From cea7e8bdefbc359f9ad04ea3dfe8f3e1d3e13369 Mon Sep 17 00:00:00 2001 From: Kyösti Mälkki Date: Thu, 24 May 2018 02:38:24 +0300 Subject: Remove VIA vt8237r southbridge support MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Change-Id: I2d0400212d32c4dee71163d2f5919c290b8c0616 Signed-off-by: Kyösti Mälkki Reviewed-on: https://review.coreboot.org/26682 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth --- src/southbridge/via/vt8237r/lpc.c | 686 -------------------------------------- 1 file changed, 686 deletions(-) delete mode 100644 src/southbridge/via/vt8237r/lpc.c (limited to 'src/southbridge/via/vt8237r/lpc.c') diff --git a/src/southbridge/via/vt8237r/lpc.c b/src/southbridge/via/vt8237r/lpc.c deleted file mode 100644 index 998340f419..0000000000 --- a/src/southbridge/via/vt8237r/lpc.c +++ /dev/null @@ -1,686 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007, 2008 Rudolf Marek - * Copyright (C) 2009 Jon Harrison - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* Inspiration from other VIA SB code. */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "vt8237r.h" -#include "chip.h" - -static void southbridge_init_common(struct device *dev); - -#if IS_ENABLED(CONFIG_EPIA_VT8237R_INIT) - /* Interrupts for INT# A B C D */ -static const unsigned char pciIrqs[4] = { 10, 11, 12, 0}; - - /* Interrupt Assignments for Pins 1 2 3 4 */ -static const unsigned char sataPins[4] = { 'A','B','C','D'}; -static const unsigned char vgaPins[4] = { 'A','B','C','D'}; -static const unsigned char usbPins[4] = { 'A','B','C','D'}; -static const unsigned char enetPins[4] = { 'A','B','C','D'}; -static const unsigned char vt8237Pins[4] = { 'A','B','C','D'}; -static const unsigned char slotPins[4] = { 'C','D','A','B'}; -static const unsigned char riserPins[4] = { 'D','C','B','A'}; - -static unsigned char *pin_to_irq(const unsigned char *pin) -{ - static unsigned char Irqs[4]; - int i; - for (i = 0; i < 4; i++) - Irqs[i] = pciIrqs[ pin[i] - 'A' ]; - - return Irqs; -} -#endif - -/** Set up PCI IRQ routing, route everything through APIC. */ -static void pci_routing_fixup(struct device *dev) -{ -#if IS_ENABLED(CONFIG_EPIA_VT8237R_INIT) - struct device *pdev; -#endif - - /* PCI PNP Interrupt Routing INTE/F - disable */ - pci_write_config8(dev, 0x44, 0x00); - - /* PCI PNP Interrupt Routing INTG/H - disable */ - pci_write_config8(dev, 0x45, 0x00); - - /* Gate Interrupts until RAM Writes are flushed */ - pci_write_config8(dev, 0x49, 0x20); - -#if IS_ENABLED(CONFIG_EPIA_VT8237R_INIT) - - /* Share INTE-INTH with INTA-INTD as per stock BIOS. */ - pci_write_config8(dev, 0x46, 0x00); - - /* setup PCI IRQ routing (For PCI Slot)*/ - pci_write_config8(dev, 0x55, pciIrqs[0] << 4); - pci_write_config8(dev, 0x56, pciIrqs[1] | (pciIrqs[2] << 4) ); - pci_write_config8(dev, 0x57, pciIrqs[3] << 4); - - /* PCI Routing Fixup */ - - //Setup MiniPCI Slot - pci_assign_irqs(0, 0x14, pin_to_irq(slotPins)); - - // Via 2 slot riser card 2nd slot - pci_assign_irqs(0, 0x13, pin_to_irq(riserPins)); - - //Setup USB - pci_assign_irqs(0, 0x10, pin_to_irq(usbPins)); - - //Setup VT8237R Sound - pci_assign_irqs(0, 0x11, pin_to_irq(vt8237Pins)); - - //Setup Ethernet - pci_assign_irqs(0, 0x12, pin_to_irq(enetPins)); - - //Setup VGA - pci_assign_irqs(1, 0x00, pin_to_irq(vgaPins)); - - /* APIC Routing Fixup */ - - // Setup SATA - pdev = dev_find_device(PCI_VENDOR_ID_VIA, - PCI_DEVICE_ID_VIA_VT6420_SATA, 0); - pci_write_config8(pdev, PCI_INTERRUPT_PIN, 0x02); - pci_assign_irqs(0, 0x0f, pin_to_irq(sataPins)); - - - // Setup PATA Override - pdev = dev_find_device(PCI_VENDOR_ID_VIA, - PCI_DEVICE_ID_VIA_82C586_1, 0); - pci_write_config8(pdev, PCI_INTERRUPT_PIN, 0x01); - pci_write_config8(pdev, PCI_INTERRUPT_LINE, 0xFF); - -#else - /* Route INTE-INTH through registers above, no map to INTA-INTD. */ - pci_write_config8(dev, 0x46, 0x10); - - /* PCI Interrupt Polarity */ - pci_write_config8(dev, 0x54, 0x00); - - /* PCI INTA# Routing */ - pci_write_config8(dev, 0x55, 0x00); - - /* PCI INTB#/C# Routing */ - pci_write_config8(dev, 0x56, 0x00); - - /* PCI INTD# Routing */ - pci_write_config8(dev, 0x57, 0x00); -#endif -} - - - -/** - * Set up the power management capabilities directly into ACPI mode. - * This avoids having to handle any System Management Interrupts (SMIs). - */ - -static void setup_pm(struct device *dev) -{ - u16 tmp; - struct southbridge_via_vt8237r_config *cfg; - - cfg = dev->chip_info; - - /* Debounce LID and PWRBTN# Inputs for 16ms. */ - pci_write_config8(dev, 0x80, 0x20); - - /* Set ACPI base address to I/O VT8237R_ACPI_IO_BASE. */ - pci_write_config16(dev, 0x88, VT8237R_ACPI_IO_BASE | 0x1); - - /* Set ACPI to 9, must set IRQ 9 override to level! Set PSON gating. */ - pci_write_config8(dev, 0x82, 0x40 | VT8237R_ACPI_IRQ); - -#if IS_ENABLED(CONFIG_EPIA_VT8237R_INIT) - /* Primary interrupt channel, define wake events 0=IRQ0 15=IRQ15 1=en. */ - pci_write_config16(dev, 0x84, 0x3052); -#else - /* Primary interrupt channel, define wake events 0=IRQ0 15=IRQ15 1=en. */ - pci_write_config16(dev, 0x84, 0x30b2); - -#endif - /* SMI output level to low, 7.5us throttle clock */ - pci_write_config8(dev, 0x8d, 0x18); - - /* GP Timer Control 1s */ - pci_write_config8(dev, 0x93, 0x88); - - /* - * 7 = SMBus clock from RTC 32.768KHz - * 5 = Internal PLL reset from susp disabled - * 2 = GPO2 is SUSA# - */ - tmp = 0xa0; - if (cfg && cfg->enable_gpo3) - tmp |= 0x10; - pci_write_config8(dev, 0x94, tmp); - - /* - * 7 = stp to sust delay 1msec - * 6 = SUSST# Deasserted Before PWRGD for STD - * 5 = Keyboard/Mouse Swap - * 4 = PWRGOOD reset on VT8237A/S - * 3 = GPO26/GPO27 is GPO - * 2 = Disable Alert on Lan - * 1 = SUSCLK/GPO4 - * 0 = USB Wakeup - */ - -#if IS_ENABLED(CONFIG_EPIA_VT8237R_INIT) - pci_write_config8(dev, 0x95, 0xc2); -#else - tmp = 0xcc; - if (cfg) { - if (cfg->disable_gpo26_gpo27) - tmp &= ~0x08; - if (cfg->enable_aol_2_smb_slave) - tmp &= ~0x04; - } - pci_write_config8(dev, 0x95, tmp); -#endif - - /* Disable GP3 timer. */ - pci_write_config8(dev, 0x98, 0); - - /* Enable ACPI access RTC signal gated with PSON. */ - pci_write_config8(dev, 0x81, 0x84); - - /* Clear status events. */ - outw(0xffff, VT8237R_ACPI_IO_BASE + 0x00); - outw(0xffff, VT8237R_ACPI_IO_BASE + 0x20); - outw(0xffff, VT8237R_ACPI_IO_BASE + 0x28); - outl(0xffffffff, VT8237R_ACPI_IO_BASE + 0x30); - - /* Disable SCI on GPIO. */ - outw(0x0, VT8237R_ACPI_IO_BASE + 0x22); - - /* Disable SMI on GPIO. */ - outw(0x0, VT8237R_ACPI_IO_BASE + 0x24); - - /* Disable all global enable SMIs, except SW SMI */ - outw(0x40, VT8237R_ACPI_IO_BASE + 0x2a); - - /* Primary activity SMI disable. */ - outl(0x0, VT8237R_ACPI_IO_BASE + 0x34); - - /* GP timer reload on none. */ - outl(0x0, VT8237R_ACPI_IO_BASE + 0x38); - - /* Disable extended IO traps. */ - outb(0x0, VT8237R_ACPI_IO_BASE + 0x42); - - /* SCI is generated for RTC/pwrBtn/slpBtn. */ - tmp = inw(VT8237R_ACPI_IO_BASE + 0x04); - - /* All SMI on, both IDE buses ON, PSON rising edge. */ - outw(0x1, VT8237R_ACPI_IO_BASE + 0x2c); - - /* clear sleep */ - tmp &= ~(7 << 10); - tmp |= 1; - outw(tmp, VT8237R_ACPI_IO_BASE + 0x04); -} - -int acpi_get_sleep_type(void) -{ - u16 tmp = inw(VT8237R_ACPI_IO_BASE + 0x04); - return ((tmp & (7 << 10)) >> 10) == 1 ? 3 : 0; -} - -static void vt8237r_init(struct device *dev) -{ - u8 enables; - struct southbridge_via_vt8237r_config *cfg; - - cfg = dev->chip_info; - -#if IS_ENABLED(CONFIG_EPIA_VT8237R_INIT) - printk(BIOS_SPEW, "Entering vt8237r_init, for EPIA.\n"); - /* - * TODO: Looks like stock BIOS can do this but causes a hang - * Enable SATA LED, disable special CPU Frequency Change - - * GPIO28 GPIO22 GPIO29 GPIO23 are GPIOs. - * Setup to match EPIA default - * PCS0# on Pin U1 - */ - enables = pci_read_config8(dev, 0xe5); - enables |= 0x23; - pci_write_config8(dev, 0xe5, enables); - - /* - * Enable Flash Write Access. - * Note EPIA-N Does not use REQ5 or PCISTP#(Hang) - */ - enables = pci_read_config8(dev, 0xe4); - enables |= 0x2B; - pci_write_config8(dev, 0xe4, enables); - - /* Enables Extra RTC Ports */ - enables = pci_read_config8(dev, 0x4E); - enables |= 0x80; - pci_write_config8(dev, 0x4E, enables); - -#else - printk(BIOS_SPEW, "Entering vt8237r_init.\n"); - /* - * Enable SATA LED, disable special CPU Frequency Change - - * GPIO28 GPIO22 GPIO29 GPIO23 are GPIOs. - */ - pci_write_config8(dev, 0xe5, 0x09); - - enables = 0x4; - if (cfg) { - if (cfg->enable_gpo5) - enables |= 0x01; - if (cfg->gpio15_12_dir_output) - enables |= 0x10; - } - /* REQ5 as PCI request input - should be together with INTE-INTH. */ - pci_write_config8(dev, 0xe4, enables); -#endif - - /* Set bit 3 of 0x4f (use INIT# as CPU reset). */ - enables = pci_read_config8(dev, 0x4f); - enables |= 0x08; - pci_write_config8(dev, 0x4f, enables); - -#if IS_ENABLED(CONFIG_EPIA_VT8237R_INIT) - /* - * Set Read Pass Write Control Enable - */ - pci_write_config8(dev, 0x48, 0x0c); -#else - /* - * Set Read Pass Write Control Enable - * (force A2 from APIC FSB to low). - */ - pci_write_config8(dev, 0x48, 0x8c); -#endif - - southbridge_init_common(dev); - -#if !IS_ENABLED(CONFIG_EPIA_VT8237R_INIT) - /* FIXME: Intel needs more bit set for C2/C3. */ - - /* - * Allow SLP# signal to assert LDTSTOP_L. - * Will work for C3 and for FID/VID change. - */ - outb(0x1, VT8237R_ACPI_IO_BASE + 0x11); -#endif - - printk(BIOS_SPEW, "Leaving %s.\n", __func__); - printk(BIOS_SPEW, "And taking a dump:\n"); - dump_south(dev); -} - -static void vt8237a_init(struct device *dev) -{ - /* - * FIXME: This is based on vt8237s_init() and the values the AMI - * BIOS on my M2V wrote to these registers (by looking - * at lspci -nxxx output). - * Works for me. - */ - u32 tmp; - - /* Set bit 3 of 0x4f (use INIT# as CPU reset). */ - tmp = pci_read_config8(dev, 0x4f); - tmp |= 0x08; - pci_write_config8(dev, 0x4f, tmp); - - /* - * bit2: REQ5 as PCI request input - should be together with INTE-INTH. - * bit5: usb power control lines as gpio - */ - pci_write_config8(dev, 0xe4, 0x24); - /* - * Enable APIC wakeup from INTH - * Enable SATA LED, disable special CPU Frequency Change - - * GPIO28 GPIO22 GPIO29 GPIO23 are GPIOs. - */ - pci_write_config8(dev, 0xe5, 0x69); - - /* Reduce further the STPCLK/LDTSTP signal to 5us. */ - pci_write_config8(dev, 0xec, 0x4); - - /* Host Bus Power Management Control, maybe not needed */ - pci_write_config8(dev, 0x8c, 0x5); - - /* Enable HPET */ - pci_write_config32(dev, 0x68, (CONFIG_HPET_ADDRESS | 0x80)); - - southbridge_init_common(dev); - - /* Share INTE-INTH with INTA-INTD for simplicity */ - pci_write_config8(dev, 0x46, 0x00); - - /* FIXME: Intel needs more bit set for C2/C3. */ - - /* - * Allow SLP# signal to assert LDTSTOP_L. - * Will work for C3 and for FID/VID change. - */ - outb(0x1, VT8237R_ACPI_IO_BASE + 0x11); - - dump_south(dev); -} - -static void vt8237s_init(struct device *dev) -{ - u32 tmp; - - /* Put SPI base VT8237S_SPI_MEM_BASE. */ - tmp = pci_read_config32(dev, 0xbc); - pci_write_config32(dev, 0xbc, - (VT8237S_SPI_MEM_BASE >> 8) | (tmp & 0xFF000000)); - - /* - * REQ5 as PCI request input - should be together with INTE-INTH. - */ - pci_write_config8(dev, 0xe4, 0x04); - - /* Reduce further the STPCLK/LDTSTP signal to 5us. */ - pci_write_config8(dev, 0xec, 0x4); - - /* Host Bus Power Management Control, maybe not needed */ - pci_write_config8(dev, 0x8c, 0x5); - - /* Enable HPET, does not work correctly on R. */ - pci_write_config32(dev, 0x68, (CONFIG_HPET_ADDRESS | 0x80)); - - southbridge_init_common(dev); - - /* FIXME: Intel needs more bit set for C2/C3. */ - - /* - * Allow SLP# signal to assert LDTSTOP_L. - * Will work for C3 and for FID/VID change. FIXME FIXME, pre rev A2. - */ - outb(0xff, VT8237R_ACPI_IO_BASE + 0x50); - - dump_south(dev); -} - -static void vt8237_common_init(struct device *dev) -{ - u8 enables, byte; - struct southbridge_via_vt8237r_config *cfg; -#if !IS_ENABLED(CONFIG_EPIA_VT8237R_INIT) - unsigned char pwr_on; -#endif - - cfg = dev->chip_info; - - /* Enable addr/data stepping. */ - byte = pci_read_config8(dev, PCI_COMMAND); - byte |= PCI_COMMAND_WAIT; - pci_write_config8(dev, PCI_COMMAND, byte); - -/* EPIA-N(L) Uses CN400 for BIOS Access */ -#if !IS_ENABLED(CONFIG_EPIA_VT8237R_INIT) - /* Enable the internal I/O decode. */ - enables = pci_read_config8(dev, 0x6C); - enables |= 0x80; - pci_write_config8(dev, 0x6C, enables); - - /* - * ROM decode - * bit range - * 7 000E0000h-000EFFFFh - * 6 FFF00000h-FFF7FFFFh - * 5 FFE80000h-FFEFFFFFh - * 4 FFE00000h-FFE7FFFFh - * 3 FFD80000h-FFDFFFFFh - * 2 FFD00000h-FFD7FFFFh - * 1 FFC80000h-FFCFFFFFh - * 0 FFC00000h-FFC7FFFFh - * So 0x7f here sets ROM decode to FFC00000-FFFFFFFF or 4Mbyte. - */ - pci_write_config8(dev, 0x41, 0x7f); -#endif - - /* - * Set bit 6 of 0x40 (I/O recovery time). - * IMPORTANT FIX - EISA = ECLR reg at 0x4d0! Decoding must be on so - * that PCI interrupts can be properly marked as level triggered. - */ - enables = pci_read_config8(dev, 0x40); - enables |= 0x44; - pci_write_config8(dev, 0x40, enables); - - /* Line buffer control */ - enables = pci_read_config8(dev, 0x42); - enables |= 0xf8; - pci_write_config8(dev, 0x42, enables); - - /* Delay transaction control */ - pci_write_config8(dev, 0x43, 0xb); - -#if IS_ENABLED(CONFIG_EPIA_VT8237R_INIT) - /* I/O recovery time, default IDE routing */ - pci_write_config8(dev, 0x4c, 0x04); - - /* ROM memory cycles go to LPC. */ - pci_write_config8(dev, 0x59, 0x80); - - /* - * Bit | Meaning - * ------------- - * 3 | Bypass APIC De-Assert Message (1=Enable) - * 2 | APIC HyperTransport Mode (1=Enable) - * 1 | possibly "INTE#, INTF#, INTG#, INTH# as PCI" - * | bit 1=1 works for Aaron at VIA, bit 1=0 works for jakllsch - * 0 | Dynamic Clock Gating Main Switch (1=Enable) - */ - pci_write_config8(dev, 0x5b, 0x9); - - /* Set 0x58 to 0x42 APIC On and RTC Write Protect.*/ - pci_write_config8(dev, 0x58, 0x42); - - /* Enable serial IRQ, 6PCI clocks. */ - pci_write_config8(dev, 0x52, 0x9); -#else - /* I/O recovery time, default IDE routing */ - pci_write_config8(dev, 0x4c, 0x44); - - /* ROM memory cycles go to LPC. */ - pci_write_config8(dev, 0x59, 0x80); - - /* - * Bit | Meaning - * ------------- - * 3 | Bypass APIC De-Assert Message (1=Enable) - * 2 | APIC HyperTransport Mode (1=Enable) - * 1 | possibly "INTE#, INTF#, INTG#, INTH# as PCI" - * | bit 1=1 works for Aaron at VIA, bit 1=0 works for jakllsch - * 0 | Dynamic Clock Gating Main Switch (1=Enable) - */ - if (cfg && cfg->int_efgh_as_gpio) { - pci_write_config8(dev, 0x5b, 0x9); - } else { - pci_write_config8(dev, 0x5b, 0xb); - } - - /* configure power state of the board after loss of power */ - if (get_option(&pwr_on, "power_on_after_fail") != CB_SUCCESS) - pwr_on = 1; - enables = pci_read_config8(dev, 0x58); - pci_write_config8(dev, 0x58, enables & ~0x02); - outb(0x0d, 0x70); - outb(pwr_on ? 0x00 : 0x80, 0x71); - pci_write_config8(dev, 0x58, enables); - - /* Set 0x58 to 0x43 APIC and RTC. */ - pci_write_config8(dev, 0x58, 0x43); - - /* Enable serial IRQ, 6PCI clocks. */ - pci_write_config8(dev, 0x52, 0x9); -#endif -#if IS_ENABLED(CONFIG_HAVE_SMI_HANDLER) - smm_lock(); -#endif - - /* Power management setup */ - setup_pm(dev); - - /* Start the RTC. */ - cmos_init(0); -} - -static void vt8237r_read_resources(struct device *dev) -{ - struct resource *res; - - pci_dev_read_resources(dev); - - /* Fixed ACPI Base IO Base*/ - res = new_resource(dev, 0x88); - res->base = VT8237R_ACPI_IO_BASE; - res->size = 128; - res->limit = 0xffffUL; - res->flags = IORESOURCE_IO | IORESOURCE_FIXED | IORESOURCE_RESERVE | - IORESOURCE_STORED | IORESOURCE_ASSIGNED; - - /* Fixed EISA ECLR I/O Regs */ - res = new_resource(dev, 3); - res->base = 0x4d0; - res->size = 2; - res->limit = 0xffffUL; - res->flags = IORESOURCE_IO | IORESOURCE_FIXED | IORESOURCE_RESERVE | - IORESOURCE_STORED | IORESOURCE_ASSIGNED; - - /* Fixed System Management Bus I/O Resource */ - res = new_resource(dev, 0xD0); - res->base = VT8237R_SMBUS_IO_BASE; - res->size = 16; - res->limit = 0xffffUL; - res->flags = IORESOURCE_IO | IORESOURCE_FIXED | IORESOURCE_RESERVE | - IORESOURCE_STORED | IORESOURCE_ASSIGNED; - - /* Fixed APIC resource */ - res = new_resource(dev, 0x44); - res->base = IO_APIC_ADDR; - res->size = 256; - res->limit = 0xffffffffUL; - res->align = 8; - res->gran = 8; - res->flags = IORESOURCE_MEM | IORESOURCE_FIXED | IORESOURCE_RESERVE | - IORESOURCE_STORED | IORESOURCE_ASSIGNED; - - /* Fixed flashrom resource */ - res = new_resource(dev, 4); - res->base = 0xff000000UL; - res->size = 0x01000000UL; /* 16MB */ - res->limit = 0xffffffffUL; - res->flags = IORESOURCE_MEM | IORESOURCE_FIXED | IORESOURCE_RESERVE | - IORESOURCE_STORED | IORESOURCE_ASSIGNED; - - res = new_resource(dev, 1); - res->base = 0x0UL; - res->size = 0x1000UL; - res->limit = 0xffffUL; - res->flags = IORESOURCE_IO | IORESOURCE_ASSIGNED | IORESOURCE_FIXED; -} - -static void init_keyboard(struct device *dev) -{ - u8 regval = pci_read_config8(dev, 0x51); - if (regval & 0x1) - pc_keyboard_init(NO_AUX_DEVICE); -} - -static void southbridge_init_common(struct device *dev) -{ - vt8237_common_init(dev); - pci_routing_fixup(dev); - setup_ioapic(VIO_APIC_VADDR, VT8237R_APIC_ID); - setup_i8259(); - init_keyboard(dev); -} - - -static void vt8237_set_subsystem(struct device *dev, unsigned vendor, - unsigned device) -{ - pci_write_config16(dev, 0x70, vendor); - pci_write_config16(dev, 0x72, device); -} - -static struct pci_operations lops_pci = { - .set_subsystem = vt8237_set_subsystem, -}; - -static const struct device_operations vt8237r_lpc_ops_s = { - .read_resources = vt8237r_read_resources, - .set_resources = pci_dev_set_resources, - .enable_resources = pci_dev_enable_resources, - .init = vt8237s_init, - .scan_bus = scan_lpc_bus, - .ops_pci = &lops_pci, -}; - -static const struct device_operations vt8237r_lpc_ops_r = { - .read_resources = vt8237r_read_resources, - .set_resources = pci_dev_set_resources, - .enable_resources = pci_dev_enable_resources, - .init = vt8237r_init, - .scan_bus = scan_lpc_bus, - .ops_pci = &lops_pci, -}; - -static const struct device_operations vt8237r_lpc_ops_a = { - .read_resources = vt8237r_read_resources, - .set_resources = pci_dev_set_resources, - .enable_resources = pci_dev_enable_resources, - .init = vt8237a_init, - .scan_bus = scan_lpc_bus, - .ops_pci = &lops_pci, -}; - -static const struct pci_driver lpc_driver_r __pci_driver = { - .ops = &vt8237r_lpc_ops_r, - .vendor = PCI_VENDOR_ID_VIA, - .device = PCI_DEVICE_ID_VIA_VT8237R_LPC, -}; - -static const struct pci_driver lpc_driver_a __pci_driver = { - .ops = &vt8237r_lpc_ops_a, - .vendor = PCI_VENDOR_ID_VIA, - .device = PCI_DEVICE_ID_VIA_VT8237A_LPC, -}; - -static const struct pci_driver lpc_driver_s __pci_driver = { - .ops = &vt8237r_lpc_ops_s, - .vendor = PCI_VENDOR_ID_VIA, - .device = PCI_DEVICE_ID_VIA_VT8237S_LPC, -}; -- cgit v1.2.3