From 8b9f28994a1b5702ce33e62e55d1595b1a056892 Mon Sep 17 00:00:00 2001 From: Subrata Banik Date: Thu, 25 Jan 2018 10:50:39 +0530 Subject: vendorcode/intel: Add UDK2017 support This patch includes (edk2/UDK2017) all required headers for UDK2017 from EDK2 github project using below command >> git clone https://github.com/tianocore/edk2.git vUDK2017 commit hash: 66833b2a87d98be8d81d1337c193bcbf0de47d47 Change-Id: If0d5a3fef016c67e9eed6aed9b698b3b13b930c4 Signed-off-by: Subrata Banik Reviewed-on: https://review.coreboot.org/23425 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin Reviewed-by: Furquan Shaikh --- .../Include/Protocol/StorageSecurityCommand.h | 212 +++++++++++++++++++++ 1 file changed, 212 insertions(+) create mode 100644 src/vendorcode/intel/edk2/UDK2017/MdePkg/Include/Protocol/StorageSecurityCommand.h (limited to 'src/vendorcode/intel/edk2/UDK2017/MdePkg/Include/Protocol/StorageSecurityCommand.h') diff --git a/src/vendorcode/intel/edk2/UDK2017/MdePkg/Include/Protocol/StorageSecurityCommand.h b/src/vendorcode/intel/edk2/UDK2017/MdePkg/Include/Protocol/StorageSecurityCommand.h new file mode 100644 index 0000000000..3fa6cbcd8e --- /dev/null +++ b/src/vendorcode/intel/edk2/UDK2017/MdePkg/Include/Protocol/StorageSecurityCommand.h @@ -0,0 +1,212 @@ +/** @file + EFI Storage Security Command Protocol as defined in UEFI 2.3.1 specification. + This protocol is used to abstract mass storage devices to allow code running in + the EFI boot services environment to send security protocol commands to mass + storage devices without specific knowledge of the type of device or controller + that manages the device. + + Copyright (c) 2011, Intel Corporation. All rights reserved.
+ This program and the accompanying materials + are licensed and made available under the terms and conditions of the BSD License + which accompanies this distribution. The full text of the license may be found at + http://opensource.org/licenses/bsd-license.php + + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. + +**/ + +#ifndef __STORAGE_SECURITY_COMMAND_H__ +#define __STORAGE_SECURITY_COMMAND_H__ + +#define EFI_STORAGE_SECURITY_COMMAND_PROTOCOL_GUID \ + { \ + 0xC88B0B6D, 0x0DFC, 0x49A7, {0x9C, 0xB4, 0x49, 0x07, 0x4B, 0x4C, 0x3A, 0x78 } \ + } + +typedef struct _EFI_STORAGE_SECURITY_COMMAND_PROTOCOL EFI_STORAGE_SECURITY_COMMAND_PROTOCOL; + +/** + Send a security protocol command to a device that receives data and/or the result + of one or more commands sent by SendData. + + The ReceiveData function sends a security protocol command to the given MediaId. + The security protocol command sent is defined by SecurityProtocolId and contains + the security protocol specific data SecurityProtocolSpecificData. The function + returns the data from the security protocol command in PayloadBuffer. + + For devices supporting the SCSI command set, the security protocol command is sent + using the SECURITY PROTOCOL IN command defined in SPC-4. + + For devices supporting the ATA command set, the security protocol command is sent + using one of the TRUSTED RECEIVE commands defined in ATA8-ACS if PayloadBufferSize + is non-zero. + + If the PayloadBufferSize is zero, the security protocol command is sent using the + Trusted Non-Data command defined in ATA8-ACS. + + If PayloadBufferSize is too small to store the available data from the security + protocol command, the function shall copy PayloadBufferSize bytes into the + PayloadBuffer and return EFI_WARN_BUFFER_TOO_SMALL. + + If PayloadBuffer or PayloadTransferSize is NULL and PayloadBufferSize is non-zero, + the function shall return EFI_INVALID_PARAMETER. + + If the given MediaId does not support security protocol commands, the function shall + return EFI_UNSUPPORTED. If there is no media in the device, the function returns + EFI_NO_MEDIA. If the MediaId is not the ID for the current media in the device, + the function returns EFI_MEDIA_CHANGED. + + If the security protocol fails to complete within the Timeout period, the function + shall return EFI_TIMEOUT. + + If the security protocol command completes without an error, the function shall + return EFI_SUCCESS. If the security protocol command completes with an error, the + function shall return EFI_DEVICE_ERROR. + + @param This Indicates a pointer to the calling context. + @param MediaId ID of the medium to receive data from. + @param Timeout The timeout, in 100ns units, to use for the execution + of the security protocol command. A Timeout value of 0 + means that this function will wait indefinitely for the + security protocol command to execute. If Timeout is greater + than zero, then this function will return EFI_TIMEOUT if the + time required to execute the receive data command is greater than Timeout. + @param SecurityProtocolId The value of the "Security Protocol" parameter of + the security protocol command to be sent. + @param SecurityProtocolSpecificData The value of the "Security Protocol Specific" parameter + of the security protocol command to be sent. + @param PayloadBufferSize Size in bytes of the payload data buffer. + @param PayloadBuffer A pointer to a destination buffer to store the security + protocol command specific payload data for the security + protocol command. The caller is responsible for having + either implicit or explicit ownership of the buffer. + @param PayloadTransferSize A pointer to a buffer to store the size in bytes of the + data written to the payload data buffer. + + @retval EFI_SUCCESS The security protocol command completed successfully. + @retval EFI_WARN_BUFFER_TOO_SMALL The PayloadBufferSize was too small to store the available + data from the device. The PayloadBuffer contains the truncated data. + @retval EFI_UNSUPPORTED The given MediaId does not support security protocol commands. + @retval EFI_DEVICE_ERROR The security protocol command completed with an error. + @retval EFI_NO_MEDIA There is no media in the device. + @retval EFI_MEDIA_CHANGED The MediaId is not for the current media. + @retval EFI_INVALID_PARAMETER The PayloadBuffer or PayloadTransferSize is NULL and + PayloadBufferSize is non-zero. + @retval EFI_TIMEOUT A timeout occurred while waiting for the security + protocol command to execute. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_STORAGE_SECURITY_RECEIVE_DATA)( + IN EFI_STORAGE_SECURITY_COMMAND_PROTOCOL *This, + IN UINT32 MediaId, + IN UINT64 Timeout, + IN UINT8 SecurityProtocolId, + IN UINT16 SecurityProtocolSpecificData, + IN UINTN PayloadBufferSize, + OUT VOID *PayloadBuffer, + OUT UINTN *PayloadTransferSize + ); + +/** + Send a security protocol command to a device. + + The SendData function sends a security protocol command containing the payload + PayloadBuffer to the given MediaId. The security protocol command sent is + defined by SecurityProtocolId and contains the security protocol specific data + SecurityProtocolSpecificData. If the underlying protocol command requires a + specific padding for the command payload, the SendData function shall add padding + bytes to the command payload to satisfy the padding requirements. + + For devices supporting the SCSI command set, the security protocol command is sent + using the SECURITY PROTOCOL OUT command defined in SPC-4. + + For devices supporting the ATA command set, the security protocol command is sent + using one of the TRUSTED SEND commands defined in ATA8-ACS if PayloadBufferSize + is non-zero. If the PayloadBufferSize is zero, the security protocol command is + sent using the Trusted Non-Data command defined in ATA8-ACS. + + If PayloadBuffer is NULL and PayloadBufferSize is non-zero, the function shall + return EFI_INVALID_PARAMETER. + + If the given MediaId does not support security protocol commands, the function + shall return EFI_UNSUPPORTED. If there is no media in the device, the function + returns EFI_NO_MEDIA. If the MediaId is not the ID for the current media in the + device, the function returns EFI_MEDIA_CHANGED. + + If the security protocol fails to complete within the Timeout period, the function + shall return EFI_TIMEOUT. + + If the security protocol command completes without an error, the function shall return + EFI_SUCCESS. If the security protocol command completes with an error, the function + shall return EFI_DEVICE_ERROR. + + @param This Indicates a pointer to the calling context. + @param MediaId ID of the medium to receive data from. + @param Timeout The timeout, in 100ns units, to use for the execution + of the security protocol command. A Timeout value of 0 + means that this function will wait indefinitely for the + security protocol command to execute. If Timeout is greater + than zero, then this function will return EFI_TIMEOUT if the + time required to execute the receive data command is greater than Timeout. + @param SecurityProtocolId The value of the "Security Protocol" parameter of + the security protocol command to be sent. + @param SecurityProtocolSpecificData The value of the "Security Protocol Specific" parameter + of the security protocol command to be sent. + @param PayloadBufferSize Size in bytes of the payload data buffer. + @param PayloadBuffer A pointer to a destination buffer to store the security + protocol command specific payload data for the security + protocol command. + + @retval EFI_SUCCESS The security protocol command completed successfully. + @retval EFI_UNSUPPORTED The given MediaId does not support security protocol commands. + @retval EFI_DEVICE_ERROR The security protocol command completed with an error. + @retval EFI_NO_MEDIA There is no media in the device. + @retval EFI_MEDIA_CHANGED The MediaId is not for the current media. + @retval EFI_INVALID_PARAMETER The PayloadBuffer is NULL and PayloadBufferSize is non-zero. + @retval EFI_TIMEOUT A timeout occurred while waiting for the security + protocol command to execute. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_STORAGE_SECURITY_SEND_DATA) ( + IN EFI_STORAGE_SECURITY_COMMAND_PROTOCOL *This, + IN UINT32 MediaId, + IN UINT64 Timeout, + IN UINT8 SecurityProtocolId, + IN UINT16 SecurityProtocolSpecificData, + IN UINTN PayloadBufferSize, + IN VOID *PayloadBuffer +); + +/// +/// The EFI_STORAGE_SECURITY_COMMAND_PROTOCOL is used to send security protocol +/// commands to a mass storage device. Two types of security protocol commands +/// are supported. SendData sends a command with data to a device. ReceiveData +/// sends a command that receives data and/or the result of one or more commands +/// sent by SendData. +/// +/// The security protocol command formats supported shall be based on the definition +/// of the SECURITY PROTOCOL IN and SECURITY PROTOCOL OUT commands defined in SPC-4. +/// If the device uses the SCSI command set, no translation is needed in the firmware +/// and the firmware can package the parameters into a SECURITY PROTOCOL IN or SECURITY +/// PROTOCOL OUT command and send the command to the device. If the device uses a +/// non-SCSI command set, the firmware shall map the command and data payload to the +/// corresponding command and payload format defined in the non-SCSI command set +/// (for example, TRUSTED RECEIVE and TRUSTED SEND in ATA8-ACS). +/// +/// The firmware shall automatically add an EFI_STORAGE_SECURITY_COMMAND_PROTOCOL +/// for any storage devices detected during system boot that support SPC-4, ATA8-ACS +/// or their successors. +/// +struct _EFI_STORAGE_SECURITY_COMMAND_PROTOCOL { + EFI_STORAGE_SECURITY_RECEIVE_DATA ReceiveData; + EFI_STORAGE_SECURITY_SEND_DATA SendData; +}; + +extern EFI_GUID gEfiStorageSecurityCommandProtocolGuid; + +#endif -- cgit v1.2.3