From bd55c02a2398e2ce95cb06ff9f1e3fb1c20d0ab8 Mon Sep 17 00:00:00 2001 From: Balaji Manigandan B Date: Fri, 22 Sep 2017 14:27:56 +0530 Subject: vendor/intel/skykabylake: Update FSP header files to version 2.7.2 Update FSP header files to version 2.7.2. New UPDs added FspmUpd.h: *CleanMemory FspsUpd.h: *IslVrCmd *ThreeStrikeCounterDisable Structure member names used to specify memory configuration to MRC have been updated, SoC side romstage code is updated to handle this change. CQ-DEPEND=CL:*460573,CL:*460612,CL:*460592 BUG=b:65499724 BRANCH=None TEST= Build and boot soraka, basic sanity check and suspend resume checks. Change-Id: Ia4eca011bc9a3b1a50e49d6d86a09d05a0cbf151 Signed-off-by: Balaji Manigandan B Signed-off-by: Rizwan Qureshi Reviewed-on: https://review.coreboot.org/21679 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel Reviewed-by: Aaron Durbin Reviewed-by: Furquan Shaikh --- .../intel/fsp/fsp2_0/skykabylake/FspmUpd.h | 12 ++- .../intel/fsp/fsp2_0/skykabylake/FspsUpd.h | 45 ++++++--- .../intel/fsp/fsp2_0/skykabylake/MemInfoHob.h | 111 ++++++++++++++++----- 3 files changed, 123 insertions(+), 45 deletions(-) (limited to 'src/vendorcode/intel') diff --git a/src/vendorcode/intel/fsp/fsp2_0/skykabylake/FspmUpd.h b/src/vendorcode/intel/fsp/fsp2_0/skykabylake/FspmUpd.h index 1916e4e1c0..f3aa4c85c6 100644 --- a/src/vendorcode/intel/fsp/fsp2_0/skykabylake/FspmUpd.h +++ b/src/vendorcode/intel/fsp/fsp2_0/skykabylake/FspmUpd.h @@ -844,7 +844,7 @@ typedef struct { /** Offset 0x02E3 - Ring Downbin Ring Downbin enable/disable. When enabled, CPU will ensure the ring ratio is always - lower than the core ratio.0: Disable; 1: Enable. + lower than the core ratio. 0: Disable; 1: Enable. $EN_DIS **/ UINT8 RingDownBin; @@ -1255,9 +1255,15 @@ typedef struct { **/ UINT8 Avx3RatioOffset; -/** Offset 0x051B +/** Offset 0x051B - Ask MRC to clear memory content + Ask MRC to clear memory content 0: Do not Clear Memory; 1: Clear Memory. + $EN_DIS +**/ + UINT8 CleanMemory; + +/** Offset 0x051C **/ - UINT8 ReservedFspmUpd[5]; + UINT8 ReservedFspmUpd[4]; } FSP_M_CONFIG; /** Fsp M Test Configuration diff --git a/src/vendorcode/intel/fsp/fsp2_0/skykabylake/FspsUpd.h b/src/vendorcode/intel/fsp/fsp2_0/skykabylake/FspsUpd.h index b3c7698857..f4f4badf47 100644 --- a/src/vendorcode/intel/fsp/fsp2_0/skykabylake/FspsUpd.h +++ b/src/vendorcode/intel/fsp/fsp2_0/skykabylake/FspsUpd.h @@ -167,7 +167,7 @@ typedef struct { /** Offset 0x0036 - Flash Configuration Lock Down Enable/disable flash lock down. If platform decides to skip this programming, it - must lock SPI flash register before end of post. + must lock SPI flash register DLOCK, FLOCKDN, and WRSDIS before end of post. $EN_DIS **/ UINT8 SpiFlashCfgLockDown; @@ -484,7 +484,7 @@ typedef struct { /** Offset 0x020C - PCIe DeEmphasis control per root port 0: -6dB, 1(Default): -3.5dB - 0:Disable, 2:L1 + 0:-6dB, 1:-3.5dB **/ UINT8 PegDeEmphasis[3]; @@ -2060,9 +2060,15 @@ typedef struct { **/ UINT8 MeUnconfigIsValid; -/** Offset 0x077A +/** Offset 0x077A - Activates VR mailbox command for Intersil VR C-state issues. + Intersil VR mailbox command. 0 - no mailbox command sent. 1 - VR mailbox + command sent for IA/GT rails only. 2 - VR mailbox command sent for IA/GT/SA rails. +**/ + UINT8 IslVrCmd; + +/** Offset 0x077B **/ - UINT8 ReservedFspsUpd[6]; + UINT8 ReservedFspsUpd[5]; } FSP_S_CONFIG; /** Fsp S Test Configuration @@ -2107,7 +2113,7 @@ typedef struct { UINT8 DmiIot; /** Offset 0x0789 - PEG Max Payload size per root port - 0xFF(Default):Auto, 0x1: Force 128B, 0X2: Force 256B + 0xFF(Default):Auto, 0x1: Force 128B, 0x2: Force 256B 0xFF: Auto, 0x1: Force 128B, 0x2: Force 256B **/ UINT8 PegMaxPayload[3]; @@ -2520,25 +2526,25 @@ typedef struct { /** Offset 0x07DA - Enable or Disable Package C-State Demotion Enable or Disable Package C-State Demotion. 0: Disable; 1: Enable; 2: Auto (Auto: Enabled for Skylake; Disabled for Kabylake) - $EN_DIS + 0:Disable, 1:Enable, 2:Auto **/ UINT8 PkgCStateDemotion; /** Offset 0x07DB - Enable or Disable Package C-State UnDemotion Enable or Disable Package C-State UnDemotion. 0: Disable; 1: Enable; 2: Auto (Auto: Enabled for Skylake; Disabled for Kabylake) - $EN_DIS + 0:Disable, 1:Enable, 2:Auto **/ UINT8 PkgCStateUnDemotion; /** Offset 0x07DC - Enable or Disable CState-Pre wake - Enable or Disable CState-Pre wake. Disable; 1: Enable + Enable or Disable CState-Pre wake. 0: Disable; 1: Enable $EN_DIS **/ UINT8 CStatePreWake; /** Offset 0x07DD - Enable or Disable TimedMwait Support. - Enable or Disable TimedMwait Support. Disable; 1: Enable + Enable or Disable TimedMwait Support. 0: Disable; 1: Enable $EN_DIS **/ UINT8 TimedMwait; @@ -2606,7 +2612,7 @@ typedef struct { /** Offset 0x07E8 - Configuration for boot TDP selection Configuration for boot TDP selection; 0: TDP Nominal; 1: TDP Down; 2: TDP - Up;0xFF : Deactivate + Up; 0xFF: Deactivate 0:TDP Nominal, 1:TDP Down, 2:TDP Up, 0xFF:Deactivate **/ UINT8 ConfigTdpLevel; @@ -2632,12 +2638,14 @@ typedef struct { UINT16 StateRatio[40]; /** Offset 0x083C - Interrupt Response Time Limit of C-State LatencyContol0 - Interrupt Response Time Limit of C-State LatencyContol0. Range of value 0 to 0x3FF + Interrupt Response Time Limit of C-State LatencyContol0.Range of value 0 to 0x3FF, + Default is 0x4E, Server Platform is 0x4B **/ UINT16 CstateLatencyControl0Irtl; /** Offset 0x083E - Interrupt Response Time Limit of C-State LatencyContol1 - Interrupt Response Time Limit of C-State LatencyContol1.Range of value 0 to 0x3FF + Interrupt Response Time Limit of C-State LatencyContol1.Range of value 0 to 0x3FF, + Default is 0x76, Server Platform is 0x6B **/ UINT16 CstateLatencyControl1Irtl; @@ -2783,11 +2791,18 @@ typedef struct { **/ UINT8 EightCoreRatioLimit; -/** Offset 0x0888 - ReservedCpuPostMemTest +/** Offset 0x0888 - Set Three Strike Counter Disable + False (default): Three Strike counter will be incremented and True: Prevents Three + Strike counter from incrementing; 0: False; 1: True. + 0: False, 1: True +**/ + UINT8 ThreeStrikeCounterDisable; + +/** Offset 0x0889 - ReservedCpuPostMemTest Reserved for CPU Post-Mem Test $EN_DIS **/ - UINT8 ReservedCpuPostMemTest[2]; + UINT8 ReservedCpuPostMemTest[1]; /** Offset 0x088A - SgxSinitDataFromTpm SgxSinitDataFromTpm default values @@ -2923,7 +2938,7 @@ typedef struct { UINT8 PchPmDisableEnergyReport; /** Offset 0x0A2F - PCH Pm Pmc Read Disable - When set to true, this bit disallows host reads to PMC XRAM. + Deprecated $EN_DIS **/ UINT8 PchPmPmcReadDisable; diff --git a/src/vendorcode/intel/fsp/fsp2_0/skykabylake/MemInfoHob.h b/src/vendorcode/intel/fsp/fsp2_0/skykabylake/MemInfoHob.h index 8dc2db9437..248b4d5ef1 100644 --- a/src/vendorcode/intel/fsp/fsp2_0/skykabylake/MemInfoHob.h +++ b/src/vendorcode/intel/fsp/fsp2_0/skykabylake/MemInfoHob.h @@ -53,6 +53,25 @@ extern EFI_GUID gSiMemoryPlatformDataGuid; #define B_RANK2_PRS BIT4 #define B_RANK3_PRS BIT5 +// @todo remove and use the MdePkg\Include\Pi\PiHob.h +#if !defined(_PEI_HOB_H_) && !defined(__PI_HOB_H__) +#ifndef __HOB__H__ +typedef struct _EFI_HOB_GENERIC_HEADER { + UINT16 HobType; + UINT16 HobLength; + UINT32 Reserved; +} EFI_HOB_GENERIC_HEADER; + +typedef struct _EFI_HOB_GUID_TYPE { + EFI_HOB_GENERIC_HEADER Header; + EFI_GUID Name; + /// + /// Guid specific data goes here + /// +} EFI_HOB_GUID_TYPE; +#endif +#endif + /// /// Defines taken from MRC so avoid having to include MrcInterface.h /// @@ -122,7 +141,7 @@ typedef struct { #define MRC_DDR_TYPE_UNKNOWN 3 #endif -#define MAX_PROFILE_NUM 4 // number of memory profiles supported +#define MAX_PROFILE_NUM 4 // number of memory profiles supported #define MAX_XMP_PROFILE_NUM 2 // number of XMP profiles supported // @@ -151,64 +170,102 @@ typedef struct { UINT16 tWTR_S; ///< Number of tCK cycles for the channel DIMM's minimum internal write to read command delay time for different bank groups. } MRC_CH_TIMING; +typedef struct { + UINT8 SG; ///< Number of tCK cycles between transactions in the same bank group. + UINT8 DG; ///< Number of tCK cycles between transactions when switching bank groups. + UINT8 DR; ///< Number of tCK cycles between transactions when switching between Ranks (in the same DIMM). + UINT8 DD; ///< Number of tCK cycles between transactions when switching between DIMMs. +} MRC_TA_TIMING; + /// /// Memory SMBIOS & OC Memory Data Hob /// typedef struct { - UINT8 Status; ///< See MrcDimmStatus for the definition of this field. - UINT8 DimmId; - UINT32 DimmCapacity; ///< DIMM size in MBytes. - UINT16 MfgId; - UINT8 ModulePartNum[20]; ///< Module part number for DDR3 is 18 bytes however for DRR4 20 bytes as per JEDEC Spec, so reserving 20 bytes - UINT8 RankInDimm; ///< The number of ranks in this DIMM. - UINT8 SpdDramDeviceType; ///< Save SPD DramDeviceType information needed for SMBIOS structure creation. - UINT8 SpdModuleType; ///< Save SPD ModuleType information needed for SMBIOS structure creation. - UINT8 SpdModuleMemoryBusWidth; ///< Save SPD ModuleMemoryBusWidth information needed for SMBIOS structure creation. - UINT8 SpdSave[MAX_SPD_SAVE]; ///< Save SPD Manufacturing information needed for SMBIOS structure creation. + UINT8 Status; ///< See MrcDimmStatus for the definition of this field. + UINT8 DimmId; + UINT32 DimmCapacity; ///< DIMM size in MBytes. + UINT16 MfgId; + UINT8 ModulePartNum[20]; ///< Module part number for DDR3 is 18 bytes however for DRR4 20 bytes as per JEDEC Spec, so reserving 20 bytes + UINT8 RankInDimm; ///< The number of ranks in this DIMM. + UINT8 SpdDramDeviceType; ///< Save SPD DramDeviceType information needed for SMBIOS structure creation. + UINT8 SpdModuleType; ///< Save SPD ModuleType information needed for SMBIOS structure creation. + UINT8 SpdModuleMemoryBusWidth; ///< Save SPD ModuleMemoryBusWidth information needed for SMBIOS structure creation. + UINT8 SpdSave[MAX_SPD_SAVE]; ///< Save SPD Manufacturing information needed for SMBIOS structure creation. } DIMM_INFO; typedef struct { - UINT8 Status; ///< Indicates whether this channel should be used. - UINT8 ChannelId; - UINT8 DimmCount; ///< Number of valid DIMMs that exist in the channel. - MRC_CH_TIMING Timing[MAX_PROFILE_NUM]; ///< The channel timing values. - DIMM_INFO Dimm[MAX_DIMM]; ///< Save the DIMM output characteristics. + UINT8 Status; ///< Indicates whether this channel should be used. + UINT8 ChannelId; + UINT8 DimmCount; ///< Number of valid DIMMs that exist in the channel. + MRC_CH_TIMING Timing[MAX_PROFILE_NUM]; ///< The channel timing values. + DIMM_INFO DimmInfo[MAX_DIMM]; ///< Save the DIMM output characteristics. } CHANNEL_INFO; typedef struct { - UINT8 Status; ///< Indicates whether this controller should be used. - UINT16 DeviceId; ///< The PCI device id of this memory controller. - UINT8 RevisionId; ///< The PCI revision id of this memory controller. - UINT8 ChannelCount; ///< Number of valid channels that exist on the controller. - CHANNEL_INFO Channel[MAX_CH]; ///< The following are channel level definitions. + UINT8 Status; ///< Indicates whether this controller should be used. + UINT16 DeviceId; ///< The PCI device id of this memory controller. + UINT8 RevisionId; ///< The PCI revision id of this memory controller. + UINT8 ChannelCount; ///< Number of valid channels that exist on the controller. + CHANNEL_INFO ChannelInfo[MAX_CH]; ///< The following are channel level definitions. + MRC_TA_TIMING tRd2Rd; ///< Read-to-Read Turn Around Timings + MRC_TA_TIMING tRd2Wr; ///< Read-to-Write Turn Around Timings + MRC_TA_TIMING tWr2Rd; ///< Write-to-Read Turn Around Timings + MRC_TA_TIMING tWr2Wr; ///< Write-to-Write Turn Around Timings } CONTROLLER_INFO; typedef struct { UINT8 Revision; - UINT16 DataWidth; + UINT16 DataWidth; ///< Data width, in bits, of this memory device /** As defined in SMBIOS 3.0 spec Section 7.18.2 and Table 75 **/ - UINT8 DdrType; ///< DDR type: DDR3, DDR4, or LPDDR3 - UINT32 Frequency; ///< The system's common memory controller frequency in MT/s. + UINT8 MemoryType; ///< DDR type: DDR3, DDR4, or LPDDR3 + UINT16 MaximumMemoryClockSpeed;///< The maximum capable speed of the device, in megahertz (MHz) + UINT16 ConfiguredMemoryClockSpeed; ///< The configured clock speed to the memory device, in megahertz (MHz) /** As defined in SMBIOS 3.0 spec Section 7.17.3 and Table 72 **/ UINT8 ErrorCorrectionType; SiMrcVersion Version; - UINT32 FreqMax; BOOLEAN EccSupport; UINT8 MemoryProfile; UINT32 TotalPhysicalMemorySize; - UINT32 DefaultXmptCK[MAX_XMP_PROFILE_NUM]; // Stores the tCK value read from SPD XMP profiles if they exist. - UINT8 XmpProfileEnable; // If XMP capable DIMMs are detected, this will indicate which XMP Profiles are common among all DIMMs. + UINT32 DefaultXmptCK[MAX_XMP_PROFILE_NUM];///< Stores the tCK value read from SPD XMP profiles if they exist. + UINT8 XmpProfileEnable; ///< If XMP capable DIMMs are detected, this will indicate which XMP Profiles are common among all DIMMs. UINT8 Ratio; UINT8 RefClk; UINT32 VddVoltage[MAX_PROFILE_NUM]; CONTROLLER_INFO Controller[MAX_NODE]; } MEMORY_INFO_DATA_HOB; +/** + Memory Platform Data Hob + + Revision 1: + - Initial version. + Revision 2: + - Added TsegBase, PrmrrSize, PrmrrBase, Gttbase, MmioSize, PciEBaseAddress fields +**/ +typedef struct { + UINT8 Revision; + UINT8 Reserved[3]; + UINT32 BootMode; + UINT32 TsegSize; + UINT32 TsegBase; + UINT32 PrmrrSize; + UINT32 PrmrrBase; + UINT32 GttBase; + UINT32 MmioSize; + UINT32 PciEBaseAddress; +} MEMORY_PLATFORM_DATA; + +typedef struct { + EFI_HOB_GUID_TYPE EfiHobGuidType; + MEMORY_PLATFORM_DATA Data; + UINT8 *Buffer; +} MEMORY_PLATFORM_DATA_HOB; + #pragma pack (pop) #endif // _MEM_INFO_HOB_H_ -- cgit v1.2.3