From 548f33a9f4a7675c42822516c285bdf2c8bb64de Mon Sep 17 00:00:00 2001 From: Arthur Heymans Date: Tue, 15 May 2018 16:34:50 +0200 Subject: sb/intel/ibexpeak: Use common Intel SMM code TODO in followup patch: Some not mainboard specific things should be moved out of mainboard_smi_apmc. Change-Id: Ifc2d8f7755ace598e66b162d071d472093e4656e Signed-off-by: Arthur Heymans Reviewed-on: https://review.coreboot.org/c/coreboot/+/26296 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Rudolph --- src/southbridge/intel/ibexpeak/Kconfig | 1 + src/southbridge/intel/ibexpeak/Makefile.inc | 1 - src/southbridge/intel/ibexpeak/pch.h | 1 - src/southbridge/intel/ibexpeak/smi.c | 347 -------------- src/southbridge/intel/ibexpeak/smihandler.c | 696 +--------------------------- 5 files changed, 15 insertions(+), 1031 deletions(-) delete mode 100644 src/southbridge/intel/ibexpeak/smi.c (limited to 'src/southbridge') diff --git a/src/southbridge/intel/ibexpeak/Kconfig b/src/southbridge/intel/ibexpeak/Kconfig index 4763133b80..85c89799e0 100644 --- a/src/southbridge/intel/ibexpeak/Kconfig +++ b/src/southbridge/intel/ibexpeak/Kconfig @@ -32,6 +32,7 @@ config SOUTH_BRIDGE_OPTIONS # dummy select SOUTHBRIDGE_INTEL_COMMON_RCBA_PIRQ select SOUTHBRIDGE_INTEL_COMMON_SMBUS select SOUTHBRIDGE_INTEL_COMMON_SPI + select SOUTHBRIDGE_INTEL_COMMON_SMM select HAVE_USBDEBUG_OPTIONS select COMMON_FADT select ACPI_SATA_GENERATOR diff --git a/src/southbridge/intel/ibexpeak/Makefile.inc b/src/southbridge/intel/ibexpeak/Makefile.inc index 2fb371841a..24eac22b9f 100644 --- a/src/southbridge/intel/ibexpeak/Makefile.inc +++ b/src/southbridge/intel/ibexpeak/Makefile.inc @@ -35,7 +35,6 @@ ramstage-y += ../bd82x6x/me_status.c ramstage-$(CONFIG_ELOG) += ../bd82x6x/elog.c ramstage-y += madt.c -ramstage-y += smi.c smm-y += smihandler.c me.c ../bd82x6x/me_8.x.c ../bd82x6x/pch.c romstage-y += ../bd82x6x/early_usb.c early_smbus.c ../bd82x6x/early_me.c ../bd82x6x/me_status.c ../common/gpio.c early_thermal.c diff --git a/src/southbridge/intel/ibexpeak/pch.h b/src/southbridge/intel/ibexpeak/pch.h index 9b2dd8ac8e..90e7102ed2 100644 --- a/src/southbridge/intel/ibexpeak/pch.h +++ b/src/southbridge/intel/ibexpeak/pch.h @@ -61,7 +61,6 @@ int pch_silicon_revision(void); int pch_silicon_type(void); int pch_silicon_supported(int type, int rev); void pch_iobp_update(u32 address, u32 andvalue, u32 orvalue); -void gpi_route_interrupt(u8 gpi, u8 mode); #if CONFIG(ELOG) void pch_log_state(void); #endif diff --git a/src/southbridge/intel/ibexpeak/smi.c b/src/southbridge/intel/ibexpeak/smi.c deleted file mode 100644 index 4c9f2ac26d..0000000000 --- a/src/southbridge/intel/ibexpeak/smi.c +++ /dev/null @@ -1,347 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#define __SIMPLE_DEVICE__ - -#include -#include -#include -#include -#include -#include -#include -#include -#include "pch.h" - -/* While we read PMBASE dynamically in case it changed, let's - * initialize it with a sane value - */ -static u16 pmbase = DEFAULT_PMBASE; - -/** - * @brief read and clear PM1_STS - * @return PM1_STS register - */ -static u16 reset_pm1_status(void) -{ - u16 reg16; - - reg16 = inw(pmbase + PM1_STS); - /* set status bits are cleared by writing 1 to them */ - outw(reg16, pmbase + PM1_STS); - - return reg16; -} - -static void dump_pm1_status(u16 pm1_sts) -{ - printk(BIOS_DEBUG, "PM1_STS: "); - if (pm1_sts & (1 << 15)) printk(BIOS_DEBUG, "WAK "); - if (pm1_sts & (1 << 14)) printk(BIOS_DEBUG, "PCIEXPWAK "); - if (pm1_sts & (1 << 11)) printk(BIOS_DEBUG, "PRBTNOR "); - if (pm1_sts & (1 << 10)) printk(BIOS_DEBUG, "RTC "); - if (pm1_sts & (1 << 8)) printk(BIOS_DEBUG, "PWRBTN "); - if (pm1_sts & (1 << 5)) printk(BIOS_DEBUG, "GBL "); - if (pm1_sts & (1 << 4)) printk(BIOS_DEBUG, "BM "); - if (pm1_sts & (1 << 0)) printk(BIOS_DEBUG, "TMROF "); - printk(BIOS_DEBUG, "\n"); -} - -/** - * @brief read and clear SMI_STS - * @return SMI_STS register - */ -static u32 reset_smi_status(void) -{ - u32 reg32; - - reg32 = inl(pmbase + SMI_STS); - /* set status bits are cleared by writing 1 to them */ - outl(reg32, pmbase + SMI_STS); - - return reg32; -} - -static void dump_smi_status(u32 smi_sts) -{ - printk(BIOS_DEBUG, "SMI_STS: "); - if (smi_sts & (1 << 26)) printk(BIOS_DEBUG, "SPI "); - if (smi_sts & (1 << 25)) printk(BIOS_DEBUG, "EL_SMI "); - if (smi_sts & (1 << 21)) printk(BIOS_DEBUG, "MONITOR "); - if (smi_sts & (1 << 20)) printk(BIOS_DEBUG, "PCI_EXP_SMI "); - if (smi_sts & (1 << 18)) printk(BIOS_DEBUG, "INTEL_USB2 "); - if (smi_sts & (1 << 17)) printk(BIOS_DEBUG, "LEGACY_USB2 "); - if (smi_sts & (1 << 16)) printk(BIOS_DEBUG, "SMBUS_SMI "); - if (smi_sts & (1 << 15)) printk(BIOS_DEBUG, "SERIRQ_SMI "); - if (smi_sts & (1 << 14)) printk(BIOS_DEBUG, "PERIODIC "); - if (smi_sts & (1 << 13)) printk(BIOS_DEBUG, "TCO "); - if (smi_sts & (1 << 12)) printk(BIOS_DEBUG, "DEVMON "); - if (smi_sts & (1 << 11)) printk(BIOS_DEBUG, "MCSMI "); - if (smi_sts & (1 << 10)) printk(BIOS_DEBUG, "GPI "); - if (smi_sts & (1 << 9)) printk(BIOS_DEBUG, "GPE0 "); - if (smi_sts & (1 << 8)) printk(BIOS_DEBUG, "PM1 "); - if (smi_sts & (1 << 6)) printk(BIOS_DEBUG, "SWSMI_TMR "); - if (smi_sts & (1 << 5)) printk(BIOS_DEBUG, "APM "); - if (smi_sts & (1 << 4)) printk(BIOS_DEBUG, "SLP_SMI "); - if (smi_sts & (1 << 3)) printk(BIOS_DEBUG, "LEGACY_USB "); - if (smi_sts & (1 << 2)) printk(BIOS_DEBUG, "BIOS "); - printk(BIOS_DEBUG, "\n"); -} - - -/** - * @brief read and clear GPE0_STS - * @return GPE0_STS register - */ -static u32 reset_gpe0_status(void) -{ - u32 reg32; - - reg32 = inl(pmbase + GPE0_STS); - /* set status bits are cleared by writing 1 to them */ - outl(reg32, pmbase + GPE0_STS); - - return reg32; -} - -static void dump_gpe0_status(u32 gpe0_sts) -{ - int i; - printk(BIOS_DEBUG, "GPE0_STS: "); - for (i=31; i>= 16; i--) { - if (gpe0_sts & (1 << i)) printk(BIOS_DEBUG, "GPIO%d ", (i-16)); - } - if (gpe0_sts & (1 << 14)) printk(BIOS_DEBUG, "USB4 "); - if (gpe0_sts & (1 << 13)) printk(BIOS_DEBUG, "PME_B0 "); - if (gpe0_sts & (1 << 12)) printk(BIOS_DEBUG, "USB3 "); - if (gpe0_sts & (1 << 11)) printk(BIOS_DEBUG, "PME "); - if (gpe0_sts & (1 << 10)) printk(BIOS_DEBUG, "EL_SCI/BATLOW "); - if (gpe0_sts & (1 << 9)) printk(BIOS_DEBUG, "PCI_EXP "); - if (gpe0_sts & (1 << 8)) printk(BIOS_DEBUG, "RI "); - if (gpe0_sts & (1 << 7)) printk(BIOS_DEBUG, "SMB_WAK "); - if (gpe0_sts & (1 << 6)) printk(BIOS_DEBUG, "TCO_SCI "); - if (gpe0_sts & (1 << 5)) printk(BIOS_DEBUG, "AC97 "); - if (gpe0_sts & (1 << 4)) printk(BIOS_DEBUG, "USB2 "); - if (gpe0_sts & (1 << 3)) printk(BIOS_DEBUG, "USB1 "); - if (gpe0_sts & (1 << 2)) printk(BIOS_DEBUG, "HOT_PLUG "); - if (gpe0_sts & (1 << 0)) printk(BIOS_DEBUG, "THRM "); - printk(BIOS_DEBUG, "\n"); -} - - -/** - * @brief read and clear ALT_GP_SMI_STS - * @return ALT_GP_SMI_STS register - */ -static u16 reset_alt_gp_smi_status(void) -{ - u16 reg16; - - reg16 = inl(pmbase + ALT_GP_SMI_STS); - /* set status bits are cleared by writing 1 to them */ - outl(reg16, pmbase + ALT_GP_SMI_STS); - - return reg16; -} - -static void dump_alt_gp_smi_status(u16 alt_gp_smi_sts) -{ - int i; - printk(BIOS_DEBUG, "ALT_GP_SMI_STS: "); - for (i=15; i>= 0; i--) { - if (alt_gp_smi_sts & (1 << i)) printk(BIOS_DEBUG, "GPI%d ", i); - } - printk(BIOS_DEBUG, "\n"); -} - - - -/** - * @brief read and clear TCOx_STS - * @return TCOx_STS registers - */ -static u32 reset_tco_status(void) -{ - u32 tcobase = pmbase + 0x60; - u32 reg32; - - reg32 = inl(tcobase + 0x04); - /* set status bits are cleared by writing 1 to them */ - outl(reg32 & ~(1 << 18), tcobase + 0x04); // Don't clear BOOT_STS before SECOND_TO_STS - if (reg32 & (1 << 18)) - outl(reg32 & (1 << 18), tcobase + 0x04); // clear BOOT_STS - - return reg32; -} - - -static void dump_tco_status(u32 tco_sts) -{ - printk(BIOS_DEBUG, "TCO_STS: "); - if (tco_sts & (1 << 20)) printk(BIOS_DEBUG, "SMLINK_SLV "); - if (tco_sts & (1 << 18)) printk(BIOS_DEBUG, "BOOT "); - if (tco_sts & (1 << 17)) printk(BIOS_DEBUG, "SECOND_TO "); - if (tco_sts & (1 << 16)) printk(BIOS_DEBUG, "INTRD_DET "); - if (tco_sts & (1 << 12)) printk(BIOS_DEBUG, "DMISERR "); - if (tco_sts & (1 << 10)) printk(BIOS_DEBUG, "DMISMI "); - if (tco_sts & (1 << 9)) printk(BIOS_DEBUG, "DMISCI "); - if (tco_sts & (1 << 8)) printk(BIOS_DEBUG, "BIOSWR "); - if (tco_sts & (1 << 7)) printk(BIOS_DEBUG, "NEWCENTURY "); - if (tco_sts & (1 << 3)) printk(BIOS_DEBUG, "TIMEOUT "); - if (tco_sts & (1 << 2)) printk(BIOS_DEBUG, "TCO_INT "); - if (tco_sts & (1 << 1)) printk(BIOS_DEBUG, "SW_TCO "); - if (tco_sts & (1 << 0)) printk(BIOS_DEBUG, "NMI2SMI "); - printk(BIOS_DEBUG, "\n"); -} - - - -/** - * @brief Set the EOS bit - */ -static void smi_set_eos(void) -{ - u8 reg8; - - reg8 = inb(pmbase + SMI_EN); - reg8 |= EOS; - outb(reg8, pmbase + SMI_EN); -} - -void southbridge_smm_init(void) -{ - u32 smi_en; - u16 pm1_en; - u32 gpe0_en; - -#if CONFIG(ELOG) - /* Log events from chipset before clearing */ - pch_log_state(); -#endif - - printk(BIOS_DEBUG, "Initializing southbridge SMI..."); - - pmbase = pci_read_config32(PCI_DEV(0, 0x1f, 0), - PMBASE) & 0xff80; - - printk(BIOS_SPEW, " ... pmbase = 0x%04x\n", pmbase); - - smi_en = inl(pmbase + SMI_EN); - if (smi_en & APMC_EN) { - printk(BIOS_INFO, "SMI# handler already enabled?\n"); - return; - } - - printk(BIOS_DEBUG, "\n"); - dump_smi_status(reset_smi_status()); - dump_pm1_status(reset_pm1_status()); - dump_gpe0_status(reset_gpe0_status()); - dump_alt_gp_smi_status(reset_alt_gp_smi_status()); - dump_tco_status(reset_tco_status()); - - /* Disable GPE0 PME_B0 */ - gpe0_en = inl(pmbase + GPE0_EN); - gpe0_en &= ~PME_B0_EN; - outl(gpe0_en, pmbase + GPE0_EN); - - pm1_en = 0; - pm1_en |= PWRBTN_EN; - pm1_en |= GBL_EN; - outw(pm1_en, pmbase + PM1_EN); - - /* Enable SMI generation: - * - on TCO events - * - on APMC writes (io 0xb2) - * - on writes to SLP_EN (sleep states) - * - on writes to GBL_RLS (bios commands) - * No SMIs: - * - on microcontroller writes (io 0x62/0x66) - */ - - smi_en = 0; /* reset SMI enables */ - -#if 0 - smi_en |= LEGACY_USB2_EN | LEGACY_USB_EN; -#endif - smi_en |= TCO_EN; - smi_en |= APMC_EN; -#if DEBUG_PERIODIC_SMIS - /* Set DEBUG_PERIODIC_SMIS in pch.h to debug using - * periodic SMIs. - */ - smi_en |= PERIODIC_EN; -#endif - smi_en |= SLP_SMI_EN; -#if 0 - smi_en |= BIOS_EN; -#endif - - /* The following need to be on for SMIs to happen */ - smi_en |= EOS | GBL_SMI_EN; - - outl(smi_en, pmbase + SMI_EN); -} - -void southbridge_trigger_smi(void) -{ - /** - * There are several methods of raising a controlled SMI# via - * software, among them: - * - Writes to io 0xb2 (APMC) - * - Writes to the Local Apic ICR with Delivery mode SMI. - * - * Using the local apic is a bit more tricky. According to - * AMD Family 11 Processor BKDG no destination shorthand must be - * used. - * The whole SMM initialization is quite a bit hardware specific, so - * I'm not too worried about the better of the methods at the moment - */ - - /* raise an SMI interrupt */ - printk(BIOS_SPEW, " ... raise SMI#\n"); - outb(0x00, 0xb2); -} - -void southbridge_clear_smi_status(void) -{ - /* Clear SMI status */ - reset_smi_status(); - - /* Clear PM1 status */ - reset_pm1_status(); - - /* Set EOS bit so other SMIs can occur. */ - smi_set_eos(); -} - -void smm_setup_structures(void *gnvs, void *tcg, void *smi1) -{ - /* - * Issue SMI to set the gnvs pointer in SMM. - * tcg and smi1 are unused. - * - * EAX = APM_CNT_GNVS_UPDATE - * EBX = gnvs pointer - * EDX = APM_CNT - */ - asm volatile ( - "outb %%al, %%dx\n\t" - : /* ignore result */ - : "a" (APM_CNT_GNVS_UPDATE), - "b" ((u32)gnvs), - "d" (APM_CNT) - ); -} diff --git a/src/southbridge/intel/ibexpeak/smihandler.c b/src/southbridge/intel/ibexpeak/smihandler.c index fabe1c41ba..dbc412c072 100644 --- a/src/southbridge/intel/ibexpeak/smihandler.c +++ b/src/southbridge/intel/ibexpeak/smihandler.c @@ -35,13 +35,7 @@ */ #include #include - -/* While we read PMBASE dynamically in case it changed, let's - * initialize it with a sane value - */ -static u16 pmbase = DEFAULT_PMBASE; - -static u8 smm_initialized = 0; +#include /* GNVS needs to be updated by an 0xEA PM Trap (B2) after it has been located * by coreboot. @@ -52,193 +46,6 @@ global_nvs_t *smm_get_gnvs(void) return gnvs; } -static void alt_gpi_mask(u16 clr, u16 set) -{ - u16 alt_gp = inw(pmbase + ALT_GP_SMI_EN); - alt_gp &= ~clr; - alt_gp |= set; - outw(alt_gp, pmbase + ALT_GP_SMI_EN); -} - -static void gpe0_mask(u32 clr, u32 set) -{ - u32 gpe0 = inl(pmbase + GPE0_EN); - gpe0 &= ~clr; - gpe0 |= set; - outl(gpe0, pmbase + GPE0_EN); -} - -void gpi_route_interrupt(u8 gpi, u8 mode) -{ - u32 gpi_rout; - if (gpi >= 16) - return; - - alt_gpi_mask(1 << gpi, 0); - gpe0_mask(1 << (gpi+16), 0); - - gpi_rout = pci_read_config32(PCI_DEV(0, 0x1f, 0), GPIO_ROUT); - gpi_rout &= ~(3 << (2 * gpi)); - gpi_rout |= ((mode & 3) << (2 * gpi)); - pci_write_config32(PCI_DEV(0, 0x1f, 0), GPIO_ROUT, gpi_rout); - - if (mode == GPI_IS_SCI) - gpe0_mask(0, 1 << (gpi+16)); - else if (mode == GPI_IS_SMI) - alt_gpi_mask(0, 1 << gpi); -} - -/** - * @brief read and clear PM1_STS - * @return PM1_STS register - */ -static u16 reset_pm1_status(void) -{ - u16 reg16; - - reg16 = inw(pmbase + PM1_STS); - /* set status bits are cleared by writing 1 to them */ - outw(reg16, pmbase + PM1_STS); - - return reg16; -} - -static void dump_pm1_status(u16 pm1_sts) -{ - printk(BIOS_SPEW, "PM1_STS: "); - if (pm1_sts & (1 << 15)) printk(BIOS_SPEW, "WAK "); - if (pm1_sts & (1 << 14)) printk(BIOS_SPEW, "PCIEXPWAK "); - if (pm1_sts & (1 << 11)) printk(BIOS_SPEW, "PRBTNOR "); - if (pm1_sts & (1 << 10)) printk(BIOS_SPEW, "RTC "); - if (pm1_sts & (1 << 8)) printk(BIOS_SPEW, "PWRBTN "); - if (pm1_sts & (1 << 5)) printk(BIOS_SPEW, "GBL "); - if (pm1_sts & (1 << 4)) printk(BIOS_SPEW, "BM "); - if (pm1_sts & (1 << 0)) printk(BIOS_SPEW, "TMROF "); - printk(BIOS_SPEW, "\n"); - int reg16 = inw(pmbase + PM1_EN); - printk(BIOS_SPEW, "PM1_EN: %x\n", reg16); -} - -/** - * @brief read and clear SMI_STS - * @return SMI_STS register - */ -static u32 reset_smi_status(void) -{ - u32 reg32; - - reg32 = inl(pmbase + SMI_STS); - /* set status bits are cleared by writing 1 to them */ - outl(reg32, pmbase + SMI_STS); - - return reg32; -} - -static void dump_smi_status(u32 smi_sts) -{ - printk(BIOS_DEBUG, "SMI_STS: "); - if (smi_sts & (1 << 26)) printk(BIOS_DEBUG, "SPI "); - if (smi_sts & (1 << 21)) printk(BIOS_DEBUG, "MONITOR "); - if (smi_sts & (1 << 20)) printk(BIOS_DEBUG, "PCI_EXP_SMI "); - if (smi_sts & (1 << 18)) printk(BIOS_DEBUG, "INTEL_USB2 "); - if (smi_sts & (1 << 17)) printk(BIOS_DEBUG, "LEGACY_USB2 "); - if (smi_sts & (1 << 16)) printk(BIOS_DEBUG, "SMBUS_SMI "); - if (smi_sts & (1 << 15)) printk(BIOS_DEBUG, "SERIRQ_SMI "); - if (smi_sts & (1 << 14)) printk(BIOS_DEBUG, "PERIODIC "); - if (smi_sts & (1 << 13)) printk(BIOS_DEBUG, "TCO "); - if (smi_sts & (1 << 12)) printk(BIOS_DEBUG, "DEVMON "); - if (smi_sts & (1 << 11)) printk(BIOS_DEBUG, "MCSMI "); - if (smi_sts & (1 << 10)) printk(BIOS_DEBUG, "GPI "); - if (smi_sts & (1 << 9)) printk(BIOS_DEBUG, "GPE0 "); - if (smi_sts & (1 << 8)) printk(BIOS_DEBUG, "PM1 "); - if (smi_sts & (1 << 6)) printk(BIOS_DEBUG, "SWSMI_TMR "); - if (smi_sts & (1 << 5)) printk(BIOS_DEBUG, "APM "); - if (smi_sts & (1 << 4)) printk(BIOS_DEBUG, "SLP_SMI "); - if (smi_sts & (1 << 3)) printk(BIOS_DEBUG, "LEGACY_USB "); - if (smi_sts & (1 << 2)) printk(BIOS_DEBUG, "BIOS "); - printk(BIOS_DEBUG, "\n"); -} - - -/** - * @brief read and clear GPE0_STS - * @return GPE0_STS register - */ -static u32 reset_gpe0_status(void) -{ - u32 reg32; - - reg32 = inl(pmbase + GPE0_STS); - /* set status bits are cleared by writing 1 to them */ - outl(reg32, pmbase + GPE0_STS); - - return reg32; -} - -static void dump_gpe0_status(u32 gpe0_sts) -{ - int i; - printk(BIOS_DEBUG, "GPE0_STS: "); - for (i=31; i>= 16; i--) { - if (gpe0_sts & (1 << i)) printk(BIOS_DEBUG, "GPIO%d ", (i-16)); - } - if (gpe0_sts & (1 << 14)) printk(BIOS_DEBUG, "USB4 "); - if (gpe0_sts & (1 << 13)) printk(BIOS_DEBUG, "PME_B0 "); - if (gpe0_sts & (1 << 12)) printk(BIOS_DEBUG, "USB3 "); - if (gpe0_sts & (1 << 11)) printk(BIOS_DEBUG, "PME "); - if (gpe0_sts & (1 << 10)) printk(BIOS_DEBUG, "BATLOW "); - if (gpe0_sts & (1 << 9)) printk(BIOS_DEBUG, "PCI_EXP "); - if (gpe0_sts & (1 << 8)) printk(BIOS_DEBUG, "RI "); - if (gpe0_sts & (1 << 7)) printk(BIOS_DEBUG, "SMB_WAK "); - if (gpe0_sts & (1 << 6)) printk(BIOS_DEBUG, "TCO_SCI "); - if (gpe0_sts & (1 << 5)) printk(BIOS_DEBUG, "AC97 "); - if (gpe0_sts & (1 << 4)) printk(BIOS_DEBUG, "USB2 "); - if (gpe0_sts & (1 << 3)) printk(BIOS_DEBUG, "USB1 "); - if (gpe0_sts & (1 << 2)) printk(BIOS_DEBUG, "SWGPE "); - if (gpe0_sts & (1 << 1)) printk(BIOS_DEBUG, "HOTPLUG "); - if (gpe0_sts & (1 << 0)) printk(BIOS_DEBUG, "THRM "); - printk(BIOS_DEBUG, "\n"); -} - - -/** - * @brief read and clear TCOx_STS - * @return TCOx_STS registers - */ -static u32 reset_tco_status(void) -{ - u32 tcobase = pmbase + 0x60; - u32 reg32; - - reg32 = inl(tcobase + 0x04); - /* set status bits are cleared by writing 1 to them */ - outl(reg32 & ~(1 << 18), tcobase + 0x04); // Don't clear BOOT_STS before SECOND_TO_STS - if (reg32 & (1 << 18)) - outl(reg32 & (1 << 18), tcobase + 0x04); // clear BOOT_STS - - return reg32; -} - - -static void dump_tco_status(u32 tco_sts) -{ - printk(BIOS_DEBUG, "TCO_STS: "); - if (tco_sts & (1 << 20)) printk(BIOS_DEBUG, "SMLINK_SLV "); - if (tco_sts & (1 << 18)) printk(BIOS_DEBUG, "BOOT "); - if (tco_sts & (1 << 17)) printk(BIOS_DEBUG, "SECOND_TO "); - if (tco_sts & (1 << 16)) printk(BIOS_DEBUG, "INTRD_DET "); - if (tco_sts & (1 << 12)) printk(BIOS_DEBUG, "DMISERR "); - if (tco_sts & (1 << 10)) printk(BIOS_DEBUG, "DMISMI "); - if (tco_sts & (1 << 9)) printk(BIOS_DEBUG, "DMISCI "); - if (tco_sts & (1 << 8)) printk(BIOS_DEBUG, "BIOSWR "); - if (tco_sts & (1 << 7)) printk(BIOS_DEBUG, "NEWCENTURY "); - if (tco_sts & (1 << 3)) printk(BIOS_DEBUG, "TIMEOUT "); - if (tco_sts & (1 << 2)) printk(BIOS_DEBUG, "TCO_INT "); - if (tco_sts & (1 << 1)) printk(BIOS_DEBUG, "SW_TCO "); - if (tco_sts & (1 << 0)) printk(BIOS_DEBUG, "NMI2SMI "); - printk(BIOS_DEBUG, "\n"); -} - int southbridge_io_trap_handler(int smif) { switch (smif) { @@ -256,53 +63,6 @@ int southbridge_io_trap_handler(int smif) return 0; } -/** - * @brief Set the EOS bit - */ -void southbridge_smi_set_eos(void) -{ - u8 reg8; - - reg8 = inb(pmbase + SMI_EN); - reg8 |= EOS; - outb(reg8, pmbase + SMI_EN); -} - -static void busmaster_disable_on_bus(int bus) -{ - int slot, func; - unsigned int val; - unsigned char hdr; - - for (slot = 0; slot < 0x20; slot++) { - for (func = 0; func < 8; func++) { - u32 reg32; - pci_devfn_t dev = PCI_DEV(bus, slot, func); - - val = pci_read_config32(dev, PCI_VENDOR_ID); - - if (val == 0xffffffff || val == 0x00000000 || - val == 0x0000ffff || val == 0xffff0000) - continue; - - /* Disable Bus Mastering for this one device */ - reg32 = pci_read_config32(dev, PCI_COMMAND); - reg32 &= ~PCI_COMMAND_MASTER; - pci_write_config32(dev, PCI_COMMAND, reg32); - - /* If this is a bridge, then follow it. */ - hdr = pci_read_config8(dev, PCI_HEADER_TYPE); - hdr &= 0x7f; - if (hdr == PCI_HEADER_TYPE_BRIDGE || - hdr == PCI_HEADER_TYPE_CARDBUS) { - unsigned int buses; - buses = pci_read_config32(dev, PCI_PRIMARY_BUS); - busmaster_disable_on_bus((buses >> 8) & 0xff); - } - } - } -} - static void southbridge_gate_memory_reset_real(int offset, u16 use, u16 io, u16 lvl) { @@ -334,7 +94,7 @@ static void southbridge_gate_memory_reset_real(int offset, * Intel reference designs all use GPIO 60 but it is * not a requirement and boards could use a different pin. */ -static void southbridge_gate_memory_reset(void) +void southbridge_gate_memory_reset(void) { u16 gpiobase; @@ -354,377 +114,7 @@ static void southbridge_gate_memory_reset(void) gpiobase + GP_LVL); } -static void xhci_sleep(u8 slp_typ) -{ - u32 reg32, xhci_bar; - u16 reg16; - - switch (slp_typ) { - case ACPI_S3: - case ACPI_S4: - reg16 = pci_read_config16(PCH_XHCI_DEV, 0x74); - reg16 &= ~0x03UL; - pci_write_config32(PCH_XHCI_DEV, 0x74, reg16); - - reg32 = pci_read_config32(PCH_XHCI_DEV, PCI_COMMAND); - reg32 |= (PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY); - pci_write_config32(PCH_XHCI_DEV, PCI_COMMAND, reg32); - - xhci_bar = pci_read_config32(PCH_XHCI_DEV, - PCI_BASE_ADDRESS_0) & ~0xFUL; - - if ((xhci_bar + 0x4C0) & 1) - pch_iobp_update(0xEC000082, ~0UL, (3 << 2)); - if ((xhci_bar + 0x4D0) & 1) - pch_iobp_update(0xEC000182, ~0UL, (3 << 2)); - if ((xhci_bar + 0x4E0) & 1) - pch_iobp_update(0xEC000282, ~0UL, (3 << 2)); - if ((xhci_bar + 0x4F0) & 1) - pch_iobp_update(0xEC000382, ~0UL, (3 << 2)); - - reg32 = pci_read_config32(PCH_XHCI_DEV, PCI_COMMAND); - reg32 &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY); - pci_write_config32(PCH_XHCI_DEV, PCI_COMMAND, reg32); - - reg16 = pci_read_config16(PCH_XHCI_DEV, 0x74); - reg16 |= 0x03; - pci_write_config16(PCH_XHCI_DEV, 0x74, reg16); - break; - - case ACPI_S5: - reg16 = pci_read_config16(PCH_XHCI_DEV, 0x74); - reg16 |= ((1 << 8) | 0x03); - pci_write_config16(PCH_XHCI_DEV, 0x74, reg16); - break; - } -} - -static void southbridge_smi_sleep(void) -{ - u8 reg8; - u32 reg32; - u8 slp_typ; - u8 s5pwr = CONFIG_MAINBOARD_POWER_FAILURE_STATE; - - // save and recover RTC port values - u8 tmp70, tmp72; - tmp70 = inb(0x70); - tmp72 = inb(0x72); - get_option(&s5pwr, "power_on_after_fail"); - outb(tmp70, 0x70); - outb(tmp72, 0x72); - - /* First, disable further SMIs */ - reg8 = inb(pmbase + SMI_EN); - reg8 &= ~SLP_SMI_EN; - outb(reg8, pmbase + SMI_EN); - - /* Figure out SLP_TYP */ - reg32 = inl(pmbase + PM1_CNT); - printk(BIOS_SPEW, "SMI#: SLP = 0x%08x\n", reg32); - slp_typ = acpi_sleep_from_pm1(reg32); - - if (smm_get_gnvs()->xhci) - xhci_sleep(slp_typ); - - /* Do any mainboard sleep handling */ - mainboard_smi_sleep(slp_typ); - -#if CONFIG(ELOG_GSMI) - /* Log S3, S4, and S5 entry */ - if (slp_typ >= ACPI_S3) - elog_add_event_byte(ELOG_TYPE_ACPI_ENTER, slp_typ); -#endif - - /* Next, do the deed. - */ - - switch (slp_typ) { - case ACPI_S0: printk(BIOS_DEBUG, "SMI#: Entering S0 (On)\n"); break; - case ACPI_S1: printk(BIOS_DEBUG, "SMI#: Entering S1 (Assert STPCLK#)\n"); break; - case ACPI_S3: - printk(BIOS_DEBUG, "SMI#: Entering S3 (Suspend-To-RAM)\n"); - - /* Gate memory reset */ - southbridge_gate_memory_reset(); - - /* Invalidate the cache before going to S3 */ - wbinvd(); - break; - case ACPI_S4: printk(BIOS_DEBUG, "SMI#: Entering S4 (Suspend-To-Disk)\n"); break; - case ACPI_S5: - printk(BIOS_DEBUG, "SMI#: Entering S5 (Soft Power off)\n"); - - outl(0, pmbase + GPE0_EN); - - /* Always set the flag in case CMOS was changed on runtime. For - * "KEEP", switch to "OFF" - KEEP is software emulated - */ - reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), GEN_PMCON_3); - if (s5pwr == MAINBOARD_POWER_ON) { - reg8 &= ~1; - } else { - reg8 |= 1; - } - pci_write_config8(PCI_DEV(0, 0x1f, 0), GEN_PMCON_3, reg8); - - /* also iterates over all bridges on bus 0 */ - busmaster_disable_on_bus(0); - break; - default: printk(BIOS_DEBUG, "SMI#: ERROR: SLP_TYP reserved\n"); break; - } - - /* Write back to the SLP register to cause the originally intended - * event again. We need to set BIT13 (SLP_EN) though to make the - * sleep happen. - */ - outl(reg32 | SLP_EN, pmbase + PM1_CNT); - - /* Make sure to stop executing code here for S3/S4/S5 */ - if (slp_typ >= ACPI_S3) - halt(); - - /* In most sleep states, the code flow of this function ends at - * the line above. However, if we entered sleep state S1 and wake - * up again, we will continue to execute code in this function. - */ - reg32 = inl(pmbase + PM1_CNT); - if (reg32 & SCI_EN) { - /* The OS is not an ACPI OS, so we set the state to S0 */ - reg32 &= ~(SLP_EN | SLP_TYP); - outl(reg32, pmbase + PM1_CNT); - } -} - -/* - * Look for Synchronous IO SMI and use save state from that - * core in case we are not running on the same core that - * initiated the IO transaction. - */ -static em64t101_smm_state_save_area_t *smi_apmc_find_state_save(u8 cmd) -{ - em64t101_smm_state_save_area_t *state; - int node; - - /* Check all nodes looking for the one that issued the IO */ - for (node = 0; node < CONFIG_MAX_CPUS; node++) { - state = smm_get_save_state(node); - - /* Check for Synchronous IO (bit0 == 1) */ - if (!(state->io_misc_info & (1 << 0))) - continue; - - /* Make sure it was a write (bit4 == 0) */ - if (state->io_misc_info & (1 << 4)) - continue; - - /* Check for APMC IO port */ - if (((state->io_misc_info >> 16) & 0xff) != APM_CNT) - continue; - - /* Check AX against the requested command */ - if ((state->rax & 0xff) != cmd) - continue; - - return state; - } - - return NULL; -} - -#if CONFIG(ELOG_GSMI) -static void southbridge_smi_gsmi(void) -{ - u32 *ret, *param; - u8 sub_command; - em64t101_smm_state_save_area_t *io_smi = - smi_apmc_find_state_save(APM_CNT_ELOG_GSMI); - - if (!io_smi) - return; - - /* Command and return value in EAX */ - ret = (u32*)&io_smi->rax; - sub_command = (u8)(*ret >> 8); - - /* Parameter buffer in EBX */ - param = (u32*)&io_smi->rbx; - - /* drivers/elog/gsmi.c */ - *ret = gsmi_exec(sub_command, param); -} -#endif - -static void southbridge_smi_apmc(void) -{ - u32 pmctrl; - u8 reg8; - em64t101_smm_state_save_area_t *state; - - /* Emulate B2 register as the FADT / Linux expects it */ - - reg8 = inb(APM_CNT); - switch (reg8) { - case APM_CNT_CST_CONTROL: - /* Calling this function seems to cause - * some kind of race condition in Linux - * and causes a kernel oops - */ - printk(BIOS_DEBUG, "C-state control\n"); - break; - case APM_CNT_PST_CONTROL: - /* Calling this function seems to cause - * some kind of race condition in Linux - * and causes a kernel oops - */ - printk(BIOS_DEBUG, "P-state control\n"); - break; - case APM_CNT_ACPI_DISABLE: - pmctrl = inl(pmbase + PM1_CNT); - pmctrl &= ~SCI_EN; - outl(pmctrl, pmbase + PM1_CNT); - printk(BIOS_DEBUG, "SMI#: ACPI disabled.\n"); - break; - case APM_CNT_ACPI_ENABLE: - pmctrl = inl(pmbase + PM1_CNT); - pmctrl |= SCI_EN; - outl(pmctrl, pmbase + PM1_CNT); - printk(BIOS_DEBUG, "SMI#: ACPI enabled.\n"); - break; - case APM_CNT_GNVS_UPDATE: - if (smm_initialized) { - printk(BIOS_DEBUG, "SMI#: SMM structures already initialized!\n"); - return; - } - state = smi_apmc_find_state_save(reg8); - if (state) { - /* EBX in the state save contains the GNVS pointer */ - gnvs = (global_nvs_t *)((u32)state->rbx); - smm_initialized = 1; - printk(BIOS_DEBUG, "SMI#: Setting GNVS to %p\n", gnvs); - } - break; -#if CONFIG(ELOG_GSMI) - case APM_CNT_ELOG_GSMI: - southbridge_smi_gsmi(); - break; -#endif - } - - mainboard_smi_apmc(reg8); -} - -static void southbridge_smi_pm1(void) -{ - u16 pm1_sts; - - pm1_sts = reset_pm1_status(); - dump_pm1_status(pm1_sts); - - /* While OSPM is not active, poweroff immediately - * on a power button event. - */ - if (pm1_sts & PWRBTN_STS) { - // power button pressed - u32 reg32; - reg32 = (7 << 10) | (1 << 13); -#if CONFIG(ELOG_GSMI) - elog_add_event(ELOG_TYPE_POWER_BUTTON); -#endif - outl(reg32, pmbase + PM1_CNT); - } -} - -static void southbridge_smi_gpe0(void) -{ - u32 gpe0_sts; - - gpe0_sts = reset_gpe0_status(); - dump_gpe0_status(gpe0_sts); -} - -static void southbridge_smi_gpi(void) -{ - u16 reg16; - reg16 = inw(pmbase + ALT_GP_SMI_STS); - outw(reg16, pmbase + ALT_GP_SMI_STS); - - reg16 &= inw(pmbase + ALT_GP_SMI_EN); - - mainboard_smi_gpi(reg16); - - if (reg16) - printk(BIOS_DEBUG, "GPI (mask %04x)\n",reg16); - - outw(reg16, pmbase + ALT_GP_SMI_STS); -} - -static void southbridge_smi_mc(void) -{ - u32 reg32; - - reg32 = inl(pmbase + SMI_EN); - - /* Are periodic SMIs enabled? */ - if ((reg32 & MCSMI_EN) == 0) - return; - - printk(BIOS_DEBUG, "Microcontroller SMI.\n"); -} - - - -static void southbridge_smi_tco(void) -{ - u32 tco_sts; - - tco_sts = reset_tco_status(); - - /* Any TCO event? */ - if (!tco_sts) - return; - - if (tco_sts & (1 << 8)) { // BIOSWR - u8 bios_cntl; - - bios_cntl = pci_read_config16(PCI_DEV(0, 0x1f, 0), 0xdc); - - if (bios_cntl & 1) { - /* BWE is RW, so the SMI was caused by a - * write to BWE, not by a write to the BIOS - */ - - /* This is the place where we notice someone - * is trying to tinker with the BIOS. We are - * trying to be nice and just ignore it. A more - * resolute answer would be to power down the - * box. - */ - printk(BIOS_DEBUG, "Switching back to RO\n"); - pci_write_config32(PCI_DEV(0, 0x1f, 0), 0xdc, (bios_cntl & ~1)); - } /* No else for now? */ - } else if (tco_sts & (1 << 3)) { /* TIMEOUT */ - /* Handle TCO timeout */ - printk(BIOS_DEBUG, "TCO Timeout.\n"); - } else { - dump_tco_status(tco_sts); - } -} - -static void southbridge_smi_periodic(void) -{ - u32 reg32; - - reg32 = inl(pmbase + SMI_EN); - - /* Are periodic SMIs enabled? */ - if ((reg32 & PERIODIC_EN) == 0) - return; - - printk(BIOS_DEBUG, "Periodic SMI.\n"); -} - -static void southbridge_smi_monitor(void) +void southbridge_smi_monitor(void) { #define IOTRAP(x) (trap_sts & (1 << x)) u32 trap_sts, trap_cycle; @@ -778,76 +168,18 @@ static void southbridge_smi_monitor(void) #undef IOTRAP } -typedef void (*smi_handler_t)(void); - -static smi_handler_t southbridge_smi[32] = { - NULL, // [0] reserved - NULL, // [1] reserved - NULL, // [2] BIOS_STS - NULL, // [3] LEGACY_USB_STS - southbridge_smi_sleep, // [4] SLP_SMI_STS - southbridge_smi_apmc, // [5] APM_STS - NULL, // [6] SWSMI_TMR_STS - NULL, // [7] reserved - southbridge_smi_pm1, // [8] PM1_STS - southbridge_smi_gpe0, // [9] GPE0_STS - southbridge_smi_gpi, // [10] GPI_STS - southbridge_smi_mc, // [11] MCSMI_STS - NULL, // [12] DEVMON_STS - southbridge_smi_tco, // [13] TCO_STS - southbridge_smi_periodic, // [14] PERIODIC_STS - NULL, // [15] SERIRQ_SMI_STS - NULL, // [16] SMBUS_SMI_STS - NULL, // [17] LEGACY_USB2_STS - NULL, // [18] INTEL_USB2_STS - NULL, // [19] reserved - NULL, // [20] PCI_EXP_SMI_STS - southbridge_smi_monitor, // [21] MONITOR_STS - NULL, // [22] reserved - NULL, // [23] reserved - NULL, // [24] reserved - NULL, // [25] EL_SMI_STS - NULL, // [26] SPI_STS - NULL, // [27] reserved - NULL, // [28] reserved - NULL, // [29] reserved - NULL, // [30] reserved - NULL // [31] reserved -}; - -/** - * @brief Interrupt handler for SMI# - * @param node - * @param state_save - */ -void southbridge_smi_handler(void) +void southbridge_update_gnvs(u8 apm_cnt, int *smm_done) { - int i, dump = 0; - u32 smi_sts; - - /* Update global variable pmbase */ - pmbase = lpc_get_pmbase(); - - /* We need to clear the SMI status registers, or we won't see what's - * happening in the following calls. - */ - smi_sts = reset_smi_status(); - - /* Call SMI sub handler for each of the status bits */ - for (i = 0; i < 31; i++) { - if (smi_sts & (1 << i)) { - if (southbridge_smi[i]) { - southbridge_smi[i](); - } else { - printk(BIOS_DEBUG, "SMI_STS[%d] occurred, but no " - "handler available.\n", i); - dump = 1; - } - } - } - - if (dump) { - dump_smi_status(smi_sts); + em64t101_smm_state_save_area_t *state = + smi_apmc_find_state_save(apm_cnt); + if (state) { + /* EBX in the state save contains the GNVS pointer */ + gnvs = (global_nvs_t *)((u32)state->rbx); + *smm_done = 1; + printk(BIOS_DEBUG, "SMI#: Setting GNVS to %p\n", gnvs); } +} +void southbridge_finalize_all(void) +{ } -- cgit v1.2.3