From b52f7c7c468e0456a126b88a84f6568b873a5ae0 Mon Sep 17 00:00:00 2001 From: Piotr Kleinschmidt Date: Thu, 19 Sep 2019 16:25:56 +0200 Subject: superio/nuvoton/nct5104d: Add soft reset GPIO functionality MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit So far, only hard power off could reset GPIOs state to defaults: IN, Open-drain. Now, defaults are set with every boot to ensure that GPIOs are not in unknown/unwanted state. Change-Id: I67878dbab2ddf0deaaa8f5d79416368c6164ba1d Signed-off-by: Piotr Kleinschmidt Signed-off-by: Michał Żygowski Reviewed-on: https://review.coreboot.org/c/coreboot/+/35482 Tested-by: build bot (Jenkins) Reviewed-by: Felix Held --- src/superio/nuvoton/nct5104d/nct5104d.h | 10 +++++++ src/superio/nuvoton/nct5104d/superio.c | 50 ++++++++++++++++++++++++++++++++- 2 files changed, 59 insertions(+), 1 deletion(-) (limited to 'src/superio/nuvoton/nct5104d') diff --git a/src/superio/nuvoton/nct5104d/nct5104d.h b/src/superio/nuvoton/nct5104d/nct5104d.h index 707e94a90f..9a881059c0 100644 --- a/src/superio/nuvoton/nct5104d/nct5104d.h +++ b/src/superio/nuvoton/nct5104d/nct5104d.h @@ -26,6 +26,16 @@ #define GLOBAL_OPTION_CR26 0x26 #define CR26_LOCK_REG (1 << 4) /* required to access CR10/CR11 */ +/* LDN 0x07 specific registers */ +#define NCT5104D_GPIO0_IO 0xE0 +#define NCT5104D_GPIO1_IO 0xE4 +#define NCT5104D_GPIO6_IO 0xF8 + +/* LDN 0x0F specific registers */ +#define NCT5104D_GPIO0_PP_OD 0xE0 +#define NCT5104D_GPIO1_PP_OD 0xE1 +#define NCT5104D_GPIO6_PP_OD 0xE6 + /* Logical Device Numbers (LDN). */ #define NCT5104D_FDC 0x00 /* FDC - not pinned out */ #define NCT5104D_SP1 0x02 /* UARTA */ diff --git a/src/superio/nuvoton/nct5104d/superio.c b/src/superio/nuvoton/nct5104d/superio.c index 493e0cef57..69f54a731f 100644 --- a/src/superio/nuvoton/nct5104d/superio.c +++ b/src/superio/nuvoton/nct5104d/superio.c @@ -106,6 +106,47 @@ static void route_pins_to_uart(struct device *dev, bool to_uart) pnp_write_config(dev, 0x1c, reg); } +static void reset_gpio_default_in(struct device *dev) +{ + pnp_set_logical_device(dev); + + /* Soft reset GPIOs to default state: IN */ + switch (dev->path.pnp.device) { + case NCT5104D_GPIO0: + pnp_write_config(dev, NCT5104D_GPIO0_IO, 0xFF); + break; + case NCT5104D_GPIO1: + pnp_write_config(dev, NCT5104D_GPIO1_IO, 0xFF); + break; + case NCT5104D_GPIO6: + pnp_write_config(dev, NCT5104D_GPIO6_IO, 0xFF); + break; + default: + break; + } +} + +static void reset_gpio_default_od(struct device *dev) +{ + struct device *gpio0, *gpio1, *gpio6; + + gpio0 = dev_find_slot_pnp(dev->path.pnp.port, NCT5104D_GPIO0); + gpio1 = dev_find_slot_pnp(dev->path.pnp.port, NCT5104D_GPIO1); + gpio6 = dev_find_slot_pnp(dev->path.pnp.port, NCT5104D_GPIO6); + + pnp_set_logical_device(dev); + + /* Soft reset GPIOs to default state: Open-drain */ + if (gpio0 && gpio0->enabled) + pnp_write_config(dev, NCT5104D_GPIO0_PP_OD, 0xFF); + + if (gpio1 && gpio1->enabled) + pnp_write_config(dev, NCT5104D_GPIO1_PP_OD, 0xFF); + + if (gpio6 && gpio6->enabled) + pnp_write_config(dev, NCT5104D_GPIO6_PP_OD, 0xFF); +} + static void nct5104d_init(struct device *dev) { struct superio_nuvoton_nct5104d_config *conf = dev->chip_info; @@ -128,6 +169,13 @@ static void nct5104d_init(struct device *dev) case NCT5104D_GPIO0: case NCT5104D_GPIO1: route_pins_to_uart(dev, false); + reset_gpio_default_in(dev); + break; + case NCT5104D_GPIO6: + reset_gpio_default_in(dev); + break; + case NCT5104D_GPIO_PP_OD: + reset_gpio_default_od(dev); break; default: break; @@ -152,10 +200,10 @@ static struct pnp_info pnp_dev_info[] = { { NULL, NCT5104D_SP3, PNP_IO0 | PNP_IRQ0, 0x07f8, }, { NULL, NCT5104D_SP4, PNP_IO0 | PNP_IRQ0, 0x07f8, }, { NULL, NCT5104D_GPIO_WDT}, - { NULL, NCT5104D_GPIO_PP_OD}, { NULL, NCT5104D_GPIO0}, { NULL, NCT5104D_GPIO1}, { NULL, NCT5104D_GPIO6}, + { NULL, NCT5104D_GPIO_PP_OD}, { NULL, NCT5104D_PORT80}, }; -- cgit v1.2.3