From 138f2cede491b65cfd8c73b9185a2dc7ee10b8b3 Mon Sep 17 00:00:00 2001 From: Duncan Laurie Date: Wed, 12 Dec 2012 09:22:34 -0800 Subject: haswell: remove GPIO60 memory reset gate on S3 transition This is no longer tied to a GPIO but has a proper chipset pin. Change-Id: Iba70338e8c67e3c3c1cb32e69bfea1282fda8cb5 Signed-off-by: Duncan Laurie Reviewed-on: http://review.coreboot.org/2643 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich --- src/southbridge/intel/lynxpoint/smihandler.c | 38 ---------------------------- 1 file changed, 38 deletions(-) (limited to 'src/southbridge') diff --git a/src/southbridge/intel/lynxpoint/smihandler.c b/src/southbridge/intel/lynxpoint/smihandler.c index d31e350b76..7c982d129a 100644 --- a/src/southbridge/intel/lynxpoint/smihandler.c +++ b/src/southbridge/intel/lynxpoint/smihandler.c @@ -290,41 +290,6 @@ static void busmaster_disable_on_bus(int bus) } } -/* - * Drive GPIO 60 low to gate memory reset in S3. - * - * Intel reference designs all use GPIO 60 but it is - * not a requirement and boards could use a different pin. - */ -static void southbridge_gate_memory_reset(void) -{ - u32 reg32; - u16 gpiobase; - - gpiobase = pci_read_config16(PCI_DEV(0, 0x1f, 0), GPIOBASE) & 0xfffc; - if (!gpiobase) - return; - - /* Make sure it is set as GPIO */ - reg32 = inl(gpiobase + GPIO_USE_SEL2); - if (!(reg32 & (1 << 28))) { - reg32 |= (1 << 28); - outl(reg32, gpiobase + GPIO_USE_SEL2); - } - - /* Make sure it is set as output */ - reg32 = inl(gpiobase + GP_IO_SEL2); - if (reg32 & (1 << 28)) { - reg32 &= ~(1 << 28); - outl(reg32, gpiobase + GP_IO_SEL2); - } - - /* Drive the output low */ - reg32 = inl(gpiobase + GP_LVL2); - reg32 &= ~(1 << 28); - outl(reg32, gpiobase + GP_LVL2); -} - static void southbridge_smi_sleep(unsigned int node, smm_state_save_area_t *state_save) { u8 reg8; @@ -372,9 +337,6 @@ static void southbridge_smi_sleep(unsigned int node, smm_state_save_area_t *stat case 5: printk(BIOS_DEBUG, "SMI#: Entering S3 (Suspend-To-RAM)\n"); - /* Gate memory reset */ - southbridge_gate_memory_reset(); - /* Invalidate the cache before going to S3 */ wbinvd(); break; -- cgit v1.2.3