From 03ad2a26b07909a5c34a1ade30f905ae3de5b8a0 Mon Sep 17 00:00:00 2001 From: Edward O'Callaghan Date: Mon, 21 Apr 2014 17:34:38 +1000 Subject: superio/ite/it8721f: Rewrite from hardcoded base addr MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Rewrite early_serial.c implementation to honour a passed base address in device_t, removing any hard coding of values. We also expose early sio init functions as romstage symbols to avoid falsely #including "early_serial.c" in romstage.c of board support. Change-Id: I521b8f7cf85173345b90745c6f2ab66e25429f5d Signed-off-by: Edward O'Callaghan Reviewed-on: http://review.coreboot.org/5561 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel Reviewed-by: Kyösti Mälkki --- src/superio/ite/it8721f/Makefile.inc | 2 +- src/superio/ite/it8721f/chip.h | 3 +- src/superio/ite/it8721f/early_serial.c | 74 +++++++++++++++------------------- src/superio/ite/it8721f/it8721f.h | 18 +++++---- src/superio/ite/it8721f/superio.c | 3 +- 5 files changed, 47 insertions(+), 53 deletions(-) (limited to 'src/superio/ite') diff --git a/src/superio/ite/it8721f/Makefile.inc b/src/superio/ite/it8721f/Makefile.inc index 712d020eb2..ef616f4460 100644 --- a/src/superio/ite/it8721f/Makefile.inc +++ b/src/superio/ite/it8721f/Makefile.inc @@ -18,5 +18,5 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## +romstage-$(CONFIG_SUPERIO_ITE_IT8721F) += early_serial.c ramstage-$(CONFIG_SUPERIO_ITE_IT8721F) += superio.c - diff --git a/src/superio/ite/it8721f/chip.h b/src/superio/ite/it8721f/chip.h index bd04460b5a..e903cd651a 100644 --- a/src/superio/ite/it8721f/chip.h +++ b/src/superio/ite/it8721f/chip.h @@ -21,11 +21,10 @@ #ifndef SUPERIO_ITE_IT8721F_CHIP_H #define SUPERIO_ITE_IT8721F_CHIP_H -#include #include struct superio_ite_it8721f_config { struct pc_keyboard keyboard; }; -#endif +#endif /* SUPERIO_ITE_IT8721F_CHIP_H */ diff --git a/src/superio/ite/it8721f/early_serial.c b/src/superio/ite/it8721f/early_serial.c index 20e19b65aa..df662223dc 100644 --- a/src/superio/ite/it8721f/early_serial.c +++ b/src/superio/ite/it8721f/early_serial.c @@ -3,6 +3,7 @@ * * Copyright (C) 2006 Uwe Hermann * Copyright (C) 2011 QingPei Wang + * Copyright (C) 2014 Edward O'Callaghan * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -20,30 +21,25 @@ */ #include +#include +#include #include "it8721f.h" -/* The base address is 0x2e or 0x4e, depending on config bytes. */ -#define SIO_BASE 0x2e -#define SIO_INDEX SIO_BASE -#define SIO_DATA (SIO_BASE + 1) - /* Global configuration registers. */ #define IT8721F_CONFIG_REG_CC 0x02 /* Configure Control (write-only). */ #define IT8721F_CONFIG_REG_LDN 0x07 /* Logical Device Number. */ #define IT8721F_CONFIG_REG_CLOCKSEL 0x23 /* Clock Selection. */ #define IT8721F_CONFIG_REG_SWSUSP 0x24 /* Software Suspend, Flash I/F. */ -static void it8721f_sio_write(u8 ldn, u8 index, u8 value) +static void it8721f_sio_write(device_t dev, u8 index, u8 value) { - outb(IT8721F_CONFIG_REG_LDN, SIO_BASE); - outb(ldn, SIO_DATA); - outb(index, SIO_BASE); - outb(value, SIO_DATA); + pnp_set_logical_device(dev); + pnp_write_config(dev, index, value); } -static void it8721f_enter_conf(void) +static void it8721f_enter_conf(device_t dev) { - u16 port = 0x2e; /* TODO: Don't hardcode! */ + u16 port = dev >> 8; outb(0x87, port); outb(0x01, port); @@ -51,43 +47,39 @@ static void it8721f_enter_conf(void) outb((port == 0x4e) ? 0xaa : 0x55, port); } -static void it8721f_exit_conf(void) +static void it8721f_exit_conf(device_t dev) { - it8721f_sio_write(0x00, IT8721F_CONFIG_REG_CC, 0x02); + it8721f_sio_write(dev, IT8721F_CONFIG_REG_CC, 0x02); } -/* Select 24MHz CLKIN (48MHz default). */ -void it8721f_24mhz_clkin(void) +static void it8721f_reg_write(device_t dev, u8 index, u8 value) { - it8721f_enter_conf(); - it8721f_sio_write(0x00, IT8721F_CONFIG_REG_CLOCKSEL, 0x1); - it8721f_exit_conf(); + it8721f_enter_conf(dev); + it8721f_sio_write(dev, index, value); + it8721f_exit_conf(dev); } -/* Enable the serial port(s). */ -void it8721f_enable_serial(device_t dev, u16 iobase) +/* + * in romstage.c + * #define CLKIN_DEV PNP_DEV(0x2e, IT8721F_GPIO) + * and pass: CLKIN_DEV + * IT8721F_UART_CLK_PREDIVIDE_24 + * IT8721F_UART_CLK_PREDIVIDE_48 (default) + */ +void it8721f_conf_clkin(device_t dev, u8 predivide) { - /* (1) Enter the configuration state (MB PnP mode). */ - it8721f_enter_conf(); - - /* (2) Modify the data of configuration registers. */ - - /* - * Select the chip to configure (if there's more than one). - * Set bit 7 to select JP3=1, clear bit 7 to select JP3=0. - * If this register is not written, both chips are configured. - */ - - /* it8718f_sio_write(0x00, IT8718F_CONFIG_REG_CONFIGSEL, 0x00); */ - - /* Enable serial port(s). */ - it8721f_sio_write(IT8721F_SP1, 0x30, 0x1); /* Serial port 1 */ - it8721f_sio_write(IT8721F_SP2, 0x30, 0x1); /* Serial port 2 */ + it8721f_reg_write(dev, IT8721F_CONFIG_REG_CLOCKSEL, (0x1 & predivide)); +} - /* Clear software suspend mode (clear bit 0). TODO: Needed? */ - /* it8718f_sio_write(0x00, IT8718F_CONFIG_REG_SWSUSP, 0x00); */ - /* (3) Exit the configuration state (MB PnP mode). */ - it8721f_exit_conf(); +/* Enable the serial port(s). */ +void it8721f_enable_serial(device_t dev, u16 iobase) +{ + it8721f_enter_conf(dev); + pnp_set_logical_device(dev); + pnp_set_enable(dev, 0); + pnp_set_iobase(dev, PNP_IDX_IO0, iobase); + pnp_set_enable(dev, 1); + it8721f_exit_conf(dev); } diff --git a/src/superio/ite/it8721f/it8721f.h b/src/superio/ite/it8721f/it8721f.h index 25300e6659..9d5a528295 100644 --- a/src/superio/ite/it8721f/it8721f.h +++ b/src/superio/ite/it8721f/it8721f.h @@ -19,9 +19,13 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -#ifndef SUPERIO_ITE_IT8721F_IT8721F_H -#define SUPERIO_ITE_IT8721F_IT8721F_H +#ifndef SUPERIO_ITE_IT8721F_H +#define SUPERIO_ITE_IT8721F_H +#include +#include + +/* Logical Device Numbers (LDN). */ #define IT8721F_FDC 0x00 /* Floppy */ #define IT8721F_SP1 0x01 /* Com1 */ #define IT8721F_SP2 0x02 /* Com2 */ @@ -32,10 +36,10 @@ #define IT8721F_GPIO 0x07 /* GPIO */ #define IT8721F_IR 0x0a /* Consumer IR */ -#if defined(__PRE_RAM__) -void it8721f_24mhz_clkin(void); -void it8721f_disable_reboot(void); +#define IT8721F_UART_CLK_PREDIVIDE_48 0x00 /* default */ +#define IT8721F_UART_CLK_PREDIVIDE_24 0x01 + +void it8721f_conf_clkin(device_t dev, u8 predivide); void it8721f_enable_serial(device_t dev, u16 iobase); -#endif -#endif +#endif /* SUPERIO_ITE_IT8721F_H */ diff --git a/src/superio/ite/it8721f/superio.c b/src/superio/ite/it8721f/superio.c index 27eab4905d..300a480e60 100644 --- a/src/superio/ite/it8721f/superio.c +++ b/src/superio/ite/it8721f/superio.c @@ -67,8 +67,7 @@ static struct pnp_info pnp_dev_info[] = { static void enable_dev(struct device *dev) { - pnp_enable_devices(dev, &pnp_ops, - ARRAY_SIZE(pnp_dev_info), pnp_dev_info); + pnp_enable_devices(dev, &pnp_ops, ARRAY_SIZE(pnp_dev_info), pnp_dev_info); } struct chip_operations superio_ite_it8721f_ops = { -- cgit v1.2.3