From a413ecc6cd84c964456f2e76972a8f1379fc9c6f Mon Sep 17 00:00:00 2001
From: Li-Ta Lo <ollie@lanl.gov>
Date: Mon, 13 Mar 2006 22:18:39 +0000
Subject: added early_setup.c removed some messages

git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2194 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
---
 src/southbridge/amd/cs5535/cs5535_early_setup.c | 113 ++++++++++++++++++++++++
 src/southbridge/amd/cs5535/cs5535_early_smbus.c |   2 +-
 2 files changed, 114 insertions(+), 1 deletion(-)
 create mode 100644 src/southbridge/amd/cs5535/cs5535_early_setup.c

(limited to 'src/southbridge/amd/cs5535')

diff --git a/src/southbridge/amd/cs5535/cs5535_early_setup.c b/src/southbridge/amd/cs5535/cs5535_early_setup.c
new file mode 100644
index 0000000000..ae3b7df441
--- /dev/null
+++ b/src/southbridge/amd/cs5535/cs5535_early_setup.c
@@ -0,0 +1,113 @@
+/*
+ *
+ * cs5535_early_setup.c:	Early chipset initialization for CS5535 companion device
+ *
+ *
+ * This file implements the initialization sequence documented in section 4.2 of
+ * AMD Geode GX Processor CS5535 Companion Device GoedeROM Porting Guide.
+ *
+ */
+
+#define CS5535_GLINK_PORT_NUM	0x02	/* the geode link port number to the CS5535 */       
+#define CS5535_DEV_NUM 		0x0F	/* default PCI device number for CS5535 */
+
+/**
+ * @brief Setup PCI IDSEL for CS5535
+ *
+ * 
+ */
+
+static void cs5535_setup_extmsr(void)
+{
+	msr_t msr;
+
+	/* forward MSR access to CS5535_GLINK_PORT_NUM to CS5535_DEV_NUM */
+	msr.hi = msr.lo = 0x00000000;
+	if (CS5535_GLINK_PORT_NUM <= 4) {
+		msr.lo = CS5535_DEV_NUM << ((CS5535_GLINK_PORT_NUM - 1) * 8);
+	} else {
+		msr.hi = CS5535_DEV_NUM << ((CS5535_GLINK_PORT_NUM - 5) * 8);
+	}
+	wrmsr(0x5000201e, msr);
+}
+
+static void cs5535_setup_idsel(void)
+{
+	/* write IDSEL to the write once register at address 0x0000 */
+	outl(0x1 << (CS5535_DEV_NUM + 10), 0);
+}
+
+static int cs5535_setup_iobase(void)
+{
+	msr_t msr;
+
+	/* setup LBAR for SMBus controller */
+	__builtin_wrmsr(0x5140000b, 0x00006000, 0x0000f001);
+	/* setup LBAR for GPIO */
+	__builtin_wrmsr(0x5140000c, 0x00006100, 0x0000f001);
+	/* setup LBAR for MFGPT */
+	__builtin_wrmsr(0x5140000d, 0x00006200, 0x0000f001);
+	/* setup LBAR for ACPI */
+	__builtin_wrmsr(0x5140000e, 0x00009c00, 0x0000f001);
+	/* setup LBAR for MFGPT */
+	__builtin_wrmsr(0x5140000f, 0x00009d00, 0x0000f001);
+}
+
+static void cs5535_setup_gpio(void)
+{
+	uint32_t val;
+
+	/* setup GPIO pins 14/15 for SDA/SCL */
+	val = (1<<14 | 1<<15);
+	/* Output Enable */
+	outl(0x3fffc000, 0x6100 + 0x04);
+	//outl(val, 0x6100 + 0x04);
+	/* Output AUX1 */
+	outl(0x3fffc000, 0x6100 + 0x10);
+	//outl(val, 0x6100 + 0x10);
+	/* Input Enable */
+	//outl(0x0f5af0a5, 0x6100 + 0x20);
+	outl(0x3fffc000, 0x6100 + 0x20);
+	//outl(val, 0x6100 + 0x20);
+	/* Input AUX1 */
+	//outl(0x3ffbc004, 0x6100 + 0x34);
+	outl(0x3fffc000, 0x6100 + 0x34);
+	//outl(val, 0x6100 + 0x34);
+}
+
+static void cs5535_setup_cis_mode(void)
+{
+	msr_t msr;
+
+	/* setup CPU interface serial to mode C on both sides */
+	msr = __builtin_rdmsr(0x51000010);
+	msr.lo &= ~0x18;
+	msr.lo |= 0x10;
+	__builtin_wrmsr(0x51000010, msr.lo, msr.hi);
+	__builtin_wrmsr(0x54002010, 0x00000002, 0x00000000);
+}
+
+static void dummy(void)
+{
+}
+
+static int cs5535_early_setup(void)
+{
+	msr_t msr;
+
+	cs5535_setup_extmsr();
+
+	msr = rdmsr(0x4c000014);
+	if (msr.lo & (0x3f << 26)) {
+		/* PLL is already set and we are reboot from PLL reset */
+		print_debug("reboot from BIOS reset\n\r");
+		return;
+	}
+	cs5535_setup_idsel();
+	cs5535_setup_iobase();
+	cs5535_setup_gpio();
+	cs5535_setup_cis_mode();
+	cs5535_enable_smbus();
+	//get_memory_speed();
+	dummy();
+}
diff --git a/src/southbridge/amd/cs5535/cs5535_early_smbus.c b/src/southbridge/amd/cs5535/cs5535_early_smbus.c
index b7dd436887..adc4c5e090 100644
--- a/src/southbridge/amd/cs5535/cs5535_early_smbus.c
+++ b/src/southbridge/amd/cs5535/cs5535_early_smbus.c
@@ -11,7 +11,7 @@ static int cs5535_enable_smbus(void)
 
 	/* Set SCL freq and enable SMB controller */
 	val = inb(SMBUS_IO_BASE + SMB_CTRL2);
-	val |= ((0x7F << 1) | SMB_CTRL2_ENABLE);
+	val |= ((0x20 << 1) | SMB_CTRL2_ENABLE);
 	outb(val, SMBUS_IO_BASE + SMB_CTRL2);
 
 	/* Setup SMBus host controller address to 0xEF */
-- 
cgit v1.2.3