From 3efcd2eeee8b3c68996cbe763685117eff483c08 Mon Sep 17 00:00:00 2001 From: Stefan Reinauer Date: Wed, 28 Oct 2015 18:01:22 -0700 Subject: Drop southbridge intel/i82801cx All boards using this southbridge have been removed from the tree already. Change-Id: I08269931d845d1f57b34174238bcce245ad77894 Signed-off-by: Stefan Reinauer Reviewed-on: http://review.coreboot.org/12237 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich --- src/southbridge/intel/i82801cx/i82801cx.h | 74 ------------------------------- 1 file changed, 74 deletions(-) delete mode 100644 src/southbridge/intel/i82801cx/i82801cx.h (limited to 'src/southbridge/intel/i82801cx/i82801cx.h') diff --git a/src/southbridge/intel/i82801cx/i82801cx.h b/src/southbridge/intel/i82801cx/i82801cx.h deleted file mode 100644 index f196fa324f..0000000000 --- a/src/southbridge/intel/i82801cx/i82801cx.h +++ /dev/null @@ -1,74 +0,0 @@ -#ifndef I82801CX_H -#define I82801CX_H - -#if !defined(__PRE_RAM__) -#include -void i82801cx_enable(device_t dev); -#endif - - -#define PCI_DMA_CFG 0x90 -#define SERIRQ_CNTL 0x64 -#define GEN_CNTL 0xd0 -#define GEN_STS 0xd4 -#define RTC_CONF 0xd8 -#define GEN_PMCON_3 0xa4 - -#define PMBASE 0x40 -#define ACPI_CNTL 0x44 -#define BIOS_CNTL 0x4E -#define GPIO_BASE 0x58 -#define GPIO_CNTL 0x5C -#define PIRQA_ROUT 0x60 -#define PIRQE_ROUT 0x68 -#define COM_DEC 0xE0 -#define LPC_EN 0xE6 -#define FUNC_DIS 0xF2 - -// GEN_PMCON_3 bits -#define RTC_BATTERY_DEAD (1<<2) -#define RTC_POWER_FAILED (1<<1) -#define SLEEP_AFTER_POWER_FAIL (1<<0) - -/* IDE controller: */ - -// PCI Configuration Space (D31:F1) -#define IDE_TIM_PRI 0x40 // IDE timings, primary -#define IDE_TIM_SEC 0x42 // IDE timings, secondary - - -// IDE_TIM bits -#define IDE_DECODE_ENABLE (1<<15) - -/* SMBus: */ - -// PCI Configuration Space (D31:F3) -#define SMB_BASE 0x20 -#define HOSTC 0x40 - -// HOSTC bits -#define I2C_EN (1<<2) -#define SMB_SMI_EN (1<<1) -#define HST_EN (1<<0) - -#define SMBUS_IO_BASE 0x1000 - -// I/O registers (relative to SMBUS_IO_BASE) -#define SMBHSTSTAT 0 -#define SMBHSTCTL 2 -#define SMBHSTCMD 3 -#define SMBXMITADD 4 -#define SMBHSTDAT0 5 -#define SMBHSTDAT1 6 -#define SMBBLKDAT 7 -#define SMBTRNSADD 9 -#define SMBSLVDATA 10 -#define SMLINK_PIN_CTL 14 -#define SMBUS_PIN_CTL 15 - -/* Between 1-10 seconds, We should never timeout normally - * Longer than this is just painful when a timeout condition occurs. - */ -#define SMBUS_TIMEOUT (100*1000) - -#endif /* I82801CX_H */ -- cgit v1.2.3