From 18af4d23f6b17827dda50d17d8dc9da5b2656eef Mon Sep 17 00:00:00 2001 From: Duncan Laurie Date: Wed, 19 Dec 2012 13:17:06 -0800 Subject: lynxpoint: Move a bit of generic RCBA into early_pch Rather than have to repeat this bit in every mainboard. Also, remove the reset of the RTC power status from here. We had done this in TOT for current platforms but did not carry it back to emeraldlake2 where this branched from. If we clear the status here then we don't get an event logged later which can be important for the devices that do not have a CMOS battery. Change-Id: Ia7131e9d9e7cf86228a285df652a96bcabf05260 Signed-off-by: Duncan Laurie Reviewed-on: http://review.coreboot.org/2683 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich --- src/southbridge/intel/lynxpoint/early_pch.c | 20 +++++++++++++------- 1 file changed, 13 insertions(+), 7 deletions(-) (limited to 'src/southbridge/intel/lynxpoint') diff --git a/src/southbridge/intel/lynxpoint/early_pch.c b/src/southbridge/intel/lynxpoint/early_pch.c index d0a583fa1b..848eb56262 100644 --- a/src/southbridge/intel/lynxpoint/early_pch.c +++ b/src/southbridge/intel/lynxpoint/early_pch.c @@ -31,6 +31,15 @@ #include "gpio.h" #endif +const struct rcba_config_instruction pch_early_config[] = { + /* Enable IOAPIC */ + RCBA_SET_REG_16(OIC, 0x0100), + /* PCH BWG says to read back the IOAPIC enable register */ + RCBA_READ_REG_16(OIC), + + RCBA_END_CONFIG, +}; + static void pch_enable_bars(void) { /* Setting up Southbridge. In the northbridge code. */ @@ -48,17 +57,10 @@ static void pch_enable_bars(void) static void pch_generic_setup(void) { - u8 reg8; - printk(BIOS_DEBUG, "Disabling Watchdog reboot..."); RCBA32(GCS) = RCBA32(GCS) | (1 << 5); /* No reset */ outw((1 << 11), DEFAULT_PMBASE | 0x60 | 0x08); /* halt timer */ printk(BIOS_DEBUG, " done.\n"); - - // reset rtc power status - reg8 = pci_read_config8(PCH_LPC_DEV, GEN_PMCON_3); - reg8 &= ~(1 << 2); - pci_write_config8(PCH_LPC_DEV, GEN_PMCON_3, reg8); } static int sleep_type_s3(void) @@ -158,6 +160,10 @@ int early_pch_init(const void *gpio_map, /* Enable SMBus for reading SPDs. */ enable_smbus(); + /* Early PCH RCBA settings */ + pch_config_rcba(pch_early_config); + + /* Mainboard RCBA settings */ pch_config_rcba(rcba_config); wake_from_s3 = sleep_type_s3(); -- cgit v1.2.3