From 8b9f28994a1b5702ce33e62e55d1595b1a056892 Mon Sep 17 00:00:00 2001 From: Subrata Banik Date: Thu, 25 Jan 2018 10:50:39 +0530 Subject: vendorcode/intel: Add UDK2017 support This patch includes (edk2/UDK2017) all required headers for UDK2017 from EDK2 github project using below command >> git clone https://github.com/tianocore/edk2.git vUDK2017 commit hash: 66833b2a87d98be8d81d1337c193bcbf0de47d47 Change-Id: If0d5a3fef016c67e9eed6aed9b698b3b13b930c4 Signed-off-by: Subrata Banik Reviewed-on: https://review.coreboot.org/23425 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin Reviewed-by: Furquan Shaikh --- .../edk2/UDK2017/MdePkg/Include/Library/SmbusLib.h | 497 +++++++++++++++++++++ 1 file changed, 497 insertions(+) create mode 100644 src/vendorcode/intel/edk2/UDK2017/MdePkg/Include/Library/SmbusLib.h (limited to 'src/vendorcode/intel/edk2/UDK2017/MdePkg/Include/Library/SmbusLib.h') diff --git a/src/vendorcode/intel/edk2/UDK2017/MdePkg/Include/Library/SmbusLib.h b/src/vendorcode/intel/edk2/UDK2017/MdePkg/Include/Library/SmbusLib.h new file mode 100644 index 0000000000..35bf932ac6 --- /dev/null +++ b/src/vendorcode/intel/edk2/UDK2017/MdePkg/Include/Library/SmbusLib.h @@ -0,0 +1,497 @@ +/** @file + Provides library functions to access SMBUS devices. Libraries of this class + must be ported to a specific SMBUS controller. + +Copyright (c) 2006 - 2008, Intel Corporation. All rights reserved.
+This program and the accompanying materials +are licensed and made available under the terms and conditions of the BSD License +which accompanies this distribution. The full text of the license may be found at +http://opensource.org/licenses/bsd-license.php + +THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. + +**/ + +#ifndef __SMBUS_LIB__ +#define __SMBUS_LIB__ + +/** + Macro that converts SMBUS slave address, SMBUS command, SMBUS data length, + and PEC to a value that can be passed to the SMBUS Library functions. + + Computes an address that is compatible with the SMBUS Library functions. + The unused upper bits of SlaveAddress, Command, and Length are stripped + prior to the generation of the address. + + @param SlaveAddress SMBUS Slave Address. Range 0..127. + @param Command SMBUS Command. Range 0..255. + @param Length SMBUS Data Length. Range 0..32. + @param Pec TRUE if Packet Error Checking is enabled. Otherwise FALSE. + +**/ +#define SMBUS_LIB_ADDRESS(SlaveAddress,Command,Length,Pec) \ + ( ((Pec) ? BIT22: 0) | \ + (((SlaveAddress) & 0x7f) << 1) | \ + (((Command) & 0xff) << 8) | \ + (((Length) & 0x3f) << 16) \ + ) + +/** + Macro that returns the SMBUS Slave Address value from an SmBusAddress Parameter value. + + @param SmBusAddress Address that encodes the SMBUS Slave Address, SMBUS Command, SMBUS Data Length, and PEC +**/ +#define SMBUS_LIB_SLAVE_ADDRESS(SmBusAddress) (((SmBusAddress) >> 1) & 0x7f) + +/** + Macro that returns the SMBUS Command value from an SmBusAddress Parameter value. + + @param SmBusAddress Address that encodes the SMBUS Slave Address, SMBUS Command, SMBUS Data Length, and PEC +**/ +#define SMBUS_LIB_COMMAND(SmBusAddress) (((SmBusAddress) >> 8) & 0xff) + +/** + Macro that returns the SMBUS Data Length value from an SmBusAddress Parameter value. + + @param SmBusAddress Address that encodes the SMBUS Slave Address, SMBUS Command, SMBUS Data Length, and PEC +**/ +#define SMBUS_LIB_LENGTH(SmBusAddress) (((SmBusAddress) >> 16) & 0x3f) + +/** + Macro that returns the SMBUS PEC value from an SmBusAddress Parameter value. + + @param SmBusAddress Address that encodes the SMBUS Slave Address, SMBUS Command, SMBUS Data Length, and PEC +**/ +#define SMBUS_LIB_PEC(SmBusAddress) ((BOOLEAN) (((SmBusAddress) & BIT22) != 0)) + +/** + Macro that returns the set of reserved bits from an SmBusAddress Parameter value. + + @param SmBusAddress Address that encodes the SMBUS Slave Address, SMBUS Command, SMBUS Data Length, and PEC +**/ +#define SMBUS_LIB_RESERVED(SmBusAddress) ((SmBusAddress) & ~(BIT23 - 2)) + +/** + Executes an SMBUS quick read command. + + Executes an SMBUS quick read command on the SMBUS device specified by SmBusAddress. + Only the SMBUS slave address field of SmBusAddress is required. + If Status is not NULL, then the status of the executed command is returned in Status. + If PEC is set in SmBusAddress, then ASSERT(). + If Command in SmBusAddress is not zero, then ASSERT(). + If Length in SmBusAddress is not zero, then ASSERT(). + If any reserved bits of SmBusAddress are set, then ASSERT(). + + @param SmBusAddress Address that encodes the SMBUS Slave Address, + SMBUS Command, SMBUS Data Length, and PEC. + @param Status Return status for the executed command. + This is an optional parameter and may be NULL. + RETURN_SUCCESS The SMBUS command was executed. + RETURN_TIMEOUT A timeout occurred while executing the SMBUS command. + RETURN_DEVICE_ERROR The request was not completed because a failure + reflected in the Host Status Register bit. Device errors are a result + of a transaction collision, illegal command field, unclaimed cycle + (host initiated), or bus errors (collisions). + RETURN_UNSUPPORTED The SMBus operation is not supported. + +**/ +VOID +EFIAPI +SmBusQuickRead ( + IN UINTN SmBusAddress, + OUT RETURN_STATUS *Status OPTIONAL + ); + +/** + Executes an SMBUS quick write command. + + Executes an SMBUS quick write command on the SMBUS device specified by SmBusAddress. + Only the SMBUS slave address field of SmBusAddress is required. + If Status is not NULL, then the status of the executed command is returned in Status. + If PEC is set in SmBusAddress, then ASSERT(). + If Command in SmBusAddress is not zero, then ASSERT(). + If Length in SmBusAddress is not zero, then ASSERT(). + If any reserved bits of SmBusAddress are set, then ASSERT(). + + @param SmBusAddress Address that encodes the SMBUS Slave Address, + SMBUS Command, SMBUS Data Length, and PEC. + @param Status Return status for the executed command. + This is an optional parameter and may be NULL. + RETURN_SUCCESS The SMBUS command was executed. + RETURN_TIMEOUT A timeout occurred while executing the SMBUS command. + RETURN_DEVICE_ERROR The request was not completed because a failure + reflected in the Host Status Register bit. Device errors are a result + of a transaction collision, illegal command field, unclaimed cycle + (host initiated), or bus errors (collisions). + RETURN_UNSUPPORTED The SMBus operation is not supported. + +**/ +VOID +EFIAPI +SmBusQuickWrite ( + IN UINTN SmBusAddress, + OUT RETURN_STATUS *Status OPTIONAL + ); + +/** + Executes an SMBUS receive byte command. + + Executes an SMBUS receive byte command on the SMBUS device specified by SmBusAddress. + Only the SMBUS slave address field of SmBusAddress is required. + The byte received from the SMBUS is returned. + If Status is not NULL, then the status of the executed command is returned in Status. + If Command in SmBusAddress is not zero, then ASSERT(). + If Length in SmBusAddress is not zero, then ASSERT(). + If any reserved bits of SmBusAddress are set, then ASSERT(). + + @param SmBusAddress Address that encodes the SMBUS Slave Address, + SMBUS Command, SMBUS Data Length, and PEC. + @param Status Return status for the executed command. + This is an optional parameter and may be NULL. + RETURN_SUCCESS The SMBUS command was executed. + RETURN_TIMEOUT A timeout occurred while executing the SMBUS command. + RETURN_DEVICE_ERROR The request was not completed because a failure + reflected in the Host Status Register bit. Device errors are a result + of a transaction collision, illegal command field, unclaimed cycle + (host initiated), or bus errors (collisions). + RETURN_CRC_ERROR The checksum is not correct (PEC is incorrect) + RETURN_UNSUPPORTED The SMBus operation is not supported. + + @return The byte received from the SMBUS. + +**/ +UINT8 +EFIAPI +SmBusReceiveByte ( + IN UINTN SmBusAddress, + OUT RETURN_STATUS *Status OPTIONAL + ); + +/** + Executes an SMBUS send byte command. + + Executes an SMBUS send byte command on the SMBUS device specified by SmBusAddress. + The byte specified by Value is sent. + Only the SMBUS slave address field of SmBusAddress is required. Value is returned. + If Status is not NULL, then the status of the executed command is returned in Status. + If Command in SmBusAddress is not zero, then ASSERT(). + If Length in SmBusAddress is not zero, then ASSERT(). + If any reserved bits of SmBusAddress are set, then ASSERT(). + + @param SmBusAddress Address that encodes the SMBUS Slave Address, + SMBUS Command, SMBUS Data Length, and PEC. + @param Value The 8-bit value to send. + @param Status Return status for the executed command. + This is an optional parameter and may be NULL. + RETURN_SUCCESS The SMBUS command was executed. + RETURN_TIMEOUT A timeout occurred while executing the SMBUS command. + RETURN_DEVICE_ERROR The request was not completed because a failure + reflected in the Host Status Register bit. Device errors are a result + of a transaction collision, illegal command field, unclaimed cycle + (host initiated), or bus errors (collisions). + RETURN_CRC_ERROR The checksum is not correct (PEC is incorrect) + RETURN_UNSUPPORTED The SMBus operation is not supported. + + @return The parameter of Value. + +**/ +UINT8 +EFIAPI +SmBusSendByte ( + IN UINTN SmBusAddress, + IN UINT8 Value, + OUT RETURN_STATUS *Status OPTIONAL + ); + +/** + Executes an SMBUS read data byte command. + + Executes an SMBUS read data byte command on the SMBUS device specified by SmBusAddress. + Only the SMBUS slave address and SMBUS command fields of SmBusAddress are required. + The 8-bit value read from the SMBUS is returned. + If Status is not NULL, then the status of the executed command is returned in Status. + If Length in SmBusAddress is not zero, then ASSERT(). + If any reserved bits of SmBusAddress are set, then ASSERT(). + + @param SmBusAddress Address that encodes the SMBUS Slave Address, + SMBUS Command, SMBUS Data Length, and PEC. + @param Status Return status for the executed command. + This is an optional parameter and may be NULL. + RETURN_SUCCESS The SMBUS command was executed. + RETURN_TIMEOUT A timeout occurred while executing the SMBUS command. + RETURN_DEVICE_ERROR The request was not completed because a failure + reflected in the Host Status Register bit. Device errors are a result + of a transaction collision, illegal command field, unclaimed cycle + (host initiated), or bus errors (collisions). + RETURN_CRC_ERROR The checksum is not correct (PEC is incorrect) + RETURN_UNSUPPORTED The SMBus operation is not supported. + + @return The byte read from the SMBUS. + +**/ +UINT8 +EFIAPI +SmBusReadDataByte ( + IN UINTN SmBusAddress, + OUT RETURN_STATUS *Status OPTIONAL + ); + +/** + Executes an SMBUS write data byte command. + + Executes an SMBUS write data byte command on the SMBUS device specified by SmBusAddress. + The 8-bit value specified by Value is written. + Only the SMBUS slave address and SMBUS command fields of SmBusAddress are required. + Value is returned. + If Status is not NULL, then the status of the executed command is returned in Status. + If Length in SmBusAddress is not zero, then ASSERT(). + If any reserved bits of SmBusAddress are set, then ASSERT(). + + @param SmBusAddress Address that encodes the SMBUS Slave Address, + SMBUS Command, SMBUS Data Length, and PEC. + @param Value The 8-bit value to write. + @param Status Return status for the executed command. + This is an optional parameter and may be NULL. + RETURN_SUCCESS The SMBUS command was executed. + RETURN_TIMEOUT A timeout occurred while executing the SMBUS command. + RETURN_DEVICE_ERROR The request was not completed because a failure + reflected in the Host Status Register bit. Device errors are a result + of a transaction collision, illegal command field, unclaimed cycle + (host initiated), or bus errors (collisions). + RETURN_CRC_ERROR The checksum is not correct (PEC is incorrect) + RETURN_UNSUPPORTED The SMBus operation is not supported. + + @return The parameter of Value. + +**/ +UINT8 +EFIAPI +SmBusWriteDataByte ( + IN UINTN SmBusAddress, + IN UINT8 Value, + OUT RETURN_STATUS *Status OPTIONAL + ); + +/** + Executes an SMBUS read data word command. + + Executes an SMBUS read data word command on the SMBUS device specified by SmBusAddress. + Only the SMBUS slave address and SMBUS command fields of SmBusAddress are required. + The 16-bit value read from the SMBUS is returned. + If Status is not NULL, then the status of the executed command is returned in Status. + If Length in SmBusAddress is not zero, then ASSERT(). + If any reserved bits of SmBusAddress are set, then ASSERT(). + + @param SmBusAddress Address that encodes the SMBUS Slave Address, + SMBUS Command, SMBUS Data Length, and PEC. + @param Status Return status for the executed command. + This is an optional parameter and may be NULL. + RETURN_SUCCESS The SMBUS command was executed. + RETURN_TIMEOUT A timeout occurred while executing the SMBUS command. + RETURN_DEVICE_ERROR The request was not completed because a failure + reflected in the Host Status Register bit. Device errors are a result + of a transaction collision, illegal command field, unclaimed cycle + (host initiated), or bus errors (collisions). + RETURN_CRC_ERROR The checksum is not correct (PEC is incorrect) + RETURN_UNSUPPORTED The SMBus operation is not supported. + + @return The byte read from the SMBUS. + +**/ +UINT16 +EFIAPI +SmBusReadDataWord ( + IN UINTN SmBusAddress, + OUT RETURN_STATUS *Status OPTIONAL + ); + +/** + Executes an SMBUS write data word command. + + Executes an SMBUS write data word command on the SMBUS device specified by SmBusAddress. + The 16-bit value specified by Value is written. + Only the SMBUS slave address and SMBUS command fields of SmBusAddress are required. + Value is returned. + If Status is not NULL, then the status of the executed command is returned in Status. + If Length in SmBusAddress is not zero, then ASSERT(). + If any reserved bits of SmBusAddress are set, then ASSERT(). + + @param SmBusAddress Address that encodes the SMBUS Slave Address, + SMBUS Command, SMBUS Data Length, and PEC. + @param Value The 16-bit value to write. + @param Status Return status for the executed command. + This is an optional parameter and may be NULL. + RETURN_SUCCESS The SMBUS command was executed. + RETURN_TIMEOUT A timeout occurred while executing the SMBUS command. + RETURN_DEVICE_ERROR The request was not completed because a failure + reflected in the Host Status Register bit. Device errors are a result + of a transaction collision, illegal command field, unclaimed cycle + (host initiated), or bus errors (collisions). + RETURN_CRC_ERROR The checksum is not correct (PEC is incorrect) + RETURN_UNSUPPORTED The SMBus operation is not supported. + + @return The parameter of Value. + +**/ +UINT16 +EFIAPI +SmBusWriteDataWord ( + IN UINTN SmBusAddress, + IN UINT16 Value, + OUT RETURN_STATUS *Status OPTIONAL + ); + +/** + Executes an SMBUS process call command. + + Executes an SMBUS process call command on the SMBUS device specified by SmBusAddress. + The 16-bit value specified by Value is written. + Only the SMBUS slave address and SMBUS command fields of SmBusAddress are required. + The 16-bit value returned by the process call command is returned. + If Status is not NULL, then the status of the executed command is returned in Status. + If Length in SmBusAddress is not zero, then ASSERT(). + If any reserved bits of SmBusAddress are set, then ASSERT(). + + @param SmBusAddress Address that encodes the SMBUS Slave Address, + SMBUS Command, SMBUS Data Length, and PEC. + @param Value The 16-bit value to write. + @param Status Return status for the executed command. + This is an optional parameter and may be NULL. + RETURN_SUCCESS The SMBUS command was executed. + RETURN_TIMEOUT A timeout occurred while executing the SMBUS command. + RETURN_DEVICE_ERROR The request was not completed because a failure + reflected in the Host Status Register bit. Device errors are a result + of a transaction collision, illegal command field, unclaimed cycle + (host initiated), or bus errors (collisions). + RETURN_CRC_ERROR The checksum is not correct (PEC is incorrect) + RETURN_UNSUPPORTED The SMBus operation is not supported. + + @return The 16-bit value returned by the process call command. + +**/ +UINT16 +EFIAPI +SmBusProcessCall ( + IN UINTN SmBusAddress, + IN UINT16 Value, + OUT RETURN_STATUS *Status OPTIONAL + ); + +/** + Executes an SMBUS read block command. + + Executes an SMBUS read block command on the SMBUS device specified by SmBusAddress. + Only the SMBUS slave address and SMBUS command fields of SmBusAddress are required. + Bytes are read from the SMBUS and stored in Buffer. + The number of bytes read is returned, and will never return a value larger than 32-bytes. + If Status is not NULL, then the status of the executed command is returned in Status. + It is the caller's responsibility to make sure Buffer is large enough for the total number of bytes read. + SMBUS supports a maximum transfer size of 32 bytes, so Buffer does not need to be any larger than 32 bytes. + If Length in SmBusAddress is not zero, then ASSERT(). + If Buffer is NULL, then ASSERT(). + If any reserved bits of SmBusAddress are set, then ASSERT(). + + @param SmBusAddress Address that encodes the SMBUS Slave Address, + SMBUS Command, SMBUS Data Length, and PEC. + @param Buffer Pointer to the buffer to store the bytes read from the SMBUS. + @param Status Return status for the executed command. + This is an optional parameter and may be NULL. + RETURN_SUCCESS The SMBUS command was executed. + RETURN_TIMEOUT A timeout occurred while executing the SMBUS command. + RETURN_DEVICE_ERROR The request was not completed because a failure + reflected in the Host Status Register bit. Device errors are a result + of a transaction collision, illegal command field, unclaimed cycle + (host initiated), or bus errors (collisions). + RETURN_CRC_ERROR The checksum is not correct (PEC is incorrect) + RETURN_UNSUPPORTED The SMBus operation is not supported. + + @return The number of bytes read. + +**/ +UINTN +EFIAPI +SmBusReadBlock ( + IN UINTN SmBusAddress, + OUT VOID *Buffer, + OUT RETURN_STATUS *Status OPTIONAL + ); + +/** + Executes an SMBUS write block command. + + Executes an SMBUS write block command on the SMBUS device specified by SmBusAddress. + The SMBUS slave address, SMBUS command, and SMBUS length fields of SmBusAddress are required. + Bytes are written to the SMBUS from Buffer. + The number of bytes written is returned, and will never return a value larger than 32-bytes. + If Status is not NULL, then the status of the executed command is returned in Status. + If Length in SmBusAddress is zero or greater than 32, then ASSERT(). + If Buffer is NULL, then ASSERT(). + If any reserved bits of SmBusAddress are set, then ASSERT(). + + @param SmBusAddress Address that encodes the SMBUS Slave Address, + SMBUS Command, SMBUS Data Length, and PEC. + @param Buffer Pointer to the buffer to store the bytes read from the SMBUS. + @param Status Return status for the executed command. + This is an optional parameter and may be NULL. + RETURN_TIMEOUT A timeout occurred while executing the SMBUS command. + RETURN_DEVICE_ERROR The request was not completed because a failure + reflected in the Host Status Register bit. Device errors are a result + of a transaction collision, illegal command field, unclaimed cycle + (host initiated), or bus errors (collisions). + RETURN_CRC_ERROR The checksum is not correct (PEC is incorrect) + RETURN_UNSUPPORTED The SMBus operation is not supported. + + @return The number of bytes written. + +**/ +UINTN +EFIAPI +SmBusWriteBlock ( + IN UINTN SmBusAddress, + OUT VOID *Buffer, + OUT RETURN_STATUS *Status OPTIONAL + ); + +/** + Executes an SMBUS block process call command. + + Executes an SMBUS block process call command on the SMBUS device specified by SmBusAddress. + The SMBUS slave address, SMBUS command, and SMBUS length fields of SmBusAddress are required. + Bytes are written to the SMBUS from WriteBuffer. Bytes are then read from the SMBUS into ReadBuffer. + If Status is not NULL, then the status of the executed command is returned in Status. + It is the caller's responsibility to make sure ReadBuffer is large enough for the total number of bytes read. + SMBUS supports a maximum transfer size of 32 bytes, so Buffer does not need to be any larger than 32 bytes. + If Length in SmBusAddress is zero or greater than 32, then ASSERT(). + If WriteBuffer is NULL, then ASSERT(). + If ReadBuffer is NULL, then ASSERT(). + If any reserved bits of SmBusAddress are set, then ASSERT(). + + @param SmBusAddress Address that encodes the SMBUS Slave Address, + SMBUS Command, SMBUS Data Length, and PEC. + @param WriteBuffer Pointer to the buffer of bytes to write to the SMBUS. + @param ReadBuffer Pointer to the buffer of bytes to read from the SMBUS. + @param Status Return status for the executed command. + This is an optional parameter and may be NULL. + RETURN_TIMEOUT A timeout occurred while executing the SMBUS command. + RETURN_DEVICE_ERROR The request was not completed because a failure + reflected in the Host Status Register bit. Device errors are a result + of a transaction collision, illegal command field, unclaimed cycle + (host initiated), or bus errors (collisions). + RETURN_CRC_ERROR The checksum is not correct (PEC is incorrect) + RETURN_UNSUPPORTED The SMBus operation is not supported. + + @return The number of bytes written. + +**/ +UINTN +EFIAPI +SmBusBlockProcessCall ( + IN UINTN SmBusAddress, + IN VOID *WriteBuffer, + OUT VOID *ReadBuffer, + OUT RETURN_STATUS *Status OPTIONAL + ); + + +#endif -- cgit v1.2.3