From 4979ffc5cb267c7b0a5ad84c8bb9729e6b5613b1 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ky=C3=B6sti=20M=C3=A4lkki?= Date: Thu, 24 May 2018 00:26:26 +0300 Subject: Remove southbridges after K8 board removals MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Change-Id: Ib6935c026e2302b037fc82be64163f10bf775751 Signed-off-by: Kyösti Mälkki Reviewed-on: https://review.coreboot.org/26672 Tested-by: build bot (Jenkins) Reviewed-by: Arthur Heymans --- src/southbridge/amd/sb600/Kconfig | 54 --- src/southbridge/amd/sb600/Makefile.inc | 16 - src/southbridge/amd/sb600/ac97.c | 57 --- src/southbridge/amd/sb600/bootblock.c | 65 --- src/southbridge/amd/sb600/chip.h | 24 -- src/southbridge/amd/sb600/early_setup.c | 636 ---------------------------- src/southbridge/amd/sb600/enable_usbdebug.c | 34 -- src/southbridge/amd/sb600/hda.c | 325 -------------- src/southbridge/amd/sb600/ide.c | 63 --- src/southbridge/amd/sb600/lpc.c | 254 ----------- src/southbridge/amd/sb600/pci.c | 138 ------ src/southbridge/amd/sb600/reset.c | 31 -- src/southbridge/amd/sb600/sata.c | 271 ------------ src/southbridge/amd/sb600/sb600.c | 227 ---------- src/southbridge/amd/sb600/sb600.h | 48 --- src/southbridge/amd/sb600/sm.c | 370 ---------------- src/southbridge/amd/sb600/smbus.c | 210 --------- src/southbridge/amd/sb600/smbus.h | 60 --- src/southbridge/amd/sb600/usb.c | 168 -------- 19 files changed, 3051 deletions(-) delete mode 100644 src/southbridge/amd/sb600/Kconfig delete mode 100644 src/southbridge/amd/sb600/Makefile.inc delete mode 100644 src/southbridge/amd/sb600/ac97.c delete mode 100644 src/southbridge/amd/sb600/bootblock.c delete mode 100644 src/southbridge/amd/sb600/chip.h delete mode 100644 src/southbridge/amd/sb600/early_setup.c delete mode 100644 src/southbridge/amd/sb600/enable_usbdebug.c delete mode 100644 src/southbridge/amd/sb600/hda.c delete mode 100644 src/southbridge/amd/sb600/ide.c delete mode 100644 src/southbridge/amd/sb600/lpc.c delete mode 100644 src/southbridge/amd/sb600/pci.c delete mode 100644 src/southbridge/amd/sb600/reset.c delete mode 100644 src/southbridge/amd/sb600/sata.c delete mode 100644 src/southbridge/amd/sb600/sb600.c delete mode 100644 src/southbridge/amd/sb600/sb600.h delete mode 100644 src/southbridge/amd/sb600/sm.c delete mode 100644 src/southbridge/amd/sb600/smbus.c delete mode 100644 src/southbridge/amd/sb600/smbus.h delete mode 100644 src/southbridge/amd/sb600/usb.c (limited to 'src/southbridge/amd/sb600') diff --git a/src/southbridge/amd/sb600/Kconfig b/src/southbridge/amd/sb600/Kconfig deleted file mode 100644 index c4f3ea046f..0000000000 --- a/src/southbridge/amd/sb600/Kconfig +++ /dev/null @@ -1,54 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2008-2009 coresystems GmbH -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## - -config SOUTHBRIDGE_AMD_SB600 - bool - select IOAPIC - select HAVE_USBDEBUG - select HAVE_HARD_RESET - -if SOUTHBRIDGE_AMD_SB600 -config BOOTBLOCK_SOUTHBRIDGE_INIT - string - default "southbridge/amd/sb600/bootblock.c" - -config EHCI_BAR - hex - default 0xfef00000 - -choice - prompt "SATA Mode" - default SATA_MODE_IDE - help - Select the mode in which SATA should be driven. IDE or AHCI. - The default is IDE. - - config SATA_MODE_IDE - bool "IDE" - - config SATA_MODE_AHCI - bool "AHCI" -endchoice - -config SATA_MODE - int - default 1 if SATA_MODE_IDE - default 0 if SATA_MODE_AHCI - -config HPET_MIN_TICKS - hex - default 0x14 - -endif diff --git a/src/southbridge/amd/sb600/Makefile.inc b/src/southbridge/amd/sb600/Makefile.inc deleted file mode 100644 index cd5bb6166d..0000000000 --- a/src/southbridge/amd/sb600/Makefile.inc +++ /dev/null @@ -1,16 +0,0 @@ -ifeq ($(CONFIG_SOUTHBRIDGE_AMD_SB600),y) - -ramstage-y += sb600.c -ramstage-y += usb.c -ramstage-y += lpc.c -ramstage-y += sm.c -ramstage-y += ide.c -ramstage-y += sata.c -ramstage-y += hda.c -ramstage-y += ac97.c -ramstage-y += pci.c -ramstage-y += reset.c -romstage-$(CONFIG_USBDEBUG_IN_ROMSTAGE) += enable_usbdebug.c -ramstage-$(CONFIG_USBDEBUG) += enable_usbdebug.c - -endif diff --git a/src/southbridge/amd/sb600/ac97.c b/src/southbridge/amd/sb600/ac97.c deleted file mode 100644 index 2b65617e71..0000000000 --- a/src/southbridge/amd/sb600/ac97.c +++ /dev/null @@ -1,57 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include -#include -#include -#include -#include -#include "sb600.h" - -static struct pci_operations lops_pci = { - .set_subsystem = pci_dev_set_subsystem, -}; - -static struct device_operations ac97audio_ops = { - .read_resources = pci_dev_read_resources, - .set_resources = pci_dev_set_resources, - .enable_resources = pci_dev_enable_resources, -/* .enable = sb600_enable, */ - .init = 0, - .scan_bus = 0, - .ops_pci = &lops_pci, -}; - -static const struct pci_driver ac97audio_driver __pci_driver = { - .ops = &ac97audio_ops, - .vendor = PCI_VENDOR_ID_ATI, - .device = PCI_DEVICE_ID_ATI_SB600_ACI, -}; - -static struct device_operations ac97modem_ops = { - .read_resources = pci_dev_read_resources, - .set_resources = pci_dev_set_resources, - .enable_resources = pci_dev_enable_resources, -/* .enable = sb600_enable, */ - .init = 0, - .scan_bus = 0, - .ops_pci = &lops_pci, -}; - -static const struct pci_driver ac97modem_driver __pci_driver = { - .ops = &ac97modem_ops, - .vendor = PCI_VENDOR_ID_ATI, - .device = PCI_DEVICE_ID_ATI_SB600_MCI, -}; diff --git a/src/southbridge/amd/sb600/bootblock.c b/src/southbridge/amd/sb600/bootblock.c deleted file mode 100644 index 8b2901a8d5..0000000000 --- a/src/southbridge/amd/sb600/bootblock.c +++ /dev/null @@ -1,65 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include -#include -#include - -/* - * Enable 4MB (LPC) ROM access at 0xFFC00000 - 0xFFFFFFFF. - * - * Hardware should enable LPC ROM by pin straps. This function does not - * handle the theoretically possible PCI ROM, FWH, or SPI ROM configurations. - * - * The SB600 power-on default is to map 256K ROM space. - * - * Details: AMD SB600 BIOS Developer's Guide (BDG), page 15. - */ -static void sb600_enable_rom(void) -{ - u8 reg8; - pci_devfn_t dev; - - dev = pci_io_locate_device(PCI_ID(PCI_VENDOR_ID_ATI, - PCI_DEVICE_ID_ATI_SB600_LPC), 0); - - /* Decode variable LPC ROM address ranges 1 and 2. */ - reg8 = pci_io_read_config8(dev, 0x48); - reg8 |= (1 << 3) | (1 << 4); - pci_io_write_config8(dev, 0x48, reg8); - - /* LPC ROM address range 1: */ - /* Enable LPC ROM range mirroring start at 0x000e(0000). */ - pci_io_write_config16(dev, 0x68, 0x000e); - /* Enable LPC ROM range mirroring end at 0x000f(ffff). */ - pci_io_write_config16(dev, 0x6a, 0x000f); - - /* LPC ROM address range 2: */ - /* - * Enable LPC ROM range start at: - * 0xfff8(0000): 512KB - * 0xfff0(0000): 1MB - * 0xffe0(0000): 2MB - * 0xffc0(0000): 4MB - */ - pci_io_write_config16(dev, 0x6c, 0x10000 - (CONFIG_COREBOOT_ROMSIZE_KB >> 6)); /* 4 MB */ - /* Enable LPC ROM range end at 0xffff(ffff). */ - pci_io_write_config16(dev, 0x6e, 0xffff); -} - -static void bootblock_southbridge_init(void) -{ - sb600_enable_rom(); -} diff --git a/src/southbridge/amd/sb600/chip.h b/src/southbridge/amd/sb600/chip.h deleted file mode 100644 index 951ae42c27..0000000000 --- a/src/southbridge/amd/sb600/chip.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef SB600_CHIP_H -#define SB600_CHIP_H - -struct southbridge_amd_sb600_config -{ - u32 hda_viddid; -}; - -#endif /* SB600_CHIP_H */ diff --git a/src/southbridge/amd/sb600/early_setup.c b/src/southbridge/amd/sb600/early_setup.c deleted file mode 100644 index f68bfd51ee..0000000000 --- a/src/southbridge/amd/sb600/early_setup.c +++ /dev/null @@ -1,636 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include -#include -#include "sb600.h" -#include "smbus.c" - -#define SMBUS_IO_BASE 0x1000 /* Is it a temporary SMBus I/O base address? */ - /*SIZE 0x40 */ - -static void pmio_write(u8 reg, u8 value) -{ - outb(reg, PM_INDEX); - outb(value, PM_INDEX + 1); -} - -static u8 pmio_read(u8 reg) -{ - outb(reg, PM_INDEX); - return inb(PM_INDEX + 1); -} - -/* RPR 2.1: Get SB ASIC Revision. */ -static u8 get_sb600_revision(void) -{ - pci_devfn_t dev; - dev = pci_locate_device(PCI_ID(0x1002, 0x4385), 0); - - if (dev == PCI_DEV_INVALID) { - die("SMBUS controller not found\n"); - /* NOT REACHED */ - } - return pci_read_config8(dev, 0x08); -} - - -/*************************************** -* Legacy devices are mapped to LPC space. -* Serial port 0, 1 -* KBC Port -* ACPI Micro-controller port -* This function does not change port 0x80 decoding. -* Console output through any port besides 0x2f8/0x3f8 is unsupported. -* If you use FWH ROMs, you have to setup IDSEL. -* Reviewed-by: Carl-Daniel Hailfinger -* Reviewed against AMD SB600 Register Reference Manual rev. 3.03, section 3.1 -* (LPC ISA Bridge) -***************************************/ -static void sb600_lpc_init(void) -{ - u8 reg8; - u32 reg32; - pci_devfn_t dev; - - dev = pci_locate_device(PCI_ID(0x1002, 0x4385), 0); /* SMBUS controller */ - /* NOTE: Set BootTimerDisable, otherwise it would keep rebooting!! - * This bit has no meaning if debug strap is not enabled. So if the - * board keeps rebooting and the code fails to reach here, we could - * disable the debug strap first. */ - reg32 = pci_read_config32(dev, 0x4C); - reg32 |= 1 << 31; - pci_write_config32(dev, 0x4C, reg32); - - /* Enable lpc controller */ - reg32 = pci_read_config32(dev, 0x64); - reg32 |= 1 << 20; - pci_write_config32(dev, 0x64, reg32); - - dev = pci_locate_device(PCI_ID(0x1002, 0x438d), 0); /* LPC Controller */ - /* Decode port 0x3f8-0x3ff (Serial 0), 0x2f8-0x2ff (Serial 1) */ - reg8 = pci_read_config8(dev, 0x44); - reg8 |= (1 << 6) | (1 << 7); - pci_write_config8(dev, 0x44, reg8); - - /* Decode port 0x60 & 0x64 (PS/2 keyboard) and port 0x62 & 0x66 (ACPI)*/ - reg8 = pci_read_config8(dev, 0x47); - reg8 |= (1 << 5) | (1 << 6); - pci_write_config8(dev, 0x47, reg8); - - /* Super I/O, RTC */ - reg8 = pci_read_config8(dev, 0x48); - /* Decode ports 0x2e-0x2f, 0x4e-0x4f (SuperI/O configuration) */ - reg8 |= (1 << 1) | (1 << 0); - /* Decode port 0x70-0x73 (RTC) */ - reg8 |= (1 << 6); - pci_write_config8(dev, 0x48, reg8); -} - -/* what is its usage? */ -static u32 get_sbdn(u32 bus) -{ - pci_devfn_t dev; - - /* Find the device. */ - dev = pci_locate_device_on_bus(PCI_ID(0x1002, 0x4385), bus); - return (dev >> 15) & 0x1f; -} - -static u8 dual_core(void) -{ - return (pci_read_config32(PCI_DEV(0, 0x18, 3), 0xE8) & (0x3<<12)) != 0; -} - -/* - * SB600 VFSMAF (VID/FID System Management Action Field) is 010b by default. - * RPR 2.3.3 C-state and VID/FID change for the K8 platform. -*/ -static void enable_fid_change_on_sb(u32 sbbusn, u32 sbdn) -{ - u8 byte; - byte = pmio_read(0x9a); - byte &= ~0x34; - if (dual_core()) - byte |= 0x34; - else - byte |= 0x04; - pmio_write(0x9a, byte); - - byte = pmio_read(0x8f); - byte &= ~0x30; - byte |= 0x20; - pmio_write(0x8f, byte); - - pmio_write(0x8b, 0x01); - pmio_write(0x8a, 0x90); - - if (get_sb600_revision() > 0x13) - pmio_write(0x88, 0x10); - else - pmio_write(0x88, 0x06); - - byte = pmio_read(0x7c); - byte &= ~0x01; - byte |= 0x01; - pmio_write(0x7c, byte); - - /* Must be 0 for K8 platform. */ - byte = pmio_read(0x68); - byte &= ~0x01; - pmio_write(0x68, byte); - /* Must be 0 for K8 platform. */ - byte = pmio_read(0x8d); - byte &= ~(1<<6); - pmio_write(0x8d, byte); - - byte = pmio_read(0x61); - byte &= ~0x04; - pmio_write(0x61, byte); - - byte = pmio_read(0x42); - byte &= ~0x04; - pmio_write(0x42, byte); - - if (get_sb600_revision() == 0x14) { - pmio_write(0x89, 0x10); - - byte = pmio_read(0x52); - byte |= 0x80; - pmio_write(0x52, byte); - } -} - -void do_hard_reset(void) -{ - set_bios_reset(); - - /* full reset */ - outb(0x0a, 0x0cf9); - outb(0x0e, 0x0cf9); -} - -void do_soft_reset(void) -{ - set_bios_reset(); - /* link reset */ - outb(0x06, 0x0cf9); -} - -void sb600_pci_port80(void) -{ - u8 byte; - pci_devfn_t dev; - - /* P2P Bridge */ - dev = pci_locate_device(PCI_ID(0x1002, 0x4384), 0); - - /* Chip Control: Enable subtractive decoding */ - byte = pci_read_config8(dev, 0x40); - byte |= 1 << 5; - pci_write_config8(dev, 0x40, byte); - - /* Misc Control: Enable subtractive decoding if 0x40 bit 5 is set */ - byte = pci_read_config8(dev, 0x4B); - byte |= 1 << 7; - pci_write_config8(dev, 0x4B, byte); - - /* The same IO Base and IO Limit here is meaningful because we set the - * bridge to be subtractive. During early setup stage, we have to make - * sure that data can go through port 0x80. - */ - /* IO Base: 0xf000 */ - byte = pci_read_config8(dev, 0x1C); - byte |= 0xF << 4; - pci_write_config8(dev, 0x1C, byte); - - /* IO Limit: 0xf000 */ - byte = pci_read_config8(dev, 0x1D); - byte |= 0xF << 4; - pci_write_config8(dev, 0x1D, byte); - - /* PCI Command: Enable IO response */ - byte = pci_read_config8(dev, 0x04); - byte |= 1 << 0; - pci_write_config8(dev, 0x04, byte); - - /* LPC controller */ - dev = pci_locate_device(PCI_ID(0x1002, 0x438D), 0); - - byte = pci_read_config8(dev, 0x4A); - byte &= ~(1 << 5); /* disable lpc port 80 */ - pci_write_config8(dev, 0x4A, byte); -} - -void sb600_lpc_port80(void) -{ - u8 byte; - pci_devfn_t dev; - u32 reg32; - - /* Enable LPC controller */ - dev = pci_locate_device(PCI_ID(0x1002, 0x4385), 0); - reg32 = pci_read_config32(dev, 0x64); - reg32 |= 0x00100000; /* lpcEnable */ - pci_write_config32(dev, 0x64, reg32); - - /* Enable port 80 LPC decode in pci function 3 configuration space. */ - dev = pci_locate_device(PCI_ID(0x1002, 0x438d), 0); - byte = pci_read_config8(dev, 0x4a); - byte |= 1 << 5; /* enable port 80 */ - pci_write_config8(dev, 0x4a, byte); -} - -/* sbDevicesPorInitTable */ -static void sb600_devices_por_init(void) -{ - pci_devfn_t dev; - u8 byte; - - printk(BIOS_INFO, "sb600_devices_por_init()\n"); - /* SMBus Device, BDF:0-20-0 */ - printk(BIOS_INFO, "sb600_devices_por_init(): SMBus Device, BDF:0-20-0\n"); - dev = pci_locate_device(PCI_ID(0x1002, 0x4385), 0); - - if (dev == PCI_DEV_INVALID) { - die("SMBUS controller not found\n"); - /* NOT REACHED */ - } - printk(BIOS_INFO, "SMBus controller enabled, sb revision is 0x%x\n", - get_sb600_revision()); - - /* sbPorAtStartOfTblCfg */ - /* Set A-Link bridge access address. This address is set at device 14h, function 0, register 0xf0. - * This is an I/O address. The I/O address must be on 16-byte boundary. */ - pci_write_config32(dev, 0xf0, AB_INDX); - - /* To enable AB/BIF DMA access, a specific register inside the BIF register space needs to be configured first. */ - /*Enables the SB600 to send transactions upstream over A-Link Express interface. */ - axcfg_reg(0x04, 1 << 2, 1 << 2); - axindxc_reg(0x21, 0xff, 0); - - /* 2.3.5:Enabling Non-Posted Memory Write for the K8 Platform */ - axindxc_reg(0x10, 1 << 9, 1 << 9); - /* END of sbPorAtStartOfTblCfg */ - - /* sbDevicesPorInitTables */ - /* set smbus iobase */ - pci_write_config32(dev, 0x10, SMBUS_IO_BASE | 1); - - /* enable smbus controller interface */ - byte = pci_read_config8(dev, 0xd2); - byte |= (1 << 0); - pci_write_config8(dev, 0xd2, byte); - - /* set smbus 1, ASF 2.0 (Alert Standard Format), iobase */ - pci_write_config16(dev, 0x58, SMBUS_IO_BASE | 0x11); - - /* TODO: I don't know the usage of followed two lines. I copied them from CIM. */ - pci_write_config8(dev, 0x0a, 0x1); - pci_write_config8(dev, 0x0b, 0x6); - - /* KB2RstEnable */ - pci_write_config8(dev, 0x40, 0xd4); - - /* Enable ISA Address 0-960K decoding */ - pci_write_config8(dev, 0x48, 0x0f); - - /* Enable ISA Address 0xC0000-0xDFFFF decode */ - pci_write_config8(dev, 0x49, 0xff); - - /* Enable decode cycles to IO C50, C51, C52 GPM controls. */ - byte = pci_read_config8(dev, 0x41); - byte &= 0x80; - byte |= 0x33; - pci_write_config8(dev, 0x41, byte); - - /* Legacy DMA Prefetch Enhancement, CIM masked it. */ - /* pci_write_config8(dev, 0x43, 0x1); */ - - /* Disabling Legacy USB Fast SMI# */ - byte = pci_read_config8(dev, 0x62); - byte |= 0x24; - pci_write_config8(dev, 0x62, byte); - - /* Features Enable */ - pci_write_config32(dev, 0x64, 0x829E7DBF); /* bit10: Enables the HPET interrupt. */ - - /* SerialIrq Control */ - pci_write_config8(dev, 0x69, 0x90); - - /* Test Mode, PCIB_SReset_En Mask is set. */ - pci_write_config8(dev, 0x6c, 0x20); - - /* IO Address Enable, CIM set 0x78 only and masked 0x79. */ - /*pci_write_config8(dev, 0x79, 0x4F); */ - pci_write_config8(dev, 0x78, 0xFF); - - /* This register is not used on sb600. It came from older chipset. */ - /*pci_write_config8(dev, 0x95, 0xFF); */ - - /* Set smbus iospace enable, I don't know why write 0x04 into reg5 that is reserved */ - pci_write_config16(dev, 0x4, 0x0407); - - /* clear any lingering errors, so the transaction will run */ - outb(inb(SMBUS_IO_BASE + SMBHSTSTAT), SMBUS_IO_BASE + SMBHSTSTAT); - - /* IDE Device, BDF:0-20-1 */ - printk(BIOS_INFO, "sb600_devices_por_init(): IDE Device, BDF:0-20-1\n"); - dev = pci_locate_device(PCI_ID(0x1002, 0x438C), 0); - /* Disable prefetch */ - byte = pci_read_config8(dev, 0x63); - byte |= 0x1; - pci_write_config8(dev, 0x63, byte); - - /* LPC Device, BDF:0-20-3 */ - printk(BIOS_INFO, "sb600_devices_por_init(): LPC Device, BDF:0-20-3\n"); - dev = pci_locate_device(PCI_ID(0x1002, 0x438D), 0); - /* DMA enable */ - pci_write_config8(dev, 0x40, 0x04); - /* LPC Sync Timeout */ - pci_write_config8(dev, 0x49, 0xFF); - - /* Enable Tpm12_en and Tpm_legacy. I don't know what is its usage and copied from CIM. */ - pci_write_config8(dev, 0x7C, 0x05); - - /* P2P Bridge, BDF:0-20-4, the configuration of the registers in this dev are copied from CIM, - * TODO: I don't know what are their mean? */ - printk(BIOS_INFO, "sb600_devices_por_init(): P2P Bridge, BDF:0-20-4\n"); - dev = pci_locate_device(PCI_ID(0x1002, 0x4384), 0); - /* I don't know why CIM tried to write into a read-only reg! */ - /*pci_write_config8(dev, 0x0c, 0x20); */ - - /* Arbiter enable. */ - pci_write_config8(dev, 0x43, 0xff); - - /* Set PCDMA request into height priority list. */ - /* pci_write_config8(dev, 0x49, 0x1); */ - - pci_write_config8(dev, 0x40, 0x26); - - /* I don't know why CIM set reg0x1c as 0x11. - * System will block at sdram_initialize() if I set it before call sdram_initialize(). - * If it is necessary to set reg0x1c as 0x11, please call this function after sdram_initialize(). - * pci_write_config8(dev, 0x1c, 0x11); - * pci_write_config8(dev, 0x1d, 0x11);*/ - - /*CIM set this register; but I didn't find its description in RPR. - On DBM690T platform, I didn't find different between set and skip this register. - But on Filbert platform, the DEBUG message from serial port on Peanut board can't be displayed - after the bit0 of this register is set. - pci_write_config8(dev, 0x04, 0x21); - */ - pci_write_config8(dev, 0x0d, 0x40); - pci_write_config8(dev, 0x1b, 0x40); - /* Enable PCIB_DUAL_EN_UP will fix potential problem with PCI cards. */ - pci_write_config8(dev, 0x50, 0x01); - - /* SATA Device, BDF:0-18-0, Non-Raid-5 SATA controller */ - printk(BIOS_INFO, "sb600_devices_por_init(): SATA Device, BDF:0-18-0\n"); - dev = pci_locate_device(PCI_ID(0x1002, 0x4380), 0); - - /*PHY Global Control, we are using A14. - * default: 0x2c40 for ASIC revision A12 and below - * 0x2c00 for ASIC revision A13 and above.*/ - pci_write_config16(dev, 0x86, 0x2C00); - - /* PHY Port0-3 Control */ - pci_write_config32(dev, 0x88, 0xB400DA); - pci_write_config32(dev, 0x8c, 0xB400DA); - pci_write_config32(dev, 0x90, 0xB400DA); - pci_write_config32(dev, 0x94, 0xB400DA); - - /* Port0-3 BIST Control/Status */ - pci_write_config8(dev, 0xa5, 0xB8); - pci_write_config8(dev, 0xad, 0xB8); - pci_write_config8(dev, 0xb5, 0xB8); - pci_write_config8(dev, 0xbd, 0xB8); -} - -/* sbPmioPorInitTable, Pre-initializing PMIO register space -* The power management (PM) block is resident in the PCI/LPC/ISA bridge. -* The PM regs are accessed via IO mapped regs 0xcd6 and 0xcd7. -* The index address is first programmed into IO reg 0xcd6. -* Read or write values are accessed through IO reg 0xcd7. -*/ -static void sb600_pmio_por_init(void) -{ - u8 byte; - - printk(BIOS_INFO, "sb600_pmio_por_init()\n"); - /* K8KbRstEn, KB_RST# control for K8 system. */ - byte = pmio_read(0x66); - byte |= 0x20; - pmio_write(0x66, byte); - - /* RPR2.3.4 S3/S4/S5 Function for the K8 Platform. */ - byte = pmio_read(0x52); - byte &= 0xc0; - byte |= 0x08; - pmio_write(0x52, byte); - - /* C state enable and SLP enable in C states. */ - byte = pmio_read(0x67); - byte |= 0x6; - pmio_write(0x67, byte); - - /* CIM sets 0x0e, but bit2 is for P4 system. */ - byte = pmio_read(0x68); - byte &= 0xf0; - byte |= 0x0c; - pmio_write(0x68, byte); - - /* Watch Dog Timer Control - * Set watchdog time base to 0xfec000f0 to avoid SCSI card boot failure. - * But I don't find WDT is enabled in SMBUS 0x41 bit3 in CIM. - */ - pmio_write(0x6c, 0xf0); - pmio_write(0x6d, 0x00); - pmio_write(0x6e, 0xc0); - pmio_write(0x6f, 0xfe); - - /* rpr2.14: Enables HPET periodical mode */ - byte = pmio_read(0x9a); - byte |= 1 << 7; - pmio_write(0x9a, byte); - byte = pmio_read(0x9f); - byte |= 1 << 5; - pmio_write(0x9f, byte); - byte = pmio_read(0x9e); - byte |= (1 << 6) | (1 << 7); - pmio_write(0x9e, byte); - - /* rpr2.14: Hides SM bus controller Bar1 where stores HPET MMIO base address */ - /* We have to clear this bit here, otherwise the kernel hangs. */ - byte = pmio_read(0x55); - byte |= 1 << 7; - byte |= 1 << 1; - pmio_write(0x55, byte); - - /* rpr2.14: Make HPET MMIO decoding controlled by the memory enable bit in command register of LPC ISA bridge */ - byte = pmio_read(0x52); - byte |= 1 << 6; - pmio_write(0x52, byte); - - /* rpr2.22: PLL Reset */ - byte = pmio_read(0x86); - byte |= 1 << 7; - pmio_write(0x86, byte); - - /* rpr2.3.3 */ - /* This provides 16us delay before the assertion of LDTSTP# when C3 is entered. - * The delay will allow USB DMA to go on in a continuous manner - */ - pmio_write(0x89, 0x10); - /* Set this bit to allow pop-up request being latched during the minimum LDTSTP# assertion time */ - byte = pmio_read(0x52); - byte |= 1 << 7; - pmio_write(0x52, byte); - - /* rpr2.15: ASF Remote Control Action */ - byte = pmio_read(0x9f); - byte |= 1 << 6; - pmio_write(0x9f, byte); - - /* rpr2.19: Enabling Spread Spectrum */ - byte = pmio_read(0x42); - byte |= 1 << 7; - pmio_write(0x42, byte); -} - -/* -* Compliant with CIM_48's sbPciCfg. -* Add any south bridge setting. -*/ -static void sb600_pci_cfg(void) -{ - pci_devfn_t dev; - u8 byte; - - /* SMBus Device, BDF:0-20-0 */ - dev = pci_locate_device(PCI_ID(0x1002, 0x4385), 0); - /* Enable the hidden revision ID, available after A13. */ - byte = pci_read_config8(dev, 0x70); - byte |= (1 << 8); - pci_write_config8(dev, 0x70, byte); - /* rpr2.20 Disable Timer IRQ Enhancement for proper operation of the 8254 timer, 0xae[5]. */ - byte = pci_read_config8(dev, 0xae); - byte |= (1 << 5); - pci_write_config8(dev, 0xae, byte); - - /* Enable watchdog decode timer */ - byte = pci_read_config8(dev, 0x41); - byte |= (1 << 3); - pci_write_config8(dev, 0x41, byte); - - /* Set to 1 to reset USB on the software (such as IO-64 or IO-CF9 cycles) - * generated PCIRST#. */ - byte = pmio_read(0x65); - byte |= (1 << 4); - pmio_write(0x65, byte); - /*For A13 and above. */ - if (get_sb600_revision() > 0x12) { - /* rpr2.16 C-State Reset, PMIO 0x9f[7]. */ - byte = pmio_read(0x9f); - byte |= (1 << 7); - pmio_write(0x9f, byte); - /* rpr2.17 PCI Clock Period will increase to 30.8ns. 0x53[7]. */ - byte = pmio_read(0x53); - byte |= (1 << 7); - pmio_write(0x53, byte); - } - - /* IDE Device, BDF:0-20-1 */ - dev = pci_locate_device(PCI_ID(0x1002, 0x438C), 0); - /* Enable IDE Explicit prefetch, 0x63[0] clear */ - byte = pci_read_config8(dev, 0x63); - byte &= 0xfe; - pci_write_config8(dev, 0x63, byte); - - /* LPC Device, BDF:0-20-3 */ - dev = pci_locate_device(PCI_ID(0x1002, 0x438D), 0); - /* rpr7.2 Enabling LPC DMA function. */ - byte = pci_read_config8(dev, 0x40); - byte |= (1 << 2); - pci_write_config8(dev, 0x40, byte); - /* rpr7.3 Disabling LPC TimeOut. 0x48[7] clear. */ - byte = pci_read_config8(dev, 0x48); - byte &= 0x7f; - pci_write_config8(dev, 0x48, byte); - /* rpr7.5 Disabling LPC MSI Capability, 0x78[1] clear. */ - byte = pci_read_config8(dev, 0x78); - byte &= 0xfd; - pci_write_config8(dev, 0x78, byte); - - /* SATA Device, BDF:0-18-0, Non-Raid-5 SATA controller */ - dev = pci_locate_device(PCI_ID(0x1002, 0x4380), 0); - /* rpr6.8 Disabling SATA MSI Capability, for A13 and above, 0x42[7]. */ - if (0x12 < get_sb600_revision()) { - u32 reg32; - reg32 = pci_read_config32(dev, 0x40); - reg32 |= (1 << 23); - pci_write_config32(dev, 0x40, reg32); - } - - /* EHCI Device, BDF:0-19-5, ehci usb controller */ - dev = pci_locate_device(PCI_ID(0x1002, 0x4386), 0); - /* rpr5.10 Disabling USB EHCI MSI Capability. 0x50[6]. */ - byte = pci_read_config8(dev, 0x50); - byte |= (1 << 6); - pci_write_config8(dev, 0x50, byte); - - /* OHCI0 Device, BDF:0-19-0, ohci usb controller #0 */ - dev = pci_locate_device(PCI_ID(0x1002, 0x4387), 0); - /* rpr5.11 Disabling USB OHCI MSI Capability. 0x40[12:8]=0x1f. */ - byte = pci_read_config8(dev, 0x41); - byte |= 0x1f; - pci_write_config8(dev, 0x41, byte); - -} - -/* -* Compliant with CIM_48's ATSBPowerOnResetInitJSP -*/ -static void sb600_por_init(void) -{ - /* sbDevicesPorInitTable + sbK8PorInitTable */ - sb600_devices_por_init(); - - /* sbPmioPorInitTable + sbK8PmioPorInitTable */ - sb600_pmio_por_init(); -} - -/* -* Compliant with CIM_48's AtiSbBeforePciInit -* It should be called during early POST after memory detection and BIOS shadowing but before PCI bus enumeration. -*/ -static void sb600_before_pci_init(void) -{ - sb600_pci_cfg(); -} - -/* -* This function should be called after enable_sb600_smbus(). -*/ -static void sb600_early_setup(void) -{ - printk(BIOS_INFO, "sb600_early_setup()\n"); - sb600_por_init(); -} - -static int smbus_read_byte(u32 device, u32 address) -{ - return do_smbus_read_byte(SMBUS_IO_BASE, device, address); -} diff --git a/src/southbridge/amd/sb600/enable_usbdebug.c b/src/southbridge/amd/sb600/enable_usbdebug.c deleted file mode 100644 index 5988add889..0000000000 --- a/src/southbridge/amd/sb600/enable_usbdebug.c +++ /dev/null @@ -1,34 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -// Use simple device model for this file even in ramstage -#define __SIMPLE_DEVICE__ - -#include -#include -#include -#include -#include "sb600.h" - -pci_devfn_t pci_ehci_dbg_dev(unsigned int hcd_idx) -{ - return PCI_DEV(0, 0x13, 5); /* USB EHCI, D19:F5 */ -} - -/* Required for successful build, but currently empty. */ -void pci_ehci_dbg_set_port(pci_devfn_t dev, unsigned int port) -{ - /* TODO: Allow changing the physical USB port used as Debug Port. */ -} diff --git a/src/southbridge/amd/sb600/hda.c b/src/southbridge/amd/sb600/hda.c deleted file mode 100644 index 367866f11f..0000000000 --- a/src/southbridge/amd/sb600/hda.c +++ /dev/null @@ -1,325 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include -#include -#include -#include -#include -#include -#include -#include "sb600.h" - -#define HDA_ICII_REG 0x68 -#define HDA_ICII_BUSY (1 << 0) -#define HDA_ICII_VALID (1 << 1) - -static int set_bits(void *port, u32 mask, u32 val) -{ - u32 dword; - int count; - - /* Write (val & ~mask) to port */ - val &= mask; - dword = read32(port); - dword &= ~mask; - dword |= val; - write32(port, dword); - - /* Wait for readback of register to - * match what was just written to it - */ - count = 50; - do { - /* Wait 1ms based on BKDG wait time */ - mdelay(1); - dword = read32(port); - dword &= mask; - } while ((dword != val) && --count); - - /* Timeout occurred */ - if (!count) - return -1; - return 0; -} - -static u32 codec_detect(void *base) -{ - u32 dword; - - /* Set Bit0 to 0 to enter reset state (BAR + 0x8)[0] */ - if (set_bits(base + 0x08, 1, 0) == -1) - goto no_codec; - - /* Set Bit 0 to 1 to exit reset state (BAR + 0x8)[0] */ - if (set_bits(base + 0x08, 1, 1) == -1) - goto no_codec; - - /* Delay for 1 ms since the BKDG does */ - mdelay(1); - - /* Read in Codec location (BAR + 0xe)[3..0]*/ - dword = read32(base + 0xe); - dword &= 0x0F; - if (!dword) - goto no_codec; - - return dword; - -no_codec: - /* Codec Not found */ - /* Put HDA back in reset (BAR + 0x8) [0] */ - set_bits(base + 0x08, 1, 0); - printk(BIOS_DEBUG, "No codec!\n"); - return 0; -} - -static u32 cim_verb_data[] = { - 0x01471c10, - 0x01471d40, - 0x01471e01, - 0x01471f01, -/* 1 */ - 0x01571c12, - 0x01571d10, - 0x01571e01, - 0x01571f01, -/* 2 */ - 0x01671c11, - 0x01671d60, - 0x01671e01, - 0x01671f01, -/* 3 */ - 0x01771c14, - 0x01771d20, - 0x01771e01, - 0x01771f01, -/* 4 */ - 0x01871c30, - 0x01871d90, - 0x01871ea1, - 0x01871f01, -/* 5 */ - 0x01971cf0, - 0x01971d11, - 0x01971e11, - 0x01971f41, -/* 6 */ - 0x01a71c80, - 0x01a71d30, - 0x01a71e81, - 0x01a71f01, -/* 7 */ - 0x01b71cf0, - 0x01b71d11, - 0x01b71e11, - 0x01b71f41, -/* 8 */ - 0x01c71cf0, - 0x01c71d11, - 0x01c71e11, - 0x01c71f41, -/* 9 */ - 0x01d71cf0, - 0x01d71d11, - 0x01d71e11, - 0x01d71f41, -/* 10 */ - 0x01e71c50, - 0x01e71d11, - 0x01e71e44, - 0x01e71f01, -/* 11 */ - 0x01f71c60, - 0x01f71d61, - 0x01f71ec4, - 0x01f71f01, -}; - -static u32 find_verb(u32 viddid, u32 ** verb) -{ - struct device *azalia_dev = dev_find_slot(0, PCI_DEVFN(0x14, 2)); - struct southbridge_amd_sb600_config *cfg = - (struct southbridge_amd_sb600_config *)azalia_dev->chip_info; - if (!cfg) - return 0; - printk(BIOS_DEBUG, "Dev=%s\n", dev_path(azalia_dev)); - printk(BIOS_DEBUG, "Default viddid=%x\n", cfg->hda_viddid); - printk(BIOS_DEBUG, "Reading viddid=%x\n", viddid); - if (viddid != cfg->hda_viddid) - return 0; - *verb = (u32 *) cim_verb_data; - return sizeof(cim_verb_data) / sizeof(u32); -} - -/** - * Wait 50usec for the codec to indicate it is ready - * no response would imply that the codec is non-operative - */ -static int wait_for_ready(void *base) -{ - /* Use a 50 usec timeout - the Linux kernel uses the - * same duration */ - - int timeout = 50; - - while (timeout--) { - u32 dword = read32(base + HDA_ICII_REG); - if (!(dword & HDA_ICII_BUSY)) - return 0; - udelay(1); - } - - return -1; -} - -/** - * Wait 50usec for the codec to indicate that it accepted - * the previous command. No response would imply that the code - * is non-operative - */ -static int wait_for_valid(void *base) -{ - /* Use a 50 usec timeout - the Linux kernel uses the - * same duration */ - - int timeout = 50; - while (timeout--) { - u32 dword = read32(base + HDA_ICII_REG); - if ((dword & (HDA_ICII_VALID | HDA_ICII_BUSY)) == - HDA_ICII_VALID) - return 0; - udelay(1); - } - - return -1; -} - -static void codec_init(void *base, int addr) -{ - u32 dword; - u32 *verb; - u32 verb_size; - int i; - - /* 1 */ - if (wait_for_ready(base) == -1) - return; - - dword = (addr << 28) | 0x000f0000; - write32(base + 0x60, dword); - - if (wait_for_valid(base) == -1) - return; - - dword = read32(base + 0x64); - - /* 2 */ - printk(BIOS_DEBUG, "codec viddid: %08x\n", dword); - verb_size = find_verb(dword, &verb); - - if (!verb_size) { - printk(BIOS_DEBUG, "No verb!\n"); - return; - } - - printk(BIOS_DEBUG, "verb_size: %d\n", verb_size); - /* 3 */ - for (i = 0; i < verb_size; i++) { - if (wait_for_ready(base) == -1) - return; - - write32(base + 0x60, verb[i]); - - if (wait_for_valid(base) == -1) - return; - } - printk(BIOS_DEBUG, "verb loaded!\n"); -} - -static void codecs_init(void *base, u32 codec_mask) -{ - int i; - for (i = 2; i >= 0; i--) { - if (codec_mask & (1 << i)) - codec_init(base, i); - } -} - -static void hda_init(struct device *dev) -{ - u8 byte; - u32 dword; - void *base; - struct resource *res; - u32 codec_mask; - struct device *sm_dev; - - /* Enable azalia - PM_io 0x59[4], disable ac97 - PM_io 0x59[1..0] */ - pm_iowrite(0x59, 0xB); - - /* Find the SMBus */ - sm_dev = dev_find_device(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SB600_SM, 0); - - /* Set routing pin - SMBus ExtFunc (0xf8/0xfc) */ - pci_write_config32(sm_dev, 0xf8, 0x00); - pci_write_config8(sm_dev, 0xfc, 0xAA); - /* Set INTA - SMBus 0x63 [2..0] */ - byte = pci_read_config8(sm_dev, 0x63); - byte &= ~0x7; - byte |= 0x0; /* INTA:0x0 - INTH:0x7 */ - pci_write_config8(sm_dev, 0x63, byte); - - /* Program the 2C to 0x437b1002 */ - dword = 0x437b1002; - pci_write_config32(dev, 0x2c, dword); - - /* Read in BAR */ - /* Is this right? HDA allows for a 64-bit BAR - * but this is only setup for a 32-bit one - */ - res = find_resource(dev, 0x10); - if (!res) - return; - - base = res2mmio(res, 0, 0); - printk(BIOS_DEBUG, "base = 0x%p\n", base); - codec_mask = codec_detect(base); - - if (codec_mask) { - printk(BIOS_DEBUG, "codec_mask = %02x\n", codec_mask); - codecs_init(base, codec_mask); - } -} - -static struct pci_operations lops_pci = { - .set_subsystem = pci_dev_set_subsystem, -}; - -static struct device_operations hda_audio_ops = { - .read_resources = pci_dev_read_resources, - .set_resources = pci_dev_set_resources, - .enable_resources = pci_dev_enable_resources, - /*.enable = sb600_enable, */ - .init = hda_init, - .scan_bus = 0, - .ops_pci = &lops_pci, -}; - -static const struct pci_driver hdaaudio_driver __pci_driver = { - .ops = &hda_audio_ops, - .vendor = PCI_VENDOR_ID_ATI, - .device = PCI_DEVICE_ID_ATI_SB600_HDA, -}; diff --git a/src/southbridge/amd/sb600/ide.c b/src/southbridge/amd/sb600/ide.c deleted file mode 100644 index cfd480d6ef..0000000000 --- a/src/southbridge/amd/sb600/ide.c +++ /dev/null @@ -1,63 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include -#include -#include -#include -#include -#include "sb600.h" - -static void ide_init(struct device *dev) -{ - /* Enable ide devices so the linux ide driver will work */ - u32 dword; - u8 byte; - - /* RPR10.1 disable MSI */ - dword = pci_read_config32(dev, 0x70); - dword &= ~(1 << 16); - pci_write_config32(dev, 0x70, dword); - - /* Enable UDMA on all devices, it will become UDMA0 (default PIO is PIO0) */ - byte = pci_read_config8(dev, 0x54); - byte |= 0xf; - pci_write_config8(dev, 0x54, byte); - - /* Enable I/O Access&& Bus Master */ - dword = pci_read_config16(dev, 0x4); - dword |= 1 << 2; - pci_write_config16(dev, 0x4, dword); -} - -static struct pci_operations lops_pci = { - .set_subsystem = pci_dev_set_subsystem, -}; - -static struct device_operations ide_ops = { - .read_resources = pci_dev_read_resources, - .set_resources = pci_dev_set_resources, - .enable_resources = pci_dev_enable_resources, - .init = ide_init, - .scan_bus = 0, - /* .enable = sb600_enable, */ - .ops_pci = &lops_pci, -}; - -static const struct pci_driver ide_driver __pci_driver = { - .ops = &ide_ops, - .vendor = PCI_VENDOR_ID_ATI, - .device = PCI_DEVICE_ID_ATI_SB600_IDE, -}; diff --git a/src/southbridge/amd/sb600/lpc.c b/src/southbridge/amd/sb600/lpc.c deleted file mode 100644 index 70699d092c..0000000000 --- a/src/southbridge/amd/sb600/lpc.c +++ /dev/null @@ -1,254 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "sb600.h" - -static void lpc_init(struct device *dev) -{ - u8 byte; - u32 dword; - struct device *sm_dev; - - /* Enable the LPC Controller */ - sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); - dword = pci_read_config32(sm_dev, 0x64); - dword |= 1 << 20; - pci_write_config32(sm_dev, 0x64, dword); - - /* Initialize isa dma */ - isa_dma_init(); - - /* RPR 7.2 Enable DMA transaction on the LPC bus */ - byte = pci_read_config8(dev, 0x40); - byte |= (1 << 2); - pci_write_config8(dev, 0x40, byte); - - /* RPR 7.3 Disable the timeout mechanism on LPC */ - byte = pci_read_config8(dev, 0x48); - byte &= ~(1 << 7); - pci_write_config8(dev, 0x48, byte); - - /* RPR 7.5 Disable LPC MSI Capability */ - byte = pci_read_config8(dev, 0x78); - byte &= ~(1 << 1); - pci_write_config8(dev, 0x78, byte); - - cmos_check_update_date(); - - setup_i8259(); /* Initialize i8259 pic */ - setup_i8254(); /* Initialize i8254 timers */ -} - -static void sb600_lpc_read_resources(struct device *dev) -{ - struct resource *res; - - /* Get the normal pci resources of this device */ - pci_dev_read_resources(dev); /* We got one for APIC, or one more for TRAP */ - - pci_get_resource(dev, 0xA0); /* SPI ROM base address */ - - /* Add an extra subtractive resource for both memory and I/O. */ - res = new_resource(dev, IOINDEX_SUBTRACTIVE(0, 0)); - res->base = 0; - res->size = 0x1000; - res->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE | - IORESOURCE_ASSIGNED | IORESOURCE_FIXED; - - res = new_resource(dev, IOINDEX_SUBTRACTIVE(1, 0)); - res->base = 0xff800000; - res->size = 0x00800000; /* 8 MB for flash */ - res->flags = IORESOURCE_MEM | IORESOURCE_SUBTRACTIVE | - IORESOURCE_ASSIGNED | IORESOURCE_FIXED; - - res = new_resource(dev, 3); /* IOAPIC */ - res->base = IO_APIC_ADDR; - res->size = 0x00001000; - res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED | IORESOURCE_FIXED; - - compact_resources(dev); -} - -/** - * @brief Enable resources for children devices - * - * @param dev the device whose children's resources are to be enabled - * - */ -static void sb600_lpc_enable_childrens_resources(struct device *dev) -{ - struct bus *link; - u32 reg, reg_x; - int var_num = 0; - u16 reg_var[3] = {0x0, 0x0, 0x0}; - u8 wiosize = pci_read_config8(dev, 0x74); - - reg = pci_read_config32(dev, 0x44); - reg_x = pci_read_config32(dev, 0x48); - - for (link = dev->link_list; link; link = link->next) { - struct device *child; - for (child = link->children; child; - child = child->sibling) { - if (child->enabled - && (child->path.type == DEVICE_PATH_PNP)) { - struct resource *res; - for (res = child->resource_list; res; res = res->next) { - u32 base, end; /* don't need long long */ - if (!(res->flags & IORESOURCE_IO)) - continue; - base = res->base; - end = resource_end(res); - printk(BIOS_DEBUG, "sb600 lpc decode:%s, base=0x%08x, end=0x%08x\n", - dev_path(child), base, end); - switch (base) { - case 0x60: /* KB */ - case 0x64: /* MS */ - reg |= (1 << 29); - break; - case 0x3f8: /* COM1 */ - reg |= (1 << 6); - break; - case 0x2f8: /* COM2 */ - reg |= (1 << 7); - break; - case 0x378: /* Parallel 1 */ - reg |= (1 << 0); - reg |= (1 << 1); /* + 0x778 for ECP */ - break; - case 0x3f0: /* FD0 */ - reg |= (1 << 26); - break; - case 0x220: /* Audio 0 */ - reg |= (1 << 8); - break; - case 0x300: /* Midi 0 */ - reg |= (1 << 18); - break; - case 0x400: - reg_x |= (1 << 16); - break; - case 0x480: - reg_x |= (1 << 17); - break; - case 0x500: - reg_x |= (1 << 18); - break; - case 0x580: - reg_x |= (1 << 19); - break; - case 0x4700: - reg_x |= (1 << 22); - break; - case 0xfd60: - reg_x |= (1 << 23); - break; - default: - if (var_num >= 3) - continue; /* only 3 var ; compact them ? */ - switch (var_num) { - case 0: - reg_x |= (1 << 2); - if ((end - base) < 16) - wiosize |= (1 << 0); - break; - case 1: - reg_x |= (1 << 24); - if ((end - base) < 16) - wiosize |= (1 << 2); - break; - case 2: - reg_x |= (1 << 25); - reg_x |= (1 << 24); - if ((end - base) < 16) - wiosize |= (1 << 3); - break; - } - reg_var[var_num++] = - base & 0xffff; - } - } - } - } - } - pci_write_config32(dev, 0x44, reg); - pci_write_config32(dev, 0x48, reg_x); - /* Set WideIO for as many IOs found (fall through is on purpose) */ - switch (var_num) { - case 2: - pci_write_config16(dev, 0x90, reg_var[2]); - case 1: - pci_write_config16(dev, 0x66, reg_var[1]); - case 0: - pci_write_config16(dev, 0x64, reg_var[0]); - break; - } - pci_write_config8(dev, 0x74, wiosize); -} - -static void sb600_lpc_enable_resources(struct device *dev) -{ - pci_dev_enable_resources(dev); - sb600_lpc_enable_childrens_resources(dev); -} - -#if IS_ENABLED(CONFIG_HAVE_ACPI_TABLES) - -extern u16 pm_base; - -static void southbridge_acpi_fill_ssdt_generator(struct device *device) { - amd_generate_powernow(pm_base + 8, 6, 1); -} - -#endif - -static struct pci_operations lops_pci = { - .set_subsystem = pci_dev_set_subsystem, -}; - -static struct device_operations lpc_ops = { - .read_resources = sb600_lpc_read_resources, - .set_resources = pci_dev_set_resources, - .enable_resources = sb600_lpc_enable_resources, -#if IS_ENABLED(CONFIG_HAVE_ACPI_TABLES) - .write_acpi_tables = acpi_write_hpet, - .acpi_fill_ssdt_generator = southbridge_acpi_fill_ssdt_generator, -#endif - .init = lpc_init, - .scan_bus = scan_lpc_bus, - /* .enable = sb600_enable, */ - .ops_pci = &lops_pci, -}; -static const struct pci_driver lpc_driver __pci_driver = { - .ops = &lpc_ops, - .vendor = PCI_VENDOR_ID_ATI, - .device = PCI_DEVICE_ID_ATI_SB600_LPC, -}; diff --git a/src/southbridge/amd/sb600/pci.c b/src/southbridge/amd/sb600/pci.c deleted file mode 100644 index 1db30356cd..0000000000 --- a/src/southbridge/amd/sb600/pci.c +++ /dev/null @@ -1,138 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include -#include -#include -#include -#include -#include "sb600.h" - -static void pci_init(struct device *dev) -{ - u32 dword; - u16 word; - u8 byte; - - /* RPR 4.1 Enables the PCI-bridge subtractive decode */ - /* This setting is strongly recommended since it supports some legacy PCI add-on cards,such as BIOS debug cards */ - byte = pci_read_config8(dev, 0x4B); - byte |= 1 << 7; - pci_write_config8(dev, 0x4B, byte); - byte = pci_read_config8(dev, 0x40); - byte |= 1 << 5; - pci_write_config8(dev, 0x40, byte); - - /* RPR4.2 PCI-bridge upstream dual address window */ - /* this setting is applicable if the system memory is more than 4GB,and the PCI device can support dual address access */ - byte = pci_read_config8(dev, 0x50); - byte |= 1 << 0; - pci_write_config8(dev, 0x50, byte); - - /* RPR 4.3 PCI bus 64-byte DMA read access */ - /* Enhance the PCI bus DMA performance */ - byte = pci_read_config8(dev, 0x4B); - byte |= 1 << 4; - pci_write_config8(dev, 0x4B, byte); - - /* RPR 4.4 Enables the PCIB writes to be cacheline aligned. */ - /* The size of the writes will be set in the Cacheline Register */ - byte = pci_read_config8(dev, 0x40); - byte |= 1 << 1; - pci_write_config8(dev, 0x40, byte); - - /* RPR 4.5 Enables the PCIB to retain ownership of the bus on the Primary side and on the Secondary side when GNT# is deasserted */ - pci_write_config8(dev, 0x0D, 0x40); - pci_write_config8(dev, 0x1B, 0x40); - - /* RPR 4.6 Enable the command matching checking function on "Memory Read" & "Memory Read Line" commands */ - byte = pci_read_config8(dev, 0x4B); - byte |= 1 << 6; - pci_write_config8(dev, 0x4B, byte); - - /* RPR 4.7 When enabled, the PCI arbiter checks for the Bus Idle before asserting GNT# */ - byte = pci_read_config8(dev, 0x4B); - byte |= 1 << 0; - pci_write_config8(dev, 0x4B, byte); - - /* RPR 4.8 Adjusts the GNT# de-assertion time */ - word = pci_read_config16(dev, 0x64); - word |= 1 << 12; - pci_write_config16(dev, 0x64, word); - - /* RPR 4.9 Fast Back to Back transactions support */ - byte = pci_read_config8(dev, 0x48); - byte |= 1 << 2; - pci_write_config8(dev, 0x48, byte); - - /* RPR 4.10 Enable Lock Operation */ - byte = pci_read_config8(dev, 0x48); - byte |= 1 << 3; - pci_write_config8(dev, 0x48, byte); - byte = pci_read_config8(dev, 0x40); - byte |= (1 << 2); - pci_write_config8(dev, 0x40, byte); - - /* RPR 4.11 Enable additional optional PCI clock */ - word = pci_read_config16(dev, 0x64); - word |= 1 << 8; - pci_write_config16(dev, 0x64, word); - - /* rpr4.12 Disable Fewer-Retry Mode for A11-A13 only. 0x64[5:4] clear */ - byte = pci_read_config8(dev, 0x64); - byte &= 0xcf; - pci_write_config8(dev, 0x64, byte); - - /* rpr4.14 Disabling Downstream Flush, for A12 only, 0x64[18]. */ - dword = pci_read_config32(dev, 0x64); - dword |= (1 << 18); - pci_write_config32(dev, 0x64, dword); - - /* RPR 4.13 Enable One-Prefetch-Channel Mode */ - dword = pci_read_config32(dev, 0x64); - dword |= 1 << 20; - pci_write_config32(dev, 0x64, dword); - - /* RPR 4.15 Disable PCIB MSI Capability */ - byte = pci_read_config8(dev, 0x40); - byte &= ~(1 << 3); - pci_write_config8(dev, 0x40, byte); - - /* rpr4.16 Adjusting CLKRUN# */ - dword = pci_read_config32(dev, 0x64); - dword |= (1 << 15); - pci_write_config32(dev, 0x64, dword); -} - -static struct pci_operations lops_pci = { - .set_subsystem = 0, -}; - -static struct device_operations pci_ops = { - .read_resources = pci_bus_read_resources, - .set_resources = pci_dev_set_resources, - .enable_resources = pci_bus_enable_resources, - .init = pci_init, - .scan_bus = pci_scan_bridge, - /* .enable = sb600_enable, */ - .reset_bus = pci_bus_reset, - .ops_pci = &lops_pci, -}; - -static const struct pci_driver pci_driver __pci_driver = { - .ops = &pci_ops, - .vendor = PCI_VENDOR_ID_ATI, - .device = PCI_DEVICE_ID_ATI_SB600_PCI, -}; diff --git a/src/southbridge/amd/sb600/reset.c b/src/southbridge/amd/sb600/reset.c deleted file mode 100644 index 04bf3f4e83..0000000000 --- a/src/southbridge/amd/sb600/reset.c +++ /dev/null @@ -1,31 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -// Use simple device model for this file even in ramstage -#define __SIMPLE_DEVICE__ - -#include -#include - -#include - -void do_hard_reset(void) -{ - set_bios_reset(); - /* Try rebooting through port 0xcf9 */ - /* Actually it is not a real hard_reset --- it only reset coherent link table, but not reset link freq and width */ - outb((0 << 3) | (0 << 2) | (1 << 1), 0xcf9); - outb((0 << 3) | (1 << 2) | (1 << 1), 0xcf9); -} diff --git a/src/southbridge/amd/sb600/sata.c b/src/southbridge/amd/sb600/sata.c deleted file mode 100644 index 650bb3969a..0000000000 --- a/src/southbridge/amd/sb600/sata.c +++ /dev/null @@ -1,271 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * Copyright (C) 2008 Carl-Daniel Hailfinger - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include -#include -#include -#include -#include -#include -#include -#include "sb600.h" -#include - -#define SATA_MODE_IDE 1 -#define SATA_MODE_AHCI 0 - -static int sata_drive_detect(int portnum, u16 iobar) -{ - u8 byte, byte2; - int i = 0; - outb(0xA0 + 0x10 * (portnum % 2), iobar + 0x6); - while (byte = inb(iobar + 0x6), byte2 = inb(iobar + 0x7), - (byte != (0xA0 + 0x10 * (portnum % 2))) || - ((byte2 & 0x88) != 0)) { - printk(BIOS_SPEW, "0x6=%x, 0x7=%x\n", byte, byte2); - if (byte != (0xA0 + 0x10 * (portnum % 2))) { - /* This will happen at the first iteration of this loop - * if the first SATA port is unpopulated and the - * second SATA port is populated. - */ - printk(BIOS_DEBUG, "drive no longer selected after %i ms, " - "retrying init\n", i * 10); - return 1; - } else - printk(BIOS_SPEW, "drive detection not yet completed, " - "waiting...\n"); - mdelay(10); - i++; - } - printk(BIOS_SPEW, "drive detection done after %i ms\n", i * 10); - return 0; -} - -static void sata_init(struct device *dev) -{ - u8 byte; - u16 word; - u32 dword; - void *sata_bar5; - u16 sata_bar0, sata_bar1, sata_bar2, sata_bar3, sata_bar4; - int i, j; - - struct southbridge_ati_sb600_config *conf; - conf = dev->chip_info; - - struct device *sm_dev; - /* SATA SMBus Disable */ - /* sm_dev = pci_locate_device(PCI_ID(0x1002, 0x4385), 0); */ - sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); - /* Disable SATA SMBUS */ - byte = pci_read_config8(sm_dev, 0xad); - byte |= (1 << 1); - /* Enable SATA and power saving */ - byte = pci_read_config8(sm_dev, 0xad); - byte |= (1 << 0); - byte |= (1 << 5); - pci_write_config8(sm_dev, 0xad, byte); - /* Set the interrupt Mapping to INTG# */ - byte = pci_read_config8(sm_dev, 0xaf); - byte = 0x6 << 2; - pci_write_config8(sm_dev, 0xaf, byte); - - /* get base address */ - sata_bar5 = (void *)(pci_read_config32(dev, 0x24) & ~0x3FF); - sata_bar0 = pci_read_config16(dev, 0x10) & ~0x7; - sata_bar1 = pci_read_config16(dev, 0x14) & ~0x3; - sata_bar2 = pci_read_config16(dev, 0x18) & ~0x7; - sata_bar3 = pci_read_config16(dev, 0x1C) & ~0x3; - sata_bar4 = pci_read_config16(dev, 0x20) & ~0xf; - - printk(BIOS_SPEW, "sata_bar0=%x\n", sata_bar0); /* 3030 */ - printk(BIOS_SPEW, "sata_bar1=%x\n", sata_bar1); /* 3070 */ - printk(BIOS_SPEW, "sata_bar2=%x\n", sata_bar2); /* 3040 */ - printk(BIOS_SPEW, "sata_bar3=%x\n", sata_bar3); /* 3080 */ - printk(BIOS_SPEW, "sata_bar4=%x\n", sata_bar4); /* 3000 */ - printk(BIOS_SPEW, "sata_bar5=%p\n", sata_bar5); /* e0309000 */ - - /* SERR-Enable */ - word = pci_read_config16(dev, 0x04); - word |= (1 << 8); - pci_write_config16(dev, 0x04, word); - - /* Dynamic power saving */ - byte = pci_read_config8(dev, 0x40); - byte |= (1 << 2); - pci_write_config8(dev, 0x40, byte); - - /* Set SATA Operation Mode */ - byte = pci_read_config8(dev, 0x40); - byte |= (1 << 0); - byte |= (1 << 4); - pci_write_config8(dev, 0x40, byte); - - // 1 means IDE, 0 means AHCI - i = CONFIG_SATA_MODE; - get_option(&i, "sata_mode"); - printk(BIOS_INFO, "%s: setting sata mode = %s\n", __func__, (i == SATA_MODE_IDE)?"ide":"ahci" ); - - dword = pci_read_config32(dev, 0x8); - dword &= 0xff0000ff; - if (i == SATA_MODE_IDE) - dword |= 0x00018f00; // IDE mode - else - dword |= 0x00060100; // AHCI mode - pci_write_config32(dev, 0x8, dword); - - byte = pci_read_config8(dev, 0x40); - byte &= ~(1 << 0); - pci_write_config8(dev, 0x40, byte); - - /* Enable the SATA watchdog counter */ - byte = pci_read_config8(dev, 0x44); - byte |= (1 << 0); - pci_write_config8(dev, 0x44, byte); - - /* Program the watchdog counter to 0x10 */ - byte = 0x10; - pci_write_config8(dev, 0x46, byte); - - /* RPR6.5 Program the PHY Global Control to 0x2C00 for A13 */ - word = 0x2c00; - pci_write_config16(dev, 0x86, word); - - /* RPR6.5 Program the Phy Tuning4Ports */ - dword = 0x00B401D6; - pci_write_config32(dev, 0x88, dword); - pci_write_config32(dev, 0x8c, dword); - pci_write_config32(dev, 0x90, dword); - pci_write_config32(dev, 0x94, dword); - - byte = 0xB8; - pci_write_config8(dev, 0xA5, byte); - pci_write_config8(dev, 0xAD, byte); - pci_write_config8(dev, 0xB5, byte); - pci_write_config8(dev, 0xBD, byte); - - /* RPR 6.8 */ - word = pci_read_config16(dev, 0x42); - word |= 1 << 7; - pci_write_config16(dev, 0x42, word); - /* RPR 6.9 */ - dword = pci_read_config32(dev, 0x40); - dword |= 1 << 25; - pci_write_config32(dev, 0x40, dword); - - /* Enable the I/O, MM, BusMaster access for SATA */ - byte = pci_read_config8(dev, 0x4); - byte |= 7 << 0; - pci_write_config8(dev, 0x4, byte); - - /* RPR6.6 SATA drive detection. */ - /* Use BAR5+0x128,BAR0 for Primary Slave */ - /* Use BAR5+0x1A8,BAR0 for Primary Slave */ - /* Use BAR5+0x228,BAR2 for Secondary Master */ - /* Use BAR5+0x2A8,BAR2 for Secondary Slave */ - - for (i = 0; i < 4; i++) { - byte = read8(sata_bar5 + 0x128 + 0x80 * i); - printk(BIOS_SPEW, "SATA port %i status = %x\n", i, byte); - byte &= 0xF; - - if ( byte == 0x1 ) { - /* If the drive status is 0x1 then we see it but we aren't talking to it. */ - /* Try to do something about it. */ - printk(BIOS_SPEW, "SATA device detected but not talking. Trying lower speed.\n"); - - /* Read in Port-N Serial ATA Control Register */ - byte = read8(sata_bar5 + 0x12C + 0x80 * i); - - /* Set Reset Bit and 1.5g bit */ - byte |= 0x11; - write8((sata_bar5 + 0x12C + 0x80 * i), byte); - - /* Wait 1ms */ - mdelay(1); - - /* Clear Reset Bit */ - byte &= ~0x01; - write8((sata_bar5 + 0x12C + 0x80 * i), byte); - - /* Wait 1ms */ - mdelay(1); - - /* Reread status */ - byte = read8(sata_bar5 + 0x128 + 0x80 * i); - printk(BIOS_SPEW, "SATA port %i status = %x\n", i, byte); - byte &= 0xF; - } - - if (byte == 0x3) { - for (j = 0; j < 10; j++) { - if (!sata_drive_detect(i, ((i / 2) == 0) ? sata_bar0 : sata_bar2)) - break; - } - printk(BIOS_DEBUG, "%s %s device is %sready after %i tries\n", - (i / 2) ? "Secondary" : "Primary", - (i % 2 ) ? "Slave" : "Master", - (j == 10) ? "not " : "", - (j == 10) ? j : j + 1); - } else { - printk(BIOS_DEBUG, "No %s %s SATA drive on Slot%i\n", - (i / 2) ? "Secondary" : "Primary", - (i % 2 ) ? "Slave" : "Master", i); - } - } - - /* Below is CIM InitSataLateFar */ - /* Enable interrupts from the HBA */ - byte = read8(sata_bar5 + 0x4); - byte |= 1 << 1; - write8((sata_bar5 + 0x4), byte); - - /* Clear error status */ - write32((sata_bar5 + 0x130), 0xFFFFFFFF); - write32((sata_bar5 + 0x1b0), 0xFFFFFFFF); - write32((sata_bar5 + 0x230), 0xFFFFFFFF); - write32((sata_bar5 + 0x2b0), 0xFFFFFFFF); - - /* Clear SATA status,Firstly we get the AcpiGpe0BlkAddr */ - /* ????? why CIM does not set the AcpiGpe0BlkAddr , but use it??? */ - - /* word = 0x0000; */ - /* word = pm_ioread(0x28); */ - /* byte = pm_ioread(0x29); */ - /* word |= byte<<8; */ - /* printk(BIOS_DEBUG, "AcpiGpe0Blk addr = %x\n", word); */ - /* write32(word, 0x80000000); */ -} - -static struct pci_operations lops_pci = { - .set_subsystem = pci_dev_set_subsystem, -}; - -static struct device_operations sata_ops = { - .read_resources = pci_dev_read_resources, - .set_resources = pci_dev_set_resources, - .enable_resources = pci_dev_enable_resources, - /* .enable = sb600_enable, */ - .init = sata_init, - .scan_bus = 0, - .ops_pci = &lops_pci, -}; - -static const struct pci_driver sata0_driver __pci_driver = { - .ops = &sata_ops, - .vendor = PCI_VENDOR_ID_ATI, - .device = PCI_DEVICE_ID_ATI_SB600_SATA, -}; diff --git a/src/southbridge/amd/sb600/sb600.c b/src/southbridge/amd/sb600/sb600.c deleted file mode 100644 index 9acd2cf77e..0000000000 --- a/src/southbridge/amd/sb600/sb600.c +++ /dev/null @@ -1,227 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include - -#include - -#include -#include -#include -#include -#include "sb600.h" - -static struct device *find_sm_dev(struct device *dev, u32 devfn) -{ - struct device *sm_dev; - - sm_dev = dev_find_slot(dev->bus->secondary, devfn); - if (!sm_dev) - return sm_dev; - - if ((sm_dev->vendor != PCI_VENDOR_ID_ATI) || - ((sm_dev->device != PCI_DEVICE_ID_ATI_SB600_SM))) { - u32 id; - id = pci_read_config32(sm_dev, PCI_VENDOR_ID); - if ((id != - (PCI_VENDOR_ID_ATI | (PCI_DEVICE_ID_ATI_SB600_SM << 16)))) - { - sm_dev = 0; - } - } - - return sm_dev; -} - -void set_sm_enable_bits(struct device *sm_dev, u32 reg_pos, u32 mask, u32 val) -{ - u32 reg_old, reg; - reg = reg_old = pci_read_config32(sm_dev, reg_pos); - reg &= ~mask; - reg |= val; - if (reg != reg_old) { - pci_write_config32(sm_dev, reg_pos, reg); - } -} - -static void pmio_write_index(u16 port_base, u8 reg, u8 value) -{ - outb(reg, port_base); - outb(value, port_base + 1); -} - -static u8 pmio_read_index(u16 port_base, u8 reg) -{ - outb(reg, port_base); - return inb(port_base + 1); -} - -void pm_iowrite(u8 reg, u8 value) -{ - pmio_write_index(PM_INDEX, reg, value); -} - -u8 pm_ioread(u8 reg) -{ - return pmio_read_index(PM_INDEX, reg); -} - -void pm2_iowrite(u8 reg, u8 value) -{ - pmio_write_index(PM2_INDEX, reg, value); -} - -u8 pm2_ioread(u8 reg) -{ - return pmio_read_index(PM2_INDEX, reg); -} - -static void set_pmio_enable_bits(struct device *sm_dev, u32 reg_pos, u32 mask, - u32 val) -{ - u8 reg_old, reg; - reg = reg_old = pm_ioread(reg_pos); - reg &= ~mask; - reg |= val; - if (reg != reg_old) { - pm_iowrite(reg_pos, reg); - } -} - -void sb600_enable(struct device *dev) -{ - struct device *sm_dev = NULL; - struct device *bus_dev = NULL; - int index = -1; - u32 deviceid; - u32 vendorid; - - /* struct southbridge_ati_sb600_config *conf; */ - /* conf = dev->chip_info; */ - int i; - - u32 devfn; - - printk(BIOS_DEBUG, "sb600_enable()\n"); - - /* - * 0:12.0 SATA bit 8 of sm_dev 0xac : 1 - enable, default + 32 * 3 - * 0:13.1 USB-1 bit 2 of sm_dev 0x68 - * 0:13.2 USB-2 bit 3 of sm_dev 0x68 - * 0:13.3 USB-3 bit 4 of sm_dev 0x68 - * 0:13.4 USB-4 bit 5 of sm_dev 0x68 - * 0:13.5 USB2 bit 0 of sm_dev 0x68 : 1 - enable, default - * 0:14.0 SMBUS 0 - * 0:14.1 IDE 1 - * 0:14.2 HDA bit 3 of pm_io 0x59 : 1 - enable, default + 32 * 4 - * 0:14.3 LPC bit 20 of sm_dev 0x64 : 0 - disable, default + 32 * 1 - * 0:14.4 PCI 4 - * 0:14.5 ACI bit 0 of pm_io 0x59 : 0 - enable, default - * 0:14.6 MCI bit 1 of pm_io 0x59 : 0 - enable, default - */ - if (dev->device == 0x0000) { - vendorid = pci_read_config32(dev, PCI_VENDOR_ID); - deviceid = (vendorid >> 16) & 0xffff; - vendorid &= 0xffff; - } else { - vendorid = dev->vendor; - deviceid = dev->device; - } - bus_dev = dev->bus->dev; - if ((bus_dev->vendor == PCI_VENDOR_ID_ATI) && - (bus_dev->device == PCI_DEVICE_ID_ATI_SB600_PCI)) { - devfn = (bus_dev->path.pci.devfn) & ~7; - sm_dev = find_sm_dev(bus_dev, devfn); - if (!sm_dev) - return; - - /* something under 00:01.0 */ - switch (dev->path.pci.devfn) { - case 5 << 3: - ; - } - - return; - } - - i = (dev->path.pci.devfn) & ~7; - i += (2 << 3); - for (devfn = (0x14 << 3); devfn <= i; devfn += (1 << 3)) { - sm_dev = find_sm_dev(dev, devfn); - if (sm_dev) - break; - } - if (!sm_dev) - return; - - switch (dev->path.pci.devfn - (devfn - (0x14 << 3))) { - case (0x12 << 3) | 0: - index = 8; - set_sm_enable_bits(sm_dev, 0xac, 1 << index, - (dev->enabled ? 1 : 0) << index); - index += 32 * 3; - break; - case (0x13 << 3) | 0: - case (0x13 << 3) | 1: - case (0x13 << 3) | 2: - case (0x13 << 3) | 3: - case (0x13 << 3) | 4: - case (0x13 << 3) | 5: - index = dev->path.pci.devfn & 7; - index++; - index %= 6; - set_sm_enable_bits(sm_dev, 0x68, 1 << index, - (dev->enabled ? 1 : 0) << index); - index += 32 * 2; - break; - case (0x14 << 3) | 0: - index = 0; - break; - case (0x14 << 3) | 1: - index = 1; - break; - case (0x14 << 3) | 2: - index = 3; - set_pmio_enable_bits(sm_dev, 0x59, 1 << index, - (dev->enabled ? 1 : 0) << index); - index += 32 * 4; - break; - case (0x14 << 3) | 3: - index = 20; - set_sm_enable_bits(sm_dev, 0x64, 1 << index, - (dev->enabled ? 1 : 0) << index); - index += 32 * 1; - break; - case (0x14 << 3) | 4: - index = 4; - break; - case (0x14 << 3) | 5: - case (0x14 << 3) | 6: - index = dev->path.pci.devfn & 7; - index -= 5; - set_pmio_enable_bits(sm_dev, 0x59, 1 << index, - (dev->enabled ? 0 : 1) << index); - index += 32 * 4; - break; - default: - printk(BIOS_DEBUG, "unknown dev: %s deviceid=%4x\n", dev_path(dev), - deviceid); - } -} - -struct chip_operations southbridge_amd_sb600_ops = { - CHIP_NAME("ATI SB600") - .enable_dev = sb600_enable, -}; diff --git a/src/southbridge/amd/sb600/sb600.h b/src/southbridge/amd/sb600/sb600.h deleted file mode 100644 index d955a70f4e..0000000000 --- a/src/southbridge/amd/sb600/sb600.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef SB600_H -#define SB600_H - -#ifndef __ACPI__ -#include -#include "chip.h" -#endif - -/* Power management index/data registers */ -#define PM_INDEX 0xcd6 -#define PM_DATA 0xcd7 -#define PM2_INDEX 0xcd0 -#define PM2_DATA 0xcd1 - -#define HPET_BASE_ADDRESS 0xfed00000 - -#ifndef __ACPI__ -extern void pm_iowrite(u8 reg, u8 value); -extern u8 pm_ioread(u8 reg); -extern void pm2_iowrite(u8 reg, u8 value); -extern u8 pm2_ioread(u8 reg); - -#ifndef __SIMPLE_DEVICE__ -extern void set_sm_enable_bits(struct device *sm_dev, u32 reg_pos, u32 mask, - u32 val); -void sb600_enable(struct device *dev); -#endif - -void sb600_lpc_port80(void); -void sb600_pci_port80(void); - -#endif /* __ACPI__ */ -#endif /* SB600_H */ diff --git a/src/southbridge/amd/sb600/sm.c b/src/southbridge/amd/sb600/sm.c deleted file mode 100644 index 371ffcd6a2..0000000000 --- a/src/southbridge/amd/sb600/sm.c +++ /dev/null @@ -1,370 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "sb600.h" -#include "smbus.c" - -#define NMI_OFF 0 - -#define MAINBOARD_POWER_OFF 0 -#define MAINBOARD_POWER_ON 1 - -#ifndef CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL -#define CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL MAINBOARD_POWER_ON -#endif - -/* -* SB600 enables all USB controllers by default in SMBUS Control. -* SB600 enables SATA by default in SMBUS Control. -*/ -static void sm_init(struct device *dev) -{ - u8 byte; - u8 byte_old; - u32 dword; - u32 ioapic_base; - u32 on; - u32 nmi_option; - - printk(BIOS_INFO, "sm_init().\n"); - - ioapic_base = pci_read_config32(dev, 0x74) & (0xffffffe0); /* some like mem resource, but does not have enable bit */ - /* Don't rename APIC ID */ - clear_ioapic((void *)ioapic_base); - - dword = pci_read_config8(dev, 0x62); - dword |= 1 << 2; - pci_write_config8(dev, 0x62, dword); - - dword = pci_read_config32(dev, 0x78); - dword |= 1 << 9; - pci_write_config32(dev, 0x78, dword); /* enable 0xCD6 0xCD7 */ - - /* bit 10: MultiMediaTimerIrqEn */ - dword = pci_read_config8(dev, 0x64); - dword |= 1 << 10; - pci_write_config8(dev, 0x64, dword); - /* enable serial irq */ - byte = pci_read_config8(dev, 0x69); - byte |= 1 << 7; /* enable serial irq function */ - byte &= ~(0xF << 2); - byte |= 4 << 2; /* set NumSerIrqBits=4 */ - pci_write_config8(dev, 0x69, byte); - - byte = pm_ioread(0x61); - byte |= 1 << 1; /* Set to enable NB/SB handshake during IOAPIC interrupt for AMD K8/K7 */ - pm_iowrite(0x61, byte); - - /* disable SMI */ - byte = pm_ioread(0x53); - byte |= 1 << 3; - pm_iowrite(0x53, byte); - - /* power after power fail */ - on = CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL; - get_option(&on, "power_on_after_fail"); - byte = pm_ioread(0x74); - byte &= ~0x03; - if (on) { - byte |= 1 << 0; - } - byte |= 1 << 2; - pm_iowrite(0x74, byte); - printk(BIOS_INFO, "set power %s after power fail\n", on ? "on" : "off"); - - /* sb600 rpr:2.3.3: */ - byte = pm_ioread(0x9A); - byte |= 1 << 5 | 1 << 4 | 1 << 2; - pm_iowrite(0x9A, byte); - - byte = pm_ioread(0x8F); - byte |= 1 << 5; - byte &= ~(1 << 4); - pm_iowrite(0x8F, byte); - - pm_iowrite(0x8B, 0x01); - pm_iowrite(0x8A, 0x90); - pm_iowrite(0x88, 0x10); /* A21 */ - - byte = pm_ioread(0x7C); - byte |= 1 << 0; - pm_iowrite(0x7C, byte); - - byte = pm_ioread(0x68); - byte &= ~(1 << 1); - /* 2.6 */ - byte |= 1 << 2; - pm_iowrite(0x68, byte); - - /* 2.6 */ - byte = pm_ioread(0x65); - byte &= ~(1 << 7); - pm_iowrite(0x65, byte); - - /* 2.3.4 */ - byte = pm_ioread(0x52); - byte &= ~0x2F; - byte |= 0x8; - pm_iowrite(0x52, byte); - - byte = pm_ioread(0x8D); - byte &= ~(1 << 6); - pm_iowrite(0x8D, byte); - - byte = pm_ioread(0x61); - byte &= ~(1 << 2); - pm_iowrite(0x61, byte); - - byte = pm_ioread(0x42); - byte &= ~(1 << 2); - pm_iowrite(0x42, byte); - - /* Set up NMI on errors */ - byte = inb(0x70); /* RTC70 */ - byte_old = byte; - nmi_option = NMI_OFF; - get_option(&nmi_option, "nmi"); - if (nmi_option) { - byte &= ~(1 << 7); /* set NMI */ - printk(BIOS_INFO, "++++++++++set NMI+++++\n"); - } else { - byte |= (1 << 7); /* Can not mask NMI from PCI-E and NMI_NOW */ - printk(BIOS_INFO, "++++++++++no set NMI+++++\n"); - } - byte &= ~(1 << 7); - if (byte != byte_old) { - outb(byte, 0x70); - } - - /* 2.10 IO Trap Settings */ - abcfg_reg(0x10090, 1 << 16, 1 << 16); - - /* ab index */ - pci_write_config32(dev, 0xF0, AB_INDX); - /* Initialize the real time clock */ - cmos_init(0); - - /*3.4 Enabling IDE/PCIB Prefetch for Performance Enhancement */ - abcfg_reg(0x10060, 9 << 17, 9 << 17); - abcfg_reg(0x10064, 9 << 17, 9 << 17); - - /* 3.5 Enabling OHCI Prefetch for Performance Enhancement */ - abcfg_reg(0x80, 1 << 0, 1<< 0); - - /* 3.6 B-Link Client's Credit Variable Settings for the Downstream Arbitration Equation */ - /* 3.7 Enabling Additional Address Bits Checking in Downstream */ - abcfg_reg(0x9c, 3 << 0, 3 << 0); - - /* 3.8 Set B-Link Prefetch Mode */ - abcfg_reg(0x80, 3 << 17, 3 << 17); - - /* 3.9 Enabling Detection of Upstream Interrupts */ - abcfg_reg(0x94, 1 << 20,1 << 20); - - /* 3.10: Enabling Downstream Posted Transactions to Pass Non-Posted - * Transactions for the K8 Platform (for All Revisions) */ - abcfg_reg(0x10090, 1 << 8, 1 << 8); - - /* 3.11:Programming Cycle Delay for AB and BIF Clock Gating */ - /* 3.12: Enabling AB and BIF Clock Gating */ - abcfg_reg(0x10054, 0xFFFF0000, 0x1040000); - abcfg_reg(0x54, 0xFF << 16, 4 << 16); - printk(BIOS_INFO, "3.11, ABCFG:0x54\n"); - abcfg_reg(0x54, 1 << 24, 1 << 24); - printk(BIOS_INFO, "3.12, ABCFG:0x54\n"); - abcfg_reg(0x98, 0x0000FF00, 0x00004700); - - /* 3.13:Enabling AB Int_Arbiter Enhancement (for All Revisions) */ - abcfg_reg(0x10054, 0x0000FFFF, 0x07FF); - - /* 3.14:Enabling L1 on A-link Express */ - axcfg_reg(0x68, 0x00000003, 0x2); - axindxp_reg(0xa0, 0x0000F000, 0x6000); - - abcfg_reg(0x10098, 0xFFFFFFFF, 0x4000); - abcfg_reg(0x04, 0xFFFFFFFF, 0x6); - printk(BIOS_INFO, "sm_init() end\n"); - - /* Enable NbSb virtual channel */ - axcfg_reg(0x114, 0x3f << 1, 0 << 1); - axcfg_reg(0x120, 0x7f << 1, 0x7f << 1); - axcfg_reg(0x120, 7 << 24, 1 << 24); - axcfg_reg(0x120, 1 << 31, 1 << 31); - abcfg_reg(0x50, 1 << 3, 1 << 3); -} - -static int lsmbus_recv_byte(struct device *dev) -{ - u32 device; - struct resource *res; - struct bus *pbus; - - device = dev->path.i2c.device; - pbus = get_pbus_smbus(dev); - - res = find_resource(pbus->dev, 0x10); - - return do_smbus_recv_byte(res->base, device); -} - -static int lsmbus_send_byte(struct device *dev, u8 val) -{ - u32 device; - struct resource *res; - struct bus *pbus; - - device = dev->path.i2c.device; - pbus = get_pbus_smbus(dev); - - res = find_resource(pbus->dev, 0x10); - - return do_smbus_send_byte(res->base, device, val); -} - -static int lsmbus_read_byte(struct device *dev, u8 address) -{ - u32 device; - struct resource *res; - struct bus *pbus; - - device = dev->path.i2c.device; - pbus = get_pbus_smbus(dev); - - res = find_resource(pbus->dev, 0x10); - - return do_smbus_read_byte(res->base, device, address); -} - -static int lsmbus_write_byte(struct device *dev, u8 address, u8 val) -{ - u32 device; - struct resource *res; - struct bus *pbus; - - device = dev->path.i2c.device; - pbus = get_pbus_smbus(dev); - - res = find_resource(pbus->dev, 0x10); - - return do_smbus_write_byte(res->base, device, address, val); -} -static struct smbus_bus_operations lops_smbus_bus = { - .recv_byte = lsmbus_recv_byte, - .send_byte = lsmbus_send_byte, - .read_byte = lsmbus_read_byte, - .write_byte = lsmbus_write_byte, -}; - -static void sb600_sm_read_resources(struct device *dev) -{ - struct resource *res; - u8 byte; - - /* rpr2.14: Hides SM bus controller Bar1 where stores HPET MMIO base address */ - byte = pm_ioread(0x55); - byte |= 1 << 7; - pm_iowrite(0x55, byte); - - /* Get the normal pci resources of this device */ - /* pci_dev_read_resources(dev); */ - - byte = pm_ioread(0x55); - byte &= ~(1 << 7); - pm_iowrite(0x55, byte); - - /* apic */ - res = new_resource(dev, 0x74); - res->base = IO_APIC_ADDR; - res->size = 256 * 0x10; - res->limit = 0xFFFFFFFFUL; /* res->base + res->size -1; */ - res->align = 8; - res->gran = 8; - res->flags = IORESOURCE_MEM | IORESOURCE_FIXED; - - res = new_resource(dev, 0x14); /* hpet */ - res->base = HPET_BASE_ADDRESS; /* reset hpet to widely accepted address */ - res->size = 0x400; - res->limit = 0xFFFFFFFFUL; /* res->base + res->size -1; */ - res->align = 8; - res->gran = 8; - res->flags = IORESOURCE_MEM | IORESOURCE_FIXED; - /* dev->command |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER; */ - - /* smbus */ - res = new_resource(dev, 0x10); - res->base = 0xB00; - res->size = 0x10; - res->limit = 0xFFFFUL; /* res->base + res->size -1; */ - res->align = 8; - res->gran = 8; - res->flags = IORESOURCE_IO | IORESOURCE_FIXED; - - compact_resources(dev); - -} - -static void sb600_sm_set_resources(struct device *dev) -{ - struct resource *res; - u8 byte; - - pci_dev_set_resources(dev); - - /* rpr2.14: Make HPET MMIO decoding controlled by the memory enable bit in command register of LPC ISA bridge */ - byte = pm_ioread(0x52); - byte |= 1 << 6; - pm_iowrite(0x52, byte); - - res = find_resource(dev, 0x74); - pci_write_config32(dev, 0x74, res->base | 1 << 3); - - res = find_resource(dev, 0x14); - pci_write_config32(dev, 0x14, res->base); - - res = find_resource(dev, 0x10); - pci_write_config32(dev, 0x10, res->base | 1); -} - -static struct pci_operations lops_pci = { - .set_subsystem = pci_dev_set_subsystem, -}; - -static struct device_operations smbus_ops = { - .read_resources = sb600_sm_read_resources, - .set_resources = sb600_sm_set_resources, - .enable_resources = pci_dev_enable_resources, - .init = sm_init, - .scan_bus = scan_smbus, - /* .enable = sb600_enable, */ - .ops_pci = &lops_pci, - .ops_smbus_bus = &lops_smbus_bus, -}; - -static const struct pci_driver smbus_driver __pci_driver = { - .ops = &smbus_ops, - .vendor = PCI_VENDOR_ID_ATI, - .device = PCI_DEVICE_ID_ATI_SB600_SM, -}; diff --git a/src/southbridge/amd/sb600/smbus.c b/src/southbridge/amd/sb600/smbus.c deleted file mode 100644 index 990098f1a6..0000000000 --- a/src/southbridge/amd/sb600/smbus.c +++ /dev/null @@ -1,210 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include "smbus.h" - -static inline void smbus_delay(void) -{ - outb(0x80, 0x80); -} - -static int smbus_wait_until_ready(u32 smbus_io_base) -{ - u32 loops; - loops = SMBUS_TIMEOUT; - do { - u8 val; - val = inb(smbus_io_base + SMBHSTSTAT); - val &= 0x1f; - if (val == 0) { /* ready now */ - return 0; - } - outb(val, smbus_io_base + SMBHSTSTAT); - } while (--loops); - return -2; /* time out */ -} - -static int smbus_wait_until_done(u32 smbus_io_base) -{ - u32 loops; - loops = SMBUS_TIMEOUT; - do { - u8 val; - - val = inb(smbus_io_base + SMBHSTSTAT); - val &= 0x1f; /* mask off reserved bits */ - if (val & 0x1c) { - return -5; /* error */ - } - if (val == 0x02) { - outb(val, smbus_io_base + SMBHSTSTAT); /* clear status */ - return 0; - } - } while (--loops); - return -3; /* timeout */ -} - -int do_smbus_recv_byte(u32 smbus_io_base, u32 device) -{ - u8 byte; - - if (smbus_wait_until_ready(smbus_io_base) < 0) { - return -2; /* not ready */ - } - - /* set the device I'm talking to */ - outb(((device & 0x7f) << 1) | 1, smbus_io_base + SMBHSTADDR); - - byte = inb(smbus_io_base + SMBHSTCTRL); - byte &= 0xe3; /* Clear [4:2] */ - byte |= (1 << 2) | (1 << 6); /* Byte data read/write command, start the command */ - outb(byte, smbus_io_base + SMBHSTCTRL); - - /* poll for transaction completion */ - if (smbus_wait_until_done(smbus_io_base) < 0) { - return -3; /* timeout or error */ - } - - /* read results of transaction */ - byte = inb(smbus_io_base + SMBHSTCMD); - - return byte; -} - -int do_smbus_send_byte(u32 smbus_io_base, u32 device, u8 val) -{ - u8 byte; - - if (smbus_wait_until_ready(smbus_io_base) < 0) { - return -2; /* not ready */ - } - - /* set the command... */ - outb(val, smbus_io_base + SMBHSTCMD); - - /* set the device I'm talking to */ - outb(((device & 0x7f) << 1) | 0, smbus_io_base + SMBHSTADDR); - - byte = inb(smbus_io_base + SMBHSTCTRL); - byte &= 0xe3; /* Clear [4:2] */ - byte |= (1 << 2) | (1 << 6); /* Byte data read/write command, start the command */ - outb(byte, smbus_io_base + SMBHSTCTRL); - - /* poll for transaction completion */ - if (smbus_wait_until_done(smbus_io_base) < 0) { - return -3; /* timeout or error */ - } - - return 0; -} - -int do_smbus_read_byte(u32 smbus_io_base, u32 device, u32 address) -{ - u8 byte; - - if (smbus_wait_until_ready(smbus_io_base) < 0) { - return -2; /* not ready */ - } - - /* set the command/address... */ - outb(address & 0xff, smbus_io_base + SMBHSTCMD); - - /* set the device I'm talking to */ - outb(((device & 0x7f) << 1) | 1, smbus_io_base + SMBHSTADDR); - - byte = inb(smbus_io_base + SMBHSTCTRL); - byte &= 0xe3; /* Clear [4:2] */ - byte |= (1 << 3) | (1 << 6); /* Byte data read/write command, start the command */ - outb(byte, smbus_io_base + SMBHSTCTRL); - - /* poll for transaction completion */ - if (smbus_wait_until_done(smbus_io_base) < 0) { - return -3; /* timeout or error */ - } - - /* read results of transaction */ - byte = inb(smbus_io_base + SMBHSTDAT0); - - return byte; -} - -int do_smbus_write_byte(u32 smbus_io_base, u32 device, u32 address, u8 val) -{ - u8 byte; - - if (smbus_wait_until_ready(smbus_io_base) < 0) { - return -2; /* not ready */ - } - - /* set the command/address... */ - outb(address & 0xff, smbus_io_base + SMBHSTCMD); - - /* set the device I'm talking to */ - outb(((device & 0x7f) << 1) | 0, smbus_io_base + SMBHSTADDR); - - /* output value */ - outb(val, smbus_io_base + SMBHSTDAT0); - - byte = inb(smbus_io_base + SMBHSTCTRL); - byte &= 0xe3; /* Clear [4:2] */ - byte |= (1 << 3) | (1 << 6); /* Byte data read/write command, start the command */ - outb(byte, smbus_io_base + SMBHSTCTRL); - - /* poll for transaction completion */ - if (smbus_wait_until_done(smbus_io_base) < 0) { - return -3; /* timeout or error */ - } - - return 0; -} - -static void alink_ab_indx(u32 reg_space, u32 reg_addr, u32 mask, u32 val) -{ - u32 tmp; - - outl((reg_space & 0x3) << 30 | reg_addr, AB_INDX); - tmp = inl(AB_DATA); - - tmp &= ~mask; - tmp |= val; - - /* printk(BIOS_DEBUG, "about write %x, index=%x", tmp, (reg_space&0x3)<<30 | reg_addr); */ - outl((reg_space & 0x3) << 30 | reg_addr, AB_INDX); /* probably we don't have to do it again. */ - outl(tmp, AB_DATA); -} - -/* space = 0: AX_INDXC, AX_DATAC -* space = 1: AX_INDXP, AX_DATAP - */ -static void alink_ax_indx(u32 space /*c or p? */ , u32 axindc, - u32 mask, u32 val) -{ - u32 tmp; - - /* read axindc to tmp */ - outl(space << 30 | space << 3 | 0x30, AB_INDX); - outl(axindc, AB_DATA); - outl(space << 30 | space << 3 | 0x34, AB_INDX); - tmp = inl(AB_DATA); - - tmp &= ~mask; - tmp |= val; - - /* write tmp */ - outl(space << 30 | space << 3 | 0x30, AB_INDX); - outl(axindc, AB_DATA); - outl(space << 30 | space << 3 | 0x34, AB_INDX); - outl(tmp, AB_DATA); -} diff --git a/src/southbridge/amd/sb600/smbus.h b/src/southbridge/amd/sb600/smbus.h deleted file mode 100644 index bdfe3fa7b5..0000000000 --- a/src/southbridge/amd/sb600/smbus.h +++ /dev/null @@ -1,60 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef SB600_SMBUS_H -#define SB600_SMBUS_H - -#define SMBHSTSTAT 0x0 -#define SMBSLVSTAT 0x1 -#define SMBHSTCTRL 0x2 -#define SMBHSTCMD 0x3 -#define SMBHSTADDR 0x4 -#define SMBHSTDAT0 0x5 -#define SMBHSTDAT1 0x6 -#define SMBHSTBLKDAT 0x7 - -#define SMBSLVCTRL 0x8 -#define SMBSLVCMD_SHADOW 0x9 -#define SMBSLVEVT 0xa -#define SMBSLVDAT 0xc - -#define AX_INDXC 0 -#define AX_INDXP 1 -#define AXCFG 2 -#define ABCFG 3 - -#define AB_INDX 0xCD8 -#define AB_DATA (AB_INDX+4) - -/* Between 1-10 seconds, We should never timeout normally - * Longer than this is just painful when a timeout condition occurs. - */ -#define SMBUS_TIMEOUT (100*1000*10) - -#define abcfg_reg(reg, mask, val) \ - alink_ab_indx((ABCFG), (reg), (mask), (val)) -#define axcfg_reg(reg, mask, val) \ - alink_ab_indx((AXCFG), (reg), (mask), (val)) -#define axindxc_reg(reg, mask, val) \ - alink_ax_indx(0, (reg), (mask), (val)) -#define axindxp_reg(reg, mask, val) \ - alink_ax_indx(1, (reg), (mask), (val)) - -int do_smbus_recv_byte(u32 smbus_io_base, u32 device); -int do_smbus_send_byte(u32 smbus_io_base, u32 device, u8 val); -int do_smbus_read_byte(u32 smbus_io_base, u32 device, u32 address); -int do_smbus_write_byte(u32 smbus_io_base, u32 device, u32 address, u8 val); - -#endif diff --git a/src/southbridge/amd/sb600/usb.c b/src/southbridge/amd/sb600/usb.c deleted file mode 100644 index 85df6c5989..0000000000 --- a/src/southbridge/amd/sb600/usb.c +++ /dev/null @@ -1,168 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include -#include -#include -#include -#include -#include -#include -#include "sb600.h" - -static struct pci_operations lops_pci = { - .set_subsystem = pci_dev_set_subsystem, -}; - -static void usb_init(struct device *dev) -{ - u8 byte; - u16 word; - u32 dword; - - /* Enable OHCI0-4 and EHCI Controllers */ - struct device *sm_dev; - sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); - byte = pci_read_config8(sm_dev, 0x68); - byte |= 0x3F; - pci_write_config8(sm_dev, 0x68, byte); - - /* RPR 5.2 Enables the USB PME Event,Enable USB resume support */ - byte = pm_ioread(0x61); - byte |= 1 << 6; - pm_iowrite(0x61, byte); - byte = pm_ioread(0x65); - byte |= 1 << 2; - pm_iowrite(0x65, byte); - - /* RPR 5.3 Support USB device wakeup from the S4/S5 state */ - byte = pm_ioread(0x65); - byte &= ~(1 << 0); - pm_iowrite(0x65, byte); - - /* RPR 5.6 Enable the USB controller to get reset by any software that generate a PCIRst# condition */ - byte = pm_ioread(0x65); - byte |= (1 << 4); - pm_iowrite(0x65, byte); - - /* RPR 5.11 Disable OHCI MSI Capability */ - word = pci_read_config16(dev, 0x40); - word |= (0x1F << 8); - pci_write_config16(dev, 0x40, word); - - /* RPR 5.8 Disable the OHCI Dynamic Power Saving feature */ - dword = pci_read_config32(dev, 0x50); - dword &= ~(1 << 16); - pci_write_config32(dev, 0x50, dword); - - /* RPR 5.12 Enable prevention of OHCI accessing the invalid system memory address range */ - word = pci_read_config16(dev, 0x50); - word |= 1 << 15; - pci_write_config16(dev, 0x50, word); - - /* RPR 5.15 Disable SMI handshake in between USB and ACPI for USB legacy support. */ - /* The BIOS should always set this bit to prevent the malfunction on USB legacy keyboard/mouse support */ - word = pci_read_config16(dev, 0x50); - word |= 1 << 12; - pci_write_config16(dev, 0x50, word); -} - -static void usb_init2(struct device *dev) -{ - u8 byte; - u16 word; - u32 dword; - void *usb2_bar0; - /* dword = pci_read_config32(dev, 0xf8); */ - /* dword |= 40; */ - /* pci_write_config32(dev, 0xf8, dword); */ - - usb2_bar0 = (void *)(pci_read_config32(dev, 0x10) & ~0xFF); - printk(BIOS_INFO, "usb2_bar0=0x%p\n", usb2_bar0); - - /* RPR5.4 Enables the USB PHY auto calibration resister to match 45ohm resistance */ - dword = 0x00020F00; - write32(usb2_bar0 + 0xC0, dword); - - /* RPR5.5 Sets In/OUT FIFO threshold for best performance */ - dword = 0x00200040; - write32(usb2_bar0 + 0xA4, dword); - - /* RPR5.9 Disable the EHCI Dynamic Power Saving feature */ - word = read16(usb2_bar0 + 0xBC); - word &= ~(1 << 12); - write16(usb2_bar0 + 0xBC, word); - - /* RPR5.10 Disable EHCI MSI support */ - byte = pci_read_config8(dev, 0x50); - byte |= (1 << 6); - pci_write_config8(dev, 0x50, byte); - - /* RPR5.13 Disable C3 time enhancement feature */ - dword = pci_read_config32(dev, 0x50); - dword &= ~(1 << 28); - pci_write_config32(dev, 0x50, dword); - - /* EHCI Erratum (adapted from Linux) */ - dword = pci_read_config32(dev, 0x53); - dword |= (1 << 3); - pci_write_config32(dev, 0x53, dword); - - /* RPR5.14 Disable USB PHY PLL Reset signal to come from ACPI */ - byte = pci_read_config8(dev, 0x54); - byte &= ~(1 << 0); - pci_write_config8(dev, 0x54, byte); -} - -static struct device_operations usb_ops = { - .read_resources = pci_ehci_read_resources, - .set_resources = pci_dev_set_resources, - .enable_resources = pci_dev_enable_resources, - .init = usb_init, - /*.enable = sb600_enable, */ - .scan_bus = 0, - .ops_pci = &lops_pci, -}; - -static const unsigned short usb_ids[] = { - PCI_DEVICE_ID_ATI_SB600_USB_0, - PCI_DEVICE_ID_ATI_SB600_USB_1, - PCI_DEVICE_ID_ATI_SB600_USB_2, - PCI_DEVICE_ID_ATI_SB600_USB_3, - PCI_DEVICE_ID_ATI_SB600_USB_4, - 0, -}; - -static const struct pci_driver usb_0_driver __pci_driver = { - .ops = &usb_ops, - .vendor = PCI_VENDOR_ID_ATI, - .devices= usb_ids, -}; - -static struct device_operations usb_ops2 = { - .read_resources = pci_ehci_read_resources, - .set_resources = pci_dev_set_resources, - .enable_resources = pci_dev_enable_resources, - .init = usb_init2, - /*.enable = sb600_enable, */ - .scan_bus = 0, - .ops_pci = &lops_pci, -}; - -static const struct pci_driver usb_5_driver __pci_driver = { - .ops = &usb_ops2, - .vendor = PCI_VENDOR_ID_ATI, - .device = PCI_DEVICE_ID_ATI_SB600_USB2, -}; -- cgit v1.2.3