From 2a700ec16322561ad487e6ef1ae8878f9a7e4357 Mon Sep 17 00:00:00 2001 From: Duncan Laurie Date: Mon, 8 Oct 2012 15:26:54 -0700 Subject: SPI: Configure Software Sequence SPI Freq to match descriptor Right now the SPI bus is getting set to 20mhz for transactions initiated with the software sequence interface. In order to be able to do reasonable fastread/write/erase we can bump this up to a higher value at boot before it gets locked at 20mhz. To do this read out the speed set in the SPI descriptor for hardware sequencing and apply it to software sequencing. Change-Id: I79aa2fe7f30f734785d61955ed81329fc654f4a4 Signed-off-by: Duncan Laurie Reviewed-on: http://review.coreboot.org/1773 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer --- src/southbridge/intel/bd82x6x/bootblock.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) (limited to 'src/southbridge') diff --git a/src/southbridge/intel/bd82x6x/bootblock.c b/src/southbridge/intel/bd82x6x/bootblock.c index 0191bbfc7f..7d0db7fba1 100644 --- a/src/southbridge/intel/bd82x6x/bootblock.c +++ b/src/southbridge/intel/bd82x6x/bootblock.c @@ -65,6 +65,26 @@ static void enable_port80_on_lpc(void) #endif } +static void set_spi_speed(void) +{ + u32 fdod; + u8 ssfc; + + /* Observe SPI Descriptor Component Section 0 */ + RCBA32(0x38b0) = 0x1000; + + /* Extract the Write/Erase SPI Frequency from descriptor */ + fdod = RCBA32(0x38b4); + fdod >>= 24; + fdod &= 7; + + /* Set Software Sequence frequency to match */ + ssfc = RCBA8(0x3893); + ssfc &= ~7; + ssfc |= fdod; + RCBA8(0x3893) = ssfc; +} + static void bootblock_southbridge_init(void) { #if CONFIG_COLLECT_TIMESTAMPS @@ -72,6 +92,7 @@ static void bootblock_southbridge_init(void) #endif enable_spi_prefetch(); enable_port80_on_lpc(); + set_spi_speed(); /* Enable upper 128bytes of CMOS */ RCBA32(RC) = (1 << 2); -- cgit v1.2.3