From 399b6c11efaff64cb86a879dc9047a97538e790f Mon Sep 17 00:00:00 2001 From: Arthur Heymans Date: Mon, 11 Nov 2019 19:12:57 +0100 Subject: sb/intel/i82801gx: Add common early code Remove some of the code duplication on i82801gx. x4x boards are left untouched for now since that northbridge also supports i82801jx. The order of some things has changed: - on i945 early_ich7_init is now done before the raminit - enabling the IOAPIC is done before the raminit Change-Id: Ie39549938891e17667a8819b49a78b9c71c8ec9e Signed-off-by: Arthur Heymans Reviewed-on: https://review.coreboot.org/c/coreboot/+/36754 Reviewed-by: Angel Pons Reviewed-by: HAOUAS Elyes Tested-by: build bot (Jenkins) --- src/southbridge/intel/i82801gx/early_init.c | 53 +++++++++++++++++++++++++++++ src/southbridge/intel/i82801gx/i82801gx.h | 1 + 2 files changed, 54 insertions(+) (limited to 'src/southbridge/intel') diff --git a/src/southbridge/intel/i82801gx/early_init.c b/src/southbridge/intel/i82801gx/early_init.c index 7f5f442333..0bd6198e2c 100644 --- a/src/southbridge/intel/i82801gx/early_init.c +++ b/src/southbridge/intel/i82801gx/early_init.c @@ -12,7 +12,10 @@ */ #include +#include #include +#include +#include #include "i82801gx.h" #include "chip.h" @@ -62,3 +65,53 @@ void i82801gx_setup_bars(void) pci_write_config32(d31f0, GPIOBASE, DEFAULT_GPIOBASE | 1); pci_write_config8(d31f0, GPIO_CNTL, GPIO_EN); } + +#define TCO_BASE 0x60 + +#if ENV_ROMSTAGE +void i82801gx_early_init(void) +{ + uint8_t reg8; + uint32_t reg32; + /* Setting up Southbridge. In the northbridge code. */ + printk(BIOS_DEBUG, "Setting up static southbridge registers..."); + i82801gx_setup_bars(); + + setup_pch_gpios(&mainboard_gpio_map); + printk(BIOS_DEBUG, " done.\n"); + + printk(BIOS_DEBUG, "Disabling Watchdog reboot..."); + RCBA32(GCS) = RCBA32(GCS) | (1 << 5); /* No reset */ + write_pmbase16(TCO_BASE + 0x8, (1 << 11)); /* halt timer */ + write_pmbase16(TCO_BASE + 0x4, (1 << 3)); /* clear timeout */ + write_pmbase16(TCO_BASE + 0x6, (1 << 1)); /* clear 2nd timeout */ + printk(BIOS_DEBUG, " done.\n"); + + /* program secondary mlt XXX byte? */ + pci_write_config8(PCI_DEV(0, 0x1e, 0), SMLT, 0x20); + + /* reset rtc power status */ + reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), GEN_PMCON_3); + reg8 &= ~RTC_BATTERY_DEAD; + pci_write_config8(PCI_DEV(0, 0x1f, 0), GEN_PMCON_3, reg8); + + /* usb transient disconnect */ + reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xad); + reg8 |= (3 << 0); + pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xad, reg8); + + reg32 = pci_read_config32(PCI_DEV(0, 0x1d, 7), 0xfc); + reg32 |= (1 << 29) | (1 << 17); + pci_write_config32(PCI_DEV(0, 0x1d, 7), 0xfc, reg32); + + reg32 = pci_read_config32(PCI_DEV(0, 0x1d, 7), 0xdc); + reg32 |= (1 << 31) | (1 << 27); + pci_write_config32(PCI_DEV(0, 0x1d, 7), 0xdc, reg32); + + /* Enable IOAPIC */ + RCBA8(OIC) = 0x03; + RCBA8(OIC); + + ich7_setup_cir(); +} +#endif diff --git a/src/southbridge/intel/i82801gx/i82801gx.h b/src/southbridge/intel/i82801gx/i82801gx.h index 9eea262997..3d27faafad 100644 --- a/src/southbridge/intel/i82801gx/i82801gx.h +++ b/src/southbridge/intel/i82801gx/i82801gx.h @@ -42,6 +42,7 @@ void i82801gx_enable(struct device *dev); void enable_smbus(void); void i82801gx_lpc_setup(void); void i82801gx_setup_bars(void); +void i82801gx_early_init(void); #if ENV_ROMSTAGE int smbus_read_byte(unsigned int device, unsigned int address); -- cgit v1.2.3