From 2e29c3b0d5168fdc96c3d85c9b54b5a01c950261 Mon Sep 17 00:00:00 2001 From: Angel Pons Date: Mon, 10 Aug 2020 15:47:28 +0200 Subject: sb/intel/bd82x6x: Factor out common ME functions MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We can now factor out the essentially duplicated ME functions. We include a .c file to preserve reproducibility. This is needed because there are two different `mei_base_address` global variables, and we have to access the same variables in order for builds to be reproducible. The duplicate global in `me.c` and `me_8.x.c` will be completely gone once this new `me_common.c` file becomes a standalone compilation unit. We are wrapping some things in static inline functions, as they won't be directly accessible anymore after moving to a separate compilation unit. Tested with BUILD_TIMELESS=1, Asus P8Z77-V LX2 remains identical. Change-Id: I057809aa039d70c4b5fa9c24fbd26c8f52aca736 Signed-off-by: Angel Pons Reviewed-on: https://review.coreboot.org/c/coreboot/+/42012 Tested-by: build bot (Jenkins) Reviewed-by: Arthur Heymans Reviewed-by: Michael Niewöhner --- src/southbridge/intel/bd82x6x/me.c | 388 +-------------------------- src/southbridge/intel/bd82x6x/me_8.x.c | 392 +--------------------------- src/southbridge/intel/bd82x6x/me_common.c | 419 ++++++++++++++++++++++++++++++ 3 files changed, 429 insertions(+), 770 deletions(-) create mode 100644 src/southbridge/intel/bd82x6x/me_common.c (limited to 'src/southbridge') diff --git a/src/southbridge/intel/bd82x6x/me.c b/src/southbridge/intel/bd82x6x/me.c index 1c56e5ebd0..3a1ba55cec 100644 --- a/src/southbridge/intel/bd82x6x/me.c +++ b/src/southbridge/intel/bd82x6x/me.c @@ -27,304 +27,8 @@ #include #endif -/* Path that the BIOS should take based on ME state */ -static const char *me_bios_path_values[] __unused = { - [ME_NORMAL_BIOS_PATH] = "Normal", - [ME_S3WAKE_BIOS_PATH] = "S3 Wake", - [ME_ERROR_BIOS_PATH] = "Error", - [ME_RECOVERY_BIOS_PATH] = "Recovery", - [ME_DISABLE_BIOS_PATH] = "Disable", - [ME_FIRMWARE_UPDATE_BIOS_PATH] = "Firmware Update", -}; - -/* MMIO base address for MEI interface */ -static u32 *mei_base_address; - -static void mei_dump(void *ptr, int dword, int offset, const char *type) -{ - struct mei_csr *csr; - - if (!CONFIG(DEBUG_INTEL_ME)) - return; - - printk(BIOS_SPEW, "%-9s[%02x] : ", type, offset); - - switch (offset) { - case MEI_H_CSR: - case MEI_ME_CSR_HA: - csr = ptr; - if (!csr) { - printk(BIOS_SPEW, "ERROR: 0x%08x\n", dword); - break; - } - printk(BIOS_SPEW, "cbd=%u cbrp=%02u cbwp=%02u ready=%u " - "reset=%u ig=%u is=%u ie=%u\n", csr->buffer_depth, - csr->buffer_read_ptr, csr->buffer_write_ptr, - csr->ready, csr->reset, csr->interrupt_generate, - csr->interrupt_status, csr->interrupt_enable); - break; - case MEI_ME_CB_RW: - case MEI_H_CB_WW: - printk(BIOS_SPEW, "CB: 0x%08x\n", dword); - break; - default: - printk(BIOS_SPEW, "0x%08x\n", offset); - break; - } -} - -/* - * ME/MEI access helpers using memcpy to avoid aliasing. - */ - -static inline void mei_read_dword_ptr(void *ptr, int offset) -{ - u32 dword = read32(mei_base_address + (offset/sizeof(u32))); - memcpy(ptr, &dword, sizeof(dword)); - mei_dump(ptr, dword, offset, "READ"); -} - -static inline void mei_write_dword_ptr(void *ptr, int offset) -{ - u32 dword = 0; - memcpy(&dword, ptr, sizeof(dword)); - write32(mei_base_address + (offset/sizeof(u32)), dword); - mei_dump(ptr, dword, offset, "WRITE"); -} - -#ifndef __SIMPLE_DEVICE__ -static inline void pci_read_dword_ptr(struct device *dev, void *ptr, int offset) -{ - u32 dword = pci_read_config32(dev, offset); - memcpy(ptr, &dword, sizeof(dword)); - mei_dump(ptr, dword, offset, "PCI READ"); -} -#endif - -static inline void read_host_csr(struct mei_csr *csr) -{ - mei_read_dword_ptr(csr, MEI_H_CSR); -} - -static inline void write_host_csr(struct mei_csr *csr) -{ - mei_write_dword_ptr(csr, MEI_H_CSR); -} - -static inline void read_me_csr(struct mei_csr *csr) -{ - mei_read_dword_ptr(csr, MEI_ME_CSR_HA); -} - -static inline void write_cb(u32 dword) -{ - write32(mei_base_address + (MEI_H_CB_WW/sizeof(u32)), dword); - mei_dump(NULL, dword, MEI_H_CB_WW, "WRITE"); -} - -static inline u32 read_cb(void) -{ - u32 dword = read32(mei_base_address + (MEI_ME_CB_RW/sizeof(u32))); - mei_dump(NULL, dword, MEI_ME_CB_RW, "READ"); - return dword; -} - -/* Wait for ME ready bit to be asserted */ -static int mei_wait_for_me_ready(void) -{ - struct mei_csr me; - unsigned int try = ME_RETRY; - - while (try--) { - read_me_csr(&me); - if (me.ready) - return 0; - udelay(ME_DELAY); - } - - printk(BIOS_ERR, "ME: failed to become ready\n"); - return -1; -} - -static void mei_reset(void) -{ - struct mei_csr host; - - if (mei_wait_for_me_ready() < 0) - return; - - /* Reset host and ME circular buffers for next message */ - read_host_csr(&host); - host.reset = 1; - host.interrupt_generate = 1; - write_host_csr(&host); - - if (mei_wait_for_me_ready() < 0) - return; - - /* Re-init and indicate host is ready */ - read_host_csr(&host); - host.interrupt_generate = 1; - host.ready = 1; - host.reset = 0; - write_host_csr(&host); -} - -static int mei_send_msg(struct mei_header *mei, struct mkhi_header *mkhi, - void *req_data) -{ - struct mei_csr host; - unsigned int ndata, n; - u32 *data; - - /* Number of dwords to write, ignoring MKHI */ - ndata = mei->length >> 2; - - /* Pad non-dword aligned request message length */ - if (mei->length & 3) - ndata++; - if (!ndata) { - printk(BIOS_DEBUG, "ME: request does not include MKHI\n"); - return -1; - } - ndata++; /* Add MEI header */ - - /* - * Make sure there is still room left in the circular buffer. - * Reset the buffer pointers if the requested message will not fit. - */ - read_host_csr(&host); - if ((host.buffer_depth - host.buffer_write_ptr) < ndata) { - printk(BIOS_ERR, "ME: circular buffer full, resetting...\n"); - mei_reset(); - read_host_csr(&host); - } - - /* - * This implementation does not handle splitting large messages - * across multiple transactions. Ensure the requested length - * will fit in the available circular buffer depth. - */ - if ((host.buffer_depth - host.buffer_write_ptr) < ndata) { - printk(BIOS_ERR, "ME: message (%u) too large for buffer (%u)\n", - ndata + 2, host.buffer_depth); - return -1; - } - - /* Write MEI header */ - mei_write_dword_ptr(mei, MEI_H_CB_WW); - ndata--; - - /* Write MKHI header */ - mei_write_dword_ptr(mkhi, MEI_H_CB_WW); - ndata--; - - /* Write message data */ - data = req_data; - for (n = 0; n < ndata; ++n) - write_cb(*data++); - - /* Generate interrupt to the ME */ - read_host_csr(&host); - host.interrupt_generate = 1; - write_host_csr(&host); - - /* Make sure ME is ready after sending request data */ - return mei_wait_for_me_ready(); -} - -static int mei_recv_msg(struct mkhi_header *mkhi, void *rsp_data, int rsp_bytes) -{ - struct mei_header mei_rsp; - struct mkhi_header mkhi_rsp; - struct mei_csr me, host; - unsigned int ndata, n; - unsigned int expected; - u32 *data; - - /* Total number of dwords to read from circular buffer */ - expected = (rsp_bytes + sizeof(mei_rsp) + sizeof(mkhi_rsp)) >> 2; - if (rsp_bytes & 3) - expected++; - - /* - * The interrupt status bit does not appear to indicate that the - * message has actually been received. Instead we wait until the - * expected number of dwords are present in the circular buffer. - */ - for (n = ME_RETRY; n; --n) { - read_me_csr(&me); - if ((me.buffer_write_ptr - me.buffer_read_ptr) >= expected) - break; - udelay(ME_DELAY); - } - if (!n) { - printk(BIOS_ERR, "ME: timeout waiting for data: expected " - "%u, available %u\n", expected, - me.buffer_write_ptr - me.buffer_read_ptr); - return -1; - } - - /* Read and verify MEI response header from the ME */ - mei_read_dword_ptr(&mei_rsp, MEI_ME_CB_RW); - if (!mei_rsp.is_complete) { - printk(BIOS_ERR, "ME: response is not complete\n"); - return -1; - } - - /* Handle non-dword responses and expect at least MKHI header */ - ndata = mei_rsp.length >> 2; - if (mei_rsp.length & 3) - ndata++; - if (ndata != (expected - 1)) { - printk(BIOS_ERR, "ME: response is missing data %d != %d\n", - ndata, (expected - 1)); - return -1; - } - - /* Read and verify MKHI response header from the ME */ - mei_read_dword_ptr(&mkhi_rsp, MEI_ME_CB_RW); - if (!mkhi_rsp.is_response || - mkhi->group_id != mkhi_rsp.group_id || - mkhi->command != mkhi_rsp.command) { - printk(BIOS_ERR, "ME: invalid response, group %u ?= %u, " - "command %u ?= %u, is_response %u\n", mkhi->group_id, - mkhi_rsp.group_id, mkhi->command, mkhi_rsp.command, - mkhi_rsp.is_response); - return -1; - } - ndata--; /* MKHI header has been read */ - - /* Make sure caller passed a buffer with enough space */ - if (ndata != (rsp_bytes >> 2)) { - printk(BIOS_ERR, "ME: not enough room in response buffer: " - "%u != %u\n", ndata, rsp_bytes >> 2); - return -1; - } - - /* Read response data from the circular buffer */ - data = rsp_data; - for (n = 0; n < ndata; ++n) - *data++ = read_cb(); - - /* Tell the ME that we have consumed the response */ - read_host_csr(&host); - host.interrupt_status = 1; - host.interrupt_generate = 1; - write_host_csr(&host); - - return mei_wait_for_me_ready(); -} - -static inline int mei_sendrecv(struct mei_header *mei, struct mkhi_header *mkhi, - void *req_data, void *rsp_data, int rsp_bytes) -{ - if (mei_send_msg(mei, mkhi, req_data) < 0) - return -1; - if (mei_recv_msg(mkhi, rsp_data, rsp_bytes) < 0) - return -1; - return 0; -} +/* FIXME: For verification purposes only */ +#include "me_common.c" /* Send END OF POST message to the ME */ static int __unused mkhi_end_of_post(void) @@ -438,11 +142,10 @@ static void intel_me7_finalize_smm(void) struct me_hfs hfs; u32 reg32; - mei_base_address = (u32 *) - (pci_read_config32(PCH_ME_DEV, PCI_BASE_ADDRESS_0) & ~0xf); + update_mei_base_address(); /* S3 path will have hidden this device already */ - if (!mei_base_address || mei_base_address == (u32 *)0xfffffff0) + if (!is_mei_base_address_valid()) return; /* Make sure ME is in a mode that expects EOP */ @@ -548,94 +251,13 @@ static me_bios_path intel_me_path(struct device *dev) return path; } -/* Prepare ME for MEI messages */ -static int intel_mei_setup(struct device *dev) -{ - struct resource *res; - struct mei_csr host; - - /* Find the MMIO base for the ME interface */ - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (!res || res->base == 0 || res->size == 0) { - printk(BIOS_DEBUG, "ME: MEI resource not present!\n"); - return -1; - } - mei_base_address = (u32 *)(uintptr_t)res->base; - - /* Ensure Memory and Bus Master bits are set */ - pci_or_config16(dev, PCI_COMMAND, PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY); - - /* Clean up status for next message */ - read_host_csr(&host); - host.interrupt_generate = 1; - host.ready = 1; - host.reset = 0; - write_host_csr(&host); - - return 0; -} - -/* Read the Extend register hash of ME firmware */ -static int intel_me_extend_valid(struct device *dev) -{ - struct me_heres status; - u32 extend[8] = {0}; - int i, count = 0; - - pci_read_dword_ptr(dev, &status, PCI_ME_HERES); - if (!status.extend_feature_present) { - printk(BIOS_ERR, "ME: Extend Feature not present\n"); - return -1; - } - - if (!status.extend_reg_valid) { - printk(BIOS_ERR, "ME: Extend Register not valid\n"); - return -1; - } - - switch (status.extend_reg_algorithm) { - case PCI_ME_EXT_SHA1: - count = 5; - printk(BIOS_DEBUG, "ME: Extend SHA-1: "); - break; - case PCI_ME_EXT_SHA256: - count = 8; - printk(BIOS_DEBUG, "ME: Extend SHA-256: "); - break; - default: - printk(BIOS_ERR, "ME: Extend Algorithm %d unknown\n", - status.extend_reg_algorithm); - return -1; - } - - for (i = 0; i < count; ++i) { - extend[i] = pci_read_config32(dev, PCI_ME_HER(i)); - printk(BIOS_DEBUG, "%08x", extend[i]); - } - printk(BIOS_DEBUG, "\n"); - -#if CONFIG(CHROMEOS) - /* Save hash in NVS for the OS to verify */ - chromeos_set_me_hash(extend, count); -#endif - - return 0; -} - -/* Hide the ME virtual PCI devices */ -static void intel_me_hide(struct device *dev) -{ - dev->enabled = 0; - pch_enable(dev); -} - /* Check whether ME is present and do basic init */ static void intel_me_init(struct device *dev) { me_bios_path path = intel_me_path(dev); /* Do initial setup and determine the BIOS path */ - printk(BIOS_NOTICE, "ME: BIOS path: %s\n", me_bios_path_values[path]); + printk(BIOS_NOTICE, "ME: BIOS path: %s\n", me_get_bios_path_string(path)); switch (path) { case ME_S3WAKE_BIOS_PATH: diff --git a/src/southbridge/intel/bd82x6x/me_8.x.c b/src/southbridge/intel/bd82x6x/me_8.x.c index 88792baf00..4d232ede9c 100644 --- a/src/southbridge/intel/bd82x6x/me_8.x.c +++ b/src/southbridge/intel/bd82x6x/me_8.x.c @@ -27,304 +27,8 @@ #include #endif -/* Path that the BIOS should take based on ME state */ -static const char *me_bios_path_values[] __unused = { - [ME_NORMAL_BIOS_PATH] = "Normal", - [ME_S3WAKE_BIOS_PATH] = "S3 Wake", - [ME_ERROR_BIOS_PATH] = "Error", - [ME_RECOVERY_BIOS_PATH] = "Recovery", - [ME_DISABLE_BIOS_PATH] = "Disable", - [ME_FIRMWARE_UPDATE_BIOS_PATH] = "Firmware Update", -}; - -/* MMIO base address for MEI interface */ -static u32 *mei_base_address; - -static void mei_dump(void *ptr, int dword, int offset, const char *type) -{ - struct mei_csr *csr; - - if (!CONFIG(DEBUG_INTEL_ME)) - return; - - printk(BIOS_SPEW, "%-9s[%02x] : ", type, offset); - - switch (offset) { - case MEI_H_CSR: - case MEI_ME_CSR_HA: - csr = ptr; - if (!csr) { - printk(BIOS_SPEW, "ERROR: 0x%08x\n", dword); - break; - } - printk(BIOS_SPEW, "cbd=%u cbrp=%02u cbwp=%02u ready=%u " - "reset=%u ig=%u is=%u ie=%u\n", csr->buffer_depth, - csr->buffer_read_ptr, csr->buffer_write_ptr, - csr->ready, csr->reset, csr->interrupt_generate, - csr->interrupt_status, csr->interrupt_enable); - break; - case MEI_ME_CB_RW: - case MEI_H_CB_WW: - printk(BIOS_SPEW, "CB: 0x%08x\n", dword); - break; - default: - printk(BIOS_SPEW, "0x%08x\n", offset); - break; - } -} - -/* - * ME/MEI access helpers using memcpy to avoid aliasing. - */ - -static inline void mei_read_dword_ptr(void *ptr, int offset) -{ - u32 dword = read32(mei_base_address + (offset/sizeof(u32))); - memcpy(ptr, &dword, sizeof(dword)); - mei_dump(ptr, dword, offset, "READ"); -} - -static inline void mei_write_dword_ptr(void *ptr, int offset) -{ - u32 dword = 0; - memcpy(&dword, ptr, sizeof(dword)); - write32(mei_base_address + (offset/sizeof(u32)), dword); - mei_dump(ptr, dword, offset, "WRITE"); -} - -#ifndef __SIMPLE_DEVICE__ -static inline void pci_read_dword_ptr(struct device *dev, void *ptr, int offset) -{ - u32 dword = pci_read_config32(dev, offset); - memcpy(ptr, &dword, sizeof(dword)); - mei_dump(ptr, dword, offset, "PCI READ"); -} -#endif - -static inline void read_host_csr(struct mei_csr *csr) -{ - mei_read_dword_ptr(csr, MEI_H_CSR); -} - -static inline void write_host_csr(struct mei_csr *csr) -{ - mei_write_dword_ptr(csr, MEI_H_CSR); -} - -static inline void read_me_csr(struct mei_csr *csr) -{ - mei_read_dword_ptr(csr, MEI_ME_CSR_HA); -} - -static inline void write_cb(u32 dword) -{ - write32(mei_base_address + (MEI_H_CB_WW/sizeof(u32)), dword); - mei_dump(NULL, dword, MEI_H_CB_WW, "WRITE"); -} - -static inline u32 read_cb(void) -{ - u32 dword = read32(mei_base_address + (MEI_ME_CB_RW/sizeof(u32))); - mei_dump(NULL, dword, MEI_ME_CB_RW, "READ"); - return dword; -} - -/* Wait for ME ready bit to be asserted */ -static int mei_wait_for_me_ready(void) -{ - struct mei_csr me; - unsigned int try = ME_RETRY; - - while (try--) { - read_me_csr(&me); - if (me.ready) - return 0; - udelay(ME_DELAY); - } - - printk(BIOS_ERR, "ME: failed to become ready\n"); - return -1; -} - -static void mei_reset(void) -{ - struct mei_csr host; - - if (mei_wait_for_me_ready() < 0) - return; - - /* Reset host and ME circular buffers for next message */ - read_host_csr(&host); - host.reset = 1; - host.interrupt_generate = 1; - write_host_csr(&host); - - if (mei_wait_for_me_ready() < 0) - return; - - /* Re-init and indicate host is ready */ - read_host_csr(&host); - host.interrupt_generate = 1; - host.ready = 1; - host.reset = 0; - write_host_csr(&host); -} - -static int mei_send_msg(struct mei_header *mei, struct mkhi_header *mkhi, - void *req_data) -{ - struct mei_csr host; - unsigned int ndata, n; - u32 *data; - - /* Number of dwords to write, ignoring MKHI */ - ndata = mei->length >> 2; - - /* Pad non-dword aligned request message length */ - if (mei->length & 3) - ndata++; - if (!ndata) { - printk(BIOS_DEBUG, "ME: request does not include MKHI\n"); - return -1; - } - ndata++; /* Add MEI header */ - - /* - * Make sure there is still room left in the circular buffer. - * Reset the buffer pointers if the requested message will not fit. - */ - read_host_csr(&host); - if ((host.buffer_depth - host.buffer_write_ptr) < ndata) { - printk(BIOS_ERR, "ME: circular buffer full, resetting...\n"); - mei_reset(); - read_host_csr(&host); - } - - /* - * This implementation does not handle splitting large messages - * across multiple transactions. Ensure the requested length - * will fit in the available circular buffer depth. - */ - if ((host.buffer_depth - host.buffer_write_ptr) < ndata) { - printk(BIOS_ERR, "ME: message (%u) too large for buffer (%u)\n", - ndata + 2, host.buffer_depth); - return -1; - } - - /* Write MEI header */ - mei_write_dword_ptr(mei, MEI_H_CB_WW); - ndata--; - - /* Write MKHI header */ - mei_write_dword_ptr(mkhi, MEI_H_CB_WW); - ndata--; - - /* Write message data */ - data = req_data; - for (n = 0; n < ndata; ++n) - write_cb(*data++); - - /* Generate interrupt to the ME */ - read_host_csr(&host); - host.interrupt_generate = 1; - write_host_csr(&host); - - /* Make sure ME is ready after sending request data */ - return mei_wait_for_me_ready(); -} - -static int mei_recv_msg(struct mkhi_header *mkhi, void *rsp_data, int rsp_bytes) -{ - struct mei_header mei_rsp; - struct mkhi_header mkhi_rsp; - struct mei_csr me, host; - unsigned int ndata, n; - unsigned int expected; - u32 *data; - - /* Total number of dwords to read from circular buffer */ - expected = (rsp_bytes + sizeof(mei_rsp) + sizeof(mkhi_rsp)) >> 2; - if (rsp_bytes & 3) - expected++; - - /* - * The interrupt status bit does not appear to indicate that the - * message has actually been received. Instead we wait until the - * expected number of dwords are present in the circular buffer. - */ - for (n = ME_RETRY; n; --n) { - read_me_csr(&me); - if ((me.buffer_write_ptr - me.buffer_read_ptr) >= expected) - break; - udelay(ME_DELAY); - } - if (!n) { - printk(BIOS_ERR, "ME: timeout waiting for data: expected " - "%u, available %u\n", expected, - me.buffer_write_ptr - me.buffer_read_ptr); - return -1; - } - - /* Read and verify MEI response header from the ME */ - mei_read_dword_ptr(&mei_rsp, MEI_ME_CB_RW); - if (!mei_rsp.is_complete) { - printk(BIOS_ERR, "ME: response is not complete\n"); - return -1; - } - - /* Handle non-dword responses and expect at least MKHI header */ - ndata = mei_rsp.length >> 2; - if (mei_rsp.length & 3) - ndata++; - if (ndata != (expected - 1)) { - printk(BIOS_ERR, "ME: response is missing data %d != %d\n", - ndata, (expected - 1)); - return -1; - } - - /* Read and verify MKHI response header from the ME */ - mei_read_dword_ptr(&mkhi_rsp, MEI_ME_CB_RW); - if (!mkhi_rsp.is_response || - mkhi->group_id != mkhi_rsp.group_id || - mkhi->command != mkhi_rsp.command) { - printk(BIOS_ERR, "ME: invalid response, group %u ?= %u, " - "command %u ?= %u, is_response %u\n", mkhi->group_id, - mkhi_rsp.group_id, mkhi->command, mkhi_rsp.command, - mkhi_rsp.is_response); - return -1; - } - ndata--; /* MKHI header has been read */ - - /* Make sure caller passed a buffer with enough space */ - if (ndata != (rsp_bytes >> 2)) { - printk(BIOS_ERR, "ME: not enough room in response buffer: " - "%u != %u\n", ndata, rsp_bytes >> 2); - return -1; - } - - /* Read response data from the circular buffer */ - data = rsp_data; - for (n = 0; n < ndata; ++n) - *data++ = read_cb(); - - /* Tell the ME that we have consumed the response */ - read_host_csr(&host); - host.interrupt_status = 1; - host.interrupt_generate = 1; - write_host_csr(&host); - - return mei_wait_for_me_ready(); -} - -static inline int mei_sendrecv(struct mei_header *mei, struct mkhi_header *mkhi, - void *req_data, void *rsp_data, int rsp_bytes) -{ - if (mei_send_msg(mei, mkhi, req_data) < 0) - return -1; - if (mei_recv_msg(mkhi, rsp_data, rsp_bytes) < 0) - return -1; - return 0; -} +/* FIXME: For verification purposes only */ +#include "me_common.c" /* Send END OF POST message to the ME */ static int __unused mkhi_end_of_post(void) @@ -431,11 +135,10 @@ void intel_me8_finalize_smm(void) struct me_hfs hfs; u32 reg32; - mei_base_address = (void *) - (pci_read_config32(PCH_ME_DEV, PCI_BASE_ADDRESS_0) & ~0xf); + update_mei_base_address(); /* S3 path will have hidden this device already */ - if (!mei_base_address || mei_base_address == (u32 *)0xfffffff0) + if (!is_mei_base_address_valid()) return; /* Make sure ME is in a mode that expects EOP */ @@ -533,91 +236,6 @@ static me_bios_path intel_me_path(struct device *dev) return path; } -/* Prepare ME for MEI messages */ -static int intel_mei_setup(struct device *dev) -{ - struct resource *res; - struct mei_csr host; - - /* Find the MMIO base for the ME interface */ - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (!res || res->base == 0 || res->size == 0) { - printk(BIOS_DEBUG, "ME: MEI resource not present!\n"); - return -1; - } - mei_base_address = (u32 *)(uintptr_t)res->base; - - /* Ensure Memory and Bus Master bits are set */ - pci_or_config16(dev, PCI_COMMAND, PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY); - - /* Clean up status for next message */ - read_host_csr(&host); - host.interrupt_generate = 1; - host.ready = 1; - host.reset = 0; - write_host_csr(&host); - - return 0; -} - -#if CONFIG(CHROMEOS) -#include -#endif - -/* Read the Extend register hash of ME firmware */ -static int intel_me_extend_valid(struct device *dev) -{ - struct me_heres status; - u32 extend[8] = {0}; - int i, count = 0; - - pci_read_dword_ptr(dev, &status, PCI_ME_HERES); - if (!status.extend_feature_present) { - printk(BIOS_ERR, "ME: Extend Feature not present\n"); - return -1; - } - - if (!status.extend_reg_valid) { - printk(BIOS_ERR, "ME: Extend Register not valid\n"); - return -1; - } - - switch (status.extend_reg_algorithm) { - case PCI_ME_EXT_SHA1: - count = 5; - printk(BIOS_DEBUG, "ME: Extend SHA-1: "); - break; - case PCI_ME_EXT_SHA256: - count = 8; - printk(BIOS_DEBUG, "ME: Extend SHA-256: "); - break; - default: - printk(BIOS_ERR, "ME: Extend Algorithm %d unknown\n", - status.extend_reg_algorithm); - return -1; - } - - for (i = 0; i < count; ++i) { - extend[i] = pci_read_config32(dev, PCI_ME_HER(i)); - printk(BIOS_DEBUG, "%08x", extend[i]); - } - printk(BIOS_DEBUG, "\n"); - -#if CONFIG(CHROMEOS) - /* Save hash in NVS for the OS to verify */ - chromeos_set_me_hash(extend, count); -#endif - - return 0; -} - -/* Hide the ME virtual PCI devices */ -static void intel_me_hide(struct device *dev) -{ - dev->enabled = 0; - pch_enable(dev); -} - static int intel_me_read_mbp(me_bios_payload *mbp_data); /* Check whether ME is present and do basic init */ @@ -627,7 +245,7 @@ static void intel_me_init(struct device *dev) me_bios_payload mbp_data; /* Do initial setup and determine the BIOS path */ - printk(BIOS_NOTICE, "ME: BIOS path: %s\n", me_bios_path_values[path]); + printk(BIOS_NOTICE, "ME: BIOS path: %s\n", me_get_bios_path_string(path)); switch (path) { case ME_S3WAKE_BIOS_PATH: diff --git a/src/southbridge/intel/bd82x6x/me_common.c b/src/southbridge/intel/bd82x6x/me_common.c new file mode 100644 index 0000000000..8e381711ce --- /dev/null +++ b/src/southbridge/intel/bd82x6x/me_common.c @@ -0,0 +1,419 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "me.h" +#include "pch.h" + +/* Path that the BIOS should take based on ME state */ +static const char *me_bios_path_values[] __unused = { + [ME_NORMAL_BIOS_PATH] = "Normal", + [ME_S3WAKE_BIOS_PATH] = "S3 Wake", + [ME_ERROR_BIOS_PATH] = "Error", + [ME_RECOVERY_BIOS_PATH] = "Recovery", + [ME_DISABLE_BIOS_PATH] = "Disable", + [ME_FIRMWARE_UPDATE_BIOS_PATH] = "Firmware Update", +}; + +static inline const char *const me_get_bios_path_string(int path) +{ + return me_bios_path_values[path]; +} + +/* MMIO base address for MEI interface */ +static u32 *mei_base_address; + +static void mei_dump(void *ptr, int dword, int offset, const char *type) +{ + struct mei_csr *csr; + + if (!CONFIG(DEBUG_INTEL_ME)) + return; + + printk(BIOS_SPEW, "%-9s[%02x] : ", type, offset); + + switch (offset) { + case MEI_H_CSR: + case MEI_ME_CSR_HA: + csr = ptr; + if (!csr) { + printk(BIOS_SPEW, "ERROR: 0x%08x\n", dword); + break; + } + printk(BIOS_SPEW, "cbd=%u cbrp=%02u cbwp=%02u ready=%u " + "reset=%u ig=%u is=%u ie=%u\n", csr->buffer_depth, + csr->buffer_read_ptr, csr->buffer_write_ptr, + csr->ready, csr->reset, csr->interrupt_generate, + csr->interrupt_status, csr->interrupt_enable); + break; + case MEI_ME_CB_RW: + case MEI_H_CB_WW: + printk(BIOS_SPEW, "CB: 0x%08x\n", dword); + break; + default: + printk(BIOS_SPEW, "0x%08x\n", offset); + break; + } +} + +/* + * ME/MEI access helpers using memcpy to avoid aliasing. + */ + +static inline void mei_read_dword_ptr(void *ptr, int offset) +{ + u32 dword = read32(mei_base_address + (offset / sizeof(u32))); + memcpy(ptr, &dword, sizeof(dword)); + mei_dump(ptr, dword, offset, "READ"); +} + +static inline void mei_write_dword_ptr(void *ptr, int offset) +{ + u32 dword = 0; + memcpy(&dword, ptr, sizeof(dword)); + write32(mei_base_address + (offset / sizeof(u32)), dword); + mei_dump(ptr, dword, offset, "WRITE"); +} + +#ifndef __SIMPLE_DEVICE__ +static inline void pci_read_dword_ptr(struct device *dev, void *ptr, int offset) +{ + u32 dword = pci_read_config32(dev, offset); + memcpy(ptr, &dword, sizeof(dword)); + mei_dump(ptr, dword, offset, "PCI READ"); +} +#endif + +static inline void read_host_csr(struct mei_csr *csr) +{ + mei_read_dword_ptr(csr, MEI_H_CSR); +} + +static inline void write_host_csr(struct mei_csr *csr) +{ + mei_write_dword_ptr(csr, MEI_H_CSR); +} + +static inline void read_me_csr(struct mei_csr *csr) +{ + mei_read_dword_ptr(csr, MEI_ME_CSR_HA); +} + +static inline void write_cb(u32 dword) +{ + write32(mei_base_address + (MEI_H_CB_WW / sizeof(u32)), dword); + mei_dump(NULL, dword, MEI_H_CB_WW, "WRITE"); +} + +static inline u32 read_cb(void) +{ + u32 dword = read32(mei_base_address + (MEI_ME_CB_RW / sizeof(u32))); + mei_dump(NULL, dword, MEI_ME_CB_RW, "READ"); + return dword; +} + +/* Wait for ME ready bit to be asserted */ +static int mei_wait_for_me_ready(void) +{ + struct mei_csr me; + unsigned int try = ME_RETRY; + + while (try--) { + read_me_csr(&me); + if (me.ready) + return 0; + udelay(ME_DELAY); + } + + printk(BIOS_ERR, "ME: failed to become ready\n"); + return -1; +} + +static void mei_reset(void) +{ + struct mei_csr host; + + if (mei_wait_for_me_ready() < 0) + return; + + /* Reset host and ME circular buffers for next message */ + read_host_csr(&host); + host.reset = 1; + host.interrupt_generate = 1; + write_host_csr(&host); + + if (mei_wait_for_me_ready() < 0) + return; + + /* Re-init and indicate host is ready */ + read_host_csr(&host); + host.interrupt_generate = 1; + host.ready = 1; + host.reset = 0; + write_host_csr(&host); +} + +static int mei_send_msg(struct mei_header *mei, struct mkhi_header *mkhi, void *req_data) +{ + struct mei_csr host; + unsigned int ndata, n; + u32 *data; + + /* Number of dwords to write, ignoring MKHI */ + ndata = mei->length >> 2; + + /* Pad non-dword aligned request message length */ + if (mei->length & 3) + ndata++; + if (!ndata) { + printk(BIOS_DEBUG, "ME: request does not include MKHI\n"); + return -1; + } + ndata++; /* Add MEI header */ + + /* + * Make sure there is still room left in the circular buffer. + * Reset the buffer pointers if the requested message will not fit. + */ + read_host_csr(&host); + if ((host.buffer_depth - host.buffer_write_ptr) < ndata) { + printk(BIOS_ERR, "ME: circular buffer full, resetting...\n"); + mei_reset(); + read_host_csr(&host); + } + + /* + * This implementation does not handle splitting large messages + * across multiple transactions. Ensure the requested length + * will fit in the available circular buffer depth. + */ + if ((host.buffer_depth - host.buffer_write_ptr) < ndata) { + printk(BIOS_ERR, "ME: message (%u) too large for buffer (%u)\n", + ndata + 2, host.buffer_depth); + return -1; + } + + /* Write MEI header */ + mei_write_dword_ptr(mei, MEI_H_CB_WW); + ndata--; + + /* Write MKHI header */ + mei_write_dword_ptr(mkhi, MEI_H_CB_WW); + ndata--; + + /* Write message data */ + data = req_data; + for (n = 0; n < ndata; ++n) + write_cb(*data++); + + /* Generate interrupt to the ME */ + read_host_csr(&host); + host.interrupt_generate = 1; + write_host_csr(&host); + + /* Make sure ME is ready after sending request data */ + return mei_wait_for_me_ready(); +} + +static int mei_recv_msg(struct mkhi_header *mkhi, void *rsp_data, int rsp_bytes) +{ + struct mei_header mei_rsp; + struct mkhi_header mkhi_rsp; + struct mei_csr me, host; + unsigned int ndata, n; + unsigned int expected; + u32 *data; + + /* Total number of dwords to read from circular buffer */ + expected = (rsp_bytes + sizeof(mei_rsp) + sizeof(mkhi_rsp)) >> 2; + if (rsp_bytes & 3) + expected++; + + /* + * The interrupt status bit does not appear to indicate that the + * message has actually been received. Instead we wait until the + * expected number of dwords are present in the circular buffer. + */ + for (n = ME_RETRY; n; --n) { + read_me_csr(&me); + if ((me.buffer_write_ptr - me.buffer_read_ptr) >= expected) + break; + udelay(ME_DELAY); + } + if (!n) { + printk(BIOS_ERR, "ME: timeout waiting for data: expected %u, available %u\n", + expected, me.buffer_write_ptr - me.buffer_read_ptr); + return -1; + } + + /* Read and verify MEI response header from the ME */ + mei_read_dword_ptr(&mei_rsp, MEI_ME_CB_RW); + if (!mei_rsp.is_complete) { + printk(BIOS_ERR, "ME: response is not complete\n"); + return -1; + } + + /* Handle non-dword responses and expect at least MKHI header */ + ndata = mei_rsp.length >> 2; + if (mei_rsp.length & 3) + ndata++; + if (ndata != (expected - 1)) { + printk(BIOS_ERR, "ME: response is missing data %d != %d\n", + ndata, (expected - 1)); + return -1; + } + + /* Read and verify MKHI response header from the ME */ + mei_read_dword_ptr(&mkhi_rsp, MEI_ME_CB_RW); + if (!mkhi_rsp.is_response || + mkhi->group_id != mkhi_rsp.group_id || + mkhi->command != mkhi_rsp.command) { + printk(BIOS_ERR, "ME: invalid response, group %u ?= %u, " + "command %u ?= %u, is_response %u\n", mkhi->group_id, + mkhi_rsp.group_id, mkhi->command, mkhi_rsp.command, + mkhi_rsp.is_response); + return -1; + } + ndata--; /* MKHI header has been read */ + + /* Make sure caller passed a buffer with enough space */ + if (ndata != (rsp_bytes >> 2)) { + printk(BIOS_ERR, "ME: not enough room in response buffer: %u != %u\n", + ndata, rsp_bytes >> 2); + return -1; + } + + /* Read response data from the circular buffer */ + data = rsp_data; + for (n = 0; n < ndata; ++n) + *data++ = read_cb(); + + /* Tell the ME that we have consumed the response */ + read_host_csr(&host); + host.interrupt_status = 1; + host.interrupt_generate = 1; + write_host_csr(&host); + + return mei_wait_for_me_ready(); +} + +static inline int mei_sendrecv(struct mei_header *mei, struct mkhi_header *mkhi, + void *req_data, void *rsp_data, int rsp_bytes) +{ + if (mei_send_msg(mei, mkhi, req_data) < 0) + return -1; + if (mei_recv_msg(mkhi, rsp_data, rsp_bytes) < 0) + return -1; + return 0; +} + +#ifdef __SIMPLE_DEVICE__ + +static inline void update_mei_base_address(void) +{ + mei_base_address = (u32 *)(pci_read_config32(PCH_ME_DEV, PCI_BASE_ADDRESS_0) & ~0xf); +} + +static inline bool is_mei_base_address_valid(void) +{ + return mei_base_address && mei_base_address != (u32 *)0xfffffff0; +} + +#else + +/* Prepare ME for MEI messages */ +static int intel_mei_setup(struct device *dev) +{ + struct resource *res; + struct mei_csr host; + + /* Find the MMIO base for the ME interface */ + res = find_resource(dev, PCI_BASE_ADDRESS_0); + if (!res || res->base == 0 || res->size == 0) { + printk(BIOS_DEBUG, "ME: MEI resource not present!\n"); + return -1; + } + mei_base_address = (u32 *)(uintptr_t)res->base; + + /* Ensure Memory and Bus Master bits are set */ + pci_or_config16(dev, PCI_COMMAND, PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY); + + /* Clean up status for next message */ + read_host_csr(&host); + host.interrupt_generate = 1; + host.ready = 1; + host.reset = 0; + write_host_csr(&host); + + return 0; +} + +#if CONFIG(CHROMEOS) +#include +#endif + +/* Read the Extend register hash of ME firmware */ +static int intel_me_extend_valid(struct device *dev) +{ + struct me_heres status; + u32 extend[8] = {0}; + int i, count = 0; + + pci_read_dword_ptr(dev, &status, PCI_ME_HERES); + if (!status.extend_feature_present) { + printk(BIOS_ERR, "ME: Extend Feature not present\n"); + return -1; + } + + if (!status.extend_reg_valid) { + printk(BIOS_ERR, "ME: Extend Register not valid\n"); + return -1; + } + + switch (status.extend_reg_algorithm) { + case PCI_ME_EXT_SHA1: + count = 5; + printk(BIOS_DEBUG, "ME: Extend SHA-1: "); + break; + case PCI_ME_EXT_SHA256: + count = 8; + printk(BIOS_DEBUG, "ME: Extend SHA-256: "); + break; + default: + printk(BIOS_ERR, "ME: Extend Algorithm %d unknown\n", + status.extend_reg_algorithm); + return -1; + } + + for (i = 0; i < count; ++i) { + extend[i] = pci_read_config32(dev, PCI_ME_HER(i)); + printk(BIOS_DEBUG, "%08x", extend[i]); + } + printk(BIOS_DEBUG, "\n"); + +#if CONFIG(CHROMEOS) + /* Save hash in NVS for the OS to verify */ + chromeos_set_me_hash(extend, count); +#endif + + return 0; +} + +/* Hide the ME virtual PCI devices */ +static void intel_me_hide(struct device *dev) +{ + dev->enabled = 0; + pch_enable(dev); +} + +#endif -- cgit v1.2.3