From 26dc8f2c4e7634b4298e13e4e26aab3109252d13 Mon Sep 17 00:00:00 2001 From: Felix Singer Date: Sat, 7 Mar 2020 12:31:17 +0100 Subject: soc/intel/cometlake: Use IntelFSP repo MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Make use of the publicly-available FSP binaries and headers for Comet Lake. Also, remove the Comet Lake header files from src/vendorcode, since they are no longer necessary. Change-Id: I392cc7ee3bf5aa21753efd6eab4abd643b65ff94 Signed-off-by: Felix Singer Reviewed-on: https://review.coreboot.org/c/coreboot/+/39372 Reviewed-by: Tim Wawrzynczak Reviewed-by: Furquan Shaikh Reviewed-by: Angel Pons Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) --- .../intel/fsp/fsp2_0/cometlake/FspsUpd.h | 3666 -------------------- 1 file changed, 3666 deletions(-) delete mode 100644 src/vendorcode/intel/fsp/fsp2_0/cometlake/FspsUpd.h (limited to 'src/vendorcode/intel/fsp/fsp2_0/cometlake/FspsUpd.h') diff --git a/src/vendorcode/intel/fsp/fsp2_0/cometlake/FspsUpd.h b/src/vendorcode/intel/fsp/fsp2_0/cometlake/FspsUpd.h deleted file mode 100644 index f56cba9b5c..0000000000 --- a/src/vendorcode/intel/fsp/fsp2_0/cometlake/FspsUpd.h +++ /dev/null @@ -1,3666 +0,0 @@ -/** @file - -Copyright (c) 2019, Intel Corporation. All rights reserved.
- -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - -* Redistributions of source code must retain the above copyright notice, this - list of conditions and the following disclaimer. -* Redistributions in binary form must reproduce the above copyright notice, this - list of conditions and the following disclaimer in the documentation and/or - other materials provided with the distribution. -* Neither the name of Intel Corporation nor the names of its contributors may - be used to endorse or promote products derived from this software without - specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE - LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF - THE POSSIBILITY OF SUCH DAMAGE. - - This file is automatically generated. Please do NOT modify !!! - -**/ - -#ifndef __FSPSUPD_H__ -#define __FSPSUPD_H__ - -#include - -#pragma pack(1) - - -/// -/// Azalia Header structure -/// -typedef struct { - UINT16 VendorId; ///< Codec Vendor ID - UINT16 DeviceId; ///< Codec Device ID - UINT8 RevisionId; ///< Revision ID of the codec. 0xFF matches any revision. - UINT8 SdiNum; ///< SDI number, 0xFF matches any SDI. - UINT16 DataDwords; ///< Number of data DWORDs pointed by the codec data buffer. - UINT32 Reserved; ///< Reserved for future use. Must be set to 0. -} AZALIA_HEADER; - -/// -/// Audio Azalia Verb Table structure -/// -typedef struct { - AZALIA_HEADER Header; ///< AZALIA PCH header - UINT32 *Data; ///< Pointer to the data buffer. Its length is specified in the header -} AUDIO_AZALIA_VERB_TABLE; - -/// -/// Refer to the definition of PCH_INT_PIN -/// -typedef enum { - SiPchNoInt, ///< No Interrupt Pin - SiPchIntA, - SiPchIntB, - SiPchIntC, - SiPchIntD -} SI_PCH_INT_PIN; -/// -/// The PCH_DEVICE_INTERRUPT_CONFIG block describes interrupt pin, IRQ and interrupt mode for PCH device. -/// -typedef struct { - UINT8 Device; ///< Device number - UINT8 Function; ///< Device function - UINT8 IntX; ///< Interrupt pin: INTA-INTD (see SI_PCH_INT_PIN) - UINT8 Irq; ///< IRQ to be set for device. -} SI_PCH_DEVICE_INTERRUPT_CONFIG; - -#define SI_PCH_MAX_DEVICE_INTERRUPT_CONFIG 64 ///< Number of all PCH devices - - -/** Fsp S Configuration -**/ -typedef struct { - -/** Offset 0x0020 - Logo Pointer - Points to PEI Display Logo Image -**/ - UINT32 LogoPtr; - -/** Offset 0x0024 - Logo Size - Size of PEI Display Logo Image -**/ - UINT32 LogoSize; - -/** Offset 0x0028 - Graphics Configuration Ptr - Points to VBT -**/ - UINT32 GraphicsConfigPtr; - -/** Offset 0x002C - Enable Device 4 - Enable/disable Device 4 - $EN_DIS -**/ - UINT8 Device4Enable; - -/** Offset 0x002D -**/ - UINT8 UnusedUpdSpace0[3]; - -/** Offset 0x0030 - MicrocodeRegionBase - Memory Base of Microcode Updates -**/ - UINT32 MicrocodeRegionBase; - -/** Offset 0x0034 - MicrocodeRegionSize - Size of Microcode Updates -**/ - UINT32 MicrocodeRegionSize; - -/** Offset 0x0038 - Turbo Mode - Enable/Disable Turbo mode. 0: disable, 1: enable - $EN_DIS -**/ - UINT8 TurboMode; - -/** Offset 0x0039 - PchDmiCwbEnable - Central Write Buffer feature configurable and disabled by default - $EN_DIS -**/ - UINT8 PchDmiCwbEnable; - -/** Offset 0x003A - HECI3 state - The HECI3 state from Mbp for reference in S3 path or when MbpHob is not installed. - 0: disable, 1: enable - $EN_DIS -**/ - UINT8 Heci3Enabled; - -/** Offset 0x003B - HECI1 state - Determine if HECI1 is hidden prior to boot to OS. 0: Disable; 1: Enable. - $EN_DIS -**/ - UINT8 Heci1Disabled; - -/** Offset 0x003C - AMT Switch - Enable/Disable. 0: Disable, 1: enable, Enable or disable AMT functionality. - $EN_DIS -**/ - UINT8 AmtEnabled; - -/** Offset 0x003D - WatchDog Timer Switch - Enable/Disable. 0: Disable, 1: enable, Enable or disable WatchDog timer. Setting - is invalid if AmtEnabled is 0. - $EN_DIS -**/ - UINT8 WatchDogEnabled; - -/** Offset 0x003E - Manageability Mode set by Mebx - Enable/Disable. 0: Disable, 1: enable, Enable or disable Manageability Mode. - $EN_DIS -**/ - UINT8 ManageabilityMode; - -/** Offset 0x003F - PET Progress - Enable/Disable. 0: Disable, 1: enable, Enable/Disable PET Events Progress to receive - PET Events. Setting is invalid if AmtEnabled is 0. - $EN_DIS -**/ - UINT8 FwProgress; - -/** Offset 0x0040 - SOL Switch - Enable/Disable. 0: Disable, 1: enable, Serial Over Lan enable/disable state by Mebx. - Setting is invalid if AmtEnabled is 0. - $EN_DIS -**/ - UINT8 AmtSolEnabled; - -/** Offset 0x0041 -**/ - UINT8 UnusedUpdSpace1; - -/** Offset 0x0042 - OS Timer - 16 bits Value, Set OS watchdog timer. Setting is invalid if AmtEnabled is 0. -**/ - UINT16 WatchDogTimerOs; - -/** Offset 0x0044 - BIOS Timer - 16 bits Value, Set BIOS watchdog timer. Setting is invalid if AmtEnabled is 0. -**/ - UINT16 WatchDogTimerBios; - -/** Offset 0x0046 - Remote Assistance Trigger Availablilty - Enable/Disable. 0: Disable, 1: enable, Remote Assistance enable/disable state by Mebx. - $EN_DIS -**/ - UINT8 RemoteAssistance; - -/** Offset 0x0047 - KVM Switch - Enable/Disable. 0: Disable, 1: enable, KVM enable/disable state by Mebx. Setting - is invalid if AmtEnabled is 0. - $EN_DIS -**/ - UINT8 AmtKvmEnabled; - -/** Offset 0x0048 - MEBX execution - Enable/Disable. 0: Disable, 1: enable, Force MEBX execution. - $EN_DIS -**/ - UINT8 ForcMebxSyncUp; - -/** Offset 0x0049 - Enable/Disable SA CRID - Enable: SA CRID, Disable (Default): SA CRID - $EN_DIS -**/ - UINT8 CridEnable; - -/** Offset 0x004A - DMI ASPM - 0=Disable, 1:L0s, 2:L1, 3(Default)=L0sL1 - 0:Disable, 1:L0s, 2:L1, 3:L0sL1 -**/ - UINT8 DmiAspm; - -/** Offset 0x004B - PCIe DeEmphasis control per root port - 0: -6dB, 1(Default): -3.5dB - 0:-6dB, 1:-3.5dB -**/ - UINT8 PegDeEmphasis[4]; - -/** Offset 0x004F - PCIe Slot Power Limit value per root port - Slot power limit value per root port -**/ - UINT8 PegSlotPowerLimitValue[4]; - -/** Offset 0x0053 - PCIe Slot Power Limit scale per root port - Slot power limit scale per root port - 0:1.0x, 1:0.1x, 2:0.01x, 3:0x001x -**/ - UINT8 PegSlotPowerLimitScale[4]; - -/** Offset 0x0057 -**/ - UINT8 UnusedUpdSpace2[1]; - -/** Offset 0x0058 - PCIe Physical Slot Number per root port - Physical Slot Number per root port -**/ - UINT16 PegPhysicalSlotNumber[4]; - -/** Offset 0x0060 - Enable/Disable PavpEnable - Enable(Default): Enable PavpEnable, Disable: Disable PavpEnable - $EN_DIS -**/ - UINT8 PavpEnable; - -/** Offset 0x0061 - CdClock Frequency selection - 0=337.5 Mhz, 1=450 Mhz, 2=540 Mhz, 3(Default)=675 Mhz - 0: 337.5 Mhz, 1: 450 Mhz, 2: 540 Mhz, 3: 675 Mhz -**/ - UINT8 CdClock; - -/** Offset 0x0062 - Enable/Disable PeiGraphicsPeimInit - Enable: Enable PeiGraphicsPeimInit, Disable(Default): Disable PeiGraphicsPeimInit - $EN_DIS -**/ - UINT8 PeiGraphicsPeimInit; - -/** Offset 0x0063 - Enable or disable GNA device - 0=Disable, 1(Default)=Enable - $EN_DIS -**/ - UINT8 GnaEnable; - -/** Offset 0x0064 - State of X2APIC_OPT_OUT bit in the DMAR table - 0=Disable/Clear, 1=Enable/Set - $EN_DIS -**/ - UINT8 X2ApicOptOutDeprecated; - -/** Offset 0x0065 -**/ - UINT8 UnusedUpdSpace3[3]; - -/** Offset 0x0068 - Base addresses for VT-d function MMIO access - Base addresses for VT-d MMIO access per VT-d engine -**/ - UINT32 VtdBaseAddressDeprecated[3]; - -/** Offset 0x0074 - Enable or disable eDP device - 0=Disable, 1(Default)=Enable - $EN_DIS -**/ - UINT8 DdiPortEdp; - -/** Offset 0x0075 - Enable or disable HPD of DDI port B - 0=Disable, 1(Default)=Enable - $EN_DIS -**/ - UINT8 DdiPortBHpd; - -/** Offset 0x0076 - Enable or disable HPD of DDI port C - 0=Disable, 1(Default)=Enable - $EN_DIS -**/ - UINT8 DdiPortCHpd; - -/** Offset 0x0077 - Enable or disable HPD of DDI port D - 0=Disable, 1(Default)=Enable - $EN_DIS -**/ - UINT8 DdiPortDHpd; - -/** Offset 0x0078 - Enable or disable HPD of DDI port F - 0=Disable, 1(Default)=Enable - $EN_DIS -**/ - UINT8 DdiPortFHpd; - -/** Offset 0x0079 - Enable or disable DDC of DDI port B - 0=Disable, 1(Default)=Enable - $EN_DIS -**/ - UINT8 DdiPortBDdc; - -/** Offset 0x007A - Enable or disable DDC of DDI port C - 0=Disable, 1(Default)=Enable - $EN_DIS -**/ - UINT8 DdiPortCDdc; - -/** Offset 0x007B - Enable or disable DDC of DDI port D - 0=Disable, 1(Default)=Enable - $EN_DIS -**/ - UINT8 DdiPortDDdc; - -/** Offset 0x007C - Enable or disable DDC of DDI port F - 0(Default)=Disable, 1=Enable - $EN_DIS -**/ - UINT8 DdiPortFDdc; - -/** Offset 0x007D - Enable/Disable SkipS3CdClockInit - Enable: Skip Full CD clock initializaton, Disable(Default): Initialize the full - CD clock in S3 resume due to GOP absent - $EN_DIS -**/ - UINT8 SkipS3CdClockInit; - -/** Offset 0x007E - Delta T12 Power Cycle Delay required in ms - DEPRECATED - 0 : No Delay, 0xFFFF : Auto Calulate T12 Delay -**/ - UINT16 DeltaT12PowerCycleDelay; - -/** Offset 0x0080 - Blt Buffer Address - Address of Blt buffer -**/ - UINT32 BltBufferAddress; - -/** Offset 0x0084 - Blt Buffer Size - Size of Blt Buffer, is equal to PixelWidth * PixelHeight * 4 bytes (the size of - EFI_GRAPHICS_OUTPUT_BLT_PIXEL) -**/ - UINT32 BltBufferSize; - -/** Offset 0x0088 - Program GT Chicken bits - Progarm the GT chicken bits in GTTMMADR + 0xD00 BITS [3:1] -**/ - UINT8 ProgramGtChickenBits; - -/** Offset 0x0089 - SaPostMemProductionRsvd - Reserved for SA Post-Mem Production - $EN_DIS -**/ - UINT8 SaPostMemProductionRsvd[34]; - -/** Offset 0x00AB - PCIE RP Disable Gen2PLL Shutdown and L1 Clock Gating Enable - PCIE RP Disable Gen2PLL Shutdown and L1 Clock Gating Enable Workaround needed for - Alpine ridge -**/ - UINT8 PcieRootPortGen2PllL1CgDisable[24]; - -/** Offset 0x00C3 - Advanced Encryption Standard (AES) feature - Enable or Disable Advanced Encryption Standard (AES) feature; 0: Disable; 1: Enable - $EN_DIS -**/ - UINT8 AesEnable; - -/** Offset 0x00C4 - Power State 3 enable/disable - PCODE MMIO Mailbox: Power State 3 enable/disable; 0: Disable; 1: Enable. - For all VR Indexes -**/ - UINT8 Psi3Enable[5]; - -/** Offset 0x00C9 - Power State 4 enable/disable - PCODE MMIO Mailbox: Power State 4 enable/disable; 0: Disable; 1: Enable.For - all VR Indexes -**/ - UINT8 Psi4Enable[5]; - -/** Offset 0x00CE - Imon slope correction - PCODE MMIO Mailbox: Imon slope correction. Specified in 1/100 increment values. - Range is 0-200. 125 = 1.25. 0: Auto.For all VR Indexes -**/ - UINT8 ImonSlope[5]; - -/** Offset 0x00D3 - Imon offset correction - DEPRECATED -**/ - UINT8 ImonOffset[5]; - -/** Offset 0x00D8 - Enable/Disable BIOS configuration of VR - Enable/Disable BIOS configuration of VR; 0: Disable; 1: Enable.For all VR Indexes -**/ - UINT8 VrConfigEnable[5]; - -/** Offset 0x00DD - Thermal Design Current enable/disable - PCODE MMIO Mailbox: Thermal Design Current enable/disable; 0: Disable; 1: - Enable.For all VR Indexes -**/ - UINT8 TdcEnable[5]; - -/** Offset 0x00E2 - HECI3 state - PCODE MMIO Mailbox: Thermal Design Current time window. Defined in milli seconds. - Valid Values 1 - 1ms , 2 - 2ms , 3 - 3ms , 4 - 4ms , 5 - 5ms , 6 - 6ms , 7 - 7ms - , 8 - 8ms , 10 - 10ms.For all VR Indexe -**/ - UINT8 TdcTimeWindow[5]; - -/** Offset 0x00E7 - Thermal Design Current Lock - PCODE MMIO Mailbox: Thermal Design Current Lock; 0: Disable; 1: Enable.For - all VR Indexes -**/ - UINT8 TdcLock[5]; - -/** Offset 0x00EC - Platform Psys slope correction - PCODE MMIO Mailbox: Platform Psys slope correction. 0 - Auto Specified in - 1/100 increment values. Range is 0-200. 125 = 1.25 -**/ - UINT8 PsysSlope; - -/** Offset 0x00ED - Platform Psys offset correction - PCODE MMIO Mailbox: Platform Psys offset correction. 0 - Auto Units 1/4, - Range 0-255. Value of 100 = 100/4 = 25 offset -**/ - UINT8 PsysOffset; - -/** Offset 0x00EE - Acoustic Noise Mitigation feature - Enable or Disable Acoustic Noise Mitigation feature. This has to be enabled to program - slew rate configuration for all VR domains, Pre Wake, Ramp Up and, Ramp Down times.0: - Disabled; 1: Enabled - $EN_DIS -**/ - UINT8 AcousticNoiseMitigation; - -/** Offset 0x00EF - Disable Fast Slew Rate for Deep Package C States for VR IA domain - Disable Fast Slew Rate for Deep Package C States based on Acoustic Noise Mitigation - feature enabled. 0: False; 1: True - $EN_DIS -**/ - UINT8 FastPkgCRampDisableIa; - -/** Offset 0x00F0 - Slew Rate configuration for Deep Package C States for VR IA domain - Slew Rate configuration for Deep Package C States for VR IA domain based on Acoustic - Noise Mitigation feature enabled. 0: Fast/2; 1: Fast/4; 2: Fast/8; 3: Fast/16 - 0: Fast/2, 1: Fast/4, 2: Fast/8, 3: Fast/16 -**/ - UINT8 SlowSlewRateForIa; - -/** Offset 0x00F1 - Slew Rate configuration for Deep Package C States for VR GT domain - Slew Rate configuration for Deep Package C States for VR GT domain based on Acoustic - Noise Mitigation feature enabled. 0: Fast/2; 1: Fast/4; 2: Fast/8; 3: Fast/16 - 0: Fast/2, 1: Fast/4, 2: Fast/8, 3: Fast/16 -**/ - UINT8 SlowSlewRateForGt; - -/** Offset 0x00F2 - Slew Rate configuration for Deep Package C States for VR SA domain - Slew Rate configuration for Deep Package C States for VR SA domain based on Acoustic - Noise Mitigation feature enabled. 0: Fast/2; 1: Fast/4; 2: Fast/8; 3: Fast/16 - 0: Fast/2, 1: Fast/4, 2: Fast/8, 3: Fast/16 -**/ - UINT8 SlowSlewRateForSa; - -/** Offset 0x00F3 -**/ - UINT8 UnusedUpdSpace4[1]; - -/** Offset 0x00F4 - Thermal Design Current current limit - PCODE MMIO Mailbox: Thermal Design Current current limit. Specified in 1/8A units. - Range is 0-4095. 1000 = 125A. 0: Auto. For all VR Indexes -**/ - UINT16 TdcPowerLimit[5]; - -/** Offset 0x00FE - AcLoadline - PCODE MMIO Mailbox: AcLoadline in 1/100 mOhms (ie. 1250 = 12.50 mOhm); Range is - 0-6249. Intel Recommended Defaults vary by domain and SKU. -**/ - UINT16 AcLoadline[5]; - -/** Offset 0x0108 - DcLoadline - PCODE MMIO Mailbox: DcLoadline in 1/100 mOhms (ie. 1250 = 12.50 mOhm); Range is - 0-6249.Intel Recommended Defaults vary by domain and SKU. -**/ - UINT16 DcLoadline[5]; - -/** Offset 0x0112 - Power State 1 Threshold current - PCODE MMIO Mailbox: Power State 1 current cuttof in 1/4 Amp increments. Range is 0-128A. -**/ - UINT16 Psi1Threshold[5]; - -/** Offset 0x011C - Power State 2 Threshold current - PCODE MMIO Mailbox: Power State 2 current cuttof in 1/4 Amp increments. Range is 0-128A. -**/ - UINT16 Psi2Threshold[5]; - -/** Offset 0x0126 - Power State 3 Threshold current - PCODE MMIO Mailbox: Power State 3 current cuttof in 1/4 Amp increments. Range is 0-128A. -**/ - UINT16 Psi3Threshold[5]; - -/** Offset 0x0130 - Icc Max limit - PCODE MMIO Mailbox: VR Icc Max limit. 0-255A in 1/4 A units. 400 = 100A -**/ - UINT16 IccMax[5]; - -/** Offset 0x013A - VR Voltage Limit - PCODE MMIO Mailbox: VR Voltage Limit. Range is 0-7999mV. -**/ - UINT16 VrVoltageLimit[5]; - -/** Offset 0x0144 - Disable Fast Slew Rate for Deep Package C States for VR GT domain - Disable Fast Slew Rate for Deep Package C States based on Acoustic Noise Mitigation - feature enabled. 0: False; 1: True - $EN_DIS -**/ - UINT8 FastPkgCRampDisableGt; - -/** Offset 0x0145 - Disable Fast Slew Rate for Deep Package C States for VR SA domain - Disable Fast Slew Rate for Deep Package C States based on Acoustic Noise Mitigation - feature enabled. 0: False; 1: True - $EN_DIS -**/ - UINT8 FastPkgCRampDisableSa; - -/** Offset 0x0146 - Enable VR specific mailbox command - VR specific mailbox commands. 00b - no VR specific command sent. 01b - A - VR mailbox command specifically for the MPS IMPV8 VR will be sent. 10b - VR specific - command sent for PS4 exit issue. 11b - Reserved. - $EN_DIS -**/ - UINT8 SendVrMbxCmd; - -/** Offset 0x0147 - Reserved - Reserved -**/ - UINT8 Reserved2; - -/** Offset 0x0148 - Enable or Disable TXT - Enable or Disable TXT; 0: Disable; 1: Enable. - $EN_DIS -**/ - UINT8 TxtEnable; - -/** Offset 0x0149 - Deprecated DO NOT USE Skip Multi-Processor Initialization - @deprecated SkipMpInit has been moved to FspmUpd - $EN_DIS -**/ - UINT8 SkipMpInitDeprecated; - -/** Offset 0x014A - McIVR RFI Frequency Prefix - PCODE MMIO Mailbox: McIVR RFI Frequency Adjustment Prefix. 0: Plus (+); 1: - Minus (-). -**/ - UINT8 McivrRfiFrequencyPrefix; - -/** Offset 0x014B - McIVR RFI Frequency Adjustment - PCODE MMIO Mailbox: Adjust the RFI frequency relative to the nominal frequency in - increments of 100KHz. For subtraction, change McivrRfiFrequencyPrefix. 0: Auto. -**/ - UINT8 McivrRfiFrequencyAdjust; - -/** Offset 0x014C - FIVR RFI Frequency - PCODE MMIO Mailbox: Set the desired RFI frequency, in increments of 100KHz. 0: - Auto. Range varies based on XTAL clock: 0-1918 (Up to 191.8HMz) for 24MHz clock; - 0-1535 (Up to 153.5MHz) for 19MHz clock. -**/ - UINT16 FivrRfiFrequency; - -/** Offset 0x014E - McIVR RFI Spread Spectrum - PCODE MMIO Mailbox: McIVR RFI Spread Spectrum. 0: 0%; 1: +/- 0.5%; 2: +/- - 1%; 3: +/- 1.5%; 4: +/- 2%; 5: +/- 3%; 6: +/- 4%; 7: +/- 5%; 8: +/- 6%. -**/ - UINT8 McivrSpreadSpectrum; - -/** Offset 0x014F - FIVR RFI Spread Spectrum - PCODE MMIO Mailbox: FIVR RFI Spread Spectrum, in 0.1% increments. 0: 0%; - Range: 0.0% to 10.0% (0-100). -**/ - UINT8 FivrSpreadSpectrum; - -/** Offset 0x0150 - Disable Fast Slew Rate for Deep Package C States for VR FIVR domain - Disable Fast Slew Rate for Deep Package C States based on Acoustic Noise Mitigation - feature enabled. 0: False; 1: True - $EN_DIS -**/ - UINT8 FastPkgCRampDisableFivr; - -/** Offset 0x0151 - Slew Rate configuration for Deep Package C States for VR FIVR domain - Slew Rate configuration for Deep Package C States for VR FIVR domain based on Acoustic - Noise Mitigation feature enabled. 0: Fast/2; 1: Fast/4; 2: Fast/8; 3: Fast/16 - 0: Fast/2, 1: Fast/4, 2: Fast/8, 3: Fast/16 -**/ - UINT8 SlowSlewRateForFivr; - -/** Offset 0x0152 -**/ - UINT8 UnusedUpdSpace5[2]; - -/** Offset 0x0154 - CpuBistData - Pointer CPU BIST Data -**/ - UINT32 CpuBistData; - -/** Offset 0x0158 - Activates VR mailbox command for Intersil VR C-state issues. - Intersil VR mailbox command. 0 - no mailbox command sent. 1 - VR mailbox - command sent for IA/GT rails only. 2 - VR mailbox command sent for IA/GT/SA rails. -**/ - UINT8 IslVrCmd; - -/** Offset 0x0159 -**/ - UINT8 UnusedUpdSpace6[1]; - -/** Offset 0x015A - Imon slope1 correction - PCODE MMIO Mailbox: Imon slope correction. Specified in 1/100 increment values. - Range is 0-200. 125 = 1.25. 0: Auto.For all VR Indexes -**/ - UINT16 ImonSlope1[5]; - -/** Offset 0x0164 - CPU VR Power Delivery Design - Used to communicate the power delivery design capability of the board. This value - is an enum of the available power delivery segments that are defined in the Platform - Design Guide. -**/ - UINT32 VrPowerDeliveryDesign; - -/** Offset 0x0168 - Pre Wake Randomization time - PCODE MMIO Mailbox: Acoustic Migitation Range.Defines the maximum pre-wake randomization - time in micro ticks.This can be programmed only if AcousticNoiseMigitation is enabled. - Range 0-255 0. -**/ - UINT8 PreWake; - -/** Offset 0x0169 - Ramp Up Randomization time - PCODE MMIO Mailbox: Acoustic Migitation Range.Defines the maximum Ramp Up randomization - time in micro ticks.This can be programmed only if AcousticNoiseMigitation is enabled.Range - 0-255 0. -**/ - UINT8 RampUp; - -/** Offset 0x016A - Ramp Down Randomization time - PCODE MMIO Mailbox: Acoustic Migitation Range.Defines the maximum Ramp Down randomization - time in micro ticks.This can be programmed only if AcousticNoiseMigitation is enabled.Range - 0-255 0. -**/ - UINT8 RampDown; - -/** Offset 0x016B -**/ - UINT8 UnusedUpdSpace7; - -/** Offset 0x016C - CpuMpPpi - Pointer for CpuMpPpi -**/ - UINT32 CpuMpPpi; - -/** Offset 0x0170 - CpuMpHob - Pointer for CpuMpHob. This is optional data buffer for CpuMpPpi usage. -**/ - UINT32 CpuMpHob; - -/** Offset 0x0174 - Enable or Disable processor debug features - Enable or Disable processor debug features; 0: Disable; 1: Enable. - $EN_DIS -**/ - UINT8 DebugInterfaceEnable; - -/** Offset 0x0175 -**/ - UINT8 UnusedUpdSpace8[1]; - -/** Offset 0x0176 - Imon offset 1 correction - PCODE MMIO Mailbox: Imon offset correction. Value is a 2's complement signed integer. - Units 1/1000, Range 0-63999. For an offset = 12.580, use 12580. 0: Auto -**/ - UINT16 ImonOffset1[5]; - -/** Offset 0x0180 - ReservedCpuPostMemProduction - Reserved for CPU Post-Mem Production - $EN_DIS -**/ - UINT8 ReservedCpuPostMemProduction[8]; - -/** Offset 0x0188 - Enable HD Audio DSP - Enable/disable HD Audio DSP feature. - $EN_DIS -**/ - UINT8 PchHdaDspEnable; - -/** Offset 0x0189 - SPI0 Chip Select Polarity - Sets polarity for each chip Select. Available options: 0:PchSerialIoCsActiveLow, - 1:PchSerialIoCsActiveHigh -**/ - UINT8 SerialIoSpi0CsPolarity[2]; - -/** Offset 0x018B - SPI1 Chip Select Polarity - Sets polarity for each chip Select. Available options: 0:PchSerialIoCsActiveLow, - 1:PchSerialIoCsActiveHigh -**/ - UINT8 SerialIoSpi1CsPolarity[2]; - -/** Offset 0x018D - SPI2 Chip Select Polarity - Sets polarity for each chip Select. Available options: 0:PchSerialIoCsActiveLow, - 1:PchSerialIoCsActiveHigh -**/ - UINT8 SerialIoSpi2CsPolarity[2]; - -/** Offset 0x018F - SPI0 Chip Select Enable - 0:Disabled, 1:Enabled. Enables GPIO for CS0 or CS1 if it is Enabled -**/ - UINT8 SerialIoSpi0CsEnable[2]; - -/** Offset 0x0191 - SPI1 Chip Select Enable - 0:Disabled, 1:Enabled. Enables GPIO for CS0 or CS1 if it is Enabled -**/ - UINT8 SerialIoSpi1CsEnable[2]; - -/** Offset 0x0193 - SPI2 Chip Select Enable - 0:Disabled, 1:Enabled. Enables GPIO for CS0 or CS1 if it is Enabled -**/ - UINT8 SerialIoSpi2CsEnable[2]; - -/** Offset 0x0195 - SPIn Device Mode - Selects SPI operation mode. N represents controller index: SPI0, SPI1, ... Available - modes: 0:SerialIoSpiDisabled, 1:SerialIoSpiPci, 2:SerialIoSpiHidden -**/ - UINT8 SerialIoSpiMode[3]; - -/** Offset 0x0198 - SPIn Default Chip Select Output - Sets Default CS as Output. N represents controller index: SPI0, SPI1, ... Available - options: 0:CS0, 1:CS1 -**/ - UINT8 SerialIoSpiDefaultCsOutput[3]; - -/** Offset 0x019B - PCH SerialIo I2C Pads Termination - 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up, - 0x19: 20kOhm weak pull-up - Enable/disable SerialIo I2C0,I2C1,I2C2,I2C3,I2C4,I2C5 - pads termination respectively. One byte for each controller, byte0 for I2C0, byte1 - for I2C1, and so on. -**/ - UINT8 PchSerialIoI2cPadsTermination[6]; - -/** Offset 0x01A1 - I2Cn Device Mode - Selects I2c operation mode. N represents controller index: I2c0, I2c1, ... Available - modes: 0:SerialIoI2cDisabled, 1:SerialIoI2cPci, 2:SerialIoI2cHidden -**/ - UINT8 SerialIoI2cMode[6]; - -/** Offset 0x01A7 - UARTn Device Mode - Selects Uart operation mode. N represents controller index: Uart0, Uart1, ... Available - modes: 0:SerialIoUartDisabled, 1:SerialIoUartPci, 2:SerialIoUartHidden, 3:SerialIoUartCom, - 4:SerialIoUartSkipInit -**/ - UINT8 SerialIoUartMode[3]; - -/** Offset 0x01AA -**/ - UINT8 UnusedUpdSpace9[2]; - -/** Offset 0x01AC - Default BaudRate for each Serial IO UART - Set default BaudRate Supported from 0 - default to 6000000 -**/ - UINT32 SerialIoUartBaudRate[3]; - -/** Offset 0x01B8 - Default ParityType for each Serial IO UART - Set default Parity. 0: DefaultParity, 1: NoParity, 2: EvenParity, 3: OddParity -**/ - UINT8 SerialIoUartParity[3]; - -/** Offset 0x01BB - Default DataBits for each Serial IO UART - Set default word length. 0: Default, 5,6,7,8 -**/ - UINT8 SerialIoUartDataBits[3]; - -/** Offset 0x01BE - Default StopBits for each Serial IO UART - Set default stop bits. 0: DefaultStopBits, 1: OneStopBit, 2: OneFiveStopBits, 3: - TwoStopBits -**/ - UINT8 SerialIoUartStopBits[3]; - -/** Offset 0x01C1 - Power Gating mode for each Serial IO UART that works in COM mode - Set Power Gating. 0: Disabled, 1: Enabled, 2: Auto -**/ - UINT8 SerialIoUartPowerGating[3]; - -/** Offset 0x01C4 - Enable Dma for each Serial IO UART that supports it - Set DMA/PIO mode. 0: Disabled, 1: Enabled -**/ - UINT8 SerialIoUartDmaEnable[3]; - -/** Offset 0x01C7 - Enables UART hardware flow control, CTS and RTS lines - Enables UART hardware flow control, CTS and RTS lines. -**/ - UINT8 SerialIoUartAutoFlow[3]; - -/** Offset 0x01CA - Serial IO UART Pin Mux - Applies only to UART0 muxed with CNVI 0 = GPIO C8 to C11 1 = GPIO F5 - - F7 (PCH LP) J5 - J7 (PCH H) -**/ - UINT8 SerialIoUartPinMux[3]; - -/** Offset 0x01CD - UART Number For Debug Purpose - UART number for debug purpose. 0:UART0, 1: UART1, 2:UART2. Note: If UART0 is selected - as CNVi BT Core interface, it cannot be used for debug purpose. - 0:UART0, 1:UART1, 2:UART2 -**/ - UINT8 SerialIoDebugUartNumber; - -/** Offset 0x01CE - Serial IO UART DBG2 table - Enable or disable Serial Io UART DBG2 table, default is Disable; 0: Disable; - 1: Enable. -**/ - UINT8 SerialIoUartDbg2[3]; - -/** Offset 0x01D1 - Enable eMMC Controller - Enable/disable eMMC Controller. - $EN_DIS -**/ - UINT8 ScsEmmcEnabled; - -/** Offset 0x01D2 - Enable eMMC HS400 Mode - Enable eMMC HS400 Mode. - $EN_DIS -**/ - UINT8 ScsEmmcHs400Enabled; - -/** Offset 0x01D3 - Enable SdCard Controller - Enable/disable SD Card Controller. - $EN_DIS -**/ - UINT8 ScsSdCardEnabled; - -/** Offset 0x01D4 - Show SPI controller - Enable/disable to show SPI controller. - $EN_DIS -**/ - UINT8 ShowSpiController; - -/** Offset 0x01D5 - Enable SATA SALP Support - Enable/disable SATA Aggressive Link Power Management. - $EN_DIS -**/ - UINT8 SataSalpSupport; - -/** Offset 0x01D6 - Enable SATA ports - Enable/disable SATA ports. One byte for each port, byte0 for port0, byte1 for port1, - and so on. -**/ - UINT8 SataPortsEnable[8]; - -/** Offset 0x01DE - Enable SATA DEVSLP Feature - Enable/disable SATA DEVSLP per port. 0 is disable, 1 is enable. One byte for each - port, byte0 for port0, byte1 for port1, and so on. -**/ - UINT8 SataPortsDevSlp[8]; - -/** Offset 0x01E6 - Enable USB2 ports - Enable/disable per USB2 ports. One byte for each port, byte0 for port0, byte1 for - port1, and so on. -**/ - UINT8 PortUsb20Enable[16]; - -/** Offset 0x01F6 - Enable USB3 ports - Enable/disable per USB3 ports. One byte for each port, byte0 for port0, byte1 for - port1, and so on. -**/ - UINT8 PortUsb30Enable[10]; - -/** Offset 0x0200 - Enable xDCI controller - Enable/disable to xDCI controller. - $EN_DIS -**/ - UINT8 XdciEnable; - -/** Offset 0x0201 -**/ - UINT8 UnusedUpdSpace10[3]; - -/** Offset 0x0204 - Address of PCH_DEVICE_INTERRUPT_CONFIG table. - The address of the table of PCH_DEVICE_INTERRUPT_CONFIG. -**/ - UINT32 DevIntConfigPtr; - -/** Offset 0x0208 - Number of DevIntConfig Entry - Number of Device Interrupt Configuration Entry. If this is not zero, the DevIntConfigPtr - must not be NULL. -**/ - UINT8 NumOfDevIntConfig; - -/** Offset 0x0209 - PIRQx to IRQx Map Config - PIRQx to IRQx mapping. The valid value is 0x00 to 0x0F for each. First byte is for - PIRQA, second byte is for PIRQB, and so on. The setting is only available in Legacy - 8259 PCI mode. -**/ - UINT8 PxRcConfig[8]; - -/** Offset 0x0211 - Select GPIO IRQ Route - GPIO IRQ Select. The valid value is 14 or 15. -**/ - UINT8 GpioIrqRoute; - -/** Offset 0x0212 - Select SciIrqSelect - SCI IRQ Select. The valid value is 9, 10, 11, and 20, 21, 22, 23 for APIC only. -**/ - UINT8 SciIrqSelect; - -/** Offset 0x0213 - Select TcoIrqSelect - TCO IRQ Select. The valid value is 9, 10, 11, 20, 21, 22, 23. -**/ - UINT8 TcoIrqSelect; - -/** Offset 0x0214 - Enable/Disable Tco IRQ - Enable/disable TCO IRQ - $EN_DIS -**/ - UINT8 TcoIrqEnable; - -/** Offset 0x0215 - PCH HDA Verb Table Entry Number - Number of Entries in Verb Table. -**/ - UINT8 PchHdaVerbTableEntryNum; - -/** Offset 0x0216 -**/ - UINT8 UnusedUpdSpace11[2]; - -/** Offset 0x0218 - PCH HDA Verb Table Pointer - Pointer to Array of pointers to Verb Table. -**/ - UINT32 PchHdaVerbTablePtr; - -/** Offset 0x021C - PCH HDA Codec Sx Wake Capability - Capability to detect wake initiated by a codec in Sx -**/ - UINT8 PchHdaCodecSxWakeCapability; - -/** Offset 0x021D - Enable SATA - Enable/disable SATA controller. - $EN_DIS -**/ - UINT8 SataEnable; - -/** Offset 0x021E - SATA Mode - Select SATA controller working mode. - 0:AHCI, 1:RAID -**/ - UINT8 SataMode; - -/** Offset 0x021F - USB Per Port HS Preemphasis Bias - USB Per Port HS Preemphasis Bias. 000b-0mV, 001b-11.25mV, 010b-16.9mV, 011b-28.15mV, - 100b-28.15mV, 101b-39.35mV, 110b-45mV, 111b-56.3mV. One byte for each port. -**/ - UINT8 Usb2AfePetxiset[16]; - -/** Offset 0x022F - USB Per Port HS Transmitter Bias - USB Per Port HS Transmitter Bias. 000b-0mV, 001b-11.25mV, 010b-16.9mV, 011b-28.15mV, - 100b-28.15mV, 101b-39.35mV, 110b-45mV, 111b-56.3mV, One byte for each port. -**/ - UINT8 Usb2AfeTxiset[16]; - -/** Offset 0x023F - USB Per Port HS Transmitter Emphasis - USB Per Port HS Transmitter Emphasis. 00b - Emphasis OFF, 01b - De-emphasis ON, - 10b - Pre-emphasis ON, 11b - Pre-emphasis & De-emphasis ON. One byte for each port. -**/ - UINT8 Usb2AfePredeemp[16]; - -/** Offset 0x024F - USB Per Port Half Bit Pre-emphasis - USB Per Port Half Bit Pre-emphasis. 1b - half-bit pre-emphasis, 0b - full-bit pre-emphasis. - One byte for each port. -**/ - UINT8 Usb2AfePehalfbit[16]; - -/** Offset 0x025F - Enable the write to USB 3.0 TX Output -3.5dB De-Emphasis Adjustment - Enable the write to USB 3.0 TX Output -3.5dB De-Emphasis Adjustment. Each value - in arrary can be between 0-1. One byte for each port. -**/ - UINT8 Usb3HsioTxDeEmphEnable[10]; - -/** Offset 0x0269 - USB 3.0 TX Output -3.5dB De-Emphasis Adjustment Setting - USB 3.0 TX Output -3.5dB De-Emphasis Adjustment Setting, HSIO_TX_DWORD5[21:16], - Default = 29h (approximately -3.5dB De-Emphasis). One byte for each port. -**/ - UINT8 Usb3HsioTxDeEmph[10]; - -/** Offset 0x0273 - Enable the write to USB 3.0 TX Output Downscale Amplitude Adjustment - Enable the write to USB 3.0 TX Output Downscale Amplitude Adjustment, Each value - in arrary can be between 0-1. One byte for each port. -**/ - UINT8 Usb3HsioTxDownscaleAmpEnable[10]; - -/** Offset 0x027D - USB 3.0 TX Output Downscale Amplitude Adjustment - USB 3.0 TX Output Downscale Amplitude Adjustment, HSIO_TX_DWORD8[21:16], Default - = 00h. One byte for each port. -**/ - UINT8 Usb3HsioTxDownscaleAmp[10]; - -/** Offset 0x0287 - Enable xHCI LTR override - Enables override of recommended LTR values for xHCI - $EN_DIS -**/ - UINT8 PchUsbLtrOverrideEnable; - -/** Offset 0x0288 - xHCI High Idle Time LTR override - Value used for overriding LTR recommendation for xHCI High Idle Time LTR setting -**/ - UINT32 PchUsbLtrHighIdleTimeOverride; - -/** Offset 0x028C - xHCI Medium Idle Time LTR override - Value used for overriding LTR recommendation for xHCI Medium Idle Time LTR setting -**/ - UINT32 PchUsbLtrMediumIdleTimeOverride; - -/** Offset 0x0290 - xHCI Low Idle Time LTR override - Value used for overriding LTR recommendation for xHCI Low Idle Time LTR setting -**/ - UINT32 PchUsbLtrLowIdleTimeOverride; - -/** Offset 0x0294 - Enable LAN - Enable/disable LAN controller. - $EN_DIS -**/ - UINT8 PchLanEnable; - -/** Offset 0x0295 - Enable HD Audio Link - Enable/disable HD Audio Link. Muxed with SSP0/SSP1/SNDW1. - $EN_DIS -**/ - UINT8 PchHdaAudioLinkHda; - -/** Offset 0x0296 - Enable HD Audio DMIC0 Link - Enable/disable HD Audio DMIC0 link. Muxed with SNDW4. - $EN_DIS -**/ - UINT8 PchHdaAudioLinkDmic0; - -/** Offset 0x0297 - Enable HD Audio DMIC1 Link - Enable/disable HD Audio DMIC1 link. Muxed with SNDW3. - $EN_DIS -**/ - UINT8 PchHdaAudioLinkDmic1; - -/** Offset 0x0298 - Enable HD Audio SSP0 Link - Enable/disable HD Audio SSP0/I2S link. Muxed with HDA. - $EN_DIS -**/ - UINT8 PchHdaAudioLinkSsp0; - -/** Offset 0x0299 - Enable HD Audio SSP1 Link - Enable/disable HD Audio SSP1/I2S link. Muxed with HDA/SNDW2. - $EN_DIS -**/ - UINT8 PchHdaAudioLinkSsp1; - -/** Offset 0x029A - Enable HD Audio SSP2 Link - Enable/disable HD Audio SSP2/I2S link. - $EN_DIS -**/ - UINT8 PchHdaAudioLinkSsp2; - -/** Offset 0x029B - Enable HD Audio SoundWire#1 Link - Enable/disable HD Audio SNDW1 link. Muxed with HDA. - $EN_DIS -**/ - UINT8 PchHdaAudioLinkSndw1; - -/** Offset 0x029C - Enable HD Audio SoundWire#2 Link - Enable/disable HD Audio SNDW2 link. Muxed with SSP1. - $EN_DIS -**/ - UINT8 PchHdaAudioLinkSndw2; - -/** Offset 0x029D - Enable HD Audio SoundWire#3 Link - Enable/disable HD Audio SNDW3 link. Muxed with DMIC1. - $EN_DIS -**/ - UINT8 PchHdaAudioLinkSndw3; - -/** Offset 0x029E - Enable HD Audio SoundWire#4 Link - Enable/disable HD Audio SNDW4 link. Muxed with DMIC0. - $EN_DIS -**/ - UINT8 PchHdaAudioLinkSndw4; - -/** Offset 0x029F - Soundwire Clock Buffer GPIO RCOMP Setting - 0: non-ACT - 50 Ohm driver impedance, 1: ACT - 8 Ohm driver impedance. - $EN_DIS -**/ - UINT8 PchHdaSndwBufferRcomp; - -/** Offset 0x02A0 - PTM for PCIE RP Mask - Enable/disable Precision Time Measurement for PCIE Root Ports. 0: disable, 1: enable. - One bit for each port, bit0 for port1, bit1 for port2, and so on. -**/ - UINT32 PcieRpPtmMask; - -/** Offset 0x02A4 - DPC for PCIE RP Mask - Enable/disable Downstream Port Containment for PCIE Root Ports. 0: disable, 1: enable. - One bit for each port, bit0 for port1, bit1 for port2, and so on. -**/ - UINT32 PcieRpDpcMask; - -/** Offset 0x02A8 - DPC Extensions PCIE RP Mask - Enable/disable DPC Extensions for PCIE Root Ports. 0: disable, 1: enable. One bit - for each port, bit0 for port1, bit1 for port2, and so on. -**/ - UINT32 PcieRpDpcExtensionsMask; - -/** Offset 0x02AC - USB PDO Programming - Enable/disable PDO programming for USB in PEI phase. Disabling will allow for programming - during later phase. 1: enable, 0: disable - $EN_DIS -**/ - UINT8 UsbPdoProgramming; - -/** Offset 0x02AD -**/ - UINT8 UnusedUpdSpace12[3]; - -/** Offset 0x02B0 - Power button debounce configuration - Debounce time for PWRBTN in microseconds. For values not supported by HW, they will - be rounded down to closest supported on. 0: disable, 250-1024000us: supported range -**/ - UINT32 PmcPowerButtonDebounce; - -/** Offset 0x02B4 - PCH eSPI Master and Slave BME enabled - PCH eSPI Master and Slave BME enabled - $EN_DIS -**/ - UINT8 PchEspiBmeMasterSlaveEnabled; - -/** Offset 0x02B5 - PCH SATA use RST Legacy OROM - Use PCH SATA RST Legacy OROM when CSM is Enabled - $EN_DIS -**/ - UINT8 SataRstLegacyOrom; - -/** Offset 0x02B6 -**/ - UINT8 UnusedUpdSpace13[2]; - -/** Offset 0x02B8 - Trace Hub Memory Base - If Trace Hub is enabled and trace to memory is desired, BootLoader needs to allocate - trace hub memory as reserved and uncacheable, set the base to ensure Trace Hub - memory is configured properly. -**/ - UINT32 TraceHubMemBase; - -/** Offset 0x02BC - PMC Debug Message Enable - When Enabled, PMC HW will send debug messages to trace hub; When Disabled, PMC HW - will never send debug meesages to trace hub. Noted: When Enabled, may not enter S0ix - $EN_DIS -**/ - UINT8 PmcDbgMsgEn; - -/** Offset 0x02BD -**/ - UINT8 UnusedUpdSpace14[3]; - -/** Offset 0x02C0 - Pointer of ChipsetInit Binary - ChipsetInit Binary Pointer. -**/ - UINT32 ChipsetInitBinPtr; - -/** Offset 0x02C4 - Length of ChipsetInit Binary - ChipsetInit Binary Length. -**/ - UINT32 ChipsetInitBinLen; - -/** Offset 0x02C8 - Enable Ufs Controller - Enable/disable Ufs 2.0 Controller. - $EN_DIS -**/ - UINT8 ScsUfsEnabled; - -/** Offset 0x02C9 - CNVi Configuration - This option allows for automatic detection of Connectivity Solution. [Auto Detection] - assumes that CNVi will be enabled when available, [Disable] allows for disabling CNVi. - 0:Disable, 1:Auto -**/ - UINT8 CnviMode; - -/** Offset 0x02CA - CNVi BT Core - Enable/Disable CNVi BT Core, Default is ENABLE. 0: DISABLE, 1: ENABLE - $EN_DIS -**/ - UINT8 CnviBtCore; - -/** Offset 0x02CB - CNVi BT Audio Offload - Enable/Disable BT Audio Offload, Default is DISABLE. 0: DISABLE, 1: ENABLE - $EN_DIS -**/ - UINT8 CnviBtAudioOffload; - -/** Offset 0x02CC - SdCard power enable polarity - Choose SD_PWREN# polarity - 0: Active low, 1: Active high -**/ - UINT8 SdCardPowerEnableActiveHigh; - -/** Offset 0x02CD - PCH USB2 PHY Power Gating enable - 1: Will enable USB2 PHY SUS Well Power Gating, 0: Will not enable PG of USB2 PHY - Sus Well PG - $EN_DIS -**/ - UINT8 PchUsb2PhySusPgEnable; - -/** Offset 0x02CE - PCH USB OverCurrent mapping enable - 1: Will program USB OC pin mapping in xHCI controller memory, 0: Will clear OC pin - mapping allow for NOA usage of OC pins - $EN_DIS -**/ - UINT8 PchUsbOverCurrentEnable; - -/** Offset 0x02CF - Espi Lgmr Memory Range decode - This option enables or disables espi lgmr - $EN_DIS -**/ - UINT8 PchEspiLgmrEnable; - -/** Offset 0x02D0 - PCHHOT# pin - Enable PCHHOT# pin assertion when temperature is higher than PchHotLevel. 0: disable, 1: enable - $EN_DIS -**/ - UINT8 PchHotEnable; - -/** Offset 0x02D1 - SATA LED - SATA LED indicating SATA controller activity. 0: disable, 1: enable - $EN_DIS -**/ - UINT8 SataLedEnable; - -/** Offset 0x02D2 - VRAlert# Pin - When VRAlert# feature pin is enabled and its state is '0', the PMC requests throttling - to a T3 Tstate to the PCH throttling unit.. 0: disable, 1: enable - $EN_DIS -**/ - UINT8 PchPmVrAlert; - -/** Offset 0x02D3 - SLP_S0 VM Dynamic Control - SLP_S0 Voltage Margining Runtime Control Policy. 0: disable, 1: enable - $EN_DIS -**/ - UINT8 PchPmSlpS0VmRuntimeControl; - -/** Offset 0x02D4 - SLP_S0 VM 0.70V Support - SLP_S0 Voltage Margining 0.70V Support Policy. 0: disable, 1: enable - $EN_DIS -**/ - UINT8 PchPmSlpS0Vm070VSupport; - -/** Offset 0x02D5 - SLP_S0 VM 0.75V Support - SLP_S0 Voltage Margining 0.75V Support Policy. 0: disable, 1: enable - $EN_DIS -**/ - UINT8 PchPmSlpS0Vm075VSupport; - -/** Offset 0x02D6 - PCH PCIe root port connection type - 0: built-in device, 1:slot -**/ - UINT8 PcieRpSlotImplemented[24]; - -/** Offset 0x02EE - Usage type for ClkSrc - 0-23: PCH rootport, 0x40-0x43: PEG port, 0x70:LAN, 0x80: unspecified but in use - (free running), 0xFF: not used -**/ - UINT8 PcieClkSrcUsage[16]; - -/** Offset 0x02FE - ClkReq-to-ClkSrc mapping - Number of ClkReq signal assigned to ClkSrc -**/ - UINT8 PcieClkSrcClkReq[16]; - -/** Offset 0x030E - PCIE RP Access Control Services Extended Capability - Enable/Disable PCIE RP Access Control Services Extended Capability -**/ - UINT8 PcieRpAcsEnabled[24]; - -/** Offset 0x0326 - PCIE RP Clock Power Management - Enable/Disable PCIE RP Clock Power Management, even if disabled, CLKREQ# signal - can still be controlled by L1 PM substates mechanism -**/ - UINT8 PcieRpEnableCpm[24]; - -/** Offset 0x033E - PCIE RP Detect Timeout Ms - The number of milliseconds within 0~65535 in reference code will wait for link to - exit Detect state for enabled ports before assuming there is no device and potentially - disabling the port. -**/ - UINT16 PcieRpDetectTimeoutMs[24]; - -/** Offset 0x036E - ModPHY SUS Power Domain Dynamic Gating - Enable/Disable ModPHY SUS Power Domain Dynamic Gating. Setting not supported on - PCH-H. 0: disable, 1: enable - $EN_DIS -**/ - UINT8 PmcModPhySusPgEnable; - -/** Offset 0x036F - SlpS0WithGbeSupport - Enable/Disable SLP_S0 with GBE Support. Default is 0 for PCH-LP, WHL V0 Stepping - CPU and 1 for PCH-H Series. 0: Disable, 1: Enable - $EN_DIS -**/ - UINT8 SlpS0WithGbeSupport; - -/** Offset 0x0370 - Enable Power Optimizer - Enable DMI Power Optimizer on PCH side. - $EN_DIS -**/ - UINT8 PchPwrOptEnable; - -/** Offset 0x0371 - PCH Flash Protection Ranges Write Enble - Write or erase is blocked by hardware. -**/ - UINT8 PchWriteProtectionEnable[5]; - -/** Offset 0x0376 - PCH Flash Protection Ranges Read Enble - Read is blocked by hardware. -**/ - UINT8 PchReadProtectionEnable[5]; - -/** Offset 0x037B -**/ - UINT8 UnusedUpdSpace15[1]; - -/** Offset 0x037C - PCH Protect Range Limit - Left shifted address by 12 bits with address bits 11:0 are assumed to be FFFh for - limit comparison. -**/ - UINT16 PchProtectedRangeLimit[5]; - -/** Offset 0x0386 - PCH Protect Range Base - Left shifted address by 12 bits with address bits 11:0 are assumed to be 0. -**/ - UINT16 PchProtectedRangeBase[5]; - -/** Offset 0x0390 - Enable Pme - Enable Azalia wake-on-ring. - $EN_DIS -**/ - UINT8 PchHdaPme; - -/** Offset 0x0391 - VC Type - Virtual Channel Type Select: 0: VC0, 1: VC1. - 0: VC0, 1: VC1 -**/ - UINT8 PchHdaVcType; - -/** Offset 0x0392 - HD Audio Link Frequency - HDA Link Freq (PCH_HDAUDIO_LINK_FREQUENCY enum): 0: 6MHz, 1: 12MHz, 2: 24MHz. - 0: 6MHz, 1: 12MHz, 2: 24MHz -**/ - UINT8 PchHdaLinkFrequency; - -/** Offset 0x0393 - iDisp-Link Frequency - iDisp-Link Freq (PCH_HDAUDIO_LINK_FREQUENCY enum): 4: 96MHz, 3: 48MHz. - 4: 96MHz, 3: 48MHz -**/ - UINT8 PchHdaIDispLinkFrequency; - -/** Offset 0x0394 - iDisp-Link T-mode - iDisp-Link T-Mode (PCH_HDAUDIO_IDISP_TMODE enum): 0: 2T, 1: 1T. - 0: 2T, 1: 1T -**/ - UINT8 PchHdaIDispLinkTmode; - -/** Offset 0x0395 - Universal Audio Architecture compliance for DSP enabled system - 0: Not-UAA Compliant (Intel SST driver supported only), 1: UAA Compliant (HDA Inbox - driver or SST driver supported). - $EN_DIS -**/ - UINT8 PchHdaDspUaaCompliance; - -/** Offset 0x0396 - iDisplay Audio Codec disconnection - 0: Not disconnected, enumerable, 1: Disconnected SDI, not enumerable. - $EN_DIS -**/ - UINT8 PchHdaIDispCodecDisconnect; - -/** Offset 0x0397 - USB LFPS Filter selection - For each byte bits 2:0 are for p, bits 4:6 are for n. 0h:1.6ns, 1h:2.4ns, 2h:3.2ns, - 3h:4.0ns, 4h:4.8ns, 5h:5.6ns, 6h:6.4ns. -**/ - UINT8 PchUsbHsioFilterSel[10]; - -/** Offset 0x03A1 - Enable PCH Io Apic Entry 24-119 - 0: Disable; 1: Enable. - $EN_DIS -**/ - UINT8 PchIoApicEntry24_119; - -/** Offset 0x03A2 - PCH Io Apic ID - This member determines IOAPIC ID. Default is 0x02. -**/ - UINT8 PchIoApicId; - -/** Offset 0x03A3 - Enable PCH ISH SPI GPIO pins assigned - 0: Disable; 1: Enable. - $EN_DIS -**/ - UINT8 PchIshSpiGpioAssign; - -/** Offset 0x03A4 - Enable PCH ISH UART0 GPIO pins assigned - 0: Disable; 1: Enable. - $EN_DIS -**/ - UINT8 PchIshUart0GpioAssign; - -/** Offset 0x03A5 - Enable PCH ISH UART1 GPIO pins assigned - 0: Disable; 1: Enable. - $EN_DIS -**/ - UINT8 PchIshUart1GpioAssign; - -/** Offset 0x03A6 - Enable PCH ISH I2C0 GPIO pins assigned - 0: Disable; 1: Enable. - $EN_DIS -**/ - UINT8 PchIshI2c0GpioAssign; - -/** Offset 0x03A7 - Enable PCH ISH I2C1 GPIO pins assigned - 0: Disable; 1: Enable. - $EN_DIS -**/ - UINT8 PchIshI2c1GpioAssign; - -/** Offset 0x03A8 - Enable PCH ISH I2C2 GPIO pins assigned - 0: Disable; 1: Enable. - $EN_DIS -**/ - UINT8 PchIshI2c2GpioAssign; - -/** Offset 0x03A9 - Enable PCH ISH GP_0 GPIO pin assigned - 0: Disable; 1: Enable. - $EN_DIS -**/ - UINT8 PchIshGp0GpioAssign; - -/** Offset 0x03AA - Enable PCH ISH GP_1 GPIO pin assigned - 0: Disable; 1: Enable. - $EN_DIS -**/ - UINT8 PchIshGp1GpioAssign; - -/** Offset 0x03AB - Enable PCH ISH GP_2 GPIO pin assigned - 0: Disable; 1: Enable. - $EN_DIS -**/ - UINT8 PchIshGp2GpioAssign; - -/** Offset 0x03AC - Enable PCH ISH GP_3 GPIO pin assigned - 0: Disable; 1: Enable. - $EN_DIS -**/ - UINT8 PchIshGp3GpioAssign; - -/** Offset 0x03AD - Enable PCH ISH GP_4 GPIO pin assigned - 0: Disable; 1: Enable. - $EN_DIS -**/ - UINT8 PchIshGp4GpioAssign; - -/** Offset 0x03AE - Enable PCH ISH GP_5 GPIO pin assigned - 0: Disable; 1: Enable. - $EN_DIS -**/ - UINT8 PchIshGp5GpioAssign; - -/** Offset 0x03AF - Enable PCH ISH GP_6 GPIO pin assigned - 0: Disable; 1: Enable. - $EN_DIS -**/ - UINT8 PchIshGp6GpioAssign; - -/** Offset 0x03B0 - Enable PCH ISH GP_7 GPIO pin assigned - 0: Disable; 1: Enable. - $EN_DIS -**/ - UINT8 PchIshGp7GpioAssign; - -/** Offset 0x03B1 - PCH ISH PDT Unlock Msg - 0: False; 1: True. - $EN_DIS -**/ - UINT8 PchIshPdtUnlock; - -/** Offset 0x03B2 - Enable PCH Lan LTR capabilty of PCH internal LAN - 0: Disable; 1: Enable. - $EN_DIS -**/ - UINT8 PchLanLtrEnable; - -/** Offset 0x03B3 - Enable LOCKDOWN BIOS LOCK - Enable the BIOS Lock feature and set EISS bit (D31:F5:RegDCh[5]) for the BIOS region - protection. - $EN_DIS -**/ - UINT8 PchLockDownBiosLock; - -/** Offset 0x03B4 - PCH Compatibility Revision ID - This member describes whether or not the CRID feature of PCH should be enabled. - $EN_DIS -**/ - UINT8 PchCrid; - -/** Offset 0x03B5 - RTC CMOS MEMORY LOCK - Enable RTC lower and upper 128 byte Lock bits to lock Bytes 38h-3Fh in the upper - and and lower 128-byte bank of RTC RAM. - $EN_DIS -**/ - UINT8 PchLockDownRtcMemoryLock; - -/** Offset 0x03B6 - Enable PCIE RP HotPlug - Indicate whether the root port is hot plug available. -**/ - UINT8 PcieRpHotPlug[24]; - -/** Offset 0x03CE - Enable PCIE RP Pm Sci - Indicate whether the root port power manager SCI is enabled. -**/ - UINT8 PcieRpPmSci[24]; - -/** Offset 0x03E6 - Enable PCIE RP Ext Sync - Indicate whether the extended synch is enabled. -**/ - UINT8 PcieRpExtSync[24]; - -/** Offset 0x03FE - Enable PCIE RP Transmitter Half Swing - Indicate whether the Transmitter Half Swing is enabled. -**/ - UINT8 PcieRpTransmitterHalfSwing[24]; - -/** Offset 0x0416 - Enable PCIE RP Clk Req Detect - Probe CLKREQ# signal before enabling CLKREQ# based power management. -**/ - UINT8 PcieRpClkReqDetect[24]; - -/** Offset 0x042E - PCIE RP Advanced Error Report - Indicate whether the Advanced Error Reporting is enabled. -**/ - UINT8 PcieRpAdvancedErrorReporting[24]; - -/** Offset 0x0446 - PCIE RP Unsupported Request Report - Indicate whether the Unsupported Request Report is enabled. -**/ - UINT8 PcieRpUnsupportedRequestReport[24]; - -/** Offset 0x045E - PCIE RP Fatal Error Report - Indicate whether the Fatal Error Report is enabled. -**/ - UINT8 PcieRpFatalErrorReport[24]; - -/** Offset 0x0476 - PCIE RP No Fatal Error Report - Indicate whether the No Fatal Error Report is enabled. -**/ - UINT8 PcieRpNoFatalErrorReport[24]; - -/** Offset 0x048E - PCIE RP Correctable Error Report - Indicate whether the Correctable Error Report is enabled. -**/ - UINT8 PcieRpCorrectableErrorReport[24]; - -/** Offset 0x04A6 - PCIE RP System Error On Fatal Error - Indicate whether the System Error on Fatal Error is enabled. -**/ - UINT8 PcieRpSystemErrorOnFatalError[24]; - -/** Offset 0x04BE - PCIE RP System Error On Non Fatal Error - Indicate whether the System Error on Non Fatal Error is enabled. -**/ - UINT8 PcieRpSystemErrorOnNonFatalError[24]; - -/** Offset 0x04D6 - PCIE RP System Error On Correctable Error - Indicate whether the System Error on Correctable Error is enabled. -**/ - UINT8 PcieRpSystemErrorOnCorrectableError[24]; - -/** Offset 0x04EE - PCIE RP Max Payload - Max Payload Size supported, Default 128B, see enum PCH_PCIE_MAX_PAYLOAD. -**/ - UINT8 PcieRpMaxPayload[24]; - -/** Offset 0x0506 - PCH USB3 RX HSIO Tuning parameters - Bits 7:3 are for Signed Magnatude number added to the CTLE code, Bits 2:0 are for - controlling the input offset -**/ - UINT8 PchUsbHsioRxTuningParameters[10]; - -/** Offset 0x0510 - PCH USB3 HSIO Rx Tuning Enable - Mask for enabling tuning of HSIO Rx signals of USB3 ports. Bits: 0 - HsioCtrlAdaptOffsetCfgEnable, - 1 - HsioFilterSelNEnable, 2 - HsioFilterSelPEnable, 3 - HsioOlfpsCfgPullUpDwnResEnable -**/ - UINT8 PchUsbHsioRxTuningEnable[10]; - -/** Offset 0x051A - PCIE RP Pcie Speed - Determines each PCIE Port speed capability. 0: Auto; 1: Gen1; 2: Gen2; 3: Gen3 (see: - PCH_PCIE_SPEED). -**/ - UINT8 PcieRpPcieSpeed[24]; - -/** Offset 0x0532 - PCIE RP Gen3 Equalization Phase Method - PCIe Gen3 Eq Ph3 Method (see PCH_PCIE_EQ_METHOD). 0: DEPRECATED, hardware equalization; - 1: hardware equalization; 4: Fixed Coeficients. -**/ - UINT8 PcieRpGen3EqPh3Method[24]; - -/** Offset 0x054A - PCIE RP Physical Slot Number - Indicates the slot number for the root port. Default is the value as root port index. -**/ - UINT8 PcieRpPhysicalSlotNumber[24]; - -/** Offset 0x0562 - PCIE RP Completion Timeout - The root port completion timeout(see: PCH_PCIE_COMPLETION_TIMEOUT). Default is PchPcieCompletionTO_Default. -**/ - UINT8 PcieRpCompletionTimeout[24]; - -/** Offset 0x057A - PCIE RP Aspm - The ASPM configuration of the root port (see: PCH_PCIE_ASPM_CONTROL). Default is - PchPcieAspmAutoConfig. -**/ - UINT8 PcieRpAspm[24]; - -/** Offset 0x0592 - PCIE RP L1 Substates - The L1 Substates configuration of the root port (see: PCH_PCIE_L1SUBSTATES_CONTROL). - Default is PchPcieL1SubstatesL1_1_2. -**/ - UINT8 PcieRpL1Substates[24]; - -/** Offset 0x05AA - PCIE RP Ltr Enable - Latency Tolerance Reporting Mechanism. -**/ - UINT8 PcieRpLtrEnable[24]; - -/** Offset 0x05C2 - PCIE RP Ltr Config Lock - 0: Disable; 1: Enable. -**/ - UINT8 PcieRpLtrConfigLock[24]; - -/** Offset 0x05DA - PCIE Eq Ph3 Lane Param Cm - PCH_PCIE_EQ_LANE_PARAM. Coefficient C-1. -**/ - UINT8 PcieEqPh3LaneParamCm[24]; - -/** Offset 0x05F2 - PCIE Eq Ph3 Lane Param Cp - PCH_PCIE_EQ_LANE_PARAM. Coefficient C+1. -**/ - UINT8 PcieEqPh3LaneParamCp[24]; - -/** Offset 0x060A - PCIE Sw Eq CoeffList Cm - PCH_PCIE_EQ_PARAM. Coefficient C-1. The values depend on PcieNumOfCoefficients, - the default value of PcieNumOfCoefficients is 3 hence only first 3 values are considered. -**/ - UINT8 PcieSwEqCoeffListCm[5]; - -/** Offset 0x060F - PCIE Sw Eq CoeffList Cp - PCH_PCIE_EQ_PARAM. Coefficient C+1.The values depend on PcieNumOfCoefficients, the - default value of PcieNumOfCoefficients is 3 hence only first 3 values are considered. -**/ - UINT8 PcieSwEqCoeffListCp[5]; - -/** Offset 0x0614 - PCIE Disable RootPort Clock Gating - Describes whether the PCI Express Clock Gating for each root port is enabled by - platform modules. 0: Disable; 1: Enable. - $EN_DIS -**/ - UINT8 PcieDisableRootPortClockGating; - -/** Offset 0x0615 - PCIE Enable Peer Memory Write - This member describes whether Peer Memory Writes are enabled on the platform. - $EN_DIS -**/ - UINT8 PcieEnablePeerMemoryWrite; - -/** Offset 0x0616 - PCIE Compliance Test Mode - Compliance Test Mode shall be enabled when using Compliance Load Board. - $EN_DIS -**/ - UINT8 PcieComplianceTestMode; - -/** Offset 0x0617 - PCIE Rp Function Swap - Allows BIOS to use root port function number swapping when root port of function - 0 is disabled. - $EN_DIS -**/ - UINT8 PcieRpFunctionSwap; - -/** Offset 0x0618 - Teton Glacier Cycle Router - Specify to which cycle router Teton Glacier is connected, it is valid only when - Teton Glacier support is enabled. Default is 0 for CNP-H system and 1 for CNP-LP system -**/ - UINT8 TetonGlacierCR; - -/** Offset 0x0619 - PCH Pm PME_B0_S5_DIS - When cleared (default), wake events from PME_B0_STS are allowed in S5 if PME_B0_EN = 1. - $EN_DIS -**/ - UINT8 PchPmPmeB0S5Dis; - -/** Offset 0x061A - PCIE IMR - Enables Isolated Memory Region for PCIe. - $EN_DIS -**/ - UINT8 PcieRpImrEnabled; - -/** Offset 0x061B - PCIE IMR port number - Selects PCIE root port number for IMR feature. -**/ - UINT8 PcieRpImrSelection; - -/** Offset 0x061C - Teton Glacier Detection and Configuration Mode - Enables support for Teton Glacier hybrid storage device. 0: Disabled; 1: Dynamic - Configuration. Default is 0: Disabled - 0: Disabled, 1: Dynamic Configuration -**/ - UINT8 TetonGlacierMode; - -/** Offset 0x061D - PCH Pm Wol Enable Override - Corresponds to the WOL Enable Override bit in the General PM Configuration B (GEN_PMCON_B) register. - $EN_DIS -**/ - UINT8 PchPmWolEnableOverride; - -/** Offset 0x061E - PCH Pm Pcie Wake From DeepSx - Determine if enable PCIe to wake from deep Sx. - $EN_DIS -**/ - UINT8 PchPmPcieWakeFromDeepSx; - -/** Offset 0x061F - PCH Pm WoW lan Enable - Determine if WLAN wake from Sx, corresponds to the HOST_WLAN_PP_EN bit in the PWRM_CFG3 register. - $EN_DIS -**/ - UINT8 PchPmWoWlanEnable; - -/** Offset 0x0620 - PCH Pm WoW lan DeepSx Enable - Determine if WLAN wake from DeepSx, corresponds to the DSX_WLAN_PP_EN bit in the - PWRM_CFG3 register. - $EN_DIS -**/ - UINT8 PchPmWoWlanDeepSxEnable; - -/** Offset 0x0621 - PCH Pm Lan Wake From DeepSx - Determine if enable LAN to wake from deep Sx. - $EN_DIS -**/ - UINT8 PchPmLanWakeFromDeepSx; - -/** Offset 0x0622 - PCH Pm Deep Sx Pol - Deep Sx Policy. - $EN_DIS -**/ - UINT8 PchPmDeepSxPol; - -/** Offset 0x0623 - PCH Pm Slp S3 Min Assert - SLP_S3 Minimum Assertion Width Policy. Default is PchSlpS350ms. -**/ - UINT8 PchPmSlpS3MinAssert; - -/** Offset 0x0624 - PCH Pm Slp S4 Min Assert - SLP_S4 Minimum Assertion Width Policy. Default is PchSlpS44s. -**/ - UINT8 PchPmSlpS4MinAssert; - -/** Offset 0x0625 - PCH Pm Slp Sus Min Assert - SLP_SUS Minimum Assertion Width Policy. Default is PchSlpSus4s. -**/ - UINT8 PchPmSlpSusMinAssert; - -/** Offset 0x0626 - PCH Pm Slp A Min Assert - SLP_A Minimum Assertion Width Policy. Default is PchSlpA2s. -**/ - UINT8 PchPmSlpAMinAssert; - -/** Offset 0x0627 - SLP_S0# Override - Select 'Auto', it will be auto-configured according to probe type. Select 'Enabled' - will disable SLP_S0# assertion whereas 'Disabled' will enable SLP_S0# assertion - when debug is enabled. \n - Note: This BIOS option should keep 'Auto', other options are intended for advanced - configuration only. - 0:Disabled, 1:Enabled, 2:Auto -**/ - UINT8 SlpS0Override; - -/** Offset 0x0628 - S0ix Override Settings - Select 'Auto', it will be auto-configured according to probe type. 'No Change' will - keep PMC default settings. Or select the desired debug probe type for S0ix Override - settings.\n - Reminder: DCI OOB (aka BSSB) uses CCA probe.\n - Note: This BIOS option should keep 'Auto', other options are intended for advanced - configuration only. - 0:No Change, 1:DCI OOB, 2:USB2 DbC, 3:Auto -**/ - UINT8 SlpS0DisQForDebug; - -/** Offset 0x0629 - USB Overcurrent Override for DbC - This option overrides USB Over Current enablement state that USB OC will be disabled - after enabling this option. Enable when DbC is used to avoid signaling conflicts. - $EN_DIS -**/ - UINT8 PchEnableDbcObs; - -/** Offset 0x062A - PCH Legacy IO Low Latency Enable - Set to enable low latency of legacy IO. 0: Disable, 1: Enable - $EN_DIS -**/ - UINT8 PchLegacyIoLowLatency; - -/** Offset 0x062B - PCH Pm Lpc Clock Run - This member describes whether or not the LPC ClockRun feature of PCH should be enabled. - Default value is Disabled - $EN_DIS -**/ - UINT8 PchPmLpcClockRun; - -/** Offset 0x062C - PCH Pm Slp Strch Sus Up - Enable SLP_X Stretching After SUS Well Power Up. - $EN_DIS -**/ - UINT8 PchPmSlpStrchSusUp; - -/** Offset 0x062D - PCH Pm Slp Lan Low Dc - Enable/Disable SLP_LAN# Low on DC Power. - $EN_DIS -**/ - UINT8 PchPmSlpLanLowDc; - -/** Offset 0x062E - PCH Pm Pwr Btn Override Period - PCH power button override period. 000b-4s, 001b-6s, 010b-8s, 011b-10s, 100b-12s, 101b-14s. -**/ - UINT8 PchPmPwrBtnOverridePeriod; - -/** Offset 0x062F - PCH Pm Disable Dsx Ac Present Pulldown - When Disable, PCH will internal pull down AC_PRESENT in deep SX and during G3 exit. - $EN_DIS -**/ - UINT8 PchPmDisableDsxAcPresentPulldown; - -/** Offset 0x0630 - PCH Pm Disable Native Power Button - Power button native mode disable. - $EN_DIS -**/ - UINT8 PchPmDisableNativePowerButton; - -/** Offset 0x0631 - PCH Pm Slp S0 Enable - Indicates whether SLP_S0# is to be asserted when PCH reaches idle state. - $EN_DIS -**/ - UINT8 PchPmSlpS0Enable; - -/** Offset 0x0632 - PCH Pm ME_WAKE_STS - Clear the ME_WAKE_STS bit in the Power and Reset Status (PRSTS) register. - $EN_DIS -**/ - UINT8 PchPmMeWakeSts; - -/** Offset 0x0633 - PCH Pm WOL_OVR_WK_STS - Clear the WOL_OVR_WK_STS bit in the Power and Reset Status (PRSTS) register. - $EN_DIS -**/ - UINT8 PchPmWolOvrWkSts; - -/** Offset 0x0634 - PCH Pm Reset Power Cycle Duration - Could be customized in the unit of second. Please refer to EDS for all support settings. - 0 is default, 1 is 1 second, 2 is 2 seconds, ... -**/ - UINT8 PchPmPwrCycDur; - -/** Offset 0x0635 - PCH Pm Pcie Pll Ssc - Specifies the Pcie Pll Spread Spectrum Percentage. The default is 0xFF: AUTO - No - BIOS override. -**/ - UINT8 PchPmPciePllSsc; - -/** Offset 0x0636 - PCH Sata Pwr Opt Enable - SATA Power Optimizer on PCH side. - $EN_DIS -**/ - UINT8 SataPwrOptEnable; - -/** Offset 0x0637 - PCH Sata eSATA Speed Limit - When enabled, BIOS will configure the PxSCTL.SPD to 2 to limit the eSATA port speed. - $EN_DIS -**/ - UINT8 EsataSpeedLimit; - -/** Offset 0x0638 - PCH Sata Speed Limit - Indicates the maximum speed the SATA controller can support 0h: PchSataSpeedDefault. -**/ - UINT8 SataSpeedLimit; - -/** Offset 0x0639 - Enable SATA Port HotPlug - Enable SATA Port HotPlug. -**/ - UINT8 SataPortsHotPlug[8]; - -/** Offset 0x0641 - Enable SATA Port Interlock Sw - Enable SATA Port Interlock Sw. -**/ - UINT8 SataPortsInterlockSw[8]; - -/** Offset 0x0649 - Enable SATA Port External - Enable SATA Port External. -**/ - UINT8 SataPortsExternal[8]; - -/** Offset 0x0651 - Enable SATA Port SpinUp - Enable the COMRESET initialization Sequence to the device. -**/ - UINT8 SataPortsSpinUp[8]; - -/** Offset 0x0659 - Enable SATA Port Solid State Drive - 0: HDD; 1: SSD. -**/ - UINT8 SataPortsSolidStateDrive[8]; - -/** Offset 0x0661 - Enable SATA Port Enable Dito Config - Enable DEVSLP Idle Timeout settings (DmVal, DitoVal). -**/ - UINT8 SataPortsEnableDitoConfig[8]; - -/** Offset 0x0669 - Enable SATA Port DmVal - DITO multiplier. Default is 15. -**/ - UINT8 SataPortsDmVal[8]; - -/** Offset 0x0671 -**/ - UINT8 UnusedUpdSpace16[1]; - -/** Offset 0x0672 - Enable SATA Port DmVal - DEVSLP Idle Timeout (DITO), Default is 625. -**/ - UINT16 SataPortsDitoVal[8]; - -/** Offset 0x0682 - Enable SATA Port ZpOdd - Support zero power ODD. -**/ - UINT8 SataPortsZpOdd[8]; - -/** Offset 0x068A - PCH Sata Rst Raid Device Id - Enable RAID Alternate ID. - 0:Client, 1:Alternate, 2:Server -**/ - UINT8 SataRstRaidDeviceId; - -/** Offset 0x068B - PCH Sata Rst Raid0 - RAID0. - $EN_DIS -**/ - UINT8 SataRstRaid0; - -/** Offset 0x068C - PCH Sata Rst Raid1 - RAID1. - $EN_DIS -**/ - UINT8 SataRstRaid1; - -/** Offset 0x068D - PCH Sata Rst Raid10 - RAID10. - $EN_DIS -**/ - UINT8 SataRstRaid10; - -/** Offset 0x068E - PCH Sata Rst Raid5 - RAID5. - $EN_DIS -**/ - UINT8 SataRstRaid5; - -/** Offset 0x068F - PCH Sata Rst Irrt - Intel Rapid Recovery Technology. - $EN_DIS -**/ - UINT8 SataRstIrrt; - -/** Offset 0x0690 - PCH Sata Rst Orom Ui Banner - OROM UI and BANNER. - $EN_DIS -**/ - UINT8 SataRstOromUiBanner; - -/** Offset 0x0691 - PCH Sata Rst Orom Ui Delay - 00b: 2 secs; 01b: 4 secs; 10b: 6 secs; 11: 8 secs (see: PCH_SATA_OROM_DELAY). -**/ - UINT8 SataRstOromUiDelay; - -/** Offset 0x0692 - PCH Sata Rst Hdd Unlock - Indicates that the HDD password unlock in the OS is enabled. - $EN_DIS -**/ - UINT8 SataRstHddUnlock; - -/** Offset 0x0693 - PCH Sata Rst Led Locate - Indicates that the LED/SGPIO hardware is attached and ping to locate feature is - enabled on the OS. - $EN_DIS -**/ - UINT8 SataRstLedLocate; - -/** Offset 0x0694 - PCH Sata Rst Irrt Only - Allow only IRRT drives to span internal and external ports. - $EN_DIS -**/ - UINT8 SataRstIrrtOnly; - -/** Offset 0x0695 - PCH Sata Rst Smart Storage - RST Smart Storage caching Bit. - $EN_DIS -**/ - UINT8 SataRstSmartStorage; - -/** Offset 0x0696 - PCH Sata Rst Pcie Storage Remap enable - Enable Intel RST for PCIe Storage remapping. -**/ - UINT8 SataRstPcieEnable[3]; - -/** Offset 0x0699 - PCH Sata Rst Pcie Storage Port - Intel RST for PCIe Storage remapping - PCIe Port Selection (1-based, 0 = autodetect). -**/ - UINT8 SataRstPcieStoragePort[3]; - -/** Offset 0x069C - PCH Sata Rst Pcie Device Reset Delay - PCIe Storage Device Reset Delay in milliseconds. Default value is 100ms -**/ - UINT8 SataRstPcieDeviceResetDelay[3]; - -/** Offset 0x069F - Enable eMMC HS400 Training - Deprecated. - $EN_DIS -**/ - UINT8 PchScsEmmcHs400TuningRequired; - -/** Offset 0x06A0 - Set HS400 Tuning Data Valid - Deprecated - $EN_DIS -**/ - UINT8 PchScsEmmcHs400DllDataValid; - -/** Offset 0x06A1 - Rx Strobe Delay Control - Deprecated -**/ - UINT8 PchScsEmmcHs400RxStrobeDll1; - -/** Offset 0x06A2 - Tx Data Delay Control - Deprecated -**/ - UINT8 PchScsEmmcHs400TxDataDll; - -/** Offset 0x06A3 - I/O Driver Strength - Deprecated - 0:33 Ohm, 1:40 Ohm, 2:50 Ohm -**/ - UINT8 PchScsEmmcHs400DriverStrength; - -/** Offset 0x06A4 - Enable Serial IRQ - Determines if enable Serial IRQ. - $EN_DIS -**/ - UINT8 PchSirqEnable; - -/** Offset 0x06A5 - Serial IRQ Mode Select - Serial IRQ Mode Select, 0: quiet mode, 1: continuous mode. - $EN_DIS -**/ - UINT8 PchSirqMode; - -/** Offset 0x06A6 - Start Frame Pulse Width - Start Frame Pulse Width, 0: PchSfpw4Clk, 1: PchSfpw6Clk, 2: PchSfpw8Clk. - 0: PchSfpw4Clk, 1: PchSfpw6Clk, 2: PchSfpw8Clk -**/ - UINT8 PchStartFramePulse; - -/** Offset 0x06A7 - Reserved - Reserved - $EN_DIS -**/ - UINT8 ReservedForFuture1; - -/** Offset 0x06A8 - Thermal Device SMI Enable - This locks down SMI Enable on Alert Thermal Sensor Trip. - $EN_DIS -**/ - UINT8 PchTsmicLock; - -/** Offset 0x06A9 -**/ - UINT8 UnusedUpdSpace17; - -/** Offset 0x06AA - Thermal Throttling Custimized T0Level Value - Custimized T0Level value. -**/ - UINT16 PchT0Level; - -/** Offset 0x06AC - Thermal Throttling Custimized T1Level Value - Custimized T1Level value. -**/ - UINT16 PchT1Level; - -/** Offset 0x06AE - Thermal Throttling Custimized T2Level Value - Custimized T2Level value. -**/ - UINT16 PchT2Level; - -/** Offset 0x06B0 - Enable The Thermal Throttle - Enable the thermal throttle function. - $EN_DIS -**/ - UINT8 PchTTEnable; - -/** Offset 0x06B1 - PMSync State 13 - When set to 1 and the programmed GPIO pin is a 1, then PMSync state 13 will force - at least T2 state. - $EN_DIS -**/ - UINT8 PchTTState13Enable; - -/** Offset 0x06B2 - Thermal Throttle Lock - Thermal Throttle Lock. - $EN_DIS -**/ - UINT8 PchTTLock; - -/** Offset 0x06B3 - Thermal Throttling Suggested Setting - Thermal Throttling Suggested Setting. - $EN_DIS -**/ - UINT8 TTSuggestedSetting; - -/** Offset 0x06B4 - Enable PCH Cross Throttling - Enable/Disable PCH Cross Throttling - $EN_DIS -**/ - UINT8 TTCrossThrottling; - -/** Offset 0x06B5 - DMI Thermal Sensor Autonomous Width Enable - DMI Thermal Sensor Autonomous Width Enable. - $EN_DIS -**/ - UINT8 PchDmiTsawEn; - -/** Offset 0x06B6 - DMI Thermal Sensor Suggested Setting - DMT thermal sensor suggested representative values. - $EN_DIS -**/ - UINT8 DmiSuggestedSetting; - -/** Offset 0x06B7 - Thermal Sensor 0 Target Width - DMT thermal sensor suggested representative values. - 0:x1, 1:x2, 2:x4, 3:x8, 4:x16 -**/ - UINT8 DmiTS0TW; - -/** Offset 0x06B8 - Thermal Sensor 1 Target Width - Thermal Sensor 1 Target Width. - 0:x1, 1:x2, 2:x4, 3:x8, 4:x16 -**/ - UINT8 DmiTS1TW; - -/** Offset 0x06B9 - Thermal Sensor 2 Target Width - Thermal Sensor 2 Target Width. - 0:x1, 1:x2, 2:x4, 3:x8, 4:x16 -**/ - UINT8 DmiTS2TW; - -/** Offset 0x06BA - Thermal Sensor 3 Target Width - Thermal Sensor 3 Target Width. - 0:x1, 1:x2, 2:x4, 3:x8, 4:x16 -**/ - UINT8 DmiTS3TW; - -/** Offset 0x06BB - Port 0 T1 Multipler - Port 0 T1 Multipler. -**/ - UINT8 SataP0T1M; - -/** Offset 0x06BC - Port 0 T2 Multipler - Port 0 T2 Multipler. -**/ - UINT8 SataP0T2M; - -/** Offset 0x06BD - Port 0 T3 Multipler - Port 0 T3 Multipler. -**/ - UINT8 SataP0T3M; - -/** Offset 0x06BE - Port 0 Tdispatch - Port 0 Tdispatch. -**/ - UINT8 SataP0TDisp; - -/** Offset 0x06BF - Port 1 T1 Multipler - Port 1 T1 Multipler. -**/ - UINT8 SataP1T1M; - -/** Offset 0x06C0 - Port 1 T2 Multipler - Port 1 T2 Multipler. -**/ - UINT8 SataP1T2M; - -/** Offset 0x06C1 - Port 1 T3 Multipler - Port 1 T3 Multipler. -**/ - UINT8 SataP1T3M; - -/** Offset 0x06C2 - Port 1 Tdispatch - Port 1 Tdispatch. -**/ - UINT8 SataP1TDisp; - -/** Offset 0x06C3 - Port 0 Tinactive - Port 0 Tinactive. -**/ - UINT8 SataP0Tinact; - -/** Offset 0x06C4 - Port 0 Alternate Fast Init Tdispatch - Port 0 Alternate Fast Init Tdispatch. - $EN_DIS -**/ - UINT8 SataP0TDispFinit; - -/** Offset 0x06C5 - Port 1 Tinactive - Port 1 Tinactive. -**/ - UINT8 SataP1Tinact; - -/** Offset 0x06C6 - Port 1 Alternate Fast Init Tdispatch - Port 1 Alternate Fast Init Tdispatch. - $EN_DIS -**/ - UINT8 SataP1TDispFinit; - -/** Offset 0x06C7 - Sata Thermal Throttling Suggested Setting - Sata Thermal Throttling Suggested Setting. - $EN_DIS -**/ - UINT8 SataThermalSuggestedSetting; - -/** Offset 0x06C8 - Enable Memory Thermal Throttling - Enable Memory Thermal Throttling. - $EN_DIS -**/ - UINT8 PchMemoryThrottlingEnable; - -/** Offset 0x06C9 - Memory Thermal Throttling - Enable Memory Thermal Throttling. -**/ - UINT8 PchMemoryPmsyncEnable[2]; - -/** Offset 0x06CB - Enable Memory Thermal Throttling - Enable Memory Thermal Throttling. -**/ - UINT8 PchMemoryC0TransmitEnable[2]; - -/** Offset 0x06CD - Enable Memory Thermal Throttling - Enable Memory Thermal Throttling. -**/ - UINT8 PchMemoryPinSelection[2]; - -/** Offset 0x06CF -**/ - UINT8 UnusedUpdSpace18; - -/** Offset 0x06D0 - Thermal Device Temperature - Decides the temperature. -**/ - UINT16 PchTemperatureHotLevel; - -/** Offset 0x06D2 - Enable xHCI Compliance Mode - Compliance Mode can be enabled for testing through this option but this is disabled - by default. - $EN_DIS -**/ - UINT8 PchEnableComplianceMode; - -/** Offset 0x06D3 - USB2 Port Over Current Pin - Describe the specific over current pin number of USB 2.0 Port N. -**/ - UINT8 Usb2OverCurrentPin[16]; - -/** Offset 0x06E3 - USB3 Port Over Current Pin - Describe the specific over current pin number of USB 3.0 Port N. -**/ - UINT8 Usb3OverCurrentPin[10]; - -/** Offset 0x06ED - Enable 8254 Static Clock Gating - Set 8254CGE=1 is required for SLP_S0 support. However, set 8254CGE=1 in POST time - might fail to boot legacy OS using 8254 timer. Make sure it is disabled to support - boot legacy OS using 8254 timer. Also enable this while S0ix is enabled. - $EN_DIS -**/ - UINT8 Enable8254ClockGating; - -/** Offset 0x06EE - PCH Sata Rst Optane Memory - Optane Memory - $EN_DIS -**/ - UINT8 SataRstOptaneMemory; - -/** Offset 0x06EF - PCH Sata Rst CPU Attached Storage - CPU Attached Storage - $EN_DIS -**/ - UINT8 SataRstCpuAttachedStorage; - -/** Offset 0x06F0 - Enable 8254 Static Clock Gating On S3 - This is only applicable when Enable8254ClockGating is disabled. FSP will do the - 8254 CGE programming on S3 resume when Enable8254ClockGatingOnS3 is enabled. This - avoids the SMI requirement for the programming. - $EN_DIS -**/ - UINT8 Enable8254ClockGatingOnS3; - -/** Offset 0x06F1 -**/ - UINT8 UnusedUpdSpace19[3]; - -/** Offset 0x06F4 - Pch PCIE device override table pointer - The PCIe device table is being used to override PCIe device ASPM settings. This - is a pointer points to a 32bit address. And it's only used in PostMem phase. Please - refer to PCH_PCIE_DEVICE_OVERRIDE structure for the table. Last entry VendorId - must be 0. -**/ - UINT32 PchPcieDeviceOverrideTablePtr; - -/** Offset 0x06F8 - Enable TCO timer. - When FALSE, it disables PCH ACPI timer, and stops TCO timer. NOTE: This will have - huge power impact when it's enabled. If TCO timer is disabled, uCode ACPI timer - emulation must be enabled, and WDAT table must not be exposed to the OS. - $EN_DIS -**/ - UINT8 EnableTcoTimer; - -/** Offset 0x06F9 - Enable PS_ON. - PS_ON is a new C10 state from the CPU on desktop SKUs that enables a lower power - target that will be required by the California Energy Commission (CEC). When FALSE, - PS_ON is to be disabled. - $EN_DIS -**/ - UINT8 PsOnEnable; - -/** Offset 0x06FA - Pmc Cpu C10 Gate Pin Enable - Enable/Disable platform support for CPU_C10_GATE# pin to control gating of CPU VccIO - and VccSTG rails instead of SLP_S0# pin. - $EN_DIS -**/ - UINT8 PmcCpuC10GatePinEnable; - -/** Offset 0x06FB - Pch Dmi Aspm Ctrl - ASPM configuration on the PCH side of the DMI/OPI Link. Default is PchPcieAspmAutoConfig - 0:Disabled, 1:L0s, 2:L1, 3:L0sL1, 4:Auto -**/ - UINT8 PchDmiAspmCtrl; - -/** Offset 0x06FC - Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 3 - Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 3, Each - value in array can be between 0-1. One byte for each port. -**/ - UINT8 Usb3HsioTxRate3UniqTranEnable[10]; - -/** Offset 0x0706 - USB 3.0 TX Output Unique Transition Bit Scale for rate 3 - USB 3.0 TX Output Unique Transition Bit Scale for rate 3, HSIO_TX_DWORD9[6:0], Default - = 4Ch. One byte for each port. -**/ - UINT8 Usb3HsioTxRate3UniqTran[10]; - -/** Offset 0x0710 - Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 2 - Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 2, Each - value in array can be between 0-1. One byte for each port. -**/ - UINT8 Usb3HsioTxRate2UniqTranEnable[10]; - -/** Offset 0x071A - USB 3.0 TX Output Unique Transition Bit Scale for rate 2 - USB 3.0 TX Output Unique Transition Bit Scale for rate 2, HSIO_TX_DWORD9[14:8], - Default = 4Ch. One byte for each port. -**/ - UINT8 Usb3HsioTxRate2UniqTran[10]; - -/** Offset 0x0724 - Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 1 - Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 1, Each - value in array can be between 0-1. One byte for each port. -**/ - UINT8 Usb3HsioTxRate1UniqTranEnable[10]; - -/** Offset 0x072E - USB 3.0 TX Output Unique Transition Bit Scale for rate 1 - USB 3.0 TX Output Unique Transition Bit Scale for rate 1, HSIO_TX_DWORD9[22:16], - Default = 4Ch. One byte for each port. -**/ - UINT8 Usb3HsioTxRate1UniqTran[10]; - -/** Offset 0x0738 - Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 0 - Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 0, Each - value in array can be between 0-1. One byte for each port. -**/ - UINT8 Usb3HsioTxRate0UniqTranEnable[10]; - -/** Offset 0x0742 - USB 3.0 TX Output Unique Transition Bit Scale for rate 0 - USB 3.0 TX Output Unique Transition Bit Scale for rate 0, HSIO_TX_DWORD9[30:24], - Default = 4Ch. One byte for each port. -**/ - UINT8 Usb3HsioTxRate0UniqTran[10]; - -/** Offset 0x074C - Number of Coefficients to be used - The number of coefficients to be used for equalization, default value is 3 -**/ - UINT8 PcieNumOfCoefficients; - -/** Offset 0x074D - GPIO RCOMP Community Clock Gating - 0 = Disable dynamic RCOMP clock local clock gating, 1 = Enable dynamic RCOMP clock - local clock gating, default value is 1 - $EN_DIS -**/ - UINT8 GpioPmRcompCommunityLocalClockGating; - -/** Offset 0x074E - Enable SD Card Write Protect Pin - Enable/disable SD Card Write Protect Pin. - $EN_DIS -**/ - UINT8 ScsSdCardWpPinEnabled; - -/** Offset 0x074F - Set SATA DEVSLP GPIO Reset Config - Set SATA DEVSLP GPIO Reset Config per port. 0x00 - GpioResetDefault, 0x01 - GpioResumeReset, - 0x03 - GpioHostDeepReset, 0x05 - GpioPlatformReset, 0x07 - GpioDswReset. One byte - for each port, byte0 for port0, byte1 for port1, and so on. -**/ - UINT8 SataPortsDevSlpResetConfig[8]; - -/** Offset 0x0757 - Flash Configuration Lock Down - Enable/disable flash lock down. If platform decides to skip this programming, it - must lock SPI flash register DLOCK, FLOCKDN, and WRSDIS before end of post. - $EN_DIS -**/ - UINT8 SpiFlashCfgLockDown; - -/** Offset 0x0758 - Enable HD Audio Sndw Link IO Control - 0:Disabled, 1:Enabled. Enables IO Control to Sndw link if it is Enabled -**/ - UINT8 PchHdaSndwLinkIoControlEnabled[4]; - -/** Offset 0x075C - ReservedPchPostMem - Reserved for Pch Post-Mem - $EN_DIS -**/ - UINT8 ReservedPchPostMem[3]; - -/** Offset 0x075F -**/ - UINT8 UnusedUpdSpace20[1]; - -/** Offset 0x0760 - BgpdtHash[4] - BgpdtHash values -**/ - UINT64 BgpdtHash[4]; - -/** Offset 0x0780 - BiosGuardAttr - BiosGuardAttr default values -**/ - UINT32 BiosGuardAttr; - -/** Offset 0x0784 -**/ - UINT8 UnusedUpdSpace21[4]; - -/** Offset 0x0788 - BiosGuardModulePtr - BiosGuardModulePtr default values -**/ - UINT64 BiosGuardModulePtr; - -/** Offset 0x0790 - SendEcCmd - SendEcCmd function pointer. \n - @code typedef EFI_STATUS (EFIAPI *PLATFORM_SEND_EC_COMMAND) (IN EC_COMMAND_TYPE - EcCmdType, IN UINT8 EcCmd, IN UINT8 SendData, IN OUT UINT8 *ReceiveData); @endcode -**/ - UINT64 SendEcCmd; - -/** Offset 0x0798 - EcCmdProvisionEav - Ephemeral Authorization Value default values. Provisions an ephemeral shared secret to the EC -**/ - UINT8 EcCmdProvisionEav; - -/** Offset 0x0799 - EcCmdLock - EcCmdLock default values. Locks Ephemeral Authorization Value sent previously -**/ - UINT8 EcCmdLock; - -/** Offset 0x079A -**/ - UINT8 UnusedUpdSpace22[6]; - -/** Offset 0x07A0 - SgxEpoch0 - SgxEpoch0 default values -**/ - UINT64 SgxEpoch0; - -/** Offset 0x07A8 - SgxEpoch1 - SgxEpoch1 default values -**/ - UINT64 SgxEpoch1; - -/** Offset 0x07B0 - SgxSinitNvsData - SgxSinitNvsData default values -**/ - UINT8 SgxSinitNvsData; - -/** Offset 0x07B1 - Si Config CSM Flag. - Platform specific common policies that used by several silicon components. CSM status flag. - $EN_DIS -**/ - UINT8 SiCsmFlag; - -/** Offset 0x07B2 -**/ - UINT8 UnusedUpdSpace23[2]; - -/** Offset 0x07B4 - SVID SDID table Poniter. - The address of the table of SVID SDID to customize each SVID SDID entry. -**/ - UINT32 SiSsidTablePtr; - -/** Offset 0x07B8 - Number of ssid table. - SiNumberOfSsidTableEntry should match the table entries created in SiSsidTablePtr. -**/ - UINT16 SiNumberOfSsidTableEntry; - -/** Offset 0x07BA - SATA RST Interrupt Mode - Allowes to choose which interrupts will be implemented by SATA controller in RAID mode. - 0:Msix, 1:Msi, 2:Legacy -**/ - UINT8 SataRstInterrupt; - -/** Offset 0x07BB - ME Unconfig on RTC clear - 0: Disable ME Unconfig On Rtc Clear. 1: Enable ME Unconfig On Rtc Clear. - 2: Cmos is clear, status unkonwn. 3: Reserved - 0: Disable ME Unconfig On Rtc Clear, 1: Enable ME Unconfig On Rtc Clear, 2: Cmos - is clear, 3: Reserved -**/ - UINT8 MeUnconfigOnRtcClear; - -/** Offset 0x07BC -**/ - UINT8 UnusedUpdSpace24[3]; - -/** Offset 0x07BF -**/ - UINT8 ReservedFspsUpd[1]; -} FSP_S_CONFIG; - -/** Fsp S Test Configuration -**/ -typedef struct { - -/** Offset 0x07C0 -**/ - UINT32 Signature; - -/** Offset 0x07C4 - Enable/Disable Device 7 - Enable: Device 7 enabled, Disable (Default): Device 7 disabled - $EN_DIS -**/ - UINT8 ChapDeviceEnable; - -/** Offset 0x07C5 - Skip PAM register lock - Enable: PAM register will not be locked by RC, platform code should lock it, Disable(Default): - PAM registers will be locked by RC - $EN_DIS -**/ - UINT8 SkipPamLock; - -/** Offset 0x07C6 - EDRAM Test Mode - Enable: PAM register will not be locked by RC, platform code should lock it, Disable(Default): - PAM registers will be locked by RC - 0: EDRAM SW disable, 1: EDRAM SW Enable, 2: EDRAM HW mode -**/ - UINT8 EdramTestMode; - -/** Offset 0x07C7 - DMI Extended Sync Control - Enable: Enable DMI Extended Sync Control, Disable(Default): Disable DMI Extended - Sync Control - $EN_DIS -**/ - UINT8 DmiExtSync; - -/** Offset 0x07C8 - DMI IOT Control - Enable: Enable DMI IOT Control, Disable(Default): Disable DMI IOT Control - $EN_DIS -**/ - UINT8 DmiIot; - -/** Offset 0x07C9 - PEG Max Payload size per root port - 0xFF(Default):Auto, 0x1: Force 128B, 0x2: Force 256B - 0xFF: Auto, 0x1: Force 128B, 0x2: Force 256B -**/ - UINT8 PegMaxPayload[4]; - -/** Offset 0x07CD - Enable/Disable IGFX RenderStandby - Enable(Default): Enable IGFX RenderStandby, Disable: Disable IGFX RenderStandby - $EN_DIS -**/ - UINT8 RenderStandby; - -/** Offset 0x07CE - Enable/Disable IGFX PmSupport - Enable(Default): Enable IGFX PmSupport, Disable: Disable IGFX PmSupport - $EN_DIS -**/ - UINT8 PmSupport; - -/** Offset 0x07CF - Enable/Disable CdynmaxClamp - Enable(Default): Enable CdynmaxClamp, Disable: Disable CdynmaxClamp - $EN_DIS -**/ - UINT8 CdynmaxClampEnable; - -/** Offset 0x07D0 - Disable VT-d - 0=Enable/FALSE(VT-d enabled), 1=Disable/TRUE (VT-d disabled) - $EN_DIS -**/ - UINT8 VtdDisableDeprecated; - -/** Offset 0x07D1 - GT Frequency Limit - 0xFF: Auto(Default), 2: 100 Mhz, 3: 150 Mhz, 4: 200 Mhz, 5: 250 Mhz, 6: 300 Mhz, - 7: 350 Mhz, 8: 400 Mhz, 9: 450 Mhz, 0xA: 500 Mhz, 0xB: 550 Mhz, 0xC: 600 Mhz, 0xD: - 650 Mhz, 0xE: 700 Mhz, 0xF: 750 Mhz, 0x10: 800 Mhz, 0x11: 850 Mhz, 0x12:900 Mhz, - 0x13: 950 Mhz, 0x14: 1000 Mhz, 0x15: 1050 Mhz, 0x16: 1100 Mhz, 0x17: 1150 Mhz, - 0x18: 1200 Mhz - 0xFF: Auto(Default), 2: 100 Mhz, 3: 150 Mhz, 4: 200 Mhz, 5: 250 Mhz, 6: 300 Mhz, - 7: 350 Mhz, 8: 400 Mhz, 9: 450 Mhz, 0xA: 500 Mhz, 0xB: 550 Mhz, 0xC: 600 Mhz, 0xD: - 650 Mhz, 0xE: 700 Mhz, 0xF: 750 Mhz, 0x10: 800 Mhz, 0x11: 850 Mhz, 0x12:900 Mhz, - 0x13: 950 Mhz, 0x14: 1000 Mhz, 0x15: 1050 Mhz, 0x16: 1100 Mhz, 0x17: 1150 Mhz, - 0x18: 1200 Mhz -**/ - UINT8 GtFreqMax; - -/** Offset 0x07D2 - Disable Turbo GT - 0=Disable: GT frequency is not limited, 1=Enable: Disables Turbo GT frequency - $EN_DIS -**/ - UINT8 DisableTurboGt; - -/** Offset 0x07D3 - SaPostMemTestRsvd - Reserved for SA Post-Mem Test - $EN_DIS -**/ - UINT8 SaPostMemTestRsvd[11]; - -/** Offset 0x07DE - 1-Core Ratio Limit - 1-Core Ratio Limit: LFM to Fused, For overclocking part: LFM to 255. This 1-Core - Ratio Limit Must be greater than or equal to 2-Core Ratio Limit, 3-Core Ratio Limit, - 4-Core Ratio Limit, 5-Core Ratio Limit, 6-Core Ratio Limit, 7-Core Ratio Limit, - 8-Core Ratio Limit. Range is 0 to 255 -**/ - UINT8 OneCoreRatioLimit; - -/** Offset 0x07DF - 2-Core Ratio Limit - 2-Core Ratio Limit: LFM to Fused, For overclocking part: LFM to 255. This 2-Core - Ratio Limit Must be Less than or equal to 1-Core Ratio Limit.Range is 0 to 255 -**/ - UINT8 TwoCoreRatioLimit; - -/** Offset 0x07E0 - 3-Core Ratio Limit - 3-Core Ratio Limit: LFM to Fused, For overclocking part: LFM to 255. This 3-Core - Ratio Limit Must be Less than or equal to 1-Core Ratio Limit.Range is 0 to 255 -**/ - UINT8 ThreeCoreRatioLimit; - -/** Offset 0x07E1 - 4-Core Ratio Limit - 4-Core Ratio Limit: LFM to Fused, For overclocking part: LFM to 255. This 4-Core - Ratio Limit Must be Less than or equal to 1-Core Ratio Limit.Range is 0 to 255 -**/ - UINT8 FourCoreRatioLimit; - -/** Offset 0x07E2 - Enable or Disable HWP - Enable or Disable HWP(Hardware P states) Support. 0: Disable; 1: Enable; - 2-3:Reserved - $EN_DIS -**/ - UINT8 Hwp; - -/** Offset 0x07E3 - Hardware Duty Cycle Control - Hardware Duty Cycle Control configuration. 0: Disabled; 1: Enabled 2-3:Reserved - $EN_DIS -**/ - UINT8 HdcControl; - -/** Offset 0x07E4 - Package Long duration turbo mode time - Package Long duration turbo mode time window in seconds. 0 = AUTO, uses 28 seconds. - Valid values(Unit in seconds) 1 to 8 , 10 , 12 ,14 , 16 , 20 , 24 , 28 , 32 , 40 - , 48 , 56 , 64 , 80 , 96 , 112 , 128 -**/ - UINT8 PowerLimit1Time; - -/** Offset 0x07E5 - Short Duration Turbo Mode - Enable or Disable short duration Turbo Mode. 0 : Disable; 1: Enable - $EN_DIS -**/ - UINT8 PowerLimit2; - -/** Offset 0x07E6 - Turbo settings Lock - Lock all Turbo settings Enable/Disable; 0: Disable , 1: Enable - $EN_DIS -**/ - UINT8 TurboPowerLimitLock; - -/** Offset 0x07E7 - Package PL3 time window - Package PL3 time window range for this policy from 0 to 64ms -**/ - UINT8 PowerLimit3Time; - -/** Offset 0x07E8 - Package PL3 Duty Cycle - Package PL3 Duty Cycle; Valid Range is 0 to 100 -**/ - UINT8 PowerLimit3DutyCycle; - -/** Offset 0x07E9 - Package PL3 Lock - Package PL3 Lock Enable/Disable; 0: Disable ; 1: Enable - $EN_DIS -**/ - UINT8 PowerLimit3Lock; - -/** Offset 0x07EA - Package PL4 Lock - Package PL4 Lock Enable/Disable; 0: Disable ; 1: Enable - $EN_DIS -**/ - UINT8 PowerLimit4Lock; - -/** Offset 0x07EB - TCC Activation Offset - TCC Activation Offset. Offset from factory set TCC activation temperature at which - the Thermal Control Circuit must be activated. TCC will be activated at TCC Activation - Temperature, in volts.For Y SKU, the recommended default for this policy is 15, - For all other SKUs the recommended default are 0 -**/ - UINT8 TccActivationOffset; - -/** Offset 0x07EC - Tcc Offset Clamp Enable/Disable - Tcc Offset Clamp for Runtime Average Temperature Limit (RATL) allows CPU to throttle - below P1.For Y SKU, the recommended default for this policy is 1: Enabled, - For all other SKUs the recommended default are 0: Disabled. - $EN_DIS -**/ - UINT8 TccOffsetClamp; - -/** Offset 0x07ED - Tcc Offset Lock - Tcc Offset Lock for Runtime Average Temperature Limit (RATL) to lock temperature - target; 0: Disabled; 1: Enabled. - $EN_DIS -**/ - UINT8 TccOffsetLock; - -/** Offset 0x07EE - Custom Ratio State Entries - The number of custom ratio state entries, ranges from 0 to 40 for a valid custom - ratio table.Sets the number of custom P-states. At least 2 states must be present -**/ - UINT8 NumberOfEntries; - -/** Offset 0x07EF - Custom Short term Power Limit time window - Short term Power Limit time window value for custom CTDP level 1. Valid Range 0 - to 128, 0 = AUTO -**/ - UINT8 Custom1PowerLimit1Time; - -/** Offset 0x07F0 - Custom Turbo Activation Ratio - Turbo Activation Ratio for custom cTDP level 1. Valid Range 0 to 255 -**/ - UINT8 Custom1TurboActivationRatio; - -/** Offset 0x07F1 - Custom Config Tdp Control - Config Tdp Control (0/1/2) value for custom cTDP level 1. Valid Range is 0 to 2 -**/ - UINT8 Custom1ConfigTdpControl; - -/** Offset 0x07F2 - Custom Short term Power Limit time window - Short term Power Limit time window value for custom CTDP level 2. Valid Range 0 - to 128, 0 = AUTO -**/ - UINT8 Custom2PowerLimit1Time; - -/** Offset 0x07F3 - Custom Turbo Activation Ratio - Turbo Activation Ratio for custom cTDP level 2. Valid Range 0 to 255 -**/ - UINT8 Custom2TurboActivationRatio; - -/** Offset 0x07F4 - Custom Config Tdp Control - Config Tdp Control (0/1/2) value for custom cTDP level 1. Valid Range is 0 to 2 -**/ - UINT8 Custom2ConfigTdpControl; - -/** Offset 0x07F5 - Custom Short term Power Limit time window - Short term Power Limit time window value for custom CTDP level 3. Valid Range 0 - to 128, 0 = AUTO -**/ - UINT8 Custom3PowerLimit1Time; - -/** Offset 0x07F6 - Custom Turbo Activation Ratio - Turbo Activation Ratio for custom cTDP level 3. Valid Range 0 to 255 -**/ - UINT8 Custom3TurboActivationRatio; - -/** Offset 0x07F7 - Custom Config Tdp Control - Config Tdp Control (0/1/2) value for custom cTDP level 1. Valid Range is 0 to 2 -**/ - UINT8 Custom3ConfigTdpControl; - -/** Offset 0x07F8 - ConfigTdp mode settings Lock - Lock the ConfigTdp mode settings from runtime changes; 0: Disable; 1: Enable - $EN_DIS -**/ - UINT8 ConfigTdpLock; - -/** Offset 0x07F9 - Load Configurable TDP SSDT - Configure whether to load Configurable TDP SSDT; 0: Disable; 1: Enable. - $EN_DIS -**/ - UINT8 ConfigTdpBios; - -/** Offset 0x07FA - PL1 Enable value - PL1 Enable value to limit average platform power. 0: Disable; 1: Enable. - $EN_DIS -**/ - UINT8 PsysPowerLimit1; - -/** Offset 0x07FB - PL1 timewindow - PL1 timewindow in seconds. 0 = AUTO, uses 28 seconds. Valid values(Unit in seconds) - 1 to 8 , 10 , 12 ,14 , 16 , 20 , 24 , 28 , 32 , 40 , 48 , 56 , 64 , 80 , 96 , 112 , 128 -**/ - UINT8 PsysPowerLimit1Time; - -/** Offset 0x07FC - PL2 Enable Value - PL2 Enable activates the PL2 value to limit average platform power.0: Disable; - 1: Enable. - $EN_DIS -**/ - UINT8 PsysPowerLimit2; - -/** Offset 0x07FD - Enable or Disable MLC Streamer Prefetcher - Enable or Disable MLC Streamer Prefetcher; 0: Disable; 1: Enable. - $EN_DIS -**/ - UINT8 MlcStreamerPrefetcher; - -/** Offset 0x07FE - Enable or Disable MLC Spatial Prefetcher - Enable or Disable MLC Spatial Prefetcher; 0: Disable; 1: Enable - $EN_DIS -**/ - UINT8 MlcSpatialPrefetcher; - -/** Offset 0x07FF - Enable or Disable Monitor /MWAIT instructions - Enable or Disable Monitor /MWAIT instructions; 0: Disable; 1: Enable. - $EN_DIS -**/ - UINT8 MonitorMwaitEnable; - -/** Offset 0x0800 - Enable or Disable initialization of machine check registers - Enable or Disable initialization of machine check registers; 0: Disable; 1: Enable. - $EN_DIS -**/ - UINT8 MachineCheckEnable; - -/** Offset 0x0801 - Deprecated DO NOT USE Enable or Disable processor debug features - @deprecated Enable or Disable processor debug features; 0: Disable; 1: Enable. - $EN_DIS -**/ - UINT8 DebugInterfaceEnable; - -/** Offset 0x0802 - Lock or Unlock debug interface features - Lock or Unlock debug interface features; 0: Disable; 1: Enable. - $EN_DIS -**/ - UINT8 DebugInterfaceLockEnable; - -/** Offset 0x0803 - AP Idle Manner of waiting for SIPI - AP Idle Manner of waiting for SIPI; 1: HALT loop; 2: MWAIT loop; 3: RUN loop. - 1: HALT loop, 2: MWAIT loop, 3: RUN loop -**/ - UINT8 ApIdleManner; - -/** Offset 0x0804 - Control on Processor Trace output scheme - Control on Processor Trace output scheme; 0: Single Range Output; 1: ToPA Output. - 0: Single Range Output, 1: ToPA Output -**/ - UINT8 ProcessorTraceOutputScheme; - -/** Offset 0x0805 - Enable or Disable Processor Trace feature - Enable or Disable Processor Trace feature; 0: Disable; 1: Enable. - $EN_DIS -**/ - UINT8 ProcessorTraceEnable; - -/** Offset 0x0806 -**/ - UINT8 UnusedUpdSpace25[2]; - -/** Offset 0x0808 - Base of memory region allocated for Processor Trace - Base address of memory region allocated for Processor Trace. Processor Trace requires - 2^N alignment and size in bytes per thread, from 4KB to 128MB. 0: Disable -**/ - UINT64 ProcessorTraceMemBase; - -/** Offset 0x0810 - Memory region allocation for Processor Trace - Length in bytes of memory region allocated for Processor Trace. Processor Trace - requires 2^N alignment and size in bytes per thread, from 4KB to 128MB. 0: Disable -**/ - UINT32 ProcessorTraceMemLength; - -/** Offset 0x0814 - Enable or Disable Voltage Optimization feature - Enable or Disable Voltage Optimization feature 0: Disable; 1: Enable - $EN_DIS -**/ - UINT8 VoltageOptimization; - -/** Offset 0x0815 - Enable or Disable Intel SpeedStep Technology - Enable or Disable Intel SpeedStep Technology. 0: Disable; 1: Enable - $EN_DIS -**/ - UINT8 Eist; - -/** Offset 0x0816 - Enable or Disable Energy Efficient P-state - Enable or Disable Energy Efficient P-state will be applied in Turbo mode. Disable; - 1: Enable - $EN_DIS -**/ - UINT8 EnergyEfficientPState; - -/** Offset 0x0817 - Enable or Disable Energy Efficient Turbo - Enable or Disable Energy Efficient Turbo, will be applied in Turbo mode. Disable; - 1: Enable - $EN_DIS -**/ - UINT8 EnergyEfficientTurbo; - -/** Offset 0x0818 - Enable or Disable T states - Enable or Disable T states; 0: Disable; 1: Enable. - $EN_DIS -**/ - UINT8 TStates; - -/** Offset 0x0819 - Enable or Disable Bi-Directional PROCHOT# - Enable or Disable Bi-Directional PROCHOT#; 0: Disable; 1: Enable - $EN_DIS -**/ - UINT8 BiProcHot; - -/** Offset 0x081A - Enable or Disable PROCHOT# signal being driven externally - Enable or Disable PROCHOT# signal being driven externally; 0: Disable; 1: Enable. - $EN_DIS -**/ - UINT8 DisableProcHotOut; - -/** Offset 0x081B - Enable or Disable PROCHOT# Response - Enable or Disable PROCHOT# Response; 0: Disable; 1: Enable. - $EN_DIS -**/ - UINT8 ProcHotResponse; - -/** Offset 0x081C - Enable or Disable VR Thermal Alert - Enable or Disable VR Thermal Alert; 0: Disable; 1: Enable. - $EN_DIS -**/ - UINT8 DisableVrThermalAlert; - -/** Offset 0x081D - Enable or Disable Thermal Reporting - Enable or Disable Thermal Reporting through ACPI tables; 0: Disable; 1: Enable. - $EN_DIS -**/ - UINT8 AutoThermalReporting; - -/** Offset 0x081E - Enable or Disable Thermal Monitor - Enable or Disable Thermal Monitor; 0: Disable; 1: Enable - $EN_DIS -**/ - UINT8 ThermalMonitor; - -/** Offset 0x081F - Enable or Disable CPU power states (C-states) - Enable or Disable CPU power states (C-states). 0: Disable; 1: Enable - $EN_DIS -**/ - UINT8 Cx; - -/** Offset 0x0820 - Configure C-State Configuration Lock - Configure C-State Configuration Lock; 0: Disable; 1: Enable. - $EN_DIS -**/ - UINT8 PmgCstCfgCtrlLock; - -/** Offset 0x0821 - Enable or Disable Enhanced C-states - Enable or Disable Enhanced C-states. 0: Disable; 1: Enable - $EN_DIS -**/ - UINT8 C1e; - -/** Offset 0x0822 - Enable or Disable Package Cstate Demotion - Enable or Disable Package Cstate Demotion. 0: Disable; 1: Enable - $EN_DIS -**/ - UINT8 PkgCStateDemotion; - -/** Offset 0x0823 - Enable or Disable Package Cstate UnDemotion - Enable or Disable Package Cstate UnDemotion. 0: Disable; 1: Enable - $EN_DIS -**/ - UINT8 PkgCStateUnDemotion; - -/** Offset 0x0824 - Enable or Disable CState-Pre wake - Enable or Disable CState-Pre wake. 0: Disable; 1: Enable - $EN_DIS -**/ - UINT8 CStatePreWake; - -/** Offset 0x0825 - Enable or Disable TimedMwait Support. - Enable or Disable TimedMwait Support. 0: Disable; 1: Enable - $EN_DIS -**/ - UINT8 TimedMwait; - -/** Offset 0x0826 - Enable or Disable IO to MWAIT redirection - Enable or Disable IO to MWAIT redirection; 0: Disable; 1: Enable. - $EN_DIS -**/ - UINT8 CstCfgCtrIoMwaitRedirection; - -/** Offset 0x0827 - Set the Max Pkg Cstate - Set the Max Pkg Cstate. Default set to Auto which limits the Max Pkg Cstate to deep - C-state. Valid values 0 - C0/C1 , 1 - C2 , 2 - C3 , 3 - C6 , 4 - C7 , 5 - C7S , - 6 - C8 , 7 - C9 , 8 - C10 , 254 - CPU Default , 255 - Auto -**/ - UINT8 PkgCStateLimit; - -/** Offset 0x0828 - TimeUnit for C-State Latency Control0 - TimeUnit for C-State Latency Control0; Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns - , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns -**/ - UINT8 CstateLatencyControl0TimeUnit; - -/** Offset 0x0829 - TimeUnit for C-State Latency Control1 - TimeUnit for C-State Latency Control1;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns - , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns -**/ - UINT8 CstateLatencyControl1TimeUnit; - -/** Offset 0x082A - TimeUnit for C-State Latency Control2 - TimeUnit for C-State Latency Control2;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns - , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns -**/ - UINT8 CstateLatencyControl2TimeUnit; - -/** Offset 0x082B - TimeUnit for C-State Latency Control3 - TimeUnit for C-State Latency Control3;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns - , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns -**/ - UINT8 CstateLatencyControl3TimeUnit; - -/** Offset 0x082C - TimeUnit for C-State Latency Control4 - Time - 1ns , 1 - 32ns , 2 - 1024ns , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns -**/ - UINT8 CstateLatencyControl4TimeUnit; - -/** Offset 0x082D - TimeUnit for C-State Latency Control5 - TimeUnit for C-State Latency Control5;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns - , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns -**/ - UINT8 CstateLatencyControl5TimeUnit; - -/** Offset 0x082E - Interrupt Redirection Mode Select - Interrupt Redirection Mode Select.0: Fixed priority; 1: Round robin;2: Hash vector;4: - PAIR with fixed priority;5: PAIR with round robin;6: PAIR with hash vector;7: No change. -**/ - UINT8 PpmIrmSetting; - -/** Offset 0x082F - Lock prochot configuration - Lock prochot configuration Enable/Disable; 0: Disable; 1: Enable - $EN_DIS -**/ - UINT8 ProcHotLock; - -/** Offset 0x0830 - Configuration for boot TDP selection - Configuration for boot TDP selection; 0: TDP Nominal; 1: TDP Down; 2: TDP - Up;0xFF : Deactivate -**/ - UINT8 ConfigTdpLevel; - -/** Offset 0x0831 - Race To Halt - Enable/Disable Race To Halt feature. RTH will dynamically increase CPU frequency - in order to enter pkg C-State faster to reduce overall power. (RTH is controlled - through MSR 1FC bit 20)Disable; 1: Enable - $EN_DIS -**/ - UINT8 RaceToHalt; - -/** Offset 0x0832 - Max P-State Ratio - Max P-State Ratio, Valid Range 0 to 0x7F -**/ - UINT8 MaxRatio; - -/** Offset 0x0833 - P-state ratios for custom P-state table - P-state ratios for custom P-state table. NumberOfEntries has valid range between - 0 to 40. For no. of P-States supported(NumberOfEntries) , StateRatio[NumberOfEntries] - are configurable. Valid Range of each entry is 0 to 0x7F -**/ - UINT8 StateRatio[40]; - -/** Offset 0x085B - P-state ratios for max 16 version of custom P-state table - P-state ratios for max 16 version of custom P-state table. This table is used for - OS versions limited to a max of 16 P-States. If the first entry of this table is - 0, or if Number of Entries is 16 or less, then this table will be ignored, and - up to the top 16 values of the StateRatio table will be used instead. Valid Range - of each entry is 0 to 0x7F -**/ - UINT8 StateRatioMax16[16]; - -/** Offset 0x086B -**/ - UINT8 UnusedUpdSpace26; - -/** Offset 0x086C - Platform Power Pmax - PCODE MMIO Mailbox: Platform Power Pmax. 0 - Auto Specified in 1/8 Watt increments. - Range 0-1024 Watts. Value of 800 = 100W -**/ - UINT16 PsysPmax; - -/** Offset 0x086E - Interrupt Response Time Limit of C-State LatencyContol0 - Interrupt Response Time Limit of C-State LatencyContol0.Range of value 0 to 0x3FF -**/ - UINT16 CstateLatencyControl0Irtl; - -/** Offset 0x0870 - Interrupt Response Time Limit of C-State LatencyContol1 - Interrupt Response Time Limit of C-State LatencyContol1.Range of value 0 to 0x3FF -**/ - UINT16 CstateLatencyControl1Irtl; - -/** Offset 0x0872 - Interrupt Response Time Limit of C-State LatencyContol2 - Interrupt Response Time Limit of C-State LatencyContol2.Range of value 0 to 0x3FF -**/ - UINT16 CstateLatencyControl2Irtl; - -/** Offset 0x0874 - Interrupt Response Time Limit of C-State LatencyContol3 - Interrupt Response Time Limit of C-State LatencyContol3.Range of value 0 to 0x3FF -**/ - UINT16 CstateLatencyControl3Irtl; - -/** Offset 0x0876 - Interrupt Response Time Limit of C-State LatencyContol4 - Interrupt Response Time Limit of C-State LatencyContol4.Range of value 0 to 0x3FF -**/ - UINT16 CstateLatencyControl4Irtl; - -/** Offset 0x0878 - Interrupt Response Time Limit of C-State LatencyContol5 - Interrupt Response Time Limit of C-State LatencyContol5.Range of value 0 to 0x3FF -**/ - UINT16 CstateLatencyControl5Irtl; - -/** Offset 0x087A -**/ - UINT8 UnusedUpdSpace27[2]; - -/** Offset 0x087C - Package Long duration turbo mode power limit - Package Long duration turbo mode power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit. - Valid Range 0 to 4095875 in Step size of 125 -**/ - UINT32 PowerLimit1; - -/** Offset 0x0880 - Package Short duration turbo mode power limit - Package Short duration turbo mode power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid - Range 0 to 4095875 in Step size of 125 -**/ - UINT32 PowerLimit2Power; - -/** Offset 0x0884 - Package PL3 power limit - Package PL3 power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid - Range 0 to 4095875 in Step size of 125 -**/ - UINT32 PowerLimit3; - -/** Offset 0x0888 - Package PL4 power limit - Package PL4 power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid - Range 0 to 1023875 in Step size of 125 -**/ - UINT32 PowerLimit4; - -/** Offset 0x088C - Tcc Offset Time Window for RATL - Package PL4 power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid - Range 0 to 1023875 in Step size of 125 -**/ - UINT32 TccOffsetTimeWindowForRatl; - -/** Offset 0x0890 - Short term Power Limit value for custom cTDP level 1 - Short term Power Limit value for custom cTDP level 1. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid - Range 0 to 4095875 in Step size of 125 -**/ - UINT32 Custom1PowerLimit1; - -/** Offset 0x0894 - Long term Power Limit value for custom cTDP level 1 - Long term Power Limit value for custom cTDP level 1. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid - Range 0 to 4095875 in Step size of 125 -**/ - UINT32 Custom1PowerLimit2; - -/** Offset 0x0898 - Short term Power Limit value for custom cTDP level 2 - Short term Power Limit value for custom cTDP level 2. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid - Range 0 to 4095875 in Step size of 125 -**/ - UINT32 Custom2PowerLimit1; - -/** Offset 0x089C - Long term Power Limit value for custom cTDP level 2 - Long term Power Limit value for custom cTDP level 2. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid - Range 0 to 4095875 in Step size of 125 -**/ - UINT32 Custom2PowerLimit2; - -/** Offset 0x08A0 - Short term Power Limit value for custom cTDP level 3 - Short term Power Limit value for custom cTDP level 3. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid - Range 0 to 4095875 in Step size of 125 -**/ - UINT32 Custom3PowerLimit1; - -/** Offset 0x08A4 - Long term Power Limit value for custom cTDP level 3 - Long term Power Limit value for custom cTDP level 3. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid - Range 0 to 4095875 in Step size of 125 -**/ - UINT32 Custom3PowerLimit2; - -/** Offset 0x08A8 - Platform PL1 power - Platform PL1 power. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid Range - 0 to 4095875 in Step size of 125 -**/ - UINT32 PsysPowerLimit1Power; - -/** Offset 0x08AC - Platform PL2 power - Platform PL2 power. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid Range - 0 to 4095875 in Step size of 125 -**/ - UINT32 PsysPowerLimit2Power; - -/** Offset 0x08B0 - Set Three Strike Counter Disable - False (default): Three Strike counter will be incremented and True: Prevents Three - Strike counter from incrementing; 0: False; 1: True. - 0: False, 1: True -**/ - UINT8 ThreeStrikeCounterDisable; - -/** Offset 0x08B1 - Set HW P-State Interrupts Enabled for for MISC_PWR_MGMT - Set HW P-State Interrupts Enabled for for MISC_PWR_MGMT; 0: Disable; 1: Enable. - $EN_DIS -**/ - UINT8 HwpInterruptControl; - -/** Offset 0x08B2 - 5-Core Ratio Limit - 5-Core Ratio Limit: LFM to Fused, For overclocking part: LFM to 255. This 5-Core - Ratio Limit Must be Less than or equal to 1-Core Ratio Limit.Range is 0 to 255 - 0x0:0xFF -**/ - UINT8 FiveCoreRatioLimit; - -/** Offset 0x08B3 - 6-Core Ratio Limit - 6-Core Ratio Limit: LFM to Fused, For overclocking part: LFM to 255. This 6-Core - Ratio Limit Must be Less than or equal to 1-Core Ratio Limit.Range is 0 to 255 - 0x0:0xFF -**/ - UINT8 SixCoreRatioLimit; - -/** Offset 0x08B4 - 7-Core Ratio Limit - 7-Core Ratio Limit: LFM to Fused, For overclocking part: LFM to 255. This 7-Core - Ratio Limit Must be Less than or equal to 1-Core Ratio Limit.Range is 0 to 255 - 0x0:0xFF -**/ - UINT8 SevenCoreRatioLimit; - -/** Offset 0x08B5 - 8-Core Ratio Limit - 8-Core Ratio Limit: LFM to Fused, For overclocking part: LFM to 255. This 8-Core - Ratio Limit Must be Less than or equal to 1-Core Ratio Limit.Range is 0 to 255 - 0x0:0xFF -**/ - UINT8 EightCoreRatioLimit; - -/** Offset 0x08B6 - Intel Turbo Boost Max Technology 3.0 - Intel Turbo Boost Max Technology 3.0. 0: Disabled; 1: Enabled - $EN_DIS -**/ - UINT8 EnableItbm; - -/** Offset 0x08B7 - Intel Turbo Boost Max Technology 3.0 Driver - Intel Turbo Boost Max Technology 3.0 Driver 0: Disabled; 1: Enabled - $EN_DIS -**/ - UINT8 EnableItbmDriver; - -/** Offset 0x08B8 - Enable or Disable C1 Cstate Demotion - Enable or Disable C1 Cstate Demotion. Disable; 1: Enable - $EN_DIS -**/ - UINT8 C1StateAutoDemotion; - -/** Offset 0x08B9 - Enable or Disable C1 Cstate UnDemotion - Enable or Disable C1 Cstate UnDemotion. Disable; 1: Enable - $EN_DIS -**/ - UINT8 C1StateUnDemotion; - -/** Offset 0x08BA - CpuWakeUpTimer - Enable long CPU Wakeup Timer. When enabled, the cpu internal wakeup time is increased - to 180 seconds. 0: Disable; 1: Enable - $EN_DIS -**/ - UINT8 CpuWakeUpTimer; - -/** Offset 0x08BB - Minimum Ring ratio limit override - Minimum Ring ratio limit override. 0: Hardware defaults. Range: 0 - Max turbo - ratio limit -**/ - UINT8 MinRingRatioLimit; - -/** Offset 0x08BC - Minimum Ring ratio limit override - Maximum Ring ratio limit override. 0: Hardware defaults. Range: 0 - Max turbo - ratio limit -**/ - UINT8 MaxRingRatioLimit; - -/** Offset 0x08BD - Enable or Disable C3 Cstate Demotion - Enable or Disable C3 Cstate Demotion. Disable; 1: Enable - $EN_DIS -**/ - UINT8 C3StateAutoDemotion; - -/** Offset 0x08BE - Enable or Disable C3 Cstate UnDemotion - Enable or Disable C3 Cstate UnDemotion. Disable; 1: Enable - $EN_DIS -**/ - UINT8 C3StateUnDemotion; - -/** Offset 0x08BF - Ratio Limit Num Core 0 - Ratio Limit Num Core0: This register defines the active core ranges for each frequency point -**/ - UINT8 RatioLimitNumCore0; - -/** Offset 0x08C0 - Ratio Limit Num Core 1 - Ratio Limit Num Core1: This register defines the active core ranges for each frequency point -**/ - UINT8 RatioLimitNumCore1; - -/** Offset 0x08C1 - Ratio Limit Num Core 2 - Ratio Limit Num Core2: This register defines the active core ranges for each frequency point -**/ - UINT8 RatioLimitNumCore2; - -/** Offset 0x08C2 - Ratio Limit Core 3 - Ratio Limit Num Core3: This register defines the active core ranges for each frequency point -**/ - UINT8 RatioLimitNumCore3; - -/** Offset 0x08C3 - Ratio Limit Num Core 4 - Ratio Limit Num Core4: This register defines the active core ranges for each frequency point -**/ - UINT8 RatioLimitNumCore4; - -/** Offset 0x08C4 - Ratio Limit Num Core 5 - Ratio Limit Num Core5: This register defines the active core ranges for each frequency point -**/ - UINT8 RatioLimitNumCore5; - -/** Offset 0x08C5 - Ratio Limit Num Core 6 - Ratio Limit Num Core6: This register defines the active core ranges for each frequency point -**/ - UINT8 RatioLimitNumCore6; - -/** Offset 0x08C6 - Ratio Limit Num Core 7 - Ratio Limit Num Core7: This register defines the active core ranges for each frequency point -**/ - UINT8 RatioLimitNumCore7; - -/** Offset 0x08C7 - ReservedCpuPostMemTest - Reserved for CPU Post-Mem Test - $EN_DIS -**/ - UINT8 ReservedCpuPostMemTest[11]; - -/** Offset 0x08D2 - SgxSinitDataFromTpm - SgxSinitDataFromTpm default values -**/ - UINT8 SgxSinitDataFromTpm; - -/** Offset 0x08D3 - End of Post message - Deprecated - 0:Disable, 1:Send in PEI, 2:Send in DXE, 3:Reserved -**/ - UINT8 EndOfPostMessage; - -/** Offset 0x08D4 - D0I3 Setting for HECI Disable - Test, 0: disable, 1: enable, Setting this option disables setting D0I3 bit for all - HECI devices - $EN_DIS -**/ - UINT8 DisableD0I3SettingForHeci; - -/** Offset 0x08D5 -**/ - UINT8 UnusedUpdSpace28; - -/** Offset 0x08D6 - HD Audio Reset Wait Timer - The delay timer after Azalia reset, the value is number of microseconds. Default is 600. -**/ - UINT16 PchHdaResetWaitTimer; - -/** Offset 0x08D8 - Enable LOCKDOWN SMI - Enable SMI_LOCK bit to prevent writes to the Global SMI Enable bit. - $EN_DIS -**/ - UINT8 PchLockDownGlobalSmi; - -/** Offset 0x08D9 - Enable LOCKDOWN BIOS Interface - Enable BIOS Interface Lock Down bit to prevent writes to the Backup Control Register. - $EN_DIS -**/ - UINT8 PchLockDownBiosInterface; - -/** Offset 0x08DA - Unlock all GPIO pads - Force all GPIO pads to be unlocked for debug purpose. - $EN_DIS -**/ - UINT8 PchUnlockGpioPads; - -/** Offset 0x08DB - PCH Unlock SideBand access - The SideBand PortID mask for certain end point (e.g. PSFx) will be locked before - 3rd party code execution. 0: Lock SideBand access; 1: Unlock SideBand access. - $EN_DIS -**/ - UINT8 PchSbAccessUnlock; - -/** Offset 0x08DC - PCIE RP Ltr Max Snoop Latency - Latency Tolerance Reporting, Max Snoop Latency. -**/ - UINT16 PcieRpLtrMaxSnoopLatency[24]; - -/** Offset 0x090C - PCIE RP Ltr Max No Snoop Latency - Latency Tolerance Reporting, Max Non-Snoop Latency. -**/ - UINT16 PcieRpLtrMaxNoSnoopLatency[24]; - -/** Offset 0x093C - PCIE RP Snoop Latency Override Mode - Latency Tolerance Reporting, Snoop Latency Override Mode. -**/ - UINT8 PcieRpSnoopLatencyOverrideMode[24]; - -/** Offset 0x0954 - PCIE RP Snoop Latency Override Multiplier - Latency Tolerance Reporting, Snoop Latency Override Multiplier. -**/ - UINT8 PcieRpSnoopLatencyOverrideMultiplier[24]; - -/** Offset 0x096C - PCIE RP Snoop Latency Override Value - Latency Tolerance Reporting, Snoop Latency Override Value. -**/ - UINT16 PcieRpSnoopLatencyOverrideValue[24]; - -/** Offset 0x099C - PCIE RP Non Snoop Latency Override Mode - Latency Tolerance Reporting, Non-Snoop Latency Override Mode. -**/ - UINT8 PcieRpNonSnoopLatencyOverrideMode[24]; - -/** Offset 0x09B4 - PCIE RP Non Snoop Latency Override Multiplier - Latency Tolerance Reporting, Non-Snoop Latency Override Multiplier. -**/ - UINT8 PcieRpNonSnoopLatencyOverrideMultiplier[24]; - -/** Offset 0x09CC - PCIE RP Non Snoop Latency Override Value - Latency Tolerance Reporting, Non-Snoop Latency Override Value. -**/ - UINT16 PcieRpNonSnoopLatencyOverrideValue[24]; - -/** Offset 0x09FC - PCIE RP Slot Power Limit Scale - Specifies scale used for slot power limit value. Leave as 0 to set to default. -**/ - UINT8 PcieRpSlotPowerLimitScale[24]; - -/** Offset 0x0A14 - PCIE RP Slot Power Limit Value - Specifies upper limit on power supplie by slot. Leave as 0 to set to default. -**/ - UINT16 PcieRpSlotPowerLimitValue[24]; - -/** Offset 0x0A44 - PCIE RP Upstream Port Transmiter Preset - Used during Gen3 Link Equalization. Used for all lanes. Default is 5. -**/ - UINT8 PcieRpUptp[24]; - -/** Offset 0x0A5C - PCIE RP Downstream Port Transmiter Preset - Used during Gen3 Link Equalization. Used for all lanes. Default is 7. -**/ - UINT8 PcieRpDptp[24]; - -/** Offset 0x0A74 - PCIE RP Enable Port8xh Decode - This member describes whether PCIE root port Port 8xh Decode is enabled. 0: Disable; - 1: Enable. - $EN_DIS -**/ - UINT8 PcieEnablePort8xhDecode; - -/** Offset 0x0A75 - PCIE Port8xh Decode Port Index - The Index of PCIe Port that is selected for Port8xh Decode (0 Based). -**/ - UINT8 PchPciePort8xhDecodePortIndex; - -/** Offset 0x0A76 - PCH Energy Reporting - Disable/Enable PCH to CPU energy report feature. - $EN_DIS -**/ - UINT8 PchPmDisableEnergyReport; - -/** Offset 0x0A77 - PCH Sata Test Mode - Allow entrance to the PCH SATA test modes. - $EN_DIS -**/ - UINT8 SataTestMode; - -/** Offset 0x0A78 - PCH USB OverCurrent mapping lock enable - If this policy option is enabled then BIOS will program OCCFDONE bit in xHCI meaning - that OC mapping data will be consumed by xHCI and OC mapping registers will be locked. - $EN_DIS -**/ - UINT8 PchXhciOcLock; - -/** Offset 0x0A79 - ReservedPchPostMemTest - Reserved for Pch Post-Mem Test - $EN_DIS -**/ - UINT8 ReservedPchPostMemTest[16]; - -/** Offset 0x0A89 - Mctp Broadcast Cycle - Test, Determine if MCTP Broadcast is enabled 0: Disable; 1: Enable. - $EN_DIS -**/ - UINT8 MctpBroadcastCycle; - -/** Offset 0x0A8A - Use DLL values from policy - Set if FSP should use HS400 DLL values from policy - $EN_DIS -**/ - UINT8 EmmcUseCustomDlls; - -/** Offset 0x0A8B -**/ - UINT8 UnusedUpdSpace29; - -/** Offset 0x0A8C - Emmc Tx CMD Delay control register value - Please see Tx CMD Delay Control register definition for help -**/ - UINT32 EmmcTxCmdDelayRegValue; - -/** Offset 0x0A90 - Emmc Tx DATA Delay control 1 register value - Please see Tx DATA Delay control 1 register definition for help -**/ - UINT32 EmmcTxDataDelay1RegValue; - -/** Offset 0x0A94 - Emmc Tx DATA Delay control 2 register value - Please see Tx DATA Delay control 2 register definition for help -**/ - UINT32 EmmcTxDataDelay2RegValue; - -/** Offset 0x0A98 - Emmc Rx CMD + DATA Delay control 1 register value - Please see Rx CMD + DATA Delay control 1 register definition for help -**/ - UINT32 EmmcRxCmdDataDelay1RegValue; - -/** Offset 0x0A9C - Emmc Rx CMD + DATA Delay control 2 register value - Please see Rx CMD + DATA Delay control 2 register definition for help -**/ - UINT32 EmmcRxCmdDataDelay2RegValue; - -/** Offset 0x0AA0 - Emmc Rx Strobe Delay control register value - Please see Rx Strobe Delay control register definition for help -**/ - UINT32 EmmcRxStrobeDelayRegValue; - -/** Offset 0x0AA4 - Use tuned DLL values from policy - Set if FSP should use HS400 DLL values from policy - $EN_DIS -**/ - UINT8 SdCardUseCustomDlls; - -/** Offset 0x0AA5 -**/ - UINT8 UnusedUpdSpace30[3]; - -/** Offset 0x0AA8 - SdCard Tx CMD Delay control register value - Please see Tx CMD Delay Control register definition for help -**/ - UINT32 SdCardTxCmdDelayRegValue; - -/** Offset 0x0AAC - SdCard Tx DATA Delay control 1 register value - Please see Tx DATA Delay control 1 register definition for help -**/ - UINT32 SdCardTxDataDelay1RegValue; - -/** Offset 0x0AB0 - SdCard Tx DATA Delay control 2 register value - Please see Tx DATA Delay control 2 register definition for help -**/ - UINT32 SdCardTxDataDelay2RegValue; - -/** Offset 0x0AB4 - SdCard Rx CMD + DATA Delay control 1 register value - Please see Rx CMD + DATA Delay control 1 register definition for help -**/ - UINT32 SdCardRxCmdDataDelay1RegValue; - -/** Offset 0x0AB8 - SdCard Rx CMD + DATA Delay control 2 register value - Please see Rx CMD + DATA Delay control 2 register definition for help -**/ - UINT32 SdCardRxCmdDataDelay2RegValue; - -/** Offset 0x0ABC - Enforce Enhanced Debug Mode - Determine if ME should enter Enhanced Debug Mode. 0: disable, 1: enable - $EN_DIS -**/ - UINT8 EnforceEDebugMode; - -/** Offset 0x0ABD -**/ - UINT8 UnusedUpdSpace31[7]; - -/** Offset 0x0AC4 -**/ - UINT8 ReservedFspsTestUpd[12]; -} FSP_S_TEST_CONFIG; - -/** Fsp S UPD Configuration -**/ -typedef struct { - -/** Offset 0x0000 -**/ - FSP_UPD_HEADER FspUpdHeader; - -/** Offset 0x0020 -**/ - FSP_S_CONFIG FspsConfig; - -/** Offset 0x07C0 -**/ - FSP_S_TEST_CONFIG FspsTestConfig; - -/** Offset 0x0AD0 -**/ - UINT8 UnusedUpdSpace32[6]; - -/** Offset 0x0AD6 -**/ - UINT16 UpdTerminator; -} FSPS_UPD; - -#pragma pack() - -#endif -- cgit v1.2.3