From 4e9c4c8cc25347693a19aef0201ba2065e3d816f Mon Sep 17 00:00:00 2001 From: Kerry Sheh Date: Mon, 10 Oct 2011 18:23:49 +0800 Subject: sb800: sata combine mode configure fix Using micro CIMX_OPTION_ENABLED/CIMX_OPTION_DISABLED to configure SataIdeCombinedMode is wrong. sbPowerOnInit() use SataIdeCombinedMode to determine whether hide the IDE controller 0: IDE controller is exposed and Combined Mode is enabled. SATA controller has control over Port0 through Port3, IDE controller has control over Port4 and Port5 1: IDE controller is hidden and Combined Mode is disabled, SATA controller has full control of all 6 Ports when operating in non-IDE mode Change-Id: I32e7101737f1dbfff49daa58670e6820b476b250 Signed-off-by: Kerry Sheh Signed-off-by: Kerry Sheh Reviewed-on: http://review.coreboot.org/229 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones --- src/vendorcode/amd/cimx/sb800/SATA.c | 4 ++-- src/vendorcode/amd/cimx/sb800/SBTYPE.h | 10 ++++++++++ 2 files changed, 12 insertions(+), 2 deletions(-) (limited to 'src/vendorcode/amd') diff --git a/src/vendorcode/amd/cimx/sb800/SATA.c b/src/vendorcode/amd/cimx/sb800/SATA.c index 1c0e7e695d..b7bbacdbdb 100644 --- a/src/vendorcode/amd/cimx/sb800/SATA.c +++ b/src/vendorcode/amd/cimx/sb800/SATA.c @@ -470,7 +470,7 @@ sataInitAfterPciEnum ( if (((pConfig->SataClass) != NATIVE_IDE_MODE) && ((pConfig->SataClass) != LEGACY_IDE_MODE)) { // RIAD or AHCI - if ((pConfig->SATAMODE.SataMode.SataIdeCombinedMode) == CIMX_OPTION_DISABLED) { + if ((pConfig->SATAMODE.SataMode.SataIdeCombinedMode) == SATA_IDE_COMBINE_DISABLE) { RWMEM ((ddBar5 + SB_SATA_BAR5_REG00), AccWidthUint8 | S3_SAVE, ~(BIT2 + BIT1 + BIT0), BIT2 + BIT0); RWMEM ((ddBar5 + SB_SATA_BAR5_REG0C), AccWidthUint8 | S3_SAVE, 0xC0, 0x3F); // RPR 8.10 Disabling CCC (Command Completion Coalescing) support. @@ -631,7 +631,7 @@ sataInitLatePost ( //Enable write access to pci header, pm capabilities RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40), AccWidthUint8 | S3_SAVE, 0xff, BIT0); -// if ((pConfig->SATAMODE.SataMode.SataIdeCombinedMode) == CIMX_OPTION_DISABLED) { +// if ((pConfig->SATAMODE.SataMode.SataIdeCombinedMode) == SATA_IDE_COMBINE_DISABLE) { RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40 + 1), AccWidthUint8 | S3_SAVE, ~BIT7, BIT7); // } sataBar5setting (pConfig, &ddBar5); diff --git a/src/vendorcode/amd/cimx/sb800/SBTYPE.h b/src/vendorcode/amd/cimx/sb800/SBTYPE.h index b8278cf5ec..f8e825e45c 100644 --- a/src/vendorcode/amd/cimx/sb800/SBTYPE.h +++ b/src/vendorcode/amd/cimx/sb800/SBTYPE.h @@ -1106,6 +1106,16 @@ typedef unsigned int CIM_STATUS; */ #define CIMX_OPTION_ENABLED 1 +/** + * SATA_IDE_COMBINE_ENABLE -Define Enable Combined Mode + */ +#define SATA_IDE_COMBINE_ENABLE 0 + +/** + * SATA_IDE_COMBINE_DISABLE -Define Disable Combined Mode + */ +#define SATA_IDE_COMBINE_DISABLE 1 + // mov al, code // out 80h, al // jmp $ -- cgit v1.2.3