From 1088bbff4503df7e8507aae45da823268262ca8f Mon Sep 17 00:00:00 2001 From: Zheng Bao Date: Tue, 16 Mar 2010 01:41:14 +0000 Subject: Features supported in RS780 code: * PCIe initialization. * Internal Graphics initialization. * HT Link initialization. It works in HT1 or HT3 mode. Note: 1. I tried to add the description of every step to the code. For example, if it is made based on rpr, section 2.4.5, I will pasted the words from 2.4.5 to the c code. But the document I worked with might be different with the most updated one. A new section has been added and the 2.4.5 might be changed to 2.5.5. That migh lead to confusing. I correct every comment if I met one. But I have to confess that I am so reluctant to find out everyone. I believe it will be correct in the long run. 2. The interanl graphics part is done by Libo Feng . 3. There is a conflict between RPR and our CIM code. Please see the comment in switching_gppsb_configurations in rs780_pcie.c. Signed-off-by: Zheng Bao Acked-by: Marc Jones git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5219 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/southbridge/amd/rs780/Config.lb | 27 + src/southbridge/amd/rs780/Kconfig | 22 + src/southbridge/amd/rs780/Makefile.inc | 5 + src/southbridge/amd/rs780/chip.h | 40 + src/southbridge/amd/rs780/rs780.c | 356 ++++++++ src/southbridge/amd/rs780/rs780.h | 211 +++++ src/southbridge/amd/rs780/rs780_cmn.c | 353 ++++++++ src/southbridge/amd/rs780/rs780_early_setup.c | 668 ++++++++++++++ src/southbridge/amd/rs780/rs780_gfx.c | 1194 +++++++++++++++++++++++++ src/southbridge/amd/rs780/rs780_ht.c | 90 ++ src/southbridge/amd/rs780/rs780_pcie.c | 449 ++++++++++ src/southbridge/amd/rs780/rs780_rev.h | 27 + 12 files changed, 3442 insertions(+) create mode 100644 src/southbridge/amd/rs780/Config.lb create mode 100644 src/southbridge/amd/rs780/Kconfig create mode 100644 src/southbridge/amd/rs780/Makefile.inc create mode 100644 src/southbridge/amd/rs780/chip.h create mode 100644 src/southbridge/amd/rs780/rs780.c create mode 100644 src/southbridge/amd/rs780/rs780.h create mode 100644 src/southbridge/amd/rs780/rs780_cmn.c create mode 100644 src/southbridge/amd/rs780/rs780_early_setup.c create mode 100644 src/southbridge/amd/rs780/rs780_gfx.c create mode 100644 src/southbridge/amd/rs780/rs780_ht.c create mode 100644 src/southbridge/amd/rs780/rs780_pcie.c create mode 100644 src/southbridge/amd/rs780/rs780_rev.h (limited to 'src/southbridge/amd') diff --git a/src/southbridge/amd/rs780/Config.lb b/src/southbridge/amd/rs780/Config.lb new file mode 100644 index 0000000000..56b3dea059 --- /dev/null +++ b/src/southbridge/amd/rs780/Config.lb @@ -0,0 +1,27 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2010 Advanced Micro Devices, Inc. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## +## +## + +config chip.h +driver rs780_cmn.o +driver rs780.o +driver rs780_pcie.o +driver rs780_ht.o +driver rs780_gfx.o diff --git a/src/southbridge/amd/rs780/Kconfig b/src/southbridge/amd/rs780/Kconfig new file mode 100644 index 0000000000..ed7c9de8a7 --- /dev/null +++ b/src/southbridge/amd/rs780/Kconfig @@ -0,0 +1,22 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2010 Advanced Micro Devices, Inc. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +config SOUTHBRIDGE_AMD_RS780 + bool + diff --git a/src/southbridge/amd/rs780/Makefile.inc b/src/southbridge/amd/rs780/Makefile.inc new file mode 100644 index 0000000000..3d6fad10e3 --- /dev/null +++ b/src/southbridge/amd/rs780/Makefile.inc @@ -0,0 +1,5 @@ +driver-y += rs780.o +driver-y += rs780_cmn.o +driver-y += rs780_pcie.o +driver-y += rs780_ht.o +driver-y += rs780_gfx.o diff --git a/src/southbridge/amd/rs780/chip.h b/src/southbridge/amd/rs780/chip.h new file mode 100644 index 0000000000..fa72a01e31 --- /dev/null +++ b/src/southbridge/amd/rs780/chip.h @@ -0,0 +1,40 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef RS780_CHIP_H +#define RS780_CHIP_H + +/* Member variables are defined in Config.lb. */ +struct southbridge_amd_rs780_config +{ + u8 gppsb_configuration; /* The configuration of General Purpose Port, A/B/C/D/E. */ + u8 gpp_configuration; /* The configuration of General Purpose Port, C/D. */ + u16 port_enable; /* Which port is enabled? GFX(2,3), GPP(4,5,6,7) */ + u8 gfx_dev2_dev3; /* for GFX Core initialization REFCLK_SEL */ + u8 gfx_dual_slot; /* Is it dual graphics slots */ + u8 gfx_lane_reversal; /* Single/Dual slot lan reversal */ + u8 gfx_tmds; /* whether support TMDS? */ + u8 gfx_compliance; /* whether support compliance? */ + u8 gfx_reconfiguration; /* Dynamic Lind Width Control */ + u8 gfx_link_width; /* Desired width of lane 2 */ +}; +struct chip_operations; +extern struct chip_operations southbridge_amd_rs780_ops; + +#endif /* RS780_CHIP_H */ diff --git a/src/southbridge/amd/rs780/rs780.c b/src/southbridge/amd/rs780/rs780.c new file mode 100644 index 0000000000..b7ec1154ce --- /dev/null +++ b/src/southbridge/amd/rs780/rs780.c @@ -0,0 +1,356 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include "rs780.h" + +/***************************************** +* rs780_config_misc_clk() +*****************************************/ +void static rs780_config_misc_clk(device_t nb_dev) +{ + u32 reg; + u16 word; + u8 byte; + struct bus pbus; /* fake bus for dev0 fun1 */ + + reg = pci_read_config32(nb_dev, 0x4c); + reg |= 1 << 0; + pci_write_config32(nb_dev, 0x4c, reg); + + word = pci_cf8_conf1.read16(&pbus, 0, 1, 0xf8); + word &= 0xf00; + pci_cf8_conf1.write16(&pbus, 0, 1, 0xf8, word); + + word = pci_cf8_conf1.read16(&pbus, 0, 1, 0xe8); + word &= ~((1 << 12) | (1 << 13) | (1 << 14)); + word |= 1 << 13; + pci_cf8_conf1.write16(&pbus, 0, 1, 0xe8, word); + + reg = pci_cf8_conf1.read32(&pbus, 0, 1, 0x94); + reg &= ~((1 << 16) | (1 << 24) | (1 << 28)); + pci_cf8_conf1.write32(&pbus, 0, 1, 0x94, reg); + + reg = pci_cf8_conf1.read32(&pbus, 0, 1, 0x8c); + reg &= ~((1 << 13) | (1 << 14) | (1 << 24) | (1 << 25)); + reg |= 1 << 13; + pci_cf8_conf1.write32(&pbus, 0, 1, 0x8c, reg); + + reg = pci_cf8_conf1.read32(&pbus, 0, 1, 0xcc); + reg |= 1 << 24; + pci_cf8_conf1.write32(&pbus, 0, 1, 0xcc, reg); + + reg = nbmc_read_index(nb_dev, 0x7a); + reg &= ~0x3f; + reg |= 1 << 2; + reg &= ~(1 << 6); + set_htiu_enable_bits(nb_dev, 0x05, 1 << 11, 1 << 11); + nbmc_write_index(nb_dev, 0x7a, reg); + /* Powering Down efuse and strap block clocks after boot-up. GFX Mode. */ + reg = pci_cf8_conf1.read32(&pbus, 0, 1, 0xcc); + reg &= ~(1 << 23); + reg |= 1 << 24; + pci_cf8_conf1.write32(&pbus, 0, 1, 0xcc, reg); + + /* Programming NB CLK table. */ + byte = pci_cf8_conf1.read8(&pbus, 0, 1, 0xe0); + byte |= 0x01; + pci_cf8_conf1.write8(&pbus, 0, 1, 0xe0, byte); + +#if 0 + /* Powerdown reference clock to graphics core PLL in northbridge only mode */ + reg = pci_cf8_conf1.read32(&pbus, 0, 1, 0x8c); + reg |= 1 << 21; + pci_cf8_conf1.write32(&pbus, 0, 1, 0x8c, reg); + + /* Powering Down efuse and strap block clocks after boot-up. NB Only Mode. */ + reg = pci_cf8_conf1.read32(&pbus, 0, 1, 0xcc); + reg |= (1 << 23) | (1 << 24); + pci_cf8_conf1.write32(&pbus, 0, 1, 0xcc, reg); + + /* Powerdown clock to memory controller in northbridge only mode */ + byte = pci_cf8_conf1.read8(&pbus, 0, 1, 0xe4); + byte |= 1 << 0; + pci_cf8_conf1.write8(&pbus, 0, 1, 0xe4, reg); + + /* CLKCFG:0xE8 Bit[17] = 0x1 Powerdown clock to IOC GFX block in no external graphics mode */ + /* TODO: */ +#endif + + reg = pci_read_config32(nb_dev, 0x4c); + reg &= ~(1 << 0); + pci_write_config32(nb_dev, 0x4c, reg); + + set_htiu_enable_bits(nb_dev, 0x05, 7 << 8, 7 << 8); +} + +u32 get_vid_did(device_t dev) +{ + return pci_read_config32(dev, 0); +} + +void rs780_nb_pci_table(device_t nb_dev) +{ /* NBPOR_InitPOR function. */ + u8 temp8; + u16 temp16; + u32 temp32; + + /* Program NB PCI table. */ + temp16 = pci_read_config16(nb_dev, 0x04); + printk_debug("NB_PCI_REG04 = %x.\n", temp16); + temp32 = pci_read_config32(nb_dev, 0x84); + printk_debug("NB_PCI_REG84 = %x.\n", temp32); + + pci_write_config8(nb_dev, 0x4c, 0x42); + + temp8 = pci_read_config8(nb_dev, 0x4e); + temp8 |= 0x05; + pci_write_config8(nb_dev, 0x4e, temp8); + + temp32 = pci_read_config32(nb_dev, 0x4c); + printk_debug("NB_PCI_REG4C = %x.\n", temp32); + + /* disable GFX debug. */ + temp8 = pci_read_config8(nb_dev, 0x8d); + temp8 &= ~(1<<1); + pci_write_config8(nb_dev, 0x8d, temp8); + + /* set temporary NB TOM to 0x40000000. */ + rs780_set_tom(nb_dev); + + /* Program NB HTIU table. */ +#if 0 + set_htiu_enable_bits(nb_dev, 0x05, 1<<10 | 1<<9, 1<<10|1<<9); + set_htiu_enable_bits(nb_dev, 0x06, 1, 0x4203a202); + set_htiu_enable_bits(nb_dev, 0x07, 1<<1 | 1<<2, 0x8001); + set_htiu_enable_bits(nb_dev, 0x15, 0, 1<<31 | 1<<30 | 1<<27); + set_htiu_enable_bits(nb_dev, 0x1c, 0, 0xfffe0000); + set_htiu_enable_bits(nb_dev, 0x4b, 1<<11, 1<<11); + set_htiu_enable_bits(nb_dev, 0x0c, 0x3f, 1 | 1<<3); + set_htiu_enable_bits(nb_dev, 0x17, 1<<1 | 1<<27, 1<<1); + set_htiu_enable_bits(nb_dev, 0x17, 0, 1<<30); + set_htiu_enable_bits(nb_dev, 0x19, 0xfffff+(1<<31), 0x186a0+(1<<31)); + set_htiu_enable_bits(nb_dev, 0x16, 0x3f<<10, 0x7<<10); + set_htiu_enable_bits(nb_dev, 0x23, 0, 1<<28); + + /* Program NB MISC table. */ + set_nbmisc_enable_bits(nb_dev, 0x0b, 0xffff, 0x00000180); + set_nbmisc_enable_bits(nb_dev, 0x00, 0xffff, 0x00000106); + set_nbmisc_enable_bits(nb_dev, 0x51, 0xffffffff, 0x00100100); + set_nbmisc_enable_bits(nb_dev, 0x53, 0xffffffff, 0x00100100); + set_nbmisc_enable_bits(nb_dev, 0x55, 0xffffffff, 0x00100100); + set_nbmisc_enable_bits(nb_dev, 0x57, 0xffffffff, 0x00100100); + set_nbmisc_enable_bits(nb_dev, 0x59, 0xffffffff, 0x00100100); + set_nbmisc_enable_bits(nb_dev, 0x5b, 0xffffffff, 0x00100100); + set_nbmisc_enable_bits(nb_dev, 0x5d, 0xffffffff, 0x00100100); + set_nbmisc_enable_bits(nb_dev, 0x5f, 0xffffffff, 0x00100100); + set_nbmisc_enable_bits(nb_dev, 0x20, 1<<1, 0); + set_nbmisc_enable_bits(nb_dev, 0x37, 1<<11|1<<12|1<<13|1<<26, 0); + set_nbmisc_enable_bits(nb_dev, 0x68, 1<<5|1<<6, 1<<5); + set_nbmisc_enable_bits(nb_dev, 0x6b, 1<<22, 1<<10); + set_nbmisc_enable_bits(nb_dev, 0x67, 1<<26, 1<<14|1<<10); + set_nbmisc_enable_bits(nb_dev, 0x24, 1<<28|1<<26|1<<25|1<<16, 1<<29|1<<25); + set_nbmisc_enable_bits(nb_dev, 0x38, 1<<24|1<<25, 1<<24); + set_nbmisc_enable_bits(nb_dev, 0x36, 1<<29, 1<<29|1<<28); + set_nbmisc_enable_bits(nb_dev, 0x0c, 0, 1<<13); + set_nbmisc_enable_bits(nb_dev, 0x34, 1<<22, 1<<10); + set_nbmisc_enable_bits(nb_dev, 0x39, 1<<10, 1<<30); + set_nbmisc_enable_bits(nb_dev, 0x22, 1<<3, 0); + set_nbmisc_enable_bits(nb_dev, 0x68, 1<<19, 0); + set_nbmisc_enable_bits(nb_dev, 0x24, 1<<16|1<<17, 1<<17); + set_nbmisc_enable_bits(nb_dev, 0x6a, 1<<22|1<<23, 1<<17|1<<23); + set_nbmisc_enable_bits(nb_dev, 0x35, 1<<21|1<<22, 1<<22); + set_nbmisc_enable_bits(nb_dev, 0x01, 0xffffffff, 0x48); + + /* the last two step. */ + set_nbmisc_enable_bits(nb_dev, 0x01, 1<<8, 1<<8); + set_htiu_enable_bits(nb_dev, 0x2d, 1<<6|1<<4, 1<<6|1<<4); +#endif +} + +void rs780_nb_gfx_dev_table(device_t nb_dev, device_t dev) +{ + /* NB_InitGFXStraps */ + u32 MMIOBase, apc04, apc18, apc24; + volatile u32 * strap; + + /* Get PCIe configuration space. */ + MMIOBase = pci_read_config32(nb_dev, 0x1c) & 0xfffffff0; + /* Temporarily disable PCIe configuration space. */ + set_htiu_enable_bits(nb_dev, 0x32, 1<<28, 0); + + set_nbmisc_enable_bits(nb_dev, 0x1e, 0xffffffff, 1<<1 | 1<<4 | 1<<6 | 1<<7); + /* Set a temporary Bus number. */ + apc18 = pci_read_config32(dev, 0x18); + pci_write_config32(dev, 0x18, 0x010100); + /* Set MMIO for AGP target(graphics controller). base = 0xe0000000, limit = 0x20000 */ + apc24 = pci_read_config32(dev, 0x24); + pci_write_config32(dev, 0x24, (MMIOBase>>16)+((MMIOBase+0x20000)&0xffff0000)); + /* Enable memory access. */ + apc04 = pci_read_config32(dev, 0x04); + pci_write_config8(dev, 0x04, 0x02); + + /* Program Straps. */ + strap = MMIOBase + 0x15020; +#if (CONFIG_GFXUMA == 1) + *strap = 1<<7; /* the format of BIF_MEM_AP_SIZE. 001->256MB? */ +#else + *strap = 0; /* 128M SP memory, 000 -> 128MB */ +#endif + strap = MMIOBase + 0x15000; + *strap = 0x2c006300; + strap = MMIOBase + 0x15010; + *strap = 0x03015330; + //strap = MMIOBase + 0x15020; + //*strap |= 0x00000040; /* Disable HDA device. */ + strap = MMIOBase + 0x15030; + *strap = 0x00001002; + strap = MMIOBase + 0x15040; + *strap = 0x00000000; + strap = MMIOBase + 0x15050; + *strap = 0x00000000; + strap = MMIOBase + 0x15220; + *strap = 0x03c03800; + strap = MMIOBase + 0x15060; + *strap = 0x00000000; + + /* BIF switches into normal functional mode. */ + set_nbmisc_enable_bits(nb_dev, 0x1e, 1<<4 | 1<<5, 1<<5); + + /* NB Revision is A12. */ + set_nbmisc_enable_bits(nb_dev, 0x1e, 1<<9, 1<<9); + + /* Restore APC04, APC18, APC24. */ + pci_write_config32(dev, 0x04, apc04); + pci_write_config32(dev, 0x18, apc18); + pci_write_config32(dev, 0x24, apc24); + + /* Enable PCIe configuration space. */ + set_htiu_enable_bits(nb_dev, 0x32, 0, 1<<28); + printk_info("GC is accessible from now on.\n"); +} + +/*********************************************** +* 0:00.0 NBCFG : +* 0:00.1 CLK : bit 0 of nb_cfg 0x4c : 0 - disable, default +* 0:01.0 P2P Internal: +* 0:02.0 P2P : bit 2 of nbmiscind 0x0c : 0 - enable, default + 32 * 2 +* 0:03.0 P2P : bit 3 of nbmiscind 0x0c : 0 - enable, default + 32 * 2 +* 0:04.0 P2P : bit 4 of nbmiscind 0x0c : 0 - enable, default + 32 * 2 +* 0:05.0 P2P : bit 5 of nbmiscind 0x0c : 0 - enable, default + 32 * 2 +* 0:06.0 P2P : bit 6 of nbmiscind 0x0c : 0 - enable, default + 32 * 2 +* 0:07.0 P2P : bit 7 of nbmiscind 0x0c : 0 - enable, default + 32 * 2 +* 0:08.0 NB2SB : bit 6 of nbmiscind 0x00 : 0 - disable, default + 32 * 1 +* case 0 will be called twice, one is by cpu in hypertransport.c line458, +* the other is by rs780. +***********************************************/ +void rs780_enable(device_t dev) +{ + device_t nb_dev = 0, sb_dev = 0; + int dev_ind; + + printk_info("rs780_enable: dev=%p, VID_DID=0x%x\n", dev, get_vid_did(dev)); + + nb_dev = dev_find_slot(0, PCI_DEVFN(0, 0)); + if (!nb_dev) { + die("rs780_enable: CAN NOT FIND RS780 DEVICE, HALT!\n"); + /* NOT REACHED */ + } + + /* sb_dev (dev 8) is a bridge that links to southbridge. */ + sb_dev = dev_find_slot(0, PCI_DEVFN(8, 0)); + if (!sb_dev) { + die("rs780_enable: CAN NOT FIND SB bridge, HALT!\n"); + /* NOT REACHED */ + } + + dev_ind = dev->path.pci.devfn >> 3; + switch (dev_ind) { + case 0: /* bus0, dev0, fun0; */ + printk_info("Bus-0, Dev-0, Fun-0.\n"); + enable_pcie_bar3(nb_dev); /* PCIEMiscInit */ + config_gpp_core(nb_dev, sb_dev); + rs780_gpp_sb_init(nb_dev, sb_dev, 8); + /* 5.10.8.4. set SB payload size: 64byte */ + set_pcie_enable_bits(nb_dev, 0x10 | PCIE_CORE_INDEX_GPPSB, 3 << 11, 2 << 11); + + /* Bus0Dev0Fun1Clock control init, we have to do it here, for dev0 Fun1 doesn't have a vendor or device ID */ + rs780_config_misc_clk(nb_dev); + + rs780_nb_pci_table(nb_dev); + break; + + case 1: /* bus0, dev1, APC. */ + printk_info("Bus-0, Dev-1, Fun-0.\n"); + rs780_nb_gfx_dev_table(nb_dev, dev); + break; + case 2: /* bus0, dev2,3, two GFX */ + case 3: + printk_info("Bus-0, Dev-2,3, Fun-0. enable=%d\n", dev->enabled); + set_nbmisc_enable_bits(nb_dev, 0x0c, 1 << dev_ind, + (dev->enabled ? 0 : 1) << dev_ind); + if (dev->enabled) + rs780_gfx_init(nb_dev, dev, dev_ind); + break; + case 4: /* bus0, dev4-7, four GPPSB */ + case 5: + case 6: + case 7: + printk_info("Bus-0, Dev-4,5,6,7, Fun-0. enable=%d\n", + dev->enabled); + set_nbmisc_enable_bits(nb_dev, 0x0c, 1 << dev_ind, + (dev->enabled ? 0 : 1) << dev_ind); + if (dev->enabled) + rs780_gpp_sb_init(nb_dev, dev, dev_ind); + break; + case 8: /* bus0, dev8, SB */ + printk_info("Bus-0, Dev-8, Fun-0. enable=%d\n", dev->enabled); + set_nbmisc_enable_bits(nb_dev, 0x00, 1 << 6, + (dev->enabled ? 1 : 0) << 6); + if (dev->enabled) + rs780_gpp_sb_init(nb_dev, dev, dev_ind); + disable_pcie_bar3(nb_dev); + break; + case 9: /* bus 0, dev 9,10, GPP */ + case 10: + printk_info("Bus-0, Dev-9, 10, Fun-0. enable=%d\n", + dev->enabled); + enable_pcie_bar3(nb_dev); /* PCIEMiscInit */ + set_nbmisc_enable_bits(nb_dev, 0x0c, 1 << (7 + dev_ind), + (dev->enabled ? 0 : 1) << (7 + dev_ind)); + if (dev->enabled) + rs780_gpp_sb_init(nb_dev, dev, dev_ind); + /* Dont call disable_pcie_bar3(nb_dev) here, otherwise the screen will crash. */ + break; + default: + printk_debug("unknown dev: %s\n", dev_path(dev)); + } +} + +struct chip_operations southbridge_amd_rs780_ops = { + CHIP_NAME("ATI RS780") + .enable_dev = rs780_enable, +}; diff --git a/src/southbridge/amd/rs780/rs780.h b/src/southbridge/amd/rs780/rs780.h new file mode 100644 index 0000000000..7939303fe1 --- /dev/null +++ b/src/southbridge/amd/rs780/rs780.h @@ -0,0 +1,211 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef __RS780_H__ +#define __RS780_H__ + +#include +#include +#include "chip.h" +#include "rs780_rev.h" + +#define NBMISC_INDEX 0x60 +#define NBHTIU_INDEX 0x94 +#define NBMC_INDEX 0xE8 +#define NBPCIE_INDEX 0xE0 +#define EXT_CONF_BASE_ADDRESS 0xE0000000 +#define TEMP_MMIO_BASE_ADDRESS 0xC0000000 + +#define get_nb_rev(dev) pci_read_config8((dev), 0x89) + +typedef struct __PCIE_CFG__ { + u16 Config; + u8 ResetReleaseDelay; + u8 Gfx0Width; + u8 Gfx1Width; + u8 GfxPayload; + u8 GppPayload; + u16 PortDetect; + u8 PortHp; /* hot plug */ + u16 DbgConfig; + u32 DbgConfig2; + u8 GfxLx; + u8 GppLx; + u8 NBSBLx; + u8 PortSlotInit; + u8 Gfx0Pwr; + u8 Gfx1Pwr; + u8 GppPwr; +} PCIE_CFG; + +/* The Integrated Info Table */ +#define USHORT u16 +#define UCHAR u8 +#define ULONG u32 + +typedef struct _ATOM_COMMON_TABLE_HEADER +{ + USHORT usStructureSize; + UCHAR ucTableFormatRevision; + UCHAR ucTableContentRevision; +}ATOM_COMMON_TABLE_HEADER; + +typedef struct _ATOM_INTEGRATED_SYSTEM_INFO_V2 +{ + ATOM_COMMON_TABLE_HEADER sHeader; + ULONG ulBootUpEngineClock; //in 10kHz unit + ULONG ulReserved1[2]; //must be 0x0 for the reserved + ULONG ulBootUpUMAClock; //in 10kHz unit + ULONG ulBootUpSidePortClock; //in 10kHz unit + ULONG ulMinSidePortClock; //in 10kHz unit + ULONG ulReserved2[6]; //must be 0x0 for the reserved + ULONG ulSystemConfig; +//[0]=1: PowerExpress mode +// =0 Non-PowerExpress mode; +//[1]=1: system boots up at AMD overdrived state or user customized mode. In this case, driver will disable other power state in VBIOS table. +// =0: system boots up at driver control state. Power state depends on VBIOS PP table. +//[2]=1: PWM method is used on NB voltage control. +// =0: GPIO method is used. +//[3]=1: Only one power state(Performance) will be supported. +// =0: Number of power states supported is from VBIOS PP table. +//[4]=1: CLMC is supported and enabled on current system. +// =0: CLMC is not supported or enabled on current system. SBIOS need to support HT link/freq change through ATIF interface. +//[5]=1: Enable CDLW for all driver control power states. Max HT width is from SBIOS, while Min HT width is determined by display requirement. +// =0: CDLW is disabled. If CLMC is enabled case, Min HT width will be set equal to Max HT width. If CLMC disabled case, Max HT width will be applied. +//[6]=1: High Voltage requested for all power states. In this case, voltage will be forced at 1.1v and VBIOS PP table voltage drop/throttling request will be ignored. +// =0: Voltage settings is determined by VBIOS PP table. +//[7]=1: Enable CLMC Hybird Mode. CDLD and CILR will be disabled in this case and we're using legacy C1E. This is workaround for CPU(Griffin) performance issue. +// =0: Enable regular CLMC mode, CDLD and CILR will be enabled. +//[8]=1: CDLF is supported and enabled by fuse //CHP 914 +// =0: CDLF is not supported and not enabled by fuses + ULONG ulBootUpReqDisplayVector; + ULONG ulOtherDisplayMisc; + ULONG ulDDISlot1Config; + ULONG ulDDISlot2Config; + UCHAR ucMemoryType; //[3:0]=1:DDR1;=2:DDR2;=3:DDR3.[7:4] is reserved + UCHAR ucUMAChannelNumber; + UCHAR ucDockingPinBit; + UCHAR ucDockingPinPolarity; + ULONG ulDockingPinCFGInfo; + ULONG ulCPUCapInfo; + USHORT usNumberOfCyclesInPeriod; //usNumberOfCyclesInPeriod[15] = 0 - invert waveform + // 1 - non inverted waveform + USHORT usMaxNBVoltage; + USHORT usMinNBVoltage; + USHORT usBootUpNBVoltage; + ULONG ulHTLinkFreq; //in 10Khz + USHORT usMinHTLinkWidth; // if no CLMC, usMinHTLinkWidth should be equal to usMaxHTLinkWidth?? + USHORT usMaxHTLinkWidth; + USHORT usUMASyncStartDelay; // will be same as usK8SyncStartDelay on RS690 + USHORT usUMADataReturnTime; // will be same as usK8DataReturnTime on RS690 + USHORT usLinkStatusZeroTime; + USHORT usReserved; + ULONG ulHighVoltageHTLinkFreq; // in 10Khz + ULONG ulLowVoltageHTLinkFreq; // in 10Khz + USHORT usMaxUpStreamHTLinkWidth; + USHORT usMaxDownStreamHTLinkWidth; + USHORT usMinUpStreamHTLinkWidth; + USHORT usMinDownStreamHTLinkWidth; + ULONG ulReserved3[97]; //must be 0x0 +} ATOM_INTEGRATED_SYSTEM_INFO_V2; + +/* PCIE config flags */ +#define PCIE_DUALSLOT_CONFIG (1 << 0) +#define PCIE_OVERCLOCK_ENABLE (1 << 1) +#define PCIE_GPP_CLK_GATING (1 << 2) +#define PCIE_ENABLE_STATIC_DEV_REMAP (1 << 3) +#define PCIE_OFF_UNUSED_GFX_LANES (1 << 4) +#define PCIE_OFF_UNUSED_GPP_LANES (1 << 5) +#define PCIE_DISABLE_HIDE_UNUSED_PORTS (1 << 7) +#define PCIE_GFX_CLK_GATING (1 << 11) +#define PCIE_GFX_COMPLIANCE (1 << 14) +#define PCIE_GPP_COMPLIANCE (1 << 15) + +/* -------------------- ---------------------- +* NBMISCIND + ------------------- -----------------------*/ +#define PCIE_LINK_CFG 0x8 +#define PCIE_NBCFG_REG7 0x37 +#define STRAPS_OUTPUT_MUX_7 0x67 +#define STRAPS_OUTPUT_MUX_A 0x6a + +/* -------------------- ---------------------- +* PCIEIND + ------------------- -----------------------*/ +#define PCIE_CI_CNTL 0x20 +#define PCIE_LC_LINK_WIDTH 0xa2 +#define PCIE_LC_STATE0 0xa5 +#define PCIE_VC0_RESOURCE_STATUS 0x12a /* 16bit read only */ + +#define PCIE_CORE_INDEX_GFX (0x00 << 16) /* see 5.2.2 */ +#define PCIE_CORE_INDEX_GPPSB (0x01 << 16) +#define PCIE_CORE_INDEX_GPP (0x02 << 16) +#define PCIE_CORE_INDEX_BRDCST (0x03 << 16) + +/* contents of PCIE_NBCFG_REG7 */ +#define RECONFIG_GPPSB_EN (1 << 12) +#define RECONFIG_GPPSB_GPPSB (1 << 14) +#define RECONFIG_GPPSB_LINK_CONFIG (1 << 15) +#define RECONFIG_GPPSB_ATOMIC_RESET (1 << 17) + +/* contents of PCIE_VC0_RESOURCE_STATUS */ +#define VC_NEGOTIATION_PENDING (1 << 1) + +#define LC_STATE_RECONFIG_GPPSB 0x10 + +/* ------------------------------------------------ +* Global variable +* ------------------------------------------------- */ +extern PCIE_CFG AtiPcieCfg; + +/* ----------------- export funtions ----------------- */ +u32 nbmisc_read_index(device_t nb_dev, u32 index); +void nbmisc_write_index(device_t nb_dev, u32 index, u32 data); +u32 nbpcie_p_read_index(device_t dev, u32 index); +void nbpcie_p_write_index(device_t dev, u32 index, u32 data); +u32 nbpcie_ind_read_index(device_t nb_dev, u32 index); +void nbpcie_ind_write_index(device_t nb_dev, u32 index, u32 data); +u32 htiu_read_index(device_t nb_dev, u32 index); +void htiu_write_index(device_t nb_dev, u32 index, u32 data); +u32 nbmc_read_index(device_t nb_dev, u32 index); +void nbmc_write_index(device_t nb_dev, u32 index, u32 data); + +u32 pci_ext_read_config32(device_t nb_dev, device_t dev, u32 reg); +void pci_ext_write_config32(device_t nb_dev, device_t dev, u32 reg, u32 mask, u32 val); + +void set_nbcfg_enable_bits(device_t nb_dev, u32 reg_pos, u32 mask, u32 val); +void set_nbcfg_enable_bits_8(device_t nb_dev, u32 reg_pos, u8 mask, u8 val); +void set_nbmc_enable_bits(device_t nb_dev, u32 reg_pos, u32 mask, u32 val); +void set_htiu_enable_bits(device_t nb_dev, u32 reg_pos, u32 mask, u32 val); +void set_nbmisc_enable_bits(device_t nb_dev, u32 reg_pos, u32 mask, u32 val); +void set_pcie_enable_bits(device_t dev, u32 reg_pos, u32 mask, u32 val); +void rs780_set_tom(device_t nb_dev); + +void ProgK8TempMmioBase(u8 in_out, u32 pcie_base_add, u32 mmio_base_add); +void enable_pcie_bar3(device_t nb_dev); +void disable_pcie_bar3(device_t nb_dev); + +void rs780_enable(device_t dev); +void rs780_gpp_sb_init(device_t nb_dev, device_t dev, u32 port); +void rs780_gfx_init(device_t nb_dev, device_t dev, u32 port); +void avoid_lpc_dma_deadlock(device_t nb_dev, device_t sb_dev); +void config_gpp_core(device_t nb_dev, device_t sb_dev); +void PcieReleasePortTraining(device_t nb_dev, device_t dev, u32 port); +u8 PcieTrainPort(device_t nb_dev, device_t dev, u32 port); +#endif /* RS780_H */ diff --git a/src/southbridge/amd/rs780/rs780_cmn.c b/src/southbridge/amd/rs780/rs780_cmn.c new file mode 100644 index 0000000000..9b6ccf627d --- /dev/null +++ b/src/southbridge/amd/rs780/rs780_cmn.c @@ -0,0 +1,353 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include + +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include "rs780.h" + +static u32 nb_read_index(device_t dev, u32 index_reg, u32 index) +{ + pci_write_config32(dev, index_reg, index); + return pci_read_config32(dev, index_reg + 0x4); +} + +static void nb_write_index(device_t dev, u32 index_reg, u32 index, u32 data) +{ + pci_write_config32(dev, index_reg, index); + pci_write_config32(dev, index_reg + 0x4, data); +} + +/* extension registers */ +u32 pci_ext_read_config32(device_t nb_dev, device_t dev, u32 reg) +{ + /*get BAR3 base address for nbcfg0x1c */ + u32 addr = pci_read_config32(nb_dev, 0x1c) & ~0xF; + printk_debug("addr=%x,bus=%x,devfn=%x\n", addr, dev->bus->secondary, + dev->path.pci.devfn); + addr |= dev->bus->secondary << 20 | /* bus num */ + dev->path.pci.devfn << 12 | reg; + return *((u32 *) addr); +} + +void pci_ext_write_config32(device_t nb_dev, device_t dev, u32 reg_pos, u32 mask, u32 val) +{ + u32 reg_old, reg; + + /*get BAR3 base address for nbcfg0x1c */ + u32 addr = pci_read_config32(nb_dev, 0x1c) & ~0xF; + /*printk_debug("write: addr=%x,bus=%x,devfn=%x\n", addr, dev->bus->secondary, + dev->path.pci.devfn);*/ + addr |= dev->bus->secondary << 20 | /* bus num */ + dev->path.pci.devfn << 12 | reg_pos; + + reg = reg_old = *((u32 *) addr); + reg &= ~mask; + reg |= val; + if (reg != reg_old) { + *((u32 *) addr) = val; + } +} + +u32 nbmisc_read_index(device_t nb_dev, u32 index) +{ + return nb_read_index((nb_dev), NBMISC_INDEX, (index)); +} + +void nbmisc_write_index(device_t nb_dev, u32 index, u32 data) +{ + nb_write_index((nb_dev), NBMISC_INDEX, ((index) | 0x80), (data)); +} + +u32 nbpcie_p_read_index(device_t dev, u32 index) +{ + return nb_read_index((dev), NBPCIE_INDEX, (index)); +} + +void nbpcie_p_write_index(device_t dev, u32 index, u32 data) +{ + nb_write_index((dev), NBPCIE_INDEX, (index), (data)); +} + +u32 nbpcie_ind_read_index(device_t nb_dev, u32 index) +{ + return nb_read_index((nb_dev), NBPCIE_INDEX, (index)); +} + +void nbpcie_ind_write_index(device_t nb_dev, u32 index, u32 data) +{ + nb_write_index((nb_dev), NBPCIE_INDEX, (index), (data)); +} + +u32 htiu_read_index(device_t nb_dev, u32 index) +{ + return nb_read_index((nb_dev), NBHTIU_INDEX, (index)); +} + +void htiu_write_index(device_t nb_dev, u32 index, u32 data) +{ + nb_write_index((nb_dev), NBHTIU_INDEX, ((index) | 0x100), (data)); +} + +u32 nbmc_read_index(device_t nb_dev, u32 index) +{ + return nb_read_index((nb_dev), NBMC_INDEX, (index)); +} + +void nbmc_write_index(device_t nb_dev, u32 index, u32 data) +{ + nb_write_index((nb_dev), NBMC_INDEX, ((index) | 1 << 9), (data)); +} + +void set_nbcfg_enable_bits(device_t nb_dev, u32 reg_pos, u32 mask, u32 val) +{ + u32 reg_old, reg; + reg = reg_old = pci_read_config32(nb_dev, reg_pos); + reg &= ~mask; + reg |= val; + if (reg != reg_old) { + pci_write_config32(nb_dev, reg_pos, reg); + } +} + +void set_nbcfg_enable_bits_8(device_t nb_dev, u32 reg_pos, u8 mask, u8 val) +{ + u8 reg_old, reg; + reg = reg_old = pci_read_config8(nb_dev, reg_pos); + reg &= ~mask; + reg |= val; + if (reg != reg_old) { + pci_write_config8(nb_dev, reg_pos, reg); + } +} + +void set_nbmc_enable_bits(device_t nb_dev, u32 reg_pos, u32 mask, u32 val) +{ + u32 reg_old, reg; + reg = reg_old = nbmc_read_index(nb_dev, reg_pos); + reg &= ~mask; + reg |= val; + if (reg != reg_old) { + nbmc_write_index(nb_dev, reg_pos, reg); + } +} + +void set_htiu_enable_bits(device_t nb_dev, u32 reg_pos, u32 mask, u32 val) +{ + u32 reg_old, reg; + reg = reg_old = htiu_read_index(nb_dev, reg_pos); + reg &= ~mask; + reg |= val; + if (reg != reg_old) { + htiu_write_index(nb_dev, reg_pos, reg); + } +} + +void set_nbmisc_enable_bits(device_t nb_dev, u32 reg_pos, u32 mask, u32 val) +{ + u32 reg_old, reg; + reg = reg_old = nbmisc_read_index(nb_dev, reg_pos); + reg &= ~mask; + reg |= val; + if (reg != reg_old) { + nbmisc_write_index(nb_dev, reg_pos, reg); + } +} + +void set_pcie_enable_bits(device_t dev, u32 reg_pos, u32 mask, u32 val) +{ + u32 reg_old, reg; + reg = reg_old = nb_read_index(dev, NBPCIE_INDEX, reg_pos); + reg &= ~mask; + reg |= val; + if (reg != reg_old) { + nb_write_index(dev, NBPCIE_INDEX, reg_pos, reg); + } +} + +/*********************************************************** +* To access bar3 we need to program PCI MMIO 7 in K8. +* in_out: +* 1: enable/enter k8 temp mmio base +* 0: disable/restore +***********************************************************/ +void ProgK8TempMmioBase(u8 in_out, u32 pcie_base_add, u32 mmio_base_add) +{ + /* K8 Function1 is address map */ + device_t k8_f1 = dev_find_slot(0, PCI_DEVFN(0x18, 1)); + + if (in_out) { + pci_write_config32(k8_f1, 0xbc, + (((pcie_base_add + 0x10000000 - + 1) >> 8) & 0xffffff00) | 0x8); + pci_write_config32(k8_f1, 0xb8, (pcie_base_add >> 8) | 0x3); + pci_write_config32(k8_f1, 0xb4, + ((mmio_base_add + 0x10000000 - + 1) >> 8) & 0xffffff00); + pci_write_config32(k8_f1, 0xb0, (mmio_base_add >> 8) | 0x3); + } else { + pci_write_config32(k8_f1, 0xb8, 0); + pci_write_config32(k8_f1, 0xbc, 0); + pci_write_config32(k8_f1, 0xb0, 0); + pci_write_config32(k8_f1, 0xb4, 0); + } +} + +void PcieReleasePortTraining(device_t nb_dev, device_t dev, u32 port) +{ + switch (port) { + case 2: /* GFX, bit4-5 */ + case 3: + set_nbmisc_enable_bits(nb_dev, PCIE_LINK_CFG, + 1 << (port + 2), 0 << (port + 2)); + break; + case 4: /* GPPSB, bit20-24 */ + case 5: + case 6: + case 7: + set_nbmisc_enable_bits(nb_dev, PCIE_LINK_CFG, + 1 << (port + 17), 0 << (port + 17)); + break; + case 9: /* GPP, bit 4,5 of miscind 0x2D */ + case 10: + set_nbmisc_enable_bits(nb_dev, 0x2D, + 1 << (port - 5), 0 << (port - 5)); + break; + } +} + +/******************************************************************************************************** +* Output: +* 0: no device is present. +* 1: device is present and is trained. +********************************************************************************************************/ +u8 PcieTrainPort(device_t nb_dev, device_t dev, u32 port) +{ + u16 count = 5000; + u32 lc_state, reg, current_link_width, lane_mask; + int8_t current, res = 0; + u32 gfx_gpp_sb_sel; + void set_pcie_dereset(); + void set_pcie_reset(); + + switch (port) { + case 2 ... 3: + gfx_gpp_sb_sel = PCIE_CORE_INDEX_GFX; + break; + case 4 ... 7: + gfx_gpp_sb_sel = PCIE_CORE_INDEX_GPPSB; + break; + case 9 ... 10: + gfx_gpp_sb_sel = PCIE_CORE_INDEX_GPP; + break; + } + + while (count--) { + mdelay(40); + udelay(200); + lc_state = nbpcie_p_read_index(dev, 0xa5); /* lc_state */ + printk_debug("PcieLinkTraining port=%x:lc current state=%x\n", + port, lc_state); + current = lc_state & 0x3f; /* get LC_CURRENT_STATE, bit0-5 */ + + switch (current) { + case 0x00: /* 0x00-0x04 means no device is present */ + case 0x01: + case 0x02: + case 0x03: + case 0x04: + res = 0; + count = 0; + break; + case 0x06: + /* read back current link width [6:4]. */ + current_link_width = (nbpcie_p_read_index(dev, 0xA2) >> 4) & 0x7; + /* 4 means 7:4 and 15:12 + * 3 means 7:2 and 15:10 + * 2 means 7:1 and 15:9 + * egnoring the reversal case + */ + lane_mask = (0xFF << (current_link_width - 2) * 2) & 0xFF; + reg = nbpcie_ind_read_index(nb_dev, 0x65 | gfx_gpp_sb_sel); + reg |= lane_mask << 8 | lane_mask; + reg = 0xE0E0; /* TODO: See the comments in rs780_pcie.c, at about line 145. */ + nbpcie_ind_write_index(nb_dev, 0x65 | gfx_gpp_sb_sel, reg); + printk_debug("link_width=%x, lane_mask=%x", + current_link_width, lane_mask); + set_pcie_reset(); + mdelay(1); + set_pcie_dereset(); + break; + case 0x07: /* device is in compliance state (training sequence is done). Move to train the next device */ + res = 0; + count = 0; + break; + case 0x10: + reg = + pci_ext_read_config32(nb_dev, dev, + PCIE_VC0_RESOURCE_STATUS); + printk_debug("PcieTrainPort reg=0x%x\n", reg); + /* check bit1 */ + if (reg & VC_NEGOTIATION_PENDING) { /* bit1=1 means the link needs to be re-trained. */ + /* set bit8=1, bit0-2=bit4-6 */ + u32 tmp; + reg = + nbpcie_p_read_index(dev, + PCIE_LC_LINK_WIDTH); + tmp = (reg >> 4) && 0x3; /* get bit4-6 */ + reg &= 0xfff8; /* clear bit0-2 */ + reg += tmp; /* merge */ + reg |= 1 << 8; + count++; /* CIM said "keep in loop"? */ + } else { + res = 1; + count = 0; + } + break; + default: /* reset pcie */ + res = 0; + count = 0; /* break loop */ + break; + } + } + return res; +} + +/* +* Compliant with CIM_33's ATINB_SetToms. +* Set Top Of Memory below and above 4G. +*/ +void rs780_set_tom(device_t nb_dev) +{ + extern uint64_t uma_memory_base; + + /* set TOM */ + pci_write_config32(nb_dev, 0x90, uma_memory_base); + //nbmc_write_index(nb_dev, 0x1e, uma_memory_base); +} + diff --git a/src/southbridge/amd/rs780/rs780_early_setup.c b/src/southbridge/amd/rs780/rs780_early_setup.c new file mode 100644 index 0000000000..7811f0bde6 --- /dev/null +++ b/src/southbridge/amd/rs780/rs780_early_setup.c @@ -0,0 +1,668 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include "rs780_rev.h" + +#define NBHTIU_INDEX 0x94 /* Note: It is different with RS690, whose HTIU index is 0xA8 */ +#define NBMISC_INDEX 0x60 +#define NBMC_INDEX 0xE8 + +static u32 nb_read_index(device_t dev, u32 index_reg, u32 index) +{ + pci_write_config32(dev, index_reg, index); + return pci_read_config32(dev, index_reg + 0x4); +} + +static void nb_write_index(device_t dev, u32 index_reg, u32 index, u32 data) +{ + pci_write_config32(dev, index_reg, index /* | 0x80 */ ); + pci_write_config32(dev, index_reg + 0x4, data); +} + +static u32 nbmisc_read_index(device_t nb_dev, u32 index) +{ + return nb_read_index((nb_dev), NBMISC_INDEX, (index)); +} + +static void nbmisc_write_index(device_t nb_dev, u32 index, u32 data) +{ + nb_write_index((nb_dev), NBMISC_INDEX, ((index) | 0x80), (data)); +} + +static u32 htiu_read_index(device_t nb_dev, u32 index) +{ + return nb_read_index((nb_dev), NBHTIU_INDEX, (index)); +} + +static void htiu_write_index(device_t nb_dev, u32 index, u32 data) +{ + nb_write_index((nb_dev), NBHTIU_INDEX, ((index) | 0x100), (data)); +} + +static u32 nbmc_read_index(device_t nb_dev, u32 index) +{ + return nb_read_index((nb_dev), NBMC_INDEX, (index)); +} + +static void nbmc_write_index(device_t nb_dev, u32 index, u32 data) +{ + nb_write_index((nb_dev), NBMC_INDEX, ((index) | 1 << 9), (data)); +} + +static void set_htiu_enable_bits(device_t nb_dev, u32 reg_pos, u32 mask, + u32 val) +{ + u32 reg_old, reg; + reg = reg_old = htiu_read_index(nb_dev, reg_pos); + reg &= ~mask; + reg |= val; + if (reg != reg_old) { + htiu_write_index(nb_dev, reg_pos, reg); + } +} + +static void set_nbmisc_enable_bits(device_t nb_dev, u32 reg_pos, u32 mask, + u32 val) +{ + u32 reg_old, reg; + reg = reg_old = nbmisc_read_index(nb_dev, reg_pos); + reg &= ~mask; + reg |= val; + if (reg != reg_old) { + nbmisc_write_index(nb_dev, reg_pos, reg); + } +} + +static void set_nbcfg_enable_bits(device_t nb_dev, u32 reg_pos, u32 mask, + u32 val) +{ + u32 reg_old, reg; + reg = reg_old = pci_read_config32(nb_dev, reg_pos); + reg &= ~mask; + reg |= val; + if (reg != reg_old) { + pci_write_config32(nb_dev, reg_pos, reg); + } +} +/* family 10 only, for reg > 0xFF */ +#if CONFIG_CAR_FAM10 == 1 +static void set_fam10_ext_cfg_enable_bits(device_t fam10_dev, u32 reg_pos, u32 mask, + u32 val) +{ + u32 reg_old, reg; + reg = reg_old = Get_NB32(fam10_dev, reg_pos); + reg &= ~mask; + reg |= val; + if (reg != reg_old) { + Set_NB32(fam10_dev, reg_pos, reg); + } +} +#else +#define set_fam10_ext_cfg_enable_bits(a, b, c, d) do {} while (0) +#endif + + +static void set_nbcfg_enable_bits_8(device_t nb_dev, u32 reg_pos, u8 mask, + u8 val) +{ + u8 reg_old, reg; + reg = reg_old = pci_read_config8(nb_dev, reg_pos); + reg &= ~mask; + reg |= val; + if (reg != reg_old) { + pci_write_config8(nb_dev, reg_pos, reg); + } +} + +static void set_nbmc_enable_bits(device_t nb_dev, u32 reg_pos, u32 mask, + u32 val) +{ + u32 reg_old, reg; + reg = reg_old = nbmc_read_index(nb_dev, reg_pos); + reg &= ~mask; + reg |= val; + if (reg != reg_old) { + nbmc_write_index(nb_dev, reg_pos, reg); + } +} + +static void get_cpu_rev() +{ + u32 eax; + + eax = cpuid_eax(1); + printk_info("get_cpu_rev EAX=0x%x.\n", eax); + if (eax <= 0xfff) + printk_info("CPU Rev is K8_Cx.\n"); + else if (eax <= 0x10fff) + printk_info("CPU Rev is K8_Dx.\n"); + else if (eax <= 0x20fff) + printk_info("CPU Rev is K8_Ex.\n"); + else if (eax <= 0x40fff) + printk_info("CPU Rev is K8_Fx.\n"); + else if (eax == 0x60fb1 || eax == 0x60f81) /*These two IDS are exception, they are G1. */ + printk_info("CPU Rev is K8_G1.\n"); + else if (eax <= 0X60FF0) + printk_info("CPU Rev is K8_G0.\n"); + else if (eax <= 0x100000) + printk_info("CPU Rev is K8_G1.\n"); + else if (eax <= 0x100f00) + printk_info("CPU Rev is Fam 10.\n"); + else + printk_info("CPU Rev is K8_10.\n"); +} + +static u8 is_famly10() +{ + return (cpuid_eax(1) & 0xff00000) != 0; +} + +static u8 l3_cache() +{ + return (cpuid_edx(0x80000006) & (0x3FFF << 18)) != 0; +} + +static u8 cpu_core_number() +{ + return (cpuid_ecx(0x80000008) & 0xFF) + 1; +} + +static u8 get_nb_rev(device_t nb_dev) +{ + u8 reg; + reg = pci_read_config8(nb_dev, 0x89); /* copy from CIM, can't find in doc */ + switch(reg & 3) + { + case 0x01: + reg = REV_RS780_A12; + break; + case 0x02: + reg = REV_RS780_A13; + break; + default: + reg = REV_RS780_A11; + break; + } + return reg; +} + +/***************************************** + * Init HT link speed/width for rs780 -- k8 link + * 1: Check CPU Family, Family10? + * 2: Get CPU's HT speed and width + * 3: Decide HT mode 1 or 3 by HT Speed. >1GHz: HT3, else HT1 + *****************************************/ +static const u8 rs780_ibias[] = { + /* 1, 3 are reserved. */ + [0x0] = 0x4C, /* 200Mhz HyperTransport 1 only */ + [0x2] = 0x4C, /* 400Mhz HyperTransport 1 only */ + [0x4] = 0xB6, /* 600Mhz HyperTransport 1 only */ + [0x5] = 0x4C, /* 800Mhz HyperTransport 1 only */ + [0x6] = 0x9D, /* 1Ghz HyperTransport 1 only */ + /* HT3 for Family 10 */ + [0x7] = 0xB6, /* 1.2Ghz HyperTransport 3 only */ + [0x8] = 0x2B, /* 1.4Ghz HyperTransport 3 only */ + [0x9] = 0x4C, /* 1.6Ghz HyperTransport 3 only */ + [0xa] = 0x6C, /* 1.8Ghz HyperTransport 3 only */ + [0xb] = 0x9D, /* 2.0Ghz HyperTransport 3 only */ + [0xc] = 0xAD, /* 2.2Ghz HyperTransport 3 only */ + [0xd] = 0xB6, /* 2.4Ghz HyperTransport 3 only */ + [0xe] = 0xC6, /* 2.6Ghz HyperTransport 3 only */ +}; + +static void rs780_htinit() +{ + /* + * About HT, it has been done in enumerate_ht_chain(). + */ + device_t cpu_f0, rs780_f0, clk_f1; + u32 reg; + u8 cpu_ht_freq, ibias; + + cpu_f0 = PCI_DEV(0, 0x18, 0); + /************************ + * get cpu's ht freq, in cpu's function 0, offset 0x88 + * bit11-8, specifics the maximum operation frequency of the link's transmitter clock. + * The link frequency field (Frq) is cleared by cold reset. SW can write a nonzero + * value to this reg, and that value takes effect on the next warm reset or + * LDTSTOP_L disconnect sequence. + * please see the table rs780_ibias about the value and its corresponding frequency. + ************************/ + reg = pci_read_config32(cpu_f0, 0x88); + cpu_ht_freq = (reg & 0xf00) >> 8; + printk_info("rs780_htinit cpu_ht_freq=%x.\n", cpu_ht_freq); + rs780_f0 = PCI_DEV(0, 0, 0); + //set_nbcfg_enable_bits(rs780_f0, 0xC8, 0x7<<24 | 0x7<<28, 1<<24 | 1<<28); + + clk_f1 = PCI_DEV(0, 0, 1); /* We need to make sure the F1 is accessible. */ + + ibias = rs780_ibias[cpu_ht_freq]; + + /* If HT freq>1GHz, we assume the CPU is fam10, else it is K8. + * Is it appropriate? + * Frequency is 1GHz, i.e. cpu_ht_freq is 6, in most cases. + * So we check 6 only, it would be faster. */ + if ((cpu_ht_freq == 0x6) || (cpu_ht_freq == 0x5) || (cpu_ht_freq == 0x4) || + (cpu_ht_freq == 0x2) || (cpu_ht_freq == 0x0)) { + printk_info("rs780_htinit: HT1 mode\n"); + + /* HT1 mode, RPR 8.4.2 */ + /* set IBIAS code */ + set_nbcfg_enable_bits(clk_f1, 0xD8, 0x3FF, ibias); + /* Optimizes chipset HT transmitter drive strength */ + set_htiu_enable_bits(rs780_f0, 0x2A, 0x3, 0x1); + } else if ((cpu_ht_freq > 0x6) && (cpu_ht_freq < 0xf)) { + printk_info("rs780_htinit: HT3 mode\n"); + + #if CONFIG_CAR_FAM10 == 1 /* save some spaces */ + /* HT3 mode, RPR 8.4.3 */ + set_nbcfg_enable_bits(rs780_f0, 0x9c, 0x3 << 16, 0); + + /* set IBIAS code */ + set_nbcfg_enable_bits(clk_f1, 0xD8, 0x3FF, ibias); + /* Optimizes chipset HT transmitter drive strength */ + set_htiu_enable_bits(rs780_f0, 0x2A, 0x3, 0x1); + /* Enables error-retry mode */ + set_nbcfg_enable_bits(rs780_f0, 0x44, 0x1, 0x1); + /* Enables scrambling and Disalbes command throttling */ + set_nbcfg_enable_bits(rs780_f0, 0xac, (1 << 3) | (1 << 14), (1 << 3) | (1 << 14)); + /* Enables transmitter de-emphasis */ + set_nbcfg_enable_bits(rs780_f0, 0xa4, 1 << 31, 1 << 31); + /* Enabels transmitter de-emphasis level */ + /* Sets training 0 time */ + set_nbcfg_enable_bits(rs780_f0, 0xa0, 0x3F, 0x14); + + /* Enables strict TM4 detection */ + set_htiu_enable_bits(rs780_f0, 0x15, 0x1 << 22, 0x1 << 22); + /* Enables proprer DLL reset sequence */ + set_htiu_enable_bits(rs780_f0, 0x16, 0x1 << 10, 0x1 << 10); + + /* HyperTransport 3 Processor register settings to be done in northbridge */ + /* Enables error-retry mode */ + set_fam10_ext_cfg_enable_bits(cpu_f0, 0x130, 1 << 0, 1 << 0); + /* Enables scrambling */ + set_fam10_ext_cfg_enable_bits(cpu_f0, 0x170, 1 << 3, 1 << 3); + /* Enables transmitter de-emphasis + * This depends on the PCB design and the trace */ + /* TODO: */ + /* Disables command throttling */ + set_fam10_ext_cfg_enable_bits(cpu_f0, 0x168, 1 << 10, 1 << 10); + /* Sets Training 0 Time. See T0Time table for encodings */ + set_fam10_ext_cfg_enable_bits(cpu_f0, 0x16C, 0x3F, 0x20); + /* TODO: */ + #endif /* #if CONFIG_CAR_FAM10 == 1 */ + } +} + +#if CONFIG_CAR_FAM10 != 1 /* save some spaces */ +/******************************************************* +* Optimize k8 with UMA. +* See BKDG_NPT_0F guide for details. +* The processor node is addressed by its Node ID on the HT link and can be +* accessed with a device number in the PCI configuration space on Bus0. +* The Node ID 0 is mapped to Device 24 (0x18), the Node ID 1 is mapped +* to Device 25, and so on. +* The processor implements configuration registers in PCI configuration +* space using the following four headers +* Function0: HT technology configuration +* Function1: Address map configuration +* Function2: DRAM and HT technology Trace mode configuration +* Function3: Miscellaneous configuration +*******************************************************/ +static void k8_optimization() +{ + device_t k8_f0, k8_f2, k8_f3; + msr_t msr; + + printk_info("k8_optimization()\n"); + k8_f0 = PCI_DEV(0, 0x18, 0); + k8_f2 = PCI_DEV(0, 0x18, 2); + k8_f3 = PCI_DEV(0, 0x18, 3); + + /* 8.6.6 K8 Buffer Allocation Settings */ + pci_write_config32(k8_f0, 0x90, 0x01700169); /* CIM NPT_Optimization */ + set_nbcfg_enable_bits(k8_f0, 0x68, 1 << 28, 0 << 28); + set_nbcfg_enable_bits(k8_f0, 0x68, 3 << 26, 3 << 26); + set_nbcfg_enable_bits(k8_f0, 0x68, 1 << 11, 1 << 11); + /* set_nbcfg_enable_bits(k8_f0, 0x84, 1 << 11 | 1 << 13 | 1 << 15, 1 << 11 | 1 << 13 | 1 << 15); */ /* TODO */ + + pci_write_config32(k8_f3, 0x70, 0x51220111); + pci_write_config32(k8_f3, 0x74, 0x50404021); + pci_write_config32(k8_f3, 0x78, 0x08002A00); + if (pci_read_config32(k8_f3, 0xE8) & 0x3<<12) + pci_write_config32(k8_f3, 0x7C, 0x0000211A); /* dual core */ + else + pci_write_config32(k8_f3, 0x7C, 0x0000212B); /* single core */ + set_nbcfg_enable_bits_8(k8_f3, 0xDC, 0xFF, 0x25); + + set_nbcfg_enable_bits(k8_f2, 0xA0, 1 << 5, 1 << 5); + set_nbcfg_enable_bits(k8_f2, 0x94, 0xF << 24, 7 << 24); + set_nbcfg_enable_bits(k8_f2, 0x90, 1 << 10, 0 << 10); + set_nbcfg_enable_bits(k8_f2, 0xA0, 3 << 2, 3 << 2); + set_nbcfg_enable_bits(k8_f2, 0xA0, 1 << 5, 1 << 5); + + msr = rdmsr(0xC001001F); + msr.lo &= ~(1 << 9); + msr.hi &= ~(1 << 4); + wrmsr(0xC001001F, msr); +} +#else +#define k8_optimization() do{}while(0) +#endif /* #if CONFIG_CAR_FAM10 != 1 */ + +#if CONFIG_CAR_FAM10 == 1 /* save some spaces */ +void fam10_optimization() +{ + device_t cpu_f0, cpu_f2, cpu_f3; + msr_t msr; + u32 val; + + printk_info("fam10_optimization()\n"); + + cpu_f0 = PCI_DEV(0, 0x18, 0); + cpu_f2 = PCI_DEV(0, 0x18, 2); + cpu_f3 = PCI_DEV(0, 0x18, 3); + + /* 8.6.4.1 */ + /* Table 8-13 */ + pci_write_config32(cpu_f0, 0x90, 0x808502D0); + /* Table 8-14 */ + pci_write_config32(cpu_f0, 0x94, 0x00000000); + + /* Table 8-15 */ + val = pci_read_config32(cpu_f0, 0x68); + val |= 1 << 24; + pci_write_config32(cpu_f0, 0x68, val); + + /* Table 8-16 */ + val = pci_read_config32(cpu_f0, 0x84); + val &= ~(1 << 12); + pci_write_config32(cpu_f0, 0x84, val); + + /* Table 8-17 */ + val = pci_read_config32(cpu_f2, 0x90); + val &= ~(1 << 10); + pci_write_config32(cpu_f2, 0x90, val); + + /* Table 8-18 */ + pci_write_config32(cpu_f3, 0x6C, 0x60018051); + /* Table 8-19 */ + pci_write_config32(cpu_f3, 0x70, 0x60321151); + /* Table 8-20 */ + pci_write_config32(cpu_f3, 0x74, 0x00980101); + /* Table 8-21 */ + pci_write_config32(cpu_f3, 0x78, 0x00200C14); + /* Table 8-22 */ + pci_write_config32(cpu_f3, 0x7C, 0x00070811); /* TODO: Check if L3 Cache is enabled. */ + + /* Table 8-23 */ + Set_NB32(cpu_f3, 0x140, 0x00D33656); + /* Table 8-24 */ + Set_NB32(cpu_f3, 0x144, 0x00000036); + /* Table 8-25 */ + Set_NB32(cpu_f3, 0x148, 0x8000832A); + /* Table 8-26 */ + Set_NB32(cpu_f3, 0x158, 0); + /* L3 Disabled: L3 Enabled: */ + /* cores: 2 3 4 2 3 4 */ + /* bit8:4 28 26 24 24 20 16 */ + if (!l3Cache()) { + Set_NB32(cpu_f3, 0x1A0, 4 << 12 | (24 + 2*(4-cpu_core_number())) << 4 | 2); + } else { + Set_NB32(cpu_f3, 0x1A0, 4 << 12 | (16 + 4*(4-cpu_core_number())) << 4 | 4); + } +} +#else +#define fam10_optimization() do{}while(0) +#endif /* #if CONFIG_CAR_FAM10 == 1 */ + +/***************************************** +* rs780_por_pcicfg_init() +*****************************************/ +static void rs780_por_pcicfg_init(device_t nb_dev) +{ + /* enable PCI Memory Access */ + set_nbcfg_enable_bits_8(nb_dev, 0x04, (u8)(~0xFD), 0x02); + /* Set RCRB Enable */ + set_nbcfg_enable_bits_8(nb_dev, 0x84, (u8)(~0xFF), 0x1); + /* allow decode of 640k-1MB */ + set_nbcfg_enable_bits_8(nb_dev, 0x84, (u8)(~0xEF), 0x10); + /* Enable PM2_CNTL(BAR2) IO mapped cfg write access to be broadcast to both NB and SB */ + set_nbcfg_enable_bits_8(nb_dev, 0x84, (u8)(~0xFF), 0x4); + /* Power Management Register Enable */ + set_nbcfg_enable_bits_8(nb_dev, 0x84, (u8)(~0xFF), 0x80); + + /* Reg4Ch[1]=1 (APIC_ENABLE) force cpu request with address 0xFECx_xxxx to south-bridge + * Reg4Ch[6]=1 (BMMsgEn) enable BM_Set message generation + * BMMsgEn */ + set_nbcfg_enable_bits_8(nb_dev, 0x4C, (u8)(~0x00), 0x42 | 1); + + /* Reg4Ch[16]=1 (WakeC2En) enable Wake_from_C2 message generation. + * Reg4Ch[18]=1 (P4IntEnable) Enable north-bridge to accept MSI with address 0xFEEx_xxxx from south-bridge */ + set_nbcfg_enable_bits_8(nb_dev, 0x4E, (u8)(~0xFF), 0x05); + /* Reg94h[4:0] = 0x0 P drive strength offset 0 + * Reg94h[6:5] = 0x2 P drive strength additive adjust */ + set_nbcfg_enable_bits_8(nb_dev, 0x94, (u8)(~0x80), 0x40); + + /* Reg94h[20:16] = 0x0 N drive strength offset 0 + * Reg94h[22:21] = 0x2 N drive strength additive adjust */ + set_nbcfg_enable_bits_8(nb_dev, 0x96, (u8)(~0x80), 0x40); + + /* Reg80h[4:0] = 0x0 Termination offset + * Reg80h[6:5] = 0x2 Termination additive adjust */ + set_nbcfg_enable_bits_8(nb_dev, 0x80, (u8)(~0x80), 0x40); + + /* Reg80h[14] = 0x1 Enable receiver termination control */ + set_nbcfg_enable_bits_8(nb_dev, 0x81, (u8)(~0xFF), 0x40); + + /* Reg94h[15] = 0x1 Enables HT transmitter advanced features to be turned on + * Reg94h[14] = 0x1 Enable drive strength control */ + set_nbcfg_enable_bits_8(nb_dev, 0x95, (u8)(~0x3F), 0xC4); + + /* Reg94h[31:29] = 0x7 Enables HT transmitter de-emphasis */ + set_nbcfg_enable_bits_8(nb_dev, 0x97, (u8)(~0x1F), 0xE0); + + /*Reg8Ch[10:9] = 0x3 Enables Gfx Debug BAR, + * force this BAR as mem type in rs780_gfx.c */ + set_nbcfg_enable_bits_8(nb_dev, 0x8D, (u8)(~0xFF), 0x03); +} + +static void rs780_por_mc_index_init(device_t nb_dev) +{ + set_nbmc_enable_bits(nb_dev, 0x7A, ~0xFFFFFF80, 0x0000005F); + set_nbmc_enable_bits(nb_dev, 0xD8, ~0x00000000, 0x00600060); + set_nbmc_enable_bits(nb_dev, 0xD9, ~0x00000000, 0x00600060); + set_nbmc_enable_bits(nb_dev, 0xE0, ~0x00000000, 0x00000000); + set_nbmc_enable_bits(nb_dev, 0xE1, ~0x00000000, 0x00000000); + set_nbmc_enable_bits(nb_dev, 0xE8, ~0x00000000, 0x003E003E); + set_nbmc_enable_bits(nb_dev, 0xE9, ~0x00000000, 0x003E003E); +} + +static void rs780_por_misc_index_init(device_t nb_dev) +{ + /* NB_MISC_IND_WR_EN + IOC_PCIE_CNTL + * Block non-snoop DMA request if PMArbDis is set. + * Set BMSetDis */ + set_nbmisc_enable_bits(nb_dev, 0x0B, ~0xFFFF0000, 0x00000180); + set_nbmisc_enable_bits(nb_dev, 0x01, ~0xFFFFFFFF, 0x00000040); + + /* NBCFG (NBMISCIND 0x0): NB_CNTL - + * HIDE_NB_AGP_CAP ([0], default=1)HIDE + * HIDE_P2P_AGP_CAP ([1], default=1)HIDE + * HIDE_NB_GART_BAR ([2], default=1)HIDE + * AGPMODE30 ([4], default=0)DISABLE + * AGP30ENCHANCED ([5], default=0)DISABLE + * HIDE_AGP_CAP ([8], default=1)ENABLE */ + set_nbmisc_enable_bits(nb_dev, 0x00, ~0xFFFF0000, 0x00000506); /* set bit 10 for MSI */ + + /* NBMISCIND:0x6A[16]= 1 SB link can get a full swing + * set_nbmisc_enable_bits(nb_dev, 0x6A, 0ffffffffh, 000010000); + * NBMISCIND:0x6A[17]=1 Set CMGOOD_OVERRIDE. */ + set_nbmisc_enable_bits(nb_dev, 0x6A, ~0xffffffff, 0x00020000); + + /* NBMISIND:0x40 Bit[8]=1 and Bit[10]=1 following bits are required to set in order to allow LVDS or PWM features to work. */ + set_nbmisc_enable_bits(nb_dev, 0x40, ~0xffffffff, 0x00000500); + + /* NBMISIND:0xC Bit[13]=1 Enable GSM mode for C1e or C3 with pop-up. */ + set_nbmisc_enable_bits(nb_dev, 0x0C, ~0xffffffff, 0x00002000); + + /* Set NBMISIND:0x1F[3] to map NB F2 interrupt pin to INTB# */ + set_nbmisc_enable_bits(nb_dev, 0x1F, ~0xffffffff, 0x00000008); + + /* + * Enable access to DEV8 + * Enable setPower message for all ports + */ + set_nbmisc_enable_bits(nb_dev, 0x00, 1 << 6, 1 << 6); + set_nbmisc_enable_bits(nb_dev, 0x0b, 1 << 20, 1 << 20); + set_nbmisc_enable_bits(nb_dev, 0x51, 1 << 20, 1 << 20); + set_nbmisc_enable_bits(nb_dev, 0x53, 1 << 20, 1 << 20); + set_nbmisc_enable_bits(nb_dev, 0x55, 1 << 20, 1 << 20); + set_nbmisc_enable_bits(nb_dev, 0x57, 1 << 20, 1 << 20); + set_nbmisc_enable_bits(nb_dev, 0x59, 1 << 20, 1 << 20); + set_nbmisc_enable_bits(nb_dev, 0x5B, 1 << 20, 1 << 20); + set_nbmisc_enable_bits(nb_dev, 0x5D, 1 << 20, 1 << 20); + set_nbmisc_enable_bits(nb_dev, 0x5F, 1 << 20, 1 << 20); + + set_nbmisc_enable_bits(nb_dev, 0x00, 1 << 7, 1 << 7); + set_nbmisc_enable_bits(nb_dev, 0x07, 0x000000f0, 0x30); + + set_nbmisc_enable_bits(nb_dev, 0x01, 0xFFFFFFFF, 0x48); + /* Disable bus-master trigger event from SB and Enable set_slot_power message to SB */ + set_nbmisc_enable_bits(nb_dev, 0x0B, 0xffffffff, 0x500180); +} + +/***************************************** +* Some setting is from rpr. Some is from CIMx. +*****************************************/ +static void rs780_por_htiu_index_init(device_t nb_dev) +{ +#if 0 /* get from rpr. */ + set_htiu_enable_bits(nb_dev, 0x1C, 0x1<<17, 0x1<<17); + set_htiu_enable_bits(nb_dev, 0x06, 0x1<<0, 0x0<<0); + set_htiu_enable_bits(nb_dev, 0x06, 0x1<<1, 0x1<<1); + set_htiu_enable_bits(nb_dev, 0x06, 0x1<<9, 0x1<<9); + set_htiu_enable_bits(nb_dev, 0x06, 0x1<<13, 0x1<<13); + set_htiu_enable_bits(nb_dev, 0x06, 0x1<<17, 0x1<<17); + set_htiu_enable_bits(nb_dev, 0x06, 0x3<<15, 0x3<<15); + set_htiu_enable_bits(nb_dev, 0x06, 0x1<<25, 0x1<<25); + set_htiu_enable_bits(nb_dev, 0x06, 0x1<<30, 0x1<<30); + + set_htiu_enable_bits(nb_dev, 0x07, 0x1<<0, 0x1<<0); + set_htiu_enable_bits(nb_dev, 0x07, 0x1<<1, 0x0<<1); + set_htiu_enable_bits(nb_dev, 0x07, 0x1<<2, 0x0<<2); + set_htiu_enable_bits(nb_dev, 0x07, 0x1<<15, 0x1<<15); + + set_htiu_enable_bits(nb_dev, 0x0C, 0x3<<0, 0x1<<0); + set_htiu_enable_bits(nb_dev, 0x0C, 0x3<<2, 0x2<<2); + set_htiu_enable_bits(nb_dev, 0x0C, 0x3<<4, 0x0<<4); + + /* A12 only */ + set_htiu_enable_bits(nb_dev, 0x2D, 0x1<<4, 0x1<<4); + set_htiu_enable_bits(nb_dev, 0x2D, 0x1<<6, 0x1<<6); + set_htiu_enable_bits(nb_dev, 0x05, 0x1<<2, 0x1<<2); + + set_htiu_enable_bits(nb_dev, 0x1E, 0xFFFFFFFF, 0xFFFFFFFF); +#else /* get from CIM. It is more reliable than above. */ + set_htiu_enable_bits(nb_dev, 0x05, (1<<10|1<<9), 1<<10 | 1<<9); + set_htiu_enable_bits(nb_dev, 0x06, ~0xFFFFFFFE, 0x04203A202); + + set_htiu_enable_bits(nb_dev, 0x07, ~0xFFFFFFF9, 0x8001/* | 7 << 8 */); /* fam 10 */ + + set_htiu_enable_bits(nb_dev, 0x15, ~0xFFFFFFFF, 1<<31| 1<<30 | 1<<27); + set_htiu_enable_bits(nb_dev, 0x1C, ~0xFFFFFFFF, 0xFFFE0000); + + set_htiu_enable_bits(nb_dev, 0x4B, (1<<11), 1<<11); + + set_htiu_enable_bits(nb_dev, 0x0C, ~0xFFFFFFC0, 1<<0|1<<3); + + set_htiu_enable_bits(nb_dev, 0x17, (1<<27|1<<1), 0x1<<1); + set_htiu_enable_bits(nb_dev, 0x17, 0x1 << 30, 0x1<<30); + + set_htiu_enable_bits(nb_dev, 0x19, (0xFFFFF+(1<<31)), 0x186A0+(1<<31)); + + set_htiu_enable_bits(nb_dev, 0x16, (0x3F<<10), 0x7<<10); + + set_htiu_enable_bits(nb_dev, 0x23, 0xFFFFFFF, 1<<28); + + set_htiu_enable_bits(nb_dev, 0x1E, 0xFFFFFFFF, 0xFFFFFFFF); +#endif +} + +/***************************************** +* Configure RS780 registers to power-on default RPR. +* POR: Power On Reset +* RPR: Register Programming Requirements +*****************************************/ +static void rs780_por_init(device_t nb_dev) +{ + printk_info("rs780_por_init\n"); + /* ATINB_PCICFG_POR_TABLE, initialize the values for rs780 PCI Config registers */ + rs780_por_pcicfg_init(nb_dev); + + /* ATINB_MCIND_POR_TABLE */ + rs780_por_mc_index_init(nb_dev); + + /* ATINB_MISCIND_POR_TABLE */ + rs780_por_misc_index_init(nb_dev); + + /* ATINB_HTIUNBIND_POR_TABLE */ + rs780_por_htiu_index_init(nb_dev); + + /* ATINB_CLKCFG_PORT_TABLE */ + /* rs780 A11 SB Link full swing? */ +} + +/* enable CFG access to Dev8, which is the SB P2P Bridge */ +static void enable_rs780_dev8() +{ + set_nbmisc_enable_bits(PCI_DEV(0, 0, 0), 0x00, 1 << 6, 1 << 6); +} + +static void rs780_before_pci_init() +{ +} + +static void rs780_early_setup() +{ + device_t nb_dev = PCI_DEV(0, 0, 0); + printk_info("rs780_early_setup()\n"); + + get_cpu_rev(); + + /* The printk_info(s) below cause the system unstable. */ + switch (get_nb_rev(nb_dev)) { + case REV_RS780_A11: + /* printk_info("NB Revision is A11.\n"); */ + break; + case REV_RS780_A12: + /* printk_info("NB Revision is A12.\n"); */ + break; + case REV_RS780_A13: + /* printk_info("NB Revision is A13.\n"); */ + break; + } + + if (is_famly10()) + fam10_optimization(); + else + k8_optimization(); + + rs780_por_init(nb_dev); +} diff --git a/src/southbridge/amd/rs780/rs780_gfx.c b/src/southbridge/amd/rs780/rs780_gfx.c new file mode 100644 index 0000000000..5e70b2d5d6 --- /dev/null +++ b/src/southbridge/amd/rs780/rs780_gfx.c @@ -0,0 +1,1194 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* + * for rs780 internal graphics device + * device id of internal grphics: + * RS780: 0x9610 + * RS780C: 0x9611 + * RS780M: 0x9612 + * RS780MC:0x9613 + * RS780E: 0x9615 + */ +#include +#include +#include +#include +#include +#include +#include +#include "rs780.h" + +void set_pcie_reset(); +void set_pcie_dereset(); + +#define CLK_CNTL_INDEX 0x8 +#define CLK_CNTL_DATA 0xC + +/* The Integrated Info Table. */ +ATOM_INTEGRATED_SYSTEM_INFO_V2 vgainfo; + +static u32 clkind_read(device_t dev, u32 index) +{ + u32 gfx_bar2 = pci_read_config32(dev, 0x18) & ~0xF; + + *(u32*)(gfx_bar2+CLK_CNTL_INDEX) = index & 0x7F; + return *(u32*)(gfx_bar2+CLK_CNTL_DATA); +} + +static void clkind_write(device_t dev, u32 index, u32 data) +{ + u32 gfx_bar2 = pci_read_config32(dev, 0x18) & ~0xF; + /* printk_info("gfx bar 2 %02x\n", gfx_bar2); */ + + *(u32*)(gfx_bar2+CLK_CNTL_INDEX) = index | 1<<7; + *(u32*)(gfx_bar2+CLK_CNTL_DATA) = data; +} + +/* +* pci_dev_read_resources thinks it is a IO type. +* We have to force it to mem type. +*/ +static void rs780_gfx_read_resources(device_t dev) +{ + printk_info("rs780_gfx_read_resources.\n"); + + /* The initial value of 0x24 is 0xFFFFFFFF, which is confusing. + Even if we write 0xFFFFFFFF into it, it will be 0xFFF00000, + which tells us it is a memory address base. + */ + pci_write_config32(dev, 0x24, 0x00000000); + + /* Get the normal pci resources of this device */ + pci_dev_read_resources(dev); + compact_resources(dev); +} + +typedef struct _MMIORANGE +{ + u32 Base; + u32 Limit; + u8 Attribute; +} MMIORANGE; + +MMIORANGE MMIO[8], CreativeMMIO[8]; + +MMIORANGE* AllocMMIO(MMIORANGE* pMMIO) +{ + int i; + for (i=0; i<8; i++) + { + if (pMMIO[i].Limit == 0) + return &pMMIO[i]; + } + return 0; +} +void FreeMMIO(MMIORANGE* pMMIO) +{ + pMMIO->Base = 0; + pMMIO->Limit = 0; +} + +#define CIM_STATUS u32 +#define CIM_SUCCESS 0x00000000 +#define CIM_ERROR 0x80000000 +#define CIM_UNSUPPORTED 0x80000001 +#define CIM_DISABLEPORT 0x80000002 + +#define MMIO_ATTRIB_NP_ONLY 1 +#define MMIO_ATTRIB_BOTTOM_TO_TOP 1<<1 +#define MMIO_ATTRIB_SKIP_ZERO 1<<2 + +u32 SetMMIO(u32 Base, u32 Limit, u8 Attribute, MMIORANGE *pMMIO) +{ + int i; + MMIORANGE * TempRange; + for(i=0; i<8; i++) + { + if(pMMIO[i].Attribute != Attribute && Base >= pMMIO[i].Base && Limit <= pMMIO[i].Limit) + { + TempRange = AllocMMIO(pMMIO); + if(TempRange == 0) return 0x80000000; + TempRange->Base = Limit; + TempRange->Limit = pMMIO[i].Limit; + TempRange->Attribute = pMMIO[i].Attribute; + pMMIO[i].Limit = Base; + } + } + TempRange = AllocMMIO(pMMIO); + if(TempRange == 0) return 0x80000000; + TempRange->Base = Base; + TempRange->Limit = Limit; + TempRange->Attribute = Attribute; + return 0; +} + +u8 FinalizeMMIO(MMIORANGE *pMMIO) +{ + int i, j, n = 0; + for(i=0; i<8; i++) + { + if (pMMIO[i].Base == pMMIO[i].Limit) + { + FreeMMIO(&pMMIO[i]); + continue; + } + for(j=0; j> 8) & 0xFF; + BusEnd = (Value >> 16) & 0xFF; + for(Bus = BusStart; Bus <= BusEnd; Bus++) + { + for(Dev = 0; Dev <= 0x1f; Dev++) + { + tempdev = dev_find_slot(Bus, Dev << 3); + Value = pci_read_config32(tempdev, 0); + printk_debug("Dev ID %x \n", Value); + if((Value & 0xffff) == 0x1102) + {//Creative + //Found Creative SB + u32 MMIOStart = 0xffffffff; + u32 MMIOLimit = 0; + for(Reg = 0x10; Reg < 0x20; Reg+=4) + { + u32 BaseA, LimitA; + BaseA = pci_read_config32(tempdev, Reg); + Value = BaseA; + if(!(Value & 0x01)) + { + Value = Value & 0xffffff00; + if(Value != 0) + { + if(MMIOStart > Value) + MMIOStart = Value; + LimitA = 0xffffffff; + //WritePCI(PciAddress,AccWidthUint32,&LimitA); + pci_write_config32(tempdev, Reg, LimitA); + //ReadPCI(PciAddress,AccWidthUint32,&LimitA); + LimitA = pci_read_config32(tempdev, Reg); + LimitA = Value + (~LimitA + 1); + //WritePCI(PciAddress,AccWidthUint32,&BaseA); + pci_write_config32(tempdev, Reg, BaseA); + if (LimitA > MMIOLimit) + MMIOLimit = LimitA; + } + } + } + printk_debug(" MMIOStart %x MMIOLimit %x \n", MMIOStart, MMIOLimit); + if (MMIOStart < MMIOLimit) + { + Status = SetMMIO(MMIOStart>>8, MMIOLimit>>8, 0x80, pMMIO); + if(Status == CIM_ERROR) return Status; + } + } + } + } + if(Status == CIM_SUCCESS) + { + //Lets optimize MMIO + if(FinalizeMMIO(pMMIO) > 4) + { + Status = CIM_ERROR; + } + } + + return Status; +} + +void ProgramMMIO(MMIORANGE *pMMIO, u8 LinkID, u8 Attribute) +{ + int i, j, n = 7; + device_t k8_f1; + u32 temp32; + + k8_f1 = dev_find_slot(0, PCI_DEVFN(0x18, 1)); + + for(i = 0; i < 8; i++) + { + int k = 0, MmioReg; + u32 Base = 0; + u32 Limit = 0; + for(j = 0; j < 8; j++) + { + if (Base < pMMIO[j].Base) + { + Base = pMMIO[j].Base; + k = j; + } + } + if(pMMIO[k].Limit != 0) + { + if(Attribute & MMIO_ATTRIB_NP_ONLY && pMMIO[k].Attribute == 0 ) + { + Base = 0; + } + else + { + Base = pMMIO[k].Base | 0x3; + Limit= ((pMMIO[k].Limit - 1) & 0xffffff00) | pMMIO[k].Attribute | (LinkID << 4); + } + FreeMMIO(&pMMIO[k]); + } + if (Attribute & MMIO_ATTRIB_SKIP_ZERO && Base == 0 && Limit == 0) continue; + MmioReg = (Attribute & MMIO_ATTRIB_BOTTOM_TO_TOP)?n:(7-n); + n--; + //RWPCI(PCI_ADDRESS(0,CPU_DEV,CPU_F1,0x80+MmioReg*8),AccWidthUint32 |S3_SAVE,0x0,0x0); + pci_write_config32(k8_f1, 0x80+MmioReg*8, 0); + + //WritePCI(PCI_ADDRESS(0,CPU_DEV,CPU_F1,0x84+MmioReg*8),AccWidthUint32 |S3_SAVE,&Limit); + pci_write_config32(k8_f1, 0x84+MmioReg*8, Limit); + + //WritePCI(PCI_ADDRESS(0,CPU_DEV,CPU_F1,0x80+MmioReg*8),AccWidthUint32 |S3_SAVE,&Base); + pci_write_config32(k8_f1, 0x80+MmioReg*8, Base); + } +} + +static void internal_gfx_pci_dev_init(struct device *dev) +{ + unsigned char * bpointer; + volatile u32 * GpuF0MMReg; + volatile u32 * pointer; + int i; + u16 command; + u32 value, temp, Base32, Limit32; + CIM_STATUS Status; + u16 deviceid, vendorid; + device_t nb_dev = dev_find_slot(0, 0); + device_t k8_f2 = dev_find_slot(0, PCI_DEVFN(0x18, 2)); + device_t k8_f1 = dev_find_slot(0, PCI_DEVFN(0x18, 1)); + device_t k8_f0 = dev_find_slot(0, PCI_DEVFN(0x18, 0)); + device_t dev0x14 = dev_find_slot(0, PCI_DEVFN(0x14, 4)); + + struct southbridge_amd_rs780_config *cfg = + (struct southbridge_amd_rs780_config *)dev->chip_info; + + deviceid = pci_read_config16(dev, PCI_DEVICE_ID); + vendorid = pci_read_config16(dev, PCI_VENDOR_ID); + printk_info("internal_gfx_pci_dev_init device=%x, vendor=%x.\n", + deviceid, vendorid); + + command = pci_read_config16(dev, 0x04); + command |= 0x7; + pci_write_config16(dev, 0x04, command); + + /* Clear vgainfo. */ + bpointer = (unsigned char *) &vgainfo; + for(i=0; i>8)|((value&0xff000000)>>8); + *(GpuF0MMReg + 0x2c04/4) = ((value&0xff0)<<8); + *(GpuF0MMReg + 0x5428/4) = ((value&0xffff0000)+0x10000)-((value&0xffff)<<16); + *(GpuF0MMReg + 0x2000/4) = 0x00000011; + *(GpuF0MMReg + 0x200c/4) = 0x00000020; + *(GpuF0MMReg + 0x2010/4) = 0x10204810; + *(GpuF0MMReg + 0x2010/4) = 0x00204810; + *(GpuF0MMReg + 0x2014/4) = 0x10408810; + *(GpuF0MMReg + 0x2014/4) = 0x00408810; + *(GpuF0MMReg + 0x2414/4) = 0x00000080; + *(GpuF0MMReg + 0x2418/4) = 0x84422415; + *(GpuF0MMReg + 0x2418/4) = 0x04422415; + *(GpuF0MMReg + 0x5490/4) = 0x00000001; + *(GpuF0MMReg + 0x7de4/4) |= (1<<3) | (1<<4); + /* Force allow LDT_STOP Cool'n'Quiet workaround. */ + *(GpuF0MMReg + 0x655c/4) |= 1<<4; + /* GFX_InitFBAccess finished. */ + + /* GFX_StartMC. */ +#if (CONFIG_GFXUMA == 1) /* for UMA mode. */ + /* MC_INIT_COMPLETE. */ + set_nbmc_enable_bits(nb_dev, 0x2, 0, 1<<31); + /* MC_STARTUP, MC_POWERED_UP and MC_VMODE.*/ + set_nbmc_enable_bits(nb_dev, 0x1, 1<<18, 1|1<<2); + + set_nbmc_enable_bits(nb_dev, 0xb1, 0, 1<<6); + set_nbmc_enable_bits(nb_dev, 0xc3, 0, 1); + nbmc_write_index(nb_dev, 0x07, 0x18); + nbmc_write_index(nb_dev, 0x06, 0x00000102); + nbmc_write_index(nb_dev, 0x09, 0x40000008); + set_nbmc_enable_bits(nb_dev, 0x6, 0, 1<<31); + /* GFX_StartMC finished. */ +#else + /* for SP mode. */ + set_nbmc_enable_bits(nb_dev, 0xaa, 0xf0, 0x30); + set_nbmc_enable_bits(nb_dev, 0xce, 0xf0, 0x30); + set_nbmc_enable_bits(nb_dev, 0xca, 0xff000000, 0x47000000); + set_nbmc_enable_bits(nb_dev, 0xcb, 0x3f000000, 0x01000000); + set_nbmc_enable_bits(nb_dev, 0x01, 0, 1<<0); + set_nbmc_enable_bits(nb_dev, 0x04, 0, 1<<31); + set_nbmc_enable_bits(nb_dev, 0xb4, 0x3f, 0x3f); + set_nbmc_enable_bits(nb_dev, 0xb4, 0, 1<<6); + set_nbmc_enable_bits(nb_dev, 0xc3, 1<<11, 0); + set_nbmc_enable_bits(nb_dev, 0xa0, 1<<29, 0); + nbmc_write_index(nb_dev, 0xa4, 0x3484576f); + nbmc_write_index(nb_dev, 0xa5, 0x222222df); + nbmc_write_index(nb_dev, 0xa6, 0x00000000); + nbmc_write_index(nb_dev, 0xa7, 0x00000000); + set_nbmc_enable_bits(nb_dev, 0xc3, 1<<8, 0); + udelay(10); + set_nbmc_enable_bits(nb_dev, 0xc3, 1<<9, 0); + udelay(10); + set_nbmc_enable_bits(nb_dev, 0x01, 0, 1<<2); + udelay(200); + set_nbmc_enable_bits(nb_dev, 0x01, 0, 1<<3); + set_nbmc_enable_bits(nb_dev, 0xa0, 0, 1<<31); + udelay(500); + set_nbmc_enable_bits(nb_dev, 0x02, 0, 1<<31); + set_nbmc_enable_bits(nb_dev, 0xa0, 0, 1<<30); + set_nbmc_enable_bits(nb_dev, 0xa0, 1<<31, 0); + set_nbmc_enable_bits(nb_dev, 0xa0, 0, 1<<29); + nbmc_write_index(nb_dev, 0xa4, 0x23484576); + nbmc_write_index(nb_dev, 0xa5, 0x00000000); + nbmc_write_index(nb_dev, 0xa6, 0x00000000); + nbmc_write_index(nb_dev, 0xa7, 0x00000000); + /* GFX_StartMC finished. */ + + /* GFX_SPPowerManagment, don't care for new. */ + /* Post MC Init table programming. */ + set_nbmc_enable_bits(nb_dev, 0xac, ~(0xfffffff0), 0x0b); + + /* Do we need Write and Read Calibration? */ + /* GFX_Init finished. */ +#endif + + /* GFX_InitIntegratedInfo. */ + /* fill the Integrated Info Table. */ + vgainfo.sHeader.usStructureSize = sizeof(ATOM_INTEGRATED_SYSTEM_INFO_V2); + vgainfo.sHeader.ucTableFormatRevision = 1; + vgainfo.sHeader.ucTableContentRevision = 2; + +#if (CONFIG_GFXUMA == 0) /* SP mode. */ + vgainfo.ulBootUpSidePortClock = 667*100; + vgainfo.ucMemoryType = 3; + vgainfo.ulMinSidePortClock = 333*100; +#endif + + vgainfo.ulBootUpEngineClock = 500 * 100; /* set boot up GFX engine clock. */ + vgainfo.ulReserved1[0] = 0; vgainfo.ulReserved1[1] = 0; + value = pci_read_config32(k8_f2, 0x94); + printk_debug("MEMCLK = %x\n", value&0x7); + vgainfo.ulBootUpUMAClock = 333 * 100; /* set boot up UMA memory clock. */ + vgainfo.ulBootUpSidePortClock = 0; /* disable SP. */ + vgainfo.ulMinSidePortClock = 0; /* disable SP. */ + for(i=0; i<6; i++) + vgainfo.ulReserved2[i] = 0; + vgainfo.ulSystemConfig = 0; + //vgainfo.ulSystemConfig |= 1<<1 | 1<<3 | 1<<4 | 1<<5 | 1<<6 | 1<<7 | 1; + vgainfo.ulBootUpReqDisplayVector = 0; //? + vgainfo.ulOtherDisplayMisc = 0; //? + vgainfo.ulDDISlot1Config = 0x000c0011; //0; //? + vgainfo.ulDDISlot2Config = 0x00130022; //0; //? + vgainfo.ucMemoryType = 2; + /* UMA Channel Number: 1 or 2. */ + vgainfo.ucUMAChannelNumber = 2; + vgainfo.ucDockingPinBit = 0; //? + vgainfo.ucDockingPinPolarity = 0; //? + vgainfo.ulDockingPinCFGInfo = 0; //? + vgainfo.ulCPUCapInfo = 3; /* K8. */ + + /* page 5-19 on BDG. */ + vgainfo.usNumberOfCyclesInPeriod = 0x8019; + vgainfo.usMaxNBVoltage = 0x1a; + vgainfo.usMinNBVoltage = 0; + vgainfo.usBootUpNBVoltage = 0x1a; + + value = pci_read_config32(nb_dev, 0xd0); + printk_debug("NB HT speed = %x.\n", value); + value = pci_read_config32(k8_f0, 0x88); + printk_debug("CPU HT speed = %x.\n", value); + vgainfo.ulHTLinkFreq = 100 * 100; /* set HT speed. */ + + /* HT width. */ + value = pci_read_config32(nb_dev, 0xc8); + printk_debug("HT width = %x.\n", value); + vgainfo.usMinHTLinkWidth = 16; + vgainfo.usMaxHTLinkWidth = 16; + vgainfo.usUMASyncStartDelay = 322; + vgainfo.usUMADataReturnTime = 86; + vgainfo.usLinkStatusZeroTime = 0x00c8; //0; //? + vgainfo.usReserved = 0; + vgainfo.ulHighVoltageHTLinkFreq = 100 * 100; + vgainfo.ulLowVoltageHTLinkFreq = 100 * 100; + vgainfo.usMaxUpStreamHTLinkWidth = 16; + vgainfo.usMaxDownStreamHTLinkWidth = 16; + vgainfo.usMinUpStreamHTLinkWidth = 16; + vgainfo.usMinDownStreamHTLinkWidth = 16; + for(i=0; i<97; i++) + vgainfo.ulReserved3[i] = 0; + + /* Transfer the Table to VBIOS. */ + pointer = (u32 *)&vgainfo; + for(i=0; i> 8; + if(Base32 < Limit32) + { + Status = GetCreativeMMIO(&CreativeMMIO[0]); + if(Status != CIM_ERROR) + SetMMIO(Base32, Limit32, 0x0, &MMIO[0]); + } + /* Set MMIO for prefetchable P2P. */ + if(Status != CIM_ERROR) + { + temp = pci_read_config32(dev0x14, 0x24); + + Base32 = (temp & 0x0fff0) <<8; + Limit32 = ((temp & 0x0fff00000) + 0x100000) >> 8; + if(Base32 < Limit32) + SetMMIO(Base32, Limit32, 0x0, &MMIO[0]); + } + + FinalizeMMIO(&MMIO[0]); + + ProgramMMIO(&CreativeMMIO[0], 0, MMIO_ATTRIB_NP_ONLY); + ProgramMMIO(&MMIO[0], 0, MMIO_ATTRIB_NP_ONLY | MMIO_ATTRIB_BOTTOM_TO_TOP | MMIO_ATTRIB_SKIP_ZERO); +#endif + + pci_dev_init(dev); + + /* clk ind */ + clkind_write(dev, 0x08, 0x01); + clkind_write(dev, 0x0C, 0x22); + clkind_write(dev, 0x0F, 0x0); + clkind_write(dev, 0x11, 0x0); + clkind_write(dev, 0x12, 0x0); + clkind_write(dev, 0x14, 0x0); + clkind_write(dev, 0x15, 0x0); + clkind_write(dev, 0x16, 0x0); + clkind_write(dev, 0x17, 0x0); + clkind_write(dev, 0x18, 0x0); + clkind_write(dev, 0x19, 0x0); + clkind_write(dev, 0x1A, 0x0); + clkind_write(dev, 0x1B, 0x0); + clkind_write(dev, 0x1C, 0x0); + clkind_write(dev, 0x1D, 0x0); + clkind_write(dev, 0x1E, 0x0); + clkind_write(dev, 0x26, 0x0); + clkind_write(dev, 0x27, 0x0); + clkind_write(dev, 0x28, 0x0); + clkind_write(dev, 0x5C, 0x0); +} + + +/* +* Set registers in RS780 and CPU to enable the internal GFX. +* Please refer to CIM source code and BKDG. +*/ +extern uint64_t uma_memory_base, uma_memory_size; + +static void rs780_internal_gfx_enable(device_t dev) +{ + u32 l_dword; + int i; + device_t k8_f0 = 0, k8_f2 = 0; + device_t nb_dev = dev_find_slot(0, 0); + msr_t sysmem; + +#if (CONFIG_GFXUMA == 0) + u32 FB_Start, FB_End; +#endif + + printk_info("rs780_internal_gfx_enable dev = 0x%p, nb_dev = 0x%p.\n", dev, nb_dev); + + sysmem = rdmsr(0xc001001a); + printk_info("sysmem = %x_%x\n", sysmem.hi, sysmem.lo); + + /* The system top memory in 780. */ + pci_write_config32(nb_dev, 0x90, sysmem.lo); + htiu_write_index(nb_dev, 0x30, 0); + htiu_write_index(nb_dev, 0x31, 0); + + /* Disable external GFX and enable internal GFX. */ + l_dword = pci_read_config32(nb_dev, 0x8c); + l_dword &= ~(1<<0); + l_dword |= 1<<1; + pci_write_config32(nb_dev, 0x8c, l_dword); + + /* NB_SetDefaultIndexes */ + pci_write_config32(nb_dev, 0x94, 0x7f); + pci_write_config32(nb_dev, 0x60, 0x7f); + pci_write_config32(nb_dev, 0xe0, 0); + + /* NB_InitEarlyNB finished. */ + + /* LPC DMA Deadlock workaround? */ + /* GFX_InitCommon*/ + k8_f0 = dev_find_slot(0, PCI_DEVFN(0x18, 0)); + l_dword = pci_read_config32(k8_f0, 0x68); + l_dword &= ~(3 << 21); + l_dword |= (1 << 21); + pci_write_config32(k8_f0, 0x68, l_dword); + + /* GFX_InitCommon. */ + nbmc_write_index(nb_dev, 0x23, 0x00c00010); + set_nbmc_enable_bits(nb_dev, 0x16, 1<<15, 1<<15); + set_nbmc_enable_bits(nb_dev, 0x25, 0xffffffff, 0x111f111f); + set_htiu_enable_bits(nb_dev, 0x37, 1<<24, 1<<24); + +#if (CONFIG_GFXUMA == 1) + /* GFX_InitUMA. */ + /* Copy CPU DDR Controller to NB MC. */ + k8_f2 = dev_find_slot(0, PCI_DEVFN(0x18, 2)); + for (i = 0; i < 12; i++) + { + l_dword = pci_read_config32(k8_f2, 0x40 + i * 4); + nbmc_write_index(nb_dev, 0x30 + i, l_dword); + } + + l_dword = pci_read_config32(k8_f2, 0x80); + nbmc_write_index(nb_dev, 0x3c, l_dword); + + l_dword = pci_read_config32(k8_f2, 0x94); + if(l_dword & (1<<22)) + set_nbmc_enable_bits(nb_dev, 0x3c, 0, 1<<16); + else + set_nbmc_enable_bits(nb_dev, 0x3c, 1<<16, 0); + + if(l_dword & (1<<8)) + set_nbmc_enable_bits(nb_dev, 0x3c, 0, 1<<17); + else + set_nbmc_enable_bits(nb_dev, 0x3c, 1<<17, 0); + + l_dword = pci_read_config32(k8_f2, 0x90); + if(l_dword & (1<<10)) + set_nbmc_enable_bits(nb_dev, 0x3c, 0, 1<<18); + else + set_nbmc_enable_bits(nb_dev, 0x3c, 1<<18, 0); + + /* Set UMA in the 780 side. */ + /* UMA start address, size. */ + /* The same value in spite of system memory size. */ + nbmc_write_index(nb_dev, 0x10, 0xcfffc000); + nbmc_write_index(nb_dev, 0x11, uma_memory_base); + nbmc_write_index(nb_dev, 0x12, 0); + nbmc_write_index(nb_dev, 0xf0, 256); + /* GFX_InitUMA finished. */ +#else + /* GFX_InitSP. */ + /* SP memory:Hynix HY5TQ1G631ZNFP. 128MB = 64M * 16. 667MHz. DDR3. */ + + /* Enable Async mode. */ + set_nbmc_enable_bits(nb_dev, 0x06, 7<<8, 1<<8); + set_nbmc_enable_bits(nb_dev, 0x08, 1<<10, 0); + /* The last item in AsynchMclkTaskFileIndex. Why? */ + /* MC_MPLL_CONTROL2. */ + nbmc_write_index(nb_dev, 0x07, 0x40100028); + /* MC_MPLL_DIV_CONTROL. */ + nbmc_write_index(nb_dev, 0x0b, 0x00000028); + /* MC_MPLL_FREQ_CONTROL. */ + set_nbmc_enable_bits(nb_dev, 0x09, 3<<12|15<<16|15<<8, 1<<12|4<<16|0<<8); + /* MC_MPLL_CONTROL3. For PM. */ + set_nbmc_enable_bits(nb_dev, 0x08, 0xff<<13, 1<<13|1<<18); + /* MPLL_CAL_TRIGGER. */ + set_nbmc_enable_bits(nb_dev, 0x06, 0, 1<<0); + udelay(200); /* time is long enough? */ + set_nbmc_enable_bits(nb_dev, 0x06, 0, 1<<1); + set_nbmc_enable_bits(nb_dev, 0x06, 1<<0, 0); + /* MCLK_SRC_USE_MPLL. */ + set_nbmc_enable_bits(nb_dev, 0x02, 0, 1<<20); + + /* Pre Init MC. */ + nbmc_write_index(nb_dev, 0x01, 0x88108280); + set_nbmc_enable_bits(nb_dev, 0x02, ~(1<<20), 0x00030200); + nbmc_write_index(nb_dev, 0x04, 0x08881018); + nbmc_write_index(nb_dev, 0x05, 0x000000bb); + nbmc_write_index(nb_dev, 0x0c, 0x0f00001f); + nbmc_write_index(nb_dev, 0xa1, 0x01f10000); + /* MCA_INIT_DLL_PM. */ + set_nbmc_enable_bits(nb_dev, 0xc9, 1<<24, 1<<24); + nbmc_write_index(nb_dev, 0xa2, 0x74f20000); + nbmc_write_index(nb_dev, 0xa3, 0x8af30000); + nbmc_write_index(nb_dev, 0xaf, 0x47d0a41c); + nbmc_write_index(nb_dev, 0xb0, 0x88800130); + nbmc_write_index(nb_dev, 0xb1, 0x00000040); + nbmc_write_index(nb_dev, 0xb4, 0x41247000); + nbmc_write_index(nb_dev, 0xb5, 0x00066664); + nbmc_write_index(nb_dev, 0xb6, 0x00000022); + nbmc_write_index(nb_dev, 0xb7, 0x00000044); + nbmc_write_index(nb_dev, 0xb8, 0xbbbbbbbb); + nbmc_write_index(nb_dev, 0xb9, 0xbbbbbbbb); + nbmc_write_index(nb_dev, 0xba, 0x55555555); + nbmc_write_index(nb_dev, 0xc1, 0x00000000); + nbmc_write_index(nb_dev, 0xc2, 0x00000000); + nbmc_write_index(nb_dev, 0xc3, 0x80006b00); + nbmc_write_index(nb_dev, 0xc4, 0x00066664); + nbmc_write_index(nb_dev, 0xc5, 0x00000000); + nbmc_write_index(nb_dev, 0xd2, 0x00000022); + nbmc_write_index(nb_dev, 0xd3, 0x00000044); + nbmc_write_index(nb_dev, 0xd6, 0x00050005); + nbmc_write_index(nb_dev, 0xd7, 0x00000000); + nbmc_write_index(nb_dev, 0xd8, 0x00700070); + nbmc_write_index(nb_dev, 0xd9, 0x00700070); + nbmc_write_index(nb_dev, 0xe0, 0x00200020); + nbmc_write_index(nb_dev, 0xe1, 0x00200020); + nbmc_write_index(nb_dev, 0xe8, 0x00200020); + nbmc_write_index(nb_dev, 0xe9, 0x00200020); + nbmc_write_index(nb_dev, 0xe0, 0x00180018); + nbmc_write_index(nb_dev, 0xe1, 0x00180018); + nbmc_write_index(nb_dev, 0xe8, 0x00180018); + nbmc_write_index(nb_dev, 0xe9, 0x00180018); + + /* Misc options. */ + /* Memory Termination. */ + set_nbmc_enable_bits(nb_dev, 0xa1, 0x0ff, 0x044); + set_nbmc_enable_bits(nb_dev, 0xb4, 0xf00, 0xb00); +#if 0 + /* Controller Termation. */ + set_nbmc_enable_bits(nb_dev, 0xb1, 0x77770000, 0x77770000); +#endif + + /* OEM Init MC. 667MHz. */ + nbmc_write_index(nb_dev, 0xa8, 0x7a5aaa78); + nbmc_write_index(nb_dev, 0xa9, 0x514a2319); + nbmc_write_index(nb_dev, 0xaa, 0x54400520); + nbmc_write_index(nb_dev, 0xab, 0x441460ff); + nbmc_write_index(nb_dev, 0xa0, 0x20f00a48); + set_nbmc_enable_bits(nb_dev, 0xa2, ~(0xffffffc7), 0x10); + nbmc_write_index(nb_dev, 0xb2, 0x00000303); + set_nbmc_enable_bits(nb_dev, 0xb1, ~(0xffffff70), 0x45); + /* Do it later. */ + /* set_nbmc_enable_bits(nb_dev, 0xac, ~(0xfffffff0), 0x0b); */ + + /* Init PM timing. */ + for(i=0; i<4; i++) + { + l_dword = nbmc_read_index(nb_dev, 0xa0+i); + nbmc_write_index(nb_dev, 0xc8+i, l_dword); + } + for(i=0; i<4; i++) + { + l_dword = nbmc_read_index(nb_dev, 0xa8+i); + nbmc_write_index(nb_dev, 0xcc+i, l_dword); + } + l_dword = nbmc_read_index(nb_dev, 0xb1); + set_nbmc_enable_bits(nb_dev, 0xc8, 0xff<<24, ((l_dword&0x0f)<<24)|((l_dword&0xf00)<<20)); + + /* Init MC FB. */ + /* FB_Start = ; FB_End = ; iSpSize = 0x0080, 128MB. */ + nbmc_write_index(nb_dev, 0x11, 0x40000000); + FB_Start = 0xc00 + 0x080; + FB_End = 0xc00 + 0x080; + nbmc_write_index(nb_dev, 0x10, (((FB_End&0xfff)<<20)-0x10000)|(((FB_Start&0xfff)-0x080)<<4)); + set_nbmc_enable_bits(nb_dev, 0x0d, ~0x000ffff0, (FB_Start&0xfff)<<20); + nbmc_write_index(nb_dev, 0x0f, 0); + nbmc_write_index(nb_dev, 0x0e, (FB_Start&0xfff)|(0xaaaa<<12)); +#endif + + /* GFX_InitSP finished. */ +} + +static struct pci_operations lops_pci = { + .set_subsystem = pci_dev_set_subsystem, +}; + +static struct device_operations pcie_ops = { + .read_resources = rs780_gfx_read_resources, + .set_resources = pci_dev_set_resources, + .enable_resources = pci_dev_enable_resources, + .init = internal_gfx_pci_dev_init, /* The option ROM initializes the device. rs780_gfx_init, */ + .scan_bus = 0, + .enable = rs780_internal_gfx_enable, + .ops_pci = &lops_pci, +}; + +/* + * We should list all of them here. + * */ +static struct pci_driver pcie_driver_780 __pci_driver = { + .ops = &pcie_ops, + .vendor = PCI_VENDOR_ID_ATI, + .device = PCI_DEVICE_ID_ATI_RS780_INT_GFX, +}; + +static struct pci_driver pcie_driver_780c __pci_driver = { + .ops = &pcie_ops, + .vendor = PCI_VENDOR_ID_ATI, + .device = PCI_DEVICE_ID_ATI_RS780C_INT_GFX, +}; +static struct pci_driver pcie_driver_780m __pci_driver = { + .ops = &pcie_ops, + .vendor = PCI_VENDOR_ID_ATI, + .device = PCI_DEVICE_ID_ATI_RS780M_INT_GFX, +}; +static struct pci_driver pcie_driver_780mc __pci_driver = { + .ops = &pcie_ops, + .vendor = PCI_VENDOR_ID_ATI, + .device = PCI_DEVICE_ID_ATI_RS780MC_INT_GFX, +}; +static struct pci_driver pcie_driver_780e __pci_driver = { + .ops = &pcie_ops, + .vendor = PCI_VENDOR_ID_ATI, + .device = PCI_DEVICE_ID_ATI_RS780E_INT_GFX, +}; + +/* step 12 ~ step 14 from rpr */ +static void single_port_configuration(device_t nb_dev, device_t dev) +{ + u8 result, width; + u32 reg32; + struct southbridge_amd_rs780_config *cfg = + (struct southbridge_amd_rs780_config *)nb_dev->chip_info; + + printk_info("rs780_gfx_init single_port_configuration.\n"); + + /* step 12 training, releases hold training for GFX port 0 (device 2) */ + PcieReleasePortTraining(nb_dev, dev, 2); + result = PcieTrainPort(nb_dev, dev, 2); + printk_info("rs780_gfx_init single_port_configuration step12.\n"); + + /* step 13 Power Down Control */ + /* step 13.1 Enables powering down transmitter and receiver pads along with PLL macros. */ + set_pcie_enable_bits(nb_dev, 0x40, 1 << 0, 1 << 0); + + /* step 13.a Link Training was NOT successful */ + if (!result) { + set_nbmisc_enable_bits(nb_dev, 0x8, 0, 0x3 << 4); /* prevent from training. */ + set_nbmisc_enable_bits(nb_dev, 0xc, 0, 0x3 << 2); /* hide the GFX bridge. */ + if (cfg->gfx_tmds) + nbpcie_ind_write_index(nb_dev, 0x65, 0xccf0f0); + else { + nbpcie_ind_write_index(nb_dev, 0x65, 0xffffffff); + set_nbmisc_enable_bits(nb_dev, 0x7, 1 << 3, 1 << 3); + } + } else { /* step 13.b Link Training was successful */ + set_pcie_enable_bits(dev, 0xA2, 0xFF, 0x1); + reg32 = nbpcie_p_read_index(dev, 0x29); + width = reg32 & 0xFF; + printk_debug("GFX Inactive Lanes = 0x%x.\n", width); + switch (width) { + case 1: + case 2: + nbpcie_ind_write_index(nb_dev, 0x65, + cfg->gfx_lane_reversal ? 0x7f7f : 0xccfefe); + break; + case 4: + nbpcie_ind_write_index(nb_dev, 0x65, + cfg->gfx_lane_reversal ? 0x3f3f : 0xccfcfc); + break; + case 8: + nbpcie_ind_write_index(nb_dev, 0x65, + cfg->gfx_lane_reversal ? 0x0f0f : 0xccf0f0); + break; + } + } + printk_info("rs780_gfx_init single_port_configuration step13.\n"); + + /* step 14 Reset Enumeration Timer, disables the shortening of the enumeration timer */ + set_pcie_enable_bits(dev, 0x70, 1 << 19, 1 << 19); + printk_info("rs780_gfx_init single_port_configuration step14.\n"); +} + +static void dual_port_configuration(device_t nb_dev, device_t dev) +{ + u8 result, width; + u32 reg32, dev_ind = dev->path.pci.devfn >> 3; + struct southbridge_amd_rs780_config *cfg = + (struct southbridge_amd_rs780_config *)nb_dev->chip_info; + + /* 5.4.1.2 Dual Port Configuration */ + set_nbmisc_enable_bits(nb_dev, 0x36, 1 << 31, 1 << 31); + set_nbmisc_enable_bits(nb_dev, 0x08, 0xF << 8, 0x5 << 8); + set_nbmisc_enable_bits(nb_dev, 0x36, 1 << 31, 0 << 31); + + /* 5.7. Training for Device 2 */ + /* 5.7.1. Releases hold training for GFX port 0 (device 2) */ + PcieReleasePortTraining(nb_dev, dev, dev_ind); + /* 5.7.2- 5.7.9. PCIE Link Training Sequence */ + result = PcieTrainPort(nb_dev, dev, dev_ind); + + /* Power Down Control for Device 2 */ + /* Link Training was NOT successful */ + if (!result) { + /* Powers down all lanes for port A */ + /* nbpcie_ind_write_index(nb_dev, 0x65, 0x0f0f); */ + /* Note: I have to disable the slot where there isnt a device, + * otherwise the system will hang. I dont know why. */ + set_nbmisc_enable_bits(nb_dev, 0x0c, 1 << dev_ind, 1 << dev_ind); + + } else { /* step 16.b Link Training was successful */ + reg32 = nbpcie_p_read_index(dev, 0xa2); + width = (reg32 >> 4) & 0x7; + printk_debug("GFX LC_LINK_WIDTH = 0x%x.\n", width); + switch (width) { + case 1: + case 2: + nbpcie_ind_write_index(nb_dev, 0x65, + cfg->gfx_lane_reversal ? 0x0707 : 0x0e0e); + break; + case 4: + nbpcie_ind_write_index(nb_dev, 0x65, + cfg->gfx_lane_reversal ? 0x0303 : 0x0c0c); + break; + } + } +} + +/* For single port GFX configuration Only +* width: +* 000 = x16 +* 001 = x1 +* 010 = x2 +* 011 = x4 +* 100 = x8 +* 101 = x12 (not supported) +* 110 = x16 +*/ +static void dynamic_link_width_control(device_t nb_dev, device_t dev, u8 width) +{ + u32 reg32; + device_t sb_dev; + struct southbridge_amd_rs780_config *cfg = + (struct southbridge_amd_rs780_config *)nb_dev->chip_info; + + /* step 5.9.1.1 */ + reg32 = nbpcie_p_read_index(dev, 0xa2); + + /* step 5.9.1.2 */ + set_pcie_enable_bits(nb_dev, 0x40, 1 << 0, 1 << 0); + /* step 5.9.1.3 */ + set_pcie_enable_bits(dev, 0xa2, 3 << 0, width << 0); + /* step 5.9.1.4 */ + set_pcie_enable_bits(dev, 0xa2, 1 << 8, 1 << 8); + /* step 5.9.2.4 */ + if (0 == cfg->gfx_reconfiguration) + set_pcie_enable_bits(dev, 0xa2, 1 << 11, 1 << 11); + + /* step 5.9.1.5 */ + do { + reg32 = nbpcie_p_read_index(dev, 0xa2); + } + while (reg32 & 0x100); + + /* step 5.9.1.6 */ + sb_dev = dev_find_slot(0, PCI_DEVFN(8, 0)); + do { + reg32 = pci_ext_read_config32(nb_dev, sb_dev, + PCIE_VC0_RESOURCE_STATUS); + } while (reg32 & VC_NEGOTIATION_PENDING); + + /* step 5.9.1.7 */ + reg32 = nbpcie_p_read_index(dev, 0xa2); + if (((reg32 & 0x70) >> 4) != 0x6) { + /* the unused lanes should be powered off. */ + } + + /* step 5.9.1.8 */ + set_pcie_enable_bits(nb_dev, 0x40, 1 << 0, 0 << 0); +} + +/* +* GFX Core initialization, dev2, dev3 +*/ +void rs780_gfx_init(device_t nb_dev, device_t dev, u32 port) +{ + u16 reg16; + u32 reg32; + struct southbridge_amd_rs780_config *cfg = + (struct southbridge_amd_rs780_config *)nb_dev->chip_info; + + printk_info("rs780_gfx_init, nb_dev=0x%p, dev=0x%p, port=0x%x.\n", + nb_dev, dev, port); + + /* GFX Core Initialization */ + //if (port == 2) return; + + /* step 1, lane reversal (only need if CMOS option is enabled) */ + if (cfg->gfx_lane_reversal) { + set_nbmisc_enable_bits(nb_dev, 0x33, 1 << 2, 1 << 2); + if (cfg->gfx_dual_slot) + set_nbmisc_enable_bits(nb_dev, 0x33, 1 << 3, 1 << 3); + } + printk_info("rs780_gfx_init step1.\n"); + + /* step 1.1, dual-slot gfx configuration (only need if CMOS option is enabled) */ + /* AMD calls the configuration CrossFire */ + if (cfg->gfx_dual_slot) + set_nbmisc_enable_bits(nb_dev, 0x0, 0xf << 8, 5 << 8); + printk_info("rs780_gfx_init step2.\n"); + + /* step 2, TMDS, (only need if CMOS option is enabled) */ + if (cfg->gfx_tmds) { + } + +#if 1 /* external clock mode */ + /* table 5-22, 5.9.1. REFCLK */ + /* 5.9.1.1. Disables the GFX REFCLK transmitter so that the GFX + * REFCLK PAD can be driven by an external source. */ + /* 5.9.1.2. Enables GFX REFCLK receiver to receive the REFCLK from an external source. */ + set_nbmisc_enable_bits(nb_dev, 0x38, 1 << 29 | 1 << 28, 0 << 29 | 1 << 28); + + /* 5.9.1.3 Selects the GFX REFCLK to be the source for PLL A. */ + /* 5.9.1.4 Selects the GFX REFCLK to be the source for PLL B. */ + /* 5.9.1.5 Selects the GFX REFCLK to be the source for PLL C. */ + set_nbmisc_enable_bits(nb_dev, 0x28, 3 << 6 | 3 << 8 | 3 << 10, + 1 << 6 | 1 << 8 | 1 << 10); + reg32 = nbmisc_read_index(nb_dev, 0x28); + printk_info("misc 28 = %x\n", reg32); + + /* 5.9.1.6.Selects the single ended GFX REFCLK to be the source for core logic. */ + set_nbmisc_enable_bits(nb_dev, 0x6C, 1 << 31, 1 << 31); +#else /* internal clock mode */ + /* table 5-23, 5.9.1. REFCLK */ + /* 5.9.1.1. Enables the GFX REFCLK transmitter so that the GFX + * REFCLK PAD can be driven by the SB REFCLK. */ + /* 5.9.1.2. Disables GFX REFCLK receiver from receiving the + * REFCLK from an external source.*/ + set_nbmisc_enable_bits(nb_dev, 0x38, 1 << 29 | 1 << 28, 1 << 29 | 0 << 28); + + /* 5.9.1.3 Selects the GFX REFCLK to be the source for PLL A. */ + /* 5.9.1.4 Selects the GFX REFCLK to be the source for PLL B. */ + /* 5.9.1.5 Selects the GFX REFCLK to be the source for PLL C. */ + set_nbmisc_enable_bits(nb_dev, 0x28, 3 << 6 | 3 << 8 | 3 << 10, + 0); + reg32 = nbmisc_read_index(nb_dev, 0x28); + printk_info("misc 28 = %x\n", reg32); + + /* 5.9.1.6.Selects the single ended GFX REFCLK to be the source for core logic. */ + set_nbmisc_enable_bits(nb_dev, 0x6C, 1 << 31, 0 << 31); +#endif + + /* step 5.9.3, GFX overclocking, (only need if CMOS option is enabled) */ + /* 5.9.3.1. Increases PLL BW for 6G operation.*/ + /* set_nbmisc_enable_bits(nb_dev, 0x36, 0x3FF << 4, 0xB5 << 4); */ + /* skip */ + + /* step 5.9.4, reset the GFX link */ + /* step 5.9.4.1 asserts both calibration reset and global reset */ + set_nbmisc_enable_bits(nb_dev, 0x8, 0x3 << 14, 0x3 << 14); + + /* step 5.9.4.2 de-asserts calibration reset */ + set_nbmisc_enable_bits(nb_dev, 0x8, 1 << 14, 0 << 14); + + /* step 5.9.4.3 wait for at least 200us */ + udelay(300); + + /* step 5.9.4.4 de-asserts global reset */ + set_nbmisc_enable_bits(nb_dev, 0x8, 1 << 15, 0 << 15); + + /* 5.9.5 Reset PCIE_GFX Slot */ + /* It is done in mainboard.c */ + set_pcie_reset(); + mdelay(1); + set_pcie_dereset(); + + /* step 5.9.8 program PCIE memory mapped configuration space */ + /* done by enable_pci_bar3() before */ + + /* step 7 compliance state, (only need if CMOS option is enabled) */ + /* the compliance stete is just for test. refer to 4.2.5.2 of PCIe specification */ + if (cfg->gfx_compliance) { + /* force compliance */ + set_nbmisc_enable_bits(nb_dev, 0x32, 1 << 6, 1 << 6); + /* release hold training for device 2. GFX initialization is done. */ + set_nbmisc_enable_bits(nb_dev, 0x8, 1 << 4, 0 << 4); + dynamic_link_width_control(nb_dev, dev, cfg->gfx_link_width); + printk_info("rs780_gfx_init step7.\n"); + return; + } + + /* 5.9.12 Core Initialization. */ + /* 5.9.12.1 sets RCB timeout to be 25ms */ + /* 5.9.12.2. RCB Cpl timeout on link down. */ + set_pcie_enable_bits(dev, 0x70, 7 << 16 | 1 << 19, 4 << 16 | 1 << 19); + printk_info("rs780_gfx_init step5.9.12.1.\n"); + + /* step 5.9.12.3 disables slave ordering logic */ + set_pcie_enable_bits(nb_dev, 0x20, 1 << 8, 1 << 8); + printk_info("rs780_gfx_init step5.9.12.3.\n"); + + /* step 5.9.12.4 sets DMA payload size to 64 bytes */ + set_pcie_enable_bits(nb_dev, 0x10, 7 << 10, 4 << 10); + /* 5.9.12.5. Blocks DMA traffic during C3 state. */ + set_pcie_enable_bits(dev, 0x10, 1 << 0, 0 << 0); + + /* 5.9.12.6. Disables RC ordering logic */ + set_pcie_enable_bits(nb_dev, 0x20, 1 << 9, 1 << 9); + + /* Enabels TLP flushing. */ + /* Note: It is got from RS690. The system will hang without this action. */ + set_pcie_enable_bits(dev, 0x20, 1 << 19, 0 << 19); + + /* 5.9.12.7. Ignores DLLPs during L1 so that txclk can be turned off */ + set_pcie_enable_bits(nb_dev, 0x2, 1 << 0, 1 << 0); + + /* 5.9.12.8 Prevents LC to go from L0 to Rcv_L0s if L1 is armed. */ + set_pcie_enable_bits(dev, 0xA1, 1 << 11, 1 << 11); + + /* 5.9.12.9 CMGOOD_OVERRIDE for end point initiated lane degradation. */ + set_nbmisc_enable_bits(nb_dev, 0x6a, 1 << 17, 1 << 17); + printk_info("rs780_gfx_init step5.9.12.9.\n"); + + /* 5.9.12.10 Sets the timer in Config state from 20us to */ + /* 5.9.12.11 De-asserts RX_EN in L0s. */ + /* 5.9.12.12 Enables de-assertion of PG2RX_CR_EN to lock clock + * recovery parameter when lane is in electrical idle in L0s.*/ + set_pcie_enable_bits(dev, 0xB1, 1 << 23 | 1 << 19 | 1 << 28, 1 << 23 | 1 << 19 | 1 << 28); + + /* 5.9.12.13. Turns off offset calibration. */ + /* 5.9.12.14. Enables Rx Clock gating in CDR */ + set_nbmisc_enable_bits(nb_dev, 0x34, 1 << 10/* | 1 << 22 */, 1 << 10/* | 1 << 22 */); + + /* 5.9.12.15. Sets number of TX Clocks to drain TX Pipe to 3. */ + set_pcie_enable_bits(dev, 0xA0, 0xF << 4, 3 << 4); + + /* 5.9.12.16. Lets PI use Electrical Idle from PHY when + * turning off PLL in L1 at Gen2 speed instead Inferred Electrical Idle. */ + set_pcie_enable_bits(nb_dev, 0x40, 3 << 14, 2 << 14); + + /* 5.9.12.17. Prevents the Electrical Idle from causing a transition from Rcv_L0 to Rcv_L0s. */ + set_pcie_enable_bits(dev, 0xB1, 1 << 20, 1 << 20); + + /* 5.9.12.18. Prevents the LTSSM from going to Rcv_L0s if it has already + * acknowledged a request to go to L1. */ + set_pcie_enable_bits(dev, 0xA1, 1 << 11, 1 << 11); + + /* 5.9.12.19. LDSK only taking deskew on deskewing error detect */ + set_pcie_enable_bits(nb_dev, 0x40, 1 << 28, 0 << 28); + + /* 5.9.12.20. Bypasses lane de-skew logic if in x1 */ + set_pcie_enable_bits(nb_dev, 0xC2, 1 << 14, 1 << 14); + + /* 5.9.12.21. Sets Electrical Idle Threshold. */ + set_nbmisc_enable_bits(nb_dev, 0x35, 3 << 21, 2 << 21); + + /* 5.9.12.22. Advertises -6 dB de-emphasis value in TS1 Data Rate Identifier + * Only if CMOS Option in section. skip */ + + /* 5.9.12.23. Disables GEN2 capability of the device. */ + set_pcie_enable_bits(dev, 0xA4, 1 << 0, 0 << 0); + + /* 5.9.12.24.Disables advertising Upconfigure Support. */ + set_pcie_enable_bits(dev, 0xA2, 1 << 13, 1 << 13); + + /* 5.9.12.25. No comment in RPR. */ + set_nbmisc_enable_bits(nb_dev, 0x39, 1 << 10, 0 << 10); + + /* 5.9.12.26. This capacity is required since links wider than x1 and/or multiple link + * speed are supported */ + set_pcie_enable_bits(nb_dev, 0xC1, 1 << 0, 1 << 0); + + /* 5.9.12.27. Enables NVG86 ECO. A13 above only. */ + if (get_nb_rev(nb_dev) == REV_RS780_A12) /* A12 */ + set_pcie_enable_bits(dev, 0x02, 1 << 11, 1 << 11); + + /* 5.9.12.28 Hides and disables the completion timeout method. */ + set_pcie_enable_bits(nb_dev, 0xC1, 1 << 2, 0 << 2); + + /* 5.9.12.29. Use the bif_core de-emphasis strength by default. */ + /* set_nbmisc_enable_bits(nb_dev, 0x36, 1 << 28, 1 << 28); */ + + /* 5.9.12.30. Set TX arbitration algorithm to round robin */ + set_pcie_enable_bits(nb_dev, 0x1C, + 1 << 0 | 0x1F << 1 | 0x1F << 6, + 1 << 0 | 0x04 << 1 | 0x04 << 6); + + /* Single-port/Dual-port configureation. */ + switch (cfg->gfx_dual_slot) { + case 0: + single_port_configuration(nb_dev, dev); + break; + case 1: + dual_port_configuration(nb_dev, dev); + break; + default: + printk_info("Incorrect configuration of external gfx slot.\n"); + break; + } +} diff --git a/src/southbridge/amd/rs780/rs780_ht.c b/src/southbridge/amd/rs780/rs780_ht.c new file mode 100644 index 0000000000..5af19b1dcf --- /dev/null +++ b/src/southbridge/amd/rs780/rs780_ht.c @@ -0,0 +1,90 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include +#include +#include "rs780.h" + +/* for UMA internal graphics */ +void avoid_lpc_dma_deadlock(device_t nb_dev, device_t sb_dev) +{ + device_t cpu_f0; + u8 reg; + + cpu_f0 = dev_find_slot(0, PCI_DEVFN(0x18, 0)); + set_nbcfg_enable_bits(cpu_f0, 0x68, 3 << 21, 1 << 21); + + reg = nbpcie_p_read_index(sb_dev, 0x10); + reg |= 0x100; /* bit9=1 */ + nbpcie_p_write_index(sb_dev, 0x10, reg); + + reg = nbpcie_p_read_index(nb_dev, 0x10); + reg |= 0x100; /* bit9=1 */ + nbpcie_p_write_index(nb_dev, 0x10, reg); + + /* Enable NP protocol over PCIE for memory-mapped writes targeting LPC + * Set this bit to avoid a deadlock condition. */ + reg = htiu_read_index(nb_dev, 0x6); + reg |= 0x1000000; /* bit26 */ + htiu_write_index(nb_dev, 0x6, reg); +} + +static void pcie_init(struct device *dev) +{ + /* Enable pci error detecting */ + u32 dword; + + printk_info("pcie_init in rs780_ht.c\n"); + + /* System error enable */ + dword = pci_read_config32(dev, 0x04); + dword |= (1 << 8); /* System error enable */ + dword |= (1 << 30); /* Clear possible errors */ + pci_write_config32(dev, 0x04, dword); + + /* + * 1 is APIC enable + * 18 is enable nb to accept A4 interrupt request from SB. + */ + dword = pci_read_config32(dev, 0x4C); + dword |= 1 << 1 | 1 << 18; /* Clear possible errors */ + pci_write_config32(dev, 0x4C, dword); +} + +static struct pci_operations lops_pci = { + .set_subsystem = pci_dev_set_subsystem, +}; + +static struct device_operations ht_ops = { + .read_resources = pci_dev_read_resources, + .set_resources = pci_dev_set_resources, + .enable_resources = pci_dev_enable_resources, + .init = pcie_init, + .scan_bus = 0, + .ops_pci = &lops_pci, +}; + +static struct pci_driver ht_driver __pci_driver = { + .ops = &ht_ops, + .vendor = PCI_VENDOR_ID_AMD, + .device = PCI_DEVICE_ID_AMD_RS780_HT, +}; diff --git a/src/southbridge/amd/rs780/rs780_pcie.c b/src/southbridge/amd/rs780/rs780_pcie.c new file mode 100644 index 0000000000..b778af3aa6 --- /dev/null +++ b/src/southbridge/amd/rs780/rs780_pcie.c @@ -0,0 +1,449 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include +#include +#include +#include "rs780.h" + +/*------------------------------------------------ +* Global variable +------------------------------------------------*/ +PCIE_CFG AtiPcieCfg = { + PCIE_ENABLE_STATIC_DEV_REMAP, /* Config */ + 0, /* ResetReleaseDelay */ + 0, /* Gfx0Width */ + 0, /* Gfx1Width */ + 0, /* GfxPayload */ + 0, /* GppPayload */ + 0, /* PortDetect, filled by GppSbInit */ + 0, /* PortHp */ + 0, /* DbgConfig */ + 0, /* DbgConfig2 */ + 0, /* GfxLx */ + 0, /* GppLx */ + 0, /* NBSBLx */ + 0, /* PortSlotInit */ + 0, /* Gfx0Pwr */ + 0, /* Gfx1Pwr */ + 0 /* GppPwr */ +}; + +static void PciePowerOffGppPorts(device_t nb_dev, device_t dev, u32 port); +static void ValidatePortEn(device_t nb_dev); + +static void ValidatePortEn(device_t nb_dev) +{ +} + +/***************************************************************** +* Compliant with CIM_33's PCIEPowerOffGppPorts +* Power off unused GPP lines +*****************************************************************/ +static void PciePowerOffGppPorts(device_t nb_dev, device_t dev, u32 port) +{ + u32 reg; + u16 state_save; + struct southbridge_amd_rs780_config *cfg = + (struct southbridge_amd_rs780_config *)nb_dev->chip_info; + u8 state = cfg->port_enable; + + if (!(AtiPcieCfg.Config & PCIE_DISABLE_HIDE_UNUSED_PORTS)) + state &= AtiPcieCfg.PortDetect; + state = ~state; + state &= (1 << 4) + (1 << 5) + (1 << 6) + (1 << 7); + state_save = state << 17; + state &= !(AtiPcieCfg.PortHp); + reg = nbmisc_read_index(nb_dev, 0x0c); + reg |= state; + nbmisc_write_index(nb_dev, 0x0c, reg); + + reg = nbmisc_read_index(nb_dev, 0x08); + reg |= state_save; + nbmisc_write_index(nb_dev, 0x08, reg); + + if ((AtiPcieCfg.Config & PCIE_OFF_UNUSED_GPP_LANES) + && !(AtiPcieCfg. + Config & (PCIE_DISABLE_HIDE_UNUSED_PORTS + + PCIE_GFX_COMPLIANCE))) { + } + /* step 3 Power Down Control for Southbridge */ + reg = nbpcie_p_read_index(dev, 0xa2); + + switch ((reg >> 4) & 0x7) { /* get bit 4-6, LC_LINK_WIDTH_RD */ + case 1: + nbpcie_ind_write_index(nb_dev, 0x65, 0x0e0e); + break; + case 2: + nbpcie_ind_write_index(nb_dev, 0x65, 0x0c0c); + break; + default: + break; + } +} + +static void pcie_init(struct device *dev) +{ + /* Enable pci error detecting */ + u32 dword; + + printk_debug("pcie_init in rs780_pcie.c\n"); + + /* System error enable */ + dword = pci_read_config32(dev, 0x04); + dword |= (1 << 8); /* System error enable */ + dword |= (1 << 30); /* Clear possible errors */ + pci_write_config32(dev, 0x04, dword); +} + +/********************************************************************** +**********************************************************************/ +static void switching_gppsb_configurations(device_t nb_dev, device_t sb_dev) +{ + u32 reg; + struct southbridge_amd_rs780_config *cfg = + (struct southbridge_amd_rs780_config *)nb_dev->chip_info; + + /* 5.5.7.1-3 enables GPP reconfiguration */ + reg = nbmisc_read_index(nb_dev, PCIE_NBCFG_REG7); + reg |= + (RECONFIG_GPPSB_EN + RECONFIG_GPPSB_LINK_CONFIG + + RECONFIG_GPPSB_ATOMIC_RESET); + nbmisc_write_index(nb_dev, PCIE_NBCFG_REG7, reg); + + /* 5.5.7.4a. De-asserts STRAP_BIF_all_valid for PCIE-GPPSB core */ + reg = nbmisc_read_index(nb_dev, 0x66); + reg |= 1 << 31; + nbmisc_write_index(nb_dev, 0x66, reg); + /* 5.5.7.4b. sets desired GPPSB configurations, bit4-7 */ + reg = nbmisc_read_index(nb_dev, 0x67); + reg &= 0xFFFFff0f; /* clean */ + reg |= cfg->gppsb_configuration << 4; + nbmisc_write_index(nb_dev, 0x67, reg); + +#if 1 + /* NOTE: + * In CIMx 4.5.0 and RPR, 4c is done before 5 & 6. But in this way, + * a x4 device in port B (dev 4) of Configuration B can only be detected + * as x1, instead of x4. When the port B is being trained, the + * LC_CURRENT_STATE is 6 and the LC_LINK_WIDTH_RD is 1. We have + * to set the PCIEIND:0x65 as 0xE0E0 and reset the slot. Then the card + * seems to work in x1 mode. + * In the 2nd way below, we do the 5 & 6 before 4c. it conforms the + * CIMx 4.3.0. It conflicts with RPR. But based on the test result I've + * made so far, I haven't found any mistake. + */ + /* 5.5.7.4c. Asserts STRAP_BIF_all_valid for PCIE-GPPSB core */ + reg = nbmisc_read_index(nb_dev, 0x66); + reg &= ~(1 << 31); + nbmisc_write_index(nb_dev, 0x66, reg); + + /* 5.5.7.5-6. read bit14 and write back its inverst value */ + reg = nbmisc_read_index(nb_dev, PCIE_NBCFG_REG7); + reg ^= RECONFIG_GPPSB_GPPSB; + nbmisc_write_index(nb_dev, PCIE_NBCFG_REG7, reg); +#else + /* 5.5.7.5-6. read bit14 and write back its inverst value */ + reg = nbmisc_read_index(nb_dev, PCIE_NBCFG_REG7); + reg ^= RECONFIG_GPPSB_GPPSB; + nbmisc_write_index(nb_dev, PCIE_NBCFG_REG7, reg); + + /* 5.5.7.4c. Asserts STRAP_BIF_all_valid for PCIE-GPPSB core */ + reg = nbmisc_read_index(nb_dev, 0x66); + reg &= ~(1 << 31); + nbmisc_write_index(nb_dev, 0x66, reg); +#endif + /* 5.5.7.7. delay 1ms */ + mdelay(1); + + /* 5.5.7.8. waits until SB has trained to L0, poll for bit0-5 = 0x10 */ + do { + reg = nbpcie_p_read_index(sb_dev, PCIE_LC_STATE0); + reg &= 0x3f; /* remain LSB [5:0] bits */ + } while (LC_STATE_RECONFIG_GPPSB != reg); + + /* 5.5.7.9.ensures that virtual channel negotiation is completed. poll for bit1 = 0 */ + do { + reg = + pci_ext_read_config32(nb_dev, sb_dev, + PCIE_VC0_RESOURCE_STATUS); + } while (reg & VC_NEGOTIATION_PENDING); +} + +static void switching_gpp_configurations(device_t nb_dev, device_t sb_dev) +{ + u32 reg; + struct southbridge_amd_rs780_config *cfg = + (struct southbridge_amd_rs780_config *)nb_dev->chip_info; + + /* 5.6.2.1. De-asserts STRAP_BIF_all_valid for PCIE-GPP core */ + reg = nbmisc_read_index(nb_dev, 0x22); + reg |= 1 << 14; + nbmisc_write_index(nb_dev, 0x22, reg); + /* 5.6.2.2. sets desired GPPSB configurations, bit4-7 */ + reg = nbmisc_read_index(nb_dev, 0x2D); + reg &= ~(0xF << 7); /* clean */ + reg |= cfg->gpp_configuration << 7; + nbmisc_write_index(nb_dev, 0x2D, reg); + /* 5.6.2.3. Asserts STRAP_BIF_all_valid for PCIE-GPP core */ + reg = nbmisc_read_index(nb_dev, 0x22); + reg &= ~(1 << 14); + nbmisc_write_index(nb_dev, 0x22, reg); +} + +/***************************************************************** +* The rs780 uses NBCONFIG:0x1c (BAR3) to map the PCIE Extended Configuration +* Space to a 256MB range within the first 4GB of addressable memory. +*****************************************************************/ +void enable_pcie_bar3(device_t nb_dev) +{ + printk_debug("enable_pcie_bar3()\n"); + set_nbcfg_enable_bits(nb_dev, 0x7C, 1 << 30, 1 << 30); /* Enables writes to the BAR3 register. */ + set_nbcfg_enable_bits(nb_dev, 0x84, 7 << 16, 0 << 16); + + pci_write_config32(nb_dev, 0x1C, EXT_CONF_BASE_ADDRESS); /* PCIEMiscInit */ + pci_write_config32(nb_dev, 0x20, 0x00000000); + set_htiu_enable_bits(nb_dev, 0x32, 1 << 28, 1 << 28); /* PCIEMiscInit */ + ProgK8TempMmioBase(1, EXT_CONF_BASE_ADDRESS, TEMP_MMIO_BASE_ADDRESS); +} + +/***************************************************************** +* We should disable bar3 when we want to exit rs780_enable, because bar3 will be +* remapped in set_resource later. +*****************************************************************/ +void disable_pcie_bar3(device_t nb_dev) +{ + printk_debug("disable_pcie_bar3()\n"); + pci_write_config32(nb_dev, 0x1C, 0); /* clear BAR3 address */ + set_nbcfg_enable_bits(nb_dev, 0x7C, 1 << 30, 0 << 30); /* Disable writes to the BAR3. */ + ProgK8TempMmioBase(0, EXT_CONF_BASE_ADDRESS, TEMP_MMIO_BASE_ADDRESS); +} + +/***************************************** +* Compliant with CIM_33's PCIEGPPInit +* nb_dev: +* root bridge struct +* dev: +* p2p bridge struct +* port: +* p2p bridge number, 4-10 +*****************************************/ +void rs780_gpp_sb_init(device_t nb_dev, device_t dev, u32 port) +{ + u8 reg8; + u16 reg16; + device_t sb_dev; + u32 gfx_gpp_sb_sel; + struct southbridge_amd_rs780_config *cfg = + (struct southbridge_amd_rs780_config *)nb_dev->chip_info; + printk_debug("gpp_sb_init nb_dev=0x%p, dev=0x%p, port=0x%p\n", nb_dev, dev, port); + + gfx_gpp_sb_sel = port >= 4 && port <= 8 ? + PCIE_CORE_INDEX_GPPSB : /* 4,5,6,7,8 */ + PCIE_CORE_INDEX_GPP; /* 9,10 */ + /* init GPP core */ + /* 5.10.8.3. Disable slave ordering logic */ + set_pcie_enable_bits(nb_dev, 0x20 | gfx_gpp_sb_sel, 1 << 8, + 1 << 8); + /* 5.10.8.7. PCIE initialization 5.10.2: rpr 2.12*/ + set_pcie_enable_bits(nb_dev, 0x02 | gfx_gpp_sb_sel, 1 << 0, 1 << 0); /* no description in datasheet. */ + + /* init GPPSB port. rpr 5.10.8 */ + /* 5.10.8.1-5.10.8.2. Sets RCB timeout to be 100ms/4=25ms by setting bits[18:16] to 3 h4 + * and shortens the enumeration timer by setting bit[19] to 1 + */ + set_pcie_enable_bits(dev, 0x70, 0xF << 16, 0x4 << 16 | 1 << 19); + /* 5.10.8.4. Sets DMA payload size to 64 bytes. */ + set_pcie_enable_bits(nb_dev, 0x10 | gfx_gpp_sb_sel, 7 << 10, 4 << 10); + /* 5.10.8.6. Disable RC ordering logic */ + set_pcie_enable_bits(nb_dev, 0x20 | gfx_gpp_sb_sel, 1 << 9, 1 << 9); + /* 5.10.8.7. Ignores DLLs druing L1 */ + set_pcie_enable_bits(nb_dev, 0x02 | gfx_gpp_sb_sel, 1 << 0, 1 << 0); + /* 5.10.8.8. Prevents LCto go from L0 to Rcv_L0s if L1 is armed. */ + set_pcie_enable_bits(dev, 0xA1, 1 << 11, 1 << 11); + /* 5.10.8.9. Sets timer in Config state from 20us to 1us. + * 5.10.8.10. De-asserts RX_EN in L0s + * 5.10.8.11. Enables de-assertion of PG2RX_CR_EN to lock clock recovery parameter when .. */ + set_pcie_enable_bits(dev, 0xB1, 1 << 23 | 1 << 19 | 1 << 28, 1 <<23 | 1 << 19 | 1 << 28); + /* 5.10.8.12. Turns off offset calibration */ + /* 5.10.8.13. Enables Rx Clock gating in CDR */ + if (gfx_gpp_sb_sel == PCIE_CORE_INDEX_GPPSB) + set_nbmisc_enable_bits(nb_dev, 0x67, 1 << 14 | 1 << 26, 1 << 14 | 1 << 26); /* 4,5,6,7 */ + else + set_nbmisc_enable_bits(nb_dev, 0x24, 1 << 29 | 1 << 28, 1 << 29 | 1 << 28); /* 9,10 */ + /* 5.10.8.14. Sets number of TX Clocks to drain TX Pipe to 3 */ + set_pcie_enable_bits(dev, 0xA0, 0xF << 4, 0x3 << 4); + /* 5.10.8.15. empty */ + /* 5.10.8.16. P_ELEC_IDLE_MODE */ + set_pcie_enable_bits(nb_dev, 0x40 | gfx_gpp_sb_sel, 0x3 << 14, 0x2 << 14); + /* 5.10.8.17. LC_BLOCK_EL_IDLE_IN_L0 */ + set_pcie_enable_bits(dev, 0xB1, 1 << 20, 1 << 20); + /* 5.10.8.18. LC_DONT_GO_TO_L0S_IFL1_ARMED */ + set_pcie_enable_bits(dev, 0xA1, 1 << 11, 1 << 11); + /* 5.10.8.19. RXP_REALIGN_ON_EACH_TSX_OR_SKP */ + set_pcie_enable_bits(nb_dev, 0x40 | gfx_gpp_sb_sel, 1 << 28, 0 << 28); + /* 5.10.8.20. Bypass lane de-skew logic if in x1 */ + set_pcie_enable_bits(nb_dev, 0xC2 | gfx_gpp_sb_sel, 1 << 14, 1 << 14); + /* 5.10.8.21. sets electrical idle threshold. */ + if (gfx_gpp_sb_sel == PCIE_CORE_INDEX_GPPSB) + set_nbmisc_enable_bits(nb_dev, 0x6A, 3 << 22, 2 << 22); + else + set_nbmisc_enable_bits(nb_dev, 0x24, 3 << 16, 2 << 16); + + /* 5.10.8.22. Disable GEN2 */ + /* TODO: should be 2 seperated cases. */ + set_nbmisc_enable_bits(nb_dev, 0x39, 1 << 31, 0 << 31); + set_nbmisc_enable_bits(nb_dev, 0x22, 1 << 5, 0 << 5); + set_nbmisc_enable_bits(nb_dev, 0x34, 1 << 31, 0 << 31); + set_nbmisc_enable_bits(nb_dev, 0x37, 7 << 5, 0 << 5); + /* 5.10.8.23. Disables GEN2 capability of the device. RPR says enable? No! */ + set_pcie_enable_bits(dev, 0xA4, 1 << 0, 0 << 0); + /* 5.10.8.24. Disable advertising upconfigure support. */ + set_pcie_enable_bits(dev, 0xA2, 1 << 13, 1 << 13); + /* 5.10.8.25-26. STRAP_BIF_DSN_EN */ + if (gfx_gpp_sb_sel == PCIE_CORE_INDEX_GPPSB) + set_nbmisc_enable_bits(nb_dev, 0x68, 1 << 19, 0 << 19); + else + set_nbmisc_enable_bits(nb_dev, 0x22, 1 << 3, 0 << 3); + /* 5.10.8.27-28. */ + set_pcie_enable_bits(nb_dev, 0xC1 | gfx_gpp_sb_sel, 1 << 0 | 1 << 2, 1 << 0 | 0 << 2); + /* 5.10.8.29. Uses the bif_core de-emphasis strength by default. */ + if (gfx_gpp_sb_sel == PCIE_CORE_INDEX_GPPSB) { + set_nbmisc_enable_bits(nb_dev, 0x67, 1 << 10, 1 << 10); + set_nbmisc_enable_bits(nb_dev, 0x36, 1 << 29, 1 << 29); + } + else { + set_nbmisc_enable_bits(nb_dev, 0x39, 1 << 30, 1 << 30); + } + /* 5.10.8.30. Set TX arbitration algorithm to round robin. */ + set_pcie_enable_bits(nb_dev, 0x1C | gfx_gpp_sb_sel, + 1 << 0 | 0x1F << 1 | 0x1F << 6, + 1 << 0 | 0x04 << 1 | 0x04 << 6); + + /* check compliance rpr step 2.1*/ + if (AtiPcieCfg.Config & PCIE_GPP_COMPLIANCE) { + u32 tmp; + tmp = nbmisc_read_index(nb_dev, 0x67); + tmp |= 1 << 3; + nbmisc_write_index(nb_dev, 0x67, tmp); + } + + /* step 5: dynamic slave CPL buffer allocation. Disable it, otherwise linux hangs. Why? */ + /* set_pcie_enable_bits(nb_dev, 0x20 | gfx_gpp_sb_sel, 1 << 11, 1 << 11); */ + + /* step 5a: Training for GPP devices */ + /* init GPP */ + switch (port) { + case 4: /* GPP */ + case 5: + case 6: + case 7: + case 9: + case 10: + /* 5.10.8.5. Blocks DMA traffic during C3 state */ + set_pcie_enable_bits(dev, 0x10, 1 << 0, 0 << 0); + /* Enabels TLP flushing */ + set_pcie_enable_bits(dev, 0x20, 1 << 19, 0 << 19); + + /* check port enable */ + if (cfg->port_enable & (1 << port)) { + PcieReleasePortTraining(nb_dev, dev, port); + if (!(AtiPcieCfg.Config & PCIE_GPP_COMPLIANCE)) { + u8 res = PcieTrainPort(nb_dev, dev, port); + printk_debug("PcieTrainPort port=0x%x result=%d\n", port, res); + if (res) { + AtiPcieCfg.PortDetect |= 1 << port; + } + } + } + break; + case 8: /* SB */ + break; + } + PciePowerOffGppPorts(nb_dev, dev, port); +} + +/***************************************** +* Compliant with CIM_33's PCIEConfigureGPPCore +*****************************************/ +void config_gpp_core(device_t nb_dev, device_t sb_dev) +{ + u32 reg; + struct southbridge_amd_rs780_config *cfg = + (struct southbridge_amd_rs780_config *)nb_dev->chip_info; + + reg = nbmisc_read_index(nb_dev, 0x20); + if (AtiPcieCfg.Config & PCIE_ENABLE_STATIC_DEV_REMAP) + reg &= 0xfffffffd; /* set bit1 = 0 */ + else + reg |= 0x2; /* set bit1 = 1 */ + nbmisc_write_index(nb_dev, 0x20, reg); + + reg = nbmisc_read_index(nb_dev, 0x67); /* get STRAP_BIF_LINK_CONFIG_GPPSB at bit 4-7 */ + if (cfg->gppsb_configuration != ((reg >> 4) & 0xf)) + switching_gppsb_configurations(nb_dev, sb_dev); + reg = nbmisc_read_index(nb_dev, 0x2D); /* get STRAP_BIF_LINK_CONFIG_GPP at bit 7-10 */ + if (cfg->gpp_configuration != ((reg >> 7) & 0xf)) + switching_gpp_configurations(nb_dev, sb_dev); + ValidatePortEn(nb_dev); +} + +/***************************************** +* Compliant with CIM_33's PCIEMiscClkProg +*****************************************/ +void pcie_config_misc_clk(device_t nb_dev) +{ + u32 reg; + struct bus pbus; /* fake bus for dev0 fun1 */ + + reg = pci_read_config32(nb_dev, 0x4c); + reg |= 1 << 0; + pci_write_config32(nb_dev, 0x4c, reg); + + if (AtiPcieCfg.Config & PCIE_GFX_CLK_GATING) { + /* TXCLK Clock Gating */ + set_nbmisc_enable_bits(nb_dev, 0x07, 3 << 0, 3 << 0); + set_nbmisc_enable_bits(nb_dev, 0x07, 1 << 22, 1 << 22); + set_pcie_enable_bits(nb_dev, 0x11 | PCIE_CORE_INDEX_GFX, (3 << 6) | (~0xf), 3 << 6); + + /* LCLK Clock Gating */ + reg = pci_cf8_conf1.read32(&pbus, 0, 1, 0x94); + reg &= ~(1 << 16); + pci_cf8_conf1.write32(&pbus, 0, 1, 0x94, reg); + } + + if (AtiPcieCfg.Config & PCIE_GPP_CLK_GATING) { + /* TXCLK Clock Gating */ + set_nbmisc_enable_bits(nb_dev, 0x07, 3 << 4, 3 << 4); + set_nbmisc_enable_bits(nb_dev, 0x07, 1 << 22, 1 << 22); + set_pcie_enable_bits(nb_dev, 0x11 | PCIE_CORE_INDEX_GPPSB, (3 << 6) | (~0xf), 3 << 6); + + /* LCLK Clock Gating */ + reg = pci_cf8_conf1.read32(&pbus, 0, 1, 0x94); + reg &= ~(1 << 24); + pci_cf8_conf1.write32(&pbus, 0, 1, 0x94, reg); + } + + reg = pci_read_config32(nb_dev, 0x4c); + reg &= ~(1 << 0); + pci_write_config32(nb_dev, 0x4c, reg); +} diff --git a/src/southbridge/amd/rs780/rs780_rev.h b/src/southbridge/amd/rs780/rs780_rev.h new file mode 100644 index 0000000000..94ab752f9f --- /dev/null +++ b/src/southbridge/amd/rs780/rs780_rev.h @@ -0,0 +1,27 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef __RS780_REV_H__ +#define __RS780_REV_H__ + +#define REV_RS780_A11 0 +#define REV_RS780_A12 1 +#define REV_RS780_A13 2 + +#endif /* __RS780_REV_H__ */ -- cgit v1.2.3