From bde6d309dfafe58732ec46314a2d4c08974b62d4 Mon Sep 17 00:00:00 2001 From: Kevin Paul Herbert Date: Wed, 24 Dec 2014 18:43:20 -0800 Subject: x86: Change MMIO addr in readN(addr)/writeN(addr, val) to pointer On x86, change the type of the address parameter in read8()/read16/read32()/write8()/write16()/write32() to be a pointer, instead of unsigned long. Change-Id: Ic26dd8a72d82828b69be3c04944710681b7bd330 Signed-off-by: Kevin Paul Herbert Signed-off-by: Alexandru Gagniuc Reviewed-on: http://review.coreboot.org/7784 Tested-by: build bot (Jenkins) --- src/southbridge/intel/bd82x6x/lpc.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'src/southbridge/intel/bd82x6x/lpc.c') diff --git a/src/southbridge/intel/bd82x6x/lpc.c b/src/southbridge/intel/bd82x6x/lpc.c index 11b765adc6..c323f738fc 100644 --- a/src/southbridge/intel/bd82x6x/lpc.c +++ b/src/southbridge/intel/bd82x6x/lpc.c @@ -59,17 +59,17 @@ static void pch_enable_ioapic(struct device *dev) /* Enable ACPI I/O range decode */ pci_write_config8(dev, ACPI_CNTL, ACPI_EN); - set_ioapic_id(IO_APIC_ADDR, 0x02); + set_ioapic_id(VIO_APIC_VADDR, 0x02); /* affirm full set of redirection table entries ("write once") */ - reg32 = io_apic_read(IO_APIC_ADDR, 0x01); - io_apic_write(IO_APIC_ADDR, 0x01, reg32); + reg32 = io_apic_read(VIO_APIC_VADDR, 0x01); + io_apic_write(VIO_APIC_VADDR, 0x01, reg32); /* * Select Boot Configuration register (0x03) and * use Processor System Bus (0x01) to deliver interrupts. */ - io_apic_write(IO_APIC_ADDR, 0x03, 0x01); + io_apic_write(VIO_APIC_VADDR, 0x03, 0x01); } static void pch_enable_serial_irqs(struct device *dev) -- cgit v1.2.3