From 8870733b591834c7d20c4227c95d76e757a76883 Mon Sep 17 00:00:00 2001 From: Duncan Laurie Date: Mon, 15 Jul 2013 09:07:20 -0700 Subject: lynxpoint: Add LPT-LP device id and smbus_write_byte This is needed for SMBUS drivers to write to devices. It was copied from existing intel southbridge driver. Change-Id: Id0ce2393b2946a9c741413bca563a1a4dc0a4f5e Signed-off-by: Duncan Laurie Reviewed-on: https://gerrit.chromium.org/gerrit/61893 Reviewed-on: http://review.coreboot.org/4364 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi --- src/southbridge/intel/lynxpoint/smbus.c | 65 ++++++++++++++++++++++++++++++++- 1 file changed, 63 insertions(+), 2 deletions(-) (limited to 'src/southbridge') diff --git a/src/southbridge/intel/lynxpoint/smbus.c b/src/southbridge/intel/lynxpoint/smbus.c index 4786d8b6c9..fa6860568f 100644 --- a/src/southbridge/intel/lynxpoint/smbus.c +++ b/src/southbridge/intel/lynxpoint/smbus.c @@ -53,13 +53,74 @@ static int lsmbus_read_byte(device_t dev, u8 address) device = dev->path.i2c.device; pbus = get_pbus_smbus(dev); - res = find_resource(pbus->dev, 0x20); + res = find_resource(pbus->dev, PCI_BASE_ADDRESS_4); return do_smbus_read_byte(res->base, device, address); } +static int do_smbus_write_byte(unsigned smbus_base, unsigned device, + unsigned address, unsigned data) +{ + unsigned char global_status_register; + + if (smbus_wait_until_ready(smbus_base) < 0) + return SMBUS_WAIT_UNTIL_READY_TIMEOUT; + + /* Setup transaction */ + /* Disable interrupts */ + outb(inb(smbus_base + SMBHSTCTL) & (~1), smbus_base + SMBHSTCTL); + /* Set the device I'm talking too */ + outb(((device & 0x7f) << 1) & ~0x01, smbus_base + SMBXMITADD); + /* Set the command/address... */ + outb(address & 0xff, smbus_base + SMBHSTCMD); + /* Set up for a byte data read */ + outb((inb(smbus_base + SMBHSTCTL) & 0xe3) | (0x2 << 2), + (smbus_base + SMBHSTCTL)); + /* Clear any lingering errors, so the transaction will run */ + outb(inb(smbus_base + SMBHSTSTAT), smbus_base + SMBHSTSTAT); + + /* Clear the data byte... */ + outb(data, smbus_base + SMBHSTDAT0); + + /* Start the command */ + outb((inb(smbus_base + SMBHSTCTL) | 0x40), + smbus_base + SMBHSTCTL); + + /* Poll for transaction completion */ + if (smbus_wait_until_done(smbus_base) < 0) { + printk(BIOS_ERR, "SMBUS transaction timeout\n"); + return SMBUS_WAIT_UNTIL_DONE_TIMEOUT; + } + + global_status_register = inb(smbus_base + SMBHSTSTAT); + + /* Ignore the "In Use" status... */ + global_status_register &= ~(3 << 5); + + /* Read results of transaction */ + if (global_status_register != (1 << 1)) { + printk(BIOS_ERR, "SMBUS transaction error\n"); + return SMBUS_ERROR; + } + + return 0; +} + +static int lsmbus_write_byte(device_t dev, u8 address, u8 data) +{ + u16 device; + struct resource *res; + struct bus *pbus; + + device = dev->path.i2c.device; + pbus = get_pbus_smbus(dev); + res = find_resource(pbus->dev, PCI_BASE_ADDRESS_4); + return do_smbus_write_byte(res->base, device, address, data); +} + static struct smbus_bus_operations lops_smbus_bus = { .read_byte = lsmbus_read_byte, + .write_byte = lsmbus_write_byte, }; static void smbus_set_subsystem(device_t dev, unsigned vendor, unsigned device) @@ -100,7 +161,7 @@ static struct device_operations smbus_ops = { .ops_pci = &smbus_pci_ops, }; -static const unsigned short pci_device_ids[] = { 0x1c22, 0x1e22, 0 }; +static const unsigned short pci_device_ids[] = { 0x1c22, 0x1e22, 0x9c22, 0 }; static const struct pci_driver pch_smbus __pci_driver = { .ops = &smbus_ops, -- cgit v1.2.3