From 3914a316c3d3ab1ba45fe33394f37aaefdc62d61 Mon Sep 17 00:00:00 2001 From: Jens Rottmann Date: Tue, 19 Feb 2013 15:01:06 +0100 Subject: AMD SB800: don't switch clock from 14 to 48 MHz for smscsuperio The power up default for the 14M_25M_48M_OSC switchable clock output ball of the SB800 chipset is 14 MHz. sb800/bootblock.c changes this to 48 MHz, which is the correct value for almost all SIOs. However, not for 'smscsuperio' (SMSC SCH311x), which needs the original 14 MHz and is not configurable for other clock speeds. A wrong SIO clock supply results in funny RS232 output (wrong bit speed) and non-working PS/2. We could switch back to 14 MHz in the mainboard's romstage.c, but then the clock frequency would change twice. The resulting short 48 MHz burst causes a handful of rubbish characters on RS232 on every boot until the SIO clock has stabilized again. This patch skips the SB800 clock switch if the SIO Kconfig requests 14 MHz. This does not affect any boards currently in the repository (yet). Change-Id: Icff41fd88dc41c08f3700ab4f786852f04eff2a4 Signed-off-by: Jens Rottmann Reviewed-on: http://review.coreboot.org/2454 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel Reviewed-by: Martin Roth --- src/southbridge/amd/cimx/sb800/bootblock.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) (limited to 'src/southbridge/amd/cimx') diff --git a/src/southbridge/amd/cimx/sb800/bootblock.c b/src/southbridge/amd/cimx/sb800/bootblock.c index 8ed198a9e4..d21b4fdbfd 100644 --- a/src/southbridge/amd/cimx/sb800/bootblock.c +++ b/src/southbridge/amd/cimx/sb800/bootblock.c @@ -97,10 +97,17 @@ static void enable_clocks(void) reg8 &= ~(1 << 1); outb(reg8, 0xCD7); - // Program SB800 MiscCntrl Device_CLK1_sel for 48 MHz (default is 14 MHz) + // Program SB800 MiscClkCntrl register to configure clock output on the + // 14M_25M_48M_OSC ball usually used for the Super-I/O. + // Almost all SIOs need 48 MHz, only the SMSC SCH311x wants 14 MHz, + // which is the SB800's power up default. We could switch back to 14 + // in the mainboard's romstage.c, but then the clock frequency would + // change twice. reg32 = *acpi_mmio; - reg32 &= ~((1 << 0) | (1 << 2)); - reg32 |= 1 << 1; + reg32 &= ~((1 << 2) | (3 << 0)); // enable, 14 MHz (power up default) +#if !CONFIG_SUPERIO_WANTS_14MHZ_CLOCK + reg32 |= 2 << 0; // Device_CLK1_sel = 48 MHz +#endif *acpi_mmio = reg32; } -- cgit v1.2.3