From b2f173e168b5a368eab138a22be5524159532c63 Mon Sep 17 00:00:00 2001 From: Sven Schnelle Date: Thu, 27 Oct 2011 13:05:40 +0200 Subject: i82801gx: Fix port status in AHCI mode The code used PCI register 0x92 to enable sata ports, which is wrong. The ICH7 documentation states: "This register is only used in systems that do not support AHCI. In AHCI enabled systems, bits[3:0] must always be set (ICH7R only) / bits[2,0] must always be set (Mobile only), and the status of the port is controlled through AHCI memory space." Writing 0x0f to ICH7-M doesn't seem to hurt, so lets write 0x0f for both variants. This patch makes sata_ahci work on my Thinkpad T60 and X60s. Change-Id: If3b3daec2e5fbaa446de00272ebde01cd8d52475 Signed-off-by: Sven Schnelle Reviewed-on: http://review.coreboot.org/340 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer --- src/southbridge/intel/i82801gx/chip.h | 1 + src/southbridge/intel/i82801gx/sata.c | 9 ++++++++- 2 files changed, 9 insertions(+), 1 deletion(-) (limited to 'src/southbridge') diff --git a/src/southbridge/intel/i82801gx/chip.h b/src/southbridge/intel/i82801gx/chip.h index b775d39ee8..cc17539d7d 100644 --- a/src/southbridge/intel/i82801gx/chip.h +++ b/src/southbridge/intel/i82801gx/chip.h @@ -68,6 +68,7 @@ struct southbridge_intel_i82801gx_config { uint32_t ide_enable_primary; uint32_t ide_enable_secondary; uint32_t sata_ahci; + uint32_t sata_ports_implemented; int c4onc3_enable:1; }; diff --git a/src/southbridge/intel/i82801gx/sata.c b/src/southbridge/intel/i82801gx/sata.c index c3908489eb..0e7a1a740c 100644 --- a/src/southbridge/intel/i82801gx/sata.c +++ b/src/southbridge/intel/i82801gx/sata.c @@ -30,6 +30,8 @@ static void sata_init(struct device *dev) { u32 reg32; u16 reg16; + u32 *ahci_bar; + /* Get the chip configuration */ config_t *config = dev->chip_info; @@ -106,9 +108,14 @@ static void sata_init(struct device *dev) /* Set Sata Controller Mode. */ pci_write_config8(dev, 0x90, 0x40); // 40=AHCI - /* Port 0 & 1 enable */ + /* In ACHI mode, bit[3:0] must always be set + * (Port status is controlled through AHCI BAR) + */ pci_write_config8(dev, 0x92, 0x0f); + ahci_bar = (u32 *)(pci_read_config32(dev, 0x27) & ~0x3ff); + ahci_bar[3] = config->sata_ports_implemented; + /* SATA Initialization register */ pci_write_config32(dev, 0x94, 0x1a000180); } else { -- cgit v1.2.3