From 6d27778973edf6bdebfa812eac8893d52961a891 Mon Sep 17 00:00:00 2001 From: Jonathan Zhang Date: Tue, 9 Jun 2020 17:56:53 -0700 Subject: vendorcode/intel: Add edk2-stable202005 support This patch includes (edk2/edk2-stable202005) all required headers for edk2-stable202005 quarterly EDK2 tag from EDK2 github project using below command: >> git clone https://github.com/tianocore/edk2.git vedk2-stable202005 Only include necessary header files. MdePkg/Include/Base.h was updated to avoid compilation errors through safeguarding definitions for MIN, MAX, NULL, ABS, ARRAY_SIZE. Signed-off-by: Jonathan Zhang Change-Id: I3172505d9b829647ee1208c87623172f10b39310 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42239 Reviewed-by: Angel Pons Reviewed-by: Subrata Banik Tested-by: build bot (Jenkins) --- .../MdePkg/Include/Protocol/UsbHostController.h | 502 +++++++++++++++++++++ 1 file changed, 502 insertions(+) create mode 100644 src/vendorcode/intel/edk2/edk2-stable202005/MdePkg/Include/Protocol/UsbHostController.h (limited to 'src/vendorcode/intel/edk2/edk2-stable202005/MdePkg/Include/Protocol/UsbHostController.h') diff --git a/src/vendorcode/intel/edk2/edk2-stable202005/MdePkg/Include/Protocol/UsbHostController.h b/src/vendorcode/intel/edk2/edk2-stable202005/MdePkg/Include/Protocol/UsbHostController.h new file mode 100644 index 0000000000..184d2de450 --- /dev/null +++ b/src/vendorcode/intel/edk2/edk2-stable202005/MdePkg/Include/Protocol/UsbHostController.h @@ -0,0 +1,502 @@ +/** @file + EFI_USB_HC_PROTOCOL as defined in EFI 1.10. + + The USB Host Controller Protocol is used by code, typically USB bus drivers, + running in the EFI boot services environment, to perform data transactions + over a USB bus. In addition, it provides an abstraction for the root hub of the USB bus. + + Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.
+ SPDX-License-Identifier: BSD-2-Clause-Patent + +**/ + +#ifndef _USB_HOSTCONTROLLER_H_ +#define _USB_HOSTCONTROLLER_H_ + +#include + +#define EFI_USB_HC_PROTOCOL_GUID \ + { \ + 0xf5089266, 0x1aa0, 0x4953, {0x97, 0xd8, 0x56, 0x2f, 0x8a, 0x73, 0xb5, 0x19 } \ + } + +/// +/// Forward reference for pure ANSI compatability +/// +typedef struct _EFI_USB_HC_PROTOCOL EFI_USB_HC_PROTOCOL; + +// +// Protocol definitions +// + +/** + Provides software reset for the USB host controller. + + @param This A pointer to the EFI_USB_HC_PROTOCOL instance. + @param Attributes A bit mask of the reset operation to perform. + + @retval EFI_SUCCESS The reset operation succeeded. + @retval EFI_UNSUPPORTED The type of reset specified by Attributes is not currently supported + by the host controller hardware. + @retval EFI_INVALID_PARAMETER Attributes is not valid. + @retval EFI_DEVICE_ERROR An error was encountered while attempting to perform the reset operation. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_USB_HC_PROTOCOL_RESET)( + IN EFI_USB_HC_PROTOCOL *This, + IN UINT16 Attributes + ); + +/** + Retrieves current state of the USB host controller. + + @param This A pointer to the EFI_USB_HC_PROTOCOL instance. + @param State A pointer to the EFI_USB_HC_STATE data structure that + indicates current state of the USB host controller. + + @retval EFI_SUCCESS The state information of the host controller was returned in State. + @retval EFI_INVALID_PARAMETER State is NULL. + @retval EFI_DEVICE_ERROR An error was encountered while attempting to retrieve the host controller's + current state. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_USB_HC_PROTOCOL_GET_STATE)( + IN EFI_USB_HC_PROTOCOL *This, + OUT EFI_USB_HC_STATE *State + ); + +/** + Sets the USB host controller to a specific state. + + @param This A pointer to the EFI_USB_HC_PROTOCOL instance. + @param State Indicates the state of the host controller that will be set. + + @retval EFI_SUCCESS The USB host controller was successfully placed in the state specified by + State. + @retval EFI_INVALID_PARAMETER State is NULL. + @retval EFI_DEVICE_ERROR Failed to set the state specified by State due to device error. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_USB_HC_PROTOCOL_SET_STATE)( + IN EFI_USB_HC_PROTOCOL *This, + IN EFI_USB_HC_STATE State + ); + +/** + Submits control transfer to a target USB device. + + @param This A pointer to the EFI_USB_HC_PROTOCOL instance. + @param DeviceAddress Represents the address of the target device on the USB, which is + assigned during USB enumeration. + @param IsSlowDevice Indicates whether the target device is slow device or full-speed + device. + @param MaximumPacketLength Indicates the maximum packet size that the default control + transfer endpoint is capable of sending or receiving. + @param Request A pointer to the USB device request that will be sent to the USB + device. + @param TransferDirection Specifies the data direction for the transfer. There are three + values available, EfiUsbDataIn, EfiUsbDataOut and EfiUsbNoData. + @param Data A pointer to the buffer of data that will be transmitted to USB + device or received from USB device. + @param DataLength On input, indicates the size, in bytes, of the data buffer specified + by Data. On output, indicates the amount of data actually + transferred. + @param TimeOut Indicates the maximum time, in milliseconds, which the transfer + is allowed to complete. + @param TransferResult A pointer to the detailed result information generated by this + control transfer. + + @retval EFI_SUCCESS The control transfer was completed successfully. + @retval EFI_OUT_OF_RESOURCES The control transfer could not be completed due to a lack of resources. + @retval EFI_INVALID_PARAMETER Some parameters are invalid. + @retval EFI_TIMEOUT The control transfer failed due to timeout. + @retval EFI_DEVICE_ERROR The control transfer failed due to host controller or device error. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_USB_HC_PROTOCOL_CONTROL_TRANSFER)( + IN EFI_USB_HC_PROTOCOL *This, + IN UINT8 DeviceAddress, + IN BOOLEAN IsSlowDevice, + IN UINT8 MaximumPacketLength, + IN EFI_USB_DEVICE_REQUEST *Request, + IN EFI_USB_DATA_DIRECTION TransferDirection, + IN OUT VOID *Data OPTIONAL, + IN OUT UINTN *DataLength OPTIONAL, + IN UINTN TimeOut, + OUT UINT32 *TransferResult + ); + +/** + Submits bulk transfer to a bulk endpoint of a USB device. + + @param This A pointer to the EFI_USB_HC_PROTOCOL instance. + @param DeviceAddress Represents the address of the target device on the USB, which is + assigned during USB enumeration. + @param EndPointAddress The combination of an endpoint number and an endpoint + direction of the target USB device. Each endpoint address + supports data transfer in one direction except the control + endpoint (whose default endpoint address is 0). It is the + caller's responsibility to make sure that the EndPointAddress + represents a bulk endpoint. + @param MaximumPacketLength Indicates the maximum packet size that the default control + transfer endpoint is capable of sending or receiving. + @param Data A pointer to the buffer of data that will be transmitted to USB + device or received from USB device. + @param DataLength On input, indicates the size, in bytes, of the data buffer specified + by Data. On output, indicates the amount of data actually + transferred. + @param DataToggle A pointer to the data toggle value. + @param TimeOut Indicates the maximum time, in milliseconds, which the transfer + is allowed to complete. + @param TransferResult A pointer to the detailed result information of the bulk transfer. + + @retval EFI_SUCCESS The bulk transfer was completed successfully. + @retval EFI_OUT_OF_RESOURCES The bulk transfer could not be completed due to a lack of resources. + @retval EFI_INVALID_PARAMETER Some parameters are invalid. + @retval EFI_TIMEOUT The bulk transfer failed due to timeout. + @retval EFI_DEVICE_ERROR The bulk transfer failed due to host controller or device error. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_USB_HC_PROTOCOL_BULK_TRANSFER)( + IN EFI_USB_HC_PROTOCOL *This, + IN UINT8 DeviceAddress, + IN UINT8 EndPointAddress, + IN UINT8 MaximumPacketLength, + IN OUT VOID *Data, + IN OUT UINTN *DataLength, + IN OUT UINT8 *DataToggle, + IN UINTN TimeOut, + OUT UINT32 *TransferResult + ); + +/** + Submits an asynchronous interrupt transfer to an interrupt endpoint of a USB device. + + @param This A pointer to the EFI_USB_HC_PROTOCOL instance. + @param DeviceAddress Represents the address of the target device on the USB, which is + assigned during USB enumeration. + @param EndPointAddress The combination of an endpoint number and an endpoint + direction of the target USB device. Each endpoint address + supports data transfer in one direction except the control + endpoint (whose default endpoint address is zero). It is the + caller's responsibility to make sure that the + EndPointAddress represents an interrupt endpoint. + @param IsSlowDevice Indicates whether the target device is slow device or full-speed + device. + @param MaximumPacketLength Indicates the maximum packet size that the default control + transfer endpoint is capable of sending or receiving. + @param IsNewTransfer If TRUE, an asynchronous interrupt pipe is built between the host + and the target interrupt endpoint. If FALSE, the specified asynchronous + interrupt pipe is canceled. If TRUE, and an interrupt transfer exists + for the target end point, then EFI_INVALID_PARAMETER is returned. + @param DataToggle A pointer to the data toggle value. On input, it is valid when + IsNewTransfer is TRUE, and it indicates the initial data toggle + value the asynchronous interrupt transfer should adopt. On output, + it is valid when IsNewTransfer is FALSE, and it is updated to indicate + the data toggle value of the subsequent asynchronous interrupt transfer. + @param PollingInterval Indicates the interval, in milliseconds, that the asynchronous + interrupt transfer is polled. + @param DataLength Indicates the length of data to be received at the rate specified by + PollingInterval from the target asynchronous interrupt + endpoint. This parameter is only required when IsNewTransfer is TRUE. + @param CallBackFunction The Callback function. This function is called at the rate specified by + PollingInterval. This parameter is only required when IsNewTransfer is TRUE. + @param Context The context that is passed to the CallBackFunction. + + @retval EFI_SUCCESS The asynchronous interrupt transfer request has been successfully + submitted or canceled. + @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. + @retval EFI_INVALID_PARAMETER Some parameters are invalid. + @retval EFI_TIMEOUT The bulk transfer failed due to timeout. + @retval EFI_DEVICE_ERROR The bulk transfer failed due to host controller or device error. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_USB_HC_PROTOCOL_ASYNC_INTERRUPT_TRANSFER)( + IN EFI_USB_HC_PROTOCOL *This, + IN UINT8 DeviceAddress, + IN UINT8 EndPointAddress, + IN BOOLEAN IsSlowDevice, + IN UINT8 MaxiumPacketLength, + IN BOOLEAN IsNewTransfer, + IN OUT UINT8 *DataToggle, + IN UINTN PollingInterval OPTIONAL, + IN UINTN DataLength OPTIONAL, + IN EFI_ASYNC_USB_TRANSFER_CALLBACK CallBackFunction OPTIONAL, + IN VOID *Context OPTIONAL + ); + +/** + Submits synchronous interrupt transfer to an interrupt endpoint of a USB device. + + @param This A pointer to the EFI_USB_HC_PROTOCOL instance. + @param DeviceAddress Represents the address of the target device on the USB, which is + assigned during USB enumeration. + @param EndPointAddress The combination of an endpoint number and an endpoint + direction of the target USB device. Each endpoint address + supports data transfer in one direction except the control + endpoint (whose default endpoint address is zero). It is the + caller's responsibility to make sure that the + EndPointAddress represents an interrupt endpoint. + @param IsSlowDevice Indicates whether the target device is slow device or full-speed + device. + @param MaximumPacketLength Indicates the maximum packet size that the default control + transfer endpoint is capable of sending or receiving. + @param Data A pointer to the buffer of data that will be transmitted to USB + device or received from USB device. asynchronous interrupt pipe is canceled. + @param DataLength On input, the size, in bytes, of the data buffer specified by Data. + On output, the number of bytes transferred. + @param DataToggle A pointer to the data toggle value. On input, it indicates the initial + data toggle value the synchronous interrupt transfer should adopt; + on output, it is updated to indicate the data toggle value of the + subsequent synchronous interrupt transfer. + @param TimeOut Indicates the maximum time, in milliseconds, which the transfer + is allowed to complete. + @param TransferResult A pointer to the detailed result information from the synchronous + interrupt transfer. + + @retval EFI_SUCCESS The synchronous interrupt transfer was completed successfully. + @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. + @retval EFI_INVALID_PARAMETER Some parameters are invalid. + @retval EFI_TIMEOUT The synchronous interrupt transfer failed due to timeout. + @retval EFI_DEVICE_ERROR The synchronous interrupt transfer failed due to host controller or device error. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_USB_HC_PROTOCOL_SYNC_INTERRUPT_TRANSFER)( + IN EFI_USB_HC_PROTOCOL *This, + IN UINT8 DeviceAddress, + IN UINT8 EndPointAddress, + IN BOOLEAN IsSlowDevice, + IN UINT8 MaximumPacketLength, + IN OUT VOID *Data, + IN OUT UINTN *DataLength, + IN OUT UINT8 *DataToggle, + IN UINTN TimeOut, + OUT UINT32 *TransferResult + ); + +/** + Submits isochronous transfer to an isochronous endpoint of a USB device. + + @param This A pointer to the EFI_USB_HC_PROTOCOL instance. + @param DeviceAddress Represents the address of the target device on the USB, which is + assigned during USB enumeration. + @param EndPointAddress The combination of an endpoint number and an endpoint + direction of the target USB device. Each endpoint address + supports data transfer in one direction except the control + endpoint (whose default endpoint address is 0). It is the caller's + responsibility to make sure that the EndPointAddress + represents an isochronous endpoint. + @param MaximumPacketLength Indicates the maximum packet size that the default control + transfer endpoint is capable of sending or receiving. + @param Data A pointer to the buffer of data that will be transmitted to USB + device or received from USB device. asynchronous interrupt pipe is canceled. + @param DataLength Specifies the length, in bytes, of the data to be sent to or received + from the USB device. + @param TransferResult A pointer to the detailed result information from the isochronous + transfer. + + @retval EFI_SUCCESS The isochronous transfer was completed successfully. + @retval EFI_OUT_OF_RESOURCES The isochronous could not be completed due to a lack of resources. + @retval EFI_INVALID_PARAMETER Some parameters are invalid. + @retval EFI_TIMEOUT The isochronous transfer failed due to timeout. + @retval EFI_DEVICE_ERROR The isochronous transfer failed due to host controller or device error. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_USB_HC_PROTOCOL_ISOCHRONOUS_TRANSFER)( + IN EFI_USB_HC_PROTOCOL *This, + IN UINT8 DeviceAddress, + IN UINT8 EndPointAddress, + IN UINT8 MaximumPacketLength, + IN OUT VOID *Data, + IN UINTN DataLength, + OUT UINT32 *TransferResult + ); + +/** + Submits nonblocking isochronous transfer to an isochronous endpoint of a USB device. + + @param This A pointer to the EFI_USB_HC_PROTOCOL instance. + @param DeviceAddress Represents the address of the target device on the USB, which is + assigned during USB enumeration. + @param EndPointAddress The combination of an endpoint number and an endpoint + direction of the target USB device. Each endpoint address + supports data transfer in one direction except the control + endpoint (whose default endpoint address is zero). It is the + caller's responsibility to make sure that the + EndPointAddress represents an isochronous endpoint. + @param MaximumPacketLength Indicates the maximum packet size that the default control + transfer endpoint is capable of sending or receiving. For isochronous + endpoints, this value is used to reserve the bus time in the schedule, + required for the perframe data payloads. The pipe may, on an ongoing basis, + actually use less bandwidth than that reserved. + @param Data A pointer to the buffer of data that will be transmitted to USB + device or received from USB device. asynchronous interrupt pipe is canceled. + @param DataLength Specifies the length, in bytes, of the data to be sent to or received + from the USB device. + @param IsochronousCallback The Callback function.This function is called if the requested + isochronous transfer is completed. + @param Context Data passed to the IsochronousCallback function. This is + an optional parameter and may be NULL. + + @retval EFI_SUCCESS The asynchronous isochronous transfer was completed successfully. + @retval EFI_OUT_OF_RESOURCES The asynchronous isochronous could not be completed due to a lack of resources. + @retval EFI_INVALID_PARAMETER Some parameters are invalid. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_USB_HC_PROTOCOL_ASYNC_ISOCHRONOUS_TRANSFER)( + IN EFI_USB_HC_PROTOCOL *This, + IN UINT8 DeviceAddress, + IN UINT8 EndPointAddress, + IN UINT8 MaximumPacketLength, + IN OUT VOID *Data, + IN UINTN DataLength, + IN EFI_ASYNC_USB_TRANSFER_CALLBACK IsochronousCallBack, + IN VOID *Context OPTIONAL + ); + +/** + Retrieves the number of root hub ports. + + @param This A pointer to the EFI_USB_HC_PROTOCOL instance. + @param PortNumber A pointer to the number of the root hub ports. + + @retval EFI_SUCCESS The port number was retrieved successfully. + @retval EFI_DEVICE_ERROR An error was encountered while attempting to retrieve the port number. + @retval EFI_INVALID_PARAMETER PortNumber is NULL. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_USB_HC_PROTOCOL_GET_ROOTHUB_PORT_NUMBER)( + IN EFI_USB_HC_PROTOCOL *This, + OUT UINT8 *PortNumber + ); + +/** + Retrieves the current status of a USB root hub port. + + @param This A pointer to the EFI_USB_HC_PROTOCOL instance. + @param PortNumber Specifies the root hub port from which the status is to be retrieved. + This value is zero based. For example, if a root hub has two ports, + then the first port is numbered 0, and the second port is + numbered 1. + @param PortStatus A pointer to the current port status bits and port status change bits. + + @retval EFI_SUCCESS The status of the USB root hub port specified by PortNumber + was returned in PortStatus. + @retval EFI_INVALID_PARAMETER PortNumber is invalid. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_USB_HC_PROTOCOL_GET_ROOTHUB_PORT_STATUS)( + IN EFI_USB_HC_PROTOCOL *This, + IN UINT8 PortNumber, + OUT EFI_USB_PORT_STATUS *PortStatus + ); + +/** + Sets a feature for the specified root hub port. + + @param This A pointer to the EFI_USB_HC_PROTOCOL instance. + @param PortNumber Specifies the root hub port from which the status is to be retrieved. + This value is zero based. For example, if a root hub has two ports, + then the first port is numbered 0, and the second port is + numbered 1. + @param PortFeature Indicates the feature selector associated with the feature set + request. + + @retval EFI_SUCCESS The feature specified by PortFeature was set for the USB + root hub port specified by PortNumber. + @retval EFI_INVALID_PARAMETER PortNumber is invalid or PortFeature is invalid for this function. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_USB_HC_PROTOCOL_SET_ROOTHUB_PORT_FEATURE)( + IN EFI_USB_HC_PROTOCOL *This, + IN UINT8 PortNumber, + IN EFI_USB_PORT_FEATURE PortFeature + ); + +/** + Clears a feature for the specified root hub port. + + @param This A pointer to the EFI_USB_HC_PROTOCOL instance. + @param PortNumber Specifies the root hub port from which the status is to be retrieved. + This value is zero based. For example, if a root hub has two ports, + then the first port is numbered 0, and the second port is + numbered 1. + @param PortFeature Indicates the feature selector associated with the feature clear + request. + + @retval EFI_SUCCESS The feature specified by PortFeature was cleared for the USB + root hub port specified by PortNumber. + @retval EFI_INVALID_PARAMETER PortNumber is invalid or PortFeature is invalid for this function. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_USB_HC_PROTOCOL_CLEAR_ROOTHUB_PORT_FEATURE)( + IN EFI_USB_HC_PROTOCOL *This, + IN UINT8 PortNumber, + IN EFI_USB_PORT_FEATURE PortFeature + ); + + +/// +/// The EFI_USB_HC_PROTOCOL provides USB host controller management, basic data transactions +/// over a USB bus, and USB root hub access. A device driver that wishes to manage a USB bus in a +/// system retrieves the EFI_USB_HC_PROTOCOL instance that is associated with the USB bus to be +/// managed. A device handle for a USB host controller will minimally contain an +/// EFI_DEVICE_PATH_PROTOCOL instance, and an EFI_USB_HC_PROTOCOL instance. +/// +struct _EFI_USB_HC_PROTOCOL { + EFI_USB_HC_PROTOCOL_RESET Reset; + EFI_USB_HC_PROTOCOL_GET_STATE GetState; + EFI_USB_HC_PROTOCOL_SET_STATE SetState; + EFI_USB_HC_PROTOCOL_CONTROL_TRANSFER ControlTransfer; + EFI_USB_HC_PROTOCOL_BULK_TRANSFER BulkTransfer; + EFI_USB_HC_PROTOCOL_ASYNC_INTERRUPT_TRANSFER AsyncInterruptTransfer; + EFI_USB_HC_PROTOCOL_SYNC_INTERRUPT_TRANSFER SyncInterruptTransfer; + EFI_USB_HC_PROTOCOL_ISOCHRONOUS_TRANSFER IsochronousTransfer; + EFI_USB_HC_PROTOCOL_ASYNC_ISOCHRONOUS_TRANSFER AsyncIsochronousTransfer; + EFI_USB_HC_PROTOCOL_GET_ROOTHUB_PORT_NUMBER GetRootHubPortNumber; + EFI_USB_HC_PROTOCOL_GET_ROOTHUB_PORT_STATUS GetRootHubPortStatus; + EFI_USB_HC_PROTOCOL_SET_ROOTHUB_PORT_FEATURE SetRootHubPortFeature; + EFI_USB_HC_PROTOCOL_CLEAR_ROOTHUB_PORT_FEATURE ClearRootHubPortFeature; + /// + /// The major revision number of the USB host controller. The revision information + /// indicates the release of the Universal Serial Bus Specification with which the + /// host controller is compliant. + /// + UINT16 MajorRevision; + /// + /// The minor revision number of the USB host controller. The revision information + /// indicates the release of the Universal Serial Bus Specification with which the + /// host controller is compliant. + /// + UINT16 MinorRevision; +}; + +extern EFI_GUID gEfiUsbHcProtocolGuid; + +#endif -- cgit v1.2.3