From cbcbb6767e24c2568bb6444df8dfafdeec019ef4 Mon Sep 17 00:00:00 2001 From: Angel Pons Date: Fri, 23 Oct 2020 00:11:26 +0200 Subject: sb/intel/lynxpoint: Ensure that `dev->chip_info` is not null Use either a regular null check or `config_of` to avoid bugs. Change-Id: I36a01b898c3e62423f27c2940b5f875b73e36950 Signed-off-by: Angel Pons Reviewed-on: https://review.coreboot.org/c/coreboot/+/46665 Reviewed-by: Nico Huber Tested-by: build bot (Jenkins) --- src/southbridge/intel/lynxpoint/fadt.c | 2 +- src/southbridge/intel/lynxpoint/lpc.c | 48 ++++++++++++++++-------------- src/southbridge/intel/lynxpoint/serialio.c | 2 +- src/southbridge/intel/lynxpoint/usb_xhci.c | 2 +- 4 files changed, 28 insertions(+), 26 deletions(-) (limited to 'src/southbridge/intel') diff --git a/src/southbridge/intel/lynxpoint/fadt.c b/src/southbridge/intel/lynxpoint/fadt.c index 9ae6d34d3c..dee0601571 100644 --- a/src/southbridge/intel/lynxpoint/fadt.c +++ b/src/southbridge/intel/lynxpoint/fadt.c @@ -61,7 +61,7 @@ void acpi_fill_fadt(acpi_fadt_t *fadt) ACPI_FADT_S4_RTC_WAKE | ACPI_FADT_PLATFORM_CLOCK; - if (cfg->docking_supported) + if (cfg && cfg->docking_supported) fadt->flags |= ACPI_FADT_DOCKING_SUPPORTED; fadt->x_pm1a_evt_blk.space_id = ACPI_ADDRESS_SPACE_IO; diff --git a/src/southbridge/intel/lynxpoint/lpc.c b/src/southbridge/intel/lynxpoint/lpc.c index 5108fa55b5..29cd53f703 100644 --- a/src/southbridge/intel/lynxpoint/lpc.c +++ b/src/southbridge/intel/lynxpoint/lpc.c @@ -138,10 +138,8 @@ static void pch_pirq_init(struct device *dev) } } -static void pch_gpi_routing(struct device *dev) +static void pch_gpi_routing(struct device *dev, config_t *config) { - /* Get the chip configuration */ - config_t *config = dev->chip_info; u32 reg32 = 0; /* An array would be much nicer here, or some @@ -173,8 +171,6 @@ static void pch_power_options(struct device *dev) u16 reg16; u32 reg32; const char *state; - /* Get the chip configuration */ - config_t *config = dev->chip_info; u16 pmbase = get_pmbase(); int pwr_on = CONFIG_MAINBOARD_POWER_FAILURE_STATE; int nmi_option; @@ -243,19 +239,23 @@ static void pch_power_options(struct device *dev) reg16 &= ~(1 << 10); // Disable BIOS_PCI_EXP_EN for native PME pci_write_config16(dev, GEN_PMCON_1, reg16); - /* - * Set the board's GPI routing on LynxPoint-H. - * This is done as part of GPIO configuration on LynxPoint-LP. - */ - if (pch_is_lp()) - pch_gpi_routing(dev); + if (dev->chip_info) { + config_t *config = dev->chip_info; - /* GPE setup based on device tree configuration */ - enable_all_gpe(config->gpe0_en_1, config->gpe0_en_2, - config->gpe0_en_3, config->gpe0_en_4); + /* + * Set the board's GPI routing on LynxPoint-H. + * This is done as part of GPIO configuration on LynxPoint-LP. + */ + if (pch_is_lp()) + pch_gpi_routing(dev, config); - /* SMI setup based on device tree configuration */ - enable_alt_smi(config->alt_gp_smi_en); + /* GPE setup based on device tree configuration */ + enable_all_gpe(config->gpe0_en_1, config->gpe0_en_2, + config->gpe0_en_3, config->gpe0_en_4); + + /* SMI setup based on device tree configuration */ + enable_alt_smi(config->alt_gp_smi_en); + } /* Set up power management block and determine sleep mode */ reg32 = inl(pmbase + 0x04); // PM1_CNT @@ -345,10 +345,10 @@ static void lpt_lp_pm_init(struct device *dev) /* Set RCBA CIR28 0x3A84 based on SATA port enables */ data = 0x00001005; /* Port 3 and 2 disabled */ - if ((config->sata_port_map & ((1 << 3) | (1 << 2))) == 0) + if (config && (config->sata_port_map & ((1 << 3) | (1 << 2))) == 0) data |= (1 << 24) | (1 << 26); /* Port 1 and 0 disabled */ - if ((config->sata_port_map & ((1 << 1) | (1 << 0))) == 0) + if (config && (config->sata_port_map & ((1 << 1) | (1 << 0))) == 0) data |= (1 << 20) | (1 << 18); RCBA32(0x3a84) = data; @@ -636,7 +636,6 @@ static void pch_lpc_add_gen_io_resources(struct device *dev, int reg_value, static void pch_lpc_add_io_resources(struct device *dev) { struct resource *res; - config_t *config = dev->chip_info; /* Add the default claimed IO range for the LPC device. */ res = new_resource(dev, 0); @@ -651,10 +650,13 @@ static void pch_lpc_add_io_resources(struct device *dev) pch_lpc_add_io_resource(dev, get_pmbase(), 256, PMBASE); /* LPC Generic IO Decode range. */ - pch_lpc_add_gen_io_resources(dev, config->gen1_dec, LPC_GEN1_DEC); - pch_lpc_add_gen_io_resources(dev, config->gen2_dec, LPC_GEN2_DEC); - pch_lpc_add_gen_io_resources(dev, config->gen3_dec, LPC_GEN3_DEC); - pch_lpc_add_gen_io_resources(dev, config->gen4_dec, LPC_GEN4_DEC); + if (dev->chip_info) { + config_t *config = dev->chip_info; + pch_lpc_add_gen_io_resources(dev, config->gen1_dec, LPC_GEN1_DEC); + pch_lpc_add_gen_io_resources(dev, config->gen2_dec, LPC_GEN2_DEC); + pch_lpc_add_gen_io_resources(dev, config->gen3_dec, LPC_GEN3_DEC); + pch_lpc_add_gen_io_resources(dev, config->gen4_dec, LPC_GEN4_DEC); + } } static void pch_lpc_read_resources(struct device *dev) diff --git a/src/southbridge/intel/lynxpoint/serialio.c b/src/southbridge/intel/lynxpoint/serialio.c index 4fb84a5fb9..199cf9f896 100644 --- a/src/southbridge/intel/lynxpoint/serialio.c +++ b/src/southbridge/intel/lynxpoint/serialio.c @@ -131,7 +131,7 @@ static void serialio_init_once(int acpi_mode) static void serialio_init(struct device *dev) { - struct southbridge_intel_lynxpoint_config *config = dev->chip_info; + struct southbridge_intel_lynxpoint_config *config = config_of(dev); struct resource *bar0, *bar1; int sio_index = -1; diff --git a/src/southbridge/intel/lynxpoint/usb_xhci.c b/src/southbridge/intel/lynxpoint/usb_xhci.c index a6c9eb1fc1..6a58d41a18 100644 --- a/src/southbridge/intel/lynxpoint/usb_xhci.c +++ b/src/southbridge/intel/lynxpoint/usb_xhci.c @@ -328,7 +328,7 @@ static void usb_xhci_init(struct device *dev) /* Reset ports that are disabled or * polling before returning to the OS. */ usb_xhci_reset_usb3(dev, 0); - } else if (config->xhci_default) { + } else if (config && config->xhci_default) { /* Route all ports to XHCI */ apm_control(APM_CNT_ROUTE_ALL_XHCI); } -- cgit v1.2.3