocking support + Over clocking support; 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 OcSupport; + +/** Offset 0x023E - Over clocking Lock + Over clocking Lock Enable/Disable; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 OcLock; + +/** Offset 0x023F - Maximum Core Turbo Ratio Override + Maximum core turbo ratio override allows to increase CPU core frequency beyond the + fused max turbo ratio limit. 0: Hardware defaults. Range: 0-85 +**/ + UINT8 CoreMaxOcRatio; + +/** Offset 0x0240 - Core voltage mode + Core voltage mode; 0: Adaptive; 1: Override. + $EN_DIS +**/ + UINT8 CoreVoltageMode; + +/** Offset 0x0241 - Maximum clr turbo ratio override + Maximum clr turbo ratio override allows to increase CPU clr frequency beyond the + fused max turbo ratio limit. 0: Hardware defaults. Range: 0-85 +**/ + UINT8 RingMaxOcRatio; + +/** Offset 0x0242 - Hyper Threading Enable/Disable + Enable or Disable Hyper Threading; 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 HyperThreading; + +/** Offset 0x0243 - Enable or Disable CPU Ratio Override + Enable or Disable CPU Ratio Override; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 CpuRatioOverride; + +/** Offset 0x0244 - CPU ratio value + CPU ratio value. Valid Range 0 to 63 +**/ + UINT8 CpuRatio; + +/** Offset 0x0245 - Boot frequency + Sets the boot frequency starting from reset vector.- 0: Maximum battery performance. + 1: Maximum non-turbo performance. 2: Turbo performance + 0:0, 1:1, 2:2 +**/ + UINT8 BootFrequency; + +/** Offset 0x0246 - Number of active cores + Number of active cores(Depends on Number of cores). 0: All;1: 1 ;2: + 2 ;3: 3 + 0:All, 1:1, 2:2, 3:3 +**/ + UINT8 ActiveCoreCount; + +/** Offset 0x0247 - Processor Early Power On Configuration FCLK setting + 0: 800 MHz (ULT/ULX). 1: 1 GHz (DT/Halo). Not supported on ULT/ULX.- + 2: 400 MHz. - 3: Reserved + 0:800 MHz, 1: 1 GHz, 2: 400 MHz, 3: Reserved +**/ + UINT8 FClkFrequency; + +/** Offset 0x0248 - Set JTAG power in C10 and deeper power states + False: JTAG is power gated in C10 state. True: keeps the JTAG power up during C10 + and deeper power states for debug purpose. 0: False; 1: True. + 0: False, 1: True +**/ + UINT8 JtagC10PowerGateDisable; + +/** Offset 0x0249 - Enable or Disable VMX + Enable or Disable VMX; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 VmxEnable; + +/** Offset 0x024A - AVX2 Ratio Offset + 0(Default)= No Offset. Range 0 - 31. Specifies number of bins to decrease AVX ratio + vs. Core Ratio. Uses Mailbox MSR 0x150, cmd 0x1B. +**/ + UINT8 Avx2RatioOffset; + +/** Offset 0x024B - AVX3 Ratio Offset + 0(Default)= No Offset. Range 0 - 31. Specifies number of bins to decrease AVX ratio + vs. Core Ratio. Uses Mailbox MSR 0x150, cmd 0x1B. +**/ + UINT8 Avx3RatioOffset; + +/** Offset 0x024C - BCLK Adaptive Voltage Enable + When enabled, the CPU V/F curves are aware of BCLK frequency when calculated. 0: + Disable; 1: Enable + $EN_DIS +**/ + UINT8 BclkAdaptiveVoltage; + +/** Offset 0x024D - Reserved +**/ + UINT8 Reserved13; + +/** Offset 0x024E - core voltage override + The core voltage override which is applied to the entire range of cpu core frequencies. + Valid Range 0 to 2000 +**/ + UINT16 CoreVoltageOverride; + +/** Offset 0x0250 - Core Turbo voltage Adaptive + Extra Turbo voltage applied to the cpu core when the cpu is operating in turbo mode. + Valid Range 0 to 2000 +**/ + UINT16 CoreVoltageAdaptive; + +/** Offset 0x0252 - Core Turbo voltage Offset + The voltage offset applied to the core while operating in turbo mode.Valid Range 0 to 1000 +**/ + UINT16 CoreVoltageOffset; + +/** Offset 0x0254 - Core PLL voltage offset + Core PLL voltage offset. 0: No offset. Range 0-63 +**/ + UINT8 CorePllVoltageOffset; + +/** Offset 0x0255 - Ring Downbin + Ring Downbin enable/disable. When enabled, CPU will ensure the ring ratio is always + lower than the core ratio.0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 RingDownBin; + +/** Offset 0x0256 - Ring voltage mode + Ring voltage mode; 0: Adaptive; 1: Override. + $EN_DIS +**/ + UINT8 RingVoltageMode; + +/** Offset 0x0257 - TjMax Offset + TjMax offset.Specified value here is clipped by pCode (125 - TjMax Offset) to support + TjMax in the range of 62 to 115 deg Celsius. Valid Range 10 - 63 +**/ + UINT8 TjMaxOffset; + +/** Offset 0x0258 - Ring voltage override + The ring voltage override which is applied to the entire range of cpu ring frequencies. + Valid Range 0 to 2000 +**/ + UINT16 RingVoltageOverride; + +/** Offset 0x025A - Ring Turbo voltage Adaptive + Extra Turbo voltage applied to the cpu ring when the cpu is operating in turbo mode. + Valid Range 0 to 2000 +**/ + UINT16 RingVoltageAdaptive; + +/** Offset 0x025C - Ring Turbo voltage Offset + The voltage offset applied to the ring while operating in turbo mode. Valid Range 0 to 1000 +**/ + UINT16 RingVoltageOffset; + +/** Offset 0x025E - Enable CPU CrashLog + Enable or Disable CPU CrashLog; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 CpuCrashLogEnable; + +/** Offset 0x025F - Reserved +**/ + UINT8 Reserved14[9]; + +/** Offset 0x0268 - CPU Run Control + Enable, Disable or Do not configure CPU Run Control; 0: Disable; 1: Enable ; 2: + No Change + 0:Disabled, 1:Enabled, 2:No Change +**/ + UINT8 DebugInterfaceEnable; + +/** Offset 0x0269 - CPU Run Control Lock + Lock or Unlock CPU Run Control; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 DebugInterfaceLockEnable; + +/** Offset 0x026A - BiosGuard + Enable/Disable. 0: Disable, Enable/Disable BIOS Guard feature, 1: enable + $EN_DIS +**/ + UINT8 BiosGuard; + +/** Offset 0x026B +**/ + UINT8 BiosGuardToolsInterface; + +/** Offset 0x026C - Txt + Enable/Disable. 0: Disable, Enable/Disable Txt feature, 1: enable + $EN_DIS +**/ + UINT8 Txt; + +/** Offset 0x026D - Reserved +**/ + UINT8 Reserved15[3]; + +/** Offset 0x0270 - PrmrrSize + Enable/Disable. 0: Disable, define default value of PrmrrSize , 1: enable +**/ + UINT32 PrmrrSize; + +/** Offset 0x0274 - SinitMemorySize + Enable/Disable. 0: Disable, define default value of SinitMemorySize , 1: enable +**/ + UINT32 SinitMemorySize; + +/** Offset 0x0278 - TxtDprMemoryBase + Enable/Disable. 0: Disable, define default value of TxtDprMemoryBase , 1: enable +**/ + UINT64 TxtDprMemoryBase; + +/** Offset 0x0280 - TxtHeapMemorySize + Enable/Disable. 0: Disable, define default value of TxtHeapMemorySize , 1: enable +**/ + UINT32 TxtHeapMemorySize; + +/** Offset 0x0284 - TxtDprMemorySize + Enable/Disable. 0: Disable, define default value of TxtDprMemorySize , 1: enable +**/ + UINT32 TxtDprMemorySize; + +/** Offset 0x0288 - BiosAcmBase + Enable/Disable. 0: Disable, define default value of BiosAcmBase , 1: enable +**/ + UINT32 BiosAcmBase; + +/** Offset 0x028C - BiosAcmSize + Enable/Disable. 0: Disable, define default value of BiosAcmSize , 1: enable +**/ + UINT32 BiosAcmSize; + +/** Offset 0x0290 - ApStartupBase + Enable/Disable. 0: Disable, define default value of BiosAcmBase , 1: enable +**/ + UINT32 ApStartupBase; + +/** Offset 0x0294 - TgaSize + Enable/Disable. 0: Disable, define default value of TgaSize , 1: enable +**/ + UINT32 TgaSize; + +/** Offset 0x0298 - TxtLcpPdBase + Enable/Disable. 0: Disable, define default value of TxtLcpPdBase , 1: enable +**/ + UINT64 TxtLcpPdBase; + +/** Offset 0x02A0 - TxtLcpPdSize + Enable/Disable. 0: Disable, define default value of TxtLcpPdSize , 1: enable +**/ + UINT64 TxtLcpPdSize; + +/** Offset 0x02A8 - IsTPMPresence + IsTPMPresence default values +**/ + UINT8 IsTPMPresence; + +/** Offset 0x02A9 - Reserved +**/ + UINT8 Reserved16[6]; + +/** Offset 0x02AF - Enable PCH HSIO PCIE Rx Set Ctle + Enable PCH PCIe Gen 3 Set CTLE Value. +**/ + UINT8 PchPcieHsioRxSetCtleEnable[24]; + +/** Offset 0x02C7 - PCH HSIO PCIE Rx Set Ctle Value + PCH PCIe Gen 3 Set CTLE Value. +**/ + UINT8 PchPcieHsioRxSetCtle[24]; + +/** Offset 0x02DF - Enble PCH HSIO PCIE TX Gen 1 Downscale Amplitude Adjustment value override + 0: Disable; 1: Enable. +**/ + UINT8 PchPcieHsioTxGen1DownscaleAmpEnable[24]; + +/** Offset 0x02F7 - PCH HSIO PCIE Gen 2 TX Output Downscale Amplitude Adjustment value + PCH PCIe Gen 2 TX Output Downscale Amplitude Adjustment value. +**/ + UINT8 PchPcieHsioTxGen1DownscaleAmp[24]; + +/** Offset 0x030F - Enable PCH HSIO PCIE TX Gen 2 Downscale Amplitude Adjustment value override + 0: Disable; 1: Enable. +**/ + UINT8 PchPcieHsioTxGen2DownscaleAmpEnable[24]; + +/** Offset 0x0327 - PCH HSIO PCIE Gen 2 TX Output Downscale Amplitude Adjustment value + PCH PCIe Gen 2 TX Output Downscale Amplitude Adjustment value. +**/ + UINT8 PchPcieHsioTxGen2DownscaleAmp[24]; + +/** Offset 0x033F - Enable PCH HSIO PCIE TX Gen 3 Downscale Amplitude Adjustment value override + 0: Disable; 1: Enable. +**/ + UINT8 PchPcieHsioTxGen3DownscaleAmpEnable[24]; + +/** Offset 0x0357 - PCH HSIO PCIE Gen 3 TX Output Downscale Amplitude Adjustment value + PCH PCIe Gen 3 TX Output Downscale Amplitude Adjustment value. +**/ + UINT8 PchPcieHsioTxGen3DownscaleAmp[24]; + +/** Offset 0x036F - Enable PCH HSIO PCIE Gen 1 TX Output De-Emphasis Adjustment Setting value override + 0: Disable; 1: Enable. +**/ + UINT8 PchPcieHsioTxGen1DeEmphEnable[24]; + +/** Offset 0x0387 - PCH HSIO PCIE Gen 1 TX Output De-Emphasis Adjustment value + PCH PCIe Gen 1 TX Output De-Emphasis Adjustment Setting. +**/ + UINT8 PchPcieHsioTxGen1DeEmph[24]; + +/** Offset 0x039F - Enable PCH HSIO PCIE Gen 2 TX Output -3.5dB De-Emphasis Adjustment Setting value override + 0: Disable; 1: Enable. +**/ + UINT8 PchPcieHsioTxGen2DeEmph3p5Enable[24]; + +/** Offset 0x03B7 - PCH HSIO PCIE Gen 2 TX Output -3.5dB De-Emphasis Adjustment value + PCH PCIe Gen 2 TX Output -3.5dB De-Emphasis Adjustment Setting. +**/ + UINT8 PchPcieHsioTxGen2DeEmph3p5[24]; + +/** Offset 0x03CF - Enable PCH HSIO PCIE Gen 2 TX Output -6.0dB De-Emphasis Adjustment Setting value override + 0: Disable; 1: Enable. +**/ + UINT8 PchPcieHsioTxGen2DeEmph6p0Enable[24]; + +/** Offset 0x03E7 - PCH HSIO PCIE Gen 2 TX Output -6.0dB De-Emphasis Adjustment value + PCH PCIe Gen 2 TX Output -6.0dB De-Emphasis Adjustment Setting. +**/ + UINT8 PchPcieHsioTxGen2DeEmph6p0[24]; + +/** Offset 0x03FF - Enable PCH HSIO SATA Receiver Equalization Boost Magnitude Adjustment Value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioRxGen1EqBoostMagEnable[8]; + +/** Offset 0x0407 - PCH HSIO SATA 1.5 Gb/s Receiver Equalization Boost Magnitude Adjustment value + PCH HSIO SATA 1.5 Gb/s Receiver Equalization Boost Magnitude Adjustment value. +**/ + UINT8 PchSataHsioRxGen1EqBoostMag[8]; + +/** Offset 0x040F - Enable PCH HSIO SATA Receiver Equalization Boost Magnitude Adjustment Value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioRxGen2EqBoostMagEnable[8]; + +/** Offset 0x0417 - PCH HSIO SATA 3.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value + PCH HSIO SATA 3.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value. +**/ + UINT8 PchSataHsioRxGen2EqBoostMag[8]; + +/** Offset 0x041F - Enable PCH HSIO SATA Receiver Equalization Boost Magnitude Adjustment Value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioRxGen3EqBoostMagEnable[8]; + +/** Offset 0x0427 - PCH HSIO SATA 6.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value + PCH HSIO SATA 6.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value. +**/ + UINT8 PchSataHsioRxGen3EqBoostMag[8]; + +/** Offset 0x042F - Enable PCH HSIO SATA 1.5 Gb/s TX Output Downscale Amplitude Adjustment value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioTxGen1DownscaleAmpEnable[8]; + +/** Offset 0x0437 - PCH HSIO SATA 1.5 Gb/s TX Output Downscale Amplitude Adjustment value + PCH HSIO SATA 1.5 Gb/s TX Output Downscale Amplitude Adjustment value. +**/ + UINT8 PchSataHsioTxGen1DownscaleAmp[8]; + +/** Offset 0x043F - Enable PCH HSIO SATA 3.0 Gb/s TX Output Downscale Amplitude Adjustment value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioTxGen2DownscaleAmpEnable[8]; + +/** Offset 0x0447 - PCH HSIO SATA 3.0 Gb/s TX Output Downscale Amplitude Adjustment value + PCH HSIO SATA 3.0 Gb/s TX Output Downscale Amplitude Adjustment value. +**/ + UINT8 PchSataHsioTxGen2DownscaleAmp[8]; + +/** Offset 0x044F - Enable PCH HSIO SATA 6.0 Gb/s TX Output Downscale Amplitude Adjustment value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioTxGen3DownscaleAmpEnable[8]; + +/** Offset 0x0457 - PCH HSIO SATA 6.0 Gb/s TX Output Downscale Amplitude Adjustment value + PCH HSIO SATA 6.0 Gb/s TX Output Downscale Amplitude Adjustment value. +**/ + UINT8 PchSataHsioTxGen3DownscaleAmp[8]; + +/** Offset 0x045F - Enable PCH HSIO SATA 1.5 Gb/s TX Output De-Emphasis Adjustment Setting value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioTxGen1DeEmphEnable[8]; + +/** Offset 0x0467 - PCH HSIO SATA 1.5 Gb/s TX Output De-Emphasis Adjustment Setting + PCH HSIO SATA 1.5 Gb/s TX Output De-Emphasis Adjustment Setting. +**/ + UINT8 PchSataHsioTxGen1DeEmph[8]; + +/** Offset 0x046F - Enable PCH HSIO SATA 3.0 Gb/s TX Output De-Emphasis Adjustment Setting value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioTxGen2DeEmphEnable[8]; + +/** Offset 0x0477 - PCH HSIO SATA 3.0 Gb/s TX Output De-Emphasis Adjustment Setting + PCH HSIO SATA 3.0 Gb/s TX Output De-Emphasis Adjustment Setting. +**/ + UINT8 PchSataHsioTxGen2DeEmph[8]; + +/** Offset 0x047F - Enable PCH HSIO SATA 6.0 Gb/s TX Output De-Emphasis Adjustment Setting value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioTxGen3DeEmphEnable[8]; + +/** Offset 0x0487 - PCH HSIO SATA 6.0 Gb/s TX Output De-Emphasis Adjustment Setting + PCH HSIO SATA 6.0 Gb/s TX Output De-Emphasis Adjustment Setting. +**/ + UINT8 PchSataHsioTxGen3DeEmph[8]; + +/** Offset 0x048F - PCH LPC Enhance the port 8xh decoding + Original LPC only decodes one byte of port 80h. + $EN_DIS +**/ + UINT8 PchLpcEnhancePort8xhDecoding; + +/** Offset 0x0490 - PCH Port80 Route + Control where the Port 80h cycles are sent, 0: LPC; 1: PCI. + $EN_DIS +**/ + UINT8 PchPort80Route; + +/** Offset 0x0491 - Enable SMBus ARP support + Enable SMBus ARP support. + $EN_DIS +**/ + UINT8 SmbusArpEnable; + +/** Offset 0x0492 - Reserved +**/ + UINT8 Reserved17[2]; + +/** Offset 0x0494 - SMBUS Base Address + SMBUS Base Address (IO space). +**/ + UINT16 PchSmbusIoBase; + +/** Offset 0x0496 - Enable SMBus Alert Pin + Enable SMBus Alert Pin. + $EN_DIS +**/ + UINT8 PchSmbAlertEnable; + +/** Offset 0x0497 - Usage type for ClkSrc + 0-23: PCH rootport, 0x40-0x43: PEG port, 0x70:LAN, 0x80: unspecified but in use + (free running), 0xFF: not used +**/ + UINT8 PcieClkSrcUsage[16]; + +/** Offset 0x04A7 - ClkReq-to-ClkSrc mapping + Number of ClkReq signal assigned to ClkSrc +**/ + UINT8 PcieClkSrcClkReq[16]; + +/** Offset 0x04B7 - Reserved +**/ + UINT8 Reserved18[5]; + +/** Offset 0x04BC - Enable PCIE RP Mask + Enable/disable PCIE Root Ports. 0: disable, 1: enable. One bit for each port, bit0 + for port1, bit1 for port2, and so on. +**/ + UINT32 PcieRpEnableMask; + +/** Offset 0x04C0 - Debug Interfaces + Debug Interfaces. BIT0-RAM, BIT1-UART, BIT3-USB3, BIT4-Serial IO, BIT5-TraceHub, + BIT2 - Not used. +**/ + UINT8 PcdDebugInterfaceFlags; + +/** Offset 0x04C1 - Serial Io Uart Debug Controller Number + Select SerialIo Uart Controller for debug. Note: If UART0 is selected as CNVi BT + Core interface, it cannot be used for debug purpose. + 0:SerialIoUart0, 1:SerialIoUart1, 2:SerialIoUart2 +**/ + UINT8 SerialIoUartDebugControllerNumber; + +/** Offset 0x04C2 - Serial Io Uart Debug Auto Flow + Enables UART hardware flow control, CTS and RTS lines. + $EN_DIS +**/ + UINT8 SerialIoUartDebugAutoFlow; + +/** Offset 0x04C3 - Reserved +**/ + UINT8 Reserved19; + +/** Offset 0x04C4 - Serial Io Uart Debug BaudRate + Set default BaudRate Supported from 0 - default to 6000000. Recommended values 9600, + 19200, 57600, 115200, 460800, 921600, 1500000, 1843200, 3000000, 3686400, 6000000 +**/ + UINT32 SerialIoUartDebugBaudRate; + +/** Offset 0x04C8 - Serial Io Uart Debug Parity + Set default Parity. + 0: DefaultParity, 1: NoParity, 2: EvenParity, 3: OddParity +**/ + UINT8 SerialIoUartDebugParity; + +/** Offset 0x04C9 - Serial Io Uart Debug Stop Bits + Set default stop bits. + 0: DefaultStopBits, 1: OneStopBit, 2: OneFiveStopBits, 3: TwoStopBits +**/ + UINT8 SerialIoUartDebugStopBits; + +/** Offset 0x04CA - Serial Io Uart Debug Data Bits + Set default word length. 0: Default, 5,6,7,8 + 5:5BITS, 6:6BITS, 7:7BITS, 8:8BITS +**/ + UINT8 SerialIoUartDebugDataBits; + +/** Offset 0x04CB - Reserved +**/ + UINT8 Reserved20[5]; + +/** Offset 0x04D0 - ISA Serial Base selection + Select ISA Serial Base address. Default is 0x3F8. + 0:0x3F8, 1:0x2F8 +**/ + UINT8 PcdIsaSerialUartBase; + +/** Offset 0x04D1 - GT PLL voltage offset + Core PLL voltage offset. 0: No offset. Range 0-63 +**/ + UINT8 GtPllVoltageOffset; + +/** Offset 0x04D2 - Ring PLL voltage offset + Core PLL voltage offset. 0: No offset. Range 0-63 +**/ + UINT8 RingPllVoltageOffset; + +/** Offset 0x04D3 - System Agent PLL voltage offset + Core PLL voltage offset. 0: No offset. Range 0-63 +**/ + UINT8 SaPllVoltageOffset; + +/** Offset 0x04D4 - Memory Controller PLL voltage offset + Core PLL voltage offset. 0: No offset. Range 0-63 +**/ + UINT8 McPllVoltageOffset; + +/** Offset 0x04D5 - MRC Safe Config + Enables/Disable MRC Safe Config + $EN_DIS +**/ + UINT8 MrcSafeConfig; + +/** Offset 0x04D6 - PcdSerialDebugBaudRate + Baud Rate for Serial Debug Messages. 3:9600, 4:19200, 6:56700, 7:115200. + 3:9600, 4:19200, 6:56700, 7:115200 +**/ + UINT8 PcdSerialDebugBaudRate; + +/** Offset 0x04D7 - HobBufferSize + Size to set HOB Buffer. 0:Default, 1: 1 Byte, 2: 1 KB, 3: Max value(assuming 63KB + total HOB size). + 0:Default, 1: 1 Byte, 2: 1 KB, 3: Max value +**/ + UINT8 HobBufferSize; + +/** Offset 0x04D8 - Early Command Training + Enables/Disable Early Command Training + $EN_DIS +**/ + UINT8 ECT; + +/** Offset 0x04D9 - SenseAmp Offset Training + Enables/Disable SenseAmp Offset Training + $EN_DIS +**/ + UINT8 SOT; + +/** Offset 0x04DA - Early ReadMPR Timing Centering 2D + Enables/Disable Early ReadMPR Timing Centering 2D + $EN_DIS +**/ + UINT8 ERDMPRTC2D; + +/** Offset 0x04DB - Read MPR Training + Enables/Disable Read MPR Training + $EN_DIS +**/ + UINT8 RDMPRT; + +/** Offset 0x04DC - Receive Enable Training + Enables/Disable Receive Enable Training + $EN_DIS +**/ + UINT8 RCVET; + +/** Offset 0x04DD - Jedec Write Leveling + Enables/Disable Jedec Write Leveling + $EN_DIS +**/ + UINT8 JWRL; + +/** Offset 0x04DE - Early Write Time Centering 2D + Enables/Disable Early Write Time Centering 2D + $EN_DIS +**/ + UINT8 EWRTC2D; + +/** Offset 0x04DF - Early Read Time Centering 2D + Enables/Disable Early Read Time Centering 2D + $EN_DIS +**/ + UINT8 ERDTC2D; + +/** Offset 0x04E0 - Write Timing Centering 1D + Enables/Disable Write Timing Centering 1D + $EN_DIS +**/ + UINT8 WRTC1D; + +/** Offset 0x04E1 - Write Voltage Centering 1D + Enables/Disable Write Voltage Centering 1D + $EN_DIS +**/ + UINT8 WRVC1D; + +/** Offset 0x04E2 - Read Timing Centering 1D + Enables/Disable Read Timing Centering 1D + $EN_DIS +**/ + UINT8 RDTC1D; + +/** Offset 0x04E3 - Dimm ODT Training + Enables/Disable Dimm ODT Training + $EN_DIS +**/ + UINT8 DIMMODTT; + +/** Offset 0x04E4 - DIMM RON Training + Enables/Disable DIMM RON Training + $EN_DIS +**/ + UINT8 DIMMRONT; + +/** Offset 0x04E5 - Write Drive Strength/Equalization 2D + Enables/Disable Write Drive Strength/Equalization 2D + $EN_DIS +**/ + UINT8 WRDSEQT; + +/** Offset 0x04E6 - Write Slew Rate Training + Enables/Disable Write Slew Rate Training + $EN_DIS +**/ + UINT8 WRSRT; + +/** Offset 0x04E7 - Read ODT Training + Enables/Disable Read ODT Training + $EN_DIS +**/ + UINT8 RDODTT; + +/** Offset 0x04E8 - Read Equalization Training + Enables/Disable Read Equalization Training + $EN_DIS +**/ + UINT8 RDEQT; + +/** Offset 0x04E9 - Read Amplifier Training + Enables/Disable Read Amplifier Training + $EN_DIS +**/ + UINT8 RDAPT; + +/** Offset 0x04EA - Write Timing Centering 2D + Enables/Disable Write Timing Centering 2D + $EN_DIS +**/ + UINT8 WRTC2D; + +/** Offset 0x04EB - Read Timing Centering 2D + Enables/Disable Read Timing Centering 2D + $EN_DIS +**/ + UINT8 RDTC2D; + +/** Offset 0x04EC - Write Voltage Centering 2D + Enables/Disable Write Voltage Centering 2D + $EN_DIS +**/ + UINT8 WRVC2D; + +/** Offset 0x04ED - Read Voltage Centering 2D + Enables/Disable Read Voltage Centering 2D + $EN_DIS +**/ + UINT8 RDVC2D; + +/** Offset 0x04EE - Command Voltage Centering + Enables/Disable Command Voltage Centering + $EN_DIS +**/ + UINT8 CMDVC; + +/** Offset 0x04EF - Late Command Training + Enables/Disable Late Command Training + $EN_DIS +**/ + UINT8 LCT; + +/** Offset 0x04F0 - Round Trip Latency Training + Enables/Disable Round Trip Latency Training + $EN_DIS +**/ + UINT8 RTL; + +/** Offset 0x04F1 - Turn Around Timing Training + Enables/Disable Turn Around Timing Training + $EN_DIS +**/ + UINT8 TAT; + +/** Offset 0x04F2 - Margin Limit Check + Margin Limit Check. Choose level of margin check + 0:Disable, 1:L1, 2:L2, 3:Both +**/ + UINT8 MarginLimitCheck; + +/** Offset 0x04F3 - Reserved +**/ + UINT8 Reserved21; + +/** Offset 0x04F4 - Margin Limit L2 + % of L1 check for margin limit check +**/ + UINT16 MarginLimitL2; + +/** Offset 0x04F6 - Memory Test + Enables/Disable Memory Test + $EN_DIS +**/ + UINT8 MEMTST; + +/** Offset 0x04F7 - DIMM SPD Alias Test + Enables/Disable DIMM SPD Alias Test + $EN_DIS +**/ + UINT8 ALIASCHK; + +/** Offset 0x04F8 - Receive Enable Centering 1D + Enables/Disable Receive Enable Centering 1D + $EN_DIS +**/ + UINT8 RCVENC1D; + +/** Offset 0x04F9 - Retrain Margin Check + Enables/Disable Retrain Margin Check + $EN_DIS +**/ + UINT8 RMC; + +/** Offset 0x04FA - Write Drive Strength Up/Dn independently + Enables/Disable Write Drive Strength Up/Dn independently + $EN_DIS +**/ + UINT8 WRDSUDT; + +/** Offset 0x04FB - Read Voltage Centering + Enables/Disable Read Voltage Centering + $EN_DIS +**/ + UINT8 RDVC1D; + +/** Offset 0x04FC - Write TCO Comp Training + Enables/Disable Write TCO Comp Training + $EN_DIS +**/ + UINT8 TXTCO; + +/** Offset 0x04FD - Clock TCO Comp Training + Enables/Disable Clock TCO Comp Training + $EN_DIS +**/ + UINT8 CLKTCO; + +/** Offset 0x04FE - Dimm ODT CA Training + Enables/Disable Dimm ODT CA Training + $EN_DIS +**/ + UINT8 DIMMODTCA; + +/** Offset 0x04FF - Write TCO Dqs Training + Enables/Disable Write TCO Dqs Training + $EN_DIS +**/ + UINT8 TXTCODQS; + +/** Offset 0x0500 - Duty Cycle Correction + Enables/Disable Duty Cycle Correction + $EN_DIS +**/ + UINT8 DCC; + +/** Offset 0x0501 - DQ DFE Training + Enable/Disable DQ DFE Training + $EN_DIS +**/ + UINT8 DQDFE; + +/** Offset 0x0502 - Sense Amplifier Correction Training + Enable/Disable Sense Amplifier Correction Training + $EN_DIS +**/ + UINT8 SOTC; + +/** Offset 0x0503 - ECC Support + Enables/Disable ECC Support + $EN_DIS +**/ + UINT8 EccSupport; + +/** Offset 0x0504 - Memory Remap + Enables/Disable Memory Remap + $EN_DIS +**/ + UINT8 RemapEnable; + +/** Offset 0x0505 - MRC Time Measure + Enable/Disable MRC Time Measure + $EN_DIS +**/ + UINT8 MrcTimeMeasure; + +/** Offset 0x0506 - MRC Force Training on Warm + Enables/Disable the MRC training on warm boot + $EN_DIS +**/ + UINT8 MrcTrainOnWarm; + +/** Offset 0x0507 - Rank Interleave support + Enables/Disable Rank Interleave support. NOTE: RI and HORI can not be enabled at + the same time. + $EN_DIS +**/ + UINT8 RankInterleave; + +/** Offset 0x0508 - Enhanced Interleave support + Enables/Disable Enhanced Interleave support + $EN_DIS +**/ + UINT8 EnhancedInterleave; + +/** Offset 0x0509 - Memory Trace + Enable Memory Trace of Ch 0 to Ch 1 using Stacked Mode. Both channels must be of + equal size. This option may change TOLUD and REMAP values as needed. + $EN_DIS +**/ + UINT8 MemoryTrace; + +/** Offset 0x050A - Ch Hash Support + Enable/Disable Channel Hash Support. NOTE: ONLY if Memory interleaved Mode + $EN_DIS +**/ + UINT8 ChHashEnable; + +/** Offset 0x050B - Extern Therm Status + Enables/Disable Extern Therm Status + $EN_DIS +**/ + UINT8 EnableExtts; + +/** Offset 0x050C - Closed Loop Therm Manage + Enables/Disable Closed Loop Therm Manage + $EN_DIS +**/ + UINT8 EnableCltm; + +/** Offset 0x050D - Open Loop Therm Manage + Enables/Disable Open Loop Therm Manage + $EN_DIS +**/ + UINT8 EnableOltm; + +/** Offset 0x050E - DDR PowerDown and idle counter + Enables/Disable DDR PowerDown and idle counter + $EN_DIS +**/ + UINT8 EnablePwrDn; + +/** Offset 0x050F - DDR PowerDown and idle counter - LPDDR + Enables/Disable DDR PowerDown and idle counter(For LPDDR Only) + $EN_DIS +**/ + UINT8 EnablePwrDnLpddr; + +/** Offset 0x0510 - Use user provided power weights, scale factor, and channel power floor values + Enables/Disable Use user provided power weights, scale factor, and channel power + floor values + $EN_DIS +**/ + UINT8 UserPowerWeightsEn; + +/** Offset 0x0511 - RAPL PL Lock + Enables/Disable RAPL PL Lock + $EN_DIS +**/ + UINT8 RaplLim2Lock; + +/** Offset 0x0512 - RAPL PL 2 enable + Enables/Disable RAPL PL 2 enable + $EN_DIS +**/ + UINT8 RaplLim2Ena; + +/** Offset 0x0513 - RAPL PL 1 enable + Enables/Disable RAPL PL 1 enable + $EN_DIS +**/ + UINT8 RaplLim1Ena; + +/** Offset 0x0514 - SelfRefresh Enable + Enables/Disable SelfRefresh Enable + $EN_DIS +**/ + UINT8 SrefCfgEna; + +/** Offset 0x0515 - Throttler CKEMin Defeature - LPDDR + Enables/Disable Throttler CKEMin Defeature(For LPDDR Only) + $EN_DIS +**/ + UINT8 ThrtCkeMinDefeatLpddr; + +/** Offset 0x0516 - Throttler CKEMin Defeature + Enables/Disable Throttler CKEMin Defeature + $EN_DIS +**/ + UINT8 ThrtCkeMinDefeat; + +/** Offset 0x0517 - Enable RH Prevention + Enables/Disable RH Prevention + $EN_DIS +**/ + UINT8 RhPrevention; + +/** Offset 0x0518 - Exit On Failure (MRC) + Enables/Disable Exit On Failure (MRC) + $EN_DIS +**/ + UINT8 ExitOnFailure; + +/** Offset 0x0519 - LPDDR Thermal Sensor + Enables/Disable LPDDR Thermal Sensor + $EN_DIS +**/ + UINT8 DdrThermalSensor; + +/** Offset 0x051A - EV Loader + Enable/Disable EV Loader Functionality + $EN_DIS +**/ + UINT8 EvLoader; + +/** Offset 0x051B - Reserved +**/ + UINT8 Reserved22; + +/** Offset 0x051C - Select if CLK0 is shared between Rank0 and Rank1 in DDR4 DDP + Select if CLK0 is shared between Rank0 and Rank1 in DDR4 DDP + $EN_DIS +**/ + UINT8 Ddr4DdpSharedClock; + +/** Offset 0x051D - Select if ZQ pin is shared between Rank0 and Rank1 in DDR4 DDP + ESelect if ZQ pin is shared between Rank0 and Rank1 in DDR4 DDP + $EN_DIS +**/ + UINT8 Ddr4DdpSharedZq; + +/** Offset 0x051E - Ch Hash Interleaved Bit + Select the BIT to be used for Channel Interleaved mode. NOTE: BIT7 will interlave + the channels at a 2 cacheline granularity, BIT8 at 4 and BIT9 at 8. Default is BIT8 + 0:BIT6, 1:BIT7, 2:BIT8, 3:BIT9, 4:BIT10, 5:BIT11, 6:BIT12, 7:BIT13 +**/ + UINT8 ChHashInterleaveBit; + +/** Offset 0x051F - Reserved +**/ + UINT8 Reserved23; + +/** Offset 0x0520 - Ch Hash Mask + Set the BIT(s) to be included in the XOR function. NOTE BIT mask corresponds to + BITS [19:6] Default is 0x30CC +**/ + UINT16 ChHashMask; + +/** Offset 0x0522 - Reserved +**/ + UINT8 Reserved24[2]; + +/** Offset 0x0524 - Base reference clock value + Base reference clock value, in Hertz(Default is 125Hz) + 100000000:100Hz, 125000000:125Hz, 167000000:167Hz, 250000000:250Hz +**/ + UINT32 BClkFrequency; + +/** Offset 0x0528 - Extended Bank Hashing + Eanble/Disable ExtendedBankHashing + $EN_DIS +**/ + UINT8 ExtendedBankHashing; + +/** Offset 0x0529 - Energy Scale Factor + Energy Scale Factor, Default is 4 +**/ + UINT8 EnergyScaleFact; + +/** Offset 0x052A - CMD Slew Rate Training + Enable/Disable CMD Slew Rate Training + $EN_DIS +**/ + UINT8 CMDSR; + +/** Offset 0x052B - Reserved +**/ + UINT8 Reserved25; + +/** Offset 0x052C - EPG DIMM Idd3N + Active standby current (Idd3N) in milliamps from datasheet. Must be calculated on + a per DIMM basis. Default is 26 +**/ + UINT16 Idd3n; + +/** Offset 0x052E - EPG DIMM Idd3P + Active power-down current (Idd3P) in milliamps from datasheet. Must be calculated + on a per DIMM basis. Default is 11 +**/ + UINT16 Idd3p; + +/** Offset 0x0530 - CMD Drive Strength and Tx Equalization + Enable/Disable CMD Drive Strength and Tx Equalization + $EN_DIS +**/ + UINT8 CMDDSEQ; + +/** Offset 0x0531 - CMD Normalization + Enable/Disable CMD Normalization + $EN_DIS +**/ + UINT8 CMDNORM; + +/** Offset 0x0532 - Early DQ Write Drive Strength and Equalization Training + Enable/Disable Early DQ Write Drive Strength and Equalization Training + $EN_DIS +**/ + UINT8 EWRDSEQ; + +/** Offset 0x0533 - RH Activation Probability + RH Activation Probability, Probability value is 1/2^(inputvalue) +**/ + UINT8 RhActProbability; + +/** Offset 0x0534 - RAPL PL 2 WindowX + Power PL 2 time window X value, (1/1024)*(1+(x/4))*(2^y) (0=Def) +**/ + UINT8 RaplLim2WindX; + +/** Offset 0x0535 - RAPL PL 2 WindowY + Power PL 2 time window Y value, (1/1024)*(1+(x/4))*(2^y) (0=Def) +**/ + UINT8 RaplLim2WindY; + +/** Offset 0x0536 - RAPL PL 1 WindowX + Power PL 1 time window X value, (1/1024)*(1+(x/4))*(2^y) (0=Def) +**/ + UINT8 RaplLim1WindX; + +/** Offset 0x0537 - RAPL PL 1 WindowY + Power PL 1 time window Y value, (1/1024)*(1+(x/4))*(2^y) (0=Def) +**/ + UINT8 RaplLim1WindY; + +/** Offset 0x0538 - RAPL PL 2 Power + range[0;2^14-1]= [2047.875;0]in W, (224= Def) +**/ + UINT16 RaplLim2Pwr; + +/** Offset 0x053A - RAPL PL 1 Power + range[0;2^14-1]= [2047.875;0]in W, (224= Def) +**/ + UINT16 RaplLim1Pwr; + +/** Offset 0x053C - Warm Threshold Ch0 Dimm0 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255 +**/ + UINT8 WarmThresholdCh0Dimm0; + +/** Offset 0x053D - Warm Threshold Ch0 Dimm1 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255 +**/ + UINT8 WarmThresholdCh0Dimm1; + +/** Offset 0x053E - Warm Threshold Ch1 Dimm0 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255 +**/ + UINT8 WarmThresholdCh1Dimm0; + +/** Offset 0x053F - Warm Threshold Ch1 Dimm1 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255 +**/ + UINT8 WarmThresholdCh1Dimm1; + +/** Offset 0x0540 - Hot Threshold Ch0 Dimm0 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255 +**/ + UINT8 HotThresholdCh0Dimm0; + +/** Offset 0x0541 - Hot Threshold Ch0 Dimm1 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255 +**/ + UINT8 HotThresholdCh0Dimm1; + +/** Offset 0x0542 - Hot Threshold Ch1 Dimm0 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255 +**/ + UINT8 HotThresholdCh1Dimm0; + +/** Offset 0x0543 - Hot Threshold Ch1 Dimm1 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255 +**/ + UINT8 HotThresholdCh1Dimm1; + +/** Offset 0x0544 - Warm Budget Ch0 Dimm0 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM +**/ + UINT8 WarmBudgetCh0Dimm0; + +/** Offset 0x0545 - Warm Budget Ch0 Dimm1 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM +**/ + UINT8 WarmBudgetCh0Dimm1; + +/** Offset 0x0546 - Warm Budget Ch1 Dimm0 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM +**/ + UINT8 WarmBudgetCh1Dimm0; + +/** Offset 0x0547 - Warm Budget Ch1 Dimm1 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM +**/ + UINT8 WarmBudgetCh1Dimm1; + +/** Offset 0x0548 - Hot Budget Ch0 Dimm0 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM +**/ + UINT8 HotBudgetCh0Dimm0; + +/** Offset 0x0549 - Hot Budget Ch0 Dimm1 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM +**/ + UINT8 HotBudgetCh0Dimm1; + +/** Offset 0x054A - Hot Budget Ch1 Dimm0 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM +**/ + UINT8 HotBudgetCh1Dimm0; + +/** Offset 0x054B - Hot Budget Ch1 Dimm1 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM +**/ + UINT8 HotBudgetCh1Dimm1; + +/** Offset 0x054C - Idle Energy Ch0Dimm0 + Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) +**/ + UINT8 IdleEnergyCh0Dimm0; + +/** Offset 0x054D - Idle Energy Ch0Dimm1 + Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) +**/ + UINT8 IdleEnergyCh0Dimm1; + +/** Offset 0x054E - Idle Energy Ch1Dimm0 + Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) +**/ + UINT8 IdleEnergyCh1Dimm0; + +/** Offset 0x054F - Idle Energy Ch1Dimm1 + Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) +**/ + UINT8 IdleEnergyCh1Dimm1; + +/** Offset 0x0550 - PowerDown Energy Ch0Dimm0 + PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def) +**/ + UINT8 PdEnergyCh0Dimm0; + +/** Offset 0x0551 - PowerDown Energy Ch0Dimm1 + PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def) +**/ + UINT8 PdEnergyCh0Dimm1; + +/** Offset 0x0552 - PowerDown Energy Ch1Dimm0 + PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def) +**/ + UINT8 PdEnergyCh1Dimm0; + +/** Offset 0x0553 - PowerDown Energy Ch1Dimm1 + PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def) +**/ + UINT8 PdEnergyCh1Dimm1; + +/** Offset 0x0554 - Activate Energy Ch0Dimm0 + Activate Energy Contribution, range[255;0],(172= Def) +**/ + UINT8 ActEnergyCh0Dimm0; + +/** Offset 0x0555 - Activate Energy Ch0Dimm1 + Activate Energy Contribution, range[255;0],(172= Def) +**/ + UINT8 ActEnergyCh0Dimm1; + +/** Offset 0x0556 - Activate Energy Ch1Dimm0 + Activate Energy Contribution, range[255;0],(172= Def) +**/ + UINT8 ActEnergyCh1Dimm0; + +/** Offset 0x0557 - Activate Energy Ch1Dimm1 + Activate Energy Contribution, range[255;0],(172= Def) +**/ + UINT8 ActEnergyCh1Dimm1; + +/** Offset 0x0558 - Read Energy Ch0Dimm0 + Read Energy Contribution, range[255;0],(212= Def) +**/ + UINT8 RdEnergyCh0Dimm0; + +/** Offset 0x0559 - Read Energy Ch0Dimm1 + Read Energy Contribution, range[255;0],(212= Def) +**/ + UINT8 RdEnergyCh0Dimm1; + +/** Offset 0x055A - Read Energy Ch1Dimm0 + Read Energy Contribution, range[255;0],(212= Def) +**/ + UINT8 RdEnergyCh1Dimm0; + +/** Offset 0x055B - Read Energy Ch1Dimm1 + Read Energy Contribution, range[255;0],(212= Def) +**/ + UINT8 RdEnergyCh1Dimm1; + +/** Offset 0x055C - Write Energy Ch0Dimm0 + Write Energy Contribution, range[255;0],(221= Def) +**/ + UINT8 WrEnergyCh0Dimm0; + +/** Offset 0x055D - Write Energy Ch0Dimm1 + Write Energy Contribution, range[255;0],(221= Def) +**/ + UINT8 WrEnergyCh0Dimm1; + +/** Offset 0x055E - Write Energy Ch1Dimm0 + Write Energy Contribution, range[255;0],(221= Def) +**/ + UINT8 WrEnergyCh1Dimm0; + +/** Offset 0x055F - Write Energy Ch1Dimm1 + Write Energy Contribution, range[255;0],(221= Def) +**/ + UINT8 WrEnergyCh1Dimm1; + +/** Offset 0x0560 - Throttler CKEMin Timer + Timer value for CKEMin, range[255;0]. Req'd min of SC_ROUND_T + BYTE_LENGTH (4). + Dfault is 0x30 +**/ + UINT8 ThrtCkeMinTmr; + +/** Offset 0x0561 - Cke Rank Mapping + Bits [7:4] - Channel 1, bits [3:0] - Channel 0. 0xAA=Default Bit [i] specifies + which rank CKE[i] goes to. +**/ + UINT8 CkeRankMapping; + +/** Offset 0x0562 - Rapl Power Floor Ch0 + Power budget ,range[255;0],(0= 5.3W Def) +**/ + UINT8 RaplPwrFlCh0; + +/** Offset 0x0563 - Rapl Power Floor Ch1 + Power budget ,range[255;0],(0= 5.3W Def) +**/ + UINT8 RaplPwrFlCh1; + +/** Offset 0x0564 - Command Rate Support + CMD Rate and Limit Support Option. NOTE: ONLY supported in 1N Mode, Default is 3 CMDs + 0:Disable, 1:1 CMD, 2:2 CMDS, 3:3 CMDS, 4:4 CMDS, 5:5 CMDS, 6:6 CMDS, 7:7 CMDS +**/ + UINT8 EnCmdRate; + +/** Offset 0x0565 - REFRESH_2X_MODE + 0- (Default)Disabled 1-iMC enables 2xRef when Warm and Hot 2- iMC enables 2xRef when Hot + 0:Disable, 1:Enabled for WARM or HOT, 2:Enabled HOT only +**/ + UINT8 Refresh2X; + +/** Offset 0x0566 - Energy Performance Gain + Enable/disable(default) Energy Performance Gain. + $EN_DIS +**/ + UINT8 EpgEnable; + +/** Offset 0x0567 - Row Hammer Solution + Type of method used to prevent Row Hammer. Default is Hardware RHP + 0:Hardware RHP, 1:2x Refresh +**/ + UINT8 RhSolution; + +/** Offset 0x0568 - User Manual Threshold + Disabled: Predefined threshold will be used.\n + Enabled: User Input will be used. + $EN_DIS +**/ + UINT8 UserThresholdEnable; + +/** Offset 0x0569 - User Manual Budget + Disabled: Configuration of memories will defined the Budget value.\n + Enabled: User Input will be used. + $EN_DIS +**/ + UINT8 UserBudgetEnable; + +/** Offset 0x056A - TcritMax + Maximum Critical Temperature in Centigrade of the On-DIMM Thermal Sensor. TCRITMax + has to be greater than THIGHMax .\n + Critical temperature will be TcritMax +**/ + UINT8 TsodTcritMax; + +/** Offset 0x056B - Event mode + Disable:Comparator mode.\n + Enable:Interrupt mode + $EN_DIS +**/ + UINT8 TsodEventMode; + +/** Offset 0x056C - EVENT polarity + Disable:Active LOW.\n + Enable:Active HIGH + $EN_DIS +**/ + UINT8 TsodEventPolarity; + +/** Offset 0x056D - Critical event only + Disable:Trips on alarm or critical.\n + Enable:Trips only if criticaal temperature is reached + $EN_DIS +**/ + UINT8 TsodCriticalEventOnly; + +/** Offset 0x056E - Event output control + Disable:Event output disable.\n + Enable:Event output enabled + $EN_DIS +**/ + UINT8 TsodEventOutputControl; + +/** Offset 0x056F - Alarm window lock bit + Disable:Alarm trips are not locked and can be changed.\n + Enable:Alarm trips are locked and cannot be changed + $EN_DIS +**/ + UINT8 TsodAlarmwindowLockBit; + +/** Offset 0x0570 - Critical trip lock bit + Disable:Critical trip is not locked and can be changed.\n + Enable:Critical trip is locked and cannot be changed + $EN_DIS +**/ + UINT8 TsodCriticaltripLockBit; + +/** Offset 0x0571 - Shutdown mode + Disable:Temperature sensor enable.\n + Enable:Temperature sensor disable + $EN_DIS +**/ + UINT8 TsodShutdownMode; + +/** Offset 0x0572 - ThighMax + Thigh = ThighMax (Default is 93) +**/ + UINT8 TsodThigMax; + +/** Offset 0x0573 - User Manual Thig and Tcrit + Disabled(Default): Temperature will be given by the configuration of memories and + 1x or 2xrefresh rate.\n + Enabled: User Input will define for Thigh and Tcrit. + $EN_DIS +**/ + UINT8 TsodManualEnable; + +/** Offset 0x0574 - Force OLTM or 2X Refresh when needed + Disabled(Default): = Force OLTM.\n + Enabled: = Force 2x Refresh. + $EN_DIS +**/ + UINT8 ForceOltmOrRefresh2x; + +/** Offset 0x0575 - Pwr Down Idle Timer + The minimum value should = to the worst case Roundtrip delay + Burst_Length. 0 means + AUTO: 64 for ULX/ULT, 128 for DT/Halo +**/ + UINT8 PwdwnIdleCounter; + +/** Offset 0x0576 - Reserved +**/ + UINT8 Reserved26; + +/** Offset 0x0577 - Bitmask of ranks that have CA bus terminated + Offset 225 LPDDR4: Bitmask of ranks that have CA bus terminated. 0x01=Default, + Rank0 is terminating and Rank1 is non-terminating +**/ + UINT8 CmdRanksTerminated; + +/** Offset 0x0578 - Throttler CKEMin Timer for LPDDR + LPDDR Timer value for CKEMin, range[255;0]. Req'd min of SC_ROUND_T + BYTE_LENGTH + (4). Dfault is 0x40 +**/ + UINT8 ThrtCkeMinTmrLpddr; + +/** Offset 0x0579 - Retrain on Fast Fail + Restart MRC in Cold mode if SW MemTest fails during Fast flow. Default = Enabled + $EN_DIS +**/ + UINT8 RetrainOnFastFail; + +/** Offset 0x057A - Rank Margin Tool Per Bit + Enable/disable Rank Margin Tool Per Bit. + $EN_DIS +**/ + UINT8 RMTBIT; + +/** Offset 0x057B - PcdSerialDebugLevel + Serial Debug Message Level. 0:Disable, 1:Error Only, 2:Error & Warnings, 3:Load, + Error, Warnings & Info, 4:Load, Error, Warnings, Info & Event, 5:Load, Error, Warnings, + Info & Verbose. + 0:Disable, 1:Error Only, 2:Error and Warnings, 3:Load Error Warnings and Info, 4:Load + Error Warnings and Info & Event, 5:Load Error Warnings Info and Verbose +**/ + UINT8 PcdSerialDebugLevel; + +/** Offset 0x057C - Fivr Faults + Fivr Faults; 0: Disabled; 1: Enabled. + $EN_DIS +**/ + UINT8 FivrFaults; + +/** Offset 0x057D - Fivr Efficiency + Fivr Efficiency Management; 0: Disabled; 1: Enabled. + $EN_DIS +**/ + UINT8 FivrEfficiency; + +/** Offset 0x057E - Safe Mode Support + This option configures the varous items in the IO and MC to be more conservative.(def=Disable) + $EN_DIS +**/ + UINT8 SafeMode; + +/** Offset 0x057F - Ask MRC to clear memory content + Ask MRC to clear memory content 0: Do not Clear Memory; 1: Clear Memory. + $EN_DIS +**/ + UINT8 CleanMemory; + +/** Offset 0x0580 - LpDdrDqDqsReTraining + Enables/Disable LpDdrDqDqsReTraining + $EN_DIS +**/ + UINT8 LpDdrDqDqsReTraining; + +/** Offset 0x0581 - Reserved +**/ + UINT8 Reserved27; + +/** Offset 0x0582 - Post Code Output Port + This option configures Post Code Output Port +**/ + UINT16 PostCodeOutputPort; + +/** Offset 0x0584 - RMTLoopCount + Specifies the Loop Count to be used during Rank Margin Tool Testing. 0 - AUTO +**/ + UINT8 RMTLoopCount; + +/** Offset 0x0585 - TCSS Compatible Revision ID Enable + Set TCSS Crid . 0:Stepping Revision ID 1:Compatible Revision ID + $EN_DIS +**/ + UINT8 CridEnable; + +/** Offset 0x0586 - Reserved +**/ + UINT8 Reserved28[18]; + +/** Offset 0x0598 - Generate BIOS Data ACPI Table + Enable: Generate BDAT for MRC RMT or SA PCIe data. Disable (Default): Do not generate it + $EN_DIS +**/ + UINT8 BdatEnable; + +/** Offset 0x0599 - BdatTestType + Indicates the type of Memory Training data to populate into the BDAT ACPI table. + 0:RMT per Rank, 1:RMT per Bit, 2:Margin2D +**/ + UINT8 BdatTestType; + +/** Offset 0x059A - Size of PCIe IMR. + Size of PCIe IMR in megabytes +**/ + UINT16 PcieImrSize; + +/** Offset 0x059C - Enable PCIe IMR + 0: Disable(AUTO), 1: Enable + $EN_DIS +**/ + UINT8 PcieImrEnabled; + +/** Offset 0x059D - Reserved +**/ + UINT8 Reserved29[2]; + +/** Offset 0x059F - SerialDebugMrcLevel + MRC Serial Debug Message Level. 0:Disable, 1:Error Only, 2:Error & Warnings, 3:Load, + Error, Warnings & Info, 4:Load, Error, Warnings, Info & Event, 5:Load, Error, Warnings, + Info & Verbose. + 0:Disable, 1:Error Only, 2:Error and Warnings, 3:Load Error Warnings and Info, 4:Load + Error Warnings and Info & Event, 5:Load Error Warnings Info and Verbose +**/ + UINT8 SerialDebugMrcLevel; + +/** Offset 0x05A0 - Reserved +**/ + UINT8 Reserved30[18]; + +/** Offset 0x05B2 - Skip external display device scanning + Enable: Do not scan for external display device, Disable (Default): Scan external + display devices + $EN_DIS +**/ + UINT8 SkipExtGfxScan; + +/** Offset 0x05B3 - Lock PCU Thermal Management registers + Lock PCU Thermal Management registers. Enable(Default)=1, Disable=0 + $EN_DIS +**/ + UINT8 LockPTMregs; + +/** Offset 0x05B4 - Reserved +**/ + UINT8 Reserved31; + +/** Offset 0x05B5 - Panel Power Enable + Control for enabling/disabling VDD force bit (Required only for early enabling of + eDP panel). 0=Disable, 1(Default)=Enable + $EN_DIS +**/ + UINT8 PanelPowerEnable; + +/** Offset 0x05B6 - Reserved +**/ + UINT8 Reserved32[98]; + +/** Offset 0x0618 - TotalFlashSize + Enable/Disable. 0: Disable, define default value of TotalFlashSize , 1: enable +**/ + UINT16 TotalFlashSize; + +/** Offset 0x061A - BiosSize + The size of the BIOS region of the IFWI. Used if FspmUpd->FspmConfig.BiosGuard != + 0. If BiosGuard is enabled, MRC will increase the size of the DPR (DMA Protected + Range) so that a BIOS Update Script can be stored in the DPR. +**/ + UINT16 BiosSize; + +/** Offset 0x061C - TxtAcheckRequest + Enable/Disable. When Enabled, after memory training is done MRC will request an + ACHECK (Memory Alias Check) be done by TXT. + $EN_DIS +**/ + UINT8 TxtAcheckRequest; + +/** Offset 0x061D - Reserved +**/ + UINT8 Reserved33[11]; + +/** Offset 0x0628 - Smbus dynamic power gating + Disable or Enable Smbus dynamic power gating. + $EN_DIS +**/ + UINT8 SmbusDynamicPowerGating; + +/** Offset 0x0629 - Disable and Lock Watch Dog Register + Set 1 to clear WDT status, then disable and lock WDT registers. + $EN_DIS +**/ + UINT8 WdtDisableAndLock; + +/** Offset 0x062A - SMBUS SPD Write Disable + Set/Clear Smbus SPD Write Disable. 0: leave SPD Write Disable bit; 1: set SPD Write + Disable bit. For security recommendations, SPD write disable bit must be set. + $EN_DIS +**/ + UINT8 SmbusSpdWriteDisable; + +/** Offset 0x062B - VC Type + Virtual Channel Type Select: 0: VC0, 1: VC1. + 0: VC0, 1: VC1 +**/ + UINT8 PchHdaVcType; + +/** Offset 0x062C - Universal Audio Architecture compliance for DSP enabled system + 0: Not-UAA Compliant (Intel SST driver supported only), 1: UAA Compliant (HDA Inbox + driver or SST driver supported). + $EN_DIS +**/ + UINT8 PchHdaDspUaaCompliance; + +/** Offset 0x062D - Enable HD Audio Link + Enable/disable HD Audio Link. Muxed with SSP0/SSP1/SNDW1. + $EN_DIS +**/ + UINT8 PchHdaAudioLinkHdaEnable; + +/** Offset 0x062E - Reserved +**/ + UINT8 Reserved34[3]; + +/** Offset 0x0631 - Enable HD Audio DMIC_N Link + Enable/disable HD Audio DMIC1 link. Muxed with SNDW3. +**/ + UINT8 PchHdaAudioLinkDmicEnable[2]; + +/** Offset 0x0633 - Reserved +**/ + UINT8 Reserved35[17]; + +/** Offset 0x0644 - Enable HD Audio DSP + Enable/disable HD Audio DSP feature. + $EN_DIS +**/ + UINT8 PchHdaDspEnable; + +/** Offset 0x0645 - Reserved +**/ + UINT8 Reserved36[11]; + +/** Offset 0x0650 - Enable HD Audio SSP0 Link + Enable/disable HD Audio SSP_N/I2S link. Muxed with HDA. N-number 0-5 +**/ + UINT8 PchHdaAudioLinkSspEnable[6]; + +/** Offset 0x0656 - Enable HD Audio SoundWire#N Link + Enable/disable HD Audio SNDW#N link. Muxed with HDA. +**/ + UINT8 PchHdaAudioLinkSndwEnable[4]; + +/** Offset 0x065A - iDisp-Link Frequency + iDisp-Link Freq (PCH_HDAUDIO_LINK_FREQUENCY enum): 4: 96MHz, 3: 48MHz. + 4: 96MHz, 3: 48MHz +**/ + UINT8 PchHdaIDispLinkFrequency; + +/** Offset 0x065B - iDisp-Link T-mode + iDisp-Link T-Mode (PCH_HDAUDIO_IDISP_TMODE enum): 0: 2T, 2: 4T, 3: 8T, 4: 16T + 0: 2T, 2: 4T, 3: 8T, 4: 16T +**/ + UINT8 PchHdaIDispLinkTmode; + +/** Offset 0x065C - iDisplay Audio Codec disconnection + 0: Not disconnected, enumerable, 1: Disconnected SDI, not enumerable. + $EN_DIS +**/ + UINT8 PchHdaIDispCodecDisconnect; + +/** Offset 0x065D - Force ME DID Init Status + Test, 0: disable, 1: Success, 2: No Memory in Channels, 3: Memory Init Error, Set + ME DID init stat value + $EN_DIS +**/ + UINT8 DidInitStat; + +/** Offset 0x065E - CPU Replaced Polling Disable + Test, 0: disable, 1: enable, Setting this option disables CPU replacement polling loop + $EN_DIS +**/ + UINT8 DisableCpuReplacedPolling; + +/** Offset 0x065F - Check HECI message before send + Test, 0: disable, 1: enable, Enable/Disable message check. + $EN_DIS +**/ + UINT8 DisableMessageCheck; + +/** Offset 0x0660 - Skip MBP HOB + Test, 0: disable, 1: enable, Enable/Disable MOB HOB. + $EN_DIS +**/ + UINT8 SkipMbpHob; + +/** Offset 0x0661 - HECI2 Interface Communication + Test, 0: disable, 1: enable, Adds or Removes HECI2 Device from PCI space. + $EN_DIS +**/ + UINT8 HeciCommunication2; + +/** Offset 0x0662 - Enable KT device + Test, 0: disable, 1: enable, Enable or Disable KT device. + $EN_DIS +**/ + UINT8 KtDeviceEnable; + +/** Offset 0x0663 - Skip CPU replacement check + Test, 0: disable, 1: enable, Setting this option to skip CPU replacement check + $EN_DIS +**/ + UINT8 SkipCpuReplacementCheck; + +/** Offset 0x0664 - Serial Io Uart Debug Mode + Select SerialIo Uart Controller mode + 0:SerialIoUartDisabled, 1:SerialIoUartPci, 2:SerialIoUartHidden, 3:SerialIoUartCom, + 4:SerialIoUartSkipInit +**/ + UINT8 SerialIoUartDebugMode; + +/** Offset 0x0665 - Reserved +**/ + UINT8 Reserved37[19]; + +/** Offset 0x0678 - Avx2 Voltage Guardband Scaling Factor + AVX2 Voltage Guardband Scale factor applied to AVX2 workloads. Range is 0-200 in + 1/100 units, where a value of 125 would apply a 1.25 scale factor. +**/ + UINT8 Avx2VoltageScaleFactor; + +/** Offset 0x0679 - Avx512 Voltage Guardband Scaling Factor + AVX512 Voltage Guardband Scale factor applied to AVX512 workloads. Range is 0-200 + in 1/100 units, where a value of 125 would apply a 1.25 scale factor. +**/ + UINT8 Avx512VoltageScaleFactor; -/** Offset 0x0662 - Reserved +/** Offset 0x067A - Reserved **/ - UINT8 Reserved37[22]; + UINT8 Reserved38[22]; } FSP_M_CONFIG; /** Fsp M UPD Configuration @@ -607,11 +2727,11 @@ typedef struct { **/ FSP_M_CONFIG FspmConfig; -/** Offset 0x0678 +/** Offset 0x0690 **/ - UINT8 UnusedUpdSpace19[6]; + UINT8 UnusedUpdSpace21[6]; -/** Offset 0x067E +/** Offset 0x0696 **/ UINT16 UpdTerminator; } FSPM_UPD; diff --git a/src/vendorcode/intel/fsp/fsp2_0/jasperlake/FspsUpd.h b/src/vendorcode/intel/fsp/fsp2_0/jasperlake/FspsUpd.h index 6ec68c414c..1328d391d1 100644 --- a/src/vendorcode/intel/fsp/fsp2_0/jasperlake/FspsUpd.h +++ b/src/vendorcode/intel/fsp/fsp2_0/jasperlake/FspsUpd.h @@ -85,9 +85,26 @@ typedef struct { **/ typedef struct { -/** Offset 0x0020 - Reserved +/** Offset 0x0020 - Logo Pointer + Points to PEI Display Logo Image **/ - UINT8 Reserved0[16]; + UINT32 LogoPtr; + +/** Offset 0x0024 - Logo Size + Size of PEI Display Logo Image +**/ + UINT32 LogoSize; + +/** Offset 0x0028 - Blt Buffer Address + Address of Blt buffer +**/ + UINT32 BltBufferAddress; + +/** Offset 0x002C - Blt Buffer Size + Size of Blt Buffer, is equal to PixelWidth * PixelHeight * 4 bytes (the size of + EFI_GRAPHICS_OUTPUT_BLT_PIXEL) +**/ + UINT32 BltBufferSize; /** Offset 0x0030 - Graphics Configuration Ptr Points to VBT @@ -160,9 +177,44 @@ typedef struct { **/ UINT8 SdCardPowerEnableActiveHigh; -/** Offset 0x0052 - Reserved +/** Offset 0x0052 - Use tuned DLL values from policy + Set if FSP should use HS400 DLL values from policy + $EN_DIS +**/ + UINT8 SdCardUseCustomDlls; + +/** Offset 0x0053 - Reserved +**/ + UINT8 Reserved0; + +/** Offset 0x0054 - SdCard Tx CMD Delay control register value + Please see Tx CMD Delay Control register definition for help +**/ + UINT32 SdCardTxCmdDelayRegValue; + +/** Offset 0x0058 - SdCard Tx DATA Delay control 1 register value + Please see Tx DATA Delay control 1 register definition for help +**/ + UINT32 SdCardTxDataDelay1RegValue; + +/** Offset 0x005C - SdCard Tx DATA Delay control 2 register value + Please see Tx DATA Delay control 2 register definition for help +**/ + UINT32 SdCardTxDataDelay2RegValue; + +/** Offset 0x0060 - SdCard Rx CMD + DATA Delay control 1 register value + Please see Rx CMD + DATA Delay control 1 register definition for help +**/ + UINT32 SdCardRxCmdDataDelay1RegValue; + +/** Offset 0x0064 - SdCard Rx CMD + DATA Delay control 2 register value + Please see Rx CMD + DATA Delay control 2 register definition for help +**/ + UINT32 SdCardRxCmdDataDelay2RegValue; + +/** Offset 0x0068 - Reserved **/ - UINT8 Reserved1[34]; + UINT8 Reserved1[12]; /** Offset 0x0074 - SdCard Command Pad Termination 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up, @@ -172,7 +224,27 @@ typedef struct { /** Offset 0x0075 - Reserved **/ - UINT8 Reserved2[135]; + UINT8 Reserved2[124]; + +/** Offset 0x00F1 - Show SPI controller + Enable/disable to show SPI controller. + $EN_DIS +**/ + UINT8 ShowSpiController; + +/** Offset 0x00F2 - Reserved +**/ + UINT8 Reserved3[2]; + +/** Offset 0x00F4 - MicrocodeRegionBase + Memory Base of Microcode Updates +**/ + UINT32 MicrocodeRegionBase; + +/** Offset 0x00F8 - MicrocodeRegionSize + Size of Microcode Updates +**/ + UINT32 MicrocodeRegionSize; /** Offset 0x00FC - Turbo Mode Enable/Disable Turbo mode. 0: disable, 1: enable @@ -218,7 +290,65 @@ typedef struct { /** Offset 0x0129 - Reserved **/ - UINT8 Reserved3[28]; + UINT8 Reserved4[3]; + +/** Offset 0x012C - Address of PCH_DEVICE_INTERRUPT_CONFIG table. + The address of the table of PCH_DEVICE_INTERRUPT_CONFIG. +**/ + UINT32 DevIntConfigPtr; + +/** Offset 0x0130 - Number of DevIntConfig Entry + Number of Device Interrupt Configuration Entry. If this is not zero, the DevIntConfigPtr + must not be NULL. +**/ + UINT8 NumOfDevIntConfig; + +/** Offset 0x0131 - PIRQx to IRQx Map Config + PIRQx to IRQx mapping. The valid value is 0x00 to 0x0F for each. First byte is for + PIRQA, second byte is for PIRQB, and so on. The setting is only available in Legacy + 8259 PCI mode. +**/ + UINT8 PxRcConfig[8]; + +/** Offset 0x0139 - Select GPIO IRQ Route + GPIO IRQ Select. The valid value is 14 or 15. +**/ + UINT8 GpioIrqRoute; + +/** Offset 0x013A - Select SciIrqSelect + SCI IRQ Select. The valid value is 9, 10, 11, and 20, 21, 22, 23 for APIC only. +**/ + UINT8 SciIrqSelect; + +/** Offset 0x013B - Select TcoIrqSelect + TCO IRQ Select. The valid value is 9, 10, 11, 20, 21, 22, 23. +**/ + UINT8 TcoIrqSelect; + +/** Offset 0x013C - Enable/Disable Tco IRQ + Enable/disable TCO IRQ + $EN_DIS +**/ + UINT8 TcoIrqEnable; + +/** Offset 0x013D - PCH HDA Verb Table Entry Number + Number of Entries in Verb Table. +**/ + UINT8 PchHdaVerbTableEntryNum; + +/** Offset 0x013E - Reserved +**/ + UINT8 Reserved5[2]; + +/** Offset 0x0140 - PCH HDA Verb Table Pointer + Pointer to Array of pointers to Verb Table. +**/ + UINT32 PchHdaVerbTablePtr; + +/** Offset 0x0144 - PCH HDA Codec Sx Wake Capability + Capability to detect wake initiated by a codec in Sx +**/ + UINT8 PchHdaCodecSxWakeCapability; /** Offset 0x0145 - Enable SATA Enable/disable SATA controller. @@ -246,7 +376,13 @@ typedef struct { /** Offset 0x015C - Reserved **/ - UINT8 Reserved4[21]; + UINT8 Reserved6[14]; + +/** Offset 0x016A - SPIn Default Chip Select Output + Sets Default CS as Output. N represents controller index: SPI0, SPI1, ... Available + options: 0:CS0, 1:CS1 +**/ + UINT8 SerialIoSpiDefaultCsOutput[7]; /** Offset 0x0171 - SPIn Default Chip Select Mode HW/SW Sets Default CS Mode Hardware or Software. N represents controller index: SPI0, @@ -269,7 +405,47 @@ typedef struct { /** Offset 0x0186 - Reserved **/ - UINT8 Reserved5[186]; + UINT8 Reserved7[2]; + +/** Offset 0x0188 - Default BaudRate for each Serial IO UART + Set default BaudRate Supported from 0 - default to 6000000 +**/ + UINT32 SerialIoUartBaudRate[7]; + +/** Offset 0x01A4 - Default ParityType for each Serial IO UART + Set default Parity. 0: DefaultParity, 1: NoParity, 2: EvenParity, 3: OddParity +**/ + UINT8 SerialIoUartParity[7]; + +/** Offset 0x01AB - Default DataBits for each Serial IO UART + Set default word length. 0: Default, 5,6,7,8 +**/ + UINT8 SerialIoUartDataBits[7]; + +/** Offset 0x01B2 - Default StopBits for each Serial IO UART + Set default stop bits. 0: DefaultStopBits, 1: OneStopBit, 2: OneFiveStopBits, 3: + TwoStopBits +**/ + UINT8 SerialIoUartStopBits[7]; + +/** Offset 0x01B9 - Power Gating mode for each Serial IO UART that works in COM mode + Set Power Gating. 0: Disabled, 1: Enabled, 2: Auto +**/ + UINT8 SerialIoUartPowerGating[7]; + +/** Offset 0x01C0 - Enable Dma for each Serial IO UART that supports it + Set DMA/PIO mode. 0: Disabled, 1: Enabled +**/ + UINT8 SerialIoUartDmaEnable[7]; + +/** Offset 0x01C7 - Enables UART hardware flow control, CTS and RTS lines + Enables UART hardware flow control, CTS and RTS lines. +**/ + UINT8 SerialIoUartAutoFlow[7]; + +/** Offset 0x01CE - Reserved +**/ + UINT8 Reserved8[114]; /** Offset 0x0240 - UART Number For Debug Purpose UART number for debug purpose. 0:UART0, 1:UART1, 2:UART2, 3:UART3, 4:UART4, 5:UART5, @@ -279,9 +455,11 @@ typedef struct { **/ UINT8 SerialIoDebugUartNumber; -/** Offset 0x0241 - Reserved +/** Offset 0x0241 - Serial IO UART DBG2 table + Enable or disable Serial Io UART DBG2 table, default is Disable; 0: Disable; + 1: Enable. **/ - UINT8 Reserved6[7]; + UINT8 SerialIoUartDbg2[7]; /** Offset 0x0248 - I2Cn Device Mode Selects I2c operation mode. N represents controller index: I2c0, I2c1, ... Available @@ -301,9 +479,12 @@ typedef struct { **/ UINT32 PchSerialIoI2cSclPinMux[8]; -/** Offset 0x0290 - Reserved +/** Offset 0x0290 - PCH SerialIo I2C Pads Termination + 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up, + 0x19: 20kOhm weak pull-up - Enable/disable SerialIo I2C0,I2C1,... pads termination + respectively. One byte for each controller, byte0 for I2C0, byte1 for I2C1, and so on. **/ - UINT8 Reserved7[8]; + UINT8 PchSerialIoI2cPadsTermination[8]; /** Offset 0x0298 - USB Per Port HS Preemphasis Bias USB Per Port HS Preemphasis Bias. 000b-0mV, 001b-11.25mV, 010b-16.9mV, 011b-28.15mV, @@ -361,7 +542,34 @@ typedef struct { /** Offset 0x0301 - Reserved **/ - UINT8 Reserved8[81]; + UINT8 Reserved9[72]; + +/** Offset 0x0349 - USB PDO Programming + Enable/disable PDO programming for USB in PEI phase. Disabling will allow for programming + during later phase. 1: enable, 0: disable + $EN_DIS +**/ + UINT8 UsbPdoProgramming; + +/** Offset 0x034A - Reserved +**/ + UINT8 Reserved10[2]; + +/** Offset 0x034C - Power button debounce configuration + Debounce time for PWRBTN in microseconds. For values not supported by HW, they will + be rounded down to closest supported on. 0: disable, 250-1024000us: supported range +**/ + UINT32 PmcPowerButtonDebounce; + +/** Offset 0x0350 - PCH eSPI Master and Slave BME enabled + PCH eSPI Master and Slave BME enabled + $EN_DIS +**/ + UINT8 PchEspiBmeMasterSlaveEnabled; + +/** Offset 0x0351 - Reserved +**/ + UINT8 Reserved11; /** Offset 0x0352 - Mask to enable the usage of external V1p05 VR rail in specific S0ix or Sx states Enable External V1P05 Rail in: BIT0:S0i1/S0i2, BIT1:S0i3, BIT2:S3, BIT3:S4, BIT5:S5 @@ -370,7 +578,7 @@ typedef struct { /** Offset 0x0353 - Reserved **/ - UINT8 Reserved9; + UINT8 Reserved12; /** Offset 0x0354 - External V1P05 Voltage Value that will be used in S0i2/S0i3 states Value is given in 2.5mV increments (0=0mV, 1=2.5mV, 2=5mV...) @@ -382,9 +590,10 @@ typedef struct { **/ UINT8 PchFivrExtV1p05RailIccMax; -/** Offset 0x0357 - Reserved +/** Offset 0x0357 - Mask to enable the usage of external Vnn VR rail in specific S0ix or Sx states + Enable External Vnn Rail in: BIT0:S0i1/S0i2, BIT1:S0i3, BIT2:S3, BIT3:S4, BIT5:S5 **/ - UINT8 Reserved10; + UINT8 PchFivrExtVnnRailEnabledStates; /** Offset 0x0358 - External Vnn Voltage Value that will be used in S0ix/Sx states Value is given in 2.5mV increments (0=0mV, 1=2.5mV, 2=5mV...) @@ -437,9 +646,43 @@ typedef struct { **/ UINT16 PchFivrVccinAuxOffToHighCurModeVolTranTime; -/** Offset 0x0364 - Reserved +/** Offset 0x0364 - Trace Hub Memory Base + If Trace Hub is enabled and trace to memory is desired, BootLoader needs to allocate + trace hub memory as reserved and uncacheable, set the base to ensure Trace Hub + memory is configured properly. +**/ + UINT32 TraceHubMemBase; + +/** Offset 0x0368 - PMC Debug Message Enable + When Enabled, PMC HW will send debug messages to trace hub; When Disabled, PMC HW + will never send debug meesages to trace hub. Noted: When Enabled, may not enter S0ix + $EN_DIS +**/ + UINT8 PmcDbgMsgEn; + +/** Offset 0x0369 - Reserved **/ - UINT8 Reserved11[20]; + UINT8 Reserved13[3]; + +/** Offset 0x036C - Pointer of ChipsetInit Binary + ChipsetInit Binary Pointer. +**/ + UINT32 ChipsetInitBinPtr; + +/** Offset 0x0370 - Length of ChipsetInit Binary + ChipsetInit Binary Length. +**/ + UINT32 ChipsetInitBinLen; + +/** Offset 0x0374 - FIVR Dynamic Power Management + Enable/Disable FIVR Dynamic Power Management. + $EN_DIS +**/ + UINT8 PchFivrDynPm; + +/** Offset 0x0375 - Reserved +**/ + UINT8 Reserved14[3]; /** Offset 0x0378 - CNVi Configuration This option allows for automatic detection of Connectivity Solution. [Auto Detection] @@ -462,7 +705,7 @@ typedef struct { /** Offset 0x037B - Reserved **/ - UINT8 Reserved12; + UINT8 Reserved15; /** Offset 0x037C - CNVi RF_RESET pin muxing Select CNVi RF_RESET# pin depending on board routing. ICP-N: GPP_H12 = 0x2746E40C(default) @@ -476,9 +719,154 @@ typedef struct { **/ UINT32 CnviClkreqPinMux; -/** Offset 0x0384 - Reserved +/** Offset 0x0384 - Enable Host C10 reporting through eSPI + Enable/disable Host C10 reporting to Slave via eSPI Virtual Wire. + $EN_DIS +**/ + UINT8 PchEspiHostC10ReportEnable; + +/** Offset 0x0385 - PCH USB2 PHY Power Gating enable + 1: Will enable USB2 PHY SUS Well Power Gating, 0: Will not enable PG of USB2 PHY + Sus Well PG + $EN_DIS +**/ + UINT8 PmcUsb2PhySusPgEnable; + +/** Offset 0x0386 - PCH USB OverCurrent mapping enable + 1: Will program USB OC pin mapping in xHCI controller memory, 0: Will clear OC pin + mapping allow for NOA usage of OC pins + $EN_DIS +**/ + UINT8 PchUsbOverCurrentEnable; + +/** Offset 0x0387 - Espi Lgmr Memory Range decode + This option enables or disables espi lgmr + $EN_DIS +**/ + UINT8 PchEspiLgmrEnable; + +/** Offset 0x0388 - Reserved +**/ + UINT8 Reserved16[2]; + +/** Offset 0x038A - PCHHOT# pin + Enable PCHHOT# pin assertion when temperature is higher than PchHotLevel. 0: disable, 1: enable + $EN_DIS +**/ + UINT8 PchHotEnable; + +/** Offset 0x038B - SATA LED + SATA LED indicating SATA controller activity. 0: disable, 1: enable + $EN_DIS +**/ + UINT8 SataLedEnable; + +/** Offset 0x038C - VRAlert# Pin + When VRAlert# feature pin is enabled and its state is '0', the PMC requests throttling + to a T3 Tstate to the PCH throttling unit.. 0: disable, 1: enable + $EN_DIS +**/ + UINT8 PchPmVrAlert; + +/** Offset 0x038D - AMT Switch + Enable/Disable. 0: Disable, 1: enable, Enable or disable AMT functionality. + $EN_DIS +**/ + UINT8 AmtEnabled; + +/** Offset 0x038E - WatchDog Timer Switch + Enable/Disable. 0: Disable, 1: enable, Enable or disable WatchDog timer. Setting + is invalid if AmtEnabled is 0. + $EN_DIS +**/ + UINT8 WatchDogEnabled; + +/** Offset 0x038F - Manageability Mode set by Mebx + Enable/Disable. 0: Disable, 1: enable, Enable or disable Manageability Mode. + $EN_DIS +**/ + UINT8 ManageabilityMode; + +/** Offset 0x0390 - PET Progress + Enable/Disable. 0: Disable, 1: enable, Enable/Disable PET Events Progress to receive + PET Events. Setting is invalid if AmtEnabled is 0. + $EN_DIS +**/ + UINT8 FwProgress; + +/** Offset 0x0391 - SOL Switch + Enable/Disable. 0: Disable, 1: enable, Serial Over Lan enable/disable state by Mebx. + Setting is invalid if AmtEnabled is 0. + $EN_DIS +**/ + UINT8 AmtSolEnabled; + +/** Offset 0x0392 - OS Timer + 16 bits Value, Set OS watchdog timer. Setting is invalid if AmtEnabled is 0. +**/ + UINT16 WatchDogTimerOs; + +/** Offset 0x0394 - BIOS Timer + 16 bits Value, Set BIOS watchdog timer. Setting is invalid if AmtEnabled is 0. +**/ + UINT16 WatchDogTimerBios; + +/** Offset 0x0396 - Remote Assistance Trigger Availablilty + Enable/Disable. 0: Disable, 1: enable, Remote Assistance enable/disable state by Mebx. + $EN_DIS +**/ + UINT8 RemoteAssistance; + +/** Offset 0x0397 - KVM Switch + Enable/Disable. 0: Disable, 1: enable, KVM enable/disable state by Mebx. Setting + is invalid if AmtEnabled is 0. + $EN_DIS +**/ + UINT8 AmtKvmEnabled; + +/** Offset 0x0398 - KVM Switch + Enable/Disable. 0: Disable, 1: enable, KVM enable/disable state by Mebx. + $EN_DIS +**/ + UINT8 ForcMebxSyncUp; + +/** Offset 0x0399 - PCH PCIe root port connection type + 0: built-in device, 1:slot +**/ + UINT8 PcieRpSlotImplemented[24]; + +/** Offset 0x03B1 - PCIE RP Access Control Services Extended Capability + Enable/Disable PCIE RP Access Control Services Extended Capability +**/ + UINT8 PcieRpAcsEnabled[24]; + +/** Offset 0x03C9 - PCIE RP Clock Power Management + Enable/Disable PCIE RP Clock Power Management, even if disabled, CLKREQ# signal + can still be controlled by L1 PM substates mechanism +**/ + UINT8 PcieRpEnableCpm[24]; + +/** Offset 0x03E1 - Reserved +**/ + UINT8 Reserved17; + +/** Offset 0x03E2 - PCIE RP Detect Timeout Ms + The number of milliseconds within 0~65535 in reference code will wait for link to + exit Detect state for enabled ports before assuming there is no device and potentially + disabling the port. +**/ + UINT16 PcieRpDetectTimeoutMs[24]; + +/** Offset 0x0412 - ModPHY SUS Power Domain Dynamic Gating + Enable/Disable ModPHY SUS Power Domain Dynamic Gating. Setting not supported on + PCH-H. 0: disable, 1: enable + $EN_DIS +**/ + UINT8 PmcModPhySusPgEnable; + +/** Offset 0x0413 - Reserved **/ - UINT8 Reserved13[145]; + UINT8 Reserved18[2]; /** Offset 0x0415 - Enable/Disable PavpEnable Enable(Default): Enable PavpEnable, Disable: Disable PavpEnable @@ -502,209 +890,2001 @@ typedef struct { **/ UINT8 PeiGraphicsPeimInit; -/** Offset 0x0418 - Reserved +/** Offset 0x0418 - Enable or disable GNA device + 0=Disable, 1(Default)=Enable + $EN_DIS **/ - UINT8 Reserved14[152]; + UINT8 GnaEnable; -/** Offset 0x04B0 - Skip Multi-Processor Initialization - When this is skipped, boot loader must initialize processors before SilicionInit - API. 0: Initialize; 1: Skip - $EN_DIS +/** Offset 0x0419 - Reserved **/ - UINT8 SkipMpInit; + UINT8 Reserved19[11]; -/** Offset 0x04B1 - Reserved +/** Offset 0x0424 - Enable/Disable CrashLog + Enable(Default): Enable CPU CrashLog, Disable: Disable CPU CrashLog + $EN_DIS **/ - UINT8 Reserved15[11]; + UINT8 CpuCrashLogEnable; -/** Offset 0x04BC - CpuMpPpi - Optional pointer to the boot loader's implementation of EFI_PEI_MP_SERVICES_PPI. - If not NULL, FSP will use the boot loader's implementation of multiprocessing. - See section 5.1.4 of the FSP Integration Guide for more details. +/** Offset 0x0425 - Advanced Encryption Standard (AES) feature + Enable or Disable Advanced Encryption Standard (AES) feature; 0: Disable; 1: Enable + $EN_DIS **/ - UINT32 CpuMpPpi; + UINT8 AesEnable; -/** Offset 0x04C0 - Reserved +/** Offset 0x0426 - Power State 3 enable/disable + PCODE MMIO Mailbox: Power State 3 enable/disable; 0: Disable; 1: Enable. + For all VR Indexes **/ - UINT8 Reserved16[83]; + UINT8 Psi3Enable[5]; -/** Offset 0x0513 - Enable LOCKDOWN BIOS LOCK - Enable the BIOS Lock feature and set EISS bit (D31:F5:RegDCh[5]) for the BIOS region - protection. - $EN_DIS +/** Offset 0x042B - Power State 4 enable/disable + PCODE MMIO Mailbox: Power State 4 enable/disable; 0: Disable; 1: Enable.For + all VR Indexes **/ - UINT8 PchLockDownBiosLock; + UINT8 Psi4Enable[5]; -/** Offset 0x0514 - Reserved +/** Offset 0x0430 - Imon slope correction + PCODE MMIO Mailbox: Imon slope correction. Specified in 1/100 increment values. + Range is 0-200. 125 = 1.25. 0: Auto.For all VR Indexes **/ - UINT8 Reserved17[2]; + UINT16 ImonSlope[5]; -/** Offset 0x0516 - RTC Cmos Memory Lock - Enable RTC lower and upper 128 byte Lock bits to lock Bytes 38h-3Fh in the upper - and and lower 128-byte bank of RTC RAM. - $EN_DIS +/** Offset 0x043A - Imon offset correction + PCODE MMIO Mailbox: Imon offset correction. Value is a 2's complement signed integer. + Units 1/1000, Range 0-63999. For an offset = 12.580, use 12580. 0: Auto **/ - UINT8 RtcMemoryLock; + UINT16 ImonOffset[5]; -/** Offset 0x0517 - Reserved +/** Offset 0x0444 - Enable/Disable BIOS configuration of VR + Enable/Disable BIOS configuration of VR; 0: Disable; 1: Enable.For all VR Indexes **/ - UINT8 Reserved18[24]; + UINT8 VrConfigEnable[5]; -/** Offset 0x052F - Enable PCIE RP Pm Sci - Indicate whether the root port power manager SCI is enabled. +/** Offset 0x0449 - Thermal Design Current enable/disable + PCODE MMIO Mailbox: Thermal Design Current enable/disable; 0: Disable; 1: + Enable.For all VR Indexes **/ - UINT8 PcieRpPmSci[24]; + UINT8 TdcEnable[5]; -/** Offset 0x0547 - Reserved +/** Offset 0x044E - Reserved **/ - UINT8 Reserved19[24]; + UINT8 Reserved20[2]; -/** Offset 0x055F - Enable PCIE RP Clk Req Detect - Probe CLKREQ# signal before enabling CLKREQ# based power management. +/** Offset 0x0450 - Thermal Design Current time window + PCODE MMIO Mailbox: Thermal Design Current time window. Defined in milli seconds. + Range 1ms to 448s **/ - UINT8 PcieRpClkReqDetect[24]; + UINT32 TdcTimeWindow[5]; -/** Offset 0x0577 - Reserved +/** Offset 0x0464 - Thermal Design Current Lock + PCODE MMIO Mailbox: Thermal Design Current Lock; 0: Disable; 1: Enable.For + all VR Indexes **/ - UINT8 Reserved20[455]; + UINT8 TdcLock[5]; -/** Offset 0x073E - PCH Pm Slp S3 Min Assert - SLP_S3 Minimum Assertion Width Policy. Default is PchSlpS350ms. +/** Offset 0x0469 - Platform Psys slope correction + PCODE MMIO Mailbox: Platform Psys slope correction. 0 - Auto Specified in + 1/100 increment values. Range is 0-200. 125 = 1.25 **/ - UINT8 PchPmSlpS3MinAssert; + UINT8 PsysSlope; -/** Offset 0x073F - Reserved +/** Offset 0x046A - Platform Psys offset correction + PCODE MMIO Mailbox: Platform Psys offset correction. 0 - Auto Units 1/1000, + Range 0-63999. For an offset of 25.348, enter 25348. **/ - UINT8 Reserved21; + UINT16 PsysOffset; -/** Offset 0x0740 - PCH Pm Slp Sus Min Assert - SLP_SUS Minimum Assertion Width Policy. Default is PchSlpSus4s. +/** Offset 0x046C - Acoustic Noise Mitigation feature + Enable or Disable Acoustic Noise Mitigation feature. 0: Disabled; 1: Enabled + $EN_DIS **/ - UINT8 PchPmSlpSusMinAssert; + UINT8 AcousticNoiseMitigation; -/** Offset 0x0741 - PCH Pm Slp A Min Assert - SLP_A Minimum Assertion Width Policy. Default is PchSlpA2s. +/** Offset 0x046D - Reserved **/ - UINT8 PchPmSlpAMinAssert; + UINT8 Reserved21[21]; -/** Offset 0x0742 - Reserved +/** Offset 0x0482 - AcLoadline + PCODE MMIO Mailbox: AcLoadline in 1/100 mOhms (ie. 1250 = 12.50 mOhm); Range is + 0-6249. Intel Recommended Defaults vary by domain and SKU. **/ - UINT8 Reserved22[11]; + UINT16 AcLoadline[5]; -/** Offset 0x074D - PCH Sata Pwr Opt Enable - SATA Power Optimizer on PCH side. - $EN_DIS +/** Offset 0x048C - DcLoadline + PCODE MMIO Mailbox: DcLoadline in 1/100 mOhms (ie. 1250 = 12.50 mOhm); Range is + 0-6249.Intel Recommended Defaults vary by domain and SKU. **/ - UINT8 SataPwrOptEnable; + UINT16 DcLoadline[5]; -/** Offset 0x074E - Reserved +/** Offset 0x0496 - Power State 1 Threshold current + PCODE MMIO Mailbox: Power State 1 current cuttof in 1/4 Amp increments. Range is 0-128A. **/ - UINT8 Reserved23[146]; + UINT16 Psi1Threshold[5]; -/** Offset 0x07E0 - USB2 Port Over Current Pin - Describe the specific over current pin number of USB 2.0 Port N. +/** Offset 0x04A0 - Power State 2 Threshold current + PCODE MMIO Mailbox: Power State 2 current cuttof in 1/4 Amp increments. Range is 0-128A. **/ - UINT8 Usb2OverCurrentPin[16]; + UINT16 Psi2Threshold[5]; -/** Offset 0x07F0 - USB3 Port Over Current Pin - Describe the specific over current pin number of USB 3.0 Port N. +/** Offset 0x04AA - Power State 3 Threshold current + PCODE MMIO Mailbox: Power State 3 current cuttof in 1/4 Amp increments. Range is 0-128A. **/ - UINT8 Usb3OverCurrentPin[10]; + UINT16 Psi3Threshold[5]; -/** Offset 0x07FA - Enable 8254 Static Clock Gating - Set 8254CGE=1 is required for SLP_S0 support. However, set 8254CGE=1 in POST time - might fail to boot legacy OS using 8254 timer. Make sure it is disabled to support - legacy OS using 8254 timer. Also enable this while S0ix is enabled. - $EN_DIS +/** Offset 0x04B4 - Icc Max limit + PCODE MMIO Mailbox: VR Icc Max limit. 0-255A in 1/4 A units. 400 = 100A **/ - UINT8 Enable8254ClockGating; + UINT16 IccMax[5]; -/** Offset 0x07FB - Enable 8254 Static Clock Gating On S3 - This is only applicable when Enable8254ClockGating is disabled. FSP will do the - 8254 CGE programming on S3 resume when Enable8254ClockGatingOnS3 is enabled. This - avoids the SMI requirement for the programming. +/** Offset 0x04BE - Enable VR specific mailbox command + VR specific mailbox commands. 00b - no VR specific command sent. 01b - A + VR mailbox command specifically for the MPS IMPV8 VR will be sent. 10b - VR specific + command sent for PS4 exit issue. 11b - Reserved. $EN_DIS **/ - UINT8 Enable8254ClockGatingOnS3; + UINT8 SendVrMbxCmd; -/** Offset 0x07FC - Reserved +/** Offset 0x04BF - Enable or Disable TXT + Enable or Disable TXT; 0: Disable; 1: Enable. + $EN_DIS **/ - UINT8 Reserved24[487]; + UINT8 TxtEnable; -/** Offset 0x09E3 - Enable/Disable IGFX PmSupport - Enable(Default): Enable IGFX PmSupport, Disable: Disable IGFX PmSupport +/** Offset 0x04C0 - Skip Multi-Processor Initialization + When this is skipped, boot loader must initialize processors before SilicionInit + API. 0: Initialize; 1: Skip $EN_DIS **/ - UINT8 PmSupport; + UINT8 SkipMpInit; -/** Offset 0x09E4 - Reserved +/** Offset 0x04C1 - Reserved **/ - UINT8 Reserved25[32]; + UINT8 Reserved22; -/** Offset 0x0A04 - TCC Activation Offset - TCC Activation Offset. Offset from factory set TCC activation temperature at which - the Thermal Control Circuit must be activated. TCC will be activated at TCC Activation - Temperature, in volts.For SKL Y SKU, the recommended default for this policy is - 10, For all other SKUs the recommended default are 0 +/** Offset 0x04C2 - FIVR RFI Frequency + PCODE MMIO Mailbox: Set the desired RFI frequency, in increments of 100KHz. 0: + Auto. Range varies based on XTAL clock: 0-1918 (Up to 191.8HMz) for 24MHz clock; + 0-1535 (Up to 153.5MHz) for 19MHz clock. **/ - UINT8 TccActivationOffset; + UINT16 FivrRfiFrequency; -/** Offset 0x0A05 - Reserved +/** Offset 0x04C4 - FIVR RFI Spread Spectrum + PCODE MMIO Mailbox: FIVR RFI Spread Spectrum, in 0.1% increments. 0: 0%; + Range: 0.0% to 10.0% (0-100). **/ - UINT8 Reserved26[34]; + UINT8 FivrSpreadSpectrum; -/** Offset 0x0A27 - Enable or Disable CPU power states (C-states) - Enable or Disable CPU power states (C-states). 0: Disable; 1: Enable - $EN_DIS +/** Offset 0x04C5 - Reserved **/ - UINT8 Cx; + UINT8 Reserved23[3]; -/** Offset 0x0A28 - Reserved +/** Offset 0x04C8 - CpuBistData + Pointer CPU BIST Data **/ - UINT8 Reserved27[74]; + UINT32 CpuBistData; -/** Offset 0x0A72 - Platform Power Pmax - PCODE MMIO Mailbox: Platform Power Pmax. 0 - Auto Specified in 1/8 Watt increments. - Range 0-1024 Watts. Value of 800 = 100W +/** Offset 0x04CC - CpuMpPpi + Optional pointer to the boot loader's implementation of EFI_PEI_MP_SERVICES_PPI. + If not NULL, FSP will use the boot loader's implementation of multiprocessing. + See section 5.1.4 of the FSP Integration Guide for more details. **/ - UINT16 PsysPmax; + UINT32 CpuMpPpi; -/** Offset 0x0A74 - Reserved +/** Offset 0x04D0 - CpuMpHob + Optional pointer for CpuMpHob. If the boot loader is a UEFI boot loader using + API mode instead of dispatch mode, and FspsUpd->FspsConfig.CpuMpPpi != NULL, then + FspsUpd->FspsConfig.CpuMpHob must be != NULL. See section 5.1.4 of the FSP Integration + Guide for more details. **/ - UINT8 Reserved28[115]; + UINT32 CpuMpHob; -/** Offset 0x0AE7 - End of Post message - Test, Send End of Post message. Disable(0x0): Disable EOP message, Send in PEI(0x1): - EOP send in PEI, Send in DXE(0x2)(Default): EOP send in DXE - 0:Disable, 1:Send in PEI, 2:Send in DXE, 3:Reserved +/** Offset 0x04D4 - Reserved **/ - UINT8 EndOfPostMessage; + UINT8 Reserved24[16]; -/** Offset 0x0AE8 - Reserved +/** Offset 0x04E4 - PpinSupport to view Protected Processor Inventory Number + Enable or Disable or Auto (Based on End of Manufacturing flag. Disabled if this + flag is set) for PPIN Support + 0: Disable, 1: Enable, 2: Auto **/ - UINT8 Reserved29; + UINT8 PpinSupport; -/** Offset 0x0AE9 - Enable LOCKDOWN SMI - Enable SMI_LOCK bit to prevent writes to the Global SMI Enable bit. +/** Offset 0x04E5 - Enable or Disable Minimum Voltage Override + Enable or disable Minimum Voltage overrides ; 0: Disable; 1: Enable. $EN_DIS **/ - UINT8 PchLockDownGlobalSmi; + UINT8 EnableMinVoltageOverride; -/** Offset 0x0AEA - Enable LOCKDOWN BIOS Interface - Enable BIOS Interface Lock Down bit to prevent writes to the Backup Control Register. - $EN_DIS +/** Offset 0x04E6 - Min Voltage for Runtime + PCODE MMIO Mailbox: Minimum voltage for runtime. Valid if EnableMinVoltageOverride + = 1. Range 0 to 1999mV. 0: 0mV **/ - UINT8 PchLockDownBiosInterface; + UINT16 MinVoltageRuntime; -/** Offset 0x0AEB - Unlock all GPIO pads - Force all GPIO pads to be unlocked for debug purpose. +/** Offset 0x04E8 - Base of memory region allocated for Processor Trace + Base address of memory region allocated for Processor Trace. Processor Trace requires + 2^N alignment and size in bytes per thread, from 4KB to 128MB. 0: Disable +**/ + UINT64 ProcessorTraceMemBase; + +/** Offset 0x04F0 - Memory region allocation for Processor Trace + Length in bytes of memory region allocated for Processor Trace. Processor Trace + requires 2^N alignment and size in bytes per thread, from 4KB to 128MB. 0: Disable +**/ + UINT32 ProcessorTraceMemLength; + +/** Offset 0x04F4 - Min Voltage for C8 + PCODE MMIO Mailbox: Minimum voltage for C8. Valid if EnableMinVoltageOverride = + 1. Range 0 to 1999mV. 0: 0mV +**/ + UINT16 MinVoltageC8; + +/** Offset 0x04F6 - Reserved +**/ + UINT8 Reserved25[8]; + +/** Offset 0x04FE - Enable Power Optimizer + Enable DMI Power Optimizer on PCH side. $EN_DIS **/ - UINT8 PchUnlockGpioPads; + UINT8 PchPwrOptEnable; + +/** Offset 0x04FF - PCH Flash Protection Ranges Write Enble + Write or erase is blocked by hardware. +**/ + UINT8 PchWriteProtectionEnable[5]; + +/** Offset 0x0504 - PCH Flash Protection Ranges Read Enble + Read is blocked by hardware. +**/ + UINT8 PchReadProtectionEnable[5]; + +/** Offset 0x0509 - Reserved +**/ + UINT8 Reserved26; + +/** Offset 0x050A - PCH Protect Range Limit + Left shifted address by 12 bits with address bits 11:0 are assumed to be FFFh for + limit comparison. +**/ + UINT16 PchProtectedRangeLimit[5]; + +/** Offset 0x0514 - PCH Protect Range Base + Left shifted address by 12 bits with address bits 11:0 are assumed to be 0. +**/ + UINT16 PchProtectedRangeBase[5]; + +/** Offset 0x051E - Enable Pme + Enable Azalia wake-on-ring. + $EN_DIS +**/ + UINT8 PchHdaPme; + +/** Offset 0x051F - HD Audio Link Frequency + HDA Link Freq (PCH_HDAUDIO_LINK_FREQUENCY enum): 0: 6MHz, 1: 12MHz, 2: 24MHz. + 0: 6MHz, 1: 12MHz, 2: 24MHz +**/ + UINT8 PchHdaLinkFrequency; + +/** Offset 0x0520 - Enable PCH Io Apic Entry 24-119 + 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 PchIoApicEntry24_119; + +/** Offset 0x0521 - PCH Io Apic ID + This member determines IOAPIC ID. Default is 0x02. +**/ + UINT8 PchIoApicId; + +/** Offset 0x0522 - Enable PCH Lan LTR capabilty of PCH internal LAN + 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 PchLanLtrEnable; + +/** Offset 0x0523 - Enable LOCKDOWN BIOS LOCK + Enable the BIOS Lock feature and set EISS bit (D31:F5:RegDCh[5]) for the BIOS region + protection. + $EN_DIS +**/ + UINT8 PchLockDownBiosLock; + +/** Offset 0x0524 - PCH Compatibility Revision ID + This member describes whether or not the CRID feature of PCH should be enabled. + $EN_DIS +**/ + UINT8 PchCrid; + +/** Offset 0x0525 - Reserved +**/ + UINT8 Reserved27; + +/** Offset 0x0526 - RTC Cmos Memory Lock + Enable RTC lower and upper 128 byte Lock bits to lock Bytes 38h-3Fh in the upper + and and lower 128-byte bank of RTC RAM. + $EN_DIS +**/ + UINT8 RtcMemoryLock; + +/** Offset 0x0527 - Enable PCIE RP HotPlug + Indicate whether the root port is hot plug available. +**/ + UINT8 PcieRpHotPlug[24]; + +/** Offset 0x053F - Enable PCIE RP Pm Sci + Indicate whether the root port power manager SCI is enabled. +**/ + UINT8 PcieRpPmSci[24]; + +/** Offset 0x0557 - Enable PCIE RP Transmitter Half Swing + Indicate whether the Transmitter Half Swing is enabled. +**/ + UINT8 PcieRpTransmitterHalfSwing[24]; + +/** Offset 0x056F - Enable PCIE RP Clk Req Detect + Probe CLKREQ# signal before enabling CLKREQ# based power management. +**/ + UINT8 PcieRpClkReqDetect[24]; + +/** Offset 0x0587 - PCIE RP Advanced Error Report + Indicate whether the Advanced Error Reporting is enabled. +**/ + UINT8 PcieRpAdvancedErrorReporting[24]; + +/** Offset 0x059F - PCIE RP Unsupported Request Report + Indicate whether the Unsupported Request Report is enabled. +**/ + UINT8 PcieRpUnsupportedRequestReport[24]; + +/** Offset 0x05B7 - PCIE RP Fatal Error Report + Indicate whether the Fatal Error Report is enabled. +**/ + UINT8 PcieRpFatalErrorReport[24]; + +/** Offset 0x05CF - PCIE RP No Fatal Error Report + Indicate whether the No Fatal Error Report is enabled. +**/ + UINT8 PcieRpNoFatalErrorReport[24]; + +/** Offset 0x05E7 - PCIE RP Correctable Error Report + Indicate whether the Correctable Error Report is enabled. +**/ + UINT8 PcieRpCorrectableErrorReport[24]; + +/** Offset 0x05FF - PCIE RP System Error On Fatal Error + Indicate whether the System Error on Fatal Error is enabled. +**/ + UINT8 PcieRpSystemErrorOnFatalError[24]; + +/** Offset 0x0617 - PCIE RP System Error On Non Fatal Error + Indicate whether the System Error on Non Fatal Error is enabled. +**/ + UINT8 PcieRpSystemErrorOnNonFatalError[24]; + +/** Offset 0x062F - PCIE RP System Error On Correctable Error + Indicate whether the System Error on Correctable Error is enabled. +**/ + UINT8 PcieRpSystemErrorOnCorrectableError[24]; + +/** Offset 0x0647 - PCIE RP Max Payload + Max Payload Size supported, Default 128B, see enum PCH_PCIE_MAX_PAYLOAD. +**/ + UINT8 PcieRpMaxPayload[24]; + +/** Offset 0x065F - Reserved +**/ + UINT8 Reserved28[13]; + +/** Offset 0x066C - PCIE RP Pcie Speed + Determines each PCIE Port speed capability. 0: Auto; 1: Gen1; 2: Gen2; 3: Gen3 (see: + PCIE_SPEED). +**/ + UINT8 PcieRpPcieSpeed[24]; + +/** Offset 0x0684 - PCIE RP Physical Slot Number + Indicates the slot number for the root port. Default is the value as root port index. +**/ + UINT8 PcieRpPhysicalSlotNumber[24]; + +/** Offset 0x069C - PCIE RP Completion Timeout + The root port completion timeout(see: PCIE_COMPLETION_TIMEOUT). Default is PcieCompletionTO_Default. +**/ + UINT8 PcieRpCompletionTimeout[24]; + +/** Offset 0x06B4 - PCIE RP Aspm + The ASPM configuration of the root port (see: PCH_PCIE_ASPM_CONTROL). Default is + PchPcieAspmAutoConfig. +**/ + UINT8 PcieRpAspm[24]; + +/** Offset 0x06CC - PCIE RP L1 Substates + The L1 Substates configuration of the root port (see: PCH_PCIE_L1SUBSTATES_CONTROL). + Default is PchPcieL1SubstatesL1_1_2. +**/ + UINT8 PcieRpL1Substates[24]; + +/** Offset 0x06E4 - PCIE RP Ltr Enable + Latency Tolerance Reporting Mechanism. +**/ + UINT8 PcieRpLtrEnable[24]; + +/** Offset 0x06FC - PCIE RP Ltr Config Lock + 0: Disable; 1: Enable. +**/ + UINT8 PcieRpLtrConfigLock[24]; + +/** Offset 0x0714 - Reserved +**/ + UINT8 Reserved29[44]; + +/** Offset 0x0740 - PCIE Enable Peer Memory Write + This member describes whether Peer Memory Writes are enabled on the platform. + $EN_DIS +**/ + UINT8 PcieEnablePeerMemoryWrite; + +/** Offset 0x0741 - PCIE Compliance Test Mode + Compliance Test Mode shall be enabled when using Compliance Load Board. + $EN_DIS +**/ + UINT8 PcieComplianceTestMode; + +/** Offset 0x0742 - PCIE Rp Function Swap + Allows BIOS to use root port function number swapping when root port of function + 0 is disabled. + $EN_DIS +**/ + UINT8 PcieRpFunctionSwap; + +/** Offset 0x0743 - Reserved +**/ + UINT8 Reserved30[2]; + +/** Offset 0x0745 - PCH Pm PME_B0_S5_DIS + When cleared (default), wake events from PME_B0_STS are allowed in S5 if PME_B0_EN = 1. + $EN_DIS +**/ + UINT8 PchPmPmeB0S5Dis; + +/** Offset 0x0746 - PCIE IMR + Enables Isolated Memory Region for PCIe. + $EN_DIS +**/ + UINT8 PcieRpImrEnabled; + +/** Offset 0x0747 - PCIE IMR port number + Selects PCIE root port number for IMR feature. +**/ + UINT8 PcieRpImrSelection; + +/** Offset 0x0748 - PCH Pm Wol Enable Override + Corresponds to the WOL Enable Override bit in the General PM Configuration B (GEN_PMCON_B) register. + $EN_DIS +**/ + UINT8 PchPmWolEnableOverride; + +/** Offset 0x0749 - PCH Pm Pcie Wake From DeepSx + Determine if enable PCIe to wake from deep Sx. + $EN_DIS +**/ + UINT8 PchPmPcieWakeFromDeepSx; + +/** Offset 0x074A - PCH Pm WoW lan Enable + Determine if WLAN wake from Sx, corresponds to the HOST_WLAN_PP_EN bit in the PWRM_CFG3 register. + $EN_DIS +**/ + UINT8 PchPmWoWlanEnable; + +/** Offset 0x074B - PCH Pm WoW lan DeepSx Enable + Determine if WLAN wake from DeepSx, corresponds to the DSX_WLAN_PP_EN bit in the + PWRM_CFG3 register. + $EN_DIS +**/ + UINT8 PchPmWoWlanDeepSxEnable; + +/** Offset 0x074C - PCH Pm Lan Wake From DeepSx + Determine if enable LAN to wake from deep Sx. + $EN_DIS +**/ + UINT8 PchPmLanWakeFromDeepSx; + +/** Offset 0x074D - PCH Pm Deep Sx Pol + Deep Sx Policy. + $EN_DIS +**/ + UINT8 PchPmDeepSxPol; + +/** Offset 0x074E - PCH Pm Slp S3 Min Assert + SLP_S3 Minimum Assertion Width Policy. Default is PchSlpS350ms. +**/ + UINT8 PchPmSlpS3MinAssert; + +/** Offset 0x074F - PCH Pm Slp S4 Min Assert + SLP_S4 Minimum Assertion Width Policy. Default is PchSlpS44s. +**/ + UINT8 PchPmSlpS4MinAssert; + +/** Offset 0x0750 - PCH Pm Slp Sus Min Assert + SLP_SUS Minimum Assertion Width Policy. Default is PchSlpSus4s. +**/ + UINT8 PchPmSlpSusMinAssert; + +/** Offset 0x0751 - PCH Pm Slp A Min Assert + SLP_A Minimum Assertion Width Policy. Default is PchSlpA2s. +**/ + UINT8 PchPmSlpAMinAssert; + +/** Offset 0x0752 - USB Overcurrent Override for DbC + This option overrides USB Over Current enablement state that USB OC will be disabled + after enabling this option. Enable when DbC is used to avoid signaling conflicts. + $EN_DIS +**/ + UINT8 PchEnableDbcObs; + +/** Offset 0x0753 - PCH Pm Slp Strch Sus Up + Enable SLP_X Stretching After SUS Well Power Up. + $EN_DIS +**/ + UINT8 PchPmSlpStrchSusUp; + +/** Offset 0x0754 - PCH Pm Slp Lan Low Dc + Enable/Disable SLP_LAN# Low on DC Power. + $EN_DIS +**/ + UINT8 PchPmSlpLanLowDc; + +/** Offset 0x0755 - PCH Pm Pwr Btn Override Period + PCH power button override period. 000b-4s, 001b-6s, 010b-8s, 011b-10s, 100b-12s, 101b-14s. +**/ + UINT8 PchPmPwrBtnOverridePeriod; + +/** Offset 0x0756 - PCH Pm Disable Dsx Ac Present Pulldown + When Disable, PCH will internal pull down AC_PRESENT in deep SX and during G3 exit. + $EN_DIS +**/ + UINT8 PchPmDisableDsxAcPresentPulldown; + +/** Offset 0x0757 - PCH Pm Disable Native Power Button + Power button native mode disable. + $EN_DIS +**/ + UINT8 PchPmDisableNativePowerButton; + +/** Offset 0x0758 - PCH Pm ME_WAKE_STS + Clear the ME_WAKE_STS bit in the Power and Reset Status (PRSTS) register. + $EN_DIS +**/ + UINT8 PchPmMeWakeSts; + +/** Offset 0x0759 - PCH Pm WOL_OVR_WK_STS + Clear the WOL_OVR_WK_STS bit in the Power and Reset Status (PRSTS) register. + $EN_DIS +**/ + UINT8 PchPmWolOvrWkSts; + +/** Offset 0x075A - PCH Pm Reset Power Cycle Duration + Could be customized in the unit of second. Please refer to EDS for all support settings. + 0 is default, 1 is 1 second, 2 is 2 seconds, ... +**/ + UINT8 PchPmPwrCycDur; + +/** Offset 0x075B - PCH Pm Pcie Pll Ssc + Specifies the Pcie Pll Spread Spectrum Percentage. The default is 0xFF: AUTO - No + BIOS override. +**/ + UINT8 PchPmPciePllSsc; + +/** Offset 0x075C - PCH Legacy IO Low Latency Enable + Set to enable low latency of legacy IO. 0: Disable, 1: Enable + $EN_DIS +**/ + UINT8 PchLegacyIoLowLatency; + +/** Offset 0x075D - PCH Sata Pwr Opt Enable + SATA Power Optimizer on PCH side. + $EN_DIS +**/ + UINT8 SataPwrOptEnable; + +/** Offset 0x075E - PCH Sata eSATA Speed Limit + When enabled, BIOS will configure the PxSCTL.SPD to 2 to limit the eSATA port speed. + $EN_DIS +**/ + UINT8 EsataSpeedLimit; + +/** Offset 0x075F - PCH Sata Speed Limit + Indicates the maximum speed the SATA controller can support 0h: PchSataSpeedDefault. +**/ + UINT8 SataSpeedLimit; + +/** Offset 0x0760 - Enable SATA Port HotPlug + Enable SATA Port HotPlug. +**/ + UINT8 SataPortsHotPlug[8]; + +/** Offset 0x0768 - Enable SATA Port Interlock Sw + Enable SATA Port Interlock Sw. +**/ + UINT8 SataPortsInterlockSw[8]; + +/** Offset 0x0770 - Enable SATA Port External + Enable SATA Port External. +**/ + UINT8 SataPortsExternal[8]; + +/** Offset 0x0778 - Enable SATA Port SpinUp + Enable the COMRESET initialization Sequence to the device. +**/ + UINT8 SataPortsSpinUp[8]; + +/** Offset 0x0780 - Enable SATA Port Solid State Drive + 0: HDD; 1: SSD. +**/ + UINT8 SataPortsSolidStateDrive[8]; + +/** Offset 0x0788 - Enable SATA Port Enable Dito Config + Enable DEVSLP Idle Timeout settings (DmVal, DitoVal). +**/ + UINT8 SataPortsEnableDitoConfig[8]; + +/** Offset 0x0790 - Enable SATA Port DmVal + DITO multiplier. Default is 15. +**/ + UINT8 SataPortsDmVal[8]; + +/** Offset 0x0798 - Enable SATA Port DmVal + DEVSLP Idle Timeout (DITO), Default is 625. +**/ + UINT16 SataPortsDitoVal[8]; + +/** Offset 0x07A8 - Enable SATA Port ZpOdd + Support zero power ODD. +**/ + UINT8 SataPortsZpOdd[8]; + +/** Offset 0x07B0 - PCH Sata Rst Raid Alternate Id + Enable RAID Alternate ID. + $EN_DIS +**/ + UINT8 SataRstRaidDeviceId; + +/** Offset 0x07B1 - PCH Sata Rst Raid0 + RAID0. + $EN_DIS +**/ + UINT8 SataRstRaid0; + +/** Offset 0x07B2 - PCH Sata Rst Raid1 + RAID1. + $EN_DIS +**/ + UINT8 SataRstRaid1; + +/** Offset 0x07B3 - PCH Sata Rst Raid10 + RAID10. + $EN_DIS +**/ + UINT8 SataRstRaid10; + +/** Offset 0x07B4 - PCH Sata Rst Raid5 + RAID5. + $EN_DIS +**/ + UINT8 SataRstRaid5; + +/** Offset 0x07B5 - PCH Sata Rst Irrt + Intel Rapid Recovery Technology. + $EN_DIS +**/ + UINT8 SataRstIrrt; + +/** Offset 0x07B6 - PCH Sata Rst Orom Ui Banner + OROM UI and BANNER. + $EN_DIS +**/ + UINT8 SataRstOromUiBanner; + +/** Offset 0x07B7 - PCH Sata Rst Orom Ui Delay + 00b: 2 secs; 01b: 4 secs; 10b: 6 secs; 11: 8 secs (see: PCH_SATA_OROM_DELAY). +**/ + UINT8 SataRstOromUiDelay; + +/** Offset 0x07B8 - PCH Sata Rst Hdd Unlock + Indicates that the HDD password unlock in the OS is enabled. + $EN_DIS +**/ + UINT8 SataRstHddUnlock; + +/** Offset 0x07B9 - PCH Sata Rst Led Locate + Indicates that the LED/SGPIO hardware is attached and ping to locate feature is + enabled on the OS. + $EN_DIS +**/ + UINT8 SataRstLedLocate; + +/** Offset 0x07BA - PCH Sata Rst Irrt Only + Allow only IRRT drives to span internal and external ports. + $EN_DIS +**/ + UINT8 SataRstIrrtOnly; + +/** Offset 0x07BB - PCH Sata Rst Smart Storage + RST Smart Storage caching Bit. + $EN_DIS +**/ + UINT8 SataRstSmartStorage; + +/** Offset 0x07BC - PCH Sata Rst Pcie Storage Remap enable + Enable Intel RST for PCIe Storage remapping. +**/ + UINT8 SataRstPcieEnable[3]; + +/** Offset 0x07BF - PCH Sata Rst Pcie Storage Port + Intel RST for PCIe Storage remapping - PCIe Port Selection (1-based, 0 = autodetect). +**/ + UINT8 SataRstPcieStoragePort[3]; + +/** Offset 0x07C2 - PCH Sata Rst Pcie Device Reset Delay + PCIe Storage Device Reset Delay in milliseconds. Default value is 100ms +**/ + UINT8 SataRstPcieDeviceResetDelay[3]; + +/** Offset 0x07C5 - UFS enable/disable + PCIe Storage Device Reset Delay in milliseconds. Default value is 100ms + $EN_DIS +**/ + UINT8 UfsEnable[2]; + +/** Offset 0x07C7 - Reserved +**/ + UINT8 Reserved31; + +/** Offset 0x07C8 - Thermal Throttling Custimized T0Level Value + Custimized T0Level value. +**/ + UINT16 PchT0Level; + +/** Offset 0x07CA - Thermal Throttling Custimized T1Level Value + Custimized T1Level value. +**/ + UINT16 PchT1Level; + +/** Offset 0x07CC - Thermal Throttling Custimized T2Level Value + Custimized T2Level value. +**/ + UINT16 PchT2Level; + +/** Offset 0x07CE - Enable The Thermal Throttle + Enable the thermal throttle function. + $EN_DIS +**/ + UINT8 PchTTEnable; + +/** Offset 0x07CF - PMSync State 13 + When set to 1 and the programmed GPIO pin is a 1, then PMSync state 13 will force + at least T2 state. + $EN_DIS +**/ + UINT8 PchTTState13Enable; + +/** Offset 0x07D0 - Thermal Throttle Lock + Thermal Throttle Lock. + $EN_DIS +**/ + UINT8 PchTTLock; + +/** Offset 0x07D1 - Thermal Throttling Suggested Setting + Thermal Throttling Suggested Setting. + $EN_DIS +**/ + UINT8 TTSuggestedSetting; + +/** Offset 0x07D2 - Enable PCH Cross Throttling + Enable/Disable PCH Cross Throttling + $EN_DIS +**/ + UINT8 TTCrossThrottling; + +/** Offset 0x07D3 - DMI Thermal Sensor Autonomous Width Enable + DMI Thermal Sensor Autonomous Width Enable. + $EN_DIS +**/ + UINT8 PchDmiTsawEn; + +/** Offset 0x07D4 - DMI Thermal Sensor Suggested Setting + DMT thermal sensor suggested representative values. + $EN_DIS +**/ + UINT8 DmiSuggestedSetting; + +/** Offset 0x07D5 - Thermal Sensor 0 Target Width + Thermal Sensor 0 Target Width. + 0:x1, 1:x2, 2:x4, 3:x8, 4:x16 +**/ + UINT8 DmiTS0TW; + +/** Offset 0x07D6 - Thermal Sensor 1 Target Width + Thermal Sensor 1 Target Width. + 0:x1, 1:x2, 2:x4, 3:x8, 4:x16 +**/ + UINT8 DmiTS1TW; + +/** Offset 0x07D7 - Thermal Sensor 2 Target Width + Thermal Sensor 2 Target Width. + 0:x1, 1:x2, 2:x4, 3:x8, 4:x16 +**/ + UINT8 DmiTS2TW; + +/** Offset 0x07D8 - Thermal Sensor 3 Target Width + Thermal Sensor 3 Target Width. + 0:x1, 1:x2, 2:x4, 3:x8, 4:x16 +**/ + UINT8 DmiTS3TW; + +/** Offset 0x07D9 - Port 0 T1 Multipler + Port 0 T1 Multipler. +**/ + UINT8 SataP0T1M; + +/** Offset 0x07DA - Port 0 T2 Multipler + Port 0 T2 Multipler. +**/ + UINT8 SataP0T2M; + +/** Offset 0x07DB - Port 0 T3 Multipler + Port 0 T3 Multipler. +**/ + UINT8 SataP0T3M; + +/** Offset 0x07DC - Port 0 Tdispatch + Port 0 Tdispatch. +**/ + UINT8 SataP0TDisp; + +/** Offset 0x07DD - Port 1 T1 Multipler + Port 1 T1 Multipler. +**/ + UINT8 SataP1T1M; + +/** Offset 0x07DE - Port 1 T2 Multipler + Port 1 T2 Multipler. +**/ + UINT8 SataP1T2M; + +/** Offset 0x07DF - Port 1 T3 Multipler + Port 1 T3 Multipler. +**/ + UINT8 SataP1T3M; + +/** Offset 0x07E0 - Port 1 Tdispatch + Port 1 Tdispatch. +**/ + UINT8 SataP1TDisp; + +/** Offset 0x07E1 - Port 0 Tinactive + Port 0 Tinactive. +**/ + UINT8 SataP0Tinact; + +/** Offset 0x07E2 - Port 0 Alternate Fast Init Tdispatch + Port 0 Alternate Fast Init Tdispatch. + $EN_DIS +**/ + UINT8 SataP0TDispFinit; + +/** Offset 0x07E3 - Port 1 Tinactive + Port 1 Tinactive. +**/ + UINT8 SataP1Tinact; + +/** Offset 0x07E4 - Port 1 Alternate Fast Init Tdispatch + Port 1 Alternate Fast Init Tdispatch. + $EN_DIS +**/ + UINT8 SataP1TDispFinit; + +/** Offset 0x07E5 - Sata Thermal Throttling Suggested Setting + Sata Thermal Throttling Suggested Setting. + $EN_DIS +**/ + UINT8 SataThermalSuggestedSetting; + +/** Offset 0x07E6 - Enable Memory Thermal Throttling + Enable Memory Thermal Throttling. + $EN_DIS +**/ + UINT8 PchMemoryThrottlingEnable; + +/** Offset 0x07E7 - Memory Thermal Throttling + Enable Memory Thermal Throttling. +**/ + UINT8 PchMemoryPmsyncEnable[2]; + +/** Offset 0x07E9 - Enable Memory Thermal Throttling + Enable Memory Thermal Throttling. +**/ + UINT8 PchMemoryC0TransmitEnable[2]; + +/** Offset 0x07EB - Enable Memory Thermal Throttling + Enable Memory Thermal Throttling. +**/ + UINT8 PchMemoryPinSelection[2]; + +/** Offset 0x07ED - Reserved +**/ + UINT8 Reserved32; + +/** Offset 0x07EE - Thermal Device Temperature + Decides the temperature. +**/ + UINT16 PchTemperatureHotLevel; + +/** Offset 0x07F0 - USB2 Port Over Current Pin + Describe the specific over current pin number of USB 2.0 Port N. +**/ + UINT8 Usb2OverCurrentPin[16]; + +/** Offset 0x0800 - USB3 Port Over Current Pin + Describe the specific over current pin number of USB 3.0 Port N. +**/ + UINT8 Usb3OverCurrentPin[10]; + +/** Offset 0x080A - Enable 8254 Static Clock Gating + Set 8254CGE=1 is required for SLP_S0 support. However, set 8254CGE=1 in POST time + might fail to boot legacy OS using 8254 timer. Make sure it is disabled to support + legacy OS using 8254 timer. Also enable this while S0ix is enabled. + $EN_DIS +**/ + UINT8 Enable8254ClockGating; + +/** Offset 0x080B - Enable 8254 Static Clock Gating On S3 + This is only applicable when Enable8254ClockGating is disabled. FSP will do the + 8254 CGE programming on S3 resume when Enable8254ClockGatingOnS3 is enabled. This + avoids the SMI requirement for the programming. + $EN_DIS +**/ + UINT8 Enable8254ClockGatingOnS3; + +/** Offset 0x080C - PCH Sata Rst Optane Memory + Optane Memory + $EN_DIS +**/ + UINT8 SataRstOptaneMemory; + +/** Offset 0x080D - PCH Sata Rst CPU Attached Storage + CPU Attached Storage + $EN_DIS +**/ + UINT8 SataRstCpuAttachedStorage; + +/** Offset 0x080E - Enable TCO timer. + When FALSE, it disables PCH ACPI timer, and stops TCO timer. NOTE: This will have + huge power impact when it's enabled. If TCO timer is disabled, uCode ACPI timer + emulation must be enabled, and WDAT table must not be exposed to the OS. + $EN_DIS +**/ + UINT8 EnableTcoTimer; + +/** Offset 0x080F - Reserved +**/ + UINT8 Reserved33; + +/** Offset 0x0810 - BgpdtHash[4] + BgpdtHash values +**/ + UINT64 BgpdtHash[4]; + +/** Offset 0x0830 - BiosGuardAttr + BiosGuardAttr default values +**/ + UINT32 BiosGuardAttr; + +/** Offset 0x0834 - Reserved +**/ + UINT8 Reserved34[4]; + +/** Offset 0x0838 - BiosGuardModulePtr + BiosGuardModulePtr default values +**/ + UINT64 BiosGuardModulePtr; + +/** Offset 0x0840 - SendEcCmd + SendEcCmd function pointer. \n + @code typedef EFI_STATUS (EFIAPI *PLATFORM_SEND_EC_COMMAND) (IN EC_COMMAND_TYPE + EcCmdType, IN UINT8 EcCmd, IN UINT8 SendData, IN OUT UINT8 *ReceiveData); @endcode +**/ + UINT64 SendEcCmd; + +/** Offset 0x0848 - EcCmdProvisionEav + Ephemeral Authorization Value default values. Provisions an ephemeral shared secret to the EC +**/ + UINT8 EcCmdProvisionEav; + +/** Offset 0x0849 - EcCmdLock + EcCmdLock default values. Locks Ephemeral Authorization Value sent previously +**/ + UINT8 EcCmdLock; + +/** Offset 0x084A - Reserved +**/ + UINT8 Reserved35[6]; + +/** Offset 0x0850 - SVID SDID table Poniter. + The address of the table of SVID SDID to customize each SVID SDID entry. This is + only valid when SkipSsidProgramming is FALSE. +**/ + UINT32 SiSsidTablePtr; + +/** Offset 0x0854 - Number of ssid table. + SiNumberOfSsidTableEntry should match the table entries created in SiSsidTablePtr. + This is only valid when SkipSsidProgramming is FALSE. +**/ + UINT16 SiNumberOfSsidTableEntry; + +/** Offset 0x0856 - Reserved +**/ + UINT8 Reserved36[16]; + +/** Offset 0x0866 - SATA RST Interrupt Mode + Allowes to choose which interrupts will be implemented by SATA controller in RAID mode. + 0:Msix, 1:Msi, 2:Legacy +**/ + UINT8 SataRstInterrupt; + +/** Offset 0x0867 - ME Unconfig on RTC clear + 0: Disable ME Unconfig On Rtc Clear. 1: Enable ME Unconfig On Rtc Clear. + 2: Cmos is clear, status unkonwn. 3: Reserved + 0: Disable ME Unconfig On Rtc Clear, 1: Enable ME Unconfig On Rtc Clear, 2: Cmos + is clear, 3: Reserved +**/ + UINT8 MeUnconfigOnRtcClear; + +/** Offset 0x0868 - Enable PS_ON. + PS_ON is a new C10 state from the CPU on desktop SKUs that enables a lower power + target that will be required by the California Energy Commission (CEC). When FALSE, + PS_ON is to be disabled. + $EN_DIS +**/ + UINT8 PsOnEnable; + +/** Offset 0x0869 - Pmc Cpu C10 Gate Pin Enable + Enable/Disable platform support for CPU_C10_GATE# pin to control gating of CPU VccIO + and VccSTG rails instead of SLP_S0# pin. + $EN_DIS +**/ + UINT8 PmcCpuC10GatePinEnable; + +/** Offset 0x086A - Pch Dmi Aspm Ctrl + ASPM configuration on the PCH side of the DMI/OPI Link. Default is PchPcieAspmAutoConfig + 0:Disabled, 1:L0s, 2:L1, 3:L0sL1, 4:Auto +**/ + UINT8 PchDmiAspmCtrl; + +/** Offset 0x086B - PchDmiCwbEnable + Central Write Buffer feature configurable and disabled by default + $EN_DIS +**/ + UINT8 PchDmiCwbEnable; + +/** Offset 0x086C - OS IDLE Mode Enable + Enable/Disable OS Idle Mode + $EN_DIS +**/ + UINT8 PmcOsIdleEnable; + +/** Offset 0x086D - Reserved +**/ + UINT8 Reserved37[307]; + +/** Offset 0x09A0 - Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 3 + Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 3, Each + value in array can be between 0-1. One byte for each port. +**/ + UINT8 Usb3HsioTxRate3UniqTranEnable[10]; + +/** Offset 0x09AA - USB 3.0 TX Output Unique Transition Bit Scale for rate 3 + USB 3.0 TX Output Unique Transition Bit Scale for rate 3, HSIO_TX_DWORD9[6:0], Default + = 4Ch. One byte for each port. +**/ + UINT8 Usb3HsioTxRate3UniqTran[10]; + +/** Offset 0x09B4 - Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 2 + Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 2, Each + value in array can be between 0-1. One byte for each port. +**/ + UINT8 Usb3HsioTxRate2UniqTranEnable[10]; + +/** Offset 0x09BE - USB 3.0 TX Output Unique Transition Bit Scale for rate 2 + USB 3.0 TX Output Unique Transition Bit Scale for rate 2, HSIO_TX_DWORD9[14:8], + Default = 4Ch. One byte for each port. +**/ + UINT8 Usb3HsioTxRate2UniqTran[10]; + +/** Offset 0x09C8 - Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 1 + Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 1, Each + value in array can be between 0-1. One byte for each port. +**/ + UINT8 Usb3HsioTxRate1UniqTranEnable[10]; + +/** Offset 0x09D2 - USB 3.0 TX Output Unique Transition Bit Scale for rate 1 + USB 3.0 TX Output Unique Transition Bit Scale for rate 1, HSIO_TX_DWORD9[22:16], + Default = 4Ch. One byte for each port. +**/ + UINT8 Usb3HsioTxRate1UniqTran[10]; + +/** Offset 0x09DC - Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 0 + Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 0, Each + value in array can be between 0-1. One byte for each port. +**/ + UINT8 Usb3HsioTxRate0UniqTranEnable[10]; + +/** Offset 0x09E6 - USB 3.0 TX Output Unique Transition Bit Scale for rate 0 + USB 3.0 TX Output Unique Transition Bit Scale for rate 0, HSIO_TX_DWORD9[30:24], + Default = 4Ch. One byte for each port. +**/ + UINT8 Usb3HsioTxRate0UniqTran[10]; + +/** Offset 0x09F0 - Skip PAM regsiter lock + Enable: PAM register will not be locked by RC, platform code should lock it, Disable(Default): + PAM registers will be locked by RC + $EN_DIS +**/ + UINT8 SkipPamLock; + +/** Offset 0x09F1 - EDRAM Test Mode + Enable: PAM register will not be locked by RC, platform code should lock it, Disable(Default): + PAM registers will be locked by RC + 0: EDRAM SW disable, 1: EDRAM SW Enable, 2: EDRAM HW mode +**/ + UINT8 EdramTestMode; + +/** Offset 0x09F2 - Enable/Disable IGFX RenderStandby + Enable(Default): Enable IGFX RenderStandby, Disable: Disable IGFX RenderStandby + $EN_DIS +**/ + UINT8 RenderStandby; + +/** Offset 0x09F3 - Enable/Disable IGFX PmSupport + Enable(Default): Enable IGFX PmSupport, Disable: Disable IGFX PmSupport + $EN_DIS +**/ + UINT8 PmSupport; + +/** Offset 0x09F4 - Enable/Disable CdynmaxClamp + Enable: Enable CdynmaxClamp, Disable(Default): Disable CdynmaxClamp + $EN_DIS +**/ + UINT8 CdynmaxClampEnable; + +/** Offset 0x09F5 - GT Frequency Limit + 0xFF: Auto(Default), 2: 100 Mhz, 3: 150 Mhz, 4: 200 Mhz, 5: 250 Mhz, 6: 300 Mhz, + 7: 350 Mhz, 8: 400 Mhz, 9: 450 Mhz, 0xA: 500 Mhz, 0xB: 550 Mhz, 0xC: 600 Mhz, 0xD: + 650 Mhz, 0xE: 700 Mhz, 0xF: 750 Mhz, 0x10: 800 Mhz, 0x11: 850 Mhz, 0x12:900 Mhz, + 0x13: 950 Mhz, 0x14: 1000 Mhz, 0x15: 1050 Mhz, 0x16: 1100 Mhz, 0x17: 1150 Mhz, + 0x18: 1200 Mhz + 0xFF: Auto(Default), 2: 100 Mhz, 3: 150 Mhz, 4: 200 Mhz, 5: 250 Mhz, 6: 300 Mhz, + 7: 350 Mhz, 8: 400 Mhz, 9: 450 Mhz, 0xA: 500 Mhz, 0xB: 550 Mhz, 0xC: 600 Mhz, 0xD: + 650 Mhz, 0xE: 700 Mhz, 0xF: 750 Mhz, 0x10: 800 Mhz, 0x11: 850 Mhz, 0x12:900 Mhz, + 0x13: 950 Mhz, 0x14: 1000 Mhz, 0x15: 1050 Mhz, 0x16: 1100 Mhz, 0x17: 1150 Mhz, + 0x18: 1200 Mhz +**/ + UINT8 GtFreqMax; + +/** Offset 0x09F6 - Disable Turbo GT + 0=Disable: GT frequency is not limited, 1=Enable: Disables Turbo GT frequency + $EN_DIS +**/ + UINT8 DisableTurboGt; + +/** Offset 0x09F7 - Enable/Disable CdClock Init + Enable: Skip Full CD clock initializaton, Disable(Default): Initialize the full + CD clock if not initialized by Gfx PEIM + $EN_DIS +**/ + UINT8 SkipCdClockInit; + +/** Offset 0x09F8 - Reserved +**/ + UINT8 Reserved38[15]; + +/** Offset 0x0A07 - 1-Core Ratio Limit + 1-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused + 1-Core Ratio Limit + OC Bins.This 1-Core Ratio Limit Must be greater than or equal + to 2-Core Ratio Limit, 3-Core Ratio Limit, 4-Core Ratio Limit. Range is 0 to 83 +**/ + UINT8 OneCoreRatioLimit; + +/** Offset 0x0A08 - 2-Core Ratio Limit + 2-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused + 2-Core Ratio Limit + OC Bins.This 2-Core Ratio Limit Must be Less than or equal + to 1-Core Ratio Limit.Range is 0 to 83 +**/ + UINT8 TwoCoreRatioLimit; + +/** Offset 0x0A09 - 3-Core Ratio Limit + 3-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused + 3-Core Ratio Limit + OC Bins.This 3-Core Ratio Limit Must be Less than or equal + to 1-Core Ratio Limit.Range is 0 to 83 +**/ + UINT8 ThreeCoreRatioLimit; + +/** Offset 0x0A0A - 4-Core Ratio Limit + 4-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused + 4-Core Ratio Limit + OC Bins.This 4-Core Ratio Limit Must be Less than or equal + to 1-Core Ratio Limit.Range is 0 to 83 +**/ + UINT8 FourCoreRatioLimit; + +/** Offset 0x0A0B - Enable or Disable HWP + Enable or Disable HWP(Hardware P states) Support. 0: Disable; 1: Enable; + 2-3:Reserved + $EN_DIS +**/ + UINT8 Hwp; + +/** Offset 0x0A0C - Hardware Duty Cycle Control + Hardware Duty Cycle Control configuration. 0: Disabled; 1: Enabled 2-3:Reserved + $EN_DIS +**/ + UINT8 HdcControl; + +/** Offset 0x0A0D - Package Long duration turbo mode time + Package Long duration turbo mode time window in seconds. Valid values(Unit in seconds) + 0 to 8 , 10 , 12 ,14 , 16 , 20 , 24 , 28 , 32 , 40 , 48 , 56 , 64 , 80 , 96 , 112 , 128 +**/ + UINT8 PowerLimit1Time; + +/** Offset 0x0A0E - Short Duration Turbo Mode + Enable or Disable short duration Turbo Mode. 0 : Disable; 1: Enable + $EN_DIS +**/ + UINT8 PowerLimit2; + +/** Offset 0x0A0F - Turbo settings Lock + Lock all Turbo settings Enable/Disable; 0: Disable , 1: Enable + $EN_DIS +**/ + UINT8 TurboPowerLimitLock; + +/** Offset 0x0A10 - Package PL3 time window + Package PL3 time window range for this policy from 0 to 64ms +**/ + UINT8 PowerLimit3Time; + +/** Offset 0x0A11 - Package PL3 Duty Cycle + Package PL3 Duty Cycle; Valid Range is 0 to 100 +**/ + UINT8 PowerLimit3DutyCycle; + +/** Offset 0x0A12 - Package PL3 Lock + Package PL3 Lock Enable/Disable; 0: Disable ; 1:Enable + $EN_DIS +**/ + UINT8 PowerLimit3Lock; + +/** Offset 0x0A13 - Package PL4 Lock + Package PL4 Lock Enable/Disable; 0: Disable ; 1:Enable + $EN_DIS +**/ + UINT8 PowerLimit4Lock; + +/** Offset 0x0A14 - TCC Activation Offset + TCC Activation Offset. Offset from factory set TCC activation temperature at which + the Thermal Control Circuit must be activated. TCC will be activated at TCC Activation + Temperature, in volts.For SKL Y SKU, the recommended default for this policy is + 10, For all other SKUs the recommended default are 0 +**/ + UINT8 TccActivationOffset; + +/** Offset 0x0A15 - Tcc Offset Clamp Enable/Disable + Tcc Offset Clamp for Runtime Average Temperature Limit (RATL) allows CPU to throttle + below P1.For SKL Y SKU, the recommended default for this policy is 1: Enabled, + For all other SKUs the recommended default are 0: Disabled. + $EN_DIS +**/ + UINT8 TccOffsetClamp; + +/** Offset 0x0A16 - Tcc Offset Lock + Tcc Offset Lock for Runtime Average Temperature Limit (RATL) to lock temperature + target; 0: Disabled; 1: Enabled. + $EN_DIS +**/ + UINT8 TccOffsetLock; + +/** Offset 0x0A17 - Custom Ratio State Entries + The number of custom ratio state entries, ranges from 0 to 40 for a valid custom + ratio table.Sets the number of custom P-states. At least 2 states must be present +**/ + UINT8 NumberOfEntries; + +/** Offset 0x0A18 - Custom Short term Power Limit time window + Short term Power Limit time window value for custom CTDP level 1. Valid Range 0 to 128 +**/ + UINT8 Custom1PowerLimit1Time; + +/** Offset 0x0A19 - Custom Turbo Activation Ratio + Turbo Activation Ratio for custom cTDP level 1. Valid Range 0 to 255 +**/ + UINT8 Custom1TurboActivationRatio; + +/** Offset 0x0A1A - Custom Config Tdp Control + Config Tdp Control (0/1/2) value for custom cTDP level 1. Valid Range is 0 to 2 +**/ + UINT8 Custom1ConfigTdpControl; + +/** Offset 0x0A1B - Custom Short term Power Limit time window + Short term Power Limit time window value for custom CTDP level 2. Valid Range 0 to 128 +**/ + UINT8 Custom2PowerLimit1Time; + +/** Offset 0x0A1C - Custom Turbo Activation Ratio + Turbo Activation Ratio for custom cTDP level 2. Valid Range 0 to 255 +**/ + UINT8 Custom2TurboActivationRatio; + +/** Offset 0x0A1D - Custom Config Tdp Control + Config Tdp Control (0/1/2) value for custom cTDP level 1. Valid Range is 0 to 2 +**/ + UINT8 Custom2ConfigTdpControl; + +/** Offset 0x0A1E - Custom Short term Power Limit time window + Short term Power Limit time window value for custom CTDP level 3. Valid Range 0 to 128 +**/ + UINT8 Custom3PowerLimit1Time; + +/** Offset 0x0A1F - Custom Turbo Activation Ratio + Turbo Activation Ratio for custom cTDP level 3. Valid Range 0 to 255 +**/ + UINT8 Custom3TurboActivationRatio; + +/** Offset 0x0A20 - Custom Config Tdp Control + Config Tdp Control (0/1/2) value for custom cTDP level 1. Valid Range is 0 to 2 +**/ + UINT8 Custom3ConfigTdpControl; + +/** Offset 0x0A21 - ConfigTdp mode settings Lock + Lock the ConfigTdp mode settings from runtime changes; 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 ConfigTdpLock; + +/** Offset 0x0A22 - Load Configurable TDP SSDT + Configure whether to load Configurable TDP SSDT; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 ConfigTdpBios; + +/** Offset 0x0A23 - PL1 Enable value + PL1 Enable value to limit average platform power. 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 PsysPowerLimit1; + +/** Offset 0x0A24 - PL1 timewindow + PL1 timewindow in seconds.Valid values(Unit in seconds) 0 to 8 , 10 , 12 ,14 , 16 + , 20 , 24 , 28 , 32 , 40 , 48 , 56 , 64 , 80 , 96 , 112 , 128 +**/ + UINT8 PsysPowerLimit1Time; + +/** Offset 0x0A25 - PL2 Enable Value + PL2 Enable activates the PL2 value to limit average platform power.0: Disable; + 1: Enable. + $EN_DIS +**/ + UINT8 PsysPowerLimit2; + +/** Offset 0x0A26 - Enable or Disable MLC Streamer Prefetcher + Enable or Disable MLC Streamer Prefetcher; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 MlcStreamerPrefetcher; + +/** Offset 0x0A27 - Enable or Disable MLC Spatial Prefetcher + Enable or Disable MLC Spatial Prefetcher; 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 MlcSpatialPrefetcher; + +/** Offset 0x0A28 - Enable or Disable Monitor /MWAIT instructions + Enable or Disable Monitor /MWAIT instructions; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 MonitorMwaitEnable; + +/** Offset 0x0A29 - Enable or Disable initialization of machine check registers + Enable or Disable initialization of machine check registers; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 MachineCheckEnable; + +/** Offset 0x0A2A - AP Idle Manner of waiting for SIPI + AP Idle Manner of waiting for SIPI; 1: HALT loop; 2: MWAIT loop; 3: RUN loop. + 1: HALT loop, 2: MWAIT loop, 3: RUN loop +**/ + UINT8 ApIdleManner; + +/** Offset 0x0A2B - Control on Processor Trace output scheme + Control on Processor Trace output scheme; 0: Single Range Output; 1: ToPA Output. + 0: Single Range Output, 1: ToPA Output +**/ + UINT8 ProcessorTraceOutputScheme; + +/** Offset 0x0A2C - Enable or Disable Processor Trace feature + Enable or Disable Processor Trace feature; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 ProcessorTraceEnable; + +/** Offset 0x0A2D - Enable or Disable Intel SpeedStep Technology + Enable or Disable Intel SpeedStep Technology. 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 Eist; + +/** Offset 0x0A2E - Enable or Disable Energy Efficient P-state + Enable or Disable Energy Efficient P-state will be applied in Turbo mode. Disable; + 1: Enable + $EN_DIS +**/ + UINT8 EnergyEfficientPState; + +/** Offset 0x0A2F - Enable or Disable Energy Efficient Turbo + Enable or Disable Energy Efficient Turbo, will be applied in Turbo mode. Disable; + 1: Enable + $EN_DIS +**/ + UINT8 EnergyEfficientTurbo; + +/** Offset 0x0A30 - Enable or Disable T states + Enable or Disable T states; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 TStates; + +/** Offset 0x0A31 - Enable or Disable Bi-Directional PROCHOT# + Enable or Disable Bi-Directional PROCHOT#; 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 BiProcHot; + +/** Offset 0x0A32 - Enable or Disable PROCHOT# signal being driven externally + Enable or Disable PROCHOT# signal being driven externally; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 DisableProcHotOut; + +/** Offset 0x0A33 - Enable or Disable PROCHOT# Response + Enable or Disable PROCHOT# Response; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 ProcHotResponse; + +/** Offset 0x0A34 - Enable or Disable VR Thermal Alert + Enable or Disable VR Thermal Alert; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 DisableVrThermalAlert; + +/** Offset 0x0A35 - Reserved +**/ + UINT8 Reserved39; + +/** Offset 0x0A36 - Enable or Disable Thermal Monitor + Enable or Disable Thermal Monitor; 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 ThermalMonitor; + +/** Offset 0x0A37 - Enable or Disable CPU power states (C-states) + Enable or Disable CPU power states (C-states). 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 Cx; + +/** Offset 0x0A38 - Configure C-State Configuration Lock + Configure C-State Configuration Lock; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 PmgCstCfgCtrlLock; + +/** Offset 0x0A39 - Enable or Disable Enhanced C-states + Enable or Disable Enhanced C-states. 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 C1e; + +/** Offset 0x0A3A - Enable or Disable Package Cstate Demotion + Enable or Disable Package Cstate Demotion. 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 PkgCStateDemotion; + +/** Offset 0x0A3B - Enable or Disable Package Cstate UnDemotion + Enable or Disable Package Cstate UnDemotion. 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 PkgCStateUnDemotion; + +/** Offset 0x0A3C - Enable or Disable CState-Pre wake + Enable or Disable CState-Pre wake. 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 CStatePreWake; + +/** Offset 0x0A3D - Enable or Disable TimedMwait Support. + Enable or Disable TimedMwait Support. 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 TimedMwait; + +/** Offset 0x0A3E - Enable or Disable IO to MWAIT redirection + Enable or Disable IO to MWAIT redirection; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 CstCfgCtrIoMwaitRedirection; + +/** Offset 0x0A3F - Set the Max Pkg Cstate + Set the Max Pkg Cstate. Default set to Auto which limits the Max Pkg Cstate to deep + C-state. Valid values 0 - C0/C1 , 1 - C2 , 2 - C3 , 3 - C6 , 4 - C7 , 5 - C7S , + 6 - C8 , 7 - C9 , 8 - C10 , 254 - CPU Default , 255 - Auto +**/ + UINT8 PkgCStateLimit; + +/** Offset 0x0A40 - TimeUnit for C-State Latency Control0 + TimeUnit for C-State Latency Control0; Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns + , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns +**/ + UINT8 CstateLatencyControl0TimeUnit; + +/** Offset 0x0A41 - TimeUnit for C-State Latency Control1 + TimeUnit for C-State Latency Control1;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns + , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns +**/ + UINT8 CstateLatencyControl1TimeUnit; + +/** Offset 0x0A42 - TimeUnit for C-State Latency Control2 + TimeUnit for C-State Latency Control2;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns + , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns +**/ + UINT8 CstateLatencyControl2TimeUnit; + +/** Offset 0x0A43 - TimeUnit for C-State Latency Control3 + TimeUnit for C-State Latency Control3;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns + , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns +**/ + UINT8 CstateLatencyControl3TimeUnit; + +/** Offset 0x0A44 - TimeUnit for C-State Latency Control4 + Time - 1ns , 1 - 32ns , 2 - 1024ns , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns +**/ + UINT8 CstateLatencyControl4TimeUnit; + +/** Offset 0x0A45 - TimeUnit for C-State Latency Control5 + TimeUnit for C-State Latency Control5;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns + , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns +**/ + UINT8 CstateLatencyControl5TimeUnit; + +/** Offset 0x0A46 - Interrupt Redirection Mode Select + Interrupt Redirection Mode Select.0: Fixed priority; 1: Round robin;2: Hash vector;7: + No change. +**/ + UINT8 PpmIrmSetting; + +/** Offset 0x0A47 - Lock prochot configuration + Lock prochot configuration Enable/Disable; 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 ProcHotLock; + +/** Offset 0x0A48 - Configuration for boot TDP selection + Configuration for boot TDP selection; 0: TDP Nominal; 1: TDP Down; 2: TDP + Up;0xFF : Deactivate +**/ + UINT8 ConfigTdpLevel; + +/** Offset 0x0A49 - Max P-State Ratio + Max P-State Ratio, Valid Range 0 to 0x7F +**/ + UINT8 MaxRatio; + +/** Offset 0x0A4A - P-state ratios for custom P-state table + P-state ratios for custom P-state table. NumberOfEntries has valid range between + 0 to 40. For no. of P-States supported(NumberOfEntries) , StateRatio[NumberOfEntries] + are configurable. Valid Range of each entry is 0 to 0x7F +**/ + UINT8 StateRatio[40]; + +/** Offset 0x0A72 - P-state ratios for max 16 version of custom P-state table + P-state ratios for max 16 version of custom P-state table. This table is used for + OS versions limited to a max of 16 P-States. If the first entry of this table is + 0, or if Number of Entries is 16 or less, then this table will be ignored, and + up to the top 16 values of the StateRatio table will be used instead. Valid Range + of each entry is 0 to 0x7F +**/ + UINT8 StateRatioMax16[16]; + +/** Offset 0x0A82 - Platform Power Pmax + PCODE MMIO Mailbox: Platform Power Pmax. 0 - Auto Specified in 1/8 Watt increments. + Range 0-1024 Watts. Value of 800 = 100W +**/ + UINT16 PsysPmax; + +/** Offset 0x0A84 - Interrupt Response Time Limit of C-State LatencyContol1 + Interrupt Response Time Limit of C-State LatencyContol1.Range of value 0 to 0x3FF. + 0 is Auto. +**/ + UINT16 CstateLatencyControl1Irtl; + +/** Offset 0x0A86 - Interrupt Response Time Limit of C-State LatencyContol2 + Interrupt Response Time Limit of C-State LatencyContol2.Range of value 0 to 0x3FF. + 0 is Auto. +**/ + UINT16 CstateLatencyControl2Irtl; + +/** Offset 0x0A88 - Interrupt Response Time Limit of C-State LatencyContol3 + Interrupt Response Time Limit of C-State LatencyContol3.Range of value 0 to 0x3FF. + 0 is Auto. +**/ + UINT16 CstateLatencyControl3Irtl; + +/** Offset 0x0A8A - Interrupt Response Time Limit of C-State LatencyContol4 + Interrupt Response Time Limit of C-State LatencyContol4.Range of value 0 to 0x3FF. + 0 is Auto. +**/ + UINT16 CstateLatencyControl4Irtl; + +/** Offset 0x0A8C - Interrupt Response Time Limit of C-State LatencyContol5 + Interrupt Response Time Limit of C-State LatencyContol5.Range of value 0 to 0x3FF. + 0 is Auto. +**/ + UINT16 CstateLatencyControl5Irtl; + +/** Offset 0x0A8E - Reserved +**/ + UINT8 Reserved40[2]; + +/** Offset 0x0A90 - Package Long duration turbo mode power limit + Package Long duration turbo mode power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit. + Valid Range 0 to 4095875 in Step size of 125 +**/ + UINT32 PowerLimit1; + +/** Offset 0x0A94 - Package Short duration turbo mode power limit + Package Short duration turbo mode power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid + Range 0 to 4095875 in Step size of 125 +**/ + UINT32 PowerLimit2Power; + +/** Offset 0x0A98 - Package PL3 power limit + Package PL3 power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid + Range 0 to 4095875 in Step size of 125 +**/ + UINT32 PowerLimit3; + +/** Offset 0x0A9C - Package PL4 power limit + Package PL4 power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid + Range 0 to 4095875 in Step size of 125 +**/ + UINT32 PowerLimit4; + +/** Offset 0x0AA0 - Tcc Offset Time Window for RATL + Package PL4 power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid + Range 0 to 4095875 in Step size of 125 +**/ + UINT32 TccOffsetTimeWindowForRatl; + +/** Offset 0x0AA4 - Short term Power Limit value for custom cTDP level 1 + Short term Power Limit value for custom cTDP level 1. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid + Range 0 to 4095875 in Step size of 125 +**/ + UINT32 Custom1PowerLimit1; + +/** Offset 0x0AA8 - Long term Power Limit value for custom cTDP level 1 + Long term Power Limit value for custom cTDP level 1. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid + Range 0 to 4095875 in Step size of 125 +**/ + UINT32 Custom1PowerLimit2; + +/** Offset 0x0AAC - Short term Power Limit value for custom cTDP level 2 + Short term Power Limit value for custom cTDP level 2. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid + Range 0 to 4095875 in Step size of 125 +**/ + UINT32 Custom2PowerLimit1; + +/** Offset 0x0AB0 - Long term Power Limit value for custom cTDP level 2 + Long term Power Limit value for custom cTDP level 2. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid + Range 0 to 4095875 in Step size of 125 +**/ + UINT32 Custom2PowerLimit2; + +/** Offset 0x0AB4 - Short term Power Limit value for custom cTDP level 3 + Short term Power Limit value for custom cTDP level 3. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid + Range 0 to 4095875 in Step size of 125 +**/ + UINT32 Custom3PowerLimit1; + +/** Offset 0x0AB8 - Long term Power Limit value for custom cTDP level 3 + Long term Power Limit value for custom cTDP level 3. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid + Range 0 to 4095875 in Step size of 125 +**/ + UINT32 Custom3PowerLimit2; + +/** Offset 0x0ABC - Platform PL1 power + Platform PL1 power. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid Range + 0 to 4095875 in Step size of 125 +**/ + UINT32 PsysPowerLimit1Power; + +/** Offset 0x0AC0 - Platform PL2 power + Platform PL2 power. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid Range + 0 to 4095875 in Step size of 125 +**/ + UINT32 PsysPowerLimit2Power; + +/** Offset 0x0AC4 - Race To Halt + Enable/Disable Race To Halt feature. RTH will dynamically increase CPU frequency + in order to enter pkg C-State faster to reduce overall power. (RTH is controlled + through MSR 1FC bit 20)Disable; 1: Enable + $EN_DIS +**/ + UINT8 RaceToHalt; + +/** Offset 0x0AC5 - Set Three Strike Counter Disable + False (default): Three Strike counter will be incremented and True: Prevents Three + Strike counter from incrementing; 0: False; 1: True. + 0: False, 1: True +**/ + UINT8 ThreeStrikeCounterDisable; + +/** Offset 0x0AC6 - Set HW P-State Interrupts Enabled for for MISC_PWR_MGMT + Set HW P-State Interrupts Enabled for for MISC_PWR_MGMT; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 HwpInterruptControl; + +/** Offset 0x0AC7 - 5-Core Ratio Limit + 5-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused + 5-Core Ratio Limit + OC Bins.This 5-Core Ratio Limit Must be Less than or equal + to 1-Core Ratio Limit.Range is 0 to 83 + 0x0:0xFF +**/ + UINT8 FiveCoreRatioLimit; + +/** Offset 0x0AC8 - 6-Core Ratio Limit + 6-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused + 6-Core Ratio Limit + OC Bins.This 6-Core Ratio Limit Must be Less than or equal + to 1-Core Ratio Limit.Range is 0 to 83 + 0x0:0xFF +**/ + UINT8 SixCoreRatioLimit; + +/** Offset 0x0AC9 - 7-Core Ratio Limit + 7-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused + 7-Core Ratio Limit + OC Bins.This 7-Core Ratio Limit Must be Less than or equal + to 1-Core Ratio Limit.Range is 0 to 83 + 0x0:0xFF +**/ + UINT8 SevenCoreRatioLimit; + +/** Offset 0x0ACA - 8-Core Ratio Limit + 8-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused + 8-Core Ratio Limit + OC Bins.This 8-Core Ratio Limit Must be Less than or equal + to 1-Core Ratio Limit.Range is 0 to 83 + 0x0:0xFF +**/ + UINT8 EightCoreRatioLimit; + +/** Offset 0x0ACB - Intel Turbo Boost Max Technology 3.0 + Intel Turbo Boost Max Technology 3.0. 0: Disabled; 1: Enabled + $EN_DIS +**/ + UINT8 EnableItbm; + +/** Offset 0x0ACC - Intel Turbo Boost Max Technology 3.0 Driver + Intel Turbo Boost Max Technology 3.0 Driver 0: Disabled; 1: Enabled + $EN_DIS +**/ + UINT8 EnableItbmDriver; + +/** Offset 0x0ACD - Enable or Disable C1 Cstate Demotion + Enable or Disable C1 Cstate Demotion. Disable; 1: Enable + $EN_DIS +**/ + UINT8 C1StateAutoDemotion; + +/** Offset 0x0ACE - Enable or Disable C1 Cstate UnDemotion + Enable or Disable C1 Cstate UnDemotion. Disable; 1: Enable + $EN_DIS +**/ + UINT8 C1StateUnDemotion; + +/** Offset 0x0ACF - Minimum Ring ratio limit override + Minimum Ring ratio limit override. 0: Hardware defaults. Range: 0 - Max turbo + ratio limit +**/ + UINT8 MinRingRatioLimit; + +/** Offset 0x0AD0 - Maximum Ring ratio limit override + Maximum Ring ratio limit override. 0: Hardware defaults. Range: 0 - Max turbo + ratio limit +**/ + UINT8 MaxRingRatioLimit; + +/** Offset 0x0AD1 - Enable or Disable Per Core P State OS control + Enable or Disable Per Core P State OS control. 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 EnablePerCorePState; + +/** Offset 0x0AD2 - Enable or Disable HwP Autonomous Per Core P State OS control + Enable or Disable HwP Autonomous Per Core P State OS control. 0: Disable; 1: + Enable + $EN_DIS +**/ + UINT8 EnableHwpAutoPerCorePstate; + +/** Offset 0x0AD3 - Enable or Disable HwP Autonomous EPP Grouping + Enable or Disable HwP Autonomous EPP Grouping. 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 EnableHwpAutoEppGrouping; + +/** Offset 0x0AD4 - Enable or Disable EPB override over PECI + Enable or Disable EPB override over PECI. 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 EnableEpbPeciOverride; + +/** Offset 0x0AD5 - Enable or Disable Fast MSR for IA32_HWP_REQUEST + Enable or Disable Fast MSR for IA32_HWP_REQUEST. 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 EnableFastMsrHwpReq; + +/** Offset 0x0AD6 - Reserved +**/ + UINT8 Reserved41[33]; + +/** Offset 0x0AF7 - End of Post message + Test, Send End of Post message. Disable(0x0): Disable EOP message, Send in PEI(0x1): + EOP send in PEI, Send in DXE(0x2)(Default): EOP send in DXE + 0:Disable, 1:Send in PEI, 2:Send in DXE, 3:Reserved +**/ + UINT8 EndOfPostMessage; + +/** Offset 0x0AF8 - D0I3 Setting for HECI Disable + Test, 0: disable, 1: enable, Setting this option disables setting D0I3 bit for all + HECI devices + $EN_DIS +**/ + UINT8 DisableD0I3SettingForHeci; + +/** Offset 0x0AF9 - Enable LOCKDOWN SMI + Enable SMI_LOCK bit to prevent writes to the Global SMI Enable bit. + $EN_DIS +**/ + UINT8 PchLockDownGlobalSmi; + +/** Offset 0x0AFA - Enable LOCKDOWN BIOS Interface + Enable BIOS Interface Lock Down bit to prevent writes to the Backup Control Register. + $EN_DIS +**/ + UINT8 PchLockDownBiosInterface; + +/** Offset 0x0AFB - Unlock all GPIO pads + Force all GPIO pads to be unlocked for debug purpose. + $EN_DIS +**/ + UINT8 PchUnlockGpioPads; + +/** Offset 0x0AFC - PCH Unlock SideBand access + The SideBand PortID mask for certain end point (e.g. PSFx) will be locked before + 3rd party code execution. 0: Lock SideBand access; 1: Unlock SideBand access. + $EN_DIS +**/ + UINT8 PchSbAccessUnlock; + +/** Offset 0x0AFD - Reserved +**/ + UINT8 Reserved42; + +/** Offset 0x0AFE - PCIE RP Ltr Max Snoop Latency + Latency Tolerance Reporting, Max Snoop Latency. +**/ + UINT16 PcieRpLtrMaxSnoopLatency[24]; + +/** Offset 0x0B2E - PCIE RP Ltr Max No Snoop Latency + Latency Tolerance Reporting, Max Non-Snoop Latency. +**/ + UINT16 PcieRpLtrMaxNoSnoopLatency[24]; + +/** Offset 0x0B5E - PCIE RP Snoop Latency Override Mode + Latency Tolerance Reporting, Snoop Latency Override Mode. +**/ + UINT8 PcieRpSnoopLatencyOverrideMode[24]; + +/** Offset 0x0B76 - PCIE RP Snoop Latency Override Multiplier + Latency Tolerance Reporting, Snoop Latency Override Multiplier. +**/ + UINT8 PcieRpSnoopLatencyOverrideMultiplier[24]; + +/** Offset 0x0B8E - PCIE RP Snoop Latency Override Value + Latency Tolerance Reporting, Snoop Latency Override Value. +**/ + UINT16 PcieRpSnoopLatencyOverrideValue[24]; + +/** Offset 0x0BBE - PCIE RP Non Snoop Latency Override Mode + Latency Tolerance Reporting, Non-Snoop Latency Override Mode. +**/ + UINT8 PcieRpNonSnoopLatencyOverrideMode[24]; + +/** Offset 0x0BD6 - PCIE RP Non Snoop Latency Override Multiplier + Latency Tolerance Reporting, Non-Snoop Latency Override Multiplier. +**/ + UINT8 PcieRpNonSnoopLatencyOverrideMultiplier[24]; + +/** Offset 0x0BEE - PCIE RP Non Snoop Latency Override Value + Latency Tolerance Reporting, Non-Snoop Latency Override Value. +**/ + UINT16 PcieRpNonSnoopLatencyOverrideValue[24]; + +/** Offset 0x0C1E - PCIE RP Slot Power Limit Scale + Specifies scale used for slot power limit value. Leave as 0 to set to default. +**/ + UINT8 PcieRpSlotPowerLimitScale[24]; + +/** Offset 0x0C36 - PCIE RP Slot Power Limit Value + Specifies upper limit on power supplie by slot. Leave as 0 to set to default. +**/ + UINT16 PcieRpSlotPowerLimitValue[24]; + +/** Offset 0x0C66 - PCIE RP Enable Port8xh Decode + This member describes whether PCIE root port Port 8xh Decode is enabled. 0: Disable; + 1: Enable. + $EN_DIS +**/ + UINT8 PcieEnablePort8xhDecode; + +/** Offset 0x0C67 - PCIE Port8xh Decode Port Index + The Index of PCIe Port that is selected for Port8xh Decode (0 Based). +**/ + UINT8 PchPciePort8xhDecodePortIndex; + +/** Offset 0x0C68 - PCH Energy Reporting + Disable/Enable PCH to CPU energy report feature. + $EN_DIS +**/ + UINT8 PchPmDisableEnergyReport; + +/** Offset 0x0C69 - PCH Sata Test Mode + Allow entrance to the PCH SATA test modes. + $EN_DIS +**/ + UINT8 SataTestMode; + +/** Offset 0x0C6A - PCH USB OverCurrent mapping lock enable + If this policy option is enabled then BIOS will program OCCFDONE bit in xHCI meaning + that OC mapping data will be consumed by xHCI and OC mapping registers will be locked. + $EN_DIS +**/ + UINT8 PchXhciOcLock; + +/** Offset 0x0C6B - Reserved +**/ + UINT8 Reserved43; + +/** Offset 0x0C6C - Mctp Broadcast Cycle + Test, Determine if MCTP Broadcast is enabled 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 MctpBroadcastCycle; -/** Offset 0x0AEC - Reserved +/** Offset 0x0C6D - Reserved **/ - UINT8 Reserved30[452]; + UINT8 Reserved44[83]; } FSP_S_CONFIG; /** Fsp S UPD Configuration @@ -719,11 +2899,11 @@ typedef struct { **/ FSP_S_CONFIG FspsConfig; -/** Offset 0x0CB0 +/** Offset 0x0CC0 **/ UINT8 UnusedUpdSpace36[6]; -/** Offset 0x0CB6 +/** Offset 0x0CC6 **/ UINT16 UpdTerminator; } FSPS_UPD; -- cgit v1.2.3