From 64ed2b73451de4b655b3fdda0ff42825a165c317 Mon Sep 17 00:00:00 2001 From: Stefan Reinauer Date: Wed, 31 Mar 2010 14:47:43 +0000 Subject: Drop \r\n and \n\r as both print_XXX and printk now do this internally. Only some assembler files still have \r\n ... Can we move that part to C completely? Signed-off-by: Stefan Reinauer Acked-by: Stefan Reinauer git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5342 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/southbridge/via/vt8237r/vt8237r_early_smbus.c | 32 +++++++++++------------ 1 file changed, 16 insertions(+), 16 deletions(-) (limited to 'src/southbridge/via/vt8237r') diff --git a/src/southbridge/via/vt8237r/vt8237r_early_smbus.c b/src/southbridge/via/vt8237r/vt8237r_early_smbus.c index 17b32d529f..533cbe0c88 100644 --- a/src/southbridge/via/vt8237r/vt8237r_early_smbus.c +++ b/src/southbridge/via/vt8237r/vt8237r_early_smbus.c @@ -39,17 +39,17 @@ static void smbus_print_error(u8 host_status, int loops) return; if (loops >= SMBUS_TIMEOUT) - print_err("SMBus timeout\r\n"); + print_err("SMBus timeout\n"); if (host_status & (1 << 4)) - print_err("Interrupt/SMI# was Failed Bus Transaction\r\n"); + print_err("Interrupt/SMI# was Failed Bus Transaction\n"); if (host_status & (1 << 3)) - print_err("Bus error\r\n"); + print_err("Bus error\n"); if (host_status & (1 << 2)) - print_err("Device error\r\n"); + print_err("Device error\n"); if (host_status & (1 << 1)) - print_debug("Interrupt/SMI# completed successfully\r\n"); + print_debug("Interrupt/SMI# completed successfully\n"); if (host_status & (1 << 0)) - print_err("Host busy\r\n"); + print_err("Host busy\n"); } /** @@ -59,7 +59,7 @@ static void smbus_wait_until_ready(void) { int loops; - PRINT_DEBUG("Waiting until SMBus ready\r\n"); + PRINT_DEBUG("Waiting until SMBus ready\n"); loops = 0; /* Yes, this is a mess, but it's the easiest way to do it. */ @@ -81,7 +81,7 @@ static void smbus_reset(void) PRINT_DEBUG("After reset status: "); PRINT_DEBUG_HEX16(inb(SMBHSTSTAT)); - PRINT_DEBUG("\r\n"); + PRINT_DEBUG("\n"); } /** @@ -98,7 +98,7 @@ u8 smbus_read_byte(u8 dimm, u8 offset) PRINT_DEBUG_HEX16(dimm); PRINT_DEBUG(" OFFSET "); PRINT_DEBUG_HEX16(offset); - PRINT_DEBUG("\r\n"); + PRINT_DEBUG("\n"); smbus_reset(); @@ -121,7 +121,7 @@ u8 smbus_read_byte(u8 dimm, u8 offset) val = inb(SMBHSTDAT0); PRINT_DEBUG("Read: "); PRINT_DEBUG_HEX16(val); - PRINT_DEBUG("\r\n"); + PRINT_DEBUG("\n"); /* Probably don't have to do this, but it can't hurt. */ smbus_reset(); @@ -144,7 +144,7 @@ void enable_smbus(void) dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT8237S_LPC), 0); if (dev == PCI_DEV_INVALID) - die("Power management controller not found\r\n"); + die("Power management controller not found\n"); } /* @@ -189,7 +189,7 @@ void smbus_fixup(const struct mem_controller *ctrl) ram_slots = ARRAY_SIZE(ctrl->channel0); if (!ram_slots) { - print_err("smbus_fixup() thinks there are no RAM slots!\r\n"); + print_err("smbus_fixup() thinks there are no RAM slots!\n"); return; } @@ -213,9 +213,9 @@ void smbus_fixup(const struct mem_controller *ctrl) } if (i >= SMBUS_TIMEOUT) - print_err("SMBus timed out while warming up\r\n"); + print_err("SMBus timed out while warming up\n"); else - PRINT_DEBUG("Done\r\n"); + PRINT_DEBUG("Done\n"); } /* FIXME: Better separate the NB and SB, will be done once it works. */ @@ -310,7 +310,7 @@ int acpi_is_wakeup_early(void) { dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT8237S_LPC), 0); if (dev == PCI_DEV_INVALID) - die("Power management controller not found\r\n"); + die("Power management controller not found\n"); } /* Set ACPI base address to I/O VT8237R_ACPI_IO_BASE. */ @@ -337,7 +337,7 @@ void vt8237_early_spi_init(void) PCI_DEVICE_ID_VIA_VT8237S_LPC), 0); if (dev == PCI_DEV_INVALID) - die("SB not found\r\n"); + die("SB not found\n"); /* Put SPI base 20 d0 fe. */ tmp = pci_read_config32(dev, 0xbc); -- cgit v1.2.3