From 76c3700f02f79b49fec30d6ef18d336f122cbf50 Mon Sep 17 00:00:00 2001
From: Aaron Durbin <adurbin@chromium.org>
Date: Tue, 30 Oct 2012 09:03:43 -0500
Subject: haswell: Add initial support for Haswell platforms

The Haswell parts use a PCH code named Lynx Point (Series 8). Therefore,
the southbridge support is included as well. The basis for this code is
the Sandybridge code. Management Engine, IRQ routing, and ACPI still requires
more attention, but this is a good starting point.

This code partially gets up through the romstage just before training
memory on a Haswell reference board.

Change-Id: If572d6c21ca051b486b82a924ca0ffe05c4d0ad4
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/2616
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
---
 src/southbridge/intel/lynxpoint/Makefile.inc | 71 ++++++++++++++++++++++++++++
 1 file changed, 71 insertions(+)
 create mode 100644 src/southbridge/intel/lynxpoint/Makefile.inc

(limited to 'src/southbridge/intel/lynxpoint/Makefile.inc')

diff --git a/src/southbridge/intel/lynxpoint/Makefile.inc b/src/southbridge/intel/lynxpoint/Makefile.inc
new file mode 100644
index 0000000000..d4522c35fd
--- /dev/null
+++ b/src/southbridge/intel/lynxpoint/Makefile.inc
@@ -0,0 +1,71 @@
+##
+## This file is part of the coreboot project.
+##
+## Copyright (C) 2010 Google Inc.
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; version 2 of the License.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+##
+
+# Run an intermediate step when producing coreboot.rom
+# that adds additional components to the final firmware
+# image outside of CBFS
+# FIXME, uncomment as soon as we have ME firmware in the blobs repo
+# INTERMEDIATE:=lynxpoint_add_me
+
+ramstage-y += pch.c
+ramstage-y += azalia.c
+ramstage-y += lpc.c
+ramstage-y += pci.c
+ramstage-y += pcie.c
+ramstage-y += sata.c
+ramstage-y += usb_ehci.c
+ramstage-y += me_9.x.c
+ramstage-y += smbus.c
+
+ramstage-y += me_status.c
+ramstage-y += reset.c
+ramstage-y += watchdog.c
+ramstage-y += acpi.c
+
+ramstage-$(CONFIG_ELOG) += elog.c
+ramstage-y += spi.c
+smm-$(CONFIG_SPI_FLASH_SMM) += spi.c
+
+ramstage-$(CONFIG_HAVE_SMI_HANDLER) += smi.c
+smm-$(CONFIG_HAVE_SMI_HANDLER) += smihandler.c me_9.x.c finalize.c
+
+romstage-y += early_usb.c early_smbus.c early_me.c me_status.c gpio.c
+romstage-$(CONFIG_USBDEBUG) += usb_debug.c
+romstage-y += reset.c early_spi.c
+
+lynxpoint_add_me: $(obj)/coreboot.pre $(IFDTOOL)
+	printf "    DD         Adding Intel Firmware Descriptor\n"
+	dd if=3rdparty/mainboard/$(MAINBOARDDIR)/descriptor.bin \
+		of=$(obj)/coreboot.pre conv=notrunc >/dev/null 2>&1
+	printf "    IFDTOOL    me.bin -> coreboot.pre\n"
+	$(objutil)/ifdtool/ifdtool \
+		-i ME:3rdparty/mainboard/$(MAINBOARDDIR)/me.bin \
+		$(obj)/coreboot.pre
+	mv $(obj)/coreboot.pre.new $(obj)/coreboot.pre
+ifeq ($(CONFIG_LOCK_MANAGEMENT_ENGINE),y)
+	printf "    IFDTOOL    Locking Management Engine\n"
+	$(objutil)/ifdtool/ifdtool -l $(obj)/coreboot.pre
+	mv $(obj)/coreboot.pre.new $(obj)/coreboot.pre
+else
+	printf "    IFDTOOL    Unlocking Management Engine\n"
+	$(objutil)/ifdtool/ifdtool -u $(obj)/coreboot.pre
+	mv $(obj)/coreboot.pre.new $(obj)/coreboot.pre
+endif
+
+PHONY += lynxpoint_add_me
-- 
cgit v1.2.3