From 19961a4b1b5e8d78855c80740528042e47cf899f Mon Sep 17 00:00:00 2001 From: Tristan Corrick Date: Wed, 1 Aug 2018 02:55:09 +1200 Subject: superio/nuvoton/nct6776/acpi: Add parallel port support Exposing the parallel port via ACPI causes Linux to automatically detect the parallel port and load the appropriate modules. Tested on an ASUS P8H61-M LX with Linux 4.9.110 and 4.17.8. However, no parallel port device has been tested. Change-Id: I2529a074e24433d093ad0650a45c7b29238620f3 Signed-off-by: Tristan Corrick Reviewed-on: https://review.coreboot.org/27795 Tested-by: build bot (Jenkins) Reviewed-by: Arthur Heymans --- src/superio/nuvoton/nct6776/acpi/superio.asl | 30 ++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) (limited to 'src/superio/nuvoton') diff --git a/src/superio/nuvoton/nct6776/acpi/superio.asl b/src/superio/nuvoton/nct6776/acpi/superio.asl index b985115111..980eab9cf8 100644 --- a/src/superio/nuvoton/nct6776/acpi/superio.asl +++ b/src/superio/nuvoton/nct6776/acpi/superio.asl @@ -23,6 +23,7 @@ * devices, disabling and reenabling logical devices. * * LDN State + * 0x1 PP Implemented, untested * 0x2 SP1 Implemented, untested * 0x5 KBC Implemented, untested * 0x8 GPIO Implemented, untested @@ -31,6 +32,7 @@ * Controllable through preprocessor defines: * SUPERIO_DEV Device identifier for this SIO (e.g. SIO0) * SUPERIO_PNP_BASE I/O address of the first PnP configuration register + * NCT6776_SHOW_PP If defined, the parallel port will be exposed. * NCT6776_SHOW_SP1 If defined, Serial Port 1 will be exposed. * NCT6776_SHOW_KBC If defined, the Keyboard Controller will be exposed. * NCT6776_SHOW_GPIO If defined, GPIO support will be exposed. @@ -85,6 +87,8 @@ Device(SUPERIO_DEV) { PNP_IRQ0, 8, /* First IRQ */ Offset (0x72), PNP_IRQ1, 8, /* Second IRQ */ + Offset (0x74), + PNP_DMA0, 8, /* DRQ */ } Method (_CRS) @@ -107,6 +111,32 @@ Device(SUPERIO_DEV) { #define PNP_EXIT_MAGIC_1ST 0xaa #include +#ifdef NCT6776_SHOW_PP + #undef SUPERIO_PNP_HID + #undef SUPERIO_PNP_LDN + #undef SUPERIO_PNP_DDN + #undef SUPERIO_PNP_PM_REG + #undef SUPERIO_PNP_PM_VAL + #undef SUPERIO_PNP_PM_LDN + #undef SUPERIO_PNP_IO0 + #undef SUPERIO_PNP_IO1 + #undef SUPERIO_PNP_IO2 + #undef SUPERIO_PNP_IRQ0 + #undef SUPERIO_PNP_IRQ1 + #undef SUPERIO_PNP_DMA + /* + * The extra code required to dynamically reflect ECP in the HID + * isn't currently justified, so the HID is hardcoded as not + * using ECP. "PNP0401" would indicate ECP. + */ + #define SUPERIO_PNP_HID "PNP0400" + #define SUPERIO_PNP_LDN 1 + #define SUPERIO_PNP_IO0 0x08, 0x08 + #define SUPERIO_PNP_IRQ0 + #define SUPERIO_PNP_DMA + #include +#endif + #ifdef NCT6776_SHOW_SP1 #undef SUPERIO_UART_LDN #undef SUPERIO_UART_DDN -- cgit v1.2.3