From deb90f475992c6991f03dbf6035d7b82d2ee9044 Mon Sep 17 00:00:00 2001 From: Duncan Laurie Date: Fri, 8 Mar 2013 17:22:37 -0800 Subject: lynxpoint: Fix up handling for LynxPoint-LP chipsets This configures power management registers according to the 1.2.0 reference code drop. There are many inconsistencies with the documentation and I tried to note those with ?. This does not do the same for LynxPoint-H yet. Change-Id: I9b8f5c24a8b0931075a44398571c9b0d54cce6a6 Signed-off-by: Duncan Laurie Reviewed-on: http://review.coreboot.org/2819 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich --- src/southbridge/intel/lynxpoint/lpc.c | 198 +++++++++++++++++++++------------- 1 file changed, 121 insertions(+), 77 deletions(-) (limited to 'src/southbridge') diff --git a/src/southbridge/intel/lynxpoint/lpc.c b/src/southbridge/intel/lynxpoint/lpc.c index a943ca704b..6b01489fad 100644 --- a/src/southbridge/intel/lynxpoint/lpc.c +++ b/src/southbridge/intel/lynxpoint/lpc.c @@ -307,49 +307,96 @@ static void pch_rtc_init(struct device *dev) rtc_init(rtc_failed); } -/* CougarPoint PCH Power Management init */ -#if 0 -static void cpt_pm_init(struct device *dev) +/* LynxPoint PCH Power Management init */ +static void lpt_pm_init(struct device *dev) { - printk(BIOS_DEBUG, "CougarPoint PM init\n"); - pci_write_config8(dev, 0xa9, 0x47); - RCBA32_AND_OR(0x2238, ~0UL, (1 << 6)|(1 << 0)); - RCBA32_AND_OR(0x228c, ~0UL, (1 << 0)); - RCBA16_AND_OR(0x1100, ~0UL, (1 << 13)|(1 << 14)); - RCBA16_AND_OR(0x0900, ~0UL, (1 << 14)); - RCBA32(0x2304) = 0xc0388400; - RCBA32_AND_OR(0x2314, ~0UL, (1 << 5)|(1 << 18)); - RCBA32_AND_OR(0x2320, ~0UL, (1 << 15)|(1 << 1)); - RCBA32_AND_OR(0x3314, ~0x1f, 0xf); - RCBA32(0x3318) = 0x050f0000; - RCBA32(0x3324) = 0x04000000; - RCBA32_AND_OR(0x3340, ~0UL, 0xfffff); - RCBA32_AND_OR(0x3344, ~0UL, (1 << 1)); - RCBA32(0x3360) = 0x0001c000; - RCBA32(0x3368) = 0x00061100; - RCBA32(0x3378) = 0x7f8fdfff; - RCBA32(0x337c) = 0x000003fc; - RCBA32(0x3388) = 0x00001000; - RCBA32(0x3390) = 0x0001c000; - RCBA32(0x33a0) = 0x00000800; - RCBA32(0x33b0) = 0x00001000; - RCBA32(0x33c0) = 0x00093900; - RCBA32(0x33cc) = 0x24653002; - RCBA32(0x33d0) = 0x062108fe; - RCBA32_AND_OR(0x33d4, 0xf000f000, 0x00670060); - RCBA32(0x3a28) = 0x01010000; - RCBA32(0x3a2c) = 0x01010404; - RCBA32(0x3a80) = 0x01041041; - RCBA32_AND_OR(0x3a84, ~0x0000ffff, 0x00001001); - RCBA32_AND_OR(0x3a84, ~0UL, (1 << 24)); /* SATA 2/3 disabled */ - RCBA32_AND_OR(0x3a88, ~0UL, (1 << 0)); /* SATA 4/5 disabled */ - RCBA32(0x3a6c) = 0x00000001; - RCBA32_AND_OR(0x2344, 0x00ffff00, 0xff00000c); - RCBA32_AND_OR(0x80c, ~(0xff << 20), 0x11 << 20); - RCBA32(0x33c8) = 0; - RCBA32_AND_OR(0x21b0, ~0UL, 0xf); + printk(BIOS_DEBUG, "LynxPoint PM init\n"); +} + +const struct rcba_config_instruction lpt_lp_pm_rcba[] = { + RCBA_RMW_REG_32(0x232c, ~1, 0x00000000), /* 4 */ + RCBA_RMW_REG_32(0x1100, ~0, 0x0000c000), /* 5 */ + RCBA_RMW_REG_32(0x1100, ~0, 0x00000100), /* 6 */ + RCBA_RMW_REG_32(0x1100, ~0, 0x0000003f), /* 7 */ + RCBA_RMW_REG_32(0x2320, ~0x60, 0x10), /* 8? */ + RCBA_RMW_REG_32(0x3314, 0, 0x00012fff), /* 9? */ + RCBA_RMW_REG_32(0x3318, 0, 0x0dcf0400), /* 10? */ + RCBA_RMW_REG_32(0x3324, 0, 0x04000000), /* 11 */ + RCBA_RMW_REG_32(0x3368, 0, 0x00041400), /* 12? */ + RCBA_RMW_REG_32(0x3388, 0, 0x3f8ddbff), /* 13? */ + RCBA_RMW_REG_32(0x33ac, 0, 0x00007001), /* 14? */ + RCBA_RMW_REG_32(0x33b0, 0, 0x00181900), /* 15? */ + RCBA_RMW_REG_32(0x33c0, 0, 0x00060A00), /* 16? */ + RCBA_RMW_REG_32(0x33d0, 0, 0x06200840), /* 17? */ + RCBA_RMW_REG_32(0x3a28, 0, 0x01010101), /* 19 */ + RCBA_RMW_REG_32(0x3a2c, 0, 0x04040404), /* 20 */ + RCBA_RMW_REG_32(0x2b1c, 0, 0x03808033), /* 23? */ + RCBA_RMW_REG_32(0x2b34, 0, 0x80000008), /* 24 */ + RCBA_RMW_REG_32(0x3348, 0, 0x022ddfff), /* 25? */ + RCBA_RMW_REG_32(0x334c, 0, 0x00000001), /* 26 */ + RCBA_RMW_REG_32(0x3358, 0, 0x0001c000), /* 27 */ + RCBA_RMW_REG_32(0x3380, 0, 0x3f8ddbff), /* 28 */ + RCBA_RMW_REG_32(0x3384, 0, 0x0001c7e1), /* 29 */ + RCBA_RMW_REG_32(0x338c, 0, 0x0001c7e1), /* ? */ + RCBA_RMW_REG_32(0x3398, 0, 0x0001c000), /* 30 */ + RCBA_RMW_REG_32(0x33a8, 0, 0x00181900), /* 31? */ + RCBA_RMW_REG_32(0x33dc, 0, 0x00080000), /* 32 */ + RCBA_RMW_REG_32(0x33e0, 0, 0x00000001), /* 33 */ + RCBA_RMW_REG_32(0x3a20, 0, 0x00000404), /* 34 */ + RCBA_RMW_REG_32(0x3a24, 0, 0x01010101), /* 35 */ + RCBA_RMW_REG_32(0x3a30, 0, 0x01010101), /* 36 */ + RCBA_RMW_REG_32(0x0410, ~0, 0x00000003), /* 42 */ + RCBA_RMW_REG_32(0x2618, ~0, 0x08000000), /* 43 */ + RCBA_RMW_REG_32(0x2600, ~0, 0x00000008), /* 44 */ + RCBA_RMW_REG_32(0x33b4, 0, 0x00007001), /* 46? */ + RCBA_RMW_REG_32(0x3350, 0, 0x022ddfff), /* 47? */ + RCBA_RMW_REG_32(0x3354, 0, 0x00000001), /* ? */ + RCBA_RMW_REG_32(0x33d4, ~0, 0x08000000), /* Power Optimizer */ + RCBA_RMW_REG_32(0x33c8, ~0, 0x08000080), /* Power Optimizer */ + RCBA_RMW_REG_32(0x2b10, 0, 0x0000883c), /* Power Optimizer */ + RCBA_RMW_REG_32(0x2b14, 0, 0x1e0a4610), /* Power Optimizer */ + RCBA_RMW_REG_32(0x2b24, 0, 0x40000005), /* Power Optimizer */ + RCBA_RMW_REG_32(0x2b20, 0, 0x0005db01), /* Power Optimizer */ + RCBA_RMW_REG_32(0x3a80, 0, 0x05145005), /* 21? */ + RCBA_END_CONFIG +}; + +/* LynxPoint LP PCH Power Management init */ +static void lpt_lp_pm_init(struct device *dev) +{ + struct southbridge_intel_lynxpoint_config *config = dev->chip_info; + u32 data; + + printk(BIOS_DEBUG, "LynxPoint LP PM init\n"); + + pci_write_config8(dev, 0xa9, 0x46); + + pch_config_rcba(lpt_lp_pm_rcba); + + pci_write_config32(dev, 0xac, + pci_read_config32(dev, 0xac) | (1 << 21)); + + pch_iobp_update(0xCA000000, ~0UL, 0x00000009); + + /* Set RCBA CIR28 0x3A84 based on SATA port enables */ + data = 0x00001005; + /* Port 3 and 2 disabled */ + if ((config->sata_port_map & ((1 << 3)|(1 << 2))) == 0) + data |= (1 << 24) | (1 << 26); + /* Port 1 and 0 disabled */ + if ((config->sata_port_map & ((1 << 1)|(1 << 0))) == 0) + data |= (1 << 20) | (1 << 18); + RCBA32(0x3a84) = data; + + /* Lock */ + RCBA32_OR(0x3a6c, 0x00000001); + + /* Set RCBA 0x33D4 after other setup */ + RCBA32_OR(0x33d4, 0x2fff2fb1); + + /* Set RCBA 0x33C8[15]=1 as last step */ + RCBA32_OR(0x33c8, (1 << 15)); } -#endif static void enable_hpet(void) { @@ -366,7 +413,31 @@ static void enable_hpet(void) static void enable_clock_gating(device_t dev) { -#if CONFIG_INTEL_LYNXPOINT_LP + /* LynxPoint Mobile */ + u32 reg32; + u16 reg16; + + /* DMI */ + RCBA32_AND_OR(0x2234, ~0UL, 0xf); + reg16 = pci_read_config16(dev, GEN_PMCON_1); + reg16 |= (1 << 11) | (1 << 12) | (1 << 14); + reg16 |= (1 << 2); // PCI CLKRUN# Enable + pci_write_config16(dev, GEN_PMCON_1, reg16); + RCBA32_OR(0x900, (1 << 14)); + + reg32 = RCBA32(CG); + reg32 |= (1 << 22); // HDA Dynamic + reg32 |= (1 << 31); // LPC Dynamic + reg32 |= (1 << 16); // PCIe Dynamic + reg32 |= (1 << 27); // HPET Dynamic + reg32 |= (1 << 28); // GPIO Dynamic + RCBA32(CG) = reg32; + + RCBA32_OR(0x38c0, 0x7); // SPI Dynamic +} + +static void enable_lp_clock_gating(device_t dev) +{ /* LynxPoint LP */ u32 reg32; u16 reg16; @@ -383,7 +454,7 @@ static void enable_clock_gating(device_t dev) reg32 |= (1 << 6); pci_write_config32(dev, 0x64, reg32); - RCBA32_AND_OR(0x2614, 0x8fffffff, 0x0f006500); + RCBA32_AND_OR(0x2614, 0x8bffffff, 0x0a206500); RCBA32_OR(0x900, 0x0000031f); reg32 = RCBA32(CG); @@ -398,35 +469,12 @@ static void enable_clock_gating(device_t dev) RCBA32_OR(0x3434, 0x7); // LP LPC - RCBA32_AND_OR(0x333c, 0xff0fffff, 0x00800000); // SATA + RCBA32_AND_OR(0x333c, 0xffcfffff, 0x00c00000); // SATA RCBA32_OR(0x38c0, 0x3c07); // SPI Dynamic pch_iobp_update(0xCF000000, ~0UL, 0x00007001); pch_iobp_update(0xCE00C000, ~0UL, 0x00000001); -#else - /* LynxPoint Mobile */ - u32 reg32; - u16 reg16; - - /* DMI */ - RCBA32_AND_OR(0x2234, ~0UL, 0xf); - reg16 = pci_read_config16(dev, GEN_PMCON_1); - reg16 |= (1 << 11) | (1 << 12) | (1 << 14); - reg16 |= (1 << 2); // PCI CLKRUN# Enable - pci_write_config16(dev, GEN_PMCON_1, reg16); - RCBA32_OR(0x900, (1 << 14)); - - reg32 = RCBA32(CG); - reg32 |= (1 << 22); // HDA Dynamic - reg32 |= (1 << 31); // LPC Dynamic - reg32 |= (1 << 16); // PCIe Dynamic - reg32 |= (1 << 27); // HPET Dynamic - reg32 |= (1 << 28); // GPIO Dynamic - RCBA32(CG) = reg32; - - RCBA32_OR(0x38c0, 0x7); // SPI Dynamic -#endif } static void pch_set_acpi_mode(void) @@ -504,14 +552,14 @@ static void lpc_init(struct device *dev) pch_power_options(dev); /* Initialize power management */ - switch (pch_silicon_type()) { - default: - printk(BIOS_ERR, "Unknown Chipset: 0x%04x\n", dev->device); + if (pch_is_lp()) { + lpt_lp_pm_init(dev); + enable_lp_clock_gating(dev); + } else { + lpt_pm_init(dev); + enable_clock_gating(dev); } - /* Set the state of the GPIO lines. */ - //gpio_init(dev); - /* Initialize the real time clock. */ pch_rtc_init(dev); @@ -521,12 +569,8 @@ static void lpc_init(struct device *dev) /* Initialize the High Precision Event Timers, if present. */ enable_hpet(); - /* Initialize Clock Gating */ - enable_clock_gating(dev); - setup_i8259(); - /* The OS should do this? */ /* Interrupt 9 should be level triggered (SCI) */ i8259_configure_irq_trigger(9, 1); -- cgit v1.2.3