From 0b11bd0d028089288e52f9f08cdcfafc9910511b Mon Sep 17 00:00:00 2001 From: Marc Jones Date: Sun, 19 Jul 2015 15:20:17 -0600 Subject: vendorcode: Move AMD sources from blobs to vendorcode The AMD AGESA binaryPI sources were incorrectly committed to 3rdparty/blobs. Move them from blobs to vendorcode and fix Kconfig and Makefile.inc to match. Change-Id: I55a777553c1203464d7f7f4293b361fedcfa3283 Signed-off-by: Marc Jones Reviewed-on: http://review.coreboot.org/10982 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer --- .../amd/pi/00660F01/Proc/Fch/Kern/KernFch.h | 200 +++++++++++++++++++++ 1 file changed, 200 insertions(+) create mode 100644 src/vendorcode/amd/pi/00660F01/Proc/Fch/Kern/KernFch.h (limited to 'src/vendorcode/amd/pi/00660F01/Proc/Fch/Kern/KernFch.h') diff --git a/src/vendorcode/amd/pi/00660F01/Proc/Fch/Kern/KernFch.h b/src/vendorcode/amd/pi/00660F01/Proc/Fch/Kern/KernFch.h new file mode 100644 index 0000000000..a20ec19f55 --- /dev/null +++ b/src/vendorcode/amd/pi/00660F01/Proc/Fch/Kern/KernFch.h @@ -0,0 +1,200 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * FCH registers definition + * + * + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: FCH + * @e \$Revision: 309090 $ @e \$Date: 2014-12-09 12:28:05 -0600 (Tue, 09 Dec 2014) $ + * + */ + /***************************************************************************** + * + * Copyright (c) 2008 - 2015, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ***************************************************************************/ + +#define KERN_FCH_SATA_DID 0x7900 +#define KERN_FCH_SATA_AHCI_DID 0x7901 +#define KERN_FCH_SATA_AMDAHCI_DID 0x7904 + +#define KERN_FCH_USB_XHCI_DID 0x7914 // Dev 0x10 Func 0 +#define KERN_FCH_USB_EHCI_DID 0x7908 // Dev 0x12 Func 0 +#define KERN_FCH_SMBUS_DID 0x790B // Dev 0x14 Func 0 +#define KERN_FCH_LPC_DID 0x790E // Dev 0x14 Func 3 +#define KERN_FCH_SD_DID 0x7906 // Dev 0x14 Func 7 + +#define KERN_EHCI1_BUS_DEV_FUN ((0x12 << 3) + 0) +#define KERN_EHCI1_BUS 0 +#define KERN_EHCI1_DEV 18 +#define KERN_EHCI1_FUNC 0 +#define KERN_EHCI2_BUS_DEV_FUN ((0x13 << 3) + 0) +#define KERN_EHCI2_BUS 0 +#define KERN_EHCI2_DEV 19 +#define KERN_EHCI2_FUNC 0 +#define KERN_EHCI3_BUS_DEV_FUN ((0x16 << 3) + 0) +#define KERN_EHCI3_BUS 0 +#define KERN_EHCI3_DEV 22 +#define KERN_EHCI3_FUNC 0 + +// Specific FCH register for Kern +#define FCH_EHCI_REG64 0x64 +#define FCH_EHCI_REGA4 0xA4 + +// HD Audio/Azalia +#define KERN_EVENT_HD_AUDIO_MSI_ENABLE 0x02010100ul // HD Audio/Azalia MSI enable. +#define KERN_EVENT_HD_AUDIO_DISABLE 0x02010101ul // HD Audio/Azalia Disable. +#define KERN_EVENT_HD_AUDIO_CONFIG_CODEC 0x02010102ul // HD Audio/Azalia Configure CODEC. +#define KERN_EVENT_HD_AUDIO_CONFIG_CODEC_BUSY 0x02010103ul // HD Audio/Azalia Configure CODEC Reset. +#define KERN_ERROR_HD_AUDIO_RESET 0x02030100ul // HD Audio/Azalia Reset Failure. +#define KERN_ERROR_HD_AUDIO_CODEC 0x02030101ul // HD Audio/Azalia Codec Not Found. +// HW ACPI +#define KERN_EVENT_HWACPI_PROG_ACPI_PMTBL 0x02010200ul // FCH program ACPI PM Controller Base Address. +#define KERN_EVENT_HWACPI_PROG_ACPI_MMIO_IN_RESET 0x02010201ul // FCH program ACPIMMIO registers in RESET. +#define KERN_EVENT_HWACPI_PROG_SCI_MAP 0x02010202ul // FCH program SCI map by OEM table (ACPIMMIO 0xFED803xx). +#define KERN_EVENT_HWACPI_PROG_GPIO_MAP 0x02010203ul // FCH program GPIO setting by OEM table (ACPIMMIO 0xFED801xx). +#define KERN_EVENT_HWACPI_PROG_SATA_PHY 0x02010204ul // FCH program SATA PHY by OEM table. +#define KERN_EVENT_RTC_DAYLIGHT_SAVING_TIME 0x02010205ul // FCH RTC DayLight Saving Workaround. +#define KERN_EVENT_RTC_CLEAR_BANK_SELECTION 0x02010206ul // FCH RTC clear BankSelection 0x0A Bit4 prevent error. +#define KERN_EVENT_RTC_WA 0x02010207ul // FCH RTC workaround is set. +#define KERN_EVENT_KBD_CONNECTED_THRU_USB 0x02010208ul // FCH IRQ1/IRQ12 connected to USB controller. +#define KERN_EVENT_LEGACY_FREE_SET 0x02010209ul // FCH None Legacy IO setting. +#define KERN_EVENT_ENABLED_ASF_REMOTE_CTRL 0x0201020Aul // FCH Enable ASF remote control function. +#define KERN_EVENT_PCIEXP_WAKESTATUS_WA 0x0201020Bul // FCH PciExp Wake Status Workaround. +#define KERN_EVENT_HWACPI_PROG_OEM_MMIOTBL_IN_RESET 0x0201020Cul // FCH program OEM/Platform BIOS ACPIMMIO registers. +#define KERN_EVENT_HWACPI_PROG_MMIOTBL 0x02010200ul // FCH program ACPIMMIO registers. (1st.) +#define KERN_EVENT_HWACPI_NO_SIOKBC_ENABLE 0x02010201ul // FCH No SIO/KBC function is enabled. +#define KERN_EVENT_HWACPI_NO_SIOKBC_DISABLE 0x02010202ul // FCH No SIO/KBC function is disabled. +#define KERN_EVENT_HWACPI_PROG_SPECIFIC_MMIOTBL 0x02010203ul // FCH program Specific ACPIMMIO registers. (2nd.) +#define KERN_EVENT_HWACPI_PROG_OEM_MMIOTBL 0x02010204ul // FCH program OEM/Platform BIOS ACPIMMIO registers (3rd.) +#define KERN_EVENT_HWACPI_SPREAD_SPECTRUM 0x02010205ul // FCH Enable Spread Spectrum function. +#define KERN_EVENT_HWACPI_INT_CLK_SET 0x02010206ul // FCH Set Intermal Clock Display as 48Mhz. +#define KERN_EVENT_HPET_TIMER_TICK_INTERVAL_WA_SET 0x02010207ul // FCH HPET timer tick interval workaround is set. +#define KERN_EVENT_C1E_ENABLE 0x02010208ul // FCH C1e Enabled. +#define KERN_EVENT_NATIVEPCIE_MODE_SET 0x02010208ul // FCH Native PCIe mode is set. +#define KERN_ERROR_HPET_TBL_NOT_FOUND 0x02030200ul // FCH HPET Table does not found. +// HWM +#define KERN_EVENT_IMC_DISABLE 0x02010300ul // FCH HWM/IMC is disabled. +#define KERN_EVENT_IMC_ENABLE 0x02010301ul // FCH HWM/IMC is enabled. +// IMC +#define KERN_EVENT_IMC_SW_TOGGLE_EVENT 0x02010302ul // FCH IMC Software Toggle Strapping. (IMC statement change) +#define KERN_EVENT_EC_ENABLE 0x02020303ul // FCH EC enabled. +#define KERN_EVENT_EC_KBD_ENABLE 0x02010304ul // FCH IMC EC KBD enabled. +#define KERN_EVENT_EC_CHANNEL0_ENABLE 0x02010305ul // FCH IMC EC channel0 function enabled. +#define KERN_EVENT_IMC_INTO_SLEEP_MODE 0x02010306ul // FCH IMC goes into sleep mode. +#define KERN_EVENT_IMC_CRASH_RESET 0x02010307ul // FCH IMC Crash Reset to prevent repeating the reset forever. +#define KERN_EVENT_IMC_SW_DISABLE_IMC 0x02010308ul // FCH Software disable IMC thru mailbox command. +#define KERN_EVENT_IMC_DISABLE_SUREBOOT_TIMMER 0x02010309ul // FCH Disable SureBoot Timmer. +#define KERN_EVENT_IMC_WAKEUP 0x0201030Aul // FCH IMC wakeup command. +#define KERN_EVENT_IMC_IDLE 0x0201030Bul // FCH IMC idle command. +#define KERN_EVENT_EC_DISABLE 0x0201030Cul // FCH EC disable by jumper setting or board config. +#define KERN_ERROR_IMC_FW_VALIDATE_FAILED 0x02030300ul // FCH IMC firmware validation failure. +// PCIE/AB +#define KERN_EVENT_AB_SLOW_SPEED_ABLINK_CLOCK 0x02010400ul // FCH Set Low Speed AB link clock. +#define KERN_EVENT_AB_RESET_CPU_ON_SYNC_FLOOD 0x02010401ul // FCH set AB reset CPU on sync flood enabled. +#define KERN_EVENT_AB_CLOCK_GATING_ENABLE 0x02010402ul // FCH set AB Clock Gating function enabled. +#define KERN_EVENT_AB_CLOCK_GATING_DISABLE 0x02010403ul // FCH set AB clock Gating function disabled. +#define KERN_EVENT_AB_DMA_MEMORY_W3264B_ENABLE 0x02010404ul // FCH set AB DMA MEMORY Write 32/64B enabled. +#define KERN_EVENT_AB_DMA_MEMORY_W3264B_DISABLED 0x02010405ul // FCH set AB DMA MEMORY Write 32/64B disabled. +#define KERN_EVENT_AB_MEMORY_POWERSAVING_ENABLED 0x02010406ul // FCH Set AB Memory Power Saving enabled. +#define KERN_EVENT_AB_MEMORY_POWERSAVING_DISABLED 0x02010407ul // FCH Set AB Memory Power Saving disabled. +#define KERN_EVENT_AB_ALINK_CLK_GATEOFF_ENABLED 0x02010408ul // FHC set ALink clock Gate-off enabled. +#define KERN_EVENT_AB_ALINK_CLK_GATEOFF_DISABLED 0x02010409ul // FHC set ALink clock Gate-off disabled. +#define KERN_EVENT_AB_BLINK_CLK_GATEOFF_ENABLED 0x0201040Aul // FHC set BLink clock Gate-off enabled. +#define KERN_EVENT_AB_BLINK_CLK_GATEOFF_DISABLED 0x0201040Bul // FHC set BLink clock Gate-off disabled. +// SATA +#define KERN_EVENT_SATA_ENABLE 0x02010500ul // FCH set SATA controller enabled. +#define KERN_EVENT_SATA_MAX_GEN2_MODE_ENABLE 0x02010501ul // FCH set SATA support only Max. GEN2 mode. +#define KERN_EVENT_SATA_SET_CLK_SOURCE_ORG_EXT 0x02010502ul // FCH set SATA clock source as external 48Mhz. +#define KERN_EVENT_SATA_SET_CLK_SOURCE_ORG_INT 0x02010502ul // FCH set SATA clock source as internal 48Mhz. +#define KERN_EVENT_SATA_SET_CLK_SOURCE_100_INT 0x02010503ul // FCH set SATA clock source as internal 100Mhz. +#define KERN_EVENT_SATA_STABLE_MEM_SHUTDOWN_ENABLE 0x02010504ul // FCH set SATA stable memory sutdown enable * Misc. +#define KERN_EVENT_SATA_PROG_SATA_PORT_PHY 0x02010505ul // FCH programming SATA port's PHY. +#define KERN_EVENT_SATA_READ_SQUELCH_FROM_EFUSE 0x02010506ul // FCH programming SATA squelch value from eFuse. +#define KERN_EVENT_SATA_DISABLE 0x02010507ul // FCH set SATA controller disabled. +#define KERN_EVENT_SATA_AHCI_MODE 0x02010508ul // FCH set SATA as AHCI mode. +#define KERN_EVENT_SATA_IDE_2_AHCI_MODE 0x02010509ul // FCH set SATA as IDE_2_AHCI mode. +#define KERN_EVENT_SATA_IDE_MODE 0x0201050Aul // FCH set SATA as IDE mode. +#define KERN_EVENT_SATA_RAID_MODE 0x0201050Bul // FCH set SATA as RAID mode. +#define KERN_EVENT_SATA_MSI_CAP_ENABLE 0x0201050Cul // FCH set SATA MSI Capability Enabled. +#define KERN_EVENT_SATA_SUPPORT_8_DEVICE 0x0201050Dul // FCH set SATA support 8 device mode. +#define KERN_EVENT_SATA_DISABLED_GENERIC_MODE 0x0201050Eul // FCH set SATA disable generic mode. +#define KERN_EVENT_SATA_PHY_PLL_SHUTDOWN 0x0201050Ful // FCH set SATA PHY PLL shutdown. +#define KERN_EVENT_SATA_OOB_DETECTION_ENH 0x02010510ul // FCH set SATA OOB Detection Enhance Mode. +#define KERN_EVENT_SATA_MEM_POWER_SAVING 0x02010511ul // FCH set SATA memory power saving. +#define KERN_EVENT_SATA_DEV_SLP_PORT0 0x02010512ul // FCH set SATA Deep Sleep Mode on Port0. +#define KERN_EVENT_SATA_DEV_SLP_PORT1 0x02010513ul // FCH set SATA Deep Sleep Mode on Port1. +#define KERN_EVENT_SATA_AHCI_DIS_PREFETCH 0x02010514ul // FCH set SATA AHCI disable Prefetch. +#define KERN_EVENT_SATA_PORT_MULT_CAP 0x02010515ul // FCH set SATA Port Mult Capability Enabled. +#define KERN_EVENT_SATA_FIS_BASE_SWITCHING 0x02010516ul // FCH set SATA support FIS-based switching. +#define KERN_EVENT_SATA_AGGR_LINK_PM_CAP 0x02010517ul // FCH set SATA aggressive link power management. +#define KERN_EVENT_SATA_PSC_CAP 0x02010518ul // FCH set SATA support partial state. +#define KERN_EVENT_SATA_SSC_CAP 0x02010519ul // FCH set SATA support Slumber mode. +#define KERN_EVENT_SATA_CCC_CAP 0x0201051Aul // FCH set SATA support command completion coalescing. +#define KERN_EVENT_SATA_AHCI_ENCLOSURE_MANAGEMENT 0x0201051Bul // FCH set SATA support Enclosure Management. +#define KERN_EVENT_SATA_ESP_PORT_ENABLE 0x0201051Cul // FCH set SATA ESP ports (one of ESP ports are set). +#define KERN_EVENT_SATA_BIOS_OS_HANDOFF 0x0201051Dul // FCH set SATA HBA supports the BIOS/OS handoff mechanism. +#define KERN_EVENT_SATA_DRIVE_DETECTION 0x0201051Eul // FCH SATA is excuting SATA drive detection. +#define KERN_EVENT_SATA_CLK_AUTO_OFF 0x0201051Ful // FCH set SATA Auto Clock off function. +#define KERN_EVENT_SATA_PORT_GEN_MODE 0x02010520ul // FCH set SATA port GEN mode. +#define KERN_EVENT_SATA_HOT_REMOVAL_ENH 0x02010521ul // FCH set SATA hot removal enhance mode. +// SD +#define KERN_EVENT_SD_ENABLE 0x02010600ul // FCH set SD controller to enable. +#define KERN_EVENT_SD_AS_DMA_MODE 0x02010601ul // FCH set SD as DMA mode. +#define KERN_EVENT_SD_AS_PIO_MODE 0x02010602ul // FCH set SD as PIO mode. +#define KERN_EVENT_SD_AS_2_0_MODE 0x02010603ul // FCH set SD as 2.0 mode. +#define KERN_EVENT_SD_AS_3_0_MODE 0x02010604ul // FCH set SD as 3.0 mode. +#define KERN_EVENT_SD_CLOCK_MULTIPLIER 0x02010605ul // FCH set SD clock multiplier. +#define KERN_EVENT_SD_DISABLE 0x02010606ul // FCH set SD controller to disable. +// LPC/SPI +#define KERN_EVENT_LPC_CLK0_DISABLE 0x02010700ul // FCH set LPC0 clock disabled. +#define KERN_EVENT_LPC_CLK1_DISABLE 0x02010701ul // FCH set LPC1 clock disabled. +#define KERN_EVENT_LPC_LEGACY_FREE_MODE 0x02010702ul // FCH set LPC as legacy free mode. +#define KERN_EVENT_SPI_QUAL_MODE 0x02010703ul // FCH SPI Qual Mode is enabled (by user selection). +#define KERN_EVENT_SPI_SPEED 0x02010704ul // FCH SPI speed is set by user selection. +#define KERN_EVENT_SPI_FAST_SPEED 0x02010705ul // FCH SPI fast speed is set. +#define KERN_EVENT_SPI_QUALIFY_QUAL_MODE 0x02010706ul // FCH SPI Qual Mode is validated. +// USB +#define KERN_ERROR_USB_ROMSIG_NOT_FOUND 0x02030800ul // FCH ROMSIG not found. +#define KERN_ERROR_USB_XHCI_FW_FOUND 0x02030801ul // FCH XHCI firmware does not exist. +#define KERN_EVENT_USB_EHCI1_ENABLE 0x02010800ul // FCH set EHCI1 enable. +#define KERN_EVENT_USB_EHCI2_ENABLE 0x02010801ul // FCH set EHCI2 enable. +#define KERN_EVENT_USB_EHCI3_ENABLE 0x02010802ul // FCH set EHCI3 enable. +#define KERN_EVENT_USB_XHCI_DISABLE 0x02010803ul // FCH set XHCI disable. +#define KERN_EVENT_USB_PHY_POWER_DOWN 0x02010804ul // FCH set USB PHY powerdown enable. +#define KERN_EVENT_USB_PHY_CALIBRATED 0x02010805ul // FCH set USB PHY calibrated. +#define KERN_EVENT_USB_PORT_PHY_SETTING 0x02010806ul // FCH set USB Port PHY setting. +#define KERN_EVENT_USB_PORT_PHY_CLK_GATING 0x02010807ul // FCH set USB Port PHY Clock Gating. +#define KERN_EVENT_USB_XHCI_USED_PREDEFINE_ADDRESS 0x02010808ul // FCH XHCI ROM location is used user-define address. +#define KERN_EVENT_USB_XHCI_BOOTRAM_PRELOAD 0x02010809ul // FCH XHCI preload its BOOTRAM. +#define KERN_EVENT_USB_XHCI_INSTRUCTRAM_PRELOAD 0x0201080Aul // FCH XHCI preload its InstructionRAM. +#define KERN_EVENT_USB_XHCI_ROM_PREINIT_COMPLETED 0x0201080Bul // FCH XHCI preinit completed. +#define KERN_EVENT_USB_XHCI0_ENABLE 0x0201080Cul // FCH set XHCI0 enable. +#define KERN_EVENT_USB_XHCI1_ENABLE 0x0201080Dul // FCH set XHCI1 enable. -- cgit v1.2.3