From 7bdae06170dffb86676b8f67df91614d8896149a Mon Sep 17 00:00:00 2001 From: Maulik V Vaghela Date: Wed, 20 Feb 2019 23:33:48 +0530 Subject: vendorcode/intel/fsp/fsp2_0/cml: Add FSP header files for Cometlake Adding header files for FSP for cometlake platform version 1034 Change-Id: I734316445dda5b1feb4098ce3c58b6dd8ce2d272 Signed-off-by: Maulik V Vaghela Reviewed-on: https://review.coreboot.org/c/31529 Tested-by: build bot (Jenkins) Reviewed-by: Rizwan Qureshi Reviewed-by: Subrata Banik Reviewed-by: Aamir Bohra --- .../intel/fsp/fsp2_0/cometlake/FspmUpd.h | 2865 ++++++++++++++++++++ 1 file changed, 2865 insertions(+) create mode 100644 src/vendorcode/intel/fsp/fsp2_0/cometlake/FspmUpd.h (limited to 'src/vendorcode/intel/fsp/fsp2_0/cometlake/FspmUpd.h') diff --git a/src/vendorcode/intel/fsp/fsp2_0/cometlake/FspmUpd.h b/src/vendorcode/intel/fsp/fsp2_0/cometlake/FspmUpd.h new file mode 100644 index 0000000000..85dbe70639 --- /dev/null +++ b/src/vendorcode/intel/fsp/fsp2_0/cometlake/FspmUpd.h @@ -0,0 +1,2865 @@ +/** @file + +Copyright (c) 2019, Intel Corporation. All rights reserved.
+ +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + + This file is automatically generated. Please do NOT modify !!! + +**/ + +#ifndef __FSPMUPD_H__ +#define __FSPMUPD_H__ + +#include + +#pragma pack(1) + + +#include + +/// +/// The ChipsetInit Info structure provides the information of ME ChipsetInit CRC and BIOS ChipsetInit CRC. +/// +typedef struct { + UINT8 Revision; ///< Chipset Init Info Revision + UINT8 Rsvd[3]; ///< Reserved + UINT16 MeChipInitCrc; ///< 16 bit CRC value of MeChipInit Table + UINT16 BiosChipInitCrc; ///< 16 bit CRC value of PchChipInit Table +} CHIPSET_INIT_INFO; + + +/** Fsp M Configuration +**/ +typedef struct { + +/** Offset 0x0040 - Platform Reserved Memory Size + The minimum platform memory size required to pass control into DXE +**/ + UINT64 PlatformMemorySize; + +/** Offset 0x0048 - Memory SPD Pointer Channel 0 Dimm 0 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 +**/ + UINT32 MemorySpdPtr00; + +/** Offset 0x004C - Memory SPD Pointer Channel 0 Dimm 1 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 +**/ + UINT32 MemorySpdPtr01; + +/** Offset 0x0050 - Memory SPD Pointer Channel 1 Dimm 0 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 +**/ + UINT32 MemorySpdPtr10; + +/** Offset 0x0054 - Memory SPD Pointer Channel 1 Dimm 1 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 +**/ + UINT32 MemorySpdPtr11; + +/** Offset 0x0058 - SPD Data Length + Length of SPD Data + 0x100:256 Bytes, 0x200:512 Bytes +**/ + UINT16 MemorySpdDataLen; + +/** Offset 0x005A - Dq Byte Map CH0 + Dq byte mapping between CPU and DRAM, Channel 0: board-dependent +**/ + UINT8 DqByteMapCh0[12]; + +/** Offset 0x0066 - Dq Byte Map CH1 + Dq byte mapping between CPU and DRAM, Channel 1: board-dependent +**/ + UINT8 DqByteMapCh1[12]; + +/** Offset 0x0072 - Dqs Map CPU to DRAM CH 0 + Set Dqs mapping relationship between CPU and DRAM, Channel 0: board-dependent +**/ + UINT8 DqsMapCpu2DramCh0[8]; + +/** Offset 0x007A - Dqs Map CPU to DRAM CH 1 + Set Dqs mapping relationship between CPU and DRAM, Channel 1: board-dependent +**/ + UINT8 DqsMapCpu2DramCh1[8]; + +/** Offset 0x0082 - RcompResister settings + Indicates RcompReister settings: CNL - 0's means MRC auto configured based on Design + Guidelines, otherwise input an Ohmic value per segment. CFL will need to provide + the appropriate values. +**/ + UINT16 RcompResistor[3]; + +/** Offset 0x0088 - RcompTarget settings + RcompTarget settings: CNL - 0's mean MRC auto configured based on Design Guidelines, + otherwise input an Ohmic value per segment. CFL will need to provide the appropriate values. +**/ + UINT16 RcompTarget[5]; + +/** Offset 0x0092 - Dqs Pins Interleaved Setting + Indicates DqPinsInterleaved setting: board-dependent + $EN_DIS +**/ + UINT8 DqPinsInterleaved; + +/** Offset 0x0093 - VREF_CA + CA Vref routing: board-dependent + 0:VREF_CA goes to both CH_A and CH_B, 1: VREF_CA to CH_A and VREF_DQ_A to CH_B, + 2:VREF_CA to CH_A and VREF_DQ_B to CH_B +**/ + UINT8 CaVrefConfig; + +/** Offset 0x0094 - Smram Mask + The SMM Regions AB-SEG and/or H-SEG reserved + 0: Neither, 1:AB-SEG, 2:H-SEG, 3: Both +**/ + UINT8 SmramMask; + +/** Offset 0x0095 - MRC Fast Boot + Enables/Disable the MRC fast path thru the MRC + $EN_DIS +**/ + UINT8 MrcFastBoot; + +/** Offset 0x0096 - Rank Margin Tool per Task + This option enables the user to execute Rank Margin Tool per major training step + in the MRC. + $EN_DIS +**/ + UINT8 RmtPerTask; + +/** Offset 0x0097 - Training Trace + This option enables the trained state tracing feature in MRC. This feature will + print out the key training parameters state across major training steps. + $EN_DIS +**/ + UINT8 TrainTrace; + +/** Offset 0x0098 - Intel Enhanced Debug + Intel Enhanced Debug (IED): 0=Disabled, 0x400000=Enabled and 4MB SMRAM occupied + 0 : Disable, 0x400000 : Enable +**/ + UINT32 IedSize; + +/** Offset 0x009C - Tseg Size + Size of SMRAM memory reserved. 0x400000 for Release build and 0x1000000 for Debug build + 0x0400000:4MB, 0x01000000:16MB +**/ + UINT32 TsegSize; + +/** Offset 0x00A0 - MMIO Size + Size of MMIO space reserved for devices. 0(Default)=Auto, non-Zero=size in MB +**/ + UINT16 MmioSize; + +/** Offset 0x00A2 - Probeless Trace + Probeless Trace: 0=Disabled, 1=Enable. Enabling Probeless Trace will reserve 128MB. + This also requires IED to be enabled. + $EN_DIS +**/ + UINT8 ProbelessTrace; + +/** Offset 0x00A3 - GDXC IOT SIZE + Size of IOT and MOT is in 8 MB chunks +**/ + UINT8 GdxcIotSize; + +/** Offset 0x00A4 - GDXC MOT SIZE + Size of IOT and MOT is in 8 MB chunks +**/ + UINT8 GdxcMotSize; + +/** Offset 0x00A5 - Spd Address Tabl + Specify SPD Address table for CH0D0/CH0D1/CH1D0&CH1D1. MemorySpdPtr will be used + if SPD Address is 00 +**/ + UINT8 SpdAddressTable[4]; + +/** Offset 0x00A9 - Internal Graphics Pre-allocated Memory + Size of memory preallocated for internal graphics. + 0x00:0 MB, 0x01:32 MB, 0x02:64 MB +**/ + UINT8 IgdDvmt50PreAlloc; + +/** Offset 0x00AA - Internal Graphics + Enable/disable internal graphics. + $EN_DIS +**/ + UINT8 InternalGfx; + +/** Offset 0x00AB - Aperture Size + Select the Aperture Size. + 0:128 MB, 1:256 MB, 2:512 MB +**/ + UINT8 ApertureSize; + +/** Offset 0x00AC - Board Type + MrcBoardType, Options are 0=Mobile/Mobile Halo, 1=Desktop/DT Halo, 5=ULT/ULX/Mobile + Halo, 7=UP Server + 0:Mobile/Mobile Halo, 1:Desktop/DT Halo, 5:ULT/ULX/Mobile Halo, 7:UP Server +**/ + UINT8 UserBd; + +/** Offset 0x00AD - SA GV + System Agent dynamic frequency support and when enabled memory will be training + at two different frequencies. Only effects ULX/ULT CPUs. 0=Disabled, 1=FixedLow, + 2=FixedHigh, and 3=Enabled. + 0:Disabled, 1:FixedLow, 2:FixedHigh, 3:Enabled +**/ + UINT8 SaGv; + +/** Offset 0x00AE - DDR Frequency Limit + Maximum Memory Frequency Selections in Mhz. Valid values should match the refclk, + i.e. divide by 133 or 100 + 1067:1067, 1333:1333, 1400:1400, 1600:1600, 1800:1800, 1867:1867, 2000:2000, 2133:2133, + 2200:2200, 2400:2400, 2600:2600, 2667:2667, 2800:2800, 2933:2933, 3000:3000, 3200:3200, 0:Auto +**/ + UINT16 DdrFreqLimit; + +/** Offset 0x00B0 - Low Frequency + SAGV Low Frequency Selections in Mhz. Options are 1067, 1333, 1600, 1867, 2133, + 2400, 2667, 2933 and 0 for Auto. + 1067:1067, 1333:1333, 1600:1600, 1867:1867, 2133:2133, 2400:2400, 2667:2667, 2933:2933, 0:Auto +**/ + UINT16 FreqSaGvLow; + +/** Offset 0x00B2 - Mid Frequency + SAGV Mid Frequency Selections in Mhz. Options are 1067, 1333, 1600, 1867, 2133, + 2400, 2667, 2933 and 0 for Auto. + 1067:1067, 1333:1333, 1600:1600, 1867:1867, 2133:2133, 2400:2400, 2667:2667, 2933:2933, 0:Auto +**/ + UINT16 FreqSaGvMid; + +/** Offset 0x00B4 - Rank Margin Tool + Enable/disable Rank Margin Tool. + $EN_DIS +**/ + UINT8 RMT; + +/** Offset 0x00B5 - Channel A DIMM Control + Channel A DIMM Control Support - Enable or Disable Dimms on Channel A. + 0:Enable both DIMMs, 1:Disable DIMM0, 2:Disable DIMM1, 3:Disable both DIMMs +**/ + UINT8 DisableDimmChannel0; + +/** Offset 0x00B6 - Channel B DIMM Control + Channel B DIMM Control Support - Enable or Disable Dimms on Channel B. + 0:Enable both DIMMs, 1:Disable DIMM0, 2:Disable DIMM1, 3:Disable both DIMMs +**/ + UINT8 DisableDimmChannel1; + +/** Offset 0x00B7 - Scrambler Support + This option enables data scrambling in memory. + $EN_DIS +**/ + UINT8 ScramblerSupport; + +/** Offset 0x00B8 - Skip Multi-Processor Initialization + When this is skipped, boot loader must initialize processors before SilicionInit + API. 0: Initialize; 1: Skip + $EN_DIS +**/ + UINT8 SkipMpInit; + +/** Offset 0x00B9 - SPD Profile Selected + Select DIMM timing profile. Options are 0=Default profile, 1=Custom profile, 2=XMP + Profile 1, 3=XMP Profile 2 + 0:Default profile, 1:Custom profile, 2:XMP profile 1, 3:XMP profile 2 +**/ + UINT8 SpdProfileSelected; + +/** Offset 0x00BA - Memory Reference Clock + 100MHz, 133MHz. + 0:133MHz, 1:100MHz +**/ + UINT8 RefClk; + +/** Offset 0x00BB +**/ + UINT8 UnusedUpdSpace0; + +/** Offset 0x00BC - Memory Voltage + Memory Voltage Override (Vddq). Default = no override + 0:Default, 1200:1.20 Volts, 1250:1.25 Volts, 1300:1.30 Volts, 1350:1.35 Volts, 1400:1.40 + Volts, 1450:1.45 Volts, 1500:1.50 Volts, 1550:1.55 Volts, 1600:1.60 Volts, 1650:1.65 Volts +**/ + UINT16 VddVoltage; + +/** Offset 0x00BE - Memory Ratio + Automatic or the frequency will equal ratio times reference clock. Set to Auto to + recalculate memory timings listed below. + 0:Auto, 4:4, 5:5, 6:6, 7:7, 8:8, 9:9, 10:10, 11:11, 12:12, 13:13, 14:14, 15:15 +**/ + UINT8 Ratio; + +/** Offset 0x00BF - QCLK Odd Ratio + Adds 133 or 100 MHz to QCLK frequency, depending on RefClk + $EN_DIS +**/ + UINT8 OddRatioMode; + +/** Offset 0x00C0 - tCL + CAS Latency, 0: AUTO, max: 31 +**/ + UINT8 tCL; + +/** Offset 0x00C1 - tCWL + Min CAS Write Latency Delay Time, 0: AUTO, max: 34 +**/ + UINT8 tCWL; + +/** Offset 0x00C2 - tRCD/tRP + RAS to CAS delay time and Row Precharge delay time, 0: AUTO, max: 63 +**/ + UINT8 tRCDtRP; + +/** Offset 0x00C3 - tRRD + Min Row Active to Row Active Delay Time, 0: AUTO, max: 15 +**/ + UINT8 tRRD; + +/** Offset 0x00C4 - tFAW + Min Four Activate Window Delay Time, 0: AUTO, max: 63 +**/ + UINT16 tFAW; + +/** Offset 0x00C6 - tRAS + RAS Active Time, 0: AUTO, max: 64 +**/ + UINT16 tRAS; + +/** Offset 0x00C8 - tREFI + Refresh Interval, 0: AUTO, max: 65535 +**/ + UINT16 tREFI; + +/** Offset 0x00CA - tRFC + Min Refresh Recovery Delay Time, 0: AUTO, max: 1023 +**/ + UINT16 tRFC; + +/** Offset 0x00CC - tRTP + Min Internal Read to Precharge Command Delay Time, 0: AUTO, max: 15. DDR4 legal + values: 5, 6, 7, 8, 9, 10, 12 +**/ + UINT8 tRTP; + +/** Offset 0x00CD - tWR + Min Write Recovery Time, 0: AUTO, legal values: 5, 6, 7, 8, 10, 12, 14, 16, 18, + 20, 24, 30, 34, 40 + 0:Auto, 5:5, 6:6, 7:7, 8:8, 10:10, 12:12, 14:14, 16:16, 18:18, 20:20, 24:24, 30:30, + 34:34, 40:40 +**/ + UINT8 tWR; + +/** Offset 0x00CE - tWTR + Min Internal Write to Read Command Delay Time, 0: AUTO, max: 28 +**/ + UINT8 tWTR; + +/** Offset 0x00CF - NMode + System command rate, range 0-2, 0 means auto, 1 = 1N, 2 = 2N +**/ + UINT8 NModeSupport; + +/** Offset 0x00D0 - DllBwEn[0] + DllBwEn[0], for 1067 (0..7) +**/ + UINT8 DllBwEn0; + +/** Offset 0x00D1 - DllBwEn[1] + DllBwEn[1], for 1333 (0..7) +**/ + UINT8 DllBwEn1; + +/** Offset 0x00D2 - DllBwEn[2] + DllBwEn[2], for 1600 (0..7) +**/ + UINT8 DllBwEn2; + +/** Offset 0x00D3 - DllBwEn[3] + DllBwEn[3], for 1867 and up (0..7) +**/ + UINT8 DllBwEn3; + +/** Offset 0x00D4 - ISVT IO Port Address + ISVT IO Port Address. 0=Minimal, 0xFF=Maximum, 0x99=Default +**/ + UINT8 IsvtIoPort; + +/** Offset 0x00D5 - CPU Trace Hub Mode + Select 'Target Debugger' if Trace Hub is used by target debugger software or 'Disable' + trace hub functionality. + 0: Disable, 1:Target Debugger Mode +**/ + UINT8 CpuTraceHubMode; + +/** Offset 0x00D6 - CPU Trace Hub Memory Region 0 + CPU Trace Hub Memory Region 0, The avaliable memory size is : 0MB, 1MB, 8MB, 64MB, + 128MB, 256MB, 512MB. Note : Limitation of total buffer size (CPU + PCH) is 512MB. + 0:0, 1:1MB, 2:8MB, 3:64MB, 4:128MB, 5:256MB, 6:512MB +**/ + UINT8 CpuTraceHubMemReg0Size; + +/** Offset 0x00D7 - CPU Trace Hub Memory Region 1 + CPU Trace Hub Memory Region 1. The avaliable memory size is : 0MB, 1MB, 8MB, 64MB, + 128MB, 256MB, 512MB. Note : Limitation of total buffer size (CPU + PCH) is 512MB. + 0:0, 1:1MB, 2:8MB, 3:64MB, 4:128MB, 5:256MB, 6:512MB +**/ + UINT8 CpuTraceHubMemReg1Size; + +/** Offset 0x00D8 - Enable or Disable Peci C10 Reset command + Enable or Disable Peci C10 Reset command. If Enabled, BIOS will send the CPU message + to disable peci reset on C10 exit. The default value is 0: Disable for CNL, + and 1: Enable for all other CPU's + $EN_DIS +**/ + UINT8 PeciC10Reset; + +/** Offset 0x00D9 - Enable or Disable Peci Sx Reset command + Enable or Disable Peci Sx Reset command; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 PeciSxReset; + +/** Offset 0x00DA - HECI Timeouts + 0: Disable, 1: Enable (Default) timeout check for HECI + $EN_DIS +**/ + UINT8 HeciTimeouts; + +/** Offset 0x00DB +**/ + UINT8 UnusedUpdSpace1; + +/** Offset 0x00DC - HECI1 BAR address + BAR address of HECI1 +**/ + UINT32 Heci1BarAddress; + +/** Offset 0x00E0 - HECI2 BAR address + BAR address of HECI2 +**/ + UINT32 Heci2BarAddress; + +/** Offset 0x00E4 - HECI3 BAR address + BAR address of HECI3 +**/ + UINT32 Heci3BarAddress; + +/** Offset 0x00E8 - SG dGPU Power Delay + SG dGPU delay interval after power enabling: 0=Minimal, 1000=Maximum, default is + 300=300 microseconds +**/ + UINT16 SgDelayAfterPwrEn; + +/** Offset 0x00EA - SG dGPU Reset Delay + SG dGPU delay interval for Reset complete: 0=Minimal, 1000=Maximum, default is 100=100 + microseconds +**/ + UINT16 SgDelayAfterHoldReset; + +/** Offset 0x00EC - MMIO size adjustment for AUTO mode + Positive number means increasing MMIO size, Negative value means decreasing MMIO + size: 0 (Default)=no change to AUTO mode MMIO size +**/ + UINT16 MmioSizeAdjustment; + +/** Offset 0x00EE - Enable/Disable DMI GEN3 Static EQ Phase1 programming + Program DMI Gen3 EQ Phase1 Static Presets. Disabled(0x0): Disable EQ Phase1 Static + Presets Programming, Enabled(0x1)(Default): Enable EQ Phase1 Static Presets Programming + $EN_DIS +**/ + UINT8 DmiGen3ProgramStaticEq; + +/** Offset 0x00EF - Enable/Disable PEG 0 + Disabled(0x0): Disable PEG Port, Enabled(0x1): Enable PEG Port (If Silicon SKU permits + it), Auto(0x2)(Default): If an endpoint is present, enable the PEG Port, Disable otherwise + 0:Disable, 1:Enable, 2:AUTO +**/ + UINT8 Peg0Enable; + +/** Offset 0x00F0 - Enable/Disable PEG 1 + Disabled(0x0): Disable PEG Port, Enabled(0x1): Enable PEG Port (If Silicon SKU permits + it), Auto(0x2)(Default): If an endpoint is present, enable the PEG Port, Disable otherwise + 0:Disable, 1:Enable, 2:AUTO +**/ + UINT8 Peg1Enable; + +/** Offset 0x00F1 - Enable/Disable PEG 2 + Disabled(0x0): Disable PEG Port, Enabled(0x1): Enable PEG Port (If Silicon SKU permits + it), Auto(0x2)(Default): If an endpoint is present, enable the PEG Port, Disable otherwise + 0:Disable, 1:Enable, 2:AUTO +**/ + UINT8 Peg2Enable; + +/** Offset 0x00F2 - Enable/Disable PEG 3 + Disabled(0x0): Disable PEG Port, Enabled(0x1): Enable PEG Port (If Silicon SKU permits + it), Auto(0x2)(Default): If an endpoint is present, enable the PEG Port, Disable otherwise + 0:Disable, 1:Enable, 2:AUTO +**/ + UINT8 Peg3Enable; + +/** Offset 0x00F3 - PEG 0 Max Link Speed + Auto (Default)(0x0): Maximum possible link speed, Gen1(0x1): Limit Link to Gen1 + Speed, Gen2(0x2): Limit Link to Gen2 Speed, Gen3(0x3):Limit Link to Gen3 Speed + 0:Auto, 1:Gen1, 2:Gen2, 3:Gen3 +**/ + UINT8 Peg0MaxLinkSpeed; + +/** Offset 0x00F4 - PEG 1 Max Link Speed + Auto (Default)(0x0): Maximum possible link speed, Gen1(0x1): Limit Link to Gen1 + Speed, Gen2(0x2): Limit Link to Gen2 Speed, Gen3(0x3):Limit Link to Gen3 Speed + 0:Auto, 1:Gen1, 2:Gen2, 3:Gen3 +**/ + UINT8 Peg1MaxLinkSpeed; + +/** Offset 0x00F5 - PEG 2 Max Link Speed + Auto (Default)(0x0): Maximum possible link speed, Gen1(0x1): Limit Link to Gen1 + Speed, Gen2(0x2): Limit Link to Gen2 Speed, Gen3(0x3):Limit Link to Gen3 Speed + 0:Auto, 1:Gen1, 2:Gen2, 3:Gen3 +**/ + UINT8 Peg2MaxLinkSpeed; + +/** Offset 0x00F6 - PEG 3 Max Link Speed + Auto (Default)(0x0): Maximum possible link speed, Gen1(0x1): Limit Link to Gen1 + Speed, Gen2(0x2): Limit Link to Gen2 Speed, Gen3(0x3):Limit Link to Gen3 Speed + 0:Auto, 1:Gen1, 2:Gen2, 3:Gen3 +**/ + UINT8 Peg3MaxLinkSpeed; + +/** Offset 0x00F7 - PEG 0 Max Link Width + Auto (Default)(0x0): Maximum possible link width, (0x1): Limit Link to x1, (0x2): + Limit Link to x2, (0x3):Limit Link to x4, (0x4): Limit Link to x8 + 0:Auto, 1:x1, 2:x2, 3:x4, 4:x8 +**/ + UINT8 Peg0MaxLinkWidth; + +/** Offset 0x00F8 - PEG 1 Max Link Width + Auto (Default)(0x0): Maximum possible link width, (0x1): Limit Link to x1, (0x2): + Limit Link to x2, (0x3):Limit Link to x4 + 0:Auto, 1:x1, 2:x2, 3:x4 +**/ + UINT8 Peg1MaxLinkWidth; + +/** Offset 0x00F9 - PEG 2 Max Link Width + Auto (Default)(0x0): Maximum possible link width, (0x1): Limit Link to x1, (0x2): + Limit Link to x2 + 0:Auto, 1:x1, 2:x2 +**/ + UINT8 Peg2MaxLinkWidth; + +/** Offset 0x00FA - PEG 3 Max Link Width + Auto (Default)(0x0): Maximum possible link width, (0x1): Limit Link to x1, (0x2): + Limit Link to x2 + 0:Auto, 1:x1, 2:x2 +**/ + UINT8 Peg3MaxLinkWidth; + +/** Offset 0x00FB - Power down unused lanes on PEG 0 + (0x0): Do not power down any lane, (0x1): Bios will power down unused lanes based + on the max possible link width + 0:No power saving, 1:Auto +**/ + UINT8 Peg0PowerDownUnusedLanes; + +/** Offset 0x00FC - Power down unused lanes on PEG 1 + (0x0): Do not power down any lane, (0x1): Bios will power down unused lanes based + on the max possible link width + 0:No power saving, 1:Auto +**/ + UINT8 Peg1PowerDownUnusedLanes; + +/** Offset 0x00FD - Power down unused lanes on PEG 2 + (0x0): Do not power down any lane, (0x1): Bios will power down unused lanes based + on the max possible link width + 0:No power saving, 1:Auto +**/ + UINT8 Peg2PowerDownUnusedLanes; + +/** Offset 0x00FE - Power down unused lanes on PEG 3 + (0x0): Do not power down any lane, (0x1): Bios will power down unused lanes based + on the max possible link width + 0:No power saving, 1:Auto +**/ + UINT8 Peg3PowerDownUnusedLanes; + +/** Offset 0x00FF - PCIe ASPM programming will happen in relation to the Oprom + Select when PCIe ASPM programming will happen in relation to the Oprom. Before(0x0)(Default): + Do PCIe ASPM programming before Oprom, After(0x1): Do PCIe ASPM programming after + Oprom, requires an SMI handler to save/restore ASPM settings during S3 resume + 0:Before, 1:After +**/ + UINT8 InitPcieAspmAfterOprom; + +/** Offset 0x0100 - PCIe Disable Spread Spectrum Clocking + PCIe Disable Spread Spectrum Clocking. Normal Operation(0x0)(Default) - SSC enabled, + Disable SSC(0X1) - Disable SSC per platform design or for compliance testing + 0:Normal Operation, 1:Disable SSC +**/ + UINT8 PegDisableSpreadSpectrumClocking; + +/** Offset 0x0101 - DMI Gen3 Root port preset values per lane + Used for programming DMI Gen3 preset values per lane. Range: 0-9, 8 is default for each lane +**/ + UINT8 DmiGen3RootPortPreset[8]; + +/** Offset 0x0109 - DMI Gen3 End port preset values per lane + Used for programming DMI Gen3 preset values per lane. Range: 0-9, 7 is default for each lane +**/ + UINT8 DmiGen3EndPointPreset[8]; + +/** Offset 0x0111 - DMI Gen3 End port Hint values per lane + Used for programming DMI Gen3 Hint values per lane. Range: 0-6, 2 is default for each lane +**/ + UINT8 DmiGen3EndPointHint[8]; + +/** Offset 0x0119 - DMI Gen3 RxCTLEp per-Bundle control + Range: 0-15, 0 is default for each bundle, must be specified based upon platform design +**/ + UINT8 DmiGen3RxCtlePeaking[4]; + +/** Offset 0x011D - Thermal Velocity Boost Ratio clipping + 0(Default): Disabled, 1: Enabled. This service controls Core frequency reduction + caused by high package temperatures for processors that implement the Intel Thermal + Velocity Boost (TVB) feature + 0: Disabled, 1: Enabled +**/ + UINT8 TvbRatioClipping; + +/** Offset 0x011E - Thermal Velocity Boost voltage optimization + 0: Disabled, 1: Enabled(Default). This service controls thermal based voltage optimizations + for processors that implement the Intel Thermal Velocity Boost (TVB) feature. + 0: Disabled, 1: Enabled +**/ + UINT8 TvbVoltageOptimization; + +/** Offset 0x011F - PEG Gen3 RxCTLEp per-Bundle control + Range: 0-15, 12 is default for each bundle, must be specified based upon platform design +**/ + UINT8 PegGen3RxCtlePeaking[10]; + +/** Offset 0x0129 +**/ + UINT8 UnusedUpdSpace2[3]; + +/** Offset 0x012C - Memory data pointer for saved preset search results + The reference code will store the Gen3 Preset Search results in the SaDataHob's + PegData structure (SA_PEG_DATA) and platform code can save/restore this data to + skip preset search in the following boots. Range: 0-0xFFFFFFFF, default is 0 +**/ + UINT32 PegDataPtr; + +/** Offset 0x0130 - PEG PERST# GPIO information + The reference code will use the information in this structure in order to reset + PCIe Gen3 devices during equalization, if necessary +**/ + UINT8 PegGpioData[28]; + +/** Offset 0x014C - PCIe Hot Plug Enable/Disable per port + 0(Default): Disable, 1: Enable +**/ + UINT8 PegRootPortHPE[4]; + +/** Offset 0x0150 - DeEmphasis control for DMI + DeEmphasis control for DMI. 0=-6dB, 1(Default)=-3.5 dB + 0: -6dB, 1: -3.5dB +**/ + UINT8 DmiDeEmphasis; + +/** Offset 0x0151 - Selection of the primary display device + 0=iGFX, 1=PEG, 2=PCIe Graphics on PCH, 3(Default)=AUTO, 4=Switchable Graphics + 0:iGFX, 1:PEG, 2:PCIe Graphics on PCH, 3:AUTO, 4:Switchable Graphics +**/ + UINT8 PrimaryDisplay; + +/** Offset 0x0152 - Selection of iGFX GTT Memory size + 1=2MB, 2=4MB, 3=8MB, Default is 3 + 1:2MB, 2:4MB, 3:8MB +**/ + UINT16 GttSize; + +/** Offset 0x0154 - Temporary MMIO address for GMADR + The reference code will use this as Temporary MMIO address space to access GMADR + Registers.Platform should provide conflict free Temporary MMIO Range: GmAdr to + (GmAdr + ApertureSize). Default is (PciExpressBaseAddress - ApertureSize) to (PciExpressBaseAddress + - 0x1) (Where ApertureSize = 256MB) +**/ + UINT32 GmAdr; + +/** Offset 0x0158 - Temporary MMIO address for GTTMMADR + The reference code will use this as Temporary MMIO address space to access GTTMMADR + Registers.Platform should provide conflict free Temporary MMIO Range: GttMmAdr + to (GttMmAdr + 2MB MMIO + 6MB Reserved + GttSize). Default is (GmAdr - (2MB MMIO + + 6MB Reserved + GttSize)) to (GmAdr - 0x1) (Where GttSize = 8MB) +**/ + UINT32 GttMmAdr; + +/** Offset 0x015C - Selection of PSMI Region size + 0=32MB, 1=288MB, 2=544MB, 3=800MB, 4=1024MB Default is 0 + 0:32MB, 1:288MB, 2:544MB, 3:800MB, 4:1024MB +**/ + UINT8 PsmiRegionSize; + +/** Offset 0x015D - Switchable Graphics GPIO information for PEG 0 + Switchable Graphics GPIO information for PEG 0, for Reset, power and wake GPIOs +**/ + UINT8 SaRtd3Pcie0Gpio[24]; + +/** Offset 0x0175 - Switchable Graphics GPIO information for PEG 1 + Switchable Graphics GPIO information for PEG 1, for Reset, power and wake GPIOs +**/ + UINT8 SaRtd3Pcie1Gpio[24]; + +/** Offset 0x018D - Switchable Graphics GPIO information for PEG 2 + Switchable Graphics GPIO information for PEG 2, for Reset, power and wake GPIOs +**/ + UINT8 SaRtd3Pcie2Gpio[24]; + +/** Offset 0x01A5 - Switchable Graphics GPIO information for PEG 3 + Switchable Graphics GPIO information for PEG 3, for Reset, power and wake GPIOs +**/ + UINT8 SaRtd3Pcie3Gpio[24]; + +/** Offset 0x01BD - Enable/Disable MRC TXT dependency + When enabled MRC execution will wait for TXT initialization to be done first. Disabled(0x0)(Default): + MRC will not wait for TXT initialization, Enabled(0x1): MRC will wait for TXT initialization + $EN_DIS +**/ + UINT8 TxtImplemented; + +/** Offset 0x01BE - Enable/Disable SA OcSupport + Enable: Enable SA OcSupport, Disable(Default): Disable SA OcSupport + $EN_DIS +**/ + UINT8 SaOcSupport; + +/** Offset 0x01BF - GT slice Voltage Mode + 0(Default): Adaptive, 1: Override + 0: Adaptive, 1: Override +**/ + UINT8 GtVoltageMode; + +/** Offset 0x01C0 - Maximum GTs turbo ratio override + 0(Default)=Minimal/Auto, 60=Maximum +**/ + UINT8 GtMaxOcRatio; + +/** Offset 0x01C1 +**/ + UINT8 UnusedUpdSpace3; + +/** Offset 0x01C2 - The voltage offset applied to GT slice + 0(Default)=Minimal, 1000=Maximum +**/ + UINT16 GtVoltageOffset; + +/** Offset 0x01C4 - The GT slice voltage override which is applied to the entire range of GT frequencies + 0(Default)=Minimal, 2000=Maximum +**/ + UINT16 GtVoltageOverride; + +/** Offset 0x01C6 - adaptive voltage applied during turbo frequencies + 0(Default)=Minimal, 2000=Maximum +**/ + UINT16 GtExtraTurboVoltage; + +/** Offset 0x01C8 - voltage offset applied to the SA + 0(Default)=Minimal, 1000=Maximum +**/ + UINT16 SaVoltageOffset; + +/** Offset 0x01CA - PCIe root port Function number for Switchable Graphics dGPU + Root port Index number to indicate which PCIe root port has dGPU +**/ + UINT8 RootPortIndex; + +/** Offset 0x01CB - Realtime Memory Timing + 0(Default): Disabled, 1: Enabled. When enabled, it will allow the system to perform + realtime memory timing changes after MRC_DONE. + 0: Disabled, 1: Enabled +**/ + UINT8 RealtimeMemoryTiming; + +/** Offset 0x01CC - Enable/Disable SA IPU + Enable(Default): Enable SA IPU, Disable: Disable SA IPU + $EN_DIS +**/ + UINT8 SaIpuEnable; + +/** Offset 0x01CD - IPU IMR Configuration + 0:IPU Camera, 1:IPU Gen Default is 0 + 0:IPU Camera, 1:IPU Gen +**/ + UINT8 SaIpuImrConfiguration; + +/** Offset 0x01CE - Selection of PSMI Support On/Off + 0(Default) = FALSE, 1 = TRUE. When TRUE, it will allow the PSMI Support + $EN_DIS +**/ + UINT8 GtPsmiSupport; + +/** Offset 0x01CF - GT unslice Voltage Mode + 0(Default): Adaptive, 1: Override + 0: Adaptive, 1: Override +**/ + UINT8 GtusVoltageMode; + +/** Offset 0x01D0 - voltage offset applied to GT unslice + 0(Default)=Minimal, 2000=Maximum +**/ + UINT16 GtusVoltageOffset; + +/** Offset 0x01D2 - GT unslice voltage override which is applied to the entire range of GT frequencies + 0(Default)=Minimal, 2000=Maximum +**/ + UINT16 GtusVoltageOverride; + +/** Offset 0x01D4 - adaptive voltage applied during turbo frequencies + 0(Default)=Minimal, 2000=Maximum +**/ + UINT16 GtusExtraTurboVoltage; + +/** Offset 0x01D6 - Maximum GTus turbo ratio override + 0(Default)=Minimal, 60=Maximum +**/ + UINT8 GtusMaxOcRatio; + +/** Offset 0x01D7 - SaPreMemProductionRsvd + Reserved for SA Pre-Mem Production + $EN_DIS +**/ + UINT8 SaPreMemProductionRsvd[4]; + +/** Offset 0x01DB - BIST on Reset + Enable or Disable BIST on Reset; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 BistOnReset; + +/** Offset 0x01DC - Skip Stop PBET Timer Enable/Disable + Skip Stop PBET Timer; 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 SkipStopPbet; + +/** Offset 0x01DD - C6DRAM power gating feature + This policy indicates whether or not BIOS should allocate PRMRR memory for C6DRAM + power gating feature.- 0: Don't allocate any PRMRR memory for C6DRAM power gating + feature.- 1: Allocate PRMRR memory for C6DRAM power gating feature. + $EN_DIS +**/ + UINT8 EnableC6Dram; + +/** Offset 0x01DE - Over clocking support + Over clocking support; 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 OcSupport; + +/** Offset 0x01DF - Over clocking Lock + Over clocking Lock Enable/Disable; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 OcLock; + +/** Offset 0x01E0 - Maximum Core Turbo Ratio Override + Maximum core turbo ratio override allows to increase CPU core frequency beyond the + fused max turbo ratio limit. 0: Hardware defaults. Range: 0-255 +**/ + UINT8 CoreMaxOcRatio; + +/** Offset 0x01E1 - Core voltage mode + Core voltage mode; 0: Adaptive; 1: Override. + $EN_DIS +**/ + UINT8 CoreVoltageMode; + +/** Offset 0x01E2 - Program Cache Attributes + Program Cache Attributes; 0: Program; 1: Disable Program. + $EN_DIS +**/ + UINT8 DisableMtrrProgram; + +/** Offset 0x01E3 - Maximum clr turbo ratio override + Maximum clr turbo ratio override allows to increase CPU clr frequency beyond the + fused max turbo ratio limit. 0: Hardware defaults. Range: 0-255 +**/ + UINT8 RingMaxOcRatio; + +/** Offset 0x01E4 - Hyper Threading Enable/Disable + Enable or Disable Hyper Threading; 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 HyperThreading; + +/** Offset 0x01E5 - CPU ratio value + CPU ratio value. Valid Range 0 to 63. CPU Ratio is 0 when disabled. +**/ + UINT8 CpuRatio; + +/** Offset 0x01E6 - Boot frequency + Sets the boot frequency starting from reset vector.- 0: Maximum battery performance.- + 1: Maximum non-turbo performance.- 2: Turbo performance. @note If Turbo + is selected BIOS will start in max non-turbo mode and switch to Turbo mode. + 0:0, 1:1, 2:2 +**/ + UINT8 BootFrequency; + +/** Offset 0x01E7 - Number of active cores + Number of active cores(Depends on Number of cores). 0: All;1: 1 ;2: + 2 ;3: 3 + 0:All, 1:1, 2:2, 3:3 +**/ + UINT8 ActiveCoreCount; + +/** Offset 0x01E8 - Processor Early Power On Configuration FCLK setting + 0: 800 MHz (ULT/ULX). 1: 1 GHz (DT/Halo). Not supported on ULT/ULX.- + 2: 400 MHz. - 3: Reserved + 0:800 MHz, 1: 1 GHz, 2: 400 MHz, 3: Reserved +**/ + UINT8 FClkFrequency; + +/** Offset 0x01E9 - Set JTAG power in C10 and deeper power states + False: JTAG is power gated in C10 state. True: keeps the JTAG power up during C10 + and deeper power states for debug purpose. 0: False; 1: True. + 0: False, 1: True +**/ + UINT8 JtagC10PowerGateDisable; + +/** Offset 0x01EA - Enable or Disable VMX + Enable or Disable VMX; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 VmxEnable; + +/** Offset 0x01EB - AVX2 Ratio Offset + 0(Default)= No Offset. Range 0 - 31. Specifies number of bins to decrease AVX ratio + vs. Core Ratio. Uses Mailbox MSR 0x150, cmd 0x1B. +**/ + UINT8 Avx2RatioOffset; + +/** Offset 0x01EC - AVX3 Ratio Offset + 0(Default)= No Offset. Range 0 - 31. Specifies number of bins to decrease AVX ratio + vs. Core Ratio. Uses Mailbox MSR 0x150, cmd 0x1B. +**/ + UINT8 Avx3RatioOffset; + +/** Offset 0x01ED - BCLK Adaptive Voltage Enable + When enabled, the CPU V/F curves are aware of BCLK frequency when calculated. 0: + Disable; 1: Enable + $EN_DIS +**/ + UINT8 BclkAdaptiveVoltage; + +/** Offset 0x01EE - Core PLL voltage offset + Core PLL voltage offset. 0: No offset. Range 0-63 +**/ + UINT8 CorePllVoltageOffset; + +/** Offset 0x01EF +**/ + UINT8 UnusedUpdSpace4; + +/** Offset 0x01F0 - core voltage override + The core voltage override which is applied to the entire range of cpu core frequencies. + Valid Range 0 to 2000 +**/ + UINT16 CoreVoltageOverride; + +/** Offset 0x01F2 - Core Turbo voltage Adaptive + Extra Turbo voltage applied to the cpu core when the cpu is operating in turbo mode. + Valid Range 0 to 2000 +**/ + UINT16 CoreVoltageAdaptive; + +/** Offset 0x01F4 - Core Turbo voltage Offset + The voltage offset applied to the core while operating in turbo mode.Valid Range 0 to 1000 +**/ + UINT16 CoreVoltageOffset; + +/** Offset 0x01F6 - Ring Downbin + Ring Downbin enable/disable. When enabled, CPU will ensure the ring ratio is always + lower than the core ratio.0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 RingDownBin; + +/** Offset 0x01F7 - Ring voltage mode + Ring voltage mode; 0: Adaptive; 1: Override. + $EN_DIS +**/ + UINT8 RingVoltageMode; + +/** Offset 0x01F8 - Ring voltage override + The ring voltage override which is applied to the entire range of cpu ring frequencies. + Valid Range 0 to 2000 +**/ + UINT16 RingVoltageOverride; + +/** Offset 0x01FA - Ring Turbo voltage Adaptive + Extra Turbo voltage applied to the cpu ring when the cpu is operating in turbo mode. + Valid Range 0 to 2000 +**/ + UINT16 RingVoltageAdaptive; + +/** Offset 0x01FC - Ring Turbo voltage Offset + The voltage offset applied to the ring while operating in turbo mode. Valid Range 0 to 1000 +**/ + UINT16 RingVoltageOffset; + +/** Offset 0x01FE - TjMax Offset + TjMax offset.Specified value here is clipped by pCode (125 - TjMax Offset) to support + TjMax in the range of 62 to 115 deg Celsius. Valid Range 10 - 63 +**/ + UINT8 TjMaxOffset; + +/** Offset 0x01FF - BiosGuard + Enable/Disable. 0: Disable, Enable/Disable BIOS Guard feature, 1: enable + $EN_DIS +**/ + UINT8 BiosGuard; + +/** Offset 0x0200 +**/ + UINT8 BiosGuardToolsInterface; + +/** Offset 0x0201 - EnableSgx + Enable/Disable. 0: Disable, Enable/Disable SGX feature, 1: enable, 2: Software Control + 0: Disable, 1: Enable, 2: Software Control +**/ + UINT8 EnableSgx; + +/** Offset 0x0202 - Txt + Enable/Disable. 0: Disable, Enable/Disable Txt feature, 1: enable + $EN_DIS +**/ + UINT8 Txt; + +/** Offset 0x0203 +**/ + UINT8 UnusedUpdSpace5; + +/** Offset 0x0204 - PrmrrSize + 0=Invalid, 32MB=0x2000000, 64MB=0x4000000, 128MB=0x8000000, 256MB=0x10000000 +**/ + UINT32 PrmrrSize; + +/** Offset 0x0208 - SinitMemorySize + Enable/Disable. 0: Disable, define default value of SinitMemorySize , 1: enable +**/ + UINT32 SinitMemorySize; + +/** Offset 0x020C - TxtHeapMemorySize + Enable/Disable. 0: Disable, define default value of TxtHeapMemorySize , 1: enable +**/ + UINT32 TxtHeapMemorySize; + +/** Offset 0x0210 - TxtDprMemorySize + Enable/Disable. 0: Disable, define default value of TxtDprMemorySize , 1: enable +**/ + UINT32 TxtDprMemorySize; + +/** Offset 0x0214 +**/ + UINT8 UnusedUpdSpace6[4]; + +/** Offset 0x0218 - TxtDprMemoryBase + Enable/Disable. 0: Disable, define default value of TxtDprMemoryBase , 1: enable +**/ + UINT64 TxtDprMemoryBase; + +/** Offset 0x0220 - BiosAcmBase + Enable/Disable. 0: Disable, define default value of BiosAcmBase , 1: enable +**/ + UINT32 BiosAcmBase; + +/** Offset 0x0224 - BiosAcmSize + Enable/Disable. 0: Disable, define default value of BiosAcmSize , 1: enable +**/ + UINT32 BiosAcmSize; + +/** Offset 0x0228 - ApStartupBase + Enable/Disable. 0: Disable, define default value of BiosAcmBase , 1: enable +**/ + UINT32 ApStartupBase; + +/** Offset 0x022C - TgaSize + Enable/Disable. 0: Disable, define default value of TgaSize , 1: enable +**/ + UINT32 TgaSize; + +/** Offset 0x0230 - TxtLcpPdBase + Enable/Disable. 0: Disable, define default value of TxtLcpPdBase , 1: enable +**/ + UINT64 TxtLcpPdBase; + +/** Offset 0x0238 - TxtLcpPdSize + Enable/Disable. 0: Disable, define default value of TxtLcpPdSize , 1: enable +**/ + UINT64 TxtLcpPdSize; + +/** Offset 0x0240 - IsTPMPresence + IsTPMPresence default values +**/ + UINT8 IsTPMPresence; + +/** Offset 0x0241 - ReservedSecurityPreMem + Reserved for Security Pre-Mem + $EN_DIS +**/ + UINT8 ReservedSecurityPreMem[3]; + +/** Offset 0x0244 - Base addresses for VT-d function MMIO access + Base addresses for VT-d MMIO access per VT-d engine +**/ + UINT32 VtdBaseAddress[3]; + +/** Offset 0x0250 - Enable SMBus + Enable/disable SMBus controller. + $EN_DIS +**/ + UINT8 SmbusEnable; + +/** Offset 0x0251 - Platform Debug Consent + To 'opt-in' for debug, please select 'Enabled' with the desired debug probe type. + Enabling this BIOS option may alter the default value of other debug-related BIOS + options. Note: DCI OOB (aka BSSB) uses CCA probe; [DCI OOB+DbC] and [USB2 DbC] + have the same setting + 0:Disabled, 1:Enabled (DCI OOB+[DbC]), 2:Enabled (DCI OOB), 3:Enabled (USB3 DbC), + 4:Enabled (XDP/MIPI60), 5:Enabled (USB2 DbC) +**/ + UINT8 PlatformDebugConsent; + +/** Offset 0x0252 - USB3 Type-C UFP2DFP Kernel/Platform Debug Support + This BIOS option enables kernel and platform debug for USB3 interface over a UFP + Type-C receptacle, select 'No Change' will do nothing to UFP2DFP setting. + 0:Disabled, 1:Enabled, 2:No Change +**/ + UINT8 DciUsb3TypecUfpDbg; + +/** Offset 0x0253 - PCH Trace Hub Mode + Select 'Host Debugger' if Trace Hub is used with host debugger tool or 'Target Debugger' + if Trace Hub is used by target debugger software or 'Disable' trace hub functionality. + 0: Disable, 1: Target Debugger Mode, 2: Host Debugger Mode +**/ + UINT8 PchTraceHubMode; + +/** Offset 0x0254 - PCH Trace Hub Memory Region 0 buffer Size + Specify size of Pch trace memory region 0 buffer, the size can be 0, 1MB, 8MB, 64MB, + 128MB, 256MB, 512MB. Note : Limitation of total buffer size (PCH + CPU) is 512MB. + 0:0, 1:1MB, 2:8MB, 3:64MB, 4:128MB, 5:256MB, 6:512MB +**/ + UINT8 PchTraceHubMemReg0Size; + +/** Offset 0x0255 - PCH Trace Hub Memory Region 1 buffer Size + Specify size of Pch trace memory region 1 buffer, the size can be 0, 1MB, 8MB, 64MB, + 128MB, 256MB, 512MB. Note : Limitation of total buffer size (PCH + CPU) is 512MB. + 0:0, 1:1MB, 2:8MB, 3:64MB, 4:128MB, 5:256MB, 6:512MB +**/ + UINT8 PchTraceHubMemReg1Size; + +/** Offset 0x0256 - Enable Intel HD Audio (Azalia) + 0: Disable, 1: Enable (Default) Azalia controller + $EN_DIS +**/ + UINT8 PchHdaEnable; + +/** Offset 0x0257 - Enable PCH ISH Controller + 0: Disable, 1: Enable (Default) ISH Controller + $EN_DIS +**/ + UINT8 PchIshEnable; + +/** Offset 0x0258 - Enable PCH HSIO PCIE Rx Set Ctle + Enable PCH PCIe Gen 3 Set CTLE Value. +**/ + UINT8 PchPcieHsioRxSetCtleEnable[24]; + +/** Offset 0x0270 - PCH HSIO PCIE Rx Set Ctle Value + PCH PCIe Gen 3 Set CTLE Value. +**/ + UINT8 PchPcieHsioRxSetCtle[24]; + +/** Offset 0x0288 - Enble PCH HSIO PCIE TX Gen 1 Downscale Amplitude Adjustment value override + 0: Disable; 1: Enable. +**/ + UINT8 PchPcieHsioTxGen1DownscaleAmpEnable[24]; + +/** Offset 0x02A0 - PCH HSIO PCIE Gen 2 TX Output Downscale Amplitude Adjustment value + PCH PCIe Gen 2 TX Output Downscale Amplitude Adjustment value. +**/ + UINT8 PchPcieHsioTxGen1DownscaleAmp[24]; + +/** Offset 0x02B8 - Enable PCH HSIO PCIE TX Gen 2 Downscale Amplitude Adjustment value override + 0: Disable; 1: Enable. +**/ + UINT8 PchPcieHsioTxGen2DownscaleAmpEnable[24]; + +/** Offset 0x02D0 - PCH HSIO PCIE Gen 2 TX Output Downscale Amplitude Adjustment value + PCH PCIe Gen 2 TX Output Downscale Amplitude Adjustment value. +**/ + UINT8 PchPcieHsioTxGen2DownscaleAmp[24]; + +/** Offset 0x02E8 - Enable PCH HSIO PCIE TX Gen 3 Downscale Amplitude Adjustment value override + 0: Disable; 1: Enable. +**/ + UINT8 PchPcieHsioTxGen3DownscaleAmpEnable[24]; + +/** Offset 0x0300 - PCH HSIO PCIE Gen 3 TX Output Downscale Amplitude Adjustment value + PCH PCIe Gen 3 TX Output Downscale Amplitude Adjustment value. +**/ + UINT8 PchPcieHsioTxGen3DownscaleAmp[24]; + +/** Offset 0x0318 - Enable PCH HSIO PCIE Gen 1 TX Output De-Emphasis Adjustment Setting value override + 0: Disable; 1: Enable. +**/ + UINT8 PchPcieHsioTxGen1DeEmphEnable[24]; + +/** Offset 0x0330 - PCH HSIO PCIE Gen 1 TX Output De-Emphasis Adjustment value + PCH PCIe Gen 1 TX Output De-Emphasis Adjustment Setting. +**/ + UINT8 PchPcieHsioTxGen1DeEmph[24]; + +/** Offset 0x0348 - Enable PCH HSIO PCIE Gen 2 TX Output -3.5dB De-Emphasis Adjustment Setting value override + 0: Disable; 1: Enable. +**/ + UINT8 PchPcieHsioTxGen2DeEmph3p5Enable[24]; + +/** Offset 0x0360 - PCH HSIO PCIE Gen 2 TX Output -3.5dB De-Emphasis Adjustment value + PCH PCIe Gen 2 TX Output -3.5dB De-Emphasis Adjustment Setting. +**/ + UINT8 PchPcieHsioTxGen2DeEmph3p5[24]; + +/** Offset 0x0378 - Enable PCH HSIO PCIE Gen 2 TX Output -6.0dB De-Emphasis Adjustment Setting value override + 0: Disable; 1: Enable. +**/ + UINT8 PchPcieHsioTxGen2DeEmph6p0Enable[24]; + +/** Offset 0x0390 - PCH HSIO PCIE Gen 2 TX Output -6.0dB De-Emphasis Adjustment value + PCH PCIe Gen 2 TX Output -6.0dB De-Emphasis Adjustment Setting. +**/ + UINT8 PchPcieHsioTxGen2DeEmph6p0[24]; + +/** Offset 0x03A8 - Enable PCH HSIO SATA Receiver Equalization Boost Magnitude Adjustment Value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioRxGen1EqBoostMagEnable[8]; + +/** Offset 0x03B0 - PCH HSIO SATA 1.5 Gb/s Receiver Equalization Boost Magnitude Adjustment value + PCH HSIO SATA 1.5 Gb/s Receiver Equalization Boost Magnitude Adjustment value. +**/ + UINT8 PchSataHsioRxGen1EqBoostMag[8]; + +/** Offset 0x03B8 - Enable PCH HSIO SATA Receiver Equalization Boost Magnitude Adjustment Value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioRxGen2EqBoostMagEnable[8]; + +/** Offset 0x03C0 - PCH HSIO SATA 3.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value + PCH HSIO SATA 3.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value. +**/ + UINT8 PchSataHsioRxGen2EqBoostMag[8]; + +/** Offset 0x03C8 - Enable PCH HSIO SATA Receiver Equalization Boost Magnitude Adjustment Value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioRxGen3EqBoostMagEnable[8]; + +/** Offset 0x03D0 - PCH HSIO SATA 6.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value + PCH HSIO SATA 6.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value. +**/ + UINT8 PchSataHsioRxGen3EqBoostMag[8]; + +/** Offset 0x03D8 - Enable PCH HSIO SATA 1.5 Gb/s TX Output Downscale Amplitude Adjustment value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioTxGen1DownscaleAmpEnable[8]; + +/** Offset 0x03E0 - PCH HSIO SATA 1.5 Gb/s TX Output Downscale Amplitude Adjustment value + PCH HSIO SATA 1.5 Gb/s TX Output Downscale Amplitude Adjustment value. +**/ + UINT8 PchSataHsioTxGen1DownscaleAmp[8]; + +/** Offset 0x03E8 - Enable PCH HSIO SATA 3.0 Gb/s TX Output Downscale Amplitude Adjustment value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioTxGen2DownscaleAmpEnable[8]; + +/** Offset 0x03F0 - PCH HSIO SATA 3.0 Gb/s TX Output Downscale Amplitude Adjustment value + PCH HSIO SATA 3.0 Gb/s TX Output Downscale Amplitude Adjustment value. +**/ + UINT8 PchSataHsioTxGen2DownscaleAmp[8]; + +/** Offset 0x03F8 - Enable PCH HSIO SATA 6.0 Gb/s TX Output Downscale Amplitude Adjustment value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioTxGen3DownscaleAmpEnable[8]; + +/** Offset 0x0400 - PCH HSIO SATA 6.0 Gb/s TX Output Downscale Amplitude Adjustment value + PCH HSIO SATA 6.0 Gb/s TX Output Downscale Amplitude Adjustment value. +**/ + UINT8 PchSataHsioTxGen3DownscaleAmp[8]; + +/** Offset 0x0408 - Enable PCH HSIO SATA 1.5 Gb/s TX Output De-Emphasis Adjustment Setting value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioTxGen1DeEmphEnable[8]; + +/** Offset 0x0410 - PCH HSIO SATA 1.5 Gb/s TX Output De-Emphasis Adjustment Setting + PCH HSIO SATA 1.5 Gb/s TX Output De-Emphasis Adjustment Setting. +**/ + UINT8 PchSataHsioTxGen1DeEmph[8]; + +/** Offset 0x0418 - Enable PCH HSIO SATA 3.0 Gb/s TX Output De-Emphasis Adjustment Setting value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioTxGen2DeEmphEnable[8]; + +/** Offset 0x0420 - PCH HSIO SATA 3.0 Gb/s TX Output De-Emphasis Adjustment Setting + PCH HSIO SATA 3.0 Gb/s TX Output De-Emphasis Adjustment Setting. +**/ + UINT8 PchSataHsioTxGen2DeEmph[8]; + +/** Offset 0x0428 - Enable PCH HSIO SATA 6.0 Gb/s TX Output De-Emphasis Adjustment Setting value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioTxGen3DeEmphEnable[8]; + +/** Offset 0x0430 - PCH HSIO SATA 6.0 Gb/s TX Output De-Emphasis Adjustment Setting + PCH HSIO SATA 6.0 Gb/s TX Output De-Emphasis Adjustment Setting. +**/ + UINT8 PchSataHsioTxGen3DeEmph[8]; + +/** Offset 0x0438 - PCH LPC Enhance the port 8xh decoding + Original LPC only decodes one byte of port 80h. + $EN_DIS +**/ + UINT8 PchLpcEnhancePort8xhDecoding; + +/** Offset 0x0439 - PCH Port80 Route + Control where the Port 80h cycles are sent, 0: LPC; 1: PCI. + $EN_DIS +**/ + UINT8 PchPort80Route; + +/** Offset 0x043A - Enable SMBus ARP support + Enable SMBus ARP support. + $EN_DIS +**/ + UINT8 SmbusArpEnable; + +/** Offset 0x043B - Number of RsvdSmbusAddressTable. + The number of elements in the RsvdSmbusAddressTable. +**/ + UINT8 PchNumRsvdSmbusAddresses; + +/** Offset 0x043C - SMBUS Base Address + SMBUS Base Address (IO space). +**/ + UINT16 PchSmbusIoBase; + +/** Offset 0x043E - Size of PCIe IMR. + Size of PCIe IMR in megabytes +**/ + UINT16 PcieImrSize; + +/** Offset 0x0440 - Point of RsvdSmbusAddressTable + Array of addresses reserved for non-ARP-capable SMBus devices. +**/ + UINT32 RsvdSmbusAddressTablePtr; + +/** Offset 0x0444 - Enable PCIE RP Mask + Enable/disable PCIE Root Ports. 0: disable, 1: enable. One bit for each port, bit0 + for port1, bit1 for port2, and so on. +**/ + UINT32 PcieRpEnableMask; + +/** Offset 0x0448 - Enable PCIe IMR + 0:Disable, 1:Enable + $EN_DIS +**/ + UINT8 PcieImrEnabled; + +/** Offset 0x0449 - Root port number for IMR. + Root port number for IMR. +**/ + UINT8 ImrRpSelection; + +/** Offset 0x044A - Enable SMBus Alert Pin + Enable SMBus Alert Pin. + $EN_DIS +**/ + UINT8 PchSmbAlertEnable; + +/** Offset 0x044B - Debug Interfaces + Debug Interfaces. BIT0-RAM, BIT1-UART, BIT3-USB3, BIT4-Serial IO, BIT5-TraceHub, + BIT2 - Not used. +**/ + UINT8 PcdDebugInterfaceFlags; + +/** Offset 0x044C - PcdSerialIoUartNumber + Select SerialIo Uart Controller for debug. + 0:SerialIoUart0, 1:SerialIoUart1, 2:SerialIoUart2 +**/ + UINT8 PcdSerialIoUartNumber; + +/** Offset 0x044D - ReservedPchPreMem + Reserved for Pch Pre-Mem + $EN_DIS +**/ + UINT8 ReservedPchPreMem[16]; + +/** Offset 0x045D - ISA Serial Base selection + Select ISA Serial Base address. Default is 0x3F8. + 0:0x3F8, 1:0x2F8 +**/ + UINT8 PcdIsaSerialUartBase; + +/** Offset 0x045E - GT PLL voltage offset + Core PLL voltage offset. 0: No offset. Range 0-63 +**/ + UINT8 GtPllVoltageOffset; + +/** Offset 0x045F - Ring PLL voltage offset + Core PLL voltage offset. 0: No offset. Range 0-63 +**/ + UINT8 RingPllVoltageOffset; + +/** Offset 0x0460 - System Agent PLL voltage offset + Core PLL voltage offset. 0: No offset. Range 0-63 +**/ + UINT8 SaPllVoltageOffset; + +/** Offset 0x0461 - Memory Controller PLL voltage offset + Core PLL voltage offset. 0: No offset. Range 0-63 +**/ + UINT8 McPllVoltageOffset; + +/** Offset 0x0462 - MRC Safe Config + Enables/Disable MRC Safe Config + $EN_DIS +**/ + UINT8 MrcSafeConfig; + +/** Offset 0x0463 - PcdSerialDebugBaudRate + Baud Rate for Serial Debug Messages. 3:9600, 4:19200, 6:56700, 7:115200. + 3:9600, 4:19200, 6:56700, 7:115200 +**/ + UINT8 PcdSerialDebugBaudRate; + +/** Offset 0x0464 - HobBufferSize + Size to set HOB Buffer. 0:Default, 1: 1 Byte, 2: 1 KB, 3: Max value(assuming 63KB + total HOB size). + 0:Default, 1: 1 Byte, 2: 1 KB, 3: Max value +**/ + UINT8 HobBufferSize; + +/** Offset 0x0465 - Early Command Training + Enables/Disable Early Command Training + $EN_DIS +**/ + UINT8 ECT; + +/** Offset 0x0466 - SenseAmp Offset Training + Enables/Disable SenseAmp Offset Training + $EN_DIS +**/ + UINT8 SOT; + +/** Offset 0x0467 - Early ReadMPR Timing Centering 2D + Enables/Disable Early ReadMPR Timing Centering 2D + $EN_DIS +**/ + UINT8 ERDMPRTC2D; + +/** Offset 0x0468 - Read MPR Training + Enables/Disable Read MPR Training + $EN_DIS +**/ + UINT8 RDMPRT; + +/** Offset 0x0469 - Receive Enable Training + Enables/Disable Receive Enable Training + $EN_DIS +**/ + UINT8 RCVET; + +/** Offset 0x046A - Jedec Write Leveling + Enables/Disable Jedec Write Leveling + $EN_DIS +**/ + UINT8 JWRL; + +/** Offset 0x046B - Early Write Time Centering 2D + Enables/Disable Early Write Time Centering 2D + $EN_DIS +**/ + UINT8 EWRTC2D; + +/** Offset 0x046C - Early Read Time Centering 2D + Enables/Disable Early Read Time Centering 2D + $EN_DIS +**/ + UINT8 ERDTC2D; + +/** Offset 0x046D - Write Timing Centering 1D + Enables/Disable Write Timing Centering 1D + $EN_DIS +**/ + UINT8 WRTC1D; + +/** Offset 0x046E - Write Voltage Centering 1D + Enables/Disable Write Voltage Centering 1D + $EN_DIS +**/ + UINT8 WRVC1D; + +/** Offset 0x046F - Read Timing Centering 1D + Enables/Disable Read Timing Centering 1D + $EN_DIS +**/ + UINT8 RDTC1D; + +/** Offset 0x0470 - Dimm ODT Training + Enables/Disable Dimm ODT Training + $EN_DIS +**/ + UINT8 DIMMODTT; + +/** Offset 0x0471 - DIMM RON Training + Enables/Disable DIMM RON Training + $EN_DIS +**/ + UINT8 DIMMRONT; + +/** Offset 0x0472 - Write Drive Strength/Equalization 2D + Enables/Disable Write Drive Strength/Equalization 2D + $EN_DIS +**/ + UINT8 WRDSEQT; + +/** Offset 0x0473 - Write Slew Rate Training + Enables/Disable Write Slew Rate Training + $EN_DIS +**/ + UINT8 WRSRT; + +/** Offset 0x0474 - Read ODT Training + Enables/Disable Read ODT Training + $EN_DIS +**/ + UINT8 RDODTT; + +/** Offset 0x0475 - Read Equalization Training + Enables/Disable Read Equalization Training + $EN_DIS +**/ + UINT8 RDEQT; + +/** Offset 0x0476 - Read Amplifier Training + Enables/Disable Read Amplifier Training + $EN_DIS +**/ + UINT8 RDAPT; + +/** Offset 0x0477 - Write Timing Centering 2D + Enables/Disable Write Timing Centering 2D + $EN_DIS +**/ + UINT8 WRTC2D; + +/** Offset 0x0478 - Read Timing Centering 2D + Enables/Disable Read Timing Centering 2D + $EN_DIS +**/ + UINT8 RDTC2D; + +/** Offset 0x0479 - Write Voltage Centering 2D + Enables/Disable Write Voltage Centering 2D + $EN_DIS +**/ + UINT8 WRVC2D; + +/** Offset 0x047A - Read Voltage Centering 2D + Enables/Disable Read Voltage Centering 2D + $EN_DIS +**/ + UINT8 RDVC2D; + +/** Offset 0x047B - Command Voltage Centering + Enables/Disable Command Voltage Centering + $EN_DIS +**/ + UINT8 CMDVC; + +/** Offset 0x047C - Late Command Training + Enables/Disable Late Command Training + $EN_DIS +**/ + UINT8 LCT; + +/** Offset 0x047D - Round Trip Latency Training + Enables/Disable Round Trip Latency Training + $EN_DIS +**/ + UINT8 RTL; + +/** Offset 0x047E - Turn Around Timing Training + Enables/Disable Turn Around Timing Training + $EN_DIS +**/ + UINT8 TAT; + +/** Offset 0x047F - Memory Test + Enables/Disable Memory Test + $EN_DIS +**/ + UINT8 MEMTST; + +/** Offset 0x0480 - DIMM SPD Alias Test + Enables/Disable DIMM SPD Alias Test + $EN_DIS +**/ + UINT8 ALIASCHK; + +/** Offset 0x0481 - Receive Enable Centering 1D + Enables/Disable Receive Enable Centering 1D + $EN_DIS +**/ + UINT8 RCVENC1D; + +/** Offset 0x0482 - Retrain Margin Check + Enables/Disable Retrain Margin Check + $EN_DIS +**/ + UINT8 RMC; + +/** Offset 0x0483 - Write Drive Strength Up/Dn independently + Enables/Disable Write Drive Strength Up/Dn independently + $EN_DIS +**/ + UINT8 WRDSUDT; + +/** Offset 0x0484 - ECC Support + Enables/Disable ECC Support + $EN_DIS +**/ + UINT8 EccSupport; + +/** Offset 0x0485 - Memory Remap + Enables/Disable Memory Remap + $EN_DIS +**/ + UINT8 RemapEnable; + +/** Offset 0x0486 - Rank Interleave support + Enables/Disable Rank Interleave support. NOTE: RI and HORI can not be enabled at + the same time. + $EN_DIS +**/ + UINT8 RankInterleave; + +/** Offset 0x0487 - Enhanced Interleave support + Enables/Disable Enhanced Interleave support + $EN_DIS +**/ + UINT8 EnhancedInterleave; + +/** Offset 0x0488 - Memory Trace + Enable Memory Trace of Ch 0 to Ch 1 using Stacked Mode. Both channels must be of + equal size. This option may change TOLUD and REMAP values as needed. + $EN_DIS +**/ + UINT8 MemoryTrace; + +/** Offset 0x0489 - Ch Hash Support + Enable/Disable Channel Hash Support. NOTE: ONLY if Memory interleaved Mode + $EN_DIS +**/ + UINT8 ChHashEnable; + +/** Offset 0x048A - Extern Therm Status + Enables/Disable Extern Therm Status + $EN_DIS +**/ + UINT8 EnableExtts; + +/** Offset 0x048B - Closed Loop Therm Manage + Enables/Disable Closed Loop Therm Manage + $EN_DIS +**/ + UINT8 EnableCltm; + +/** Offset 0x048C - Open Loop Therm Manage + Enables/Disable Open Loop Therm Manage + $EN_DIS +**/ + UINT8 EnableOltm; + +/** Offset 0x048D - DDR PowerDown and idle counter + Enables/Disable DDR PowerDown and idle counter + $EN_DIS +**/ + UINT8 EnablePwrDn; + +/** Offset 0x048E - DDR PowerDown and idle counter - LPDDR + Enables/Disable DDR PowerDown and idle counter(For LPDDR Only) + $EN_DIS +**/ + UINT8 EnablePwrDnLpddr; + +/** Offset 0x048F - Use user provided power weights, scale factor, and channel power floor values + Enables/Disable Use user provided power weights, scale factor, and channel power + floor values + $EN_DIS +**/ + UINT8 UserPowerWeightsEn; + +/** Offset 0x0490 - RAPL PL Lock + Enables/Disable RAPL PL Lock + $EN_DIS +**/ + UINT8 RaplLim2Lock; + +/** Offset 0x0491 - RAPL PL 2 enable + Enables/Disable RAPL PL 2 enable + $EN_DIS +**/ + UINT8 RaplLim2Ena; + +/** Offset 0x0492 - RAPL PL 1 enable + Enables/Disable RAPL PL 1 enable + $EN_DIS +**/ + UINT8 RaplLim1Ena; + +/** Offset 0x0493 - SelfRefresh Enable + Enables/Disable SelfRefresh Enable + $EN_DIS +**/ + UINT8 SrefCfgEna; + +/** Offset 0x0494 - Throttler CKEMin Defeature - LPDDR + Enables/Disable Throttler CKEMin Defeature(For LPDDR Only) + $EN_DIS +**/ + UINT8 ThrtCkeMinDefeatLpddr; + +/** Offset 0x0495 - Throttler CKEMin Defeature + Enables/Disable Throttler CKEMin Defeature + $EN_DIS +**/ + UINT8 ThrtCkeMinDefeat; + +/** Offset 0x0496 - Enable RH Prevention + Enables/Disable RH Prevention + $EN_DIS +**/ + UINT8 RhPrevention; + +/** Offset 0x0497 - Exit On Failure (MRC) + Enables/Disable Exit On Failure (MRC) + $EN_DIS +**/ + UINT8 ExitOnFailure; + +/** Offset 0x0498 - LPDDR Thermal Sensor + Enables/Disable LPDDR Thermal Sensor + $EN_DIS +**/ + UINT8 DdrThermalSensor; + +/** Offset 0x0499 - Select if CLK0 is shared between Rank0 and Rank1 in DDR4 DDP + Select if CLK0 is shared between Rank0 and Rank1 in DDR4 DDP + $EN_DIS +**/ + UINT8 Ddr4DdpSharedClock; + +/** Offset 0x049A - Select if ZQ pin is shared between Rank0 and Rank1 in DDR4 DDP + ESelect if ZQ pin is shared between Rank0 and Rank1 in DDR4 DDP + $EN_DIS +**/ + UINT8 Ddr4DdpSharedZq; + +/** Offset 0x049B +**/ + UINT8 UnusedUpdSpace7; + +/** Offset 0x049C - Ch Hash Mask + Set the BIT(s) to be included in the XOR function. NOTE BIT mask corresponds to + BITS [19:6 +**/ + UINT16 ChHashMask; + +/** Offset 0x049E +**/ + UINT8 UnusedUpdSpace8[2]; + +/** Offset 0x04A0 - Base reference clock value + Base reference clock value, in Hertz(Default is 125Hz) + 100000000:100Hz, 125000000:125Hz, 167000000:167Hz, 250000000:250Hz +**/ + UINT32 BClkFrequency; + +/** Offset 0x04A4 - Ch Hash Interleaved Bit + Select the BIT to be used for Channel Interleaved mode. NOTE: BIT7 will interlave + the channels at a 2 cacheline granularity, BIT8 at 4 and BIT9 at 8. Default is BIT8 + 0:BIT6, 1:BIT7, 2:BIT8, 3:BIT9, 4:BIT10, 5:BIT11, 6:BIT12, 7:BIT13 +**/ + UINT8 ChHashInterleaveBit; + +/** Offset 0x04A5 - Energy Scale Factor + Energy Scale Factor, Default is 4 +**/ + UINT8 EnergyScaleFact; + +/** Offset 0x04A6 - EPG DIMM Idd3N + Active standby current (Idd3N) in milliamps from datasheet. Must be calculated on + a per DIMM basis. Default is 26 +**/ + UINT16 Idd3n; + +/** Offset 0x04A8 - EPG DIMM Idd3P + Active power-down current (Idd3P) in milliamps from datasheet. Must be calculated + on a per DIMM basis. Default is 11 +**/ + UINT16 Idd3p; + +/** Offset 0x04AA - CMD Slew Rate Training + Enable/Disable CMD Slew Rate Training + $EN_DIS +**/ + UINT8 CMDSR; + +/** Offset 0x04AB - CMD Drive Strength and Tx Equalization + Enable/Disable CMD Drive Strength and Tx Equalization + $EN_DIS +**/ + UINT8 CMDDSEQ; + +/** Offset 0x04AC - CMD Normalization + Enable/Disable CMD Normalization + $EN_DIS +**/ + UINT8 CMDNORM; + +/** Offset 0x04AD - Early DQ Write Drive Strength and Equalization Training + Enable/Disable Early DQ Write Drive Strength and Equalization Training + $EN_DIS +**/ + UINT8 EWRDSEQ; + +/** Offset 0x04AE - RH Activation Probability + RH Activation Probability, Probability value is 1/2^(inputvalue) +**/ + UINT8 RhActProbability; + +/** Offset 0x04AF - RAPL PL 2 WindowX + Power PL 2 time window X value, (1/1024)*(1+(x/4))*(2^y) (1=Def) +**/ + UINT8 RaplLim2WindX; + +/** Offset 0x04B0 - RAPL PL 2 WindowY + Power PL 2 time window Y value, (1/1024)*(1+(x/4))*(2^y) (1=Def) +**/ + UINT8 RaplLim2WindY; + +/** Offset 0x04B1 - RAPL PL 1 WindowX + Power PL 1 time window X value, (1/1024)*(1+(x/4))*(2^y) (0=Def) +**/ + UINT8 RaplLim1WindX; + +/** Offset 0x04B2 - RAPL PL 1 WindowY + Power PL 1 time window Y value, (1/1024)*(1+(x/4))*(2^y) (0=Def) +**/ + UINT8 RaplLim1WindY; + +/** Offset 0x04B3 +**/ + UINT8 UnusedUpdSpace9; + +/** Offset 0x04B4 - RAPL PL 2 Power + range[0;2^14-1]= [2047.875;0]in W, (222= Def) +**/ + UINT16 RaplLim2Pwr; + +/** Offset 0x04B6 - RAPL PL 1 Power + range[0;2^14-1]= [2047.875;0]in W, (0= Def) +**/ + UINT16 RaplLim1Pwr; + +/** Offset 0x04B8 - Warm Threshold Ch0 Dimm0 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Default is 255 +**/ + UINT8 WarmThresholdCh0Dimm0; + +/** Offset 0x04B9 - Warm Threshold Ch0 Dimm1 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Default is 255 +**/ + UINT8 WarmThresholdCh0Dimm1; + +/** Offset 0x04BA - Warm Threshold Ch1 Dimm0 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Default is 255 +**/ + UINT8 WarmThresholdCh1Dimm0; + +/** Offset 0x04BB - Warm Threshold Ch1 Dimm1 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Default is 255 +**/ + UINT8 WarmThresholdCh1Dimm1; + +/** Offset 0x04BC - Hot Threshold Ch0 Dimm0 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Default is 255 +**/ + UINT8 HotThresholdCh0Dimm0; + +/** Offset 0x04BD - Hot Threshold Ch0 Dimm1 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Default is 255 +**/ + UINT8 HotThresholdCh0Dimm1; + +/** Offset 0x04BE - Hot Threshold Ch1 Dimm0 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Default is 255 +**/ + UINT8 HotThresholdCh1Dimm0; + +/** Offset 0x04BF - Hot Threshold Ch1 Dimm1 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Default is 255 +**/ + UINT8 HotThresholdCh1Dimm1; + +/** Offset 0x04C0 - Warm Budget Ch0 Dimm0 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM +**/ + UINT8 WarmBudgetCh0Dimm0; + +/** Offset 0x04C1 - Warm Budget Ch0 Dimm1 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM +**/ + UINT8 WarmBudgetCh0Dimm1; + +/** Offset 0x04C2 - Warm Budget Ch1 Dimm0 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM +**/ + UINT8 WarmBudgetCh1Dimm0; + +/** Offset 0x04C3 - Warm Budget Ch1 Dimm1 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM +**/ + UINT8 WarmBudgetCh1Dimm1; + +/** Offset 0x04C4 - Hot Budget Ch0 Dimm0 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM +**/ + UINT8 HotBudgetCh0Dimm0; + +/** Offset 0x04C5 - Hot Budget Ch0 Dimm1 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM +**/ + UINT8 HotBudgetCh0Dimm1; + +/** Offset 0x04C6 - Hot Budget Ch1 Dimm0 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM +**/ + UINT8 HotBudgetCh1Dimm0; + +/** Offset 0x04C7 - Hot Budget Ch1 Dimm1 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM +**/ + UINT8 HotBudgetCh1Dimm1; + +/** Offset 0x04C8 - Idle Energy Ch0Dimm0 + Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) +**/ + UINT8 IdleEnergyCh0Dimm0; + +/** Offset 0x04C9 - Idle Energy Ch0Dimm1 + Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) +**/ + UINT8 IdleEnergyCh0Dimm1; + +/** Offset 0x04CA - Idle Energy Ch1Dimm0 + Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) +**/ + UINT8 IdleEnergyCh1Dimm0; + +/** Offset 0x04CB - Idle Energy Ch1Dimm1 + Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) +**/ + UINT8 IdleEnergyCh1Dimm1; + +/** Offset 0x04CC - PowerDown Energy Ch0Dimm0 + PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(5= Def) +**/ + UINT8 PdEnergyCh0Dimm0; + +/** Offset 0x04CD - PowerDown Energy Ch0Dimm1 + PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(5= Def) +**/ + UINT8 PdEnergyCh0Dimm1; + +/** Offset 0x04CE - PowerDown Energy Ch1Dimm0 + PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(5= Def) +**/ + UINT8 PdEnergyCh1Dimm0; + +/** Offset 0x04CF - PowerDown Energy Ch1Dimm1 + PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(5= Def) +**/ + UINT8 PdEnergyCh1Dimm1; + +/** Offset 0x04D0 - Activate Energy Ch0Dimm0 + Activate Energy Contribution, range[255;0],(172= Def) +**/ + UINT8 ActEnergyCh0Dimm0; + +/** Offset 0x04D1 - Activate Energy Ch0Dimm1 + Activate Energy Contribution, range[255;0],(172= Def) +**/ + UINT8 ActEnergyCh0Dimm1; + +/** Offset 0x04D2 - Activate Energy Ch1Dimm0 + Activate Energy Contribution, range[255;0],(172= Def) +**/ + UINT8 ActEnergyCh1Dimm0; + +/** Offset 0x04D3 - Activate Energy Ch1Dimm1 + Activate Energy Contribution, range[255;0],(172= Def) +**/ + UINT8 ActEnergyCh1Dimm1; + +/** Offset 0x04D4 - Read Energy Ch0Dimm0 + Read Energy Contribution, range[255;0],(212= Def) +**/ + UINT8 RdEnergyCh0Dimm0; + +/** Offset 0x04D5 - Read Energy Ch0Dimm1 + Read Energy Contribution, range[255;0],(212= Def) +**/ + UINT8 RdEnergyCh0Dimm1; + +/** Offset 0x04D6 - Read Energy Ch1Dimm0 + Read Energy Contribution, range[255;0],(212= Def) +**/ + UINT8 RdEnergyCh1Dimm0; + +/** Offset 0x04D7 - Read Energy Ch1Dimm1 + Read Energy Contribution, range[255;0],(212= Def) +**/ + UINT8 RdEnergyCh1Dimm1; + +/** Offset 0x04D8 - Write Energy Ch0Dimm0 + Write Energy Contribution, range[255;0],(221= Def) +**/ + UINT8 WrEnergyCh0Dimm0; + +/** Offset 0x04D9 - Write Energy Ch0Dimm1 + Write Energy Contribution, range[255;0],(221= Def) +**/ + UINT8 WrEnergyCh0Dimm1; + +/** Offset 0x04DA - Write Energy Ch1Dimm0 + Write Energy Contribution, range[255;0],(221= Def) +**/ + UINT8 WrEnergyCh1Dimm0; + +/** Offset 0x04DB - Write Energy Ch1Dimm1 + Write Energy Contribution, range[255;0],(221= Def) +**/ + UINT8 WrEnergyCh1Dimm1; + +/** Offset 0x04DC - Throttler CKEMin Timer + Timer value for CKEMin, range[255;0]. Req'd min of SC_ROUND_T + BYTE_LENGTH (4). + Default is 0x30 +**/ + UINT8 ThrtCkeMinTmr; + +/** Offset 0x04DD - Cke Rank Mapping + Bits [7:4] - Channel 1, bits [3:0] - Channel 0. 0xAA=Default Bit [i] specifies + which rank CKE[i] goes to. +**/ + UINT8 CkeRankMapping; + +/** Offset 0x04DE - Rapl Power Floor Ch0 + Power budget ,range[255;0],(0= 5.3W Def) +**/ + UINT8 RaplPwrFlCh0; + +/** Offset 0x04DF - Rapl Power Floor Ch1 + Power budget ,range[255;0],(0= 5.3W Def) +**/ + UINT8 RaplPwrFlCh1; + +/** Offset 0x04E0 - Command Rate Support + CMD Rate and Limit Support Option. NOTE: ONLY supported in 1N Mode, Default is 3 CMDs + 0:Disable, 1:1 CMD, 2:2 CMDS, 3:3 CMDS, 4:4 CMDS, 5:5 CMDS, 6:6 CMDS, 7:7 CMDS +**/ + UINT8 EnCmdRate; + +/** Offset 0x04E1 - REFRESH_2X_MODE + 0- (Default)Disabled 1-iMC enables 2xRef when Warm and Hot 2- iMC enables 2xRef when Hot + 0:Disable, 1:Enabled for WARM or HOT, 2:Enabled HOT only +**/ + UINT8 Refresh2X; + +/** Offset 0x04E2 - Energy Performance Gain + Enable/disable(default) Energy Performance Gain. + $EN_DIS +**/ + UINT8 EpgEnable; + +/** Offset 0x04E3 - Row Hammer Solution + Type of method used to prevent Row Hammer. Default is Hardware RHP + 0:Hardware RHP, 1:2x Refresh +**/ + UINT8 RhSolution; + +/** Offset 0x04E4 - User Manual Threshold + Disabled: Predefined threshold will be used.\n + Enabled: User Input will be used. + $EN_DIS +**/ + UINT8 UserThresholdEnable; + +/** Offset 0x04E5 - User Manual Budget + Disabled: Configuration of memories will defined the Budget value.\n + Enabled: User Input will be used. + $EN_DIS +**/ + UINT8 UserBudgetEnable; + +/** Offset 0x04E6 - TcritMax + Maximum Critical Temperature in Centigrade of the On-DIMM Thermal Sensor. TCRITMax + has to be greater than THIGHMax .\n + Critical temperature will be TcritMax +**/ + UINT8 TsodTcritMax; + +/** Offset 0x04E7 - Event mode + Disable:Comparator mode.\n + Enable:Interrupt mode + $EN_DIS +**/ + UINT8 TsodEventMode; + +/** Offset 0x04E8 - EVENT polarity + Disable:Active LOW.\n + Enable:Active HIGH + $EN_DIS +**/ + UINT8 TsodEventPolarity; + +/** Offset 0x04E9 - Critical event only + Disable:Trips on alarm or critical.\n + Enable:Trips only if criticaal temperature is reached + $EN_DIS +**/ + UINT8 TsodCriticalEventOnly; + +/** Offset 0x04EA - Event output control + Disable:Event output disable.\n + Enable:Event output enabled + $EN_DIS +**/ + UINT8 TsodEventOutputControl; + +/** Offset 0x04EB - Alarm window lock bit + Disable:Alarm trips are not locked and can be changed.\n + Enable:Alarm trips are locked and cannot be changed + $EN_DIS +**/ + UINT8 TsodAlarmwindowLockBit; + +/** Offset 0x04EC - Critical trip lock bit + Disable:Critical trip is not locked and can be changed.\n + Enable:Critical trip is locked and cannot be changed + $EN_DIS +**/ + UINT8 TsodCriticaltripLockBit; + +/** Offset 0x04ED - Shutdown mode + Disable:Temperature sensor enable.\n + Enable:Temperature sensor disable + $EN_DIS +**/ + UINT8 TsodShutdownMode; + +/** Offset 0x04EE - ThighMax + Thigh = ThighMax (Default is 93) +**/ + UINT8 TsodThigMax; + +/** Offset 0x04EF - User Manual Thig and Tcrit + Disabled(Default): Temperature will be given by the configuration of memories and + 1x or 2xrefresh rate.\n + Enabled: User Input will define for Thigh and Tcrit. + $EN_DIS +**/ + UINT8 TsodManualEnable; + +/** Offset 0x04F0 - Force OLTM or 2X Refresh when needed + Disabled(Default): = Force OLTM.\n + Enabled: = Force 2x Refresh. + $EN_DIS +**/ + UINT8 ForceOltmOrRefresh2x; + +/** Offset 0x04F1 - Pwr Down Idle Timer + The minimum value should = to the worst case Roundtrip delay + Burst_Length. 0 means + AUTO: 64 for ULX/ULT, 128 for DT/Halo +**/ + UINT8 PwdwnIdleCounter; + +/** Offset 0x04F2 - Bitmask of ranks that have CA bus terminated + Offset 225 LPDDR4: Bitmask of ranks that have CA bus terminated. 0x01=Default, + Rank0 is terminating and Rank1 is non-terminating +**/ + UINT8 CmdRanksTerminated; + +/** Offset 0x04F3 - GDXC MOT enable + GDXC MOT enable. + $EN_DIS +**/ + UINT8 GdxcEnable; + +/** Offset 0x04F4 - PcdSerialDebugLevel + Serial Debug Message Level. 0:Disable, 1:Error Only, 2:Error & Warnings, 3:Load, + Error, Warnings & Info, 4:Load, Error, Warnings, Info & Event, 5:Load, Error, Warnings, + Info & Verbose. + 0:Disable, 1:Error Only, 2:Error and Warnings, 3:Load Error Warnings and Info, 4:Load + Error Warnings and Info, 5:Load Error Warnings Info and Verbose +**/ + UINT8 PcdSerialDebugLevel; + +/** Offset 0x04F5 - Fivr Faults + Fivr Faults; 0: Disabled; 1: Enabled. + $EN_DIS +**/ + UINT8 FivrFaults; + +/** Offset 0x04F6 - Fivr Efficiency + Fivr Efficiency Management; 0: Disabled; 1: Enabled. + $EN_DIS +**/ + UINT8 FivrEfficiency; + +/** Offset 0x04F7 - Safe Mode Support + This option configures the varous items in the IO and MC to be more conservative.(def=Disable) + $EN_DIS +**/ + UINT8 SafeMode; + +/** Offset 0x04F8 - Ask MRC to clear memory content + Ask MRC to clear memory content 0: Do not Clear Memory; 1: Clear Memory. + $EN_DIS +**/ + UINT8 CleanMemory; + +/** Offset 0x04F9 - LpDdrDqDqsReTraining + Enables/Disable LpDdrDqDqsReTraining + $EN_DIS +**/ + UINT8 LpDdrDqDqsReTraining; + +/** Offset 0x04FA - Post Code Output Port + This option configures Post Code Output Port +**/ + UINT16 PostCodeOutputPort; + +/** Offset 0x04FC - RMTLoopCount + Specifies the Loop Count to be used during Rank Margin Tool Testing. 0 - AUTO +**/ + UINT8 RMTLoopCount; + +/** Offset 0x04FD - BER Support + Enable/Disable the Rank Margin Tool interpolation/extrapolation. + 0:Disable, 1:Enable +**/ + UINT8 EnBER; + +/** Offset 0x04FE - Dual Dimm Per-Channel Board Type + Option to indicate if Board Layout includes One/Two DIMMs per channel. This is used + to limit maximum frequency for some SKUs. + 0:1DPC, 1:2DPC +**/ + UINT8 DualDimmPerChannelBoardType; + +/** Offset 0x04FF - DDR4 Mixed U-DIMM 2DPC Limitation + Enable/Disable 2667 Frequency Limitation for DDR4 U-DIMM Mixed Dimm 2DPC population. + Disable=0, Enable(Default)=1 + $EN_DIS +**/ + UINT8 Ddr4MixedUDimm2DpcLimit; + +/** Offset 0x0500 - CFL Reserved + Reserved FspmConfig CFL + $EN_DIS +**/ + UINT8 ReservedFspmUpdCfl[2]; + +/** Offset 0x0502 - Memory Test on Warm Boot + Run Base Memory Test on Warm Boot + 0:Disable, 1:Enable +**/ + UINT8 MemTestOnWarmBoot; + +/** Offset 0x0503 - Throttler CKEMin Timer - LPDDR + Timer value for CKEMin (For LPDDR Only), range[255;0]. Req'd min of SC_ROUND_T + + BYTE_LENGTH (4). Default is 0x40 +**/ + UINT8 ThrtCkeMinTmrLpddr; + +/** Offset 0x0504 - State of X2APIC_OPT_OUT bit in the DMAR table + 0=Disable/Clear, 1=Enable/Set + $EN_DIS +**/ + UINT8 X2ApicOptOut; + +/** Offset 0x0505 +**/ + UINT8 UnusedUpdSpace10[2]; + +/** Offset 0x0507 +**/ + UINT8 ReservedFspmUpd[9]; +} FSP_M_CONFIG; + +/** Fsp M Test Configuration +**/ +typedef struct { + +/** Offset 0x0510 +**/ + UINT32 Signature; + +/** Offset 0x0514 - Skip external display device scanning + Enable: Do not scan for external display device, Disable (Default): Scan external + display devices + $EN_DIS +**/ + UINT8 SkipExtGfxScan; + +/** Offset 0x0515 - Generate BIOS Data ACPI Table + Enable: Generate BDAT for MRC RMT or SA PCIe data. Disable (Default): Do not generate it + $EN_DIS +**/ + UINT8 BdatEnable; + +/** Offset 0x0516 - Detect External Graphics device for LegacyOpROM + Detect and report if external graphics device only support LegacyOpROM or not (to + support CSM auto-enable). Enable(Default)=1, Disable=0 + $EN_DIS +**/ + UINT8 ScanExtGfxForLegacyOpRom; + +/** Offset 0x0517 - Lock PCU Thermal Management registers + Lock PCU Thermal Management registers. Enable(Default)=1, Disable=0 + $EN_DIS +**/ + UINT8 LockPTMregs; + +/** Offset 0x0518 - DMI Max Link Speed + Auto (Default)(0x0): Maximum possible link speed, Gen1(0x1): Limit Link to Gen1 + Speed, Gen2(0x2): Limit Link to Gen2 Speed, Gen3(0x3):Limit Link to Gen3 Speed + 0:Auto, 1:Gen1, 2:Gen2, 3:Gen3 +**/ + UINT8 DmiMaxLinkSpeed; + +/** Offset 0x0519 - DMI Equalization Phase 2 + DMI Equalization Phase 2. (0x0): Disable phase 2, (0x1): Enable phase 2, (0x2)(Default): + AUTO - Use the current default method + 0:Disable phase2, 1:Enable phase2, 2:Auto +**/ + UINT8 DmiGen3EqPh2Enable; + +/** Offset 0x051A - DMI Gen3 Equalization Phase3 + DMI Gen3 Equalization Phase3. Auto(0x0)(Default): Use the current default method, + HwEq(0x1): Use Adaptive Hardware Equalization, SwEq(0x2): Use Adaptive Software + Equalization (Implemented in BIOS Reference Code), Static(0x3): Use the Static + EQs provided in DmiGen3EndPointPreset array for Phase1 AND Phase3 (Instead of just + Phase1), Disabled(0x4): Bypass Equalization Phase 3 + 0:Auto, 1:HwEq, 2:SwEq, 3:StaticEq, 4:BypassPhase3 +**/ + UINT8 DmiGen3EqPh3Method; + +/** Offset 0x051B - Phase2 EQ enable on the PEG 0:1:0. + Phase2 EQ enable on the PEG 0:1:0. Disabled(0x0): Disable phase 2, Enabled(0x1): + Enable phase 2, Auto(0x2)(Default): Use the current default method + 0:Disable, 1:Enable, 2:Auto +**/ + UINT8 Peg0Gen3EqPh2Enable; + +/** Offset 0x051C - Phase2 EQ enable on the PEG 0:1:1. + Phase2 EQ enable on the PEG 0:1:0. Disabled(0x0): Disable phase 2, Enabled(0x1): + Enable phase 2, Auto(0x2)(Default): Use the current default method + 0:Disable, 1:Enable, 2:Auto +**/ + UINT8 Peg1Gen3EqPh2Enable; + +/** Offset 0x051D - Phase2 EQ enable on the PEG 0:1:2. + Phase2 EQ enable on the PEG 0:1:0. Disabled(0x0): Disable phase 2, Enabled(0x1): + Enable phase 2, Auto(0x2)(Default): Use the current default method + 0:Disable, 1:Enable, 2:Auto +**/ + UINT8 Peg2Gen3EqPh2Enable; + +/** Offset 0x051E - Phase2 EQ enable on the PEG 0:1:3. + Phase2 EQ enable on the PEG 0:1:0. Disabled(0x0): Disable phase 2, Enabled(0x1): + Enable phase 2, Auto(0x2)(Default): Use the current default method + 0:Disable, 1:Enable, 2:Auto +**/ + UINT8 Peg3Gen3EqPh2Enable; + +/** Offset 0x051F - Phase3 EQ method on the PEG 0:1:0. + PEG Gen3 Equalization Phase3. Auto(0x0)(Default): Use the current default method, + HwEq(0x1): Use Adaptive Hardware Equalization, SwEq(0x2): Use Adaptive Software + Equalization (Implemented in BIOS Reference Code), Static(0x3): Use the Static + EQs provided in DmiGen3EndPointPreset array for Phase1 AND Phase3 (Instead of just + Phase1), Disabled(0x4): Bypass Equalization Phase 3 + 0:Auto, 1:HwEq, 2:SwEq, 3:StaticEq, 4:BypassPhase3 +**/ + UINT8 Peg0Gen3EqPh3Method; + +/** Offset 0x0520 - Phase3 EQ method on the PEG 0:1:1. + PEG Gen3 Equalization Phase3. Auto(0x0)(Default): Use the current default method, + HwEq(0x1): Use Adaptive Hardware Equalization, SwEq(0x2): Use Adaptive Software + Equalization (Implemented in BIOS Reference Code), Static(0x3): Use the Static + EQs provided in DmiGen3EndPointPreset array for Phase1 AND Phase3 (Instead of just + Phase1), Disabled(0x4): Bypass Equalization Phase 3 + 0:Auto, 1:HwEq, 2:SwEq, 3:StaticEq, 4:BypassPhase3 +**/ + UINT8 Peg1Gen3EqPh3Method; + +/** Offset 0x0521 - Phase3 EQ method on the PEG 0:1:2. + PEG Gen3 Equalization Phase3. Auto(0x0)(Default): Use the current default method, + HwEq(0x1): Use Adaptive Hardware Equalization, SwEq(0x2): Use Adaptive Software + Equalization (Implemented in BIOS Reference Code), Static(0x3): Use the Static + EQs provided in DmiGen3EndPointPreset array for Phase1 AND Phase3 (Instead of just + Phase1), Disabled(0x4): Bypass Equalization Phase 3 + 0:Auto, 1:HwEq, 2:SwEq, 3:StaticEq, 4:BypassPhase3 +**/ + UINT8 Peg2Gen3EqPh3Method; + +/** Offset 0x0522 - Phase3 EQ method on the PEG 0:1:3. + PEG Gen3 Equalization Phase3. Auto(0x0)(Default): Use the current default method, + HwEq(0x1): Use Adaptive Hardware Equalization, SwEq(0x2): Use Adaptive Software + Equalization (Implemented in BIOS Reference Code), Static(0x3): Use the Static + EQs provided in DmiGen3EndPointPreset array for Phase1 AND Phase3 (Instead of just + Phase1), Disabled(0x4): Bypass Equalization Phase 3 + 0:Auto, 1:HwEq, 2:SwEq, 3:StaticEq, 4:BypassPhase3 +**/ + UINT8 Peg3Gen3EqPh3Method; + +/** Offset 0x0523 - Enable/Disable PEG GEN3 Static EQ Phase1 programming + Program PEG Gen3 EQ Phase1 Static Presets. Disabled(0x0): Disable EQ Phase1 Static + Presets Programming, Enabled(0x1)(Default): Enable EQ Phase1 Static Presets Programming + $EN_DIS +**/ + UINT8 PegGen3ProgramStaticEq; + +/** Offset 0x0524 - PEG Gen3 SwEq Always Attempt + Gen3 Software Equalization will be executed every boot. Disabled(0x0)(Default): + Reuse EQ settings saved/restored from NVRAM whenever possible, Enabled(0x1): Re-test + and generate new EQ values every boot, not recommended + 0:Disable, 1:Enable +**/ + UINT8 Gen3SwEqAlwaysAttempt; + +/** Offset 0x0525 - Select number of TxEq presets to test in the PCIe/DMI SwEq + Select number of TxEq presets to test in the PCIe/DMI SwEq. P7,P3,P5(0x0): Test + Presets 7, 3, and 5, P0-P9(0x1): Test Presets 0-9, Auto(0x2)(Default): Use the + current default method (Default)Auto will test Presets 7, 3, and 5. It is possible + for this default to change over time;using Auto will ensure Reference Code always + uses the latest default settings + 0:P7 P3 P5, 1:P0 to P9, 2:Auto +**/ + UINT8 Gen3SwEqNumberOfPresets; + +/** Offset 0x0526 - Enable use of the Voltage Offset and Centering Test in the PCIe SwEq + Enable use of the Voltage Offset and Centering Test in the PCIe Software Equalization + Algorithm. Disabled(0x0): Disable VOC Test, Enabled(0x1): Enable VOC Test, Auto(0x2)(Default): + Use the current default + 0:Disable, 1:Enable, 2:Auto +**/ + UINT8 Gen3SwEqEnableVocTest; + +/** Offset 0x0527 - PCIe Rx Compliance Testing Mode + Disabled(0x0)(Default): Normal Operation - Disable PCIe Rx Compliance testing, Enabled(0x1): + PCIe Rx Compliance Test Mode - PEG controller is in Rx Compliance Testing Mode; + it should only be set when doing PCIe compliance testing + $EN_DIS +**/ + UINT8 PegRxCemTestingMode; + +/** Offset 0x0528 - PCIe Rx Compliance Loopback Lane When PegRxCemTestingMode is Enabled + the specificied Lane (0 - 15) will be used for RxCEMLoopback. Default is Lane 0 +**/ + UINT8 PegRxCemLoopbackLane; + +/** Offset 0x0529 - Generate PCIe BDAT Margin Table + Set this policy to enable the generation and addition of PCIe margin data to the + BDAT table. Disabled(0x0)(Default): Normal Operation - Disable PCIe BDAT margin + data generation, Enable(0x1): Generate PCIe BDAT margin data + $EN_DIS +**/ + UINT8 PegGenerateBdatMarginTable; + +/** Offset 0x052A - PCIe Non-Protocol Awareness for Rx Compliance Testing + Set this policy to enable the generation and addition of PCIe margin data to the + BDAT table. Disabled(0x0)(Default): Normal Operation - Disable non-protocol awareness, + Enable(0x1): Non-Protocol Awareness Enabled - Enable non-protocol awareness for + compliance testing + $EN_DIS +**/ + UINT8 PegRxCemNonProtocolAwareness; + +/** Offset 0x052B - PCIe Override RxCTLE + Disable(0x0)(Default): Normal Operation - RxCTLE adaptive behavior enabled, Enable(0x1): + Override RxCTLE - Disable RxCTLE adaptive behavior to keep the configured RxCTLE + peak values unmodified + $EN_DIS +**/ + UINT8 PegGen3RxCtleOverride; + +/** Offset 0x052C - Rsvd + Disable(0x0)(Default): Normal Operation - RxCTLE adaptive behavior enabled, Enable(0x1): + Override RxCTLE - Disable RxCTLE adaptive behavior to keep the configured RxCTLE + peak values unmodified + $EN_DIS +**/ + UINT8 PegGen3Rsvd; + +/** Offset 0x052D - PEG Gen3 Root port preset values per lane + Used for programming PEG Gen3 preset values per lane. Range: 0-9, 8 is default for each lane +**/ + UINT8 PegGen3RootPortPreset[20]; + +/** Offset 0x0541 - PEG Gen3 End port preset values per lane + Used for programming PEG Gen3 preset values per lane. Range: 0-9, 7 is default for each lane +**/ + UINT8 PegGen3EndPointPreset[20]; + +/** Offset 0x0555 - PEG Gen3 End port Hint values per lane + Used for programming PEG Gen3 Hint values per lane. Range: 0-6, 2 is default for each lane +**/ + UINT8 PegGen3EndPointHint[20]; + +/** Offset 0x0569 +**/ + UINT8 UnusedUpdSpace11; + +/** Offset 0x056A - Jitter Dwell Time for PCIe Gen3 Software Equalization + Range: 0-65535, default is 1000. @warning Do not change from the default +**/ + UINT16 Gen3SwEqJitterDwellTime; + +/** Offset 0x056C - Jitter Error Target for PCIe Gen3 Software Equalization + Range: 0-65535, default is 1. @warning Do not change from the default +**/ + UINT16 Gen3SwEqJitterErrorTarget; + +/** Offset 0x056E - VOC Dwell Time for PCIe Gen3 Software Equalization + Range: 0-65535, default is 10000. @warning Do not change from the default +**/ + UINT16 Gen3SwEqVocDwellTime; + +/** Offset 0x0570 - VOC Error Target for PCIe Gen3 Software Equalization + Range: 0-65535, default is 2. @warning Do not change from the default +**/ + UINT16 Gen3SwEqVocErrorTarget; + +/** Offset 0x0572 - Panel Power Enable + Control for enabling/disabling VDD force bit (Required only for early enabling of + eDP panel). 0=Disable, 1(Default)=Enable + $EN_DIS +**/ + UINT8 PanelPowerEnable; + +/** Offset 0x0573 - BdatTestType + Indicates the type of Memory Training data to populate into the BDAT ACPI table. + 0:Rank Margin Tool, 1:Margin2D +**/ + UINT8 BdatTestType; + +/** Offset 0x0574 - Disable VT-d + 0=Enable/FALSE(VT-d enabled), 1=Disable/TRUE (VT-d disabled) + $EN_DIS +**/ + UINT8 VtdDisable; + +/** Offset 0x0575 +**/ + UINT8 UnusedUpdSpace12; + +/** Offset 0x0576 - Delta T12 Power Cycle Delay required in ms + Select the value for delay required. 0(Default)= No delay, 0xFFFF = Auto calculate + T12 Delay to max 500ms + 0 : No Delay, 0xFFFF : Auto Calulate T12 Delay +**/ + UINT16 DeltaT12PowerCycleDelayPreMem; + +/** Offset 0x0578 - SaPreMemTestRsvd + Reserved for SA Pre-Mem Test + $EN_DIS +**/ + UINT8 SaPreMemTestRsvd[9]; + +/** Offset 0x0581 +**/ + UINT8 UnusedUpdSpace13; + +/** Offset 0x0582 - TotalFlashSize + Enable/Disable. 0: Disable, define default value of TotalFlashSize , 1: enable +**/ + UINT16 TotalFlashSize; + +/** Offset 0x0584 - BiosSize + Enable/Disable. 0: Disable, define default value of BiosSize , 1: enable +**/ + UINT16 BiosSize; + +/** Offset 0x0586 - TxtAcheckRequest + Enable/Disable. When Enabled, it will forcing calling TXT Acheck once. + $EN_DIS +**/ + UINT8 TxtAcheckRequest; + +/** Offset 0x0587 - SecurityTestRsvd + Reserved for SA Pre-Mem Test + $EN_DIS +**/ + UINT8 SecurityTestRsvd[3]; + +/** Offset 0x058A - Smbus dynamic power gating + Disable or Enable Smbus dynamic power gating. + $EN_DIS +**/ + UINT8 SmbusDynamicPowerGating; + +/** Offset 0x058B - Disable and Lock Watch Dog Register + Set 1 to clear WDT status, then disable and lock WDT registers. + $EN_DIS +**/ + UINT8 WdtDisableAndLock; + +/** Offset 0x058C - SMBUS SPD Write Disable + Set/Clear Smbus SPD Write Disable. 0: leave SPD Write Disable bit; 1: set SPD Write + Disable bit. For security recommendations, SPD write disable bit must be set. + $EN_DIS +**/ + UINT8 SmbusSpdWriteDisable; + +/** Offset 0x058D - ReservedPchPreMemTest + Reserved for Pch Pre-Mem Test + $EN_DIS +**/ + UINT8 ReservedPchPreMemTest[16]; + +/** Offset 0x059D - Force ME DID Init Status + Test, 0: disable, 1: Success, 2: No Memory in Channels, 3: Memory Init Error, Set + ME DID init stat value + $EN_DIS +**/ + UINT8 DidInitStat; + +/** Offset 0x059E - CPU Replaced Polling Disable + Test, 0: disable, 1: enable, Setting this option disables CPU replacement polling loop + $EN_DIS +**/ + UINT8 DisableCpuReplacedPolling; + +/** Offset 0x059F - ME DID Message + Test, 0: disable, 1: enable, Enable/Disable ME DID Message (disable will prevent + the DID message from being sent) + $EN_DIS +**/ + UINT8 SendDidMsg; + +/** Offset 0x05A0 - Check HECI message before send + Test, 0: disable, 1: enable, Enable/Disable message check. + $EN_DIS +**/ + UINT8 DisableMessageCheck; + +/** Offset 0x05A1 - Skip MBP HOB + Test, 0: disable, 1: enable, Enable/Disable MOB HOB. + $EN_DIS +**/ + UINT8 SkipMbpHob; + +/** Offset 0x05A2 - HECI2 Interface Communication + Test, 0: disable, 1: enable, Adds or Removes HECI2 Device from PCI space. + $EN_DIS +**/ + UINT8 HeciCommunication2; + +/** Offset 0x05A3 - Enable KT device + Test, 0: disable, 1: enable, Enable or Disable KT device. + $EN_DIS +**/ + UINT8 KtDeviceEnable; + +/** Offset 0x05A4 - tRd2RdSG + Delay between Read-to-Read commands in the same Bank Group. 0-Auto, Range 4-54. +**/ + UINT8 tRd2RdSG; + +/** Offset 0x05A5 - tRd2RdDG + Delay between Read-to-Read commands in different Bank Group for DDR4. All other + DDR technologies should set this equal to SG. 0-Auto, Range 4-54. +**/ + UINT8 tRd2RdDG; + +/** Offset 0x05A6 - tRd2RdDR + Delay between Read-to-Read commands in different Ranks. 0-Auto, Range 4-54. +**/ + UINT8 tRd2RdDR; + +/** Offset 0x05A7 - tRd2RdDD + Delay between Read-to-Read commands in different DIMMs. 0-Auto, Range 4-54. +**/ + UINT8 tRd2RdDD; + +/** Offset 0x05A8 - tWr2RdSG + Delay between Write-to-Read commands in the same Bank Group. 0-Auto, Range 4-86. +**/ + UINT8 tWr2RdSG; + +/** Offset 0x05A9 - tWr2RdDG + Delay between Write-to-Read commands in different Bank Group for DDR4. All other + DDR technologies should set this equal to SG. 0-Auto, Range 4-54. +**/ + UINT8 tWr2RdDG; + +/** Offset 0x05AA - tWr2RdDR + Delay between Write-to-Read commands in different Ranks. 0-Auto, Range 4-54. +**/ + UINT8 tWr2RdDR; + +/** Offset 0x05AB - tWr2RdDD + Delay between Write-to-Read commands in different DIMMs. 0-Auto, Range 4-54. +**/ + UINT8 tWr2RdDD; + +/** Offset 0x05AC - tWr2WrSG + Delay between Write-to-Write commands in the same Bank Group. 0-Auto, Range 4-54. +**/ + UINT8 tWr2WrSG; + +/** Offset 0x05AD - tWr2WrDG + Delay between Write-to-Write commands in different Bank Group for DDR4. All other + DDR technologies should set this equal to SG. 0-Auto, Range 4-54. +**/ + UINT8 tWr2WrDG; + +/** Offset 0x05AE - tWr2WrDR + Delay between Write-to-Write commands in different Ranks. 0-Auto, Range 4-54. +**/ + UINT8 tWr2WrDR; + +/** Offset 0x05AF - tWr2WrDD + Delay between Write-to-Write commands in different DIMMs. 0-Auto, Range 4-54. +**/ + UINT8 tWr2WrDD; + +/** Offset 0x05B0 - tRd2WrSG + Delay between Read-to-Write commands in the same Bank Group. 0-Auto, Range 4-54. +**/ + UINT8 tRd2WrSG; + +/** Offset 0x05B1 - tRd2WrDG + Delay between Read-to-Write commands in different Bank Group for DDR4. All other + DDR technologies should set this equal to SG. 0-Auto, Range 4-54. +**/ + UINT8 tRd2WrDG; + +/** Offset 0x05B2 - tRd2WrDR + Delay between Read-to-Write commands in different Ranks. 0-Auto, Range 4-54. +**/ + UINT8 tRd2WrDR; + +/** Offset 0x05B3 - tRd2WrDD + Delay between Read-to-Write commands in different DIMMs. 0-Auto, Range 4-54. +**/ + UINT8 tRd2WrDD; + +/** Offset 0x05B4 - tRRD_L + Min Row Active to Row Active Delay Time for Same Bank Group, DDR4 Only. 0: AUTO, max: 31 +**/ + UINT8 tRRD_L; + +/** Offset 0x05B5 - tRRD_S + Min Row Active to Row Active Delay Time for Different Bank Group, DDR4 Only. 0: + AUTO, max: 31 +**/ + UINT8 tRRD_S; + +/** Offset 0x05B6 - tWTR_L + Min Internal Write to Read Command Delay Time for Same Bank Group, DDR4 Only. 0: + AUTO, max: 60 +**/ + UINT8 tWTR_L; + +/** Offset 0x05B7 - tWTR_S + Min Internal Write to Read Command Delay Time for Different Bank Group, DDR4 Only. + 0: AUTO, max: 28 +**/ + UINT8 tWTR_S; + +/** Offset 0x05B8 +**/ + UINT8 ReservedFspmTestUpd[4]; +} FSP_M_TEST_CONFIG; + +/** Fsp M UPD Configuration +**/ +typedef struct { + +/** Offset 0x0000 +**/ + FSP_UPD_HEADER FspUpdHeader; + +/** Offset 0x0020 +**/ + FSPM_ARCH_UPD FspmArchUpd; + +/** Offset 0x0040 +**/ + FSP_M_CONFIG FspmConfig; + +/** Offset 0x0510 +**/ + FSP_M_TEST_CONFIG FspmTestConfig; + +/** Offset 0x05BC +**/ + UINT32 UpdTerminator; +} FSPM_UPD; + +#pragma pack() + +#endif -- cgit v1.2.3